Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGW 060202 DX140 Wendeplatten - Tungaloy
Take advantage of high cutting speed and exceptional wear resistance for efficient machining of aluminium and non-ferrous materials, combined with precise ISO compatibility for straightforward tool system integration. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. CCGW 060202 DX140 ISO turning insert — Tungaloy, PCD grade for aluminium machining A CCGW060202 DX140 indexable insert engineered for high-speed turning of aluminium and other non-ferrous and abrasive non-metallic materials. PCD cutting material for long tool life Rhombic shape, size 06 0.2 mm corner radius for fine finishes 7° relief angle for positive cutting Hole with cylindrical bore and one-sided countersink (40°–60°) Faster cycles and predictable tool life for aluminium components The polycrystalline diamond (PCD) cutting layer delivers high cutting speed capability and long tool life when machining aluminium and similar non-ferrous materials. The combination of a carbide substrate and a PCD cutting edge reduces flank wear and abrasion, which in turn lowers tool-change frequency and increases uptime. For production environments where cycle time and repeatability matter, this geometry supports consistent component quality and predictable tool costs over long runs. Geometry engineered for surface quality and chip control The rhombic plate form with an included angle of 80° and a 0.2 mm corner radius produces fine surface finishes while preserving edge strength. The 7° relief angle provides a positive engagement that reduces cutting forces and heat generation, helping to maintain dimensional accuracy. Although the insert is supplied without a dedicated chipbreaker, the PCD grade exhibits smooth shearing on soft, gummy alloys; selecting a matching toolholder and cutting parameters optimises chip evacuation and workpiece integrity. Substrate and grade benefits for abrasive applications The substrate material is carbide, supporting the deposition and bonding of the DX140 PCD cutting material. This arrangement gives the insert excellent resistance to abrasive inclusions often present in non-metallic workpieces and certain aluminium alloys. The DX140 grade is tailored for productive machining: it enables higher surface footage and extended edge life compared with conventional carbide grades, which translates into fewer interruptions and lower overall tooling consumption. Straightforward integration into ISO tool systems As an ISO-format turning insert, compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness. The insert’s size 06, thickness 2.38 mm, and the centre hole with cylindrical bore plus one-sided countersink (40°–60°) match common clamping systems, allowing easy retrofitting into existing assemblies comprising an outer holder or a boring bar plus the correct seat and clamp set. Ensure the chosen holder supports PCD tooling for optimal rigidity and cooling strategies. Practical recommendations for process setup When switching to PCD inserts like this grade, increase cutting speeds compared with carbide tooling while maintaining moderate feed to protect the edge form. Coolant strategies and toolpath planning should focus on stable clamping and efficient chip removal. The ISO designation and standardised geometry simplify spare management in production, allowing quick swaps without extensive setup changes and supporting lean inventory practices. For high-speed, long-life machining of aluminium and non-ferrous components, specify the DX140 PCD insert from Tungaloy and consult Metav Werkzeuge for availability and application guidance. Technical data Article number: 6801358 Manufacturer SKU: TUN6801358 Stock SKU: 6801358-Tungaloy Model series: ISO turning inserts Facts Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Size: 06 Design and features Shape: rhombic Hole: with cylindrical bore and one-sided countersink (40°–60°) Grade: DX140 Cutting material: PCD (polycrystalline diamond) Substrate: carbide Application: turning ISO designation: CCGW060202 FAQ What materials is this insert suitable for? The DX140 grade with PCD cutting material is designed primarily for aluminium, other non-ferrous metals and abrasive non-metallic materials; it provides high cutting speed capability and extended wear resistance for these substrates. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius balances edge strength and surface quality, enabling finer finishes on thin-walled and delicate workpieces while maintaining sufficient robustness for continuous production. Is the insert compatible with standard ISO holders? The CCGW060202 insert follows ISO geometry; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness. The 2.38 mm thickness and size 06 align with common clamping systems. Why choose a PCD grade like DX140 over carbide? DX140 provides superior abrasion resistance and edge life on non-ferrous and abrasive materials, allowing higher cutting speeds and reduced tool-change frequency compared with conventional carbide inserts. What is the significance of the hole with countersink? The central hole with cylindrical bore and one-sided countersink (40°–60°) ensures secure clamping and precise axial positioning in many indexable holder designs, improving repeatability during tool indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 060202 IB10HC Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts CCGW 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCGW060202-M2IB10HC Facts for the tool: ISO-Code: CCGW060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IB10HC with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Series: TURNING CBN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCGW-060202-IB10HC-ISCAR 40END
CCGW 060202 IB10HC Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for CCGW 060202 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCGW060202-F2IB10HC Facts / Figures: ISO-Code: CCGW060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IB10HC with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Series: TURNING CBN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCGW-060202-IB10HC-ISCAR 40END
CCGW 060202 IB20HC Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product specifications for insert CCGW 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCGW060202-F2IB20HC Series: TURNING CBN ISO-Code: CCGW060202 Grade: IB20HC Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: without Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCGW-060202-IB20HC-ISCAR 40END
CCGW 060202 Indexable Insert for Aluminium - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for CCGW 060202 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGW060202-Aluminium Facts for the tool: ISO-Code: CCGW060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGW-060202-Aluminium-MetavCUT 40END
CCGW 060202 Indexable Insert for Stahl - MetavCUT
Couldn't find the right insert? Don't worry, we're here for you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Features indexable inserts CCGW 060202 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGW060202-CBN-Steel ISO-Code: CCGW060202 Usage for: Steel Material: CBN Form: rhombic Usable to the work on: Stahl Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: without Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGW-060202-Stahl-MetavCUT 40END
CCGW 060202 Indexable Insert for Stahl - MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Specifications for indexable inserts CCGW 060202 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGW060202-Steel ISO-Code: CCGW060202 Material: cemented carbide Form: rhombic Usable to the work on: Stahl Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: without Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGW-060202-Stahl-MetavCUT 40END
CCGW 060202 Indexable Insert for Stainless Steel - MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data CCGW 060202 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGW060202-Stainless Data & Figures: ISO-Code: CCGW060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGW-060202-Stainless Steel-MetavCUT 40END
CCGW 060202 KB5630 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts CCGW 060202 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGW060202S01015C-KB5630-KENNAMETAL Data & Figures: ISO-Code: CCGW060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: KB5630 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGW-060202-KB5630-Kennametal 40END
CCGW 060202 KBH10 Indexable Insert - Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts CCGW 060202 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGW060202S01015MT-KBH10-KENNAMETAL Figures for the tool: ISO-Code: CCGW060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: KBH10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCGW-060202-KBH10-Kennametal 40END
CCGW 060202 KBH20 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product specifications CCGW 060202 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGW060202S01225MT-KBH20-KENNAMETAL Figures for the tool: ISO-Code: CCGW060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: KBH20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCGW-060202-KBH20-Kennametal 40END
CCGW 060202 KBH20 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Performance features CCGW 060202 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGW060202EM-KBH20-KENNAMETAL ISO-Code: CCGW060202 Grade: KBH20 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: without Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGW-060202-KBH20-Kennametal 40END
CCGW 060202 T01030F 7025 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CCGW 060202 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060202T01030F7025-SANDVIK Facts for the tool: ISO-Code: CCGW060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: 7025 Chip Breaker: T01030F with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGW-060202-7025-Sandvik 40END
CCGW 060202 TH10 Wendeplatten - Tungaloy
Benefit from precise ISO compatibility, the sharp TH10 uncoated carbide grade and the rhombic 80° geometry for efficient turning operations. Order the CCGW060202 TH10 insert directly via Metav Werkzeuge or ask our consultants if needed. CCGW060202 TH10 ISO turning insert by Tungaloy — rhombic 80°, 0.2 mm nose A CCGW060202 TH10 indexable insert designed for ISO-compliant external and internal turning, offering low cutting forces and fine surface results. *ISO-standard rhombic insert, 80° geometry *Uncoated carbide grade TH10 for low cutting forces *0.2 mm nose radius for fine surface finishes *Cylindrical hole with single-sided countersink Reliable ISO performance for precise turning The insert is manufactured to an ISO-standard geometry, ensuring predictable seating and repeatable results in any ISO-compatible holder. The rhombic shape with an effective 80° cutting angle provides a stable cutting edge for both facing and profiling tasks. Built for routine production, this geometry supports consistent tool life and reduces the need for frequent re‑alignment, which helps maintain production flow and reduces downtime. Lower cutting forces and improved surface finish The TH10 grade is an uncoated carbide developed for applications where a sharp, clean cutting edge is preferable. Its design reduces cutting forces, particularly when machining non-ferrous materials and softer alloys, and supports smoother surface finishes at moderate feeds. The small 0.2 mm nose radius assists in producing fine surface quality while retaining dimensional control, making the insert well suited to finishing passes and delicate turning operations. System compatibility and practical setup benefits Compatibility with the toolholder is determined by form, clearance angle, tolerance class, clamping method, size and thickness; this insert integrates into the typical ISO turning system comprising the indexable plate, a compatible external holder or boring bar, and the required shim and clamp set. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to match standard clamping screws and ensure secure fixation. Note that the design is supplied without a chipbreaker, so machining parameters should be chosen to match chip control requirements. Material characteristics and recommended applications Made from a solid carbide substrate and specified under the TH10 variety, the insert is particularly effective for turning tasks where a clean edge and low cutting resistance are priorities. It is intended for general turning use, both external and internal, and performs reliably when paired with appropriate feeds and speeds for the material in hand. For operations requiring aggressive chip control or heavy roughing, select cutters or grades with integrated chipbreakers and different coatings. For application advice, sample recommendations or to request a tailored quotation for the Tungaloy CCGW060202 TH10 turning insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants are available to assist. Technical data Article number: 6801357 Manufacturer SKU: TUN6801357 Metav SKU: 6801357-Tungaloy Name: CCGW060202 TH10 Tungaloy insert ISO designation: CCGW060202 Facts Angle: 80° Clearance angle: 7° Nose radius: 0.2 mm Thickness: 2.38 mm Size: 06 Special features Carbide substrate Uncoated grade TH10 Rhombic plate form With hole; cylindrical hole + single-sided countersink (40°–60°) No chipbreaker Intended application: turning ISO turning indexable insert series FAQ What holders are compatible with this insert? Compatibility is determined by the ISO form, clearance angle, tolerance class, clamping and size; the CCGW060202 TH10 insert fits ISO-standard holders sized for a 06 rhombic plate. Which materials is the TH10 grade best for? The TH10 uncoated carbide grade suits non-ferrous materials and applications where a sharp, clean cutting edge and reduced cutting forces are required. Does this insert include a chipbreaker? No, the plate is supplied without a chipbreaker; machining parameters should be adapted or an alternative grade with chip control chosen for heavy chip-forming operations. For which operations is this insert recommended? The insert is intended for both external and internal turning, especially finishing and light to medium cutting where surface quality and low forces are important. How does the 0.2 mm nose radius affect surface finish? A 0.2 mm nose radius helps achieve finer surface finishes and better dimensional accuracy during finishing passes, while requiring appropriate feed rates to avoid premature edge loading. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 060204 7015 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product features CCGW 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204S01020F7015-SANDVIK Data/ Figures: ISO-Code: CCGW060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 7015 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGW-060204-7015-Sandvik 40END
CCGW 060204 7015 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Information on technical features for indexable inserts CCGW 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204S01030F7015-SANDVIK Data & Figures: ISO-Code: CCGW060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 7015 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCGW-060204-7015-Sandvik 40END
CCGW 060204 7015 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for CCGW 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204T01030F7015-SANDVIK Figures for the tool: ISO-Code: CCGW060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 7015 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGW-060204-7015-Sandvik 40END
CCGW 060204 7015 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Information on technical features indexable inserts CCGW 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204T01030FWH7015-SANDVIK ISO-Code: CCGW060204 Grade: 7015 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: without Manufacturer: Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGW-060204-7015-Sandvik 40END
CCGW 060204 7105 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts CCGW 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204S01020F7105-SANDVIK Data & Figures: ISO-Code: CCGW060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 7105 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGW-060204-7105-Sandvik 40END
CCGW 060204 7105 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts CCGW 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204S01520FWG7105-SANDVIK ISO-Code: CCGW060204 Grade: 7105 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: without Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGW-060204-7105-Sandvik 40END
CCGW 060204 7105 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCGW 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204S01520FWH7105-SANDVIK Facts & Figures: ISO-Code: CCGW060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 7105 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGW-060204-7105-Sandvik 40END
CCGW 060204 7115 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product characteristics indexable inserts CCGW 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204S01020F7115-SANDVIK Data & Figures: ISO-Code: CCGW060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 7115 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCGW-060204-7115-Sandvik 40END
CCGW 060204 7115 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Specifications indexable inserts CCGW 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204S01520FWG7115-SANDVIK Facts for the tool: ISO-Code: CCGW060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 7115 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGW-060204-7115-Sandvik 40END
CCGW 060204 7115 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCGW 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGW060204S01520FWH7115-SANDVIK Figures for the tool: ISO-Code: CCGW060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 7115 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCGW-060204-7115-Sandvik 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com