Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT09T308-FN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the WNN10 coated carbide grade, the rhombic 80° geometry and the FN2 chipbreaker to achieve reliable chip control and consistent component quality; order the insert directly via Metav Werkzeuge or consult the sales team for application-specific advice. CCGT09T308-FN2 WNN10 indexable insert — Rhombic 80° shape, 0.8 mm corner radius, Walter Tools CCGT09T308-FN2 WNN10 is a coated carbide indexable insert designed for drilling, boring and turning operations where reproducible cutting behaviour and stable chip formation are required Coated carbide grade WNN10 for broad material range Rhombic 80° geometry for versatile cutting directions 0.8 mm corner radius for precise profile control FN2 chipbreaker for improved chip handling and process stability Strong process security through proven grade and geometry The combination of the WNN10 coating and the rhombic geometry delivers predictable cutting performance that supports repeatable production. The coated carbide matrix provides wear resistance and helps maintain a stable cutting edge over extended runs, translating into fewer interruptions and a higher first-pass yield. When selecting tooling for serial machining, prioritising a stable grade and geometry reduces variability and supports consistent tolerances. Improved chip control and surface quality with FN2 design The FN2 chipbreaker is engineered to channel chips effectively for common turning and boring tasks, reducing re-cutting and the risk of surface damage. The insert’s 0.8 mm corner radius assists in producing clean component edges without excessive cutting forces, while the rhombic 80° form enables effective engagement angles. Together these features support better surface finishes and reduce downstream finishing effort in batch production. Guidance for material use and application planning This insert is supplied in the Walter open-series grade and is a coated carbide product; material suitability should be checked against the specific workpiece and cutting parameters. The grade is intended for a wide range of applications—verify the tooling matrix for optimal cutting speeds and feeds. For mixed-production environments, using a standardised insert like this simplifies tool inventory and shortens setup times while maintaining machining flexibility. Handling, mounting and economic considerations The insert’s standard thickness T3 and form factor allow quick mounting in compatible toolholders and ensure stable clamping. Using an indexable insert with consistent geometry reduces the effort of tool alignment and inspection, which in turn lowers per-part labour cost over serial production. The robust design supports predictable tool-change intervals, helping to plan maintenance windows and minimise unplanned downtime. Contact Metav Werkzeuge for a tailored recommendation of Walter Tools CCGT09T308-FN2 WNN10 inserts and application parameters, or request material-specific cutting data from our consultants at Metav Werkzeuge to ensure the best process outcome. Technical Data SKU: CCGT09T308-FN2-WNN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT09T308-FN2 WNN10 Walter Tools Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WNN10 Chipbreaker: FN2 Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Tolerance class: G Special features Coated carbide (described as coated hard metal in the series) Open series Walter grade for broad application Designed for drilling, boring and turning indexable systems Intended for reliable chip formation and productive machining FAQ What cutting tasks is this insert suited for? The CCGT09T308-FN2 WNN10 insert from Walter Tools is intended for drilling, boring and turning applications where the rhombic 80° geometry and FN2 chipbreaker improve chip control and surface quality. Which workpiece materials are compatible with this grade? The insert is a coated carbide grade WNN10; material suitability depends on the product matrix—check the grade matrix for optimal performance across steels, cast materials and non-ferrous metals before specifying cutting data. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius balances edge strength and profile accuracy: it supports smooth surface finishes while maintaining robustness against edge chipping in common turning and boring operations. Can this insert be used in existing indexable toolholders? The plate follows standard indexable insert forms (rhombic 80°) and thickness T3, making it compatible with matching toolholders designed for this geometry; verify holder compatibility before assembly. What benefits does the FN2 chipbreaker provide in production runs? The FN2 chipbreaker promotes controlled chip flow, which reduces recutting, improves process security and lessens the need for secondary finishing in serial production. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of Walter Tools.
CCGT09T308-MK4 WKK20S Wendeplatten - Walter Tools
Take advantage of a high-performance insert that combines the Tiger·tec Silver coating and the wear-resistant WKK20S grade to deliver stable chip formation and long tool life in cast-iron operations; order directly from Metav Werkzeuge or consult their specialists for tailored recommendations. CCGT09T308-MK4 WKK20S — Turning/drilling indexable insert for cast iron (Tiger·tec Silver) by Walter Tools A CCGT09T308-MK4 WKK20S indexable insert designed for productive machining of cast iron, offering reliable chip control and extended service life. Tiger·tec Silver coating for high wear resistance Optimised for cast iron machining (ISO K) Rhombic 80° shape with 0.8 mm corner radius MK4 chipbreaker for stable chip control 7° relief angle, plate thickness T3 Increased productivity through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKK20S grade provides pronounced wear resistance and consistent edge behaviour when machining abrasive cast-iron materials. Because the grade is tuned to the demands of ISO K workpieces, the insert maintains cutting performance under interrupted cuts and variable chip loads, which leads to reduced tool changes and higher uptime. The result is measurable productivity gains and predictable tool-life cycles in series turning and drilling operations. Reliable cutting geometry for stable machining The Rhombic 80° geometry with a 0.8 mm corner radius and a 7° relief angle creates a balanced edge that resists chipping while ensuring good engagement in turning and reaming tasks. The moderate corner radius supports surface quality without overstressing the tool, and the T3 plate thickness contributes to mechanical stability under radial and axial loads. Together these features enable stable cutting and improved surface finishing in demanding cast-iron applications. Consistent chip control and application scope The MK4 chipbreaker is engineered for controlled breakage of short, brittle chips typical of cast iron, reducing the risk of recoiling and ensuring secure evacuation. This insert is specifically prepared for ISO K materials and is therefore particularly suitable for machining grey and nodular cast iron. When paired with appropriate cutting data and a matching toolholder, the insert supports repeatable process results and lower scrap rates through predictable chip behaviour and edge resilience. Practical selection and integration advice For selection, pair this insert with a rigid toolholder and conservative feed-start parameters to validate process windows; increases in feed or speed can then be introduced stepwise. The insert’s specifications favour shop-floor scenarios where abrasive wear and intermittent cuts are common. If process optimisation or cutting data are required, Metav Werkzeuge’s technical team can advise on feed/speed recommendations and compatible toolholder solutions to achieve maximum efficiency. Contact Metav Werkzeuge for a tailored supply of Walter Tools CCGT09T308-MK4 WKK20S inserts for cast-iron machining and for expert cutting-parameter support: eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data SKU: CCGT09T308-MK4-WKK20S-WALTER Designation: CCGT09T308-MK4 WKK20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKK20S Chipbreaker: MK4 Shape: Rhombic 80° Suitable for: Cast iron (ISO K) Coating: coated carbide (as per series description) FAQ What materials is this insert intended for? This insert is optimised for cast iron work (ISO K); the WKK20S grade and Tiger·tec Silver coating are tuned for abrasive, brittle-chip behaviour typical of cast-iron machining. How does the MK4 chipbreaker benefit the machining process? The MK4 chipbreaker on the CCGT09T308-MK4 WKK20S promotes controlled chip formation and easy evacuation, reducing interruptions and improving process stability during turning and drilling of cast iron. Which geometry advantages does the Rhombic 80° bring? The Rhombic 80° form, combined with a 0.8 mm corner radius and 7° relief, provides a robust edge for interrupted cuts while maintaining surface quality and reducing corner chipping. Is this insert compatible with standard toolholders? The insert follows common indexable-insert dimensions and fits holders designed for the CCGT09T308-MK4 family; compatibility with specific holders should be checked against holder specifications and clamping features. Can this insert be used for continuous high-speed cutting? The Tiger·tec Silver coating and grade WKK20S enhance wear resistance, but cutting parameters should be adjusted to the workpiece and machine capabilities; refer to recommended ranges or consult Metav Werkzeuge for process tuning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the listed brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
CCGT09T308-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WSM01 grade and the MM4 chipbreaker to achieve stable cutting edges and reliable chip control in demanding stainless and heat‑resistant applications; order the CCGT09T308‑MM4 WSM01 directly via Metav Werkzeuge or consult our specialists for tailored application advice. CCGT09T308‑MM4 WSM01 — Drilling/Boring and Turning Indexable Insert, Tiger‑tec Silver — Walter Tools CCGT09T308‑MM4 WSM01 is a coated carbide indexable insert engineered for drilling, boring and versatile turning tasks in tough-to-machine materials, delivering consistent edge stability and controlled chip formation Tiger‑tec Silver coating for extended tool life WSM01 grade optimized for stainless and superalloys MM4 chipbreaker for reliable chip control Rhombus 80° geometry with 0.8 mm nose radius High process reliability for stainless steel and superalloys The CCGT09T308‑MM4 WSM01 insert combines the Tiger‑tec Silver coating with a specialised WSM01 carbide grade to address the typical challenges of machining stainless steel and heat‑resistant superalloys. The selected grade is formulated to resist thermal degradation and reduce the risk of built‑up edge, which in turn stabilises the cutting edge and helps maintain dimensional accuracy over longer tool lives. This directly supports predictable production cycles and reduces unscheduled tool changes, improving overall process efficiency. Precise chip control for consistent surface quality A defining benefit of this geometry is its MM4 chipbreaker paired with a Rhombus 80° form and a 0.8 mm nose radius. Together these features ensure controlled chip segmentation and reliable evacuation in interrupted cuts and difficult materials, which improves surface finish and reduces the need for secondary operations. The insert’s profile is designed to balance cutting forces and contact length, helping to prevent vibration and promoting repeatable part quality in both boring and turning applications. Geometry and clearance tuned for multi‑operation use With a 7° clearance angle and a T3 plate thickness, the insert offers a compromise between edge strength and accessibility in confined bores or complex turning setups. The rhombic shape allows favourable approach angles for drilling/boring tasks while remaining effective for turning passes, making it a practical choice where a single insert must serve multiple operations. The tolerance class G supports consistent seating and interchangeability in standard toolholders, contributing to faster set‑ups and reduced alignment effort. Durable coating and grade for production demands The Tiger‑tec Silver series provides a multilayer coating architecture that improves thermal resistance and adhesion on the cutting edge, while the WSM01 grade emphasises edge stability for tough materials. These combined properties reduce flank wear progression and maintain cutting performance under elevated temperatures commonly encountered when machining stainless steel or superalloys. The outcome is a more economical tool life and fewer interruptions in high‑volume manufacturing contexts. Contact Metav Werkzeuge for application recommendations and to order genuine Walter Tools Tiger‑tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCGT09T308‑MM4‑WSM01‑WALTER SKU: CCGT09T308‑MM4‑WSM01‑WALTER Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Product type: Drilling/Boring and Turning indexable insert Facts Clearance angle: 7° Nose radius: 0.8 mm Plate thickness: T3 Insert size: 09 Tolerance class: G Special features Coating: Tiger‑tec Silver Carbide type: coated carbide (WSM01) Chipbreaker: MM4 Plate form: Rhombus 80° Applications: stainless steel (M), heat‑resistant superalloys and titanium (S) Designation: CCGT09T308‑MM4 WSM01 FAQ What materials is this insert suited for? The CCGT09T308‑MM4 WSM01 is designed primarily for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal stability and improved edge life in these materials. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker promotes controlled chip formation and evacuation, which improves surface finish and reduces interruptions from tangled chips during drilling, boring and turning operations. Can this insert be used for both drilling and turning? Yes — the geometry and Rhombus 80° form make the insert suitable for combined drilling/boring and turning tasks where a robust, multi‑purpose solution is required. What benefit does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances thermal resistance and wear protection, helping to maintain cutting performance and extend tool life under elevated temperatures typical of machining stainless steels and superalloys. Is the insert compatible with standard toolholders? The insert’s tolerance class G and standard CCGT designation indicate compatibility with corresponding indexable insert holders using the same ISO form and clamping systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CCGT09T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the wear‑resistant WSM20S grade and a sturdy 0.8 mm corner radius, this insert offers stable cutting performance in stainless steels and high‑temperature alloys. Order the insert via Metav Werkzeuge or contact the technical consultants for matching recommendations. CCGT09T308-MM4 WSM20S drilling/turning insert — Tiger·tec Silver, suitable for stainless steels (Walter Tools) The CCGT09T308-MM4 WSM20S is a rhombic 80° indexable insert designed for drilling, reaming and turning applications, optimised for rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coating for heat resistance Suitable for stainless steels and superalloys Rhombic 80° insert with 7° clearance 0.8 mm corner radius for robust edge Improved performance in heat‑sensitive materials The Tiger·tec Silver coating combined with the WSM20S grade delivers enhanced thermal stability and wear resistance when machining stainless steels and other difficult‑to‑cut alloys. The coated carbide body supports secure chip formation and reduces edge chipping under elevated cutting temperatures, which translates into more consistent surface finish and extended tool life. This specification is particularly relevant where material toughness and heat generation would otherwise compromise cutting edge integrity. Geometry that stabilises cutting and extends service intervals The rhombic 80° shape and 7° clearance provide an effective balance between cutting strength and accessibility in confined bores or complex turning profiles. The 0.8 mm corner radius increases edge robustness for intermittent cuts and interrupted machining, while the MM4 chipbreaker promotes predictable chip control and reduced built‑up edge. Together, these geometric features contribute to steady tool behaviour and longer operational intervals between index changes. Productivity benefits for batch and mixed‑material work With a focus on reliable chip control and repeatable edge performance, this insert reduces downtime associated with frequent tool changes and regrinding. The combination of a modern coating system and a specially adapted grade means less scrap and fewer cycle interruptions when processing rostfreier Stahl and high‑temperature alloys. For production environments handling mixed materials, the insert’s design helps maintain dimensional accuracy and surface quality across varying component runs. Application notes and compatibility The insert is supplied in the ISO designation CCGT09T308‑MM4 WSM20S and fits toolholders designed for rhombic 80° CCGT‑style indexable inserts with a T3 thickness. The material classification indicates suitability for M (rostfreie Stähle) and S (superlegierungen and titan), ensuring the cutting concept is aligned with the thermal and mechanical demands of these groups. For specific cutting data and holder compatibility, Metav Werkzeuge’s technical literature and advisers can provide the matched parameters for efficient integration. Contact Metav Werkzeuge for application matching and availability of the Walter Tools CCGT09T308‑MM4 WSM20S insert — technical consultancy and delivery support are available through Metav Werkzeuge. Technical data Article number: CCGT09T308‑MM4‑WSM20S‑WALTER Designation: CCGT09T308‑MM4 WSM20S Type: Drilling/Reaming and Turning insert Manufacturer: Walter Tools Facts Coating / series: Tiger·tec Silver Grade: WSM20S Clearance angle: 7° Corner radius: 0.8 mm Insert shape: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: G Special features Chipbreaker: MM4 Material groups: S / M Base material: coated carbide Application: rostfreier Stahl, heat‑resistant superalloys FAQ What materials is this insert suitable for? The CCGT09T308‑MM4 WSM20S is specified for rostfreier Stahl (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), reflecting the WSM20S grade and Tiger·tec Silver coating. Which chipbreaker is fitted and what is its purpose? The insert features the MM4 chipbreaker, which is designed to promote stable chip formation and reduce build‑up, improving surface finish and cutting stability during milling and turning. What does the 0.8 mm corner radius mean for operation? A 0.8 mm corner radius provides a stronger cutting edge for intermittent cuts and enhances edge life, reducing the likelihood of micro‑chipping in demanding stainless and high‑temperature alloy applications. Is this insert compatible with standard CCGT toolholders? The ISO designation CCGT09T308‑MM4 indicates compatibility with holders made for CCGT‑style rhombic 80° inserts with T3 thickness; matching holders and clamping methods should be confirmed for exact seating and run‑out requirements. How does the Tiger·tec Silver technology affect productivity? Tiger·tec Silver coating improves heat resistance and wear behaviour, enabling longer cutting times and more consistent results when machining tough materials, which can increase throughput and reduce tooling costs per component. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT09T308-MN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of a stable uncoated carbide grade WN10, precise rhombic 80° geometry and reliable MN2 chip control for consistent productivity and predictable tool life; secure the right insert for demanding drilling and turning operations via Metav Werkzeuge for procurement or technical guidance. CCGT09T308-MN2 WN10 – drill/reboring and turning indexable insert by Walter Tools (rhombic 80°, MN2 chipbreaker) CCGT09T308-MN2 WN10 is a multifunctional indexable insert for drilling/reboring and turning applications, designed to combine robust uncoated carbide performance with a geometry that supports repeatable machining results. WN10 uncoated carbide grade Rhombic 80° geometry for versatile orientation 0.8 mm corner radius for consistent edge strength MN2 chipbreaker for stable chip control Consistent productivity from a proven carbide grade The combination of the WN10 uncoated carbide grade and the MN2 chipbreaker is engineered for dependable material removal and predictable wear behaviour. The uncoated carbide offers cost-effective performance where coating is not required, supporting productive machining cycles and stable chip formation. This results in fewer interruptions for edge changes and helps maintain throughput in series production. Material suitability should be verified against the product matrix to ensure optimal selection for the intended workpiece. Geometry that improves surface quality and process security A rhombic 80° shape with a 7° clearance angle and a 0.8 mm corner radius creates a favourable cutting geometry for both reboring and turning tasks. The geometry reduces cutting forces while maintaining a robust cutting edge, which helps to enhance surface finish and dimensional consistency. The T3 plate thickness contributes to insert rigidity, making it suitable for operations where stable seating and repeatability are required. These features combined minimise chatter and support reproducible component quality. Practical handling and application guidance for workshop use The insert’s compact 09 size and the specified chipbreaker are aimed at balancing tool life and chip evacuation in typical machining setups. The MN2 chip former is tuned to promote manageable chips in mixed cutting conditions, aiding operator comfort and process cleanliness. As this grade is supplied as uncoated carbide within the Walter cutting grade series, checking the product matrix for substrate compatibility ensures the chosen insert matches the intended material and cutting data. The insert suits customers seeking a clear, technical solution for both drilling/reboring and turning operations. Contact Metav Werkzeuge for application advice on Walter Tools inserts and to arrange supply of CCGT09T308-MN2 WN10 — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CCGT09T308-MN2-WN10-WALTER Article: CCGT09T308-MN2 WN10 Product type: Drill/reboring indexable insert / turning indexable insert Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Tolerance class: G Features Geometry: Rhombic 80° Chipbreaker: MN2 Coating: uncoated carbide Series: Walter cutting grade – open series Material specification: catalog dependent Note: Check product matrix for material suitability FAQ What materials is this insert intended for? The CCGT09T308-MN2 WN10 insert is supplied in an uncoated carbide grade; material suitability must be checked in the Walter product matrix to determine suitability for specific workpiece materials. Which operations can this insert cover? This indexable insert is designed for both drilling/reboring and turning operations, offering a rhombic geometry and chip control that suit mixed production tasks. How does the MN2 chipbreaker affect performance? The MN2 chipbreaker promotes controlled chip formation and evacuation, which supports stable cutting and reduces the likelihood of chip-related surface defects. What technical data identify the insert geometry? Key identifiers are the rhombic 80° shape, 7° clearance, 0.8 mm corner radius and T3 thickness; these determine seating, strength and cutting behaviour. Is the grade coated or uncoated? The WN10 grade used for this insert is an uncoated carbide grade; it is described as part of the Walter cutting grade series and intended where uncoated performance is appropriate. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
CCGT09T308-MN2 WNN10 MN2 Wendeplatten - Walter Tools
Take advantage of the WNN10 coated-carbide grade combined with the MN2 chipbreaker and precise rhombic 80° geometry for stable chip control and consistent productivity; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCGT09T308-MN2 WNN10 – Indexable insert for drilling, boring and turning, Rhombic 80° with 0.8 mm corner radius · Walter Tools The CCGT09T308-MN2 WNN10 is an indexable cutting insert suited to combined drilling/boring and turning tasks where consistent chip control and repeatable edge life are required, especially in mixed production environments. Coated carbide grade WNN10 Rhombic 80° geometry MN2 chipbreaker for stable chips 0.8 mm corner radius for robustness High productivity through material and geometry synergy The insert pairs the WNN10 coated carbide grade with a targeted geometry to deliver reliable cutting performance across a wide range of operations. The combination of a modern coating and the MN2 chipbreaker reduces built-up edge formation and supports continuous cutting cycles, which translates into longer tool life and fewer indexings per component. This results in measurable productivity gains in batch production and reduced process variance, particularly where operators require predictable tool behaviour under varying cutting conditions. Consistent surface finish and tool life from precise geometry The rhombic 80° form and a 7° relief angle create stable cutting engagement and favourable load distribution at the cutting edge, while the 0.8 mm corner radius increases resistance to chipping where intermittent cuts occur. The MN2 chipbreaker aids controlled chip segmentation, lowering the risk of tangling and improving coolant access. Together, these design elements support consistent surface quality and less rework, making the insert well suited to components that demand repeatable dimensional and visual standards. Application guidance and selection tips for production planners This insert is offered in T3 thickness with tolerance class G and insert size 09, specified under the ISO designation CCGT09T308-MN2 WNN10; these data points assist in fixture and toolholder selection. The cutter grade is a coated carbide class, so suitability for particular workpiece materials should be confirmed using the product matrix. For applications requiring special film or substrate characteristics, consult the technical data sheet to match cutting parameters and cooling strategies to the chosen grade and geometry. Contact Metav Werkzeuge for tailored machining advice on Walter Tools inserts such as the WNN10 grade and to arrange supply or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCGT09T308-MN2-WNN10-WALTER ISO designation: CCGT09T308-MN2 WNN10 Product type: Indexable insert for drilling, boring and turning Designation without grade: CCGT09T308-MN2 Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert shape: Rhombic 80° Insert size: 09 Plate thickness: T3 Tolerance class: G Special features Carbide grade: WNN10 (coated carbide) Chipbreaker: MN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material suitability: Check product matrix for specific workpiece materials FAQ What machining operations is this insert designed for? The insert is intended for combined drilling, boring and turning applications; the ISO designation CCGT09T308-MN2 WNN10 identifies it as an indexable insert suited to these tasks under the Walter Tools range. Which materials can be machined with this grade? The WNN10 coated-carbide grade offers broad applicability, but the precise suitability for a given material should be verified in the product matrix and technical sheet for the CCGT09T308-MN2 WNN10 insert. How does the MN2 chipbreaker affect cutting performance? The MN2 chipbreaker promotes controlled chip formation and evacuation, reducing clamping risks and improving coolant penetration, which in turn supports consistent surface finish and extended edge life. How should the insert geometry influence toolholder choice? The rhombic 80° form, 7° relief and 0.8 mm corner radius determine engagement angles and cutting forces; choose a toolholder that secures the ISO seat for CCGT inserts and allows the recommended cutting data to be applied safely. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer Walter Tools.
CCGT09T308-MN2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal stability, a stable cutting edge and precise chip control for reliable productivity in stainless and heat‑resistant alloy turning operations. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. CCGT09T308-MN2 WSM01 – Rhombic 80° turning insert for stainless steels and superalloys (Walter Tools) The CCGT09T308-MN2 WSM01 is a coated indexable turning insert engineered for challenging materials, offering robust edge life and consistent chip formation in stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coating for longer life WSM01 grade for stainless and superalloys Rhombic 80° form with 0.8 mm corner radius 7° clearance angle for secure chip control Consistent chip control for difficult-to-machine alloys The combination of Tiger‑tec Silver surface treatment and the MN2 chipbreaker delivers controlled chip formation when machining ductile or heat‑generating materials. In practice, this means fewer built‑up edges and less unexpected tool chatter when turning stainless steels or nickel‑base alloys. The coated surface reduces adhesion and helps evacuate chips more predictably, which supports steady cycle times and fewer interrupted passes during serial production. Thermal stability and edge security for high cutting loads Designed as a coated carbide grade, WSM01 balances wear resistance with toughness to withstand high thermal loads typical of alloy machining. The tool’s 7° clearance and 0.8 mm corner radius increase mechanical strength at the cutting edge while maintaining acceptable surface finish. This geometry reduces the risk of premature edge breakdown under intermittent cuts and promotes repeatable component tolerances, contributing directly to improved process reliability. Geometry and system compatibility that simplify tool set‑up The rhombic 80° insert form and the T3 plate thickness provide versatility across standard turning toolholders for indexable inserts. The designation CCGT09T308‑MN2 indicates the insert’s size and profile, enabling straightforward selection for existing tool chains and easy replacement without reprogramming tool offsets in most setups. Compatibility with common clamping systems reduces tooling change time and supports smoother integration into established machining cells. Clear productivity advantages and economical operation By favouring a grade tailored to severe applications, the insert supports longer in‑service intervals and more stable surface quality in serial production. Stable cutting behaviour lowers scrap rates and minimises tool changes, which together reduce indirect costs and increase net output per shift. The combination of proven geometry and a heat‑resistant coating contributes to improved productivity and predictable tool performance in demanding turning applications. Contact Metav Werkzeuge for tailored application advice and immediate availability of Walter Tools CCGT09T308-MN2 WSM01 turning inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: CCGT09T308-MN2-WSM01-WALTER Article designation: CCGT09T308-MN2 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Facts Corner radius: 0.8 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Tolerance class: G Special features Rhombic 80° plate form MN2 chipbreaker Coated carbide grade Suitable for stainless steels and heat‑resistant superalloys Indexable turning insert, execution T FAQ What materials is this insert intended for? The CCGT09T308‑MN2 WSM01 insert is designed primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), optimised for safe chip formation and edge stability. How does the Tiger‑tec Silver coating improve performance? Tiger‑tec Silver reduces adhesion and improves thermal resistance, extending tool life and stabilising cutting conditions when machining demanding materials. Can the insert be used in general steel machining? This grade is tuned for difficult‑to‑machine alloys; for standard steels, alternative grades may offer better economy depending on the application and cutting data. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and resistance to chipping under heavy cuts, improving repeatability and surface integrity on turned parts. Is the geometry compatible with standard turning holders? Yes — the rhombic 80° form and T3 thickness make the insert compatible with common indexable turning toolholders, simplifying replacement and set‑up. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are used for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product of Walter Tools.
CCGT09T308-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a proven MP4 chipbreaker and robust rhombic geometry for dependable steel turning; order directly via Metav Werkzeuge or ask the consultants for tailored cutting data. CCGT09T308-MP4 WPP10G turning/boring insert — Tiger‑tec Gold, for steel — Walter Tools The CCGT09T308-MP4 WPP10G is an indexable turning and boring insert engineered for steel applications, offering a balanced mix of wear resistance and reliable chip control in a rhombic 80° form. Tiger‑tec Gold coating for long tool life MP4 chipbreaker for reliable chip control 0.8 mm corner radius for consistent edge strength Rhombic 80° form for versatile turning operations Improved productivity through optimised coating and chip control The combination of Tiger‑tec Gold coating with the graded WPP10G substrate provides measurable improvements in tool life and process stability when machining steels (ISO P). The MP4 chipbreaker supports predictable chip formation and evacuation, which reduces cycle interruptions and increases machining uptime. These characteristics translate into lower tooling costs per part and a more consistent surface finish during medium- to heavy-duty turning operations. Consistent edge life from robust geometry The rhombic 80° shape and a 0.8 mm corner radius deliver a solid cutting edge that resists chipping under intermittent cuts and varying depths of cut. A 7° clearance ensures reliable cutting action and reduces rubbing that accelerates flank wear. Together, these geometric features offer dimensional stability and repeatable performance in serial production, making the insert suitable for a wide range of turning tasks on unalloyed and alloyed steels. Process reliability and practical application guidance Designed for steel according to ISO P, this insert supports stable chip control and predictable wear patterns across common turning routines. The CCGT09T308‑MP4 WPP10G performs well in operations where reproducible surface quality and tool life are priorities. For optimised cutting parameters, substrate matching and toolholder recommendations, Metav Werkzeuge provides application advice and cutting-data support to integrate the insert into existing machining processes. Contact Metav Werkzeuge today to request specific cutting data and to order Walter Tools Tiger‑tec Gold inserts for steel machining applications. Technical data Article number: CCGT09T308-MP4-WPP10G-WALTER Designation: CCGT09T308-MP4 WPP10G Series: Tiger‑tec Gold Grade: WPP10G Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Tolerance class: G Special features Coated carbide, Tiger‑tec Gold Chipbreaker: MP4 Geometry: Rhombic 80° Material group: Steel (ISO P) Application: Turning/boring indexable insert FAQ Which materials are suitable for this insert? This insert is specified for steel (ISO P); the WPP10G grade and Tiger‑tec Gold coating are tailored to the thermal and chip‑forming behaviour typical of unalloyed and alloyed steels. What advantage does the MP4 chipbreaker provide? The MP4 chipbreaker on the insert improves chip control and evacuation, reducing the risk of entanglement and helping to maintain uninterrupted machining cycles with consistent surface quality. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength and resistance to chipping, which is beneficial for semi‑roughing and finishing passes where edge stability and repeatable part geometry are required. Can the insert be used for finishing passes? Yes; thanks to the rhombic 80° geometry and stable grade, the insert can be applied in finishing operations provided cutting parameters are adjusted for the desired surface finish. Where can specific cutting data be obtained? Cutting data and recommendations for the CCGT09T308‑MP4 WPP10G are available from Metav Werkzeuge; the supplier can advise on feeds, speeds and toolholder selection for particular steel grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners; they are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CCGT09T308-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the MP4 chipbreaker for consistent performance, reliable chip control and extended tool life; order the CCGT09T308-MP4 WPP20G directly via Metav Werkzeuge or consult the application specialists for tailored recommendations. CCGT09T308-MP4 WPP20G – Rhombic 80° turning insert, Tiger·tec Gold (Walter Tools) A CCGT09T308-MP4 WPP20G indexable turning and boring insert engineered for steel machining; designed to deliver consistent cutting performance and long service intervals in production turning. Tiger·tec Gold coating for long life Optimised MP4 chipbreaker for steel Rhombic 80° for versatile turning 0.8 mm corner radius for stable edge Reliable performance for steel turning and productivity gains The coated cemented carbide grade WPP20G, part of the Tiger·tec Gold family, is formulated for machining steel (P) where thermal load and chip formation demand resilience. The combination of a robust substrate and a multilayer coating improves wear resistance and cutting-edge stability, which in practice means fewer tool changes and more predictable component quality. As a consequence, cycle times and tool costs per part are reduced through extended tool life and stable cutting behaviour, supporting a more efficient production flow. Geometry and chip control that support repeatable surface quality The Rhombic 80° insert geometry, paired with a 0.8 mm corner radius and a 7° relief angle, provides a balance between strength and accessibility for a range of turning tasks. The MP4 chipbreaker is optimised for steel, producing controllable chips across a variety of feeds and depths of cut; this reduces recutting and improves surface finish. The insert’s T3 thickness and the nominal size designation ensure reliable seating and repeatable clamping in standard toolholders, improving process security on multi-shift production. Practical tool management and application support for shop floors With a tolerance class G and the clear ISO designation, the insert integrates smoothly into established tool management systems and inventory procedures. The grade’s universality for steel machining minimises the need for multiple special-purpose grades, simplifying stockholding while maintaining performance across finishing and light roughing. If any uncertainties remain regarding cut data or holder selection, Metav Werkzeuge offers application advice; detailed specifications and cutting recommendations can be provided on request via email at info@metav-werkzeuge.com or by telephone at +49 2822 7131930. For application-specific selection of Walter Tools inserts such as the CCGT09T308-MP4 WPP20G, contact Metav Werkzeuge for tailored advice and rapid availability. Technical Data SKU: CCGT09T308-MP4-WPP20G-WALTER Article designation: CCGT09T308-MP4 Insert designation: CCGT09T308-MP4 WPP20G Manufacturer: Walter Tools Core dimensions Corner radius: 0.8 mm Relief angle: 7° Insert size: 09 Thickness: T3 Shape: Rhombic 80° Special features Grade: WPP20G (Tiger·tec Gold coating) Chipbreaker: MP4 Tolerance class: G Material application: Steel (P) FAQ Which materials is this insert intended for? The insert is specified for machining steel (P); the WPP20G grade is optimised for the heat and chip formation typical of unalloyed and alloyed steels. What machining tasks suit this insert best? The rhombic 80° geometry and MP4 chipbreaker make it suitable for general turning tasks, including light roughing and finishing operations on steel components. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating enhances wear resistance and edge stability, which translates into longer tool life and more consistent surface quality under typical steel cutting conditions. What chip behaviour can be expected with the MP4 breaker? The MP4 chipbreaker provides controlled chip formation for a wide range of feeds and depths of cut, reducing the risk of long, uncontrollable chips and supporting safe, continuous machining. Are the dimensions and fitment standardised for toolholders? Yes, the insert follows ISO-style designation and the T3 thickness with tolerance class G ensures compatibility with standard toolholder systems designed for rhombic 80° inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer Walter Tools. The Walter AG (market appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group.
CCGT09T308FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Take advantage of the combination of exceptional wear resistance, precise geometry and broad applicability to abrasive non‑ferrous materials for reliable, repeatable machining results. Order the insert directly via Metav Werkzeuge or consult the team for selection and process integration. CCGT09T308FS-1 WDN10 indexable insert for drilling/boring and turning — Walter Tools, PKD grade with 7° relief A robust polycrystalline diamond cutting insert designed for precision machining of abrasive, non‑ferrous materials in demanding industrial environments. PKD grade WDN10 for abrasive non‑ferrous materials Rhombic 80° insert geometry 0.8 mm corner radius for precision finishes 7° relief angle for controlled cutting Improved productivity through durable polycrystalline diamond technology The WDN10 grade is a polycrystalline diamond (PKD) formulation optimised for abrasive, non‑ferrous workpieces. This composition delivers markedly higher wear resistance than conventional carbide grades, extending tool life in applications such as aluminium alloys with abrasive fillers, graphite or non‑ferrous composites. The result is fewer tool changes, reduced downtime and lower overall process costs. The design addresses industrial throughput demands by combining material resilience with a stable cutting edge that maintains geometry over longer component runs. Precision geometry for consistent surface quality and chip control The rhombic 80° form and 0.8 mm corner radius create a balance between strength and fine finish capability, enabling precise contouring and detailed turning operations. The 7° relief angle supports predictable shear and controlled engagement, which helps to maintain dimensional accuracy on finishes and bores. The chipbreaker designation and the insert contour aid consistent chip formation and evacuation, reducing the risk of built‑up edge and improving surface integrity on high‑value components. These geometric choices translate directly into repeatable part quality and simplified process parameter setup. Application guidance and process reliability for shop floor integration This indexable cutting solution is intended for machining abrasive, non‑ferrous materials; check the product matrix for specific material suitability and cutting data. The insert’s PKD nature makes it particularly effective where conventional carbide tools wear quickly. For process planning, consider reduced feed per tooth and stable clamping to exploit the insert’s longevity and prevent chipping. Walter Tools’ open series WDN10 is engineered for predictable performance and is a pragmatic choice when consistent results and fewer tool interventions are priorities in production cycles. Contact Metav Werkzeuge for tailored advice on integrating the Walter Tools CCGT09T308FS-1 WDN10 insert into machining processes and for assistance with selection, cutting data and immediate availability. Technical data Article number: CCGT09T308FS-1-WDN10-WALTER SKU: CCGT09T308FS-1-WDN10-WALTER Designation: CCGT09T308FS-1 WDN10 Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Measurements / core data Corner radius: 0.8 mm Relief (free) angle: 7° Insert shape: Rhombus 80° Insert size: 09 Thickness: T3 Tolerance class: G Special features Grade: WDN10 (polycrystalline diamond, PKD) Application: Abrasive non‑ferrous materials Chipbreaker: 1 Execution: T Material information: Catalogue dependent FAQ What materials is this PKD insert best suited for? The CCGT09T308FS-1 WDN10 insert from Walter Tools is designed primarily for abrasive, non‑ferrous materials such as aluminium alloys with abrasive constituents, graphite and composite substrates; suitability should be confirmed against the specific product matrix. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius provides a compromise between edge strength and finishing capability, helping the insert produce consistent surface quality while resisting chipping during interrupted cuts. Can this insert replace carbide inserts in production? In many abrasive non‑ferrous applications the PKD WDN10 insert offers significantly longer life than carbide; however, process trials are recommended to validate feed and speed settings for the specific component and machine. Is the 7° relief angle important for tool life? Yes, the 7° relief angle influences cutting engagement and shear, contributing to controlled cutting forces and improved tool life when combined with the PKD grade and correct machining parameters. What does the chipbreaker designation mean for machining? The chipbreaker configuration aids consistent chip formation and evacuation, which reduces the risk of built‑up edge and supports surface quality during continuous operations with the CCGT09T308FS-1 WDN10 insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CCGT09T308M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
The combination of a WEP10C cermet grade and an FP2 chipbreaker delivers consistent edge life and superior surface quality for finishing operations; the robust rhombic 80° geometry adds versatility to turning applications. Order the CCGT09T308M-FP2 WEP10C directly via Metav Werkzeuge or ask our consultants if additional selection support is required. CCGT09T308M-FP2 WEP10C – Rhombic 80° cermet turning insert by Walter Tools (FP2 chipbreaker, 0.8 mm nose radius) The CCGT09T308M-FP2 WEP10C is a rhombic 80° turning insert designed for precision finishing and light-roughing tasks in modern production environments. Cermet grade WEP10C for excellent surface finish FP2 chipbreaker for stable, predictable chips Rhombic 80° geometry for universal turning applications 0.8 mm corner radius with 7° relief for fine finishes Achieve consistent, high-quality surface finishes with cermet technology The Walter Cermet grade WEP10C combines a hard ceramic-like matrix with metallic binders to deliver a cutting edge that resists wear while producing a refined workpiece surface. Because cermet grades reduce built-up edge and maintain geometry under finishing conditions, the result is a consistent surface finish and extended part-to-part repeatability. For operations where a superior finish and tight dimensional control matter, the material properties of this insert reduce the need for secondary polishing and minimise rejects. Stable chip control reduces downtime and improves process reliability Equipped with the FP2 chipbreaker, this insert promotes controlled chip formation across a range of feeds appropriate for finishing and light machining. Predictable chips mean fewer interruptions from tangled swarf and reduced risk to the toolholder, which in turn supports higher effective spindle time and improved process security. The chipbreaker is engineered to assist in evacuating chips safely at typical finishing parameters, making the tool a suitable choice for manufacturers seeking reliable cycle times and less manual intervention. Geometry and edge design balance strength and accessibility The rhombic 80° geometry offers a compromise between accessibility and edge strength, enabling profile-following and general turning tasks with a single insert family. The 0.8 mm corner radius combined with a 7° relief angle supports fine surface generation while retaining an edge capable of short, interrupted cuts. The nominal plate thickness T3 adds rigidity in the pocket, helping to maintain dimensional stability during light-roughing transitions. Together, these design elements deliver a versatile insert that can be used for finishing passes where both accuracy and surface integrity are required. Practical selection and integration into production cells Tolerance class G and the Walter Cermet series designation indicate a manufacturing standard aligned with industrial needs; for precise process planning, check the product matrix to verify workpiece compatibility and recommended cutting data. The insert is supplied in the CCGT09T308M-FP2 geometry and is compatible with standard tooling systems that accept rhombic 80° turning inserts of size 09. For best results, pair with appropriate toolholders and adhere to recommended feeds and speeds for cermet grades to unlock the full potential of the grade in finishing tasks. For precise finishing tasks with Walter Tools' WEP10C cermet grade, contact Metav Werkzeuge for tailored recommendations and to confirm suitability for specific materials; eMail: info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: CCGT09T308M-FP2-WEP10C-WALTER Designation: CCGT09T308M-FP2 WEP10C Series: Walter Cermet Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Plate thickness: T3 Tolerance class: G Geometry: Rhombic 80° Chipbreaker: FP2 Features Material: catalogue dependent Grade: WEP10C (cermet) Execution: T Plate form: Rhombus 80° Series information: Walter Cermet Note: Verify workpiece suitability in the product matrix FAQ What materials is this insert suited to machine? The CCGT09T308M-FP2 WEP10C is a cermet-grade insert; material suitability should be checked against the Walter Cermet product matrix to confirm recommendations for specific alloys and hardness levels. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker on the insert promotes controlled chip formation and evacuation, reducing the risk of chip-related interruptions and supporting consistent finishing results with the Walter Tools insert. Is this insert suitable for finishing operations? Yes, the geometry and the WEP10C cermet grade are optimised for finishing and light-roughing, offering a balance of edge life and surface quality for demanding finish passes. What does the rhombic 80° geometry provide in practice? The rhombic 80° shape enables access to a variety of turning positions while maintaining sufficient edge strength for short interruptions, making it a versatile option within the Walter Cermet series. Where can one obtain cutting data or application advice for this insert? For cutting data and specific application advice for the CCGT09T308M-FP2 WEP10C, consult Metav Werkzeuge or refer to the Walter Cermet documentation and product matrix for recommended parameters. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT09T308ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the WEP01C cermet grade and the FX4 chipbreaker to maintain stable edge life and consistent surface quality, while the Rhombic 80° geometry and 0.8 mm corner radius support versatile turning tasks; order directly via Metav Werkzeuge or consult the team for cutting data and grade selection. CCGT09T308ML-FX4 WEP01C turning insert — Walter Tools (7° relief, Rhombic 80°) A CCGT09T308ML-FX4 WEP01C turning insert designed for productive medium-to-fine turning with a cermet grade tuned for stable wear performance Walter Cermet cermet grade WEP01C FX4 chipbreaker for controlled chips Rhombic 80° shape for versatile turning 0.8 mm corner radius and 7° relief angle Consistent tool life that supports steady production The WEP01C grade, part of the Walter Cermet series, is a cermet-based cutting material developed for a balance between wear resistance and edge stability; this translates into longer cutting intervals and fewer insert changes in batch production. Cermet inserts combine ceramic hardness with metallic toughness, which improves abrasive wear resistance and helps to maintain a sharp cutting edge for a predictable number of parts. For operations where reproducible surface finish and reduced tool management matter, the grade’s behaviour reduces process variation and supports cost-effective machining over time. Predictable chip formation for safer, cleaner turning cycles The integrated FX4 chipbreaker is configured to produce short, controllable chips during turning, reducing the risk of entangling long swarf and improving thermal dissipation at the cutting edge. Controlled chip flow benefits cycle reliability and simplifies downstream handling, while the insert’s geometry supports improved contact conditions that can enhance surface quality. By combining a dedicated chipformer with the cermet cutting material, this insert aims to deliver stable cutting forces and consistent machining results across repeated operations. Geometry and tolerance for adaptable machining and accurate results The Rhombic 80° insert form with a 0.8 mm corner radius and 7° relief angle gives a compromise between strength and access: the acute approach angle aids profiling and external turning, while the corner radius provides a defined edge for finishing passes. The T3 thickness and tolerance class G indicate a robust plate suited for standard toolholders with precise seating; the size code 09 fits typical tool pocket dimensions. This geometry supports both moderate-depth roughing and finishing with reduced vibration, enabling reliable performance across a range of turning tasks. Discuss grade selection and cutting data with Metav Werkzeuge to match the Walter Tools insert to specific workpiece materials and cycle requirements — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CCGT09T308ML-FX4-WEP01C-WALTER Designation: CCGT09T308ML-FX4 WEP01C Product type: Turning insert Series: Walter Cermet Grade: WEP01C Facts Relief angle: 7° Corner radius: 0.8 mm Insert shape: Rhombic 80° Size: 09 Thickness: T3 Tolerance class: G Special features Chipbreaker: FX4 Execution: T Material information: Catalogue dependent Sort and series note: WEP01C is a Walter cermet cutting grade; check product matrix for material suitability FAQ What materials is this insert suitable for? The insert is a WEP01C cermet grade from Walter Tools; suitability depends on the specific workpiece material and should be verified against the product matrix for the CCGT09T308ML-FX4 variant. How does the FX4 chipbreaker affect machining? The FX4 chipbreaker on the CCGT09T308ML-FX4 promotes short, controllable chips for safer handling and improved surface consistency during turning operations. Is the Rhombic 80° form appropriate for finishing passes? Yes, the Rhombic 80° geometry combined with a 0.8 mm corner radius makes the insert appropriate for finishing and light profiling, providing a defined edge for a stable surface finish. What does the T3 thickness and tolerance class G imply for tool mounting? T3 thickness and tolerance class G indicate standardised plate dimensions and accurate seating for consistent clamping in compatible toolholders, aiding repeatable positioning and machining accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory-new product of Walter Tools.
CCGT09T308MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the combination of high‑precision Cermet grade, consistent chip control thanks to the FX4 chipbreaker, and a compact Rhombus 80° geometry for reliable finishing; order the insert directly via Metav Werkzeuge or request consultation from our specialists. CCGT09T308MR-FX4 WEP01C – Turning insert, Walter Tools (Cermet grade, FX4 chipbreaker) The CCGT09T308MR-FX4 WEP01C is a precision cermet turning insert designed for fine finishing and controlled chip formation in general turning applications. High-precision Cermet grade WEP01C FX4 chipbreaker for controlled chips Rhombus 80° geometry for versatility 0.8 mm corner radius for fine finishing Optimised finishing with predictable chip behaviour The CCGT09T308MR-FX4 WEP01C is engineered for stable chip formation and consistent surface results. The WEP01C cermet composition combines wear resistance with a fine cutting edge, which supports extended tool life in finishing operations. The integrated FX4 chipbreaker is tuned to break and evacuate chips cleanly, reducing secondary operations and downtime while maintaining a steady feed and speed window for efficient cycle times. Geometry that delivers precision and flexibility A compact Rhombus 80° geometry and a 0.8 mm corner radius provide a balance between strength and the capacity for fine detail. The insert’s 7° clearance and tolerance class G ensure accurate seating and repeatability in toolholders, while the T3 plate thickness supports stable cutting with reduced vibration. These characteristics make the insert suitable for tasks where surface quality and dimensional accuracy are priorities, especially in light finishing and semi-finish turning. Process security and productivity in production Belonging to the Walter Cermet series, this indexable insert emphasises process reliability and predictable wear behaviour. The combination of a hard cermet grade and a well‑designed chipbreaker contributes to higher productivity through fewer tool changes and uniform part quality. In production environments where consistent output and low scrap rates are essential, the insert’s edge stability and repeatable performance support lean machining routines and cost‑efficient cycles. Material compatibility and selection guidance Material suitability should be verified against the manufacturer’s product matrix before use; the cutting grade and series suggest strengths in fine finishing, but exact performance varies with workpiece material and cutting conditions. For selection, pairing the insert with an appropriate toolholder and optimised cutting data will maximise surface integrity and tool life. For further guidance on applications or recommended parameters, technical consultation is available to match the insert to specific machining tasks. For tailored advice on Walter Tools’ cermet inserts and support in selecting the right specification for a given application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CCGT09T308MR-FX4-WEP01C-WALTER Designation: CCGT09T308MR-FX4 WEP01C Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Walter Cermet Core measurements Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Plate thickness: T3 Shape: Rhombus 80° Tolerance class: G Coating / Material / Features Grade: WEP01C (Cermet) Chipbreaker: FX4 Execution: T Material designation: Katalogabhängig ISO designation: CCGT09T308MR-FX4 WEP01C FAQ What is the primary advantage of the cermet grade used here? The cermet grade WEP01C offers improved edge wear resistance and a fine cutting edge, enabling better surface finishes and longer life in finishing cuts with the CCGT09T308MR-FX4 WEP01C insert. Which applications suit this insert best? The insert is intended for fine finishing and controlled chip removal in general turning; its Rhombus 80° geometry and FX4 chipbreaker favour stable finishing operations for parts requiring quality surface integrity. How does the FX4 chipbreaker affect machining? The FX4 chipbreaker on the CCGT09T308MR-FX4 WEP01C helps to form short, controllable chips and supports consistent evacuation, reducing the need for secondary chip handling measures. Is the insert ready for heavy roughing? This indexable plate is optimised for finishing and semi-finishing; heavy roughing performance depends on the specific workpiece material and cutting data, so validation against the product matrix is recommended. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
CCGT120402-MN2 WN10 WN10 Wendeplatten - Walter Tools
Benefit from a robust combination of stable chip control, versatile Rhombic 80° geometry and the economical, uncoated WN10 carbide grade that keeps production reliable; order the insert directly via Metav Werkzeuge or consult our team for application advice. CCGT120402-MN2 WN10 – Indexable insert for boring and turning, Rhombic 80° (MN2) by Walter Tools A precision CCGT120402-MN2 WN10 indexable insert designed for boring, counterboring and light turning tasks, offering consistent chip formation and adaptable cutting engagement. Rhombic 80° shape for versatile engagement Uncoated carbide grade WN10 for general use MN2 chipbreaker for controlled chip formation 7° clearance for stable cutting geometry Greater throughput from a reliable uncoated grade This indexable insert combines the cost advantages of an uncoated carbide grade with a design aimed at continuous production. The declared WN10 grade is an economical hardmetal variant suitable for a broad range of workshop tasks; in practice this means longer tool life in many general machining operations and fewer insert changes. The insert’s construction supports repeatable performance and helps to lower process interruptions, contributing to a smoother production flow and measurable efficiency gains on the shop floor. Geometry engineered for predictable chips and surface quality The Rhombic 80° geometry paired with the MN2 chipbreaker produces short, controlled chips and predictable cutting forces. A 7° relief angle helps to reduce rubbing and thermal build-up at the cutting edge, while the 0.2 mm corner radius supports edge strength and gradual wear. For machinists unfamiliar with chipbreaker design: the MN2 form directs chips away from the cutting zone, reducing the risk of entanglement and improving surface finish on both bore walls and turned faces. Simple integration and dimensional consistency Tolerance class G and the standardised plate designation make integration into common toolholders straightforward. Plate size 12 and the specified thickness code ensure compatibility with holders designed for CCGT-style inserts; material designation is catalogue-dependent, so substrate choices can be confirmed against the supplier matrix. The insert is supplied in execution T and the open series description indicates an uncoated hardmetal suitable for flexible workshop use. These attributes support predictable assembly and repeatable machining setups across different machines. Contact Metav Werkzeuge for tailored advice on using the WN10 insert or to request a supply quotation from Metav Werkzeuge; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: CCGT120402-MN2-WN10-WALTER Designation: CCGT120402-MN2 WN10 Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Manufacturer: Walter Tools Core data Plate size: 12 Relief angle: 7° Corner radius: 0.2 Plate thickness: 04 Tolerance class: G Design & features Rhombic 80° plate form MN2 chipbreaker WN10 uncoated hardmetal grade Execution: T Material: Katalogabhängig Application: boring, counterboring, light turning Series description: uncoated carbide, check product matrix for suitable materials FAQ What materials is this insert suitable for? The CCGT120402-MN2 WN10 insert is an uncoated hardmetal grade; suitability depends on the specific workpiece material—refer to the product matrix to confirm compatibility with different steels and non-ferrous metals. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes controlled chip formation, which improves surface finish and reduces chip-related interruptions when using the rhombic geometry in boring and turning operations. Is the insert compatible with standard CCGT toolholders? Yes, the plate form and size correspond to common CCGT-style holders; verify the holder’s insert seat dimensions against the designation CCGT120402-MN2 before fitting. What does tolerance class G mean for repeatability? Tolerance class G indicates consistent manufacturing tolerances that support repeatable seating and cutting accuracy across multiple inserts, aiding stable process control. Can the corner radius be changed for different finishes? The supplied corner radius is 0.2 mm; for different surface finish or strength requirements, select alternative radii if available in the product family or consult Metav Werkzeuge for options. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand Walter Tools) is part of the global Sandvik Group and is a leading manufacturer of precision metalworking tools. Protected trademarks and trade names are the property of their respective owners. Mention of brand names and trademarks is for explanatory purposes only and does not indicate any affiliation with Metav Werkzeuge.
CCGT120402-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
The combination of the WNN10 coated carbide and the MN2 chipbreaker delivers stable chip formation and consistent edge life, supporting productive turning cycles. Benefit from the rhombic 80° geometry with a 0.2 mm corner radius and 7° clearance for reliable surface finish and repeatable component tolerances. Order or consult Metav Werkzeuge for integration advice and application-specific recommendations. CCGT120402-MN2 WNN10 Rhombic 80° indexable insert, MN2 chipbreaker — Walter Tools A robust CCGT120402-MN2 WNN10 indexable insert for turning and boring, designed to combine controlled chip control with a coated cemented carbide grade for versatile machining tasks. Coated carbide grade WNN10 for diverse materials MN2 chipbreaker for controlled chip formation Rhombic 80° shape with 0.2 mm corner radius Positive 7° clearance angle for reliable cutting Stable chip control for uninterrupted machining The integrated MN2 chipbreaker is tailored to produce short, controllable chips that reduce the risk of entanglement and machine stops. This controlled chip formation translates into fewer process interruptions and a smoother production flow, which is particularly advantageous on serial turning operations. With predictable chip shapes, tool handling becomes safer and cycle times can be optimised without sacrificing component integrity. Repeatable edge life and improved surface quality The WNN10 coated carbide substrate provides a balanced wear resistance and surface finish performance when used within its recommended application matrix. Combined with the rhombic 80° geometry and the 0.2 mm corner radius, the insert sustains a stable cutting edge that helps achieve consistent dimensional accuracy and fine surface texture. The 7° clearance supports a positive cutting action that minimises rubbing and improves heat evacuation at the tool–workpiece interface. Simple integration and versatile insert handling As an indexable insert, the CCGT120402-MN2 form allows quick replacement and secure clamping in standard toolholders, reducing set-up time and downtime. The format and thickness code support compatibility with established holder ranges; check the product matrix to confirm suitability for specific machines and materials. For application advice or product-matrix verification, Metav Werkzeuge provides technical consultation by e‑mail or phone to ensure the insert matches the intended machining task. Contact Metav Werkzeuge for personalised machining advice and to request the Walter Tools CCGT120402-MN2 WNN10 insert for stable, productive turning Technical data SKU: CCGT120402-MN2-WNN10-WALTER Designation: CCGT120402-MN2 WNN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Measurements / core data Free angle: 7° Corner radius: 0.2 mm Insert size: 12 Thickness code: 04 Tolerance class: G Design / special features Coating / grade: WNN10 (coated cemented carbide) Chipbreaker: MN2 Plate shape: Rhombus 80° Series: Walter Schneidstoffsorte - Serie offen Execution: T Material designation: Katalogabhängig Note: Sorteneinsatz / Bedeutung – check product matrix for specific workpiece suitability FAQ What materials is this insert suitable for? The CCGT120402-MN2 WNN10 is a coated cemented carbide grade; suitability depends on the specific workpiece material and should be checked against the product matrix for the WNN10 grade and the intended application. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes controlled, short chips, improving evacuation and reducing the likelihood of chip-related interruptions in turning operations with the CCGT120402-MN2 WNN10 insert. What benefit does the rhombic 80° geometry provide? The rhombic 80° form offers a balanced combination of cutting edge strength and access to shoulders, supporting stable cutting and good surface finish when used with the recommended edge radius and clearance. How should the corner radius be selected for my part tolerance? The 0.2 mm corner radius on this insert helps to balance edge strength and dimensional control; choose the radius based on the required surface finish and tolerance, and verify with the process engineers or Metav Werkzeuge if unsure. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. There is no connection between our company and the brands mentioned. The offered item is original new goods from the manufacturer.
CCGT120404-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and stable chip formation for efficient machining of demanding alloys; the coated carbide grade ensures consistent edge life and surface quality. Order the CCGT120404-FM2 WSM20S inserts through Metav Werkzeuge or consult our specialists for application-specific recommendations. Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT120404-FM2 WSM20S for rostfreier Stahl and superalloys – Walter Tools CCGT120404-FM2 WSM20S is a coated carbide indexable insert designed for tough-to-machine materials, offering a Tiger·tec Silver coating and FM2 chipbreaker geometry for stable cutting performance Coated carbide Tiger·tec Silver technology FM2 chipbreaker for secure chip control Optimised for rostfreier Stahl and superalloys Rhombus 80° with 0.4 mm nose radius Reliable machining of challenging alloys with consistent edge life The Walter Tools insert in the Tiger·tec Silver range combines a coated carbide construction with a specifically tuned chipbreaker to secure predictable cutting behaviour when machining rostfreier Stahl and heat-resistant superalloys. The coating improves thermal resistance and reduces adhesion at the cutting edge, which translates into longer tool life and fewer interruptions for tool change. For production-focused environments, this results in higher uptime and lower tool consumption per part, supporting an efficient and economical process. Precision geometry that supports repeatable surface quality The rhombic 80° insert geometry with a 0.4 mm nose radius delivers a balance between edge strength and surface finish. A small nose radius helps achieve tighter dimensional control on bore and counterbore operations, while the 80° shape improves access in restricted features. The FM2 chipformer is optimised for medium to heavy cutting conditions, ensuring a controlled chip flow that reduces the risk of built-up edge and protects the cutting edge. This geometry is particularly advantageous where consistent surface integrity and repeatable results are required. Practical advantages for workshop and production planning The insert’s specification supports common industry machining strategies: durability under elevated temperature, reliable chip control and compatibility with typical cutter bodies for drilling and turning operations. As the grade is specified for the material groups S and M according to ISO 513, it is suitable where heat-resistant superalloys and rostfreier Stahl are present. This reduces the need for multiple special grades and simplifies inventory. The result is straightforward tool selection, fewer changeovers and a more predictable machining cycle time. How the coated grade helps in day-to-day operations Tiger·tec Silver coating technology increases resistance to thermal softening and edge wear; this means fewer interventions and a lower risk of unexpected rejects. The FM2 chipbreaker supports safer chip evacuation, which is particularly useful in deep-hole and shoulder operations where chip control is critical. These features combine to enhance process stability and contribute to measurable productivity gains in serial production. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and for order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CCGT120404-FM2-WSM20S-WALTER SKU: CCGT120404-FM2-WSM20S-WALTER Designation: CCGT120404-FM2 WSM20S Facts Insert size: 12 mm Thickness: 0.4 mm Nose radius: 0.4 mm Clearance angle: 7° Tolerance class: G Special features Series: Tiger·tec Silver Chipbreaker: FM2 Geometry: Rhombus 80° Grade: WSM20S (coated carbide) Material suitability: rostfreier Stahl, heat-resistant superalloys (S, M) Execution: T Manufacturer brand: Walter Tools FAQ What materials are suitable for this insert? The CCGT120404-FM2 WSM20S insert is designed primarily for rostfreier Stahl and heat-resistant superalloys (material groups M and S), offering thermal resilience and chip control for those alloys. How does the Tiger·tec Silver coating influence tool life? The Tiger·tec Silver coating improves thermal stability and reduces adhesion at the cutting edge, which increases edge life and helps maintain consistent performance under elevated temperatures. Which chipbreaker should be expected on this insert and what is its function? This insert features the FM2 chipbreaker, which is engineered to produce controlled chips and reduce the risk of built-up edge, aiding in safer chip evacuation during deeper or interrupted cuts. Is the insert suitable for both drilling and turning applications? Yes, the insert form and designation match applications for both drilling/reaming operations and certain turning or boring tasks when mounted in the appropriate tool holders designed for rhombic 80° inserts. How does the 0.4 mm nose radius affect surface finish and edge strength? A 0.4 mm nose radius provides a compromise between improved surface finish and sufficient edge strength, enabling accurate dimensional control while keeping the cutting edge robust under varying cutting forces. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools is referenced as the product brand.
CCGT120404-FN2 WN10 Wendeplatten - Walter Tools
Combining uncoated carbide construction with a 0.4 mm corner radius and a dedicated FN2 chipbreaker, this insert offers predictable chip control and consistent edge life for finishing operations; order the CCGT120404-FN2 WN10 through Metav Werkzeuge or contact the technical advisers for application-specific guidance. CCGT120404-FN2 WN10 – Turning insert, Rhombic 80°, FN2 chipbreaker by Walter Tools The CCGT120404-FN2 WN10 is a Rhombic 80° indexable insert with an FN2 chipbreaker, designed for controlled finishing cuts and reliable toolroom performance. Rhombic 80° geometry for stable cuts 0.4 mm corner radius for accurate contours FN2 chipbreaker for predictable chip control Uncoated carbide for reliable edge life Predictable edge life through a resistant grade The uncoated WN10 grade is a classic cemented carbide that delivers consistent wear behaviour, which reduces variability in tool life and supports steady production cycles. Combined with the 0.4 mm corner radius, the geometry helps maintain dimensional accuracy on fillets and small radii, lowering the need for rework. The tolerance class G gives a clear indicator of manufacturing precision, assisting planners in assuring interchangeability and repeatable set-ups on indexable toolholders. Stable cutting and better surface quality with optimised chip control The FN2 chipbreaker is engineered to produce short, consistent chips at finishing feeds, improving swarf evacuation and minimising the risk of chip re-cutting. Paired with the Rhombic 80° shape, the insert provides good cutting-edge support and access to contoured profiles, while the 7° clearance angle reduces flank rubbing for improved surface finish. These features translate into fewer rejected parts and a smoother downstream process for machining centres and toolrooms. Practical integration and selection for workshop use As a standard CCGT-style insert, it fits compatible indexable turning toolholders and is suitable for inclusion in mixed-stock inventories where predictability is required. The specification—size 12 mm, thickness 4 mm, and the FN2 chipbreaker—supports tool planners in matching cutting data to existing machine capabilities. Material suitability should be verified against the manufacturer’s product matrix; for tailored recommendations and cutting-parameter data, Metav Werkzeuge’s consultants can assist in selecting the optimal grade and geometry for specific applications. Contact Metav Werkzeuge today for application recommendations and to secure the CCGT120404-FN2 WN10 insert for your next finishing operation Technical Data Article number: CCGT120404-FN2-WN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT120404-FN2 WN10 Walter Tools Designation: CCGT120404-FN2 WN10 Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 Execution: T Facts Inscribed circle / size: 12 mm Thickness: 4 mm Corner radius: 0.4 mm Clearance angle: 7° Tolerance class: G Special features Chipbreaker: FN2 Insert shape: Rhombus 80° Coating / surface: uncoated cemented carbide (WN10) Material information: Katalogabhängig Application note: Check product matrix for workpiece suitability FAQ What materials is this insert suited for? Material suitability must be checked in the manufacturer's product matrix; the WN10 grade is an uncoated cemented carbide and is intended for general finishing tasks as specified by Walter Tools. Does the insert fit standard toolholders? Yes, the CCGT120404-FN2 WN10 conforms to the CCGT indexable insert family and is compatible with standard holders designed for CCGT inserts. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker produces short, controlled chips at finishing feeds, improving chip evacuation and contributing to a consistent surface finish and safer swarf handling. What dimensional data should be noted when specifying holders? Key dimensions: inscribed circle 12 mm, thickness 4 mm, corner radius 0.4 mm, Rhombic 80° shape and tolerance class G. Is the grade coated or uncoated? The WN10 designation indicates an uncoated cemented carbide grade; verify specific coating or substrate details in the catalogue entry if required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the brands named. The offered article is an original, factory-new product of Walter Tools.
CCGT120404-FN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WNN10, a rhombic 80° geometry and the FN2 chipbreaker for reliable machining and consistent edge life; order directly via Metav Werkzeuge or consult our specialists for material-specific selection. CCGT120404-FN2 WNN10 turning insert — rhombic 80° geometry, FN2 chipbreaker (Walter Tools) CCGT120404-FN2 WNN10 is a coated carbide turning insert designed for general turning applications where predictable chip control and edge stability are required Coated carbide grade WNN10 Rhombic 80° insert geometry 0.4 mm corner radius FN2 chipbreaker for chip control Consistent cutting performance through proven grade and geometry The combination of a coated carbide substrate and the WNN10 grade targets shops that value predictable tool life and consistent machining results. The open series designation indicates a versatile, widely applicable grade; when paired with the rhombic 80° geometry, this configuration provides a stable cutting edge for a variety of turning operations. The description emphasises measurable process benefits: improved edge stability and stable chip formation, which together reduce unplanned tool changes and contribute to steadier cycle times. Cost-efficiency delivered by design and chip control The FN2 chipbreaker and the compact 0.4 mm corner radius reduce burr formation and help to maintain surface quality without excessive tool intervention. Less rework and fewer insert replacements translate into a lower cost per part in serial production. The coated carbide construction offers wear resistance for many everyday turning tasks; for materials outside the standard matrix, the product matrix should be consulted to ensure optimum economy and productivity. The result is a practical balance between productivity and predictable maintenance intervals. Practical selection and integration for production workflows Integration into existing toolholders is straightforward thanks to the standardised dimensions and the clear ISO designation. The insert is identified by a standardised code that makes ordering and inventorying simple; compatibility with common clamping systems supports rapid replacement during scheduled tool exchanges. For specific material applications and cutting parameters, Metav Werkzeuge’s advisory service can assist in assigning the correct speeds and feeds based on the WNN10 performance characteristics, ensuring the insert performs as intended in the production environment. Contact Metav Werkzeuge for tailored application advice on the Walter Tools WNN10 insert and support with selection and procurement: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: CCGT120404-FN2-WNN10-WALTER Designation: CCGT120404-FN2 WNN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WNN10 Execution: T Tolerance class: G Core measurements Clearance angle: 7° Corner radius: 0.4 mm Insert size: 12 mm Thickness: 0.4 mm Features & materials Insert form: Rhombus 80° Chipbreaker: FN2 Coating / substrate: coated carbide Material specification: catalogue-dependent Note: check product matrix for material suitability FAQ What applications suit this coated carbide insert best? The CCGT120404-FN2 WNN10 insert from Walter Tools is suitable for general turning applications where stable chip formation and predictable tool life are priorities; material-specific suitability should be verified against the product matrix. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker provides controlled chip segmentation and evacuation, which supports consistent surface finish and reduces interruptions due to poor chip control when using the CCGT120404-FN2 WNN10 insert. Can this insert be used for finishing operations? With its 0.4 mm corner radius and rhombic 80° geometry, the insert can achieve good surface quality in many finishing contexts; cutting parameters must be adjusted to the specific material and machine setup. Is the WNN10 grade coated for wear resistance? Yes, WNN10 is a coated carbide grade; its coating and substrate combination aim to provide wear resistance and stable edge life under typical turning conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The article offered is an original, factory-new product from the manufacturer.
CCGT120404-MN2 WN10 MN2 Wendeplatten - Walter Tools
Benefit from a combination of precise geometry, reliable chip control and simple tool designation for consistent turning and drilling processes; the uncoated WN10 carbide grade and MN2 chipbreaker support productive operations. Order the CCGT120404-MN2 WN10 directly via Metav Werkzeuge or ask the consultants if needed. CCGT120404-MN2 WN10 indexable insert — Rhombus 80°, 0.4 mm corner radius, Walter Tools CCGT120404-MN2 WN10 is an indexable insert designed for combined drilling/reaming and turning applications in general machining environments Rhombus 80° geometry 0.4 mm corner radius MN2 chipbreaker Uncoated carbide WN10 Higher productivity through targeted geometry and chip control The insert’s Rhombus 80° geometry and MN2 chipbreaker are designed to deliver stable cut behaviour and reproducible chip formation in many common operations. The moderately rounded 0.4 mm corner radius reduces edge stress while maintaining dimensional control, which helps to prolong tool life under intermittent or interrupted cuts. The 7° clearance ensures consistent engagement with the workpiece and reduces rubbing at the flank, improving surface finish and process stability. These geometry features together support a rational production argument: fewer insert changes and stable machining parameters translate into measurable workflow gains. Practical integration and handling for workshop routines Marked with the standard ISO-style designation, the insert allows straightforward identification and machine setup. The compact 12 mm plate size and thin section support tight-tooling envelopes and give freedom in fixture design. As an uncoated carbide grade, WN10 is intended for economical use where coating is not required; the open series classification prompts a materials check via the manufacturer’s product matrix before application. For customers seeking process certainty, the clear ISO-style code and the simple chipbreaker geometry make tool selection and replacement efficient, reducing machine downtime and simplifying inventory management. Application guidance and suitability checks Material suitability must be verified against the product matrix: the series information notes that WN10 is an uncoated carbide family and that specific workpiece materials and cutting data should be checked prior to production use. The insert is provided in execution code T with tolerance class G, which is relevant for precision fits in holder systems. For advice on cutting data, clamping solutions or compatibility with a specific machine, contact Metav Werkzeuge; specification support is available for defining cutting speeds, feeds and depth of cut for the intended application. The emphasis is on informed decision-making: selecting the right insert geometry and grade for the job reduces scrap, increases first-pass yield and supports repeatable processes. Contact Metav Werkzeuge for technical specification support and to source genuine Walter Tools CCGT120404-MN2 WN10 indexable inserts Technical data Article number: CCGT120404-MN2-WN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT120404-MN2 WN10 Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 12 mm Thickness code: 04 Special features Chipbreaker: MN2 Grade: WN10 (uncoated carbide) Plate form: Rhombus 80° Execution: T Series: Walter Schneidstoffsorte - Serie offen Tolerance class: G FAQ What primary operations is this insert intended for? The CCGT120404-MN2 WN10 insert is intended for combined drilling/reaming and turning tasks where a Rhombus 80° geometry and MN2 chip control are advantageous. Is the WN10 grade coated or uncoated? The WN10 grade supplied with this insert is an uncoated carbide; users should consult the product matrix for specific material compatibility. What does the MN2 chipbreaker deliver in practice? The MN2 chipbreaker promotes stable chip formation and manageable chips in routine finishing and semi-finishing cuts, supporting consistent surface quality. How should the corner radius and clearance be interpreted for setup? The 0.4 mm corner radius balances edge strength and dimensional accuracy, while the 7° clearance helps prevent flank rubbing; both influence recommended feed and depth-of-cut settings. How can compatibility with tool holders be ensured? Use the ISO-style designation and the listed plate form (Rhombus 80°) to match the insert with compatible holders and clamping systems; the tolerance class G is relevant for precision fit. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) is among the leading manufacturers of precision metal‑cutting tools globally and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used here for explanatory purposes only. It concerns original, factory‑new goods from the manufacturer.
CCGT120404-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Reliable productivity and predictable chip control are achieved through the combination of a Rhombic 80° geometry and an MN2 chipbreaker, together with the WNN10 coated carbide grade for consistent wear resistance; order the inserts via Metav Werkzeuge or consult our advisors for application-specific recommendations. CCGT120404-MN2 WNN10 — Indexable turning and boring insert, Rhombic 80° with MN2 chipbreaker (Walter Tools) The CCGT120404-MN2 WNN10 is an indexable insert for turning and boring operations, designed to deliver stable chip formation and productive machining with a coated carbide grade. Rhombic 80° cutting geometry MN2 chipbreaker for consistent chips 7° relief angle for secure cutting Coated carbide grade WNN10 for durability Predictable chip control from geometry and chipbreaker The rhombic 80° geometry combined with the MN2 chipbreaker offers dependable chip formation and evacuation, which reduces interruptions and increases machining time between interventions. The geometry concentrates cutting forces where the insert is strongest, while the chipbreaker shapes and breaks chips to prevent long, tangled swarf. This results in a measurable increase in process stability and more consistent cycle times when compared with plain-edge inserts. The design is particularly advantageous in repetitive production environments where repeatability and minimal downtime are priorities. Coated carbide grade for consistent edge life The insert uses the Walter grade WNN10, a coated carbide class that provides balanced wear resistance and toughness. The coating enhances the cutting edge’s resistance to abrasion and adhesion, extending usable life under a range of operating conditions. As the grade is part of Walter’s open series, compatibility with specific workpiece materials should be verified against the product matrix; this ensures the chosen grade aligns with the intended substrate and machining strategy. The practical outcome is fewer tool changes and a more predictable tool-cost profile across production runs. Dimensional features that aid setup and surface quality Key dimensional data such as the 0.4 mm corner radius, 7° relief angle and the rhombic plate form support reliable seating in toolholders and predictable surface finishes. The plate size (12) and thickness (04) are designed for standard toolholder families, and the tolerance class G indicates consistent manufacturing precision for repeatable positioning. A modest corner radius helps to achieve a fine surface on finishing passes while still offering sufficient edge strength for light roughing. Together, these details reduce setup iterations and help maintain consistent part quality across batches. For tailored grade selection and prompt supply of Walter Tools inserts such as the CCGT120404-MN2 WNN10, contact Metav Werkzeuge for application advice and ordering assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCGT120404-MN2-WNN10-WALTER Article designation: CCGT120404-MN2 WNN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WNN10 Execution: T Numbers / Core technical data Plate size: 12 Thickness: 04 Corner radius: 0.4 Relief angle: 7° Tolerance class: G Designs / Special features Rhombus 80° plate form MN2 chipbreaker Coated carbide (WNN10) Stable edge preparation Material specification: Katalogabhängig FAQ What machining tasks is this insert intended for? The insert is intended for turning and boring applications where a rhombic 80° geometry and the MN2 chipbreaker support controlled chip formation and efficient material removal. Which grade does the insert use and what are its benefits? The insert is made in the WNN10 coated carbide grade; this provides a balance between wear resistance and toughness for consistent edge life in many production scenarios. How does the MN2 chipbreaker improve process stability? The MN2 chipbreaker shapes and breaks chips to reduce long swarf formation, which minimises stoppages and supports continuous production with predictable cycle times. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com The Walter AG (brand: Walter Tools) is a global manufacturer of precision cutting tools and forms part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned here for explanatory purposes only. The offered item is an original, factory-new product from the manufacturer.
CCGT120408-FM2 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the FM2 chipbreaker to secure reliable edge life and consistent swarf control for demanding turning or boring operations; order directly via Metav Werkzeuge or consult our specialists for application support. CCGT120408-FM2 WSM20S indexable turning/boring insert — Tiger·tec Silver, for rostfreier Stahl and hard-to-machine alloys (Walter Tools) A CCGT120408-FM2 WSM20S insert designed for heavy-duty turning and boring in rostfreier Stahl and heat-resistant alloys, providing robust edge stability and predictable chip formation Tiger·tec Silver coated carbide Optimised FM2 chip geometry Rhombic 80° form, 0.8 mm nose radius 7° relief angle for stable cutting Durable coating for extended tool life and process consistency The WSM20S grade from the Tiger·tec Silver family is a coated carbide formulation engineered for applications in rostfreier Stahl and high-temperature alloys. The multilayer coating increases resistance to abrasive and adhesive wear while maintaining flank and crater integrity under elevated cutting temperatures. This results in longer intervals between index changes and fewer unscheduled tool swaps, which supports continuous production and lowers unit costs per component. The combination of coating and carbide substrate emphasises performance over one-off speed gains, favouring predictable tool life in challenging materials. Geometry that secures surface finish and swarf control The insert’s Rhombic 80° shape paired with the FM2 chipbreaker provides a controlled breaking pattern and stable cutting forces. A 0.8 mm nose radius balances strength and surface quality for external turning and light profiling, while the 7° relief angle reduces rubbing on the flank face and helps maintain dimensional accuracy. These attributes enable a consistent surface finish and reduce rework rates, making the geometry particularly suitable where component tolerances matter and chip evacuation is critical. Application guidance for reliable machining results When machining rostfreier Stahl or superalloys, select cutting parameters that moderate heat generation and support continuous chip evacuation; the insert’s design assists in achieving that balance. The combination of grade and chipbreaker is beneficial for operations that require steady metal removal rather than aggressive finishing passes. Use the CCGT120408-FM2 WSM20S insert in toolholders compatible with Rhombic 80° inserts and monitor edge condition to extend tool life. For specific cutting data and holder recommendations, Metav Werkzeuge can provide tailored guidance based on workpiece geometry and machine capability. Proven brand technology for consistent shop-floor performance Walter Tools’ Tiger·tec Silver series and the WSM20S grade are developed to deliver stable cutting edges and reliable chip formation across a broad range of demanding materials. The insert’s fit in tolerance class G supports repeatability in serial production, while the clear specification of form and radius simplifies tool planning and inventory management. Choosing a recognised tool system reduces qualification time and helps maintain process security across batches and operators. Contact Metav Werkzeuge for tailored process support and to discuss fitment for the CCGT120408-FM2 WSM20S insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CCGT120408-FM2-WSM20S-WALTER Designation: CCGT120408-FM2 WSM20S Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Facts Relief angle: 7° Corner radius: 0.8 mm Insert form: Rhombic 80° Insert size: 12 Plate thickness code: 04 Chipbreaker: FM2 Tolerance class: G Special features Coated carbide grade Suitable for rostfreier Stahl Suitable for heat-resistant superalloys and titanium (S) Robust edge for heavy-duty turning/boring Execution: T FAQ What materials is this insert suitable for? The CCGT120408-FM2 WSM20S insert is specified for machining rostfreier Stahl and heat-resistant superalloys, where the Tiger·tec Silver coating and FM2 chipbreaker support secure chip formation. How does the FM2 chipbreaker affect machining? The FM2 geometry promotes controlled chip formation and evacuation, which improves process stability and reduces the risk of built-up edge during operations with Walter Tools inserts. What benefits does the Tiger·tec Silver series offer? Tiger·tec Silver provides enhanced wear resistance and thermal stability, helping to extend indexed lives and maintain consistent surface quality in demanding applications. Which nose radius and form are provided and why do they matter? The insert features a 0.8 mm corner radius in a Rhombic 80° form, offering a compromise between strength and finish quality for external turning and light profiling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CCGT120408-FN2 WN10 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, proven WN10 uncoated carbide and a controlled FN2 chipbreaker for consistent production performance; order this insert directly via Metav Werkzeuge or consult the specialists for application-specific guidance. CCGT120408-FN2 WN10 – Indexable Insert (Rhombus 80°, 7° clearance) by Walter Tools The CCGT120408-FN2 WN10 is an indexable insert for drilling, boring and turning applications, designed to deliver stable chip control and reliable edge life in general machining tasks. Rhombic 80° geometry for versatile engagement 7° clearance angle for secure cutting action 0.8 mm corner radius for reliable edge strength FN2 chipbreaker for controlled chip formation Productive cutting with repeatable results The insert delivers predictable cutting performance through its defined geometry and chip control elements. The Rhombus 80° shape combines approach flexibility with a secure seating angle, while the FN2 chipbreaker promotes stable chip formation in a range of operations. Defined cutting geometry reduces vibration and contributes to a more constant tool life, which in turn supports higher process efficiency and less unplanned downtime on the shop floor. Robust edge design for reliable component finish Thanks to the 0.8 mm corner radius and a 7° clearance, the insert provides improved edge strength and reduced edge chipping during interrupted cuts or heavier feeds. This design helps maintain surface quality and dimensional stability in turned and bored features. For production environments seeking predictable tolerances and fewer reworks, the geometry translates directly into mounting confidence and consistent part appearance. Material class and grade: practical guidance for selection The cutting grade is the Walter WN10 uncoated carbide; it is supplied as an open series for catalogue-dependent applications. The grade is presented for versatile use, but suitability must be verified against the specific material matrix for the intended workpiece. For uncertain material matches or hard-to-machine alloys, consult the product matrix or the technical advisors to align grade and cutting data with the process demands. Simple integration and economic machining The insert’s standardised designation and form factor ease integration into existing toolholders and tool systems. Using a dedicated insert such as this one shortens tool-change times and supports systematic stock management. The combination of a stable chipbreaker and a durable uncoated grade helps to balance cutting performance with economical use, making the component a sensible choice where consistent throughput and low handling complexity are priorities. Practical application tips for the workshop When planning operations, consider the insert’s geometry for approach angles and feed selection: the Rhombus 80° lends itself to moderate overhangs and combined operations, while the corner radius will influence achievable surface finish and allowable feed rates. Check the manufacturer’s product matrix for recommended speeds and feeds for specific materials and always secure the insert in a correctly rated clamping pocket to preserve the seating integrity and repeatability. Contact Metav Werkzeuge today for tailored application advice or to request the specific product matrix for this Walter Tools insert; Metav Werkzeuge consultants are available to support process setup and selection. Technical Data Article number: CCGT120408-FN2-WN10-WALTER Article designation: CCGT120408-FN2 WN10 Manufacturer: Walter Tools Product type: Indexable insert (drilling/boring and turning) Facts Free angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 80° Insert size: 12 Thickness code: 04 Tolerance class: G Special features Chipbreaker: FN2 Grade: WN10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ What operations is this insert suitable for? The insert is intended for drilling, boring and turning operations; the CCGT120408-FN2 WN10 combines a Rhombus 80° form and FN2 chipbreaker for versatile machining tasks. Is the WN10 grade coated or uncoated? The WN10 grade is supplied as an uncoated carbide in the Walter open series; verify the grade’s suitability for specific workpiece materials via the product matrix. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker promotes controlled chip formation, reducing entanglement and improving process stability during medium-range cutting conditions. Can this insert be used for stainless or alloyed steels? Material suitability must be checked in the product matrix; the CCGT120408-FN2 WN10 is a versatile grade but confirmation against the intended material is recommended. Which dimensions are critical when selecting a toolholder? Match the insert form (Rhombus 80°), size (12) and thickness code (04) with the toolholder pocket specifications to ensure correct seating and clamping. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and belongs to the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only. The offered item is an original, factory-new product of the manufacturer.
CCGT120408-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide WNN10 grade and a precise FN2 chipbreaker for predictable chip control and consistent surface finish; order the insert directly via Metav Werkzeuge or consult the advisers for selection support. CCGT120408-FN2 WNN10 – Turning insert with FN2 chipbreaker (Walter Tools) A versatile coated-carbide turning and boring insert, CCGT120408-FN2 WNN10, with a rhombic 80° form for adaptable toolpaths and stable cutting performance. Coated carbide WNN10 for stable cutting FN2 chipbreaker for reliable chip control Rhombic 80° form for versatile turning 0.8 mm corner radius for fine finishing Increased process reliability through grade and chip control The combination of the WNN10 coated-carbide specification and the FN2 chipbreaker is engineered to deliver consistent cutting behaviour across a broad range of turning operations. Coated carbide provides a balance between wear resistance and toughness; this reduces flank wear and helps maintain dimensional accuracy over longer tool life. The designated chipbreaker actively manages chip formation, which lowers the risk of built-up edge and interrupted cutting, contributing to stable cycle times and fewer secondary operations. Flexible geometry for accurate finishes and diverse toolpaths A rhombic 80° insert form with a 0.8 mm corner radius and a 7° relief angle offers a compromise between approach angles and strength, enabling both axial and radial cuts with predictable small-step finishing passes. The plate size (12) and thickness (04) support secure clamping in standard toolholders while the modest corner radius aids in achieving fine surface quality without sacrificing edge robustness. These geometric choices make the insert suitable for applications that require controlled material removal and repeatable surface results. Practical selection and integration into production This insert belongs to the Walter tools open series and is specified as a coated carbide type; catalogue-dependent material options may be available. The ISO designation and SKU allow compatibility checks against toolholder inventories and process matrices: use the ISO ID when configuring tool assemblies. If material-specific suitability requires confirmation, the product matrix should be consulted to verify the WNN10 grade for the intended workpiece material. For procurement and quick replacement, Metav Werkzeuge can assist with selection, ensuring the insert fits existing holders and cutting strategies. Request a personalised quote or technical advice from Metav Werkzeuge for Walter Tools' coated-carbide inserts and ensure the right grade and geometry are chosen for the application; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCGT120408-FN2-WNN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT120408-FN2 WNN10 Walter Tools Brand: Walter Tools Designation: CCGT120408-FN2 WNN10 Numbers / Core technical data Plate size: 12 Thickness: 04 Corner radius: 0.8 mm Relief angle: 7° Tolerance class: G Designs / Special features Shape: Rhombus 80° Chipbreaker: FN2 Grade: WNN10 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T Material specification: Katalogabhängig FAQ What materials is this insert suitable for? The suitability of the insert depends on the specific application matrix; the CCGT120408-FN2 WNN10 is a coated-carbide grade intended for a broad range of turning operations, but material compatibility should be checked in the product matrix. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker on this Walter Tools insert promotes consistent chip shape and evacuation, reducing the likelihood of built-up edge and supporting stable cutting conditions during general turning and boring. Which toolholders are compatible with the rhombic 80° form? Standard toolholders designed for rhombic 80° inserts will accept the CCGT120408-FN2 WNN10; verify seat type and clamping dimensions against the ISO designation to ensure secure mounting. What finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius typically produces finer surface finishes than larger radii while maintaining edge strength, making it suitable for finishing passes where dimensional accuracy and surface quality are required. Is this insert part of a larger series with alternative grades? Yes, this item is listed in the Walter open series; alternative grades and catalogue-dependent options are available—consult Metav Werkzeuge or the product matrix for grade selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names belong to their respective owners. Product names and trademarks are used solely for explanation; there is no affiliation between our company and the referenced brands. The item offered is original, factory-new merchandise from the manufacturer.
CCGT120408-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating and the WKK20S grade delivers reliable abrasive-wear resistance and consistent edge life for cast-iron production. The MK4 chipbreaker and a 0.8 mm corner radius provide stable chip formation and robust cutting edges, supporting dependable throughput. Order directly via Metav Werkzeuge or request tailored application advice from our consultants. Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT120408-MK4 WKK20S – for cast iron, Walter Tools The CCGT120408-MK4 WKK20S is a rhombic 80° indexable insert engineered for efficient machining of cast-iron components in production and repair workshops. Optimised for cast iron machining Tiger‑tec Silver coated grade MK4 chipbreaker for stable chips 0.8 mm corner radius for edge strength Higher throughput on abrasive cast-iron jobs The combination of the WKK20S grade and Tiger‑tec Silver coating is tailored to cope with the abrasive nature of cast iron. This means longer useful edge life under cyclic loading and frequent interruptions typical of cast-iron workpieces. The insert’s construction reduces the rate of flank and crater wear, which translates into fewer tool changes and improved machine uptime. For operations where process stability and predictable tool life matter, this insert supports a more economical production rhythm. Controlled chips and secure cutting edge The MK4 chipbreaker is designed for controlled, short chips when machining brittle materials, lowering the risk of chip jamming and improving surface quality. Alongside a 0.8 mm corner radius, the geometry stabilises the cutting edge under intermittent cuts and interrupted surfaces. These features reduce vibration and promote consistent dimensional results, helping to uphold tight tolerances without excessive finishing passes. The result is a reliable balance between material removal rate and component quality. Geometry that supports accuracy and flexibility The rhombic 80° form provides a positive cutting entry and good engagement for a variety of turning operations, while the 7° relief angle facilitates smooth surface generation on uneven cast-iron faces. The insert’s profile and thickness code support secure clamping in standard toolholders and maintain positional accuracy during repeated indexing. Explained simply: the geometry reduces deformation and ensures repeatable tool positioning, which benefits serial production and regrinding schedules. Selection and application guidance for machine shops This insert is intended primarily for machining cast iron; its material designation and chipbreaker are optimised for that group according to ISO classification. When integrating the insert into a process, match cutting data to the machine’s rigidity and the workpiece condition: the coated grade favours moderate to high cutting speeds typical for cast-iron machining. If there is any uncertainty about compatibility with a specific setup, Metav Werkzeuge can advise on cutting parameters and holder selection to achieve the best balance of productivity and tool life. Request tailored application advice or a delivery quote from Metav Werkzeuge for the Walter Tools CCGT120408-MK4 WKK20S insert to optimise cast-iron machining performance Technical data SKU: CCGT120408-MK4-WKK20S-WALTER Designation: CCGT120408-MK4 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Core dimensions Plate size: 12 mm Thickness code: 04 Relief angle: 7° Corner radius: 0.8 mm Special features Grade: WKK20S Chipbreaker: MK4 Shape: Rhombus 80° Tolerance class: G Execution: T Material application: cast iron FAQ What materials is this insert designed to machine? The insert is engineered for machining cast iron; the WKK20S grade and Tiger‑tec Silver coating are matched to the abrasive and breakable-chip behaviour of cast-iron materials. How does the MK4 chipbreaker influence cutting performance? The MK4 chipbreaker promotes short, controlled chips on brittle materials, improving chip evacuation and reducing the chance of chip entanglement during turning operations. What does the 0.8 mm corner radius mean for edge life? A 0.8 mm corner radius increases the strength of the cutting edge, improving resistance to chipping during interrupted cuts and contributing to longer, more predictable tool life. Is this insert compatible with standard toolholders? The insert follows common indexable-insert dimensions (CCGT120408) and can be used in compatible toolholders designed for rhombic 80° inserts; holder selection should ensure correct clamping for the insert thickness code. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods of the manufacturer (Walter Tools).
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com