Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 09T304 WM 4305 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304WM4305-SANDVIK Figures for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4305 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-4305-Sandvik 40END
CCMT 09T304 WM 4315 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for CCMT 09T304 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304WM4315-SANDVIK Data/ Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-4315-Sandvik 40END
CCMT 09T304 WM 4415 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304WM4415-SANDVIK ISO-Code: CCMT09T304 Grade: 4415 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: WM Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-4415-Sandvik 40END
CCMT 09T304 WM 4425 Indexable Insert - Sandvik
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Product specifications insert CCMT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304WM4425-SANDVIK Data/ Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4425 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-09T304-4425-Sandvik 40END
CCMT 09T308 -MF 1205 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Detail specifications CCMT 09T308 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308-MF1205-SANDVIK Facts and Figures: ISO-Code: CCMT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 1205 Chip Breaker: -MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T308-1205-Sandvik 40END
CCMT 09T308 -MM 1205 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Technical data indexable inserts CCMT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308-MM1205-SANDVIK Facts and Figures: ISO-Code: CCMT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1205 Chip Breaker: -MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-09T308-1205-Sandvik 40END
CCMT 09T308 -SMC 1210 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics CCMT 09T308 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308-SMC1210-SANDVIK Facts / Figures: ISO-Code: CCMT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1210 Chip Breaker: -SMC with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-09T308-1210-Sandvik 40END
CCMT 09T308 4325 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications insert CCMT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308PF4325-SANDVIK ISO-Code: CCMT09T308 Grade: 4325 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-09T308-4325-Sandvik 40END
CCMT 09T308 4325 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product characteristics for CCMT 09T308 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308PMC4325-SANDVIK Facts for the tool: ISO-Code: CCMT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-09T308-4325-Sandvik 40END
CCMT 09T308 4325 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts CCMT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308UR4325-SANDVIK ISO-Code: CCMT09T308 Grade: 4325 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-09T308-4325-Sandvik 40END
CCMT 09T308 4325 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product characteristics indexable inserts CCMT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308WF4325-SANDVIK Figures for the tool: ISO-Code: CCMT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-09T308-4325-Sandvik 40END
CCMT 09T308 4325 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts CCMT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308WM4325-SANDVIK Figures for the tool: ISO-Code: CCMT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-09T308-4325-Sandvik 40END
CCMT 09T308 AH120 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH120 carbide grade, a 0.8 mm corner radius and ISO compatibility for consistent, reliable turning results; order the insert via Metav Werkzeuge or contact our consultants for application advice. CCMT09T308 AH120 turning insert by Tungaloy — PVD-coated carbide, 0.8 mm radius CCMT09T308 AH120 is an indexable turning insert designed for external and internal turning where a sharp cutting edge and high process security are required. PVD-coated carbide AH120 0.8 mm corner radius Rhombic ISO size 09 Single-sided chipbreaker with hole Increased productivity through consistent cutting performance The PVD-coated AH120 cutting grade is optimised for wear resistance and fracture toughness, delivering stable chip formation and extended tool life in turning operations. The combination of the carbide substrate and thin, robust coating reduces flank wear and supports predictable tool change intervals, which contributes directly to higher uptime on production lathes. By selecting this grade, process planners achieve a measurable improvement in repeatability and a reduction in unplanned stoppages, especially in medium-duty turning tasks. Robust geometry for reliable machining and clamping With a 0.8 mm corner radius, a 7° relief angle and an 80° included angle, the insert geometry balances edge strength and versatility for both finishing and light roughing. The rhombic form in ISO size 09 together with the cylindrical hole and one-sided countersink (40°–60°) ensures secure location in compatible ISO holders and straightforward assembly with standard clamping sets. The single-sided chipbreaker is matched to the grade to promote consistent chip control and surface quality while maintaining cutting-edge stability. Practical application guidance and material suitability Designed specifically for turning, the indexable plate suits both external and internal operations when matched to an appropriate holder and cutting parameters. The PVD-coated carbide is particularly effective where a sharp cutting edge and process safety are priorities; it performs well across a wide range of steels and is recommended when predictable wear behaviour and reduced edge chipping are required. For best results, pair the insert with a holder that matches the form, tolerance class and thickness (3.97 mm) and choose cutting data aligned with the insert’s chipbreaker and the workpiece material. For reliable turning with the Tungaloy AH120 grade, contact Metav Werkzeuge for purchase and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge can advise on holder compatibility and cutting parameters. Technical Data Article number: 6818339 SKU: 6818339-Tungaloy Manufacturer SKU: TUN6818339 Model series: ISO turning inserts Brand: Tungaloy Facts Thickness: 3.97 mm Corner radius: 0.8 mm Included angle: 80° Relief angle: 7° ISO size: 09 Materials & Special features Material: Carbide (PVD-coated AH120) Shape: Rhombic Hole: Cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: Single-sided Application: Turning (external and internal) Series: ISO turning insert CCMT09T308 FAQ What materials is this insert suitable for? The CCMT09T308 AH120 insert is specified for turning and the PVD-coated AH120 grade provides wear resistance and edge strength suitable for a broad range of steels and general turning applications. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge robustness compared with finer radii, improving resistance to chipping during interrupted cuts while still allowing reasonable surface finish in finishing operations with the CCMT09T308 insert. Which holder features are required for secure clamping? A compatible ISO turning holder that matches the rhombic form, thickness (3.97 mm), tolerance class and the insert’s hole style is required for secure clamping of the CCMT09T308 AH120 plate. Can this insert be used for internal turning? Yes, the design and geometry of this indexable insert make it suitable for both external and internal turning when the correct holder and cutting data are used. What advantages does the AH120 grade provide in production? The AH120 grade delivers a balance of wear resistance and fracture toughness, supporting stable chip formation, extended tool life and consistent results in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide reliability, a sharp cutting edge and ISO compatibility for steady productivity and reduced tool change frequency. Available to order via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. CCMT 09T308 AH120 Tungaloy indexable insert for turning (ISO 09T308) A CCMT09T308 AH120 indexable turning insert designed for external and internal turning, offering high wear resistance and process-secure cutting in ISO-compliant tool systems. PVD-coated carbide grade AH120 Sharp cutting edge for process security Rhombic ISO form 09 with 80° cutting angle Cylindrical hole with 40°–60° single countersink Consistent productivity through a wear-resistant cutting grade The PVD-coated carbide grade AH120 delivers a balance of wear resistance and edge strength suited to demanding turning operations. The coating provides a hard, thin layer that reduces abrasive wear and preserves a sharp cutting edge, which in turn maintains dimensional accuracy over longer runs. For production environments where cycle times and repeatability matter, this cutting grade supports stable metal removal rates and helps to reduce unplanned tool changes, contributing to overall process efficiency and lower unit costs. Clear compatibility rules to avoid setup errors Compatibility within ISO systems is determined by geometry and tolerance: form, relief angle, tolerance class, clamping method, size and thickness. The rhombic form 09 and standardised mounting dimensions ensure the insert fits any matching holder when these parameters align. The central feature to check is the insert’s hole and countersink style, which here is a cylindrical hole with a single-sided countersink at 40°–60°; this secures correct seating and torque transmission during turning. Making these checks before mounting reduces downtime and prevents clamping-related failures. Geometry and chip control explained for reliable finishes An 80° cutting angle combined with a 7° relief provides a robust cutting geometry that balances shear action and flank clearance. The 0.8 mm corner radius increases edge strength for interrupted cuts and improves surface integrity on finished components. The insert’s single-sided chipbreaker is designed to control chip formation according to workpiece material and machining stability; selecting the appropriate chipbreaker and feed parameters reduces the risk of built-up edge and promotes consistent surface quality. These geometric choices support both roughing and finishing tasks when matched to machine rigidity and process parameters. Where the insert adds value and how to specify it Intended for general turning applications, the indexable insert is suited to both external and internal turning operations where a sharp, wear-resistant edge is required. For best results, pair the insert with a holder that matches the ISO dimensions and confirm the clamping set and spare screws as part of the system. The grade’s combination of wear resistance and chipping resistance makes it a pragmatic choice for mixed-production shops seeking predictable tool life. For application-specific guidance—material pairing, recommended feeds or chipbreaker selection—consult Metav Werkzeuge’s technical documentation or speak with a specialist to align the insert with machining objectives. For application advice or availability of the Tungaloy AH120 grade, contact Metav Werkzeuge for prompt consultation and order handling — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6824254 Manufacturer SKU: TUN6824254 Item SKU: 6824254-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade: AH120 Facts Size: 09 Insert designation: 09T308 Thickness: 3.97 mm Corner radius: 0.8 mm Cutting angle: 80° Relief angle: 7° Hole: with hole Hole style: cylindrical hole + single countersink (40°–60°) Special features Rhombic insert form Single-sided chipbreaker PVD-coated carbide Designed for external and internal turning ISO-standardised geometry FAQ What machining tasks is this insert intended for? The insert is intended for turning operations; the CCMT09T308 AH120 Tungaloy indexable insert suits both external and internal turning tasks where wear resistance and edge stability are required. How does the AH120 grade improve tool life? The AH120 grade uses a PVD-coated carbide structure that reduces abrasive wear and resists chipping, which helps the insert maintain a sharp cutting edge and extend effective life in many turning applications. Which holders are compatible with this ISO insert? Compatibility depends on matching form, relief angle, tolerance class, clamping method, size and thickness; holders conforming to the ISO 09 form and the 3.97 mm thickness will accept the insert when these parameters align. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius increases edge strength and typically produces a robust surface finish; it is well suited to operations where a balance between roughing stability and acceptable surface integrity is needed. How does the hole and countersink affect mounting? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure seating and correct torque transfer when clamped with the appropriate screw and pad, reducing the risk of insert movement during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH120 Wendeplatten - Tungaloy
Combine robust wear resistance, a sharp 0.8 mm nose radius and ISO compatibility for predictable turning performance; obtain reliable inserts and expert advice from Metav Werkzeuge for seamless production planning. CCMT 09T308 AH120 – Indexable turning insert, PVD-coated carbide (Tungaloy) CCMT 09T308 AH120 is an ISO-standard indexable insert designed for external and internal turning, offering a sharp cutting edge and high process security. PVD-coated carbide grade AH120 Sharp 0.8 mm nose radius 7° clearance for reliable cut Rhombic form with cylindrical hole Engineered for stable cutting and long life The PVD-coated carbide grade AH120 delivers a balance of wear resistance and edge strength that supports continuous turning operations. The coating enhances surface hardness and reduces adhesive wear, while the substrate maintains fracture resistance; together these properties extend the effective tool life and reduce unexpected downtime. Specified geometry such as the 0.8 mm nose radius and the defined clearance angle (7°) contribute to a consistent cutting action, enabling stable chip formation and repeatable machining results across batch runs. Designed to increase workshop productivity A single-sided chipbreaker combined with the robust grade reduces rework and supports predictable tool change intervals, improving overall machine uptime. The insert’s profile and sharp edge are optimised for achieving a good surface finish with reduced cutting forces, which can lower cycle times and tool costs per component. Compatibility with ISO holders ensures quick replacement and minimal set-up time; choosing the right chipbreaker and grade for the workpiece and machine rigidity converts these technical features into measurable production benefits. Clear mounting and dimensional data to aid selection The insert follows ISO norms for turning plates and must be paired with a matching clamping set and holder determined by form, free angle, tolerance class, fastening method, size and thickness. Important dimensional facts include a 3.97 mm plate thickness, a rhombic 80° included angle, and a cylindrical hole with a single-sided countersink (40°–60°) for secure seating. These details simplify procurement and ensure the plate locates correctly in standard external or boring holders, avoiding instability that can compromise finish and tool life. Practical application guidance for turning tasks This indexable plate is intended specifically for turning applications where a sharp cutting edge and process reliability are required. The combination of PVD-coated surface and a tough carbide substrate makes it suitable for operations that demand consistent edge retention and resistance to chipping. Select the plate variant and chipbreaker that best match the workpiece material, cutting mode and machine rigidity to transform material properties into dependable production outcomes with predictable tool performance. Contact Metav Werkzeuge to discuss the Tungaloy AH120 grade for the intended turning application and to receive tailored recommendations on holder compatibility and chipbreaker selection; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: 6824258 Manufacturer SKU: TUN6824258 Metav SKU: 6824258-Tungaloy Type designation: CCMT09T308 Label: CCMT09T308 AH120 Tungaloy-Wendeplatte Facts Plate thickness: 3.97 mm Nose radius: 0.8 mm Clearance angle: 7° Included angle: 80° Size: 09 Special features Material: carbide Coating: PVD Shape: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) FAQ What materials is this insert intended to machine? This CCMT 09T308 AH120 indexable insert from Tungaloy is designed for turning operations where a sharp cutting edge and process security are required; select the appropriate chipbreaker and parameters to match the specific workpiece material. How does the AH120 grade improve tool life? The PVD-coated AH120 grade combines surface hardness with a fracture-resistant substrate, which reduces adhesive wear and chipping for longer, more predictable tool life in the CCMT 09T308 format. Which holder features are necessary for correct mounting? Secure mounting requires a holder that matches the rhombic form, size 09, plate thickness and the cylindrical hole plus single-sided countersink; correct tolerance class and fastening method ensure stable seating. Is this insert suitable for both external and internal turning? Yes, the ISO-standard geometry and the single-sided chipbreaker make the plate suitable for both external and internal turning tasks when paired with the correct holder and cutting data. Can this insert be used on high-speed operations? The PVD coating and the AH120 substrate provide wear resistance appropriate for demanding turning tasks; verify machine rigidity and cutting parameters to determine suitability for high-speed conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade tailored for stainless steels, a rhombic CCMT09T308 geometry with a 0.8 mm corner radius, and clear specifications for holder compatibility to keep turning operations consistent and productive. Order the CCMT09T308 AH6225 insert directly via Metav Werkzeuge or consult Metav Werkzeuge for application advice. CCMT 09T308 AH6225 indexable turning insert by Tungaloy — PVD-coated carbide, rhombic 09 CCMT09T308 AH6225 is an ISO-form indexable insert for external and internal turning, designed for medium machining of stainless steels and variable production conditions PVD-coated carbide for stainless steels Sharp yet stable cutting edge Rhombic 09 form, 80° approach angle Single-sided chipbreaker, 0.8 mm corner radius Consistent performance for stainless steel turning The insert is made from a PVD-coated carbide grade AH6225, engineered as a universal grade for stainless steels. The combination of a sharp yet resilient edge and the selected coating improves heat resistance and wear behaviour during interrupted cuts or changing feed conditions. As a result, the cutting edge delivers repeatable surface finish and dimensional control, supporting stable cycle times in serial and batch turning applications. Secure compatibility and reliable clamping for production Compatibility with toolholders depends on form, clearance, tolerance class, fixing method, size and thickness; this ISO-compliant plate simplifies selection for standard holders. The rhombic form with an 80° approach angle and a 7° clearance angle provides predictable engagement during external and internal turning. A central hole with a cylindrical bore and a single-sided countersink (40°–60°) ensures straightforward clamping and repeatable seat positioning, reducing setup variance and enhancing process reliability. Design features that support productivity and tool life The single-sided chipbreaker is matched to the grade for efficient chip control in medium turning operations, while the 0.8 mm corner radius balances edge strength and surface integrity. With a plate thickness of 3.97 mm and ISO size 09, the geometry suits common holders and applications where a compromise between rigidity and accessibility is required. The PVD-coated carbide substrate offers extended tool life under varying cutting conditions, contributing to lower tool-change frequency and steady productivity. For reliable turning results with Tungaloy inserts, contact Metav Werkzeuge for availability and tailored machining advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947666 SKU: 6947666-Tungaloy Manufacturer SKU: TUN6947666 Model series: ISO turning indexable inserts Designation: CCMT09T308 Grade: AH6225 Material: carbide Thickness: 3.97 mm Facts Corner radius: 0.8 mm Insert size: 09 Approach angle: 80° Clearance angle: 7° Plate form: rhombic Special features PVD-coated grade AH6225 Single-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) For external and internal turning (Drehen) Universal grade for stainless steels FAQ What materials is this insert suitable for? The CCMT09T308 AH6225 Tungaloy indexable insert (SKU 6947666-Tungaloy) is specified as a universal PVD-coated carbide grade optimised for machining stainless steels in medium turning operations. How does the chipbreaker affect machining? The single-sided chipbreaker on this rhombic insert promotes controlled chip formation and evacuation; matched with the AH6225 grade it reduces recutting and supports consistent surface quality during interrupted or variable cuts. Which toolholders are compatible with this ISO plate? Compatibility is governed by the insert form, size, thickness and fixing geometry; the ISO CCMT09T308 designation and its central hole with countersink enable use with standard CCMT-compatible turning holders when the holder specification matches the insert geometry. What advantages does the 0.8 mm corner radius provide? A 0.8 mm corner radius offers a balance between edge strength and surface finish: it increases edge stability under load while maintaining the ability to achieve the desired profile and tolerance in typical turning operations. Is this insert suitable for external and internal turning? Yes; the CCMT09T308 geometry and the AH6225 universal grade are intended for both external and internal turning tasks where medium machining and variable cutting conditions occur. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade optimised for stainless steels, a 0.8 mm corner radius for reliable edge strength, and ISO compatibility for straightforward toolholder integration; order the inserts through Metav Werkzeuge or request tailored application advice from our consultants. CCMT09T308 AH6225 Tungaloy turning insert – PVD-coated carbide, 0.8 mm corner radius The CCMT09T308 AH6225 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a sharp yet stable cutting edge for medium machining of stainless steels. ISO rhombic insert CCMT09T308 AH6225 PVD-coated carbide for stainless steel 0.8 mm corner radius, 80° cutting angle Cylindrical hole with 40°–60° countersink Increased productivity with a universal cutting grade The AH6225 grade, delivered as a PVD-coated cemented carbide insert, combines edge sharpness and robustness to handle medium cutting depths and fluctuating machining conditions. This balance reduces the need for frequent tool changes and supports longer uninterrupted runs, which in turn improves process efficiency on stainless-steel parts. The sharp, stable cutting edge minimises built-up edge formation in many common stainless alloys, while the coating supports thermal and abrasive resistance during sustained operation. Reliable clamping and repeatable geometry for consistent results Manufactured to ISO dimensions, the insert’s rhombic geometry and 80° cutting angle ensure straightforward compatibility with standard holders; fit is governed by form, clearance angle, tolerance class, attachment and plate thickness. The central cylindrical hole with a single-sided countersink (40°–60°) facilitates secure clamping and repeatable seating, reducing setup variability. The 3.97 mm thickness and precise tolerances contribute to stable cutting behaviour and predictable tool life when paired with appropriate underlay, clamping set and replacement screws. Application benefits and machining guidance A 0.8 mm corner radius delivers a compromise between edge strength and profile definition: it supports modest radii required for finishing while preserving robustness under interrupted cuts. The one-sided chipbreaker assists in controlling chip formation for many turning tasks, helping to protect the insert’s edge and the workpiece surface finish. Intended for turning operations, the insert is suitable for both external and internal work when combined with a matching ISO holder. If further details are needed on feeds, speeds or holder compatibility, Metav Werkzeuge provides application support via email or phone at info@metav-werkzeuge.com and +49 2822 7131930. For tailored advice on using the Tungaloy CCMT09T308 AH6225 insert in stainless-steel turning and to request suitable holder recommendations, contact Metav Werkzeuge for application guidance and ordering assistance. Technical data Article number: 6903270 SKU: 6903270-Tungaloy Manufacturer SKU: TUN6903270 Model series: ISO turning inserts Brand: Tungaloy Core dimensions Size: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Cutting angle: 80° Special features Material: cemented carbide Coating: PVD Chipbreaker: one-sided Plate form: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert suitable for? The CCMT09T308 AH6225 insert is formulated for machining stainless steels; the AH6225 grade and PVD coating offer a good balance of edge stability and wear resistance for medium turning operations. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength compared with smaller radii, providing improved resistance to chipping during interrupted cuts while still allowing acceptable surface finishes for general turning tasks. Is the insert compatible with ISO holders? Yes. The insert conforms to ISO dimensions (CCMT09T308) and requires a holder that matches form, clearance angle, tolerance class, attachment and thickness — the ISO-standard geometry ensures broad compatibility. What fastenings and clamping features does this insert require? The insert features a central cylindrical hole with a single-sided countersink (40°–60°) and is intended to be used with a matching underlay or clamping set and replacement screws for secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide grade AH6225 in an ISO CCMT format to get a sharp yet stable cutting edge for consistent mid-range turning of stainless steels; for tailored advice or availability, contact Metav Werkzeuge or request support from our consultants. CCMT 09T308 AH6225 ISO turning insert — rhombic CCMT, 80° included angle, Tungaloy CCMT09T308 AH6225 is an ISO‑standard rhombic turning insert designed for external and internal turning; the insert combines a PVD-coated carbide grade for reliable edge stability with a single‑sided chipbreaker for controlled chips under varying conditions. PVD-coated carbide AH6225 Optimised for stainless steel turning Rhombic CCMT shape, 80° cutting angle Single-sided chipbreaker, sharp stable edge Reliable edge geometry for consistent machining results The combination of AH6225 grade and a PVD-coated surface provides a balance between edge sharpness and robustness, which is particularly valuable when machining stainless steel. The coating enhances resistance to built-up edge and heat, while the carbide substrate maintains dimensional stability during typical medium‑duty turning. This results in fewer interruptions for insert changes and a more predictable tool life, supporting higher uptime and process reliability on the shop floor. ISO compatibility and straightforward holder selection Produced to ISO specifications in the CCMT format, the insert ensures compatibility with most standard CCMT holders when matching form, relief angle and tolerance. The geometry features an 80° included angle and a 7° relief angle, with a plate thickness of 3.97 mm and a 0.8 mm corner radius; the mounting uses a cylindrical hole with a one‑sided countersink (40°–60°). These standardised dimensions simplify holder choice and tool assembly, reducing setup time and the risk of mismatched fixtures. Improved chip control and surface quality The one‑sided chipbreaker is designed for effective chip control in both external and internal turning operations, producing predictable chip flow that reduces the likelihood of surface damage. The sharp yet stable cutting edge contributes to a clean finish at typical cutting parameters for mid‑range turning. Overall, the insert helps to shorten cycle times and maintain consistent workpiece quality, which benefits production runs and subcontract machining where repeatability is crucial. Suitable applications and selection advice Intended primarily for turning applications, the insert is best applied where material conditions vary and operators need a universal grade for dependable performance. The PVD-coated AH6225 is particularly suited to stainless steel, delivering stable cutting behaviour under variable feeds and speeds. For optimal results, select the chipbreaker and specific holder combination according to workpiece stability and the desired surface finish; this measured approach minimises tool wear and supports efficient material removal. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy inserts and to confirm stock and delivery options — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947660 Manufacturer SKU: TUN6947660 Model series: ISO‑turning inserts Designation: CCMT09T308 AH6225 Tungaloy insert Dimensions & core data Size designation: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Included angle: 80° Relief angle: 7° Materials & features Material: Carbide Coating / grade: PVD‑coated AH6225 Shape: Rhombic (CCMT) Hole type: with hole — cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: Turning (external and internal) FAQ Which materials is this insert suited for? The CCMT09T308 AH6225 insert is optimised for machining stainless steel and performs well in varied turning conditions thanks to the PVD‑coated AH6225 grade. How is the insert mounted in a toolholder? The insert uses a standard CCMT mounting with a cylindrical hole and one‑sided countersink; matching holder form, relief angle and tolerance class is required for correct assembly of the Tungaloy insert (SKU TUN6947660). What cutting geometry helps with surface finish? The rhombic CCMT shape with an 80° included angle and a 0.8 mm corner radius provides a stable cutting edge that contributes to good surface quality during medium‑duty turning. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning operations when paired with an appropriate holder and consideration for workpiece stability. What are the main benefits of the AH6225 grade? The PVD‑coated AH6225 grade delivers a sharp yet robust cutting edge, improved heat resistance and reliable chip control, which together reduce interruptions and support consistent production results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Reliable, sharp cutting from a PVD‑coated carbide grade with a 0.8 mm corner radius delivers stable mid‑range performance for stainless‑steel turning; combined with the ISO CCMT geometry and secure cylindrical‑hole clamping, setup and repeatability are improved. Order the CCMT09T308 AH6225 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T308 AH6225 Tungaloy indexable insert for turning — PVD‑coated carbide, 0.8 mm radius CCMT09T308 AH6225 Tungaloy indexable insert designed for ISO‑standard external and internal turning, offering a sharp yet stable cutting edge for stainless‑steel machining in varied conditions PVD‑coated carbide for stainless steels 80° rhombic CCMT geometry 0.8 mm corner radius for precision finishing Cylindrical hole with single‑sided countersink Consistent cutting performance for stainless steels The CCMT09T308 AH6225 insert is a PVD‑coated carbide grade developed as a universal choice for stainless steels, optimised to deliver a sharp, stable cutting edge under changing conditions. The AH6225 grade balances wear resistance and toughness, which reduces edge chipping while retaining cutting efficiency during medium cutting depths. For production environments requiring predictable tool life and consistent surface quality, this grade provides measurable improvements in process stability and reduces unexpected downtime. Fast, reliable clamping and straightforward tool matching Engineered to the ISO CCMT form, the rhombic plate and cylindrical hole with single‑sided countersink ensure reliable mechanical clamping in compatible holders. Compatibility is governed by plate shape, 7° clearance angle, tolerance class, fastening geometry, size and 3.97 mm plate thickness, so selection of the correct outer holder or boring bar is decisive. The standardised interface helps shorten setup times and secures repeatable position accuracy for serial production and frequent index changes. Improved surface finish and controlled chip formation With an 80° approach angle and a 0.8 mm corner radius, the insert supports fine finishing passes while maintaining load distribution across the edge. The integrated single‑sided chipbreaker promotes predictable chip shapes and evacuation, decreasing rework and protecting workpiece finish. In combination, these features deliver a reliable surface quality on both external and internal turning operations and help meet tighter dimensional tolerances with fewer tool interventions. Practical system design and application guidance As part of a complete turning system — ISO insert, matching external holder or boring bar, support shim/clamping set and replacement screws — this plate integrates seamlessly into established tool setups. The universal AH6225 grade is suitable for varied cutting strategies: choose the chipbreaker and insert geometry according to workpiece stability and machining depth. For workshop planners and process engineers, the predictable behaviour of this insert simplifies tool inventory decisions and supports efficient production planning. For precision stainless‑steel turning with Tungaloy PVD‑coated carbide, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6796245 SKU: 6796245-Tungaloy Manufacturer SKU: TUN6796245 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Grade: AH6225 Facts Corner radius: 0.8 mm Approach angle: 80° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 09 Special features ISO designation: CCMT09T308 Plate form: rhombic Coating: PVD Chipbreaker: single‑sided Hole: cylindrical hole + one‑sided countersink (40°–60°) Application: Turning (external and internal) Schneidstofftyp: PVD‑coated carbide FAQ Which materials is this insert best suited for? The CCMT09T308 AH6225 Tungaloy insert is primarily designed for stainless steels, offering a balanced wear resistance and toughness for medium cutting conditions; it performs well where a sharp but stable edge is required. Can this plate be used for internal turning and grooving? Yes — the rhombic CCMT geometry and the single‑sided chipbreaker make the plate suitable for both external and internal turning tasks when paired with an appropriate boring bar or holder. How does the AH6225 grade influence tool life? The AH6225 grade, with its PVD coating, provides improved wear resistance under varying cutting conditions, which supports longer tool life and consistent component quality across production batches. What should be considered when selecting a holder? Holder compatibility depends on plate form, 7° clearance angle, tolerance class, fastening style, plate size and thickness; using a holder specified for CCMT‑type inserts ensures secure clamping and positional repeatability. How does the chipbreaker affect machining? The single‑sided chipbreaker is designed to produce manageable chip shapes and facilitate evacuation, improving surface finish and reducing the risk of rework in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Reliable PVD‑coated carbide grade AH6225 for stainless steels combined with the CCMT geometry and a 0.8 mm corner radius delivers a durable, sharp cutting edge and consistent chip control; benefiting medium‑duty turning cycles and predictable tool life. Order the CCMT09T308 AH6225 Tungaloy indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T308 AH6225 Tungaloy – ISO indexable turning insert for turning, PVD‑coated carbide, 0.8 mm corner radius The CCMT09T308 AH6225 Tungaloy is an ISO‑standard indexable insert designed for external and internal turning of stainless steels, engineered to maintain a stable cutting edge under changing conditions. ISO‑standard rhombic insert, size 09 PVD‑coated carbide grade AH6225 0.8 mm corner radius for edge strength Cylindrical hole with 40°–60° countersink Consistent performance for stainless steel turning The combination of a PVD coating and the AH6225 grade offers a balance between wear resistance and toughness, which is particularly advantageous when machining stainless steels. The coating reduces built‑up edge tendency and improves sliding properties at the chip‑tool interface, while the carbide substrate keeps the cutting edge stable under medium cutting forces. For process planners, this means fewer tool changes and more predictable component quality, translating into higher machine uptime and consistent surface finishes. Geometry and mounting that reduce variability The CCMT geometry (rhombic insert, size 09) with an 80° approach angle, 0.8 mm corner radius and 7° relief provides a controlled engagement and favourable force distribution at the tool tip. The insert thickness of 3.97 mm and the included cylindrical hole with a one‑sided countersink (40°–60°) ensure secure clamping in ISO holders; correct seating is defined by form, clearance angle, tolerance class and fixing method. The single‑sided chipbreaker supports consistent chip formation in turning operations, reducing risk of chatter and improving surface integrity. System advantages and production benefits Used as part of a matched system—insert, external holder or boring bar, shim and clamp—the indexable solution simplifies tool management and replacement. The universal nature of the AH6225 grade makes it suitable across a broad range of stainless alloys, minimising the number of tool types required in inventory. Process engineers will value the predictable tool life and steady cutting behaviour, which aid cycle time planning and reduce rework. Selecting the correct chipbreaker and maintaining a rigid setup are key to unlocking these efficiency gains. Practical selection and setup guidance When specifying the insert, consider the workpiece alloy and machining stability: tighter rigs and higher feed rates benefit from larger radii, while fine finishing calls for smaller corner radii. The PVD coating refers to a thin, durable layer applied in a vacuum process to enhance wear resistance; the corner radius affects both edge strength and surface finish. For the CCMT09T308 AH6225 variant, pairing with a compatible ISO holder and using the recommended clamping hardware ensures repeatable positioning and safe cutting conditions. For unfamiliar applications, testing with conservative feeds and speeds will confirm suitability before full production. For optimal performance in stainless steel turning, contact Metav Werkzeuge for application advice and to order the Tungaloy CCMT09T308 AH6225 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829017 SKU: 6829017-Tungaloy Manufacturer SKU: TUN6829017 Model series: ISO‑turning indexable inserts Core specifications Corner radius: 0.8 mm Relief angle: 7° Insert angle: 80° Thickness: 3.97 mm Insert size: 09 Materials & features Material: carbide Grade/coating: AH6225 (PVD‑coated carbide) Shape: rhombic (CCMT) Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning Compatibility note: ISO‑standard insert; check holder form, clearance and size FAQ What materials is this insert best suited for? The CCMT09T308 AH6225 is optimised for stainless steels, combining a PVD coating with a carbide substrate to limit built‑up edge and provide reliable edge strength during medium‑duty turning. Can this insert be used for both external and internal turning? Yes, the rhombic CCMT shape and the single‑sided chipbreaker make this insert suitable for both external and internal turning operations when paired with the correct holder. How should the insert be clamped to ensure repeatability? Secure clamping using the matching ISO holder, appropriate shim and the specified fixing screw is required; the CCMT09T308’s cylindrical hole and countersink ensure positive seating and repeatable positioning. What does the AH6225 designation mean in practice? AH6225 denotes a PVD‑coated carbide grade tuned for a balance of toughness and wear resistance, offering a wide material coverage and stable chip formation for stainless steels. Are there recommended cutting conditions for initial testing? Begin with conservative feeds and moderate cutting speeds to validate the stability of the setup; once confirmed, feeds and speeds can be increased within the machine and workpiece limits to exploit the insert’s performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T308 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated carbide grade tuned for stainless steels and an ISO‑standard rhombic geometry to secure consistent cutting performance and surface quality; the sharp yet stable cutting edge and a 0.8 mm nose radius support reliable mid‑range turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T308 AH6225 — Indexable Turning Insert (ISO), PVD‑coated Carbide by Tungaloy The CCMT09T308 AH6225 is an ISO‑standard indexable insert for turning, designed for medium cutting of stainless steels with a balanced combination of sharpness and edge stability. ISO‑standard rhombic insert PVD‑coated carbide AH6225 For stainless steels and mixed conditions 80° geometry with 0.8 mm radius Consistent machining for stainless steels and mixed batches The combination of a PVD‑coated surface and a carbide substrate in grade AH6225 delivers a balance between wear resistance and cutting-edge sharpness, especially for stainless steels. This results in fewer interruptions for insert changes and a steadier surface finish during medium turning tasks. In practice, the coating reduces adhesive wear and improves heat resistance under variable cutting temperatures, while the substrate preserves a reliable cutting edge under intermittent loading. Such properties translate into improved process stability and can reduce total machining time for serial production and small-batch operations alike. ISO conformity and secure fit for a wide range of holders Built to the ISO dimensions specified by the CCMT 09T308 designation, this rhombic insert provides compatibility with holders defined by form, clearance angle, tolerance class, fastening and thickness. The 80° geometry and 7° clearance combine to give a robust cutting angle suitable for external and internal turning, while the cylindrical hole with single‑side countersink (40°–60°) ensures reliable clamping in standard clamp or screw systems. Correct matching of insert and holder reduces chatter and enables predictable repeatability across setups, simplifying tooling logistics on the shop floor. Process advantages: chip control and tool life The insert features a single‑sided chipbreaker tailored to medium turning operations; this aids controlled chip formation when machining ductile alloys such as stainless steels and helps protect the cutting edge during chip evacuation. The 0.8 mm nose radius provides a compromise between strength and surface finish, suitable for finishing passes or light to medium roughing where contour accuracy matters. Together, these design choices support longer effective tool life, fewer interventions and a more economical production flow — particularly valuable in high‑mix, low‑volume environments. Practical recommendations for reliable results Use the insert in a complete system consisting of a compatible ISO holder, clamping set and replacement screws to maintain repeatable clamping forces. Match the chipbreaker and grade AH6225 to the specific alloy and cutting parameters: slightly reduced cutting speeds and steady feed rates help when machining highly work‑hardening stainless grades. The ISO form and robust edge make the insert suited to both external and internal turning tasks; for unusual geometries or severe interrupted cuts, consider a more stable clamping arrangement or an alternative chip‑control geometry. Contact Metav Werkzeuge for individual application advice on the CCMT09T308 AH6225 indexable insert, compatibility checks with existing holders and recommendations for cutting data — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829228 Manufacturer SKU: TUN6829228 Model series: ISO‑turning indexable inserts Facts Insert designation: CCMT09T308 Grade/coating: AH6225, PVD‑coated Material: carbide Nose radius: 0.8 mm Plate thickness: 3.97 mm Geometry angle: 80° Clearance angle: 7° Hole: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Special features Rhombic plate form (09 size) ISO standard compliance Designed for turning (external and internal) Suited for stainless steels and mixed conditions Balanced sharp and stable cutting edge System use with holder, underlay/clamp and screws FAQ What materials is this insert intended for? The CCMT09T308 AH6225 indexable insert is optimised for stainless steels and performs well across mixed material batches where a sharp, stable cutting edge is required. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and plate thickness; the CCMT09T308 follows ISO dimensions to simplify matching. What is the advantage of the AH6225 grade? The AH6225 PVD‑coated carbide grade provides a compromise between heat and wear resistance and a sharp edge, enhancing performance during medium turning operations. Is the nose radius suitable for finishing? The 0.8 mm nose radius offers a good balance between strength and surface finish and is suitable for finishing passes as well as light to medium roughing. Does the insert include a chipbreaker? Yes, the insert has a single‑sided chipbreaker designed for controlled chip formation in medium turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of durable PVD-coated cemented carbide, precise geometry and secure mounting for consistent turning performance; this insert is tailored for demanding stainless steel and interrupted cutting. Order the CCMT insert via Metav Werkzeuge or consult our technical advisers for application-specific selection. CCMT 09T308 AH6235 — Tungaloy indexable turning insert for stainless steel CCMT 09T308 AH6235 is an ISO-standard indexable turning insert designed for external and internal turning applications where toollife and edge stability are critical PVD-coated cemented carbide AH6235 Optimised for stainless steel turning Rhombic CCMT 09 shape, 0.8 mm corner radius With cylindrical hole and 40°–60° countersink High-performance grade for challenging stainless steel work The PVD-coated AH6235 grade is a tougher cemented carbide designed specifically to cope with the demands of machining stainless steel and other materials prone to work hardening. Its coating and substrate combination increase resistance to edge chipping in interrupted cuts and improve thermal stability at elevated cutting temperatures. As a result, cycle times are more predictable and insert life is extended, which supports efficient production planning and lower tooling costs per part. Geometry and clamping that ensure reliable chip control The rhombic CCMT shape and integrated one-sided chipbreaker deliver consistent chip formation and evacuation when matched with the correct holder and cutting parameters. The insert is supplied with cylindrical hole and a single-sided countersink (40°–60°) to secure a positive, repeatable clamping interface; compatibility with a given holder depends on form, relief angle, tolerance class, fastening method, size and thickness. In workshop practice, the insert forms part of a system — insert, appropriate external holder or boring bar, shim/clamp and replacement screws — that together determine cutting stability and surface finish. Clear dimensional advantages for flexible process design A 0.8 mm corner radius balances edge strength and achievable surface finish, making the insert suitable for medium-feed finishing and light roughing in unstable setups. The geometry includes a 7° relief angle, an 80° included angle and a 3.97 mm thickness, which together provide mechanical robustness and deflection resistance when cutting under moderate radial depths. Selecting the correct chipbreaker and matching the AH6235 grade to the workpiece material and machining strategy reduces the risk of built-up edge and unplanned tool changes, improving overall process reliability. For durable, process-safe turning in stainless steel applications we recommend the Tungaloy AH6235 grade — contact Metav Werkzeuge for individual application advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting data. Technical data Article number: 6890155 Manufacturer SKU: TUN6890155 Brand: Tungaloy Core specifications Insert designation: CCMT09T308 Insert size: 09 Corner radius: 0.8 mm Included angle: 80° Relief angle: 7° Plate thickness: 3.97 mm Hole style: cylindrical hole with single-sided countersink (40°–60°) Materials & features Material: cemented carbide, PVD coating AH6235 Shape: rhombic (CCMT) Chipbreaker: one-sided Application: turning; suitable for stainless steel and interrupted cuts Mounting: with hole, compatible with ISO holders FAQ What materials is this insert best suited for? The CCMT09T308 AH6235 Tungaloy indexable insert (SKU 6890155-Tungaloy) is optimised for stainless steel and applications with interrupted cuts where enhanced edge toughness is required. Can the insert be used for both external and internal turning? Yes, the insert geometry and ISO designation allow use in both external and internal turning operations when paired with a suitably rated external holder or boring bar. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and helps prevent chipping, offering a compromise between surface finish and tool robustness for medium-feed operations. Is the insert compatible with standard ISO CCMT holders? The CCMT09T308 is an ISO-standard insert; compatibility with a holder depends on form, relief angle, tolerance class, fastening and plate thickness — ensure the holder matches these parameters for secure clamping. What advantages does the AH6235 PVD coating provide? The AH6235 coating enhances wear resistance and thermal stability, reducing the likelihood of breakout and improving toollife in demanding stainless steel machining scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade and a robust 0.8 mm corner radius for stable machining in stainless-steel applications; the insert delivers consistent edge life and reduced chipping in interrupted cuts — order the CCMT09T308 AH6235 directly via Metav Werkzeuge or consult their technical team for application advice. CCMT09T308 AH6235 Tungaloy turning insert — PVD-coated carbide, 0.8 mm radius A CCMT09T308 AH6235 indexable insert engineered for turning operations, optimised for rostfreier Stahl and interrupted cuts while ensuring reliable chip control and extended tool life PVD-coated AH6235 for stainless steels 0.8 mm corner radius for robust edge stability ISO CCMT09T308 rhombic insert, 80° wedge angle Cylindrical hole with 40°–60° single-side countersink Consistent performance for demanding stainless-steel turning The insert combines a PVD-coated carbide grade with a geometry tailored to heavy-duty turning, providing a balance between wear resistance and toughness. The AH6235 grade is formulated to resist chipping during interrupted cuts and to handle the work-hardening tendency of stainless steel, which reduces unplanned tool changes and improves process throughput. PVD coating (physical vapour deposition) creates a thin, hard surface layer that lowers friction and improves thermal resistance; in practice this means fewer edge failures and a more consistent surface finish on turned components. Robust edge stability and improved process security A 0.8 mm corner radius increases edge strength and helps to absorb shock loads common in roughing and interrupted operations, resulting in longer effective cutting life and more predictable tool wear. The one-sided chipbreaker supports controlled chip formation for typical turning tasks and contributes to safer chip evacuation. These characteristics translate into tangible efficiency gains: fewer index positions are consumed per workpiece and machine uptime is optimised, supporting stable batch production and reduced rework. Easy integration into ISO tool systems and versatile mounting Compatibility with toolholders is determined by form, clearance, tolerance class, fastening, size and thickness; the insert follows ISO norms for rhombic plates and fits common external holders and boring bars when the correct shim or clamp set and screws are used. The part features a cylindrical hole with a single-side countersink (40°–60°) to suit standard clamping systems and to ensure secure fixation under radial and axial loads. System setup typically comprises the ISO insert, a matching external holder or boring bar, an underlay/clamp set and replacement screws, which simplifies procurement and replacement logistics. For technical application advice or to confirm stock and compatibility for the Tungaloy CCMT09T308 AH6235 insert, contact Metav Werkzeuge — they provide quick sourcing and application support for turning challenges. Technical data Article number: 6890166 Manufacturer SKU: TUN6890166 Product SKU: 6890166-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Wedge angle: 80° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 09 Special features Material: carbide Coating/sort: AH6235 (PVD-coated) Plate form: rhombic Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Typical application: turning; suited to interrupted cuts and rostfreier Stahl System components: insert, matching external holder or boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert best suited for? The CCMT09T308 AH6235 insert is designed primarily for rostfreier Stahl (stainless steel) and performs well in interrupted cuts where toughness and edge stability are required. How does the AH6235 grade improve machining stability? AH6235 is a PVD-coated carbide grade offering enhanced toughness and thermal resistance; in the CCMT09T308 geometry it reduces chipping and extends edge life under variable cutting conditions. Can the insert be used for finishing passes? While the grade and 0.8 mm radius favour robustness, the geometry and chipbreaker support a reasonable surface finish; selection of feed and speed determines final surface quality. What determines holder compatibility for this insert? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness — the CCMT09T308 follows ISO norms to simplify matching with standard holders and boring bars. Is the insert supplied with screws or clamps? The CCMT09T308 AH6235 is an individual indexable plate; system assembly typically requires a matching underlay/clamp set and replacement screws as separate components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of robust PVD coating (AH6235), stable rhombic geometry and proven compatibility with ISO toolholders for reliable turning performance; order directly via Metav Werkzeuge or consult the technical team for process-specific setup and optimisation. CCMT 09T308 AH6235 CCMT turning insert by Tungaloy — PVD-coated carbide, 0.8 mm radius CCMT09T308 AH6235 is a rhombic turning insert designed for general external and internal turning, optimised for interrupted cuts and challenging stainless steel applications ISO rhombic CCMT insert PVD-coated carbide AH6235 0.8 mm nose radius, 7° clearance Cylindrical hole with countersink Reliable chip control for challenging interrupted cuts The PVD-coated AH6235 grade is formulated as a tougher carbide to resist edge fracture during intermittent cuts and unstable conditions. Combined with a single-sided chipbreaker, this insert reduces the risk of built-up edge and sudden breakouts, which leads to more consistent cycle times and fewer unexpected re‑changes. For components in stainless or hard-to-machine alloys, the grade and geometry provide a measured balance between edge strength and finish quality, helping to maintain process stability under variable cutting conditions. Accurate seating and compatibility for repeatable results Designed to the ISO series dimensions, the rhombic geometry and the standard form ensure straightforward compatibility with a broad range of external holders and boring bars. The insert’s 7° clearance, 80° included angle and 3.97 mm thickness contribute to secure clamping and reduced vibration when mounted correctly. Knowing these parameters simplifies holder selection: match the form, tolerance class, fastening method, size and thickness to achieve repeatable tool positioning and dimensional stability on successive parts. Durable coating and cost‑effective tool life The PVD coating applied to the carbide substrate increases resistance to abrasion and minimizes microchipping on the cutting edge, particularly when machining stainless steels. This improved resistance translates into longer intervals between indexings and replacements, lowering tool consumption per component and supporting a more economical production flow. The reinforced edge toughness of the AH6235 grade also helps to protect the tool during brief encounters with inclusions or interrupted cuts, reducing scrap and rework. System guidance for straightforward integration Integration into an existing tooling system is simple: the insert forms part of a modular setup that includes a matching outer holder or boring bar, a clamping shim and a suitable screw set. The cylindrical hole with one-sided countersink (40°–60°) provides stable centring and repeatable fixation in friction clamp systems. Select the chipbreaker and grade according to the workpiece material and machine stability to achieve the best balance between surface finish and tool life; small adjustments to feed and depth of cut often yield significant improvements in process reliability. Contact Metav Werkzeuge for application advice on Tungaloy turning inserts and availability — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: 6890162 Manufacturer SKU: TUN6890162 SKU: 6890162-Tungaloy Series: ISO-Drehwendeschneidplatten Material: carbide Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.8 mm Clearance angle: 7° Included angle: 80° Special features Grade/coating: AH6235, PVD-coated carbide Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning ISO designation: CCMT09T308 FAQ What materials is this insert best suited for? The AH6235 grade is intended for tougher workpieces and is particularly suitable when machining stainless steels and materials prone to edge breakout; the CCMT09T308 insert shows good resistance to chipping in interrupted cuts. How does the plate geometry affect holder choice? Compatibility depends on form, clearance, tolerance class, fastening and thickness; the ISO rhombic shape and 3.97 mm thickness of this insert allow use with standard CCMT-compatible external holders and boring bars. Is the CCMT09T308 AH6235 suitable for finishing operations? Yes, when combined with an appropriate feed and cutting speed the PVD-coated grade and 0.8 mm nose radius can deliver acceptable surface quality for many finishing tasks. What is the benefit of the cylindrical hole with countersink? The cylindrical hole with one-sided countersink (40°–60°) ensures secure seating and repeatable clamping, improving stability and reducing the risk of insert rotation under load. How should the chipbreaker be selected for a specific job? Select the chipbreaker based on workpiece material, depth of cut and machine stability; the single-sided chipbreaker on this insert is aimed at improving chip control in interrupted and unstable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com