Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 09T308 AH725 Wendeplatten - Tungaloy
Take advantage of a universal, PVD‑coated AH725 carbide grade combined with ISO conformity and a compact 0.8 mm corner radius for reliable external and internal turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for advice on holder compatibility and chipbreaker selection. CCMT 09T308 AH725 ISO turning insert, PVD‑coated carbide — Tungaloy CCMT09T308 AH725 is an ISO‑standard rhombic turning insert designed for general turning applications on steels and stainless steels ISO‑standard rhombic insert PVD‑coated AH725 for steels and stainless steels 0.8 mm corner radius for robust edge 7° clearance angle for stable cutting Reliable performance for mixed‑material production The CCMT09T308 AH725 insert delivers consistent chip control and process security across a wide range of steels. The PVD‑coated carbide grade AH725 is engineered for universal use and resists premature edge breakdown when workpiece materials vary or when small tool sizes are required. In practice, this means fewer unexpected tool changes and a steadier production rhythm; the coating reduces abrasive wear while the substrate maintains toughness. The result is improved uptime and an economical balance between tool life and cutting performance. Geometry that ensures repeatable accuracy A well‑defined cutting geometry directly supports reproducible surface quality and tool life. The rhombic ISO form, with an included angle of 80° and a 0.8 mm corner radius, is suitable for both finishing and light roughing tasks, offering a compromise between strength and small‑radius profiling. The 7° clearance minimises rubbing and lowers cutting forces, while the plate thickness of 3.97 mm contributes to stable clamping. The insert’s hole is a cylindrical bore with a single‑side countersink (40°–60°), which assists secure seating in the pocket and straightforward indexability for fast replacement. System compatibility and practical application advice This insert functions as part of a complete ISO turning system: an indexable insert, a matching outer holder or boring bar, and the correct clamping set with replacement screws. Compatibility is determined by form, clearance, tolerance class, fixation and plate thickness, so selecting the correct holder geometry is essential for achieving the advertised performance. The one‑sided chipbreaker and universal AH725 grade are particularly suitable where frequent material changes occur or where process reliability is paramount. Typical uses include external and internal turning tasks on unalloyed and alloyed steels as well as stainless steels; choose the chipbreaker and grade to match the desired surface finish and stability. Practical benefits for workshop productivity Adopting this PVD‑coated indexable plate supports a predictable production workflow: fewer tool failures, consistent surface finishes and lower process variability. The universal nature of the grade minimises the number of different inserts required on the tool trolley, simplifying inventory and reducing setup time. For shops aiming to balance cost and uptime, this insert offers a pragmatic solution that prioritises process security, stable chip formation and dependable edge performance. Contact Metav Werkzeuge today for tailored advice on integrating Tungaloy AH725 inserts into existing turning systems and for assistance in selecting the matching holders and clamping sets Technical data Manufacturer item number: 6865357 SKU: 6865357-Tungaloy Manufacturer SKU: TUN6865357 Designation: CCMT09T308 AH725 Tungaloy-Wendeplatte Brand: Tungaloy Material: carbide Model series: ISO‑turning inserts Facts Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Thickness: 3.97 mm Size: 09 Special features PVD‑coated carbide grade AH725 Rhombic plate form (CCMT) One‑sided chipbreaker Cylindrical hole + single‑side countersink (40°–60°) Suitable for external and internal turning Compatible with ISO holders and boring bars FAQ What materials is this insert suitable for? The CCMT09T308 AH725 insert is intended primarily for steel and stainless steels; the universal AH725 grade provides stable performance across a broad material range. Which applications are typical for this geometry? Typical applications include external and internal turning operations where a balance of edge strength and small‑radius profiling is required. How does the coating improve performance? The PVD coating on the AH725 grade enhances wear resistance and supports consistent chip control, extending effective tool life under varying cutting conditions. What should be checked when choosing a holder for this insert? Ensure holder compatibility by matching the insert form, clearance angle, tolerance class, fixation method, plate size and thickness; correct seating prevents vibration and secures repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 grade, a versatile 0.8 mm corner radius, and ISO compatibility for consistent, productive turning operations; order directly via Metav Werkzeuge or consult the team for application support. CCMT 09T308 AH725 turning insert by Tungaloy — PVD-coated carbide, 0.8 mm radius CCMT09T308 AH725 is a rhombic ISO turning insert designed for reliable external and internal turning in mixed steel work; compatible with standard holders and engineered for secure clamping and stable chip control. CCMT09T308 rhombic insert, ISO standard PVD-coated AH725, universal for steel and stainless 0.8 mm corner radius for stable cutting action Hole with 40°–60° single-sided countersink Consistent wear resistance and secure cutting with PVD-coated grade The PVD-coated AH725 grade combines a wear-resistant carbide substrate with a hard, thin coating to deliver extended tool life under diverse turning conditions. This composition is designed to keep the cutting edge stable when machining steel and stainless steel, reducing flank wear and preserving geometry over longer tool paths. The benefit for production is twofold: fewer insert changes and a more consistent surface finish, which supports tighter tolerances and reduces rework. For operations that alternate between materials or use smaller tooling, the AH725 grade provides a balance of toughness and abrasion resistance that maintains process reliability. ISO compatibility and secure mounting for uninterrupted runs The rhombic plate is produced to ISO specifications, so compatibility with appropriate turning holders is determined by form, relief angle, tolerance class, clamping design, size and plate thickness. The combination of a 7° relief angle and an 80° included angle ensures predictable cutting engagement and reduced tool vibration when the insert is correctly seated. The plate’s cylindrical hole with single-sided countersink (40°–60°) facilitates reliable screw clamping in standard seat designs. As a result, set-up times are minimised and mechanical repeatability is improved, supporting continuous, long-cycle production where fixture stability is essential. Process benefits: chip control, edge strength and application guidance A 0.8 mm corner radius provides a robust cutting edge that promotes edge strength and improved surface integrity on external profiles and shoulder faces. The single-sided chipbreaker helps to manage chips during turning, lowering the risk of built-up edge and keeping evacuation predictable. Typical uses include both external and internal turning where a compromise between edge strength and surface finish is required. Selection of the correct chipbreaker and the AH725 grade for the prevailing material and machining stability will result in higher process security and consistent part quality. Contact Metav Werkzeuge for tailored advice on using the Tungaloy CCMT09T308 AH725 turning insert and to arrange supply or cutting trials through Metav Werkzeuge. Technical data Article number: 6856765 SKU: 6856765-Tungaloy Manufacturer SKU: TUN6856765 Brand: Tungaloy Product designation: CCMT09T308 AH725 Facts Plate size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 80° Special features PVD-coated carbide, grade AH725 Rhombic plate, ISO turning insert series Single-sided chipbreaker Cylindrical hole with 40°–60° single-sided countersink Suitable for turning steel and stainless steel Designed for external and internal turning FAQ Which materials is this insert suitable for? The CCMT09T308 AH725 insert by Tungaloy is formulated for machining steel and stainless steel, offering a versatile balance of toughness and wear resistance for mixed-material production. What is the corner radius and how does it affect the result? The insert features a 0.8 mm corner radius, which strengthens the cutting edge and improves surface finish while offering a degree of robustness for profile and shoulder turning. How is the insert clamped in the holder? Clamping is achieved via the cylindrical hole with a single-sided countersink (40°–60°), compatible with commonly used screw-clamp holders for ISO rhombic plates. Can this insert be used for both external and internal turning? Yes, the CCMT09T308 AH725 is designed for both external and internal turning operations when matched with a suitable holder and the correct chipbreaker for the task. What advantages does the AH725 grade provide over uncoated grades? The AH725 PVD coating improves abrasion resistance and maintains the cutting-edge geometry longer than uncoated grades, resulting in fewer indexings and enhanced process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of universal PVD-coated AH725 grade, precise 0.8 mm corner radius, and ISO conformity for stable turning operations; order directly via Metav Werkzeuge or consult our advisors for process-matching recommendations. CCMT 09T308 AH725 turning insert — Tungaloy The CCMT 09T308 AH725 is an ISO rhombic turning insert designed for versatile external and internal turning applications where process reliability and resistance to chipping are required. Universal PVD-coated AH725 grade for mixed steels Rhombic CCMT shape with 80° included angle 0.8 mm corner radius for controlled chip formation Cylindrical hole with single-side countersink for secure clamping High-performance grade for mixed steels and stainless steels The PVD-coated AH725 grade offers a balance of toughness and wear resistance that suits changing workpiece materials. For turning of both plain steel and stainless steel, the combination of the PVD-coated carbide substrate and the optimised microstructure reduces the risk of edge chipping and premature wear. This results in more consistent tool life across batches and less unplanned downtime, which supports predictable production planning and lower overall machining costs. Geometry engineered to stabilise the cutting process The rhombic insert geometry with an 80° included angle and a 0.8 mm corner radius promotes stable cutting forces and a repeatable cut profile. The single-sided chipbreaker design improves chip control in interrupted cuts and varying depths of cut, while the 7° relief angle helps reduce rubbing and heat generation at the flank. Together these features lead to improved surface finish and reduced rework, especially beneficial when switching between roughing and finishing passes. Clear compatibility and easy integration into existing tool systems The insert conforms to ISO dimensions and the CCMT format, making it compatible with common external holders and boring bars when form, relief angle, tolerance class, fastening method, size and thickness match. The central cylindrical hole with a single-side countersink (40°–60°) secures the insert reliably in the pocket and simplifies index changes. For operations that demand quick set-ups and reproducible clamping, this insert supports efficient tool management and minimises bench time. Practical benefits for process security and productivity Choosing the CCMT 09T308 in AH725 provides predictable performance in variable production environments. The grade is particularly appropriate for smaller tool sizes and applications where process security is critical: shorter trial phases, consistent batch-to-batch results and stable chip formation reduce scrap rates and support higher machine utilisation. Where mixed-material runs or frequent material changes occur, the insert’s universal character reduces the need for multiple specialised grades. Contact Metav Werkzeuge for tailored cutting strategies and to secure matching holders and spare screws for Tungaloy inserts — our specialists can advise on optimal speeds, feeds and clamping for immediate production benefits Technical Data Article number: 6864924 SKU: 6864924-Tungaloy Manufacturer SKU: TUN6864924 Product designation: CCMT09T308 AH725 Tungaloy turning insert Material: carbide Coating/grade: AH725 (PVD-coated) Core technical data Insert size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Included angle: 80° Relief angle: 7° Hole: with hole — cylindrical hole + single-side countersink (40°–60°) Special features ISO rhombic CCMT insert format Single-sided chipbreaker Universal, chipping-resistant grade for steel and stainless steel Suitable for external and internal turning Compatibility determined by geometry, tolerance and clamping system FAQ What materials is this insert suitable for? The CCMT 09T308 AH725 insert is designed for general turning and is especially suitable for steel and stainless steel applications due to the toughness and wear resistance of the AH725 grade. How does the 0.8 mm corner radius affect the cut? A 0.8 mm corner radius gives a balance between edge strength and surface finish: it reduces the likelihood of chipping while delivering a good machined surface for both roughing and light finishing passes. Is the insert compatible with standard CCMT holders? Yes, the insert follows ISO CCMT dimensions; compatibility depends on matching form, relief angle, tolerance class, fastening and thickness to the holder. What advantages does the PVD coating bring? The PVD-coated surface enhances wear resistance and adhesion strength, improving performance under varying cutting speeds and delivering consistent tool life across mixed-material batches. Which article number and SKU should be ordered for replacement? Use article number 6864924 or SKU 6864924-Tungaloy when ordering the CCMT09T308 AH725 turning insert from Metav Werkzeuge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH725 Wendeplatten - Tungaloy
Benefit from a combination of process security, versatile material compatibility and predictable tool life for smoother turning operations; order or request advice via Metav Werkzeuge for professional support. CCMT 09T308 AH725 CCMT turning insert – PVD-coated carbide, 0.8 mm radius | Tungaloy The CCMT09T308 AH725 is a rhombic ISO indexable insert crafted for external and internal turning, offering a balanced geometry for stable chip control and reliable cutting performance. *PVD-coated AH725 for broad material range *Universal for Stahl and rostfreier Stahl *Rhombic ISO CCMT 09, 0.8 mm corner radius *Cylindrical hole plus single-side countersink Optimise process reliability with a universal PVD grade The AH725 grade is a PVD-coated carbide formulated for broad applicability across Stahl and rostfreier Stahl, giving a stable cutting edge where material mixes are common. The coating improves wear resistance while the substrate maintains toughness, which together reduce the risk of edge breakouts in smaller tools or less rigid setups. This combination delivers a noticeable improvement in process security and makes the insert suitable for shops that require predictable tool life across varied turning tasks. Geometry that delivers consistent chip control and surface quality The insert's rhombic shape in CCMT 09 format, combined with a 0.8 mm corner radius and an 80° main angle, provides a versatile contact geometry that supports both finishing and light roughing operations. A one-sided chipbreaker promotes reliable chip formation and evacuation, lowering the chance of re-cutting and improving surface finish consistency. The 7° clearance angle further helps reduce rubbing and thermal build-up, translating into stable cutting conditions and fewer interruptions for tool change. Compatible system design and straightforward integration Designed as an ISO indexable insert, the component integrates into standard holder systems where compatibility is defined by form, clearance angle, tolerance class, fastening and plate thickness. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°), simplifying secure clamping in compatible carriers. Using a universally engineered grade and standardised dimensions reduces set-up complexity, shortens downtime during changeover and supports a more economical machining routine over time. For process-critical turning tasks, consult Metav Werkzeuge for tailored recommendations on the CCMT09T308 AH725 Tungaloy insert and compatible holders — contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 6856699 Manufacturer SKU: TUN6856699 Model series: ISO turning indexable inserts Material: Hartmetall (carbide) Numerical data Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 09 Main angle: 80° Clearance (frewinkel): 7° Design & special features Rhombic plate form CCMT09T308 PVD-coated grade AH725 One-sided chipbreaker With cylindrical hole and single-side countersink (40°–60°) Suitable for external and internal turning Universal, break-resistant grade for Stahl and rostfreier Stahl FAQ Which materials are best suited to this insert? The CCMT09T308 AH725 indexable insert from Tungaloy is designed for machining a wide range of materials, specifically Stahl and rostfreier Stahl, offering a good compromise between wear resistance and toughness. How does the AH725 grade affect tool life? The AH725 PVD coating enhances wear resistance while the carbide substrate provides edge strength; together they promote consistent tool life and reduced edge chipping in mixed-material production. Is the insert compatible with standard CCMT holders? Compatibility depends on holder form, clearance angle, tolerance, fastening and plate thickness; the CCMT format and hole/countersink design are standard for many CCMT holders, but verification against the holder specification is recommended. What cutting applications suit the one-sided chipbreaker? The one-sided chipbreaker is suitable for both finishing and light to medium turning where controlled chip formation and safe evacuation are required, improving surface quality and process stability. Can this insert be used for internal turning as well as external turning? Yes — the geometry and breakage-resistant AH725 grade make the insert applicable for both external and internal turning operations when matched with an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH8005 Wendeplatten - Tungaloy
Combining PVD‑coated carbide AH8005, ISO compatibility and a 0.8 mm corner radius delivers consistently productive external and internal turning with fewer tool changes. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT 09T308 AH8005 indexable turning insert – PVD‑coated carbide, 0.8 mm radius (Tungaloy) The CCMT 09T308 AH8005 is an ISO‑standard rhombic indexable insert for external and internal turning, engineered for stable machining of heat‑resistant alloys and other hard materials. ISO rhombic insert CCMT 09T308 PVD‑coated carbide AH8005 0.8 mm corner radius for fine profiling Cylindrical hole with 40°–60° countersink Consistent productivity through wear‑resistant grade and geometry The combination of a PVD‑coated carbide substrate and the AH8005 grade is intended to provide wear resistance under elevated temperatures encountered when machining heat‑resistant alloys. The rhombic plate form with an 80° included angle and a 7° clearance angle balances edge strength and accessibility, so operators gain longer tool life and fewer insert changes. In practice, this means less downtime for index changes and more predictable cycle times in serial production, supporting a smoother machining process. Straightforward ISO compatibility reduces setup time Designed to the ISO series for turning inserts, the plate form, tolerance class, size and thickness ensure reliable fit with common external holders and boring bars. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) for secure clamping; the 3.97 mm plate thickness provides robust support under load. These standardised interfaces simplify inventory management and make replacement straightforward within existing tool systems, reducing the effort required to qualify new tooling. Application guidance for best results in turning operations This insert is optimised for external and internal turning where stable setups are available; the one‑sided chipbreaker promotes controlled chip formation when matched to the workpiece material and cutting data. For heat‑resistant alloys and other hard materials, selecting the appropriate holder rigidity and cutting parameters will exploit the AH8005 grade’s strengths: improved edge life and consistent surface finish. The indexable system typically comprises the ISO insert, a compatible external holder or boring bar, a shim/clamp set and replacement screws for reliable mounting. For application support or stock availability of the Tungaloy CCMT 09T308 AH8005 insert, contact Metav Werkzeuge for tailored advice and ordering assistance (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: 6749961 Manufacturer SKU: TUN6749961 SKU: 6749961-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 09 Clearance angle: 7° Included angle: 80° Manufacturer article number: 6749961 Special features Material: carbide Coating / grade: PVD, AH8005 Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: Turning FAQ What materials is this insert suitable for? The CCMT 09T308 AH8005 insert is designed for heat‑resistant alloys and other hard materials; the PVD‑coated carbide AH8005 provides enhanced wear resistance in such applications. Is the insert ISO‑compatible with common turning holders? Yes; the ISO‑standard geometry, size 09 and the specified plate thickness allow the insert to fit matching ISO external holders and boring bars when the holder matches the form and tolerance class. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius offers a compromise between edge strength and detail: it improves edge robustness for longer life while still enabling reasonably fine profiling and surface finish on turned parts. What does the hole style mean for clamping reliability? The cylindrical hole with a 40°–60° countersink secures the insert reliably in the clamp, helping to maintain repeatable positioning and stable cutting conditions during turning operations. Can this insert be used for both roughing and finishing? Yes; the CCMT 09T308 AH8005 is applicable to both roughing and finishing, provided the machine setup is sufficiently rigid and cutting data are adjusted to match the material and desired surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T308 AH8005 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, stable chip control and precise geometry for consistent productivity; order directly via Metav Werkzeuge or request advice from our consultants for process-specific recommendations. CCMT 09T308 AH8005 ISO turning insert for turning — Tungaloy The CCMT09T308 AH8005 is an ISO-standard rhombic turning insert designed for precision external and internal turning of heat‑resistant alloys and hard materials in stable setups PVD-coated carbide grade AH8005 ISO rhombic insert CCMT 09 profile 0.8 mm corner radius for precision One-sided chipbreaker, hole with countersink Longer tool life through optimised coating and substrate The combination of a PVD-coated surface and a wear‑resistant carbide substrate in grade AH8005 extends tool life under elevated temperatures and abrasive conditions. The hard, thin coating reduces adhesion and diffusion wear, which leads to fewer insert changes and more productive cutting time. For shops machining heat‑resistant alloys, this translates into predictable tool performance and reduced downtime, as the coated substrate maintains edge integrity during prolonged cuts. Precision geometry for consistent surface finish and repeatability A rhombic ISO CCMT geometry with a 0.8 mm corner radius provides a balance between strength and finishing capability. The moderately small radius allows controlled cutting forces while still producing a fine surface texture on the workpiece. The insert’s relief angle of 7° and the included 80° approach geometry contribute to stable contact conditions at the cutting edge, which benefits repeatable part quality when paired with an appropriate holder and machine stiffness. Secure clamping and chip control for efficient turning cycles The insert is supplied with a hole and a cylindrical hole plus a single‑side countersink (40°–60°), enabling positive seating and secure clamping to the toolholder. The one‑sided chipbreaker is engineered to produce manageable chip forms in stable cutting conditions, lowering the risk of chip tangling and improving process reliability. Together, these features support efficient cycle times and safer unattended cycles in production environments. Application guidance: choosing the right grade and setup Designed for turning applications, this ISO‑series insert suits both external and internal operations when the workholding and machine rigidity match the cutting conditions. The AH8005 grade is particularly suited to hard or heat‑resistant materials under stable machining; selecting the correct chipbreaker and holder geometry is essential to fully exploit the insert’s potential. For mixed or unstable setups, opt for a more robust radius or adjust feeds and speeds to maintain cutting stability. Contact Metav Werkzeuge for material‑specific cutting data or to request cutting trials; technical advice and sample availability are provided via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6749957 Manufacturer SKU: TUN6749957 SKU: 6749957-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: CCMT09T308 Insert size: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Approach/angle: 80° Special features Grade: AH8005 Substrate: carbide Coating: PVD Chipformer: one-sided chipbreaker Hole style: cylindrical hole + single-sided countersink (40°–60°) Plate shape: rhombic Typical use: external and internal turning FAQ What work materials is this insert suited to? The CCMT09T308 AH8005 Tungaloy insert is designed for heat‑resistant alloys and other hard materials; the AH8005 grade and PVD coating provide enhanced wear resistance for such applications. Can this insert be used for internal turning? Yes, the rhombic CCMT geometry and secure hole clamping make the insert suitable for both external and internal turning when used with a compatible holder and stable setup. What does the chipbreaker type mean for machining? A one‑sided chipbreaker on this insert produces managed chip forms in stable cuts, which improves process reliability and reduces chip interference during turning cycles. How important is the holder choice for this insert? Holder compatibility is critical: the insert’s form, relief angle, tolerance class, fastening method, size and thickness determine fit and performance; matching the holder ensures correct seat and cutting geometry. Is the corner radius suitable for finishing operations? The 0.8 mm corner radius offers a compromise between strength and finish quality, enabling precise surface textures while maintaining edge robustness in finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH8015 Wendeplatten - Tungaloy
Benefit from a blend of PVD-coated AH8015 carbide for improved wear resistance and a 0.8 mm corner radius with 7° clearance that supports stable cutting in ISO-compliant turning applications; order directly via Metav Werkzeuge or consult our specialists for integration into existing tool systems. CCMT 09T308 AH8015 indexable turning insert — PVD-coated carbide for turning (Tungaloy) A CCMT09T308 AH8015 indexable insert designed for ISO-compliant external and internal turning of heat-resistant alloys, offering a balanced combination of wear resistance and cutting-edge stability for productive machining. PVD-coated AH8015 carbide for wear resistance ISO CCMT 09T308 form, rhombic plate 09 0.8 mm corner radius with 7° clearance Cylindrical hole with single-side countersink One-sided chipbreaker for stable chip control High-performance grade for heat-resistant alloys The PVD-coated AH8015 grade is engineered as a first-choice solution for the general machining of heat-resistant alloys. The PVD-coated surface enhances wear resistance while the underlying carbide substrate maintains edge toughness, producing a balance between tool life and edge stability. This specification reduces the frequency of insert changes and supports consistent cycle times, making it suitable where repeatable performance and reduced downtime are required. Precise ISO form and secure mounting for reliable repeatability Manufactured to ISO geometry as CCMT 09T308, the insert features a rhombic plate format with a plate size of 09 and thickness of 3.97 mm, ensuring compatibility with standard ISO holders. The cylindrical hole with single-side countersink (40°–60°) permits secure clamping and predictable seating; combined with the 7° clearance angle and 0.8 mm corner radius, this yields controlled engagement with the workpiece and predictable tool behaviour under varying feed and depth-of-cut conditions. Controlled chips and consistent surface quality Equipped with a one-sided chipbreaker, the insert promotes orderly chip formation and evacuation during both external and internal turning operations. Improved chip control contributes directly to surface finish consistency and reduced risk of re-cutting or entanglement, translating into fewer interruptions and higher throughput. The chipbreaker geometry is matched to the grade to maintain a stable cutting edge even when encountering temperature-sensitive alloys. System-level efficiency and practical assembly The insert forms part of an ISO-based system comprising a matching external holder or boring bar, clamping pad and screws; correct selection of holder geometry, tolerance class and fastening ensures full benefit from the insert’s design. The balanced combination of AH8015 grade and the insert geometry supports lower overall tooling cost per component by extending service intervals and simplifying tool inventory through wide material applicability. For reliable machining of heat-resistant alloys, request availability of Tungaloy CCMT inserts from Metav Werkzeuge or contact Metav Werkzeuge’s technical advisers at info@metav-werkzeuge.com or +49 2822 7131930 to discuss integration and holder compatibility. Technical data Article number: 6825749 Manufacturer SKU: TUN6825749 Internal SKU: 6825749-Tungaloy Material: Hartmetall Model series: ISO-Drehwendeschneidplatten Core specifications Insert designation: CCMT09T308 Grade: AH8015 Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 09 Included angle: 80° Design & special features PVD-coated carbide Rhombic plate form Cylindrical hole with single-side countersink (40°–60°) One-sided chipbreaker Intended application: Turning (external and internal) Compatibility defined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert intended to machine? The CCMT09T308 AH8015 insert is optimised for machining heat-resistant alloys and general turning tasks where a balance of wear resistance and edge stability is required. How does the AH8015 grade affect tool life? The AH8015 PVD-coated carbide grade delivers enhanced wear resistance while maintaining cutting-edge stability, resulting in extended tool life and more consistent production runs with the Tungaloy turning insert. Which holder types are compatible with this insert? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; the ISO CCMT form permits use with standard ISO external holders and boring bars designed for 09-sized rhombic plates. What is the purpose of the single-side countersink on the hole? The cylindrical hole with a single-side countersink (40°–60°) ensures correct seating and secure clamping, supporting repeatable insert location and stable cutting conditions. Can this insert be used for internal turning as well as external turning? Yes, the geometry and chipbreaker design make the insert suitable for both external and internal turning applications, provided the selected holder offers appropriate support and rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH8015 Wendeplatten - Tungaloy
High-performance PVD-coated carbide insert with a 0.8 mm corner radius and 7° clearance for reliable machining of heat-resistant alloys. Compatible with ISO holders when matched by form, clearance angle, tolerance class, fastening, size and thickness; order the CCMT09T308 AH8015 turning insert directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. CCMT09T308 AH8015 ISO turning insert — PVD-coated carbide, 0.8 mm radius (Tungaloy) The CCMT09T308 AH8015 is an ISO-format turning insert designed for both external and internal turning, optimised for heat-resistant alloys and general-purpose machining where a balance of wear resistance and edge stability is required. PVD-coated carbide grade AH8015 ISO CCMT shape for standard holders 0.8 mm corner radius for robust edges Cylindrical hole with 40°–60° countersink Durable performance for heat-resistant alloys The insert combines a PVD-coated surface with a wear-resistant carbide substrate, making it a solid choice for machining temperature-stable alloys where sustained edge life is essential. The AH8015 grade is specified for a balanced combination of wear resistance and cutting-edge stability, which reduces frequency of index changes and supports consistent component finish. The one-sided chipbreaker aids predictable chip formation in typical turning operations, improving process reliability and reducing interruptions in production. ISO compatibility and secure clamping for consistent accuracy Supplied in the universal CCMT geometry, the insert aligns with ISO norms; compatibility with a holder depends on matching the insert form, 7° clearance, tolerance class, fastening style, size and thickness. The rhombic form with an 80° principal cutting-edge angle provides a favourable approach for many turning tasks, while the cylindrical hole with a unilateral countersink (40°–60°) ensures secure clamping and repeatable seating. With a plate thickness of 3.97 mm and an insert size of 09, mechanical fit and stability are straightforward to verify during tool selection and setup. Practical guidance for turning applications Intended for external and internal turning, the insert performs best when the chipbreaker and grade are chosen to match the workpiece material and the rigidity of the setup. The recommended system consists of the ISO insert together with a compatible external holder or boring bar, plus shim/clamp and replacement screws for safe assembly. The 0.8 mm corner radius offers a compromise between edge robustness and dimensional control, suitable for general finishing and light to medium roughing passes when stability is sufficient. Productivity benefits and lifecycle considerations By combining a PVD surface and a robust carbide substrate, the insert offers improved process security and predictable tool life, helping to lower overall machining costs through fewer tool changes and steadier surface quality. The balanced design supports stable chip formation and consistent cutting-edge behaviour, contributing to higher productivity in batch production or single-part runs where repeatability matters. Selection of the correct chipbreaker and machining parameters will further extend service intervals and reduce scrap risk. For enquiries about Tungaloy's PVD-coated AH8015 inserts and application-specific recommendations, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for fast, practice-oriented advice. Technical data Article number: 6825784 Manufacturer SKU: TUN6825784 Dealer SKU: 6825784-Tungaloy Facts Insert designation: CCMT09T308 Grade: AH8015 Material: carbide Coating: PVD Corner radius: 0.8 mm Plate thickness: 3.97 mm Insert size: 09 Clearance angle: 7° Principal cutting-edge angle: 80° Hole style: cylindrical hole + single-side countersink (40°–60°) Special features ISO turning insert, rhombic shape One-sided chipbreaker Application: turning (external and internal) Compatibility depends on form, clearance angle, tolerance, fastening, size, thickness System components: ISO insert, matching external holder or boring bar, shim/clip and spare screws Typical use: machining heat-resistant alloys FAQ What materials can this insert machine effectively? The CCMT09T308 AH8015 insert is intended primarily for heat-resistant alloys; the AH8015 grade provides a balanced wear resistance and cutting-edge stability suitable for such materials. Is the insert compatible with standard ISO holders? Yes—compatibility with a given holder requires matching the CCMT form, the 7° clearance angle, tolerance class, fastening type, insert size and thickness. What does the chipbreaker specification mean for performance? A one-sided chipbreaker on the insert promotes predictable chip control in typical turning operations, improving process reliability and surface finish when matched to the workpiece and machining conditions. How is the insert clamped in the toolholder? The insert features a cylindrical hole with a single-side countersink (40°–60°) to ensure secure seating and consistent clamping when used with the correct clamp or screw system. Which system components are usually supplied with the insert? The system comprises the ISO insert itself, a matching external holder or boring bar, a shim or clamping set and replacement screws as required for assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH8015 Wendeplatten - Tungaloy
Benefit from a robust mix of PVD-coated carbide, a one-sided chipbreaker and ISO compatibility to keep turning operations consistent and productive; order the CCMT09T308 AH8015 turning insert directly via Metav Werkzeuge or ask our consultants if needed CCMT 09T308 AH8015 Tungaloy turning insert — PVD-coated carbide, 0.8 mm radius A CCMT09T308 AH8015 insert designed for ISO-standard external and internal turning, optimised for heat-resistant alloy machining ISO-compatible rhombic CCMT form PVD-coated carbide AH8015 grade One-sided chipbreaker for stable chips 0.8 mm corner radius for accurate profiling Reliable cutting performance for heat-resistant alloys The PVD-coated carbide grade AH8015 delivers a balanced combination of wear resistance and edge stability, making it a first choice for general turning of heat-resistant alloys. The coating enhances oxidation and abrasion resistance at elevated temperatures, which translates into more consistent tool life and fewer unscheduled insert changes. With an asymmetric chipbreaker designed for one-sided operation, the insert supports controlled chip formation across a range of cutting conditions, reducing the risk of built-up edge and improving process repeatability. Secure clamping and ISO interchangeability for workshop efficiency Featuring the standard CCMT rhombic geometry and an 80° included angle, the insert offers predictable engagement and reliable seat fitment in ISO holders. The 7° clearance angle and a plate thickness of 3.97 mm ensure compatibility with common clamping systems; the insert has a cylindrical hole with a single-side countersink (40°–60°) to match many commercially available screws and locators. These design parameters simplify holder selection and reduce setup time, enabling faster tool changes and steadier machining cycles. Precise profile control and consistent surface finish A corner radius of 0.8 mm allows the insert to produce defined profiles while maintaining acceptable cutting forces for semi-finish and finishing passes. The one-sided chipbreaker is tuned to the insert geometry to deliver repeatable chip evacuation and to protect the cutting edge under variable feed rates. The combination of a medium corner radius and the AH8015 cutting grade helps to achieve a good surface quality on complex contours without excessive vibration, especially when paired with a rigid holder and correct cutting parameters. Practical system build and workshop integration This ISO turning insert works as part of a simple system: the insert, a matching external holder or boring bar, a support shim/clamp set and the correct fastening screws. Using ISO-standard components minimises inventory complexity and makes it easier to switch between insert grades for different materials or operations. The insert’s rhombic form and hole arrangement also support multi-purpose holders, so a single holder design can cover several insert sizes and applications, improving tooling economy and reducing downtime for tool changes. For tailored recommendations on Tungaloy CCMT09T308 AH8015 turning inserts and compatibility with existing toolholders, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6749958-Tungaloy Manufacturer article number: 6749958 Manufacturer SKU: TUN6749958 Model series: ISO turning inserts Facts Size designation: 09 Corner radius: 0.8 mm Plate thickness: 3.97 mm Included angle: 80° Clearance angle: 7° Special features Carbide substrate, PVD-coated (AH8015) Rhombic plate form (CCMT) Cylindrical hole with single-side countersink (40°–60°) One-sided chipbreaker Application: Turning (external and internal) FAQ Is this insert suitable for machining heat-resistant alloys? The AH8015 PVD-coated grade in the CCMT09T308 insert is designed as a first choice for general machining of heat-resistant alloys, providing a balance between wear resistance and cutting-edge robustness. Which holders are compatible with this insert? Compatibility depends on insert form, clearance angle, tolerance class, fastening and thickness; the CCMT form and 3.97 mm thickness suit standard ISO external holders and boring bars when the holder accepts CCMT 09 inserts. What cutting tasks suit the 0.8 mm corner radius? A 0.8 mm radius is appropriate for semi-finish and finishing passes where defined profiles and surface quality are required, offering a compromise between strength and fine edge definition. How does the chipbreaker affect production stability? The one-sided chipbreaker promotes controlled chip formation and evacuation, which improves process stability and reduces the likelihood of built-up edge during continuous turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a balanced AH8015 grade and ISO CCMT geometry for dependable machining of heat‑resistant alloys, together with a 0.8 mm corner radius that supports consistent surface finish and tool life; order via Metav Werkzeuge or consult the in‑house advisers for application-specific guidance. CCMT 09T308 AH8015 – Turning insert (PVD‑coated carbide, 0.8 mm radius) by Tungaloy A CCMT09T308 AH8015 insert engineered for general‑purpose external and internal turning, optimised for heat‑resistant alloys and for integration into standard ISO turning systems PVD‑coated AH8015 grade 0.8 mm corner radius for consistent finishes ISO CCMT geometry, 80° rhombic form Cylindrical hole with 40°–60° countersink Reliable wear resistance for heat‑resistant alloys The insert combines a PVD‑coated AH8015 carbide substrate that provides a balanced interplay between wear resistance and edge stability, making it a sound choice for machining heat‑resistant alloys. The coating enhances thermal resistance and reduces flank wear, which translates into fewer insert changes and a steadier process window. As a result, production runs benefit from predictable tool life and stable surface quality without sacrificing productivity. Geometry and chip control that simplify integration The ISO CCMT rhombic geometry (80°) with a 7° clearance angle and a single‑sided chipbreaker delivers controlled chip formation for a wide range of turning operations. The 0.8 mm corner radius supports a good compromise between robustness and finish quality. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, dimension and thickness; the insert’s standard 09 size and the cylindrical hole with a single‑side countersink (40°–60°) ensure straightforward mounting in matching external holders, bar tooling or adaptors. Practical system use and application guidance With a plate thickness of 3.97 mm and a rhombic shape designed for both external and internal turning, the insert is part of a complete system: insert, matching external holder or boring bar, shim/clamping kit and replacement screws. Selection of the chipbreaker and the AH8015 grade should be aligned with the material, cutting mode and machine/fixture stability to achieve the best compromise between productivity and tool life. For high‑stability setups the grade delivers excellent edge retention; in less rigid conditions selecting appropriate cutting parameters and holder rigidity will conserve insert life and surface integrity. For application advice, availability checks or to request delivery of the Tungaloy CCMT09T308 AH8015 turning insert, contact Metav Werkzeuge for technical consultation and prompt processing. Technical Data Article number: 6749962 Manufacturer SKU: TUN6749962 SKU: 6749962-Tungaloy Designation: CCMT09T308 AH8015 Tungaloy insert Core Data Corner radius: 0.8 mm Insert size: 09 Plate thickness: 3.97 mm Clearance angle: 7° Geometry angle: 80° Hole: with cylindrical hole + single‑side countersink (40°–60°) Features & Material PVD‑coated carbide (AH8015) Rhombic insert shape (ISO CCMT) Single‑sided chipbreaker Suitable for external and internal turning System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ Which materials is this insert optimised for? The CCMT09T308 AH8015 insert is optimised for machining heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for general‑purpose alloy turning. Is the insert suitable for internal turning and boring operations? Yes, the geometry and thickness of this rhombic insert allow use in internal turning when paired with a suitable boring bar or holder; selection of chipbreaker and machining parameters should match the workpiece and rigidity. How is holder compatibility determined? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness—matching the ISO CCMT geometry and the 3.97 mm thickness to a corresponding holder ensures correct seating and clamping. What chip control can be expected from the chipbreaker? The single‑sided chipbreaker is designed for consistent chip formation in turning of alloys, supporting controlled evacuation and reducing the risk of entanglement in typical turning applications. What are the key dimensional specifications of the insert? The insert has a 0.8 mm corner radius, an 80° rhombic geometry, 7° clearance and a plate thickness of 3.97 mm, with a cylindrical hole and a single‑side countersink (40°–60°). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, consistent tool life and straightforward ISO compatibility to maintain predictable turning cycles; order directly via Metav Werkzeuge or contact their consultants for application support. CCMT09T308 AT9530 CCMT turning insert for finishing — Tungaloy coated cermet, 0.8 mm radius CCMT09T308 AT9530 Tungaloy turning insert is an ISO‑standard, rhombic finishing insert designed for external and internal turning operations on steel. Coated cermet grade AT9530 for finishing ISO rhombic CCMT 09 form compatibility 0.8 mm corner radius for fine surface finish Cylindrical hole with single‑side countersink Improved surface finish and even wear for fine turning The AT9530 grade is a coated cermet developed for finishing and light machining of steel, delivering consistent flank wear and high surface quality. The combination of the fine‑grain cermet substrate and its coating promotes a stable cutting edge, which results in reduced built‑up edge and a more uniform tool life across batches. With a 0.8 mm corner radius, the insert preserves component geometry while smoothing high‑frequency surface irregularities; this makes it especially suitable where dimensional accuracy and cosmetic finish matter. Explanation of terms: cermet mixes ceramic and metallic properties to combine wear resistance with good edge strength for finishing cuts. Reliable ISO compatibility and secure clamping for production use Compatibility with tool holders is determined by insert form, 7° relief angle, tolerance class, fastening arrangement, size and thickness; the rhombic CCMT 09 geometry ensures broad availability of compatible external holders and boring bars. The insert is supplied as an ISO plate with a cylindrical central hole plus a single‑side countersink (40°–60°) to match common clamping systems; the plate thickness of 3.97 mm supports stable clamping and repeatable seating in the pocket. In practice, a complete system comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws to maintain consistent run‑in and quick index changes on the shop floor. Practical benefits and machining guidance for efficient turning The CCMT form with a one‑side chipbreaker and the AT9530 grade is optimised for smooth chip flow in finishing passes on steels of varied machinability. Where light cuts and moderate feedrates are used, expect favourable surface integrity and extended intervals between indexing. Selection advice: match the chipbreaker and grade to workpiece material and machine stability — a stiffer setup permits higher feed while preserving finish. The insert is suited to both external and internal turning where controlled metal removal and surface quality are critical, helping to reduce downstream finishing and inspection time while maintaining predictable tool costs. For precise finishing with Tungaloy’s AT9530‑coated cermet inserts, contact Metav Werkzeuge for tailored application advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6773730 Manufacturer SKU: TUN6773730 Facts Designation: CCMT09T308 Grade: AT9530 Material: carbide Plate form: rhombic (CCMT) Plate size: 09 Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 3.97 mm Included angle: 80° Special features Hole: cylindrical + single‑side countersink (40°–60°) Chipbreaker: one‑sided Typical application: turning Suitable for: finishing and light machining of steel FAQ Is this insert suitable for finishing steel components? The CCMT09T308 AT9530 insert from Tungaloy is specifically designed for finishing and light machining of steel, offering a coated cermet edge that promotes high surface quality and consistent wear (SKU TUN6773730). Which holders are compatible with this CCMT insert? Compatibility depends on holder form, tolerance class, fastening and pocket size; the rhombic CCMT 09 geometry and central hole with countersink allow use in a wide range of ISO‑compatible external holders and boring bars. What does the 0.8 mm corner radius mean for component finish? A 0.8 mm corner radius rounds the cutting edge slightly to improve surface integrity and reduce minor tool marks, making the insert well suited for parts that require smooth finishes and tight dimensional control. Can this insert be used for internal turning on a lathe? Yes, the geometry and thickness of the plate make it suitable for internal turning when paired with an appropriate boring bar; ensure the chipbreaker and grade selection match the workpiece and stability of the setup. How should the insert be clamped in the toolholder? Use a matching clamp/shim set and replace screws as needed; the insert’s central hole and single‑side countersink are configured for secure seating in standard ISO clamping systems (refer to holder manufacturer guidelines). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 GH730 Wendeplatten - Tungaloy
Benefit from the combination of a wear-resistant GH730 grade, a precise 0.8 mm corner radius and ISO compatibility for reliable turning performance; order the insert via Metav Werkzeuge or contact our consultants for specification support. CCMT09T308 GH730 indexable insert for turning — Tungaloy A CCMT09T308 GH730 indexable insert engineered for external and internal turning, featuring a single-sided chipbreaker and a cylindrical mounting hole with a 40°–60° countersink. ISO rhombic CCMT geometry for versatile turning GH730 grade: wear-resistant, balanced toughness 0.8 mm corner radius for precise edge definition Cylindrical hole with 40°–60° countersink Stable cutting performance for productive turning The GH730 carbide grade is formulated to balance wear resistance and toughness, delivering consistent cutting behaviour in demanding turning tasks. This combination reduces unexpected tool failure and supports predictable tool life, which improves process stability on production lines. The insert’s geometry and the single-sided chipbreaker are optimised for effective chip control during both external and internal turning, which helps maintain cycle times and contributes directly to manufacturing efficiency. Reliable fit and secure clamping for repeatable accuracy As an ISO-standard insert with a rhombic CCMT form, the component is designed to mate with compatible holders; fit depends on form, clearance, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole with a 40°–60° countersink and the 7° clearance angle ensure secure seating and correct rake orientation when used with matched clamping systems. Proper clamping reduces vibration and runout, which in turn improves dimensional repeatability and surface integrity on turned parts. Better surface finish and robust edge strength The 0.8 mm corner radius provides a balance between strength and finishing capability: small enough to achieve fine surface quality yet large enough to add support to the cutting edge under moderate feeds. The 3.97 mm plate thickness contributes to edge stability during interrupted cuts or heavier engagement, lowering the risk of edge chipping. The single-sided chipbreaker is tailored to form short, controlled chips for typical turning operations, simplifying chip handling and reducing the likelihood of rework. Practical advantages for shop-floor operations Using a standardised ISO insert simplifies inventory and tooling logistics while enabling quick index changes to restore a sharp cutting edge. The combination of a dedicated Tungaloy grade and ISO compatibility supports consistent tool performance across batches, aiding process planning and reducing unplanned downtime. Where surface quality and tool life are priorities, selecting the correct chipbreaker and pairing the insert with a suitable holder will yield measurable improvements in throughput and repeatability. For long-term process reliability with the Tungaloy GH730 grade, contact Metav Werkzeuge for ordering and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6820972 Manufacturer SKU: TUN6820972 SKU: 6820972-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.8 mm Clearance angle: 7° Lead/approach angle: 80° Plate thickness: 3.97 mm Plate size: 09 Special features Rhombic plate form (CCMT) Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-standard insert for external and internal turning Grade: GH730 (Tungaloy) With hole for secure mounting FAQ Is this insert suitable for both external and internal turning? Yes. The CCMT09T308 GH730 insert is intended for external and internal turning, with geometry and chip control features tailored to those operations. What clamping provisions are required for safe use? The insert requires a matched ISO CCMT holder that accommodates the form, clearance, tolerance class, fastening method, size and thickness; the cylindrical hole plus countersink secures correct seating. How does the GH730 grade influence tool life? GH730 is engineered to combine wear resistance and toughness; in the CCMT09T308 configuration this supports stable edge life and predictable wear, improving uptime and reducing insert changes. What effect does the 0.8 mm corner radius have on surface finish? A 0.8 mm radius gives a compromise between edge strength and finishing capability, enabling finer finishes at moderate feeds while maintaining resistance to edge chipping. Can the chipbreaker be used for different materials and feeds? The single-sided chipbreaker is optimised for common turning conditions; performance depends on workpiece material and cutting parameters, so selecting the suitable chipbreaker and grade for the material is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of GH730 wear resistance, ISO conformity and secure clamping for reliable turning results; order the CCMT09T308 GH730 Tungaloy indexable insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. CCMT 09T308 GH730 — Tungaloy indexable turning insert for external and internal turning The CCMT09T308 GH730 is an ISO‑standard rhombic indexable insert engineered for general turning, providing a balance of wear resistance and edge stability for a wide range of machining tasks. ISO‑standard rhombic insert for turning applications GH730 grade for enhanced wear resistance 0.8 mm corner radius for fine profile work 7° relief angle with cylindrical hole and countersink Consistent productivity through a wear‑resistant grade The GH730 grade, combined with a carbide substrate, delivers improved wear resistance and stable cutting edges under continuous turning conditions. This results in fewer index changes and longer tool life compared with uncoated alternatives, supporting predictable process times and lower tooling consumption. By favouring a grade that balances toughness and abrasion resistance, manufacturers obtain measurable productivity gains when machining medium‑duty components where edge stability is critical. Secure mounting and assured compatibility with ISO systems The insert is designed to integrate into standard ISO tool systems: compatibility depends on form, clearance (7°), tolerance class, fastening, size and thickness. The presented insert features a cylindrical hole with a single‑side countersink (40°–60°), enabling reliable clamping in matched holders. Correct clamping reduces vibration and repeatability errors, which translates into improved dimensional conformity and a lower scrap rate in serial production. Geometry and chip control for repeatable surface quality A rhombic insert geometry combined with a single‑sided chipbreaker provides controlled chip formation and consistent contact conditions. The 0.8 mm corner radius offers a compromise between edge strength and the ability to achieve refined profiles and surface finish. For finishing passes the smaller radius supports finer edges; for light roughing, the same geometry maintains edge stability. Choosing the appropriate chipbreaker and cutting parameters ensures efficient evacuation of chips and a steady surface result. System approach and practical application advice This item is supplied as an ISO indexable insert and forms part of a system consisting of the insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws. Use the CCMT09T308 GH730 where machining tasks demand reliable edge life and straightforward insert indexing. For mixed production runs, pairing the GH730 grade with a holder offering rigid support will enhance process security and repeatability without complex parameter tuning. Contact Metav Werkzeuge for tailored advice on selecting holders or optimising cutting data for Tungaloy tooling: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6820971 Manufacturer SKU: TUN6820971 Brand: Tungaloy Model series: ISO indexable turning inserts Type designation: CCMT09T308 GH730 Core measurements Corner radius: 0.8 mm Thickness: 3.97 mm Relief angle: 7° Insert size: 09 Included hole: cylindrical hole + single‑side countersink (40°–60°) Included angle: 80° Design & special features Rhombic insert shape Single‑sided chipbreaker GH730 Tungaloy grade Intended use: external and internal turning System components: insert, matching external holder or boring bar, shim/clamping set and spare screws ISO conformity; compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CCMT09T308 GH730 Tungaloy indexable insert is designed for general turning applications; the GH730 grade provides a balance of wear resistance and edge stability suitable for many commonly machined metals when matched with the correct chipbreaker and cutting data. How does the hole and countersink affect clamping? The cylindrical hole with a single‑side countersink (40°–60°) on the CCMT09T308 improves seating and concentric clamping in compatible holders, reducing the risk of slippage and enhancing repeatability during high‑volume turning. Can the 0.8 mm corner radius be used for finishing? Yes, the 0.8 mm corner radius on the CCMT09T308 supports finer profiles and improved surface finish in finishing passes while still maintaining adequate edge strength for light roughing. Is the insert compatible with all ISO CCMT holders? Compatibility requires matching the insert shape, clearance angle (7°), tolerance class, fastening method, size (09) and thickness (3.97 mm) with the intended CCMT holder; consult holder specifications or Metav Werkzeuge for verification. What is included in the system when planning a tool setup? A complete system typically comprises the indexable insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws to ensure secure mounting and straightforward serviceability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 GT9530 Wendeplatten - Tungaloy
Taking advantage of the GT9530 cermet grade together with the ISO CCMT 09T308 geometry delivers improved surface finish and extended tool life for stable turning operations; order the insert directly via Metav Werkzeuge or consult our advisors for selection support. CCMT 09T308 GT9530 indexable insert (cermet, 0.8 mm) for turning — Tungaloy The CCMT09T308 GT9530 is an ISO-standard indexable insert for turning, engineered for finishing to light universal turning in steel, combining a wear-resistant cermet grade with a fine corner radius. Wear-resistant cermet grade GT9530 ISO CCMT 09T308 geometry 0.8 mm corner radius for fine finishing Cylindrical hole with one-side countersink Improved finishing and longer tool life through material choice The coated cermet grade GT9530 offers high wear resistance and is optimised for finishing and light universal turning of steel. Cermet combines hard ceramic particles with metallic binders to resist flank wear while producing a superior surface finish compared with conventional carbides in comparable conditions. The result is fewer insert changes and a more consistent part-quality output in stable set-ups, which benefits batch production and precision components. The insert designation and material choice together reduce dressing and rework, contributing to measurable process efficiency. Geometry and clamping that support reliable machining The ISO CCMT geometry and rhombic plate shape deliver a balance between cutting-edge strength and accessibility for external and internal turning. The 0.8 mm corner radius helps to achieve fine edge strength without compromising surface quality, while the 7° relief angle ensures controlled chip flow. With a cylindrical hole and a one-side countersink (40°–60°) the insert is compatible with standard ISO clamping systems; correct holder selection is determined by form, tolerance class, fastening and thickness. The plate thickness of 3.97 mm and the standard size 09 provide robust support in the pocket and reduce the risk of movement under steady cutting forces. Application guidance and selection advice for consistent results Designed as a wear-resistant finishing to light universal grade for steel, the insert performs best under stable cutting conditions and continuous cuts; interrupted cuts or heavy roughing are outside its primary strength. The single-sided chipbreaker is matched to the grade for effective chip control in typical turning operations. When selecting tooling, match the chipbreaker and grade to the workpiece material and machine rigidity to exploit the GT9530 advantage fully. For process optimisation and holder compatibility, technical consultation can help specify the correct clamping set, screw and pad combination for the chosen machine and application. For tailored recommendations and to order CCMT 09T308 GT9530 inserts from Tungaloy, please contact Metav Werkzeuge for expert support and fast delivery; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998288 SKU: 6998288-Tungaloy Manufacturer SKU: TUN6998288 Model series: ISO-Drehwendeschneidplatten Label: CCMT09T308 GT9530 Tungaloy indexable insert Material: cemented carbide Facts Corner radius: 0.8 mm Thickness: 3.97 mm Relief angle: 7° Lead/approach angle: 80° Size: 09 Special features ISO CCMT 09T308 designation Coated cermet grade GT9530 Rhombic plate form Cylindrical hole with single-side countersink (40°–60°) Single-sided chipbreaker Intended for finishing to light universal turning of steel FAQ What materials is this insert intended for? The CCMT 09T308 GT9530 insert is optimised for turning of steel and provides good results in finishing to light universal applications thanks to the wear-resistant cermet grade. How does the GT9530 grade benefit machining? GT9530 combines ceramic hardness with metallic toughness to deliver improved wear resistance and superior surface finish in stable cutting conditions, extending tool life and reducing rework. Which holder types are compatible with the insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the insert uses an ISO CCMT pocket with a cylindrical hole and a single-side countersink for standard clamping systems. Is the insert suitable for heavy roughing or interrupted cuts? This grade and geometry are primarily intended for finishing and light general-purpose turning; heavy roughing or highly interrupted cuts are not the ideal application for this insert. What dimensions should be considered when specifying the insert? Key dimensions include the 0.8 mm corner radius, 3.97 mm thickness, ISO size 09 and an 80° lead/approach angle, all of which affect edge strength and holder selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 GT9530 Wendeplatten - Tungaloy
Efficient finishing and extended tool life result from the combination of the wear-resistant GT9530 coating and a 0.8 mm nose radius; ISO compatibility allows rapid insert changes for smooth production. Order the CCMT09T308 insert directly via Metav Werkzeuge or consult our specialists for application support. CCMT09T308 GT9530 CCMT Turning Insert — Coated Cermet, 0.8 mm Nose Radius (Tungaloy) A CCMT09T308 GT9530 indexable turning insert engineered for finishing and light general turning of steel where surface quality and longer tool life are required. ISO rhombic turning insert CCMT 09T308 Coated cermet grade GT9530 for steel 0.8 mm nose radius for fine surface finish 7° clearance angle; with cylindrical hole and countersink Consistent finishing and extended tool life The insert combines a coated cermet cutting surface with a tool geometry that favours stable finishing passes. The GT9530 grade is a wear-resistant formulation intended for steel machining under steady conditions, delivering improved service life and a finer machined surface. A 0.8 mm nose radius reduces scallop height while maintaining edge strength, making the insert well suited to finishing and light universal turning where consistent part quality matters. Predictable ISO compatibility for quick tool changes Designed to ISO form and dimension standards, the insert ensures interchangeability across compliant tooling systems. The CCMT09T308 designation clarifies shape, size and tolerance class so matching a suitable external holder is straightforward: form, relief angle, attachment and thickness determine fit. This standardisation reduces set-up time and supports reproducible results in series production, improving process efficiency and machine uptime. Application focus: steel finishing and stable cutting conditions With a single-sided chipbreaker and a geometry optimised for stability, the insert excels in finishing or light turning of steels where surface integrity is a priority. The coated cermet substrate offers a balance between wear resistance and reproducible edge behaviour, which translates into fewer interruptions for insert changes and more consistent part tolerances. Choosing this grade supports a predictable cost-per-part in stable machining contexts. Mounting and operational details for dependable results The insert is supplied in a rhombic form with a 3.97 mm plate thickness, a 7° clearance angle and an 80° included angle; the fixing features include a cylindrical hole with a one-sided countersink (40°–60°), which assists secure clamping and accurate seating in compatible holders. Correct clamping torque and the use of matching screws and back-up pads are essential to preserve the cutting edge and avoid variation in cutting conditions during longer runs. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and to order genuine Tungaloy turning inserts like the CCMT09T308 GT9530 Technical Data Item number: 6998302 SKU: 6998302-Tungaloy Manufacturer SKU: TUN6998302 Brand: Tungaloy Article name: CCMT09T308 GT9530 Tungaloy insert Facts Nose radius: 0.8 mm Relief angle: 7° Thickness: 3.97 mm Included angle: 80° Insert size: 09 Special features Coating / grade: GT9530 Cutting material: coated cermet Substrate material: cemented carbide Shape: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Series: ISO turning inserts FAQ Is this insert compatible with standard CCMT holders? Compatibility follows ISO form and size; the CCMT09T308 insert fits holders designed for the CCMT 09T308 form when the holder matches form, clearance angle, tolerance class and thickness. Which materials is the GT9530 grade best suited for? The GT9530 coated cermet is optimised for steel machining in finishing to light universal operations, offering wear resistance and good surface finish under stable cutting conditions. How does the 0.8 mm radius affect surface quality? A 0.8 mm nose radius reduces scallop height and improves surface finish while retaining sufficient edge strength for finishing passes and lighter turning cuts. What fixing features does the insert have for secure clamping? The insert includes a cylindrical hole with a one-sided countersink (40°–60°) to ensure accurate seating and reliable clamping in suitable holders. Can this insert be used for roughing operations? This grade and geometry are designed primarily for finishing and light general turning; for heavy roughing, consider inserts with larger radii and more robust chip control designed for higher material removal rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 GT9530 Wendeplatten - Tungaloy
Benefit from a combination of precise finishing performance and reliable wear resistance thanks to the GT9530 coated cermet and the 0.8 mm corner radius; its ISO compatibility ensures predictable seating and easy replacement. Order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. CCMT09T308 GT9530 Tungaloy turning insert — ISO rhombic insert for finishing and light universal turning The CCMT09T308 GT9530 Tungaloy turning insert is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for fine finishing and stable machining conditions. Coated cermet grade GT9530 Rhombic ISO insert, 09 size 0.8 mm corner radius, fine finishing Cylindrical hole with 40°–60° countersink Enhanced surface quality through coated cermet technology The grade supplied is a coated cermet that combines ceramic hardness with metal toughness to deliver improved wear resistance and consistent surface finish during finishing operations. In practice this means fewer interruptions for rework and a reduced need for secondary polishing when machining steel under stable set-ups. The insert’s fine edge geometry supports close tolerances and helps maintain a consistent component appearance over longer runs, contributing to a more efficient production workflow and lower overall tooling costs. Predictable seating and simple replacement for steady production Manufactured to ISO-standard dimensions, the insert’s rhombic shape (size 09) and specified 7° relief angle provide repeatable seating in compatible holders; the secure fit is further supported by the cylindrical hole with a single-side countersink. These controlled dimensions reduce variability between tool changes and make tool offsets more reliable. For workshops aiming to maintain process stability, this predictability translates into shorter set-up times, fewer machine stops and improved first-pass yield. Application-focused design for finishing and light general-purpose turning Equipped with a one-sided chipbreaker and a 0.8 mm corner radius, the insert is tailored to finishing and light universal turning where surface quality and tool life are priorities. The GT9530 grade performs well in steady, rigid conditions, offering good edge stability and longer intervals between indexings. When used as part of a system—indexable insert, suitable external holder or boring bar, and correct clamping—the result is a dependable solution for workshops that require consistent results on turned steel components. For detailed cutting data, compatibility checks or to request item TUN6998292 from Metav Werkzeuge, get in touch with our team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice on Tungaloy turning solutions. Technical data Article number: 6998292 Manufacturer SKU: TUN6998292 SKU: 6998292-Tungaloy Model series: ISO turning indexable inserts Facts Radius: 0.8 mm Relief angle: 7° Included angle: 80° Thickness: 3.97 mm Size: 09 Special features Grade: GT9530, coated cermet Chipbreaker: one-sided Shape: rhombic Hole: cylindrical with single-side countersink 40°–60° Application: external and internal turning; finishing to light universal use Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The CCMT09T308 GT9530 Tungaloy turning insert is designed primarily for steel, offering good surface finish and longer tool life in stable machining conditions. Can this insert be used for internal turning as well as external turning? Yes, the ISO rhombic geometry and hole-style clamping make the CCMT09T308 GT9530 suitable for both external and internal turning when paired with an appropriate holder. What does the GT9530 grade provide compared with standard carbide grades? The GT9530 coated cermet focuses on wear resistance and surface quality for finishing operations, providing a finer edge and extended intervals between indexings compared with some general-purpose carbide grades. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius helps produce a better surface finish and reduces the risk of edge chipping during fine finishing, making it well suited to components with tight tolerance and visible surfaces. Which item number should be referenced when ordering or checking compatibility? Refer to Tungaloy item number 6998292 or manufacturer SKU TUN6998292 when enquiring about the CCMT09T308 GT9530 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a coated cermet GT9530 grade and a 0.8 mm corner radius for improved surface finish and extended tool life in stable turning operations. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. CCMT09T308 GT9530 CCMT indexable insert, coated cermet, for turning — Tungaloy The CCMT09T308 GT9530 is a rhombic ISO indexable insert for finishing and light general-purpose turning, designed for stable conditions and high surface-quality demands Coated cermet grade GT9530 for long tool life Rhombic ISO CCMT geometry for versatile turning 0.8 mm corner radius for fine surface finish Central hole with 40°–60° countersink for secure clamping Consistent surface finish and longer tool life The coated GT9530 cermet composition is engineered for finishing and light universal turning of steel where surface quality and extended tool life are priorities. With a 0.8 mm corner radius the insert produces a fine surface while maintaining edge strength; this radius balances minimal cutting forces with repeatable dimensional results. The coating enhances wear resistance under steady machining conditions, reducing the frequency of insert changes and contributing to a smoother production flow. For shops aiming to lower downtime and maintain consistent part quality, the GT9530 grade delivers predictable performance on finishing passes. Secure clamping and ISO compatibility for reliable processes Compatibility with ISO CCMT holders is determined by shape, relief angle, tolerance class, clamping method, size and thickness; this insert conforms to those ISO parameters. The rhombic form and the central cylindrical hole with a one‑sided countersink (40°–60°) ensure secure mechanical clamping and repeatable seating in a wide range of external holders and boring bars. The 80° included angle and 7° clearance provide geometric stability that supports accurate positioning and reduces chatter risk when set up correctly, helping to maintain tight tolerances in serial production. Controlled chip formation and practical application guidance This insert features a single‑sided chipbreaker, optimised for controlled chip formation in finishing and light turning tasks. The chipbreaker and coated substrate are chosen to work best under stable set‑ups and consistent feed conditions; selecting a matching chipbreaker and grade based on the workpiece material and machine rigidity is essential. For steel applications, the combination of a coated cermet cutting edge and moderate corner radius improves surface appearance and can lengthen tool life compared with uncoated grades, provided cutting parameters and coolant strategies are adapted to the machining context. Contact Metav Werkzeuge for tailored application advice, availability and to discuss the suitability of Tungaloy CCMT09T308 GT9530 inserts for specific production requirements — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Manufacturer article number: 6998296 SKU: 6998296-Tungaloy Manufacturer SKU: TUN6998296 Brand: Tungaloy Model series: ISO indexable turning inserts Material: coated cermet Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Size designation: 09 Included angle: 80° Relief/clearance angle: 7° Countersink angle: 40°–60° Special features Coating / grade: GT9530 Geometry: rhombic (CCMT) Hole: with hole; cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: turning (external and internal) Compatibility note: ISO-conforming; compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What machining tasks suit this insert best? The CCMT09T308 GT9530 Tungaloy indexable insert (SKU 6998296-Tungaloy) is aimed at external and internal turning where finishing or light universal turning is required; it performs best under stable workholding and consistent cutting conditions. Which materials is the GT9530 grade intended for? GT9530 is a wear‑resistant coated cermet grade engineered primarily for steel applications where a good surface finish and extended tool life are desired during finishing passes. How is the insert fixed in the toolholder? The insert uses a central cylindrical hole with a one‑sided countersink (40°–60°) for secure seating; when combined with ISO CCMT‑compatible holders and the correct clamping set, the design ensures repeatable positioning and stable clamping. Which geometric details are important for setup? Key geometry points are the rhombic CCMT form, an 80° included angle, 7° relief and a 0.8 mm corner radius; these govern cutting direction, edge strength and the achievable surface finish, and should be considered when selecting feeds and depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 GT9530 Wendeplatten - Tungaloy
Combining the GT9530 coated cermet grade with the ISO CCMT09T308 rhombic form and a 0.8 mm corner radius provides reliable finishing, extended tool life and predictable chip control — ideal for stable turning operations. Order the CCMT09T308 directly via Metav Werkzeuge or request application advice from our consultants. CCMT09T308 GT9530 — Turning insert (Tungaloy), coated cermet, 0.8 mm radius CCMT09T308 GT9530 is an ISO rhombic insert designed for finishing and light general turning of steel under stable machining conditions Coated cermet grade GT9530 for finishing ISO CCMT 09T308 rhombic geometry 0.8 mm corner radius for fine surface quality Single-sided chipbreaker for stable cuts Achieve consistent surface quality with a cermet grade tailored for finishing The GT9530 coated cermet is formulated to deliver a pronounced improvement in surface finish and wear resistance during finishing passes. Cermet combines ceramic hardness with metallic toughness, which reduces built-up edge and produces smoother part surfaces compared with conventional carbides. In practice, the grade supports longer tool intervals in steady setups, meaning fewer insert changes and more productive machine time. This is particularly relevant where a consistently fine finish on steel is required. Predictable chip behaviour and secure clamping for stable turning The rhombic CCMT shape, paired with a single-sided chipbreaker, promotes controlled chip formation and evacuation in finishing cuts. The insert’s 0.8 mm corner radius reduces corner stress while preserving edge strength, helping to avoid vibration and irregular tool wear. Compatibility with toolholders depends on form, relief angle, tolerance class, attachment and thickness; the standardised ISO format ensures straightforward integration into existing tool systems and predictable clamping performance. Broadened application scope while maintaining process efficiency Designed for turning, this grade suits light general machining through to high-quality finishing under stable conditions. The coated substrate improves resistance to abrasive and adhesive wear, which extends productive cycles and reduces unplanned stoppages. Selecting the appropriate chipbreaker and the GT9530 grade helps to balance surface quality and tool life, leading to measurable savings in throughput and tool management without sacrificing precision. Easy system integration and inventory clarity for production planning As an ISO-series insert, the CCMT09T308 fits common insert carriers when the holder parameters match the insert’s form, 7° clearance, size and thickness (3.97 mm). The insert includes a cylindrical hole with a single-sided countersink (40°–60°) to suit standard clamping sets and replacement screws. Standardised dimensions and clear grade designation simplify stocking and make it easier to specify the correct insert for repeatable, reproducible results on turned components. For stock availability, application-specific selection or to discuss suitability of the Tungaloy GT9530 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and fast supply. Technical data Article number: 6998306 SKU: 6998306-Tungaloy Manufacturer SKU: TUN6998306 Model series: ISO turning inserts Material: cemented carbide Facts Insert designation: CCMT09T308 Corner radius: 0.8 mm Thickness: 3.97 mm Relief/clearance angle: 7° Included angle: 80° Size: 09 Hole: with hole Special features Grade: GT9530 (coated cermet) Chipbreaker: single-sided Shape: rhombic Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning (finishing to light general machining of steel) Compatibility: ISO holders and standard clamping sets System components: ISO insert, suitable external holder or boring bar, support/clamping kit and spare screws FAQ Which materials can be machined with this insert? The CCMT09T308 GT9530 Tungaloy insert (SKU 6998306-Tungaloy) is specified for finishing and light general turning of steel, with the GT9530 cermet delivering improved surface quality and wear resistance under stable cutting conditions. How does the geometry affect holder compatibility? Compatibility is determined by the insert form, relief angle (7°), tolerance class, attachment method, size and thickness; the ISO CCMT format facilitates fitting to standard external holders and boring bars when the holder matches these parameters. What surface finish improvements are typical? Thanks to the GT9530 coated cermet and the 0.8 mm corner radius, the insert provides finer finishes and reduced built-up edge compared with many uncoated grades, supporting consistent component quality in finishing operations. Is this insert indexable and suitable for multi-edge use? The CCMT09T308 is an indexable ISO insert designed for rotation/indexing within compatible holders; exact indexing practice depends on holder design and recommended clamping procedure. How should the chipbreaker and grade be selected for different operations? Choose the chipbreaker and the GT9530 grade to match workpiece material, cutting parameters and machine stability; the single-sided chipbreaker here favours stable finishing cuts and controllable chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 H13A Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product details indexable inserts CCMT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308KMH13A-SANDVIK Data/ Figures: ISO-Code: CCMT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-09T308-H13A-Sandvik 40END
CCMT 09T308 H13A Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts CCMT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308KRH13A-SANDVIK ISO-Code: CCMT09T308 Grade: H13A Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-09T308-H13A-Sandvik 40END
CCMT 09T308 IB55 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Technical data indexable inserts CCMT 09T308 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T308TIB55 Figures for the tool: ISO-Code: CCMT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: IB55 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CBN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-09T308-IB55-ISCAR 40END
CCMT 09T308 IC20 Indexable Insert - ISCAR
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Specifications CCMT 09T308 inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T308-14IC20 Figures for the tool: ISO-Code: CCMT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING UNCOATED Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-09T308-IC20-ISCAR 40END
CCMT 09T308 IC20N Indexable Insert - ISCAR
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing directly by post. Design details for CCMT 09T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T308IC20N Facts for the tool: ISO-Code: CCMT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: IC20N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-09T308-IC20N-ISCAR 40END
CCMT 09T308 IC428 Indexable Insert - ISCAR
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Detail specifications CCMT 09T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T308-14IC428 Series: TURNING CVD ISO-Code: CCMT09T308 Grade: IC428 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-09T308-IC428-ISCAR 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com