Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CNGG 120402 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, a sharp uncoated carbide grade for clean surfaces, and a double-sided chipbreaker for economical use; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CNGG 120402 TH10 Turning insert (ISO 120402) — Tungaloy The CNGG120402 TH10 insert is an ISO-standard rhomboid indexable insert for turning, designed for economical, low-force machining of non-ferrous materials and other applications requiring a clean surface finish. ISO-standard compatibility Sharp uncoated carbide grade TH10 Double-sided chipbreaker for economy Cylindrical hole for secure clamping Reliable fit and straightforward integration for workshop use The ISO-standard design of this rhomboid insert ensures predictable compatibility with matching holders when form, relief angle, tolerance class, clamping method, size and thickness are observed. The cylindrical hole and standardised geometry simplify fixture selection and replacement, reducing set-up time and streamlining inventory management. For production environments where repeatability matters, the standardised format supports consistent seating and repeatable orientation in both external and internal turning operations. Low cutting forces and improved surface quality with TH10 The uncoated TH10 grade is a sharp, universal carbide developed for non-ferrous materials and processes that benefit from a clean cutting edge. Thanks to the sharp cutting edge and the small 0.2 mm corner radius, the insert promotes reduced cutting forces and finer finishes, especially on softer alloys and non-ferrous workpieces. The result is efficient material removal with minimal burr formation and less need for subsequent finishing, supporting a smoother production flow. Economic use and extended service life through reversible design Featuring a double-sided chipbreaker, the insert offers two usable cutting edges per side, effectively multiplying usable edges and lowering tooling costs per part. The uncoated carbide substrate delivers reliable edge sharpness where coatings would not be advantageous, and the rhomboid form factor allows economical indexing. Combined with the 4.76 mm thickness and robust seat contact provided by the 80° cutting angle, the geometry supports stable cutting for general turning tasks while keeping tool change frequency low. Practical handling and selection guidance for best results The insert has a 0° relief angle, which must be matched to an appropriate holder geometry to secure the intended clearance and rake behaviour. Choosing the correct chipbreaker variant and the TH10 grade helps to optimise chip control and surface integrity for the intended material. For most standard turning applications, select a compatible ISO holder that accommodates the rhomboid shape and the cylindrical mounting hole to ensure secure clamping and repeatable performance. Contact Metav Werkzeuge for tailored advice on holder compatibility and to secure genuine Tungaloy inserts for reliable production results; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6801855 Manufacturer SKU: TUN6801855 SKU: 6801855-Tungaloy Model series: ISO turning inserts Material: carbide Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 80° Relief angle: 0° ISO code: 120402 Special features Shape: rhomboid Hole: cylindrical hole Chipbreaker: double-sided Grade: TH10 (uncoated carbide) Application: turning (external and internal) FAQ Which materials are best processed with this insert? The TH10 uncoated carbide grade is intended primarily for non-ferrous materials and operations where a sharp edge supports low cutting forces and a clean surface finish; the insert is suitable for a broad range of softer alloys. Is the insert reversible and how many cutting edges are usable? Yes, the rhomboid geometry with a double-sided chipbreaker allows multiple indexing positions; this design extends usable life by providing several effective cutting edges before replacement is needed. How does the 0° relief angle affect holder choice? A 0° relief angle requires selection of a holder designed to provide the required clearance and to match rake and seat geometry; correct holder matching ensures stable cutting and repeatable seating. Does the insert have a coating? This product is supplied as uncoated carbide in the TH10 grade, chosen to maintain a sharp cutting edge where coatings are not beneficial for the process. Which chipbreaker should be selected for optimal performance? The supplied double-sided chipbreaker provides good general-purpose chip control for non-ferrous turning; choose the exact chipbreaker and grade based on material, feed and stability to balance chip shape and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 -SGF 1205 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics inserts CNGG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNGG120404-SGF1205-SANDVIK ISO-Code: CNGG120404 Grade: 1205 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: -SGF Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNGG-120404-1205-Sandvik 40END
CNGG 120404 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of wear resistance, edge stability and ISO compatibility to maintain productive turning cycles; the GH110 grade and reversible design reduce tooling costs while sustaining surface quality. Order genuine stock directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CNGG120404 GH110 — ISO rhombic turning insert for turning, Tungaloy The CNGG120404 GH110 is an ISO rhombic indexable insert designed for external and internal turning applications, with a 0.4 mm nose radius and a double-sided chipbreaker. ISO rhombic insert CNGG120404 GH110 Tungaloy carbide grade 0.4 mm nose radius for fine profiling Double-sided chipbreaker, cylindrical hole Consistent edge life through optimised grade technology The GH110 grade, developed by Tungaloy, combines wear resistance and toughness to preserve cutting-edge geometry under varying cutting conditions. This balance reduces flank wear and maintains dimensional stability over longer tool cycles, which translates into fewer indexings and lower tooling costs per part. The use of carbide as the base material ensures thermal and mechanical stability at standard turning feeds and speeds, and the double-sided design provides two usable edges, improving overall cost-efficiency. Plug-and-produce compatibility for secure clamping and repeatability Compatibility with toolholders follows ISO conventions: shape, relief angle, tolerance class, clamping method, size and thickness determine fit. The rhombic form with an 80° included angle and a 0° relief angle offers flexible approach angles for profiling and general turning. The insert’s cylindrical hole and standard thickness of 4.76 mm support secure mounting in compatible external holders or boring bars, while the 12 mm size makes the geometry predictable in common ISO toolholder systems for immediate integration into existing setups. Process reliability and practical shop-floor advantages A double-sided chipbreaker gives reproducible chip control for many turning tasks; the reversible nature of the insert halves the consumable rate per edge compared with single-sided types. The modest 0.4 mm nose radius is suited to fine profiles and moderate-strength finishing passes, supporting consistent surface quality. For system setup, combine the insert with a matching holder, shim/clamping set and retaining screw to guarantee repeatable clamping force. If clarification on selection or suitability for a specific workpiece material is required, the Metav Werkzeuge technical team is available to advise on the optimal chipbreaker and grade choice for the intended operation. Contact Metav Werkzeuge for expert application advice and to request genuine Tungaloy GH110 CNGG120404 turning inserts to secure reliable, productive turning results Technical data Article number: 6801864 Manufacturer SKU: TUN6801864 Item label: CNGG120404 GH110 Tungaloy insert Model series: ISO-indexable turning inserts Material: Carbide Brand: Tungaloy Facts Thickness: 4.76 mm Size: 12 Nose radius: 0.4 mm Included angle: 80° Clearance angle: 0° Hole: with cylindrical hole Special features Double-sided chipbreaker ISO rhombic form CNGG Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness Intended application: Turning System: insert + holder + shim/clamping set + retaining screw Grade: GH110 (Tungaloy grade) Carbide material Reversible cutting edges FAQ Which applications are best suited to this insert? The CNGG120404 GH110 insert is intended for turning operations where a balance of wear resistance and toughness is required; select the chipbreaker and cutting data according to the specific workpiece material. How is the insert secured in a holder? Compatibility is ensured by matching the insert form, clearance angle, tolerance class, clamping method, size and thickness; the CNGG120404 uses a cylindrical hole for positive clamping in compatible ISO toolholders. Can the insert be indexed to use the second cutting edge? Yes, the insert has a double-sided chipbreaker and is reversible, allowing the second edge to be used to extend effective tool life and reduce consumable costs. What are the key geometry values to note for tooling setup? Key values are a 0.4 mm nose radius and an 80° included angle with a 0° relief angle; the insert thickness is 4.76 mm and the nominal size is 12. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of reliable edge stability, balanced wear resistance and ISO compatibility for continuous, productive turning operations. Order the CNGG120404 GH110 indexable insert directly via Metav Werkzeuge or consult the technical team for selection advice. CNGG120404 GH110 indexable insert for turning — Tungaloy CNGG120404 GH110 is an ISO-format rhombic indexable insert designed for a wide range of turning applications, combining a wear-resistant carbide grade with a secure clamping concept for efficient outer and internal turning. ISO-compliant rhombic insert GH110 carbide grade: wear and toughness Double-sided chipbreaker for turning Cylindrical hole for secure clamping Increased productivity through balanced grade and edge stability The GH110 grade from Tungaloy offers a balanced combination of wear resistance and toughness, optimised to complement the insert geometry and cutting-edge stability. This balance reduces the frequency of tool changes and interrupts, which directly improves cycle time and lowers unit machining cost. As an indexable insert in the ISO turning family, the plate supports predictable toollife and consistent surface finish, helping to maintain throughput under varying cutting conditions while allowing straightforward rotation or replacement when wear occurs. Precise geometry for reliable machining results The plate’s rhombic form with an 80° approach angle and a 0.4 mm corner radius provides a versatile cutting edge suitable for finishing and light roughing. A 0° clearance angle and a thickness of 4.76 mm ensure rigidity in the clamping seat, while the 12 mm nominal size matches standard ISO holders. The insert is double-sided, allowing reversible use of the cutting edges, and features a cylindrical hole for positive fastening in compatible tool holders. These geometric details translate into improved repeatability and a clear guideline for selecting compatible holders — form, clearance, tolerance class, fastening and size determine fit. Application guidance and process security Intended for turning, the insert works effectively for both external and internal operations when the correct chipbreaker and cutting parameters are chosen. The double-sided chipbreaker provides controlled chip formation under a range of conditions, lowering the risk of built-up edge and stabilising the cut. For optimal results, match the chipbreaker style and grade to workpiece material, machining type and assembly stiffness; this approach preserves the cutting edge and ensures consistent performance. If further technical data or tailored recommendations are required, Metav Werkzeuge’s consultants can advise on parameter settings and holder compatibility to secure process reliability. Choose the GH110-grade CNGG120404 for stable, productive turning and contact Metav Werkzeuge for customised advice and rapid supply Technical Data Article number: 6801867 Manufacturer SKU: TUN6801867 Model series: ISO turning indexable inserts Material: Carbide Intended use: Turning Facts Corner radius: 0.4 mm Approach angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Special features Rhombic plate form Cylindrical hole for fastening Double-sided chipbreaker Carbide grade GH110 (Tungaloy) ISO-format compatibility Suitable for outer and inner turning FAQ What turning tasks is this insert designed for? The CNGG120404 GH110 Tungaloy indexable insert is designed for general turning tasks, covering both external and internal operations when the appropriate chipbreaker and cutting conditions are selected. Which geometric features are most relevant for holder selection? The insert’s rhombic shape, 80° approach angle, 0° clearance, 0.4 mm corner radius and 4.76 mm thickness are the primary dimensions to match the toolholder and ensure correct clamping and cutting geometry for the CNGG120404 GH110. How is the insert secured in the toolholder? Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the CNGG120404 GH110 uses a cylindrical hole for positive clamping in matching ISO holders. Is the cutting edge reversible and how is chip control achieved? The plate is double-sided, enabling use of both faces to extend service life, and the double-sided chipbreaker supports controlled chip formation across a range of turning conditions. What does the GH110 grade mean for machining performance? The GH110 carbide grade from Tungaloy provides a balance between wear resistance and toughness, which supports stable cutting-edge behaviour and consistent performance in varied turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of balanced wear resistance, stable chip control and straightforward compatibility with ISO toolholders for reliable turning processes; order or request tailored advice from Metav Werkzeuge when exact holder matching is required. CNGG 120404 GH110 indexable turning insert for Turning — Tungaloy A CNGG120404 GH110 indexable turning insert engineered for ISO-compliant external and internal turning operations, offering a compact rhombic form and robust carbide grade. *Rhombic 80° geometry for versatile turning *GH110 grade for wear resistance and toughness *Double-sided chipbreaker for repeatable performance *Cylindrical hole and 0.4 mm corner radius Consistent cutting performance for uninterrupted production The ISO-standard indexable insert delivers predictable performance in serial turning applications. Manufactured from carbide and specified in the GH110 Tungaloy grade, the insert balances wear resistance and toughness, which supports longer in-process life and fewer interruptions. Compatibility with a holder is governed by form, clearance angle, tolerance class, fastening, size and thickness — parameters that determine correct seating and clamping in ISO turning systems. The rhombic 80° geometry and modest 0.4 mm corner radius promote stable cutting forces, helping to maintain dimensional accuracy over tool life. Easy integration into existing ISO toolholders and setups Designed to match common ISO turning systems, the insert’s rhombic shape, 12 mm inscribed circle and 4.76 mm thickness allow simple replacement in compatible external holders or boring bars. The cylindrical hole supports standard clamping and securing mechanisms, while the specified 0° clearance provides a defined contact geometry that helps avoid ambiguous seating. These measurable characteristics reduce setup time and support reproducible positioning, enabling faster changeovers and predictable tool behaviour in multi-shift production environments. Stable chip control and surface consistency The built-in double-sided chipbreaker and the GH110 composition contribute to controlled chip formation and evacuation under a range of turning conditions. Stable chip control reduces risk of surface damage and tool interference, which in turn supports consistent workpiece finish from pass to pass. The combination of geometry and grade is selected to harmonise cutting-edge stability with sufficient toughness, improving process reliability and lowering the need for frequent insert changes — a clear efficiency gain for batch and continuous machining. Practical handling and selection guidance When selecting this insert, pair the CNGG120404 GH110 with a holder that matches the insert form, clearance and tolerance class to guarantee correct seating and optimal cutting angles. The rhombic format and 0.4 mm corner radius are suited to finishing and medium finishing passes where small radii improve surface integrity. The insert’s double-sided layout extends indexable life and reduces inventory needs. For material-specific recommendations or to verify holder compatibility, consult technical advisory resources or the dealer for tailored cutting data. Contact Metav Werkzeuge for expert advice on Tungaloy CNGG120404 GH110 indexable turning inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6801861 SKU: 6801861-Tungaloy Manufacturer SKU: TUN6801861 Designation: CNGG120404 GH110 Tungaloy-Wendeplatte Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Insert angle: 80° Relief/clearance angle: 0° ISO code: 120404 Special features Material: carbide Grade: GH110 (Tungaloy) Chipbreaker: double-sided Hole: cylindrical hole Shape: rhombic Application: turning (external and internal) Model series: ISO indexable turning inserts FAQ What operations is this insert recommended for? The CNGG120404 GH110 insert is designed for ISO-compliant external and internal turning operations where a rhombic geometry and a 0.4 mm corner radius support finishing and medium-finishing passes. How does the GH110 grade affect performance? GH110, as applied by Tungaloy, provides a balance of wear resistance and toughness that promotes stable cutting-edge life and reliable chip control in repeated turning cycles. Is the insert compatible with standard ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness; the CNGG120404 GH110 fits holders designed for ISO CNGG-type inserts with a 12 mm inscribed circle and 4.76 mm thickness. How should the insert be clamped? The cylindrical hole and ISO geometry allow standard screw or clamp systems used for rhombic indexable inserts; correct clamping relies on matching the holder’s tolerance class and seat geometry. Can the insert be indexed to use both faces? Yes, the insert is double-sided with a chipbreaker on each face, enabling indexing to the second cutting edge to extend usable life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 H13A Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications CNGG 120404 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNGG120404SGFH13A-SANDVIK ISO-Code: CNGG120404 Grade: H13A Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNGG-120404-H13A-Sandvik 40END
CNGG 120404 IC507 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product specifications CNGG 120404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120404-SFIC507 Data/ Figures: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC507 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNGG-120404-IC507-ISCAR 40END
CNGG 120404 IC907 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Specifications indexable inserts CNGG 120404 from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120404-SFIC907 Figures for the tool: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNGG-120404-IC907-ISCAR 40END
CNGG 120404 IC907 Indexable Insert - ISCAR
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing by post. Product specifications for indexable inserts CNGG 120404 from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120404-PPIC907 Figures for the tool: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CNGG-120404-IC907-ISCAR 40END
CNGG 120404 KC5010 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features CNGG 120404 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120404FS-KC5010-KENNAMETAL Facts for the tool: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CNGG-120404-KC5010-Kennametal 40END
CNGG 120404 KC5010 Indexable Insert - Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Technical data CNGG 120404 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120404LF-KC5010-KENNAMETAL Facts and Figures: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CNGG-120404-KC5010-Kennametal 40END
CNGG 120404 KC5025 Indexable Insert - Kennametal
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product details indexable inserts CNGG 120404 from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120404FS-KC5025-KENNAMETAL ISO-Code: CNGG120404 Grade: KC5025 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CNGG-120404-KC5025-Kennametal 40END
CNGG 120404 KCS10B Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for indexable inserts CNGG 120404 from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120404FS-KCS10B-KENNAMETAL Facts for the tool: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: KCS10B with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CNGG-120404-KCS10B-Kennametal 40END
CNGG 120404 KCU10 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for CNGG 120404 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120404LF-KCU10-KENNAMETAL Facts for the tool: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CNGG-120404-KCU10-Kennametal 40END
CNGG 120404 KCU10 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CNGG 120404 from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120404FS-KCU10-KENNAMETAL Data/ Figures: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CNGG-120404-KCU10-Kennametal 40END
CNGG 120404 KCU10B Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Features indexable inserts CNGG 120404 from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120404FS-KCU10B-KENNAMETAL Data & Figures: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CNGG-120404-KCU10B-Kennametal 40END
CNGG 120404 KCU25 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product details for CNGG 120404 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120404FS-KCU25-KENNAMETAL Facts / Figures: ISO-Code: CNGG120404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KCU25 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CNGG-120404-KCU25-Kennametal 40END
CNGG 120404 KS05F Wendeplatten - Tungaloy
Benefit from the combination of wear resistance, edge stability and ISO compatibility for consistently productive turning operations. Order the CNGG120404 KS05F Tungaloy indexable insert via Metav Werkzeuge or request application advice from our specialists. CNGG 120404 KS05F indexable insert for turning — Tungaloy, 80° rhombic, carbide CNGG 120404 KS05F is an ISO-standard rhombic indexable insert designed for external and internal turning where stable cutting edges and repeatable performance are required. ISO-standard CNGG geometry KS05F Tungaloy grade for wear resistance 80° rhombic shape with 0.4 mm radius Double-sided insert with cylindrical hole Reliable edge life and predictable process performance The insert combines the KS05F Tungaloy grade with a carbide substrate to deliver enhanced wear resistance and sustained cutting-edge stability during medium to heavy turning operations. The built-in double-sided chipbreaker promotes consistent chip control, reducing the need for frequent tool changes and supporting steady cycle times. Choosing a grade that balances toughness and hardness means the cutting edge resists chipping while maintaining acceptable flank wear progression, which translates directly into fewer interruptions on the shop floor and improved overall equipment effectiveness. Straightforward compatibility with ISO toolholder systems Engineered to the ISO code 120404, this rhombic insert fits standard CNGG toolholders when matching the form, relief angle, tolerance class, fastening method, size and thickness. The 80° geometry provides good shoulder strength and versatility for external and internal turning, while the cylindrical hole ensures secure clamping. The insert’s 4.76 mm thickness and 12 mm size offer a robust cutting edge, and the 0° relief angle supports a wide range of feeds and depths of cut. This clear ISO alignment simplifies procurement and inventory management across multiple machines and tool families. Practical handling and machining benefits for workshop use With a 0.4 mm radius, the insert offers a defined corner for reliable finishes and predictable toolpath outcomes when profiling or shoulder turning. The rhombic shape allows indexing of multiple cutting edges, extending life per insert and reducing tooling costs in high-volume runs. For operators less familiar with insert grades, the combination of Tungaloy’s engineered composition and the insert’s chip control features provides a forgiving cutting behaviour that aids consistent surface quality and reduces the need for constant parameter adjustments. When optimised cutting data are applied, productivity improves while part quality remains stable. Contact Metav Werkzeuge for tailored cutting-data recommendations and sample availability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6934781 SKU: 6934781-Tungaloy Manufacturer SKU: TUN6934781 ISO designation: CNGG120404 Model series: ISO-Drehwendeschneidplatten Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Insert angle: 80° Relief (rake) angle: 0° Hole: with cylindrical hole Special features Material: carbide Grade/coating: KS05F (Tungaloy) Chipbreaker: double-sided Shape: rhombic Application: turning (external and internal) Compatibility: ISO-standard insert — fit depends on holder form and tolerances FAQ What materials is this insert suited for? The CNGG120404 KS05F Tungaloy indexable insert is designed for general turning applications; the KS05F grade provides a balance of wear resistance and toughness suitable for a broad range of steels and mixed-material jobs. How does the chipbreaker affect machining? The double-sided chipbreaker on the CNGG120404 helps produce controlled chips and steady metal removal, improving surface quality and reducing cycle interruptions associated with poor chip formation. Can the insert be used in both external and internal turning? Yes, the rhombic geometry and 80° insert angle make the CNGG120404 appropriate for both external and internal turning when paired with the correct ISO-compatible holder. How many cutting edges are available per insert? The CNGG120404 is double-sided and indexable; rotating the insert exposes fresh cutting edges, which extends life per insert and reduces tooling consumption. Which specifications should be matched on the toolholder? Holder compatibility for the CNGG120404 depends on insert form, relief angle, tolerance class, fastening method, size and thickness; ensure the holder matches the ISO CNGG geometry and the 120404 code. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 NS520 Wendeplatten - Tungaloy
Take advantage of the NS520 cermet grade together with an 80° rhombic geometry and a 0.4 mm corner radius to achieve consistent surface finish and stable dimensional control in finish to light turning operations; order the insert directly via Metav Werkzeuge or request application advice from the consultants. CNGG 120404 NS520 — ISO turning insert for Turning by Tungaloy The CNGG120404 NS520 is an ISO-standard rhombic turning insert designed for finish to light turning of steel, optimised for surface quality and even wear. ISO rhombic 80° geometry NS520 cermet for fine finishing 0.4 mm corner radius Cylindrical-hole, holder compatible Deliver consistent surface quality with a cermet grade built for finishing The combination of the NS520 grade and a cermet substrate provides a cutting edge tailored to finish and light turning of steel, prioritising surface quality and dimensional accuracy. The cermet composition reduces built-up edge formation and promotes even wear, which helps maintain part tolerances over longer tool life. For applications where surface finish is critical, the insert’s geometry and grade contribute to reliable outcomes with reduced need for secondary finishing. Integrates smoothly into ISO turning systems for quick setup Specified as part of the ISO turning insert family, compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic shape with an 80° included angle and a cylindrical hole supports secure clamping in standard external holders and boring bars, while the 4.76 mm plate thickness provides robust seat support during cutting. Selecting a suitable holder and correct clamping torque ensures repeatable positioning and reduces vibration during operation. Improves process stability and productivity in light turning tasks For finish-oriented turning the insert’s properties reduce the need for conservative feeds and excessive rework. The NS520 cermet grade delivers a balance between edge strength and fine-grain wear characteristics, which can translate into more consistent cycle times and stable surface roughness. The double-sided chipbreaker design allows economical indexing when minor flank wear occurs, extending usable life while maintaining predictable performance across batches. Practical handling guidance and recommended applications With a 0.4 mm corner radius, 12 mm size and a 4.76 mm thickness, this insert is well suited to external and internal finishing passes where dimensional control matters. The rhombic geometry and double-sided chipbreaker are appropriate for steel turning operations that demand good surface integrity. When choosing a chipbreaker and grade, match the NS520 characteristics to workpiece alloy, feed and depth of cut to obtain the best compromise between tool life and surface finish; request detailed cutting data if needed for specific steels. Contact Metav Werkzeuge for delivery and application advice on the Tungaloy NS520 CNGG120404 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6801856 Manufacturer SKU: TUN6801856 SKU: 6801856-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: CNGG120404 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 80° Clearance angle: 0° Special features Rhombic insert form Cylindrical hole for clamping Double-sided chipbreaker Grade: NS520 (cermet / coated cermet) Material: carbide Application: Turning Compatible with ISO holders by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The CNGG120404 NS520 Tungaloy turning insert is intended primarily for steel finishing operations; the NS520 cermet grade focuses on surface quality and even wear in steel turning. How does the NS520 grade affect finishing performance? NS520 provides a fine-grain cermet characteristic that reduces built-up edge and promotes consistent wear, helping the CNGG120404 NS520 insert to deliver improved surface finish and dimensional control. Which holder types are compatible with this insert? Compatibility depends on holder form, clearance angle and clamping arrangement; the CNGG120404 NS520 insert uses a cylindrical hole and rhombic form to fit standard ISO external holders and appropriate boring bars. Is the insert reversible or indexable? The insert features a double-sided chipbreaker design, enabling economical indexing to extend usable life while maintaining cutting performance for finishing tasks. What are the key geometry values to check when selecting this insert? Key values include the 80° included angle, 0.4 mm corner radius, 12 mm size and 4.76 mm thickness; verify these against the holder and the intended turning operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 NS9530 Wendeplatten - Tungaloy
High-precision finishing and steady production are achievable with a sharp, uncoated cermet NS9530 grade combined with ISO compatibility and a compact 0.4 mm nose radius; the result is low cutting forces and superior surface finish for continuous turning of steel. Order the CNGG120404 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNGG 120404 NS9530 ISO turning insert for finishing — Tungaloy The CNGG120404 NS9530 is an ISO rhombic turning insert engineered for finishing steel, offering a sharp cutting edge and optimised chip control in continuous light-depth passes. Uncoated cermet grade NS9530 Sharp edge delivers fine surface finish 0.4 mm nose radius for precision turning ISO rhombic insert with 80° approach angle Precise finishing with lower cutting forces The combination of an uncoated cermet grade and a finely honed edge makes this insert particularly effective for finishing operations on steel. The NS9530 composition provides a balance between edge sharpness and wear resistance, resulting in low cutting forces and consistent surface quality during continuous cuts and small depth of cut conditions. For applications where surface integrity and dimensional tolerance matter, the fine nose radius and sharp cutting geometry reduce vibration and help achieve repeatable part quality. Predictable compatibility for streamlined tool changes Designed to the ISO turning insert standard, the indexable plate features a rhombic shape and an 80° geometry that align with common external holders and boring bars. Compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness, so using standardised holders ensures quick changeover and repeatable clamping performance. The standardised format supports lean toolroom practices by reducing setup time and simplifying inventory management for production environments. Stable mounting and controlled chip formation Mechanical stability is aided by a cylindrical hole for secure fastening and a plate thickness of 4.76 mm, which together provide reliable seating under cutting loads. The double-sided chipbreaker design offers two usable edges, extending the effective economy of the plate while maintaining consistent chip control and surface finish. The modest 0.4 mm nose radius suits fine finishing passes and delicate features, while the overall construction supports predictable tool life and safer machining cycles. For technical advice or availability of Tungaloy CNGG120404 NS9530 finishing inserts, contact Metav Werkzeuge for personalised guidance and order support Technical Data Article number: 6997792 SKU: 6997792-Tungaloy Manufacturer SKU: TUN6997792 Model series: ISO turning inserts ISO designation: CNGG120404 Shape: rhombic Grade: NS9530 Facts Thickness: 4.76 mm Size: 12 mm Nose radius: 0.4 mm Relief angle: 0° Approach angle: 80° Special features Uncoated cermet grade NS9530 Cylindrical hole for secure fastening Double-sided chipbreaker Suitable for finishing steel Compatible with ISO holders based on form and tolerance FAQ What material is the insert best suited for? The CNGG120404 NS9530 insert is a finishing grade designed specifically for steel, providing a sharp edge and low cutting forces for continuous turning operations. How many cutting edges does the plate offer? This indexable plate has a double-sided chipbreaker, giving two usable edges to extend tool economy before replacement. What are the key dimensional specifications to check for holder compatibility? Check size (12 mm), thickness (4.76 mm), relief angle (0°), approach angle (80°) and the cylindrical hole; these determine proper fit in ISO-compatible holders. Is the cutting material coated? The grade is an uncoated cermet (NS9530), optimised for finishing steel with a sharp cutting edge and good surface finish characteristics. What finish quality can be expected with a 0.4 mm nose radius? A 0.4 mm nose radius supports precise finishing passes and helps achieve fine surface finishes while maintaining low cutting forces and reduced vibration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of precise finishing, stable chip control and ISO compatibility to improve cycle times and surface quality; order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge team for technical matching. CNGG120404 NS9530 rhombic ISO turning insert, 0.4 mm radius — Tungaloy The CNGG120404 NS9530 is an ISO rhombic indexable insert for external and internal turning, designed as a finishing grade for continuous cuts and small depths of cut. *ISO rhombic insert CNGG120404 *NS9530 uncoated cermet finishing grade *0.4 mm corner radius for fine surface finish *Double-sided chipbreaker with cylindrical hole Consistent finishing with low cutting forces The insert is engineered as an uncoated cermet grade (NS9530) that delivers a sharp cutting edge and low cutting forces, which directly translates into improved machining stability during finishing operations. For turning applications this means fewer chatter issues and more consistent dimensional results, particularly when working with Stahl. The small 0.4 mm radius supports high-quality surface finishes on finishing passes while maintaining predictable tool life, reducing the need for frequent regrinding or replacement and contributing to overall productivity. Reliable fit and stable clamping for repeatable results Built to the ISO plate family, the insert’s rhombic geometry and 80° included angle ensure broad compatibility with common external holders and boring bars; compatibility is governed by form, clearance angle, tolerance class, attachment, size and thickness. The cylindrical hole and double-sided chipbreaker provide secure clamping and extended usable edges, which helps to lower tooling costs per component. With a plate thickness of 4.76 mm and standard ISO designation 120404, the component integrates into typical ISO-turning systems with minimal adaptation, ensuring repeatable set-ups and reduced machine downtime. Practical guidance for efficient turning operations This finishing grade insert is intended for continuous cuts and small depths of cut, making it suitable for fine external and internal profiling where surface integrity is critical. Select a holder and chipbreaker matched to the component material and stability of the set-up; the double-sided chip control assists in managing swarf to avoid surface damage and maintain cycle cleanliness. For uncertain material mixes or to optimise parameters for specific operations with Stahl, Metav Werkzeuge offers application advice to align insert grade, holder geometry and cutting data for best results. Contact Metav Werkzeuge for tailored technical advice on integrating the Tungaloy NS9530 finishing insert into existing tool systems and to arrange supply — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6997785 SKU: 6997785-Tungaloy Manufacturer SKU: TUN6997785 Manufacturer: Tungaloy Facts Angle: 80° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 12 mm ISO designation: 120404 Clearance angle: 0° Special features Material: Hartmetall Grade/coating: NS9530 uncoated cermet Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: Drehen Model series: ISO-Drehwendeschneidplatten FAQ What types of turning tasks suit this insert best? The CNGG120404 NS9530 insert is optimised for finishing operations in external and internal turning, delivering high surface quality and low cutting forces for continuous cuts. Can this insert be used for different steel alloys? Yes, the NS9530 grade is developed as a finishing sort for Stahl; selecting the correct chipbreaker and machining parameters is essential for best performance across different alloys. How does the double-sided chipbreaker affect tool life? The double-sided design provides additional usable edges and helps with chip control, which extends practical tool life and reduces replacement frequency for the insert. Which holder features ensure correct compatibility? Compatibility depends on form, clearance angle, tolerance class, attachment, size and thickness; ensure the holder matches the ISO form and the cylindrical hole clamping style of the insert. Is the insert ready to fit standard ISO turning systems? The insert follows ISO designation 120404 and fits standard ISO turning systems when paired with the appropriate holder, clamping set and screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 cermet finishing grade together with the ISO CNGG120404 form for consistent, high-quality turning results; the combination of 0° clearance and a tight 0.4 mm corner radius reduces cutting forces and improves surface finish. Order the CNGG120404 NS9530 Tungaloy insert directly via Metav Werkzeuge or contact the consultants for compatibility checks. CNGG 120404 NS9530 CNGG turning indexable insert by Tungaloy — ISO finishing insert, 80° geometry The CNGG120404 NS9530 is an ISO-standard indexable insert designed for precision external and internal turning, optimised for fine finishing on steel components. Cermet grade NS9530 for high surface quality ISO CNGG 120404 rhombic insert, 80° geometry 0° clearance, 0.4 mm corner radius, 4.76 mm thick Double-sided chipbreaker with cylindrical hole Consistent finishing with low cutting forces The uncoated cermet NS9530 is formulated for finishing operations on steel, delivering a high surface quality with low cutting forces during continuous cuts and small depth-of-cut applications. Cermet combines ceramic hardness with metallic toughness, which helps maintain a sharp cutting edge longer than many alternatives in fine-turning scenarios. This results in fewer passes to reach tolerance, reduced rework and a measurable improvement in cycle consistency. The grade is especially suitable where a fine surface and tight dimensional control are primary goals. Secure seating and reliable repeatability in the tool system Built to the ISO CNGG 120404 form, the insert's 80° geometry and rhombic shape allow secure clamping in standard holders. The 0° clearance and a 0.4 mm corner radius work together to lower radial cutting loads and improve stability when machining small stepovers or finishing shoulders. The insert is supplied with a cylindrical hole for positive locating and a double-sided chipbreaker that enables reversible use for cost-effective tool life. Where setup repeatability and predictable cutting behaviour are required, this geometry reduces the need for frequent adjustments and shortens machine downtime between tool changes. Practical application guidance for process reliability The insert is intended for turning applications on steel workpieces and is recommended for continuous cuts with small material removals. Compatibility with a holder depends on form, clearance angle, tolerance class, clamping method, size and thickness; pairing the insert with the correct external holder and clamping set ensures the expected performance. The system approach—insert, holder, backing pad and fasteners—supports rapid changeovers and consistent clamping force, which in turn improves repeatable part quality. For best results, select the chipbreaker and grade according to workpiece stability and machining parameters; this approach extends productive cutting time and supports efficient process planning. For specification matching, availability and technical advice on the Tungaloy CNGG120404 NS9530 finishing insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to arrange supply and holder compatibility checks Technical Data Article number: 6997787 SKU: 6997787-Tungaloy Manufacturer SKU: TUN6997787 Type designation: CNGG120404 NS9530 Tungaloy indexable insert Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle/size: 12 mm Included angle: 80° Clearance angle: 0° Hole: with hole (cylindrical) Chipbreaker: double-sided Special features Cutting material: uncoated cermet (NS9530) Application: turning, finishing on steel Insert form: rhombic Compatibility determined by form, clearance, tolerance class, clamping, size and thickness Suitable for continuous cuts and small depth-of-cut finishing operations FAQ What materials is this insert best suited for? The CNGG120404 NS9530 insert is specified as a finishing grade for steel; the NS9530 cermet composition is optimised for producing fine surface finishes on steel workpieces. Can the insert be used on both external and internal turning operations? Yes, the ISO CNGG 120404 form is suitable for both external and internal turning when paired with the appropriate external holder or boring bar. How does the 0° clearance affect cutting performance? A 0° clearance reduces the clearance angle to favour low cutting forces and a true finishing action; in practice this supports better surface finish and stable tool engagement during small-depth cuts. Is the insert reversible and cost-effective for production use? The double-sided chipbreaker allows the insert to be rotated for a second cutting edge, providing cost-effective usage and predictable performance across cycles. Which components are required to assemble a complete cutting system? A complete system consists of the ISO insert, a matching external holder or boring bar, a backing/locking pad or clamping set, and the appropriate fasteners—this ensures correct seating and reliable repeatability in production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 NS9530 Wendeplatten - Tungaloy
Combining precise finishing performance with ISO‑standard compatibility and economical use of cutting edges. Order the insert directly via Metav Werkzeuge or request advice from our consultants for process optimisation. CNGG 120404 NS9530 indexable turning insert, rhombic 80° geometry — Tungaloy CNGG 120404 NS9530 is an ISO‑standard indexable insert engineered for finishing turning of steel, offering a sharp edge and low cutting forces in continuous, light‑depth cuts Rhombic insert, 80° cutting geometry Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Double-sided chipbreaker, with hole Achieve superior surface finish with lower machining forces The combination of uncoated cermet grade NS9530 and a finely honed edge delivers a measurable improvement in surface quality during finishing passes. As a finishing grade for steel, the material promotes low cutting forces, which reduces tool‑holder vibrations and helps achieve consistent part tolerances. The small corner radius of 0.4 mm is designed for delicate profile work and tight radii, while the sharp edge geometry supports continuous cut conditions where surface integrity and dimensional accuracy are critical. This results in fewer rework operations and a more efficient production flow. Seamless integration into ISO toolholder systems for reliable setup Produced to ISO dimensions, the insert assures compatibility when the holder is matched by form, clearance, tolerance class, attachment method, size and thickness. The rhombic 80° geometry and 0° clearance angle allow straightforward seating in standard indexable turning holders and boring bars. The plate thickness of 4.76 mm and the standard 12 mm inscribed circle ensure predictable clamping behaviour and repeatable positioning. Clear reference to ISO conformity simplifies tool inventory management and reduces the time spent on tool selection and setup. Controlled chips and practical features for finishing processes The double‑sided chipbreaker improves chip formation in continuous cuts, aiding both process stability and surface finish. The insert is supplied with a cylindrical hole, enabling secure attachment and straightforward indexing; being double‑sided extends usable edge life before the insert must be replaced. Constructed from cemented carbide substrate and utilising a cermet grade, the insert is optimised for small depths of cut and steady feed conditions typical of fine turning operations, balancing tool life and finish quality without coated layers that can blunt a delicate edge. For application advice or to secure availability of the Tungaloy NS9530 finishing insert, contact Metav Werkzeuge for prompt technical support and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6997788 SKU: 6997788-Tungaloy Manufacturer SKU: TUN6997788 Article name: CNGG120404 NS9530 Tungaloy indexable insert Core measurements Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 80° Hole: with hole, cylindrical hole Materials & features Material: cemented carbide substrate Grade: NS9530, uncoated cermet, finishing for steel Chipbreaker: double-sided Suitable application: turning (finishing, continuous cuts) FAQ What is the primary application of this insert? The CNGG 120404 NS9530 Tungaloy indexable insert is designed for turning operations, specifically finishing passes on steel where a sharp edge and low cutting forces are required. Which geometry and dimensions define the insert? The insert features an 80° rhombic geometry, a 0.4 mm corner radius, 4.76 mm thickness and a 12 mm inscribed circle as specified for ISO CNGG 120404. How does chip control work with this grade? Chip control is provided by the double‑sided chipbreaker; the NS9530 uncoated cermet grade supports predictable chip formation in continuous, light‑depth cuts. Is the insert reversible and how is it fixed in the holder? Yes, the insert is double‑sided for two usable edges and is supplied with a cylindrical hole for secure fastening in compatible ISO toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a dedicated finishing grade, low cutting forces and ISO compatibility for reliable, repeatable turning operations; order the CNGG120404 NS9530 insert directly via Metav Werkzeuge or contact our consultants for specification support. CNGG 120404 NS9530 rhombic turning insert for finishing applications — Tungaloy The CNGG120404 NS9530 is an ISO‑designated rhombic turning insert intended for finishing steel, offering a sharp cutting edge and suitability for continuous cuts in light‑duty turning. ISO‑compatible rhombic insert Uncoated cermet NS9530 finishing grade 0.4 mm corner radius for fine finishing Double‑sided chipbreaker, with cylindrical hole Achieve consistently superior surface finish with low cutting forces The combination of an uncoated cermet matrix and the NS9530 designation is optimised for finishing steel, delivering a high surface finish while keeping cutting forces low. The ground, sharp edge reduces built‑up edge formation during continuous cuts and small depths of cut, so cycle times remain stable and rework is minimised. The built form supports operations where surface integrity and dimensional accuracy are priorities, translating insert properties into measurable process advantages. Reliable clamping and straightforward ISO compatibility Manufactured to an ISO geometry, the rhombic form ensures predictable seat and datum engagement with compatible holders. The geometry features a 4.76 mm thickness, an inscribed circle of 12 mm, and a 0° relief, which together determine stack‑up, rigidity and the accessible cutting depth. The insert is supplied with a cylindrical hole for positive locating and secure fastening; these measurable attributes simplify tool selection and reduce setup variability on production lines. Process recommendations for stable, economical turning The double‑sided chipbreaker design suits continuous turning and assists chip control when paired with appropriate coolant and a rigid toolholder. Use this insert in fine finishing passes with small feed rates to exploit its 0.4 mm radius for improved edge strength and surface quality. For consistent results, match the insert grade and chipbreaker to the workpiece and machining stability — choosing a stable holder and correct clamping torque reduces vibration and extends tool life, contributing to overall process economy. Contact Metav Werkzeuge for tailored cutting data, application advice or to request detailed drawings and compatibility checks for the CNGG120404 NS9530; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6997791 SKU: 6997791-Tungaloy Manufacturer SKU: TUN6997791 Model series: ISO turning inserts Material: carbide Facts ISO designation: CNGG120404 Size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 80° Special features Shape: rhombic Grade: NS9530 Cutting material type: uncoated cermet Chipbreaker: double‑sided Mounting: with hole Hole style: cylindrical Application: turning FAQ What materials is this insert best suited for? The CNGG120404 NS9530 insert is a finishing grade optimised for steel; its uncoated cermet chemistry and sharp cutting edge favour continuous turning operations on steel workpieces. How is the insert clamped and aligned? Alignment and clamping rely on the ISO rhombic datum and the cylindrical hole; the CNGG120404 designation ensures compatibility with holders designed for that ISO geometry and 12 mm inscribed circle. Can this insert be used for roughing? This grade and geometry are intended for finishing passes; the NS9530 finishing grade and 0.4 mm corner radius are not optimised for heavy roughing or interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com