Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CNGG 120404 S05F Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for CNGG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNGG120404SGFS05F-SANDVIK Facts and Figures: ISO-Code: CNGG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: S05F with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CNGG-120404-S05F-Sandvik 40END
CNGG 120404 S205 Indexable Insert - Sandvik
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Features indexable inserts CNGG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNGG120404SGFS205-SANDVIK Facts for the tool: ISO-Code: CNGG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: S205 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNGG-120404-S205-Sandvik 40END
CNGG 120404 SGF 1105 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features CNGG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNGG120404SGF1105-SANDVIK Facts and Figures: ISO-Code: CNGG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 1105 Chip Breaker: SGF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNGG-120404-1105-Sandvik 40END
CNGG 120404 SGF 1115 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product features for indexable inserts CNGG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNGG120404SGF1115-SANDVIK ISO-Code: CNGG120404 Grade: 1115 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: SGF Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNGG-120404-1115-Sandvik 40END
CNGG 120404 SGF 1125 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for CNGG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNGG120404SGF1125-SANDVIK Facts and Figures: ISO-Code: CNGG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1125 Chip Breaker: SGF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNGG-120404-1125-Sandvik 40END
CNGG 120404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated carbide cutting edge (TH10), a double-sided chipbreaker and ISO‑standard geometry for efficient turning of non‑ferrous components; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. CNGG 120404 TH10 rhomboid turning insert for Drehen — Tungaloy, uncoated carbide, 0.4 mm radius CNGG 120404 TH10 Tungaloy turning insert provides a compact, ISO‑conforming solution for external and internal turning where low cutting forces and clean surface generation are required ISO rhomboid insert, 12 mm size Uncoated carbide grade TH10 for low cutting forces Double-sided chipbreaker, cylindrical hole 0.4 mm corner radius, 0° clearance angle High-efficiency turning for non‑ferrous materials The rhomboid ISO insert delivers predictable performance in conventional turning. The uncoated carbide TH10 grade is engineered for applications with non‑ferrous materials and situations that benefit from a sharp, uncoated edge; this supports reduced cutting forces and contributes to a cleaner surface finish. The insert’s single cutting geometry reduces the need for excessive feed adjustments, which helps to maintain steady cycle times and consistent part quality on lathes and turning centres. Geometry and clamping: dependable fit and repeatable results Designed to ISO dimensions, the insert’s rhomboid form and tolerance class determine compatibility with corresponding holders and boring bars. The cylindrical hole and standard fixing ensure stable seating in the pocket, while the double‑sided chipbreaker allows reversal of the cutting edge for extended productivity. The 0° clearance angle and 0.4 mm corner radius balance edge strength and form accuracy, making the geometry suitable for finishing passes and for operations where delicate edge behaviour is advantageous. Choosing and integrating the insert into the tool system Selection should consider the workpiece material, machining strategy and machine rigidity. The insert forms part of a system that includes the ISO insert, suitable external holder or boring bar and correct clamping set. Because the grade is uncoated carbide, it is particularly useful where low adhesion and minimal built‑up edge are desired. For less experienced engineers, the indexable design simplifies inventory management and reduces downtime through easy rotation or replacement when the edge is worn. For precision turning tasks that prioritise low cutting forces and high surface quality, contact Metav Werkzeuge to discuss the suitability of the Tungaloy CNGG120404 TH10 insert and request tailored recommendations Technical data Article number: 6801858 Manufacturer SKU: TUN6801858 Brand: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Insert angle: 80° ISO designation: 120404 Special features Material: carbide Grade: TH10 (uncoated) Shape: rhomboid Chipbreaker: double‑sided Hole: with cylindrical hole Application: turning (Drehen) Series: ISO turning indexable inserts FAQ Is this insert suitable for aluminium and other non‑ferrous metals? Yes. The TH10 uncoated carbide grade is intended for non‑ferrous materials and supports low cutting forces and clean surface generation when used as a turning insert. Can the insert be used both externally and internally? Yes. The ISO rhomboid geometry and cylindrical hole allow mounting in compatible external holders and boring bars for both external and internal turning operations. How does the double‑sided chipbreaker affect productivity? The double‑sided chipbreaker enables the insert to be indexed to a fresh cutting edge, extending tool life and reducing tool change frequency for continuous production. What does the 0° clearance angle mean for machining? A 0° clearance angle indicates a neutral relief that, combined with a sharp uncoated edge, helps to reduce cutting forces while maintaining a defined cutting geometry for good surface finish. Which system components are required to use this ISO insert? The insert is part of a system comprising the ISO turning insert, a matching external holder or boring bar, a support/locking kit and replacement fixing screws compatible with the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a sharp TH10 carbide grade and a secure cylindrical‑hole mount for consistent, low‑force turning and clean surface results; order directly via Metav Werkzeuge or consult the team for compatibility checks. CNGG 120404 TH10 ISO turning indexable insert by Tungaloy The CNGG120404 TH10 is an ISO rhombic indexable insert designed for external and internal turning, providing a low cutting‑force uncoated carbide edge and double‑sided chipbreaker for dependable surface quality. ISO rhombic insert CNGG 120404 Uncoated carbide grade TH10 Double-sided chipbreaker for clean finishes Cylindrical-hole mounting, 0° relief Increased process efficiency through low cutting forces The rhombic indexable insert in TH10 grade is an economical choice for operations that prioritise reduced cutting resistance and improved surface finish when machining non‑ferrous and low‑force applications. The uncoated carbide edge supports smoother shearing, which often means lower spindle loads and extended tool life in light‑duty turning. Where cutting energy and heat generation must be kept down, this configuration enables more consistent cycle times and less frequent interruption for insert changes, supporting higher throughput on smaller batches. Secure clamping and ISO compatibility for reproducible results Manufactured to the ISO designation CNGG 120404, the insert’s form, tolerance and cylindrical hole ensure compatibility with standard external holders and boring bars. The 0° relief and the 80° lead geometry enable predictable seating and repeatable cutting geometry across sets, so toolmakers and operators can match holders and clamping kits with confidence. This deterministic compatibility reduces set‑up time and variances in part quality during serial production. Application suitability and handling advantages With a double‑sided chipbreaker and a 0.4 mm corner radius, the insert is tailored for turning operations where tidy chip formation and controlled cutting are required. The geometry supports both external and internal turning tasks, and the insert’s thickness and size yield stable contact and good support in the pocket. For workshops that process aluminium, brass and other non‑ferrous materials, the uncoated cutting edge helps to prevent built‑up edge and to maintain a clean surface without the need for aggressive coatings. Simple system integration and maintenance benefits The insert is part of a system comprising the ISO plate, matching holder or boring bar, support/clamping set and spare screws. As a double‑sided component, it offers cost‑effective indexing and reduces consumable changes per part produced. Clear specification of size, thickness and hole style simplifies spare‑parts management and ensures fast replacement in a production environment, supporting consistent quality with minimal downtime. Contact Metav Werkzeuge to discuss Tungaloy TH10 inserts, confirm holder compatibility or request a cutting data recommendation — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6801869 Manufacturer SKU: TUN6801869 SKU: 6801869-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNGG120404 Material: Hartmetall Grade: TH10 Application: Drehen Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Lead angle: 80° Relief angle: 0° Special features Rhombic plate form Cylindrical hole style Double-sided chipbreaker Uncoated carbide cutting edge Compatibility depends on form, relief, tolerance, fastening, size and thickness Typical use: external and internal turning System components: matching holder/boring bar, support/clamping set, spare screws FAQ What materials is this insert suitable for? The CNGG120404 TH10 Tungaloy indexable insert (SKU 6801869-Tungaloy) is optimised for non‑ferrous materials and applications that benefit from a sharp uncoated carbide edge and reduced cutting forces. Is the insert reversible or single‑use per edge? The CNGG120404 is double‑sided; each side can be indexed to provide two cutting edges, which enhances cost efficiency for turning operations. How is the insert fixed to the holder? This insert features a cylindrical hole for secure mounting; compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. Can the insert be used for both external and internal turning? Yes, the geometry and chipbreaker design suit both external and internal turning tasks when paired with the appropriate holder or boring bar. What are the key dimensional specifications to check before ordering? Verify size (12 mm), thickness (4.76 mm), corner radius (0.4 mm), lead angle (80°) and relief (0°) to ensure correct fit and function. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNGG 120404 TH10 Wendeplatten - Tungaloy
Take advantage of a proven ISO-compatible design combined with a sharp, uncoated carbide grade to reduce cutting forces and improve surface finish in general turning operations. Order the insert directly via Metav Werkzeuge or consult the team for holder compatibility and clamping recommendations. CNGG 120404 TH10 — Indexable turning insert for turning by Tungaloy CNGG120404 TH10 Tungaloy turning insert is an ISO-indexed, rhombic insert engineered for external and internal turning where low cutting forces and clean surfaces are required ISO-indexed CNGG geometry for broad compatibility Uncoated carbide TH10 for low cutting forces Rhombic shape with 80° approach angle 0.4 mm nose radius for fine surface finish Double-sided chipbreaker with cylindrical hole Consistent cutting with a sharp, universal grade The combination of an ISO-standard geometry and the TH10 uncoated carbide grade provides predictable cutting behaviour across a wide range of non-ferrous and delicate applications. The sharp edge reduces required cutting force, which helps to limit deflection on less rigid setups and supports a clean surface finish. Uncoated grades are especially suitable where adhesion or built-up edge risk must be minimised and where a defined cutting edge is preferred over coated alternatives. Geometry that supports precision and repeatability A 0.4 mm nose radius paired with the 80° approach angle and the rhombic plate form delivers a balance between profile strength and fine finishing capability. The specified nose radius directly influences surface roughness and allowable feed rates: a smaller radius helps achieve tighter finishes with lower feed, while the 80° geometry gives a reliable cutting direction for both facing and longitudinal turning. These features contribute to repeatable results when the rest of the machining system is appropriately selected. Secure mounting and system compatibility explained Compatibility with the toolholder is governed by the insert’s form, relief angle, tolerance class, fastening method, size and thickness; the presence of a cylindrical hole supports positive location and firm clamping. With a 4.76 mm thickness, the insert provides sufficient stability in standard external holders and boring bars when clamped correctly. The double-sided chipbreaker extends usable life by allowing indexation of the insert, helping maintain process uptime. Application suitability and chip control guidance The grade is intended as a sharp, universal solution for non-ferrous materials and for operations that benefit from a clean, uncoated cutting edge. The double-sided chipbreaker is designed to manage chips on a variety of workpiece materials provided the appropriate chipbreaker variant and cutting parameters are selected. For best results, choose a chipbreaker and grade that match the part material, machining strategy and machine-tool rigidity. Practical system approach for production stability An indexable insert performs best as part of a system: the insert, a matched external holder or boring bar, a support shim or clamp set and the correct fastening screw together determine the operational reliability. Ensuring the holder accepts the CNGG form and the specified clearance is essential; incorrect holder selection is a common source of vibration or poor surface finish. The ISO-series design simplifies holder selection by adhering to established geometric standards. Setup tips to reduce trial-and-error Select the TH10 grade and the double-sided chipbreaker when low cutting forces and clean finishes are priorities; for heavier interrupted cuts or harder materials, consider a different grade or a coated alternative. Check the holder’s tolerance class and ensure the clamping screw and underlay match the insert thickness. For further matching of holder geometry and process parameters, technical consultation is recommended to avoid unnecessary tool wear or poor surface results. Contact Metav Werkzeuge to confirm holder compatibility, request application advice and secure the correct CNGG 120404 TH10 inserts for productive turning operations Technical data Article number: 6801863 Manufacturer SKU: TUN6801863 SKU: 6801863-Tungaloy Designation: CNGG120404 TH10 Tungaloy insert Model series: ISO turning indexable inserts Material: carbide Dimensions & measurable data Plate size: 12 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Relief/clearance angle: 0° Approach angle: 80° Hole style: cylindrical hole Designs & special features Plate form: rhombic Chipbreaker: double-sided Grade/coating: TH10 uncoated carbide Application: turning (external and internal) Compatibility: holder fit depends on form, relief angle, tolerance, fastening, size and thickness FAQ Is this insert suitable for both external and internal turning? Yes. The CNGG120404 TH10 insert is designed for both external and internal turning when used with a compatible external holder or boring bar and the appropriate clamping set. Which materials are best machined with the TH10 grade? The TH10 uncoated carbide grade is optimised for non-ferrous materials and operations requiring low cutting forces and clean surfaces; it performs well where a sharp, uncoated edge is advantageous. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius helps achieve finer surface finishes at lower feeds and reduces the risk of workpiece indentation compared with larger radii; selection should match the intended feed rates and part tolerance. What determines whether the insert fits a specific holder? Fit is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; ensure the holder accepts the CNGG geometry and 4.76 mm plate thickness. Can the insert be indexed to use both sides? Yes. The insert is double-sided with a chipbreaker design that allows indexation to the second cutting edge, extending tool life and minimising downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120408 -SGF 1205 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for CNGG 120408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNGG120408-SGF1205-SANDVIK Facts and Figures: ISO-Code: CNGG120408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 1205 Chip Breaker: -SGF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNGG-120408-1205-Sandvik 40END
CNGG 120408 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard compatibility, GH110 Tungaloy wear resistance and a compact rhombic geometry for consistent turning results; order the insert directly via Metav Werkzeuge or request application advice from our consultants. CNGG120408 GH110 indexable insert for turning by Tungaloy — rhombic, 12 mm, with cylindrical hole The CNGG120408 GH110 is an ISO‑standard rhombic indexable insert designed for general external and internal turning, offering robust edge stability and straightforward interchangeability with matching holders. ISO-standard CNGG insert, 12 mm size GH110 Tungaloy grade for wear resistance Rhombic shape with 0° clearance angle Cylindrical through-hole and 0.8 mm corner radius Engineered for dependable turning performance The insert is built on a carbide substrate combined with the GH110 Tungaloy grade, providing a balance of wear resistance and edge toughness that translates into longer service life and stable surface finishes. In practice, this means fewer interruptions for regrinding or replacement and more predictable process control on the shop floor. The rhombic geometry and precise ground faces deliver consistent contact with the clamping system, which helps maintain repeatable cutting conditions and reduces variation between parts. Designed for secure mounting and system compatibility Manufactured to ISO dimensions, the insert’s form, clearance angle and tolerance class ensure compatibility with widely used external holders and boring bars. The presence of a cylindrical through-hole simplifies positive locating and clamping, while the specified 4.76 mm thickness and 12 mm size keep the insert stable under moderate cutting forces. Clear mechanical interfaces reduce set‑up time and enable rapid index changes, which is particularly valuable in mixed‑batch production where tool changes must be fast and reliable. Practical selection for varied turning tasks Equipped with a double-sided chipbreaker, the insert suits a range of turning operations; selecting the appropriate chipbreaker and the GH110 grade according to workpiece material and machining conditions optimises results. The geometry is appropriate for both external and internal turning cycles where a controlled chip flow and edge stability are required. For operators assessing options, the insert’s balanced properties make it a pragmatic choice where a combination of surface quality and tool life is sought. Shop-floor benefits and handling As an indexable solution, the insert contributes to efficient tool management and predictable downtime planning. The 0.8 mm corner radius offers a compromise between edge strength and achievable surface finish, while the standardised ISO form simplifies inventory and reduces the assortment of holders required. System assembly typically comprises the insert, a compatible outer holder or boring bar, a clamp plate or clamp set and replacement screws, enabling straightforward maintenance and quick turnarounds during production shifts. For demanding turning operations, select the Tungaloy GH110 CNGG120408 insert and contact Metav Werkzeuge for availability and tailored application advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6801879 Manufacturer SKU: TUN6801879 SKU: 6801879-Tungaloy Model series: ISO turning indexable inserts Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 80° Through-hole: cylindrical Special features Shape: rhombic Grade/coating: GH110 (Tungaloy) Chipbreaker: double-sided Substrate: carbide Intended application: turning Mounting: with cylindrical through-hole ISO designation: CNGG120408 Typical system components: outer holder, boring bar, clamp set, replacement screws FAQ What operations is this insert suitable for? The CNGG120408 GH110 Tungaloy indexable insert (SKU: 6801879-Tungaloy) is intended primarily for external and internal turning where a balance of wear resistance and edge stability is required. How does the GH110 grade affect tool life? The GH110 Tungaloy grade provides improved wear resistance and reliable edge behaviour, so the CNGG120408 insert typically yields longer effective cutting life compared with less wear‑resistant grades. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s ISO dimensions allow fitting to standard holders and boring bars designed for CNGG‑style inserts. Can this insert be used for interrupted cuts? The carbide substrate and GH110 grade of the CNGG120408 insert offer a compromise of toughness and wear resistance that can handle light to moderate interrupted cuts if the overall machining set‑up provides sufficient rigidity. What is the advantage of the cylindrical through‑hole? The cylindrical through‑hole in the CNGG120408 insert enables positive locating and stable clamping, which improves repeatability and helps maintain consistent cutting geometry across tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120408 GH110 Wendeplatten - Tungaloy
Benefit from the combination of GH110 wear resistance, a double-sided chipbreaker and full ISO compatibility for predictable, productive turning operations. Take advantage of the rhombic form and stable clamping to maintain surface quality and tool life. Order the insert via Metav Werkzeuge or consult the specialists for application support. CNGG 120408 GH110 – Tungaloy indexable insert for turning The CNGG 120408 GH110 is an ISO-standard indexable insert designed for external and internal turning, offering a balanced combination of wear resistance and edge stability for general turning tasks. ISO-standard rhombic insert CNGG 120408 GH110 Tungaloy grade for wear resistance Double-sided chipbreaker for versatile cutting Cylindrical hole and 0° clearance for stability Stable cutting performance through optimised grade and substrate The insert is produced in cemented carbide with the manufacturer’s GH110 grade, delivering a deliberate balance between hardness and toughness that supports consistent performance under varying cutting conditions. This material choice reduces flank wear and helps preserve the cutting edge across extended tool life, which translates into fewer indexings and reduced process interruptions. The combination of rhomboid geometry and the selected substrate promotes predictable chip formation and helps to maintain surface finish without frequent regrinding. Where cycle time and repeatability matter, the indexable insert offers measurable gains in productivity and process stability. ISO compatibility for straightforward holder integration As an ISO-specification insert, compatibility with a suitable toolholder depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness. The standardised dimensions simplify holder selection and spare-part logistics across production cells. The rhombic shape and a cylindrical central hole enable reliable clamping in matched holders; the 0° clearance reduces the need for special seat geometries. Clear reference to the ISO code helps machining planners ensure correct seating and torque values for the clamping screw, thereby avoiding uncertain fits. This alignment reduces setup time and contributes to reproducible machining results. Designed for repeatable chip control and operator confidence The double-sided chipbreaker and the moderate nose radius work together to control chip formation and evacuation, which is especially useful in mixed-material turning tasks. The insert’s geometry supports consistent cutting forces and enhances edge stability when interrupted cuts or variable feeds are required. The CNGG 120408 accommodates a range of turning strategies — from light finishing passes to more aggressive semi-finishing — while the central cylindrical hole ensures secure mounting and minimal movement under load. For production lines seeking a dependable balance of surface quality and tool life, this insert provides a pragmatic, application-oriented solution. Contact Metav Werkzeuge for application advice on the Tungaloy CNGG 120408 GH110 insert and current availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6801875 Manufacturer SKU: TUN6801875 SKU: 6801875-Tungaloy Facts Grade: GH110 (Tungaloy) Material: cemented carbide Insert designation: CNGG120408 Shape: rhombic Size: 12 mm Thickness: 4.76 mm Nose radius: 0.8 mm Clearance angle: 0° Lead angle: 80° Hole: cylindrical Special features Double-sided chipbreaker ISO indexable turning insert series Suitable for external and internal turning Tungaloy cutting grade tailored for wear resistance and edge stability FAQ What materials is this insert suited for? The GH110 grade is designed for general turning tasks; the Tungaloy CNGG 120408 insert performs well across a wide range of steels and common engineering materials due to its balanced wear resistance and toughness. How is the insert clamped in the holder? The insert features a cylindrical central hole and standard ISO dimensions; secure clamping is achieved with the corresponding holder, matching form and thickness to ensure stability. Can the insert be used for internal boring as well as external turning? Yes, the ISO rhombic form and double-sided chipbreaker make the insert suitable for both external and internal turning operations when paired with the appropriate holder. How does the double-sided chipbreaker improve process reliability? The double-sided chipbreaker promotes consistent chip formation and evacuation on both index positions, helping to maintain stable cutting forces and extend edge life under varying cutting conditions. Which identifier should be quoted when ordering replacement inserts? Use the designation CNGG120408 GH110 and the article number 6801875 or SKU 6801875-Tungaloy to ensure the correct item is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNGG 120408 H13A Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features inserts CNGG 120408 from Sandvik Brand: Sandvik Manufacturer Order Number: CNGG120408SGFH13A-SANDVIK Facts & Figures: ISO-Code: CNGG120408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNGG-120408-H13A-Sandvik 40END
CNGG 120408 IB22HC Indexable Insert - ISCAR
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Design details CNGG 120408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120408-M4HM-JIB22HC Data & Figures: ISO-Code: CNGG120408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: IB22HC with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING CBN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNGG-120408-IB22HC-ISCAR 40END
CNGG 120408 IB25HA Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Detail specifications CNGG 120408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120408-M4HFIB25HA Facts / Figures: ISO-Code: CNGG120408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IB25HA with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING CBN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNGG-120408-IB25HA-ISCAR 40END
CNGG 120408 IC07 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Performance features indexable inserts CNGG 120408 from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120408-PP-PIC07 Facts for the tool: ISO-Code: CNGG120408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC07 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING OTHER Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNGG-120408-IC07-ISCAR 40END
CNGG 120408 IC804 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product features for CNGG 120408 inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120408-PPIC804 Facts and Figures: ISO-Code: CNGG120408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC804 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CNGG-120408-IC804-ISCAR 40END
CNGG 120408 IC806 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts CNGG 120408 from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120408-PPIC806 Facts for the tool: ISO-Code: CNGG120408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CNGG-120408-IC806-ISCAR 40END
CNGG 120408 IC907 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts CNGG 120408 from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120408-TFIC907 Series: TURNING PVD ISO-Code: CNGG120408 Grade: IC907 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNGG-120408-IC907-ISCAR 40END
CNGG 120408 IC907 Indexable Insert - ISCAR
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us a sample insert or drawing by post Product details CNGG 120408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNGG120408-PPIC907 Figures for the tool: ISO-Code: CNGG120408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CNGG-120408-IC907-ISCAR 40END
CNGG 120408 KC5010 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features inserts CNGG 120408 from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120408LF-KC5010-KENNAMETAL ISO-Code: CNGG120408 Grade: KC5010 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CNGG-120408-KC5010-Kennametal 40END
CNGG 120408 KC5010 Indexable Insert - Kennametal
You couldn't find the right insert? Let us help you!► Send us a photo of your insert by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product details for indexable inserts CNGG 120408 from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120408FS-KC5010-KENNAMETAL Dataand Figures: ISO-Code: CNGG120408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CNGG-120408-KC5010-Kennametal 40END
CNGG 120408 KC730 Indexable Insert - Kennametal
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts CNGG 120408 from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120408LF-KC730-KENNAMETAL Figures for the tool: ISO-Code: CNGG120408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KC730 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CNGG-120408-KC730-Kennametal 40END
CNGG 120408 KCS10B Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features insert CNGG 120408 from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120408FS-KCS10B-KENNAMETAL ISO-Code: CNGG120408 Grade: KCS10B Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CNGG-120408-KCS10B-Kennametal 40END
CNGG 120408 KCU10 Indexable Insert - Kennametal
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Design details for indexable inserts CNGG 120408 from Kennametal Brand: Kennametal Manufacturer Order Number: CNGG120408LF-KCU10-KENNAMETAL Facts & Figures: ISO-Code: CNGG120408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CNGG-120408-KCU10-Kennametal 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com