Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CNMG 090402 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade and CNMG geometry for reliable wear resistance and consistent chip control; this insert supports stable to lightly interrupted turning of stainless steels while remaining compatible with ISO holders. Order the CNMG090402 T6215 Tungaloy insert directly via Metav Werkzeuge or consult their advisors for application guidance. CNMG090402 T6215 CNMG ISO 090402 — Tungaloy indexable insert for turning A CNMG090402 T6215 indexable turning insert engineered for external and internal turning, offering a wear-resistant CVD coating and a double-sided chipbreaker for controlled chip formation. CVD-coated carbide grade T6215 Rhombic CNMG 09 geometry, 0° clearance Double-sided chipbreaker, good chip control Compatible with ISO turning toolholders Consistent surface finish through controlled chip formation The combination of a CVD-coated surface and a wear-resistant carbide substrate delivers extended edge life under typical turning loads. The integrated double-sided chipbreaker reduces the risk of long, stringy chips and promotes repeatable chip segmentation; this reduces interruptions and contributes to a predictable surface finish during both external and internal turning operations. The insert’s 0° clearance and rhombic CNMG geometry help maintain stable cutting engagement, while the CVD layer resists abrasive wear common when machining stainless steels. Straightforward indexing and broad ISO compatibility Constructed to the ISO CNMG form, the indexable plate features a central cylindrical hole and standard dimensions that support secure mounting in many commercial holders. Compatibility with a holder depends on geometry, clearance angle, tolerance class, fastening method, size and thickness; the modular system comprises an ISO insert, a matching external holder or boring bar, a shim/clamping kit and replacement screws. Quick indexing restores a fresh cutting edge without complex setup, enabling efficient tool management and reduced machine downtime. Productivity gains in stable and lightly interrupted turning The T6215 grade offers a balance between wear resistance and toughness suitable for machining stainless steels under stable to slightly interrupted conditions. This yields longer tool life and lower cost per component in medium- to high-volume production runs. The insert’s rhombic 09 size and 80° included angle provide rigidity for heavier cuts while remaining versatile for finishing passes. For process engineers, the result is a measurable improvement in cycle-time consistency and fewer unscheduled tool changes. Contact Metav Werkzeuge today for tailored advice on using Tungaloy T6215 inserts in your turning processes and to check current availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6944523 Manufacturer SKU: TUN6944523 SKU: 6944523-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNMG090402 T6215 Tungaloy insert Facts Corner radius: 0.2 mm Thickness: 4.76 mm Inscribed circle: 09 Included angle: 80° Clearance angle: 0° Plate form: Rhombic Special features Material: carbide Coating / grade: CVD-coated, T6215 Chipbreaker: double-sided Hole: with cylindrical hole Free angle: 0° Application: turning (external and internal) Suitable for: stainless steels under stable to lightly interrupted conditions System components: ISO insert, matching holder/boring bar, shim/clamping kit, spare screws FAQ Which materials is this insert suitable for? The CNMG090402 T6215 Tungaloy indexable insert is specified for machining stainless steels and performs well under stable to lightly interrupted turning conditions. Is the CNMG090402 compatible with standard ISO toolholders? Yes, the CNMG090402 conforms to ISO CNMG geometry; compatibility depends on holder shape, clearance angle, tolerance class, attachment method, size and thickness, so match the insert to an ISO holder with the correct specifications. What is the coating and what are its benefits? The insert uses a CVD-coated carbide in grade T6215, providing a wear-resistant surface that improves flank and crater wear behaviour during turning of stainless steels. How does the chipbreaker affect machining? The double-sided chipbreaker on the CNMG090402 promotes controlled chip segmentation and safer chip evacuation, aiding in consistent surface finish and reduced risk of chip-related interruptions. What should be considered when selecting a holder and clamping system? Selection should account for the insert’s rhombic geometry, 0° clearance, thickness and central hole style; the typical system includes the ISO insert, a compatible external holder or boring bar, a shim/clamping kit and suitable replacement screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO CNMG090402 geometry and a double-sided chipbreaker for consistent stainless steel turning performance; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimal machining setups. CNMG090402 T6215 CNMG 090402 Turning Insert by Tungaloy — CVD-coated carbide for stainless steel turning A CNMG090402 T6215 indexable turning insert designed for ISO-compatible holders, providing wear-resistant performance in stable to lightly interrupted turning of stainless steel. CVD-coated carbide grade T6215 ISO CNMG090402 rhombic insert Double-sided chipbreaker for stability Cylindrical central hole for secure clamping High-performance grade for stainless steel turning The insert uses a CVD-coated carbide substrate, T6215, developed for prolonged tool life when machining stainless steel. The coating improves wear resistance at the cutting edge, reducing flank wear and preserving geometry under continuous operation. For production environments this translates into fewer tool changes and more predictable component quality. The wear behaviour of the grade is suited to stable to slightly interrupted cuts, so the benefit is lower process downtime and improved machining economy. Precise geometry and secure clamping for repeatable results Configured as an ISO CNMG rhombic insert with an 80° included angle and 0° clearance, the geometry supports robust cutting engagements while maintaining form accuracy. The cylindrical central hole and standard tolerance classes ensure consistent seating in compatible holders, while the 4.76 mm plate thickness and 0.2 mm corner radius enable reliable strength and defined corner transitions. These characteristics reduce vibration and help achieve repeatable dimensional control when paired with a correctly matched holder. Improved chip control and machining stability The double-sided chipbreaker offers chip control adapted to turning operations, guiding swarf away from the cutting zone and reducing the risk of re-cutting. Stable chip formation contributes to better surface finish and predictable cycle times, especially when machining long or contoured stainless parts. The insert’s combination of geometry and chipbreaker design supports higher process reliability, which is particularly valuable in batch production and when consistent surface integrity is required. Practical guidance for selection and integration The insert is part of an ISO-indexable system: select a suitable external holder or boring bar that matches the insert form, clearance angle, thickness and fastening method. When integrating into a toolset, consider the workpiece material, depth of cut and stability of the setup to choose the most effective chipbreaker and cutting parameters. If uncertain about holder compatibility or optimal cutting data, the technical team at Metav Werkzeuge can advise on clamping options and parameter tuning to maximise tool life and component quality. For tailored machining advice or to confirm holder compatibility for the CNMG090402 T6215 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss recommended setups and product availability. Technical Data Manufacturer article number: 6944488 Manufacturer SKU: TUN6944488 Internal SKU: 6944488-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Plate size: 09 Plate thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Corner radius: 0.2 mm Special features Grade/coating: T6215, CVD-coated carbide Plate shape: rhombic Hole: with hole (cylindrical) Chipbreaker: double-sided Typical application: turning stainless steel System: ISO indexable insert series FAQ What materials is this insert intended for? The CNMG090402 T6215 insert is designed primarily for machining stainless steel and performs best in stable to lightly interrupted turning conditions. How does the insert secure to the holder? The insert features a cylindrical central hole and ISO-standard form that allow secure clamping in compatible external holders or boring bars when assembled with the correct clamping set and screw. Can this insert be used for interrupted cuts? Yes, the T6215 grade is formulated for stable to lightly interrupted machining; heavier interruptions may require a different geometry or grade for optimal performance. What benefits does the CVD coating provide? The CVD coating on this carbide grade improves wear resistance and edge life, leading to longer tool life and more consistent surface quality during production turning. Is the chip control suitable for long-turning operations? The double-sided chipbreaker supports improved chip guidance and is beneficial for many turning tasks, helping to maintain surface finish and reduce the risk of re-cutting chips. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, precise ISO CNMG geometry and a CVD-coated carbide grade to keep turning operations productive and repeatable. Order the genuine insert via Metav Werkzeuge or request application advice from our consultants for optimal holder compatibility. CNMG 090402 T6215 Tungaloy turning insert — ISO rhombic, 80° geometry for turning A CNMG090402 T6215 indexable insert designed for external and internal turning, offering wear-resistant CVD-coated carbide for stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 ISO rhombic CNMG 09, 80° geometry 0.2 mm nose radius for improved surface finish Cylindrical hole and double-sided chipbreaker Maximum process stability through advanced coating and grade The CVD-coated carbide composition of this insert delivers consistent wear resistance and prolonged edge life under standard and slightly interrupted cuts, which reduces changeover frequency and tool inventory. The T6215 grade is tailored for turning stainless steels where adhesion and built-up edge are common concerns; the coating limits surface diffusion and abrasive wear. In practical terms, this means fewer rejects and longer uninterrupted machining cycles, supporting a predictable production cadence and lower unit cost over time. Precise geometry for secure clamping and fine surface quality The ISO CNMG rhombic form with an 80° cutting angle and a 0.2 mm nose radius enables a balance between robustness and surface finish. The cylindrical hole provides reliable mechanical location in compatible holders, while the double-sided chipbreaker permits indexing to a fresh edge and maintains controlled chip formation. For users less familiar with tooling language: an indexable insert such as this is designed to be clamped into a matching holder; the specified form, clearance and thickness determine compatibility and performance, so matching holder geometry and tolerance class is essential for achieving the stated benefits. Designed for efficient turning workflows and flexible applications Configured for conventional turning tasks, the insert supports both external and internal operations when combined with the appropriate holder and clamping set. The double-sided design effectively halves tooling cost per usable edge compared with single-sided alternatives, while the CVD coating and substrate combination ensure stable edge life in repetitive production runs. Choosing the right chipbreaker and grade for the workpiece material and machining stability will result in predictable surface quality and fewer tool-indexing events, helping to keep cycle times tight and throughput high. For tailored tooling recommendations or to procure genuine Tungaloy indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and batch supply options. Technical Data Manufacturer SKU: TUN6966070 Article number: 6966070 SKU: 6966070-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Nose radius: 0.2 mm Plate thickness: 4.76 mm Insert size: 09 Insert angle: 80° Clearance angle: 0° Special features Shape: rhombic (CNMG) Grade/coating: T6215, CVD-coated carbide Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning (external and internal) Material: carbide FAQ Is this insert suitable for stainless steel machining? Yes. The T6215 CVD-coated grade in this CNMG090402 insert is formulated for turning stainless steels under stable to lightly interrupted conditions, providing improved wear resistance and surface quality. How does the CNMG 09 geometry affect holder selection? Holder compatibility depends on the insert form, clearance, tolerance class, fastening method, size and thickness; the CNMG 09 rhombic geometry and 80° angle require a matching ISO CNMG external or internal holder. Can the insert be indexed to use both cutting edges? Yes. This is a double-sided indexable insert with a cylindrical hole and a double-sided chipbreaker, allowing rotation to a fresh edge to extend tool life and reduce tooling cost per edge. What surface finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius supports finer surface finishes and lower cutting forces compared with larger radii, making it suitable for operations where improved part appearance and tighter tolerances are desired. Which components are required for a complete turning setup with this insert? A complete system includes the ISO indexable insert, a compatible external or internal holder or boring bar, a backing/locking set and replacement screws; correct holder matching ensures repeatable positioning and cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 for high wear resistance and ISO‑standard geometry for reliable holder compatibility; the defined 0.2 mm corner radius and double‑sided chipbreaker support steady productivity in medium‑steel turning. Order the insert directly via Metav Werkzeuge or consult the team for application matching. CNMG090402 T9215 – ISO turning insert, CVD‑coated carbide, 0.2 mm radius | Tungaloy The CNMG090402 T9215 is an ISO‑indexable turning insert designed for medium‑steel machining, offering a rhombic form with a cylindrical central hole, double‑sided chipbreaker and a 0° relief angle for stable external and internal turning operations. CVD‑coated carbide T9215 for medium steel ISO rhombic insert, size 09 0.2 mm corner radius for defined cutting edge Double‑sided chipbreaker with cylindrical hole Reliable material removal for continuous production The CVD‑coated T9215 grade provides a balance of wear resistance and fracture toughness that supports sustained machining under continuous to slightly interrupted cuts. As a carbide indexable insert, it is optimised for medium‑strength steel where consistent tool life and minimal downtime contribute directly to production efficiency. The coating reduces flank wear and helps maintain dimensional stability across longer tool lives, which in turn lowers total machining costs per component. Defined edge geometry for consistent surface finish With a 0.2 mm corner radius and a rhombic 09 form, the insert gives a repeatable cutting geometry that aids in achieving uniform surface finishes and predictable tool behaviour. The 0° relief angle contributes to controlled cutting forces and a clear contact geometry between insert and workpiece. For applications requiring tight tolerances, the precise edge definition reduces the need for frequent adjustments and ensures reproducible results across batches. System compatibility and straightforward integration ISO‑standard designation ensures compatibility with a wide range of holders; compatibility is determined by insert shape, relief angle, tolerance class, clamping style, size and thickness. The CNMG090402 format, with a cylindrical hole and standard mounting, simplifies replacement and reduces setup time in mixed‑tool environments. Clear ISO conformity also helps when specifying tool inventories and matching inserts to existing toolholders in the toolroom. Grade and chip control tuned to the task The double‑sided chipbreaker geometry supports efficient chip formation and evacuation when machining steel, while the CVD coating helps manage heat and abrasive wear. The T9215 grade is recommended as a first choice for medium‑steel applications where a compromise between productivity and tool life is needed; selecting the chipbreaker and grade according to workpiece stability and cutting conditions yields the best balance of surface quality and throughput. Contact Metav Werkzeuge for a tailored recommendation on holder compatibility and application‑specific cutting data for the Tungaloy CNMG090402 T9215 turning insert Technical data Manufacturer article number: 6782304 Manufacturer SKU: TUN6782304 SKU: 6782304-Tungaloy Model series: ISO‑indexable turning inserts Designation: CNMG090402 T9215 Dimensional data Size: 09 Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included angle: 80° Material and features Material: carbide Coating: CVD Grade: T9215 Chipbreaker: double‑sided Hole: with cylindrical hole Shape: rhombic Application: turning Typical use: medium steel, continuous to slightly interrupted cuts FAQ What workpiece materials are suitable for this insert? The CNMG090402 T9215 insert is developed for medium‑steel machining; the T9215 CVD‑coated carbide provides wear resistance and toughness appropriate for a broad range of steel grades. Can the insert be used for both external and internal turning? Yes. The rhombic form, 0° relief and double‑sided chipbreaker make the insert suitable for both external and internal turning applications when combined with a compatible holder. How does the chipbreaker influence performance? The double‑sided chipbreaker on the CNMG090402 promotes controlled chip formation and evacuation, improving surface finish and reducing risk of built‑up edge during steady cutting conditions. What should be considered when matching holders? Holder compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; use the ISO‑conformant geometry of the CNMG090402 to select a matching external holder or boring bar. Is this insert indexable on both sides? Yes; the double‑sided design permits indexation to the unused cutting edge, extending service life per insert and offering economical use in production settings. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture toughness and ISO interchangeability to keep turning cycles productive and predictable; order genuine inserts via Metav Werkzeuge or consult our specialists for holder compatibility. CNMG090402 T9215 turning insert, CVD-coated carbide, 0.2 mm radius – Tungaloy A CNMG090402 T9215 insert designed for external and internal turning, optimised for medium steel machining with continuous to slightly interrupted cuts CVD-coated carbide grade T9215 for medium steel ISO CNMG 09 rhombic insert with 80° included angle Double-sided chipbreaker with cylindrical hole 0.2 mm corner radius and 4.76 mm thickness Boosted productivity through wear-resistant cutting grade The T9215 grade combines a CVD-coated finish with a wear-resistant carbide substrate to provide elevated tool life under continuous and lightly interrupted turning. This material pairing reduces flank wear and preserves cutting edge integrity, which translates to fewer tool changes and steadier cycle times. The result is reliable, repeatable performance and a reduction in setup interruptions when machining medium-strength steels, supporting a more stable production flow. Robust geometry for secure cutting and versatility The ISO CNMG rhombic geometry with an 80° included angle and 0.2 mm corner radius gives a balance between strength and edge definition suitable for general turning tasks. The double-sided chipbreaker and cylindrical hole ensure stable clamping and predictable chip control, while the 4.76 mm plate thickness contributes to edge rigidity. These geometric choices make the insert appropriate for both light finishing and more demanding external operations when paired with a correctly matched holder. Simple integration into ISO tool systems Designed as an ISO-standard indexable insert, compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness. When mounted in a suitable CNMG-capable external holder or boring bar and secured with the appropriate backing/clamp set and screws, the insert delivers consistent seating and repeatable results. The combination of standard sizing and robust cutting grade simplifies inventory management and reduces the need for special tooling, aiding operational efficiency. Application guidance and practical advantages This insert is a first choice for medium steel machining, offering a productive compromise between wear resistance and fracture toughness for continuous to slightly interrupted cuts. The CVD-coated surface supports higher cutting speeds and improved surface finishes under stable conditions, while the rhombic form and double-sided chipbreaker broaden the range of compatible machining tasks. For best results, match the insert grade and chipbreaker to material, machining style and machine stability to exploit the grade’s full potential. Contact Metav Werkzeuge today for genuine Tungaloy CNMG090402 T9215 inserts, expert guidance on holder compatibility and rapid supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944521 Manufacturer SKU: TUN6944521 Name: CNMG090402 T9215 Tungaloy insert Brand: Tungaloy Facts Corner radius: 0.2 mm Plate thickness: 4.76 mm Insert size: 09 Included angle: 80° Clearance angle: 0° Hole style: cylindrical hole Chipbreaker: double-sided Special features Material: carbide Coating: CVD Grade: T9215 Insert shape: rhombic (CNMG) Application: turning (external and internal) Typical use: medium steel, continuous to slightly interrupted cuts System components: ISO insert, compatible holder or boring bar, backing/clamp set and screws FAQ What materials is this grade intended for? The T9215 grade is intended primarily for medium steel; the CNMG090402 T9215 insert performs well in continuous to slightly interrupted turning of steel variants. How does the chipbreaker affect performance? The double-sided chipbreaker provides reliable chip control across a range of feeds and depths, helping to maintain surface quality and reduce chip-related interruptions when using the Tungaloy CNMG insert. Is the insert reversible and how many cutting edges are available? The rhombic CNMG format with a double-sided chipbreaker is indexable; the insert provides multiple usable edges per index based on standard CNMG geometry. What must be considered for holder compatibility? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; selecting an ISO-compatible holder that matches these parameters ensures correct seating and clamping. Can this insert handle interrupted cuts? Yes—the T9215 grade is suitable for continuous to slightly interrupted cuts; for heavy or severely interrupted machining, a more robust grade or adjusted cutting data is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9215 Wendeplatten - Tungaloy
Combining CVD-coated cemented carbide T9215, a double-sided chipbreaker and the ISO CNMG090402 form yields a durable, high-productivity turning solution for medium-steel applications — order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process setup. CNMG 090402 T9215 – Tungaloy indexable turning insert for turning A CNMG090402 T9215 indexable insert for external and internal turning, engineered for medium-steel machining with high productivity and reliable edge life CVD-coated cemented carbide grade T9215 Double-sided chipbreaker for chip control ISO CNMG090402 rhombic form with hole 0.2 mm corner radius for robust edge life High productivity through a CVD-coated cutting grade The core advantage of this insert is the CVD-coated cemented carbide substrate matched to grade T9215, which combines elevated wear resistance with fracture toughness suitable for continuous to lightly interrupted cuts. This composition reduces flank wear and extends tool life, translating directly into fewer indexings and higher cumulative machining throughput. For workshops seeking consistent cycle times on medium-alloy steels, the combination of coating and substrate provides a measurable efficiency gain while maintaining surface integrity. Reliable compatibility and predictable set-up with ISO form The ISO CNMG090402 designation and the rhombic geometry with a central hole ensure straightforward integration into ISO-compatible turning holders. Compatibility is governed by form, clearance angle, tolerance class, clamping method, size and thickness; the rhombic form and 0° clearance are optimised for versatile orientation and repeatable clamping. Specifying the correct holder and underlay plate avoids unexpected run-out and secures the stated cutting performance, making tool changeovers faster and setup more predictable for production environments. Controlled chips and stable cutting under real conditions The double-sided chipbreaker and a 0.2 mm corner radius deliver controlled chip formation and a robust cutting edge for both external and internal operations. With a plate thickness of 4.76 mm, the insert offers structural stiffness that resists edge collapse during interrupted cuts, while the cylindrical hole enables secure clamping and easy indexation. This combination reduces unplanned downtime and improves surface finish consistency, contributing to lower unit costs and greater confidence in process stability. For guidance on holder selection or cutting parameters, the technical team at Metav Werkzeuge provides application support to match the insert to machine rigidity and workpiece material. Contact Metav Werkzeuge for tailored holder recommendations and to order the Tungaloy CNMG090402 T9215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6782308 SKU: 6782308-Tungaloy Manufacturer SKU: TUN6782308 Model series: ISO turning indexable inserts Material: cemented carbide Numbers / Core Technical Data Thickness: 4.76 mm Corner radius: 0.2 mm Insert size: 09 Clearance angle: 0° Cutting edge angle: 80° ISO designation: 090402 Designs / Special features Rhombic plate form With hole — cylindrical hole Double-sided chipbreaker Grade T9215, CVD-coated cemented carbide Compatibility determined by form, clearance, tolerance, clamping, size and thickness FAQ What materials is this insert suited for? This Tungaloy CNMG090402 T9215 insert is designed primarily for medium-steel machining and provides a balance of wear resistance and toughness for productive turning operations. How is chip control achieved with this insert? Chip control is provided by the double-sided chipbreaker and the insert geometry; the grade T9215 and the rhombic form support consistent chip shaping under continuous to slightly interrupted cuts. Can this insert be used for internal turning? Yes, the rhombic geometry and secure clamping via the cylindrical hole make the insert suitable for both external and internal turning applications when used with appropriate holders. Which holders are compatible with the ISO CNMG090402 form? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; matching an ISO-compatible holder to the CNMG090402 form ensures correct seating and repeatable performance. What are the key dimensional details to check before ordering? Verify the insert thickness (4.76 mm), corner radius (0.2 mm), insert size (09) and the ISO designation 090402; these ensure correct fit and expected cutting behaviour with the chosen holder Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9215 Wendeplatten - Tungaloy
Combining the CVD‑coated T9215 grade with a 0.2 mm corner radius and a double‑sided chipbreaker yields a durable, productivity‑orientated turning solution for medium steel machining; order the insert directly via Metav Werkzeuge or consult our specialists for tailored application support. CNMG 090402 T9215 Tungaloy – ISO turning insert with CVD‑coated carbide, rhomboid form, 0° relief CNMG 090402 T9215 is an ISO‑standard turning insert designed for medium steel machining and compatible ISO holders; its rhomboid form and cylindrical hole ensure secure clamping and repeatable positioning. CVD‑coated carbide grade T9215 0.2 mm corner radius Double‑sided chipbreaker ISO CNMG compatibility High throughput with controlled wear for medium steel The CVD‑coated carbide composition of the T9215 grade delivers a robust combination of wear resistance and fracture toughness that is particularly suited to medium steel applications. The coating reduces flank and crater wear under continuous to lightly interrupted cuts, which translates into longer effective tool life and fewer index changes. Specifying an insert with a 0.2 mm corner radius helps maintain dimensional stability on external profiles while balancing edge strength; this trade‑off supports higher feed rates without sacrificing surface integrity. The overall result is a measurable improvement in machining consistency and productivity when replacing conventional uncoated or lower‑grade inserts. Secure fit and ISO compatibility to reduce downtime Belonging to the ISO turning insert series, the CNMG 090402 geometry is defined so that compatibility with the toolholder depends on form, relief angle, tolerance class, clamping method, size and thickness. The rhomboid plate shape and the cylindrical centre hole provide reliable clamping and repeatable indexing in matched CNMG holders or boring bars. With a plate thickness of 4.76 mm and a nominal included angle of 80°, the insert sits stably in the pocket, reducing chatter and facilitating predictable wear patterns. Clear fitment standards lower the risk of incorrect assembly and shorten tool changeover times, contributing to smoother process flow on the shop floor. Optimised chip control for continuous productivity The double‑sided chipbreaker geometry is engineered to support effective chip formation and evacuation during routine turning operations. Good chip control reduces the likelihood of built‑up edge and workpiece marking, improving first‑pass quality and reducing rework. For continuous machining or light interruptions, the combination of the insert’s geometry and the T9215 grade maintains cutting stability, enabling longer uninterrupted runs and higher overall throughput. By reducing unexpected stops for edge changes and managing swarf more consistently, the insert helps maintain planned cycle times and labour efficiency. Grade and coating in plain terms The designation T9215 indicates a CVD‑coated carbide grade optimised for a wide range of steels; the coating provides a hard, heat‑resistant surface while the substrate retains core toughness, which helps prevent premature fracture under higher feed or interrupted cuts. The 0° relief means the insert is manufactured for neutral clearance suited to many turning setups; paired with the rhomboid CNMG shape, it supports both external and internal turning tasks when used with matching holders. For customers less familiar with coating technologies: CVD (chemical vapour deposition) creates a uniform, adherent layer that increases resistance to abrasive wear and thermal degradation, extending edge life in demanding production environments. For reliable medium‑steel turning with Tungaloy quality, contact Metav Werkzeuge for application advice or to arrange supply — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 — our specialists can confirm holder compatibility and recommended cutting strategies. Technical Data Article number: 6966067 Manufacturer SKU: TUN6966067 SKU: 6966067-Tungaloy Manufacturer: Tungaloy Facts Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 80° Relief angle: 0° Size: 09 Special features ISO designation: CNMG090402 Grade/coating: T9215 (CVD‑coated carbide) Plate form: rhomboid Hole: with hole, cylindrical hole Chipbreaker: double‑sided Application: turning FAQ What materials is this insert intended for? The CNMG 090402 T9215 insert is optimised for medium steel machining; the T9215 CVD‑coated carbide grade balances wear resistance and toughness for continuous to slightly interrupted turning operations. Will this insert fit existing CNMG holders? Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; the CNMG090402 geometry matches standard CNMG toolholders when the pocket is specified for ISO CNMG inserts. What advantages does the T9215 coating provide? The CVD coating on the T9215 grade improves resistance to flank and crater wear and supports higher productivity by maintaining edge condition longer under elevated temperatures typical of continuous steel cutting. How does the double‑sided chipbreaker affect use? A double‑sided chipbreaker allows effective chip control on both usable faces of the insert, enhancing swarf management and surface finish during routine turning cycles. Is the corner radius suitable for profile turning? The 0.2 mm corner radius offers a compromise between edge strength and fine profile definition, making it suitable for many external turning profiles where a moderate radius is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090402 T9225 Wendeplatten - Tungaloy
Reliable machining for medium to heavy steel: CVD-coated carbide grade T9225 combines toughness with wear resistance, while the ISO CNMG090402 geometry and secure clamping deliver repeatable engagement; order directly via Metav Werkzeuge or consult our specialists for application advice and availability. CNMG 090402 T9225 turning insert – CVD-coated carbide, rhombic 80° – Tungaloy CNMG 090402 T9225 is a rhombic, ISO-format turning insert developed for external and internal turning in medium to heavy steel applications, offering robust performance where intermittent cuts and variable engagement demand extra toughness. CVD-coated carbide grade T9225 Universal for medium to heavy steel machining Rhombic 80° geometry, 0.2 mm corner radius Cylindrical hole and double-sided chipbreaker Consistent cutting performance that raises throughput The CVD-coated carbide composition of this insert delivers a balance of wear resistance and toughness, specifically formulated for the demands of medium to heavy steel turning. The T9225 grade provides stable chip formation under changing engagement conditions, which reduces unexpected downtime and supports more predictable tool life. Compatibility with ISO holders is governed by form, clearance angle, tolerance class, clamping method, size and thickness, so correct selection of the mating holder and clamping hardware is essential to realise the full productivity benefits. Geometry engineered for accuracy and repeatability The rhombic 80° shape combined with a 0° clearance and a 0.2 mm corner radius ensures reliable engagement and good surface finish in both external and internal turning. A plate thickness of 4.76 mm and the standard 09 size lend mechanical stiffness that improves stability at higher feeds. The cylindrical centre hole and double-sided chipbreaker design support quick indexing and economical usage of both sides, reducing per-cut costs while maintaining consistent cutting conditions across repetitive production runs. Clear guidance for application and tool selection Designed primarily for turning operations, the insert suits situations where slightly interrupted cuts or fluctuating contact require added toughness rather than a purely abrasive-resistant grade. The CVD coating protects the substrate at elevated temperatures and helps preserve the cutting edge when machining steel; carbide substrate ensures rigidity and fracture resistance. Choose the chipbreaker and clamping arrangement according to workpiece material, required surface finish and machine stability to achieve the intended balance of productivity and tool life. For reliable supply and application support of Tungaloy CNMG090402 T9225 inserts, contact Metav Werkzeuge for order placement and practical machining advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6787102 Manufacturer SKU: TUN6787102 Model series: ISO turning inserts Facts ISO designation: CNMG090402 Insert size: 09 Thickness: 4.76 mm Nose radius: 0.2 mm Clearance angle: 0° Approach angle: 80° Special features Grade: T9225 Material: carbide Coating: CVD-coated Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ Is this insert suitable for medium and heavy steel turning? Yes. The CNMG090402 T9225 turning insert from Tungaloy is a universal, robust grade designed for medium to heavy steel machining and for operations with variable engagement. How does the T9225 grade improve process reliability? T9225 combines a carbide substrate with a CVD coating to give enhanced toughness and wear resistance; the result is stable chip formation and repeatable performance in the face of interrupted or changing cuts. What must be considered for holder compatibility? Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; ensure the chosen holder matches the CNMG090402 profile and the clamping hardware used. Can the insert be rotated or indexed on both sides? Yes. The double-sided chipbreaker and central cylindrical hole permit economical indexing and use of the second cutting edge, improving cost-efficiency per edge for repeat production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide T9225 combined with a 0.2 mm nose radius and ISO rhombic geometry delivers stable chip control and consistent tool life under medium-to-heavy cutting conditions. Compatibility with standard CNMG holders ensures rapid index changes and process reliability. Order the CNMG090402 T9225 directly via Metav Werkzeuge or ask our consultants if needed. CNMG090402 T9225 Turning insert — rhombic CNMG, 80° included angle | Tungaloy The CNMG090402 T9225 is an ISO-standard rhombic turning insert engineered for external and internal turning applications; designed as a robust universal grade for variable engagement conditions and lightly interrupted cuts in steel machining. ISO rhombic insert CNMG090402 CVD-coated carbide grade T9225 0.2 mm nose radius for versatile turning Double-sided insert with cylindrical hole Productive performance for medium-to-heavy steel turning The insert’s CVD-coated carbide T9225 grade offers a balance of abrasion resistance and toughness that supports sustained productivity when machining steel under changing engagement and intermittent cut conditions. The coating improves resistance to built-up edge and thermal wear, which translates into longer tool life and fewer indexings. Thanks to the universal character of the grade, the component is suitable for roughing and semi-finishing passes where consistent material removal rates and predictable flank wear are required, helping to reduce downtime and improve overall process efficiency. Precision geometry and reliable clamping for consistent results With a rhombic profile and an 80° included angle, the insert provides good edge strength and versatility across turning motions. The 0.2 mm nose radius supports a reliable surface finish while maintaining sufficient edge robustness for heavier cuts. The insert’s design, including a cylindrical hole, ensures secure mounting in ISO CNMG holders and compatibility with common external holders and boring bars; this reduces setup time and minimises vibration. Together, geometry and secure clamping enable repeatable dimensional accuracy and predictable tool performance across batch runs. Practical selection and process advice for stable chip control The double-sided chipbreaker configuration and the insert’s universal grade make it straightforward to select a cutting data window: choose the chipbreaker and insert grade to match the workpiece material and rigidity of the setup. Where interrupted cuts occur or workpiece support is limited, the tougher T9225 grade helps prevent premature edge chipping. For finishing passes a smaller nose radius and higher cutting speed may be used for improved surface quality, while roughing benefits from increased feed and a focus on stable clamping. The term CVD coating here refers to a chemical vapour deposition layer that enhances surface hardness and wear resistance without sacrificing substrate toughness. For reliable medium-to-heavy steel turning with Tungaloy performance, contact Metav Werkzeuge for tailored advice or to procure the CNMG090402 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6787098 Manufacturer SKU: TUN6787098 SKU: 6787098-Tungaloy Designation: CNMG090402 T9225 Tungaloy-Wendeplatte Facts Included angle: 80° Nose radius: 0.2 mm Thickness: 4.76 mm Size: 09 Free angle (rake): 0° Hole style: cylindrical hole Special features CVD-coated carbide grade T9225 Double-sided chipbreaker Rhombic plate form (CNMG) ISO-standard turning insert With hole for secure clamping FAQ Which turning operations suit this insert? The CNMG090402 T9225 is intended for external and internal turning; it performs well in medium-to-heavy steel removal where robustness and chip control are priorities. What materials are recommended for this grade? Tungaloy’s T9225 grade is a robust universal carbide suited primarily to various steel applications, especially where interrupted cuts or varying engagement demand increased toughness. How does the CVD coating benefit the tool life? The CVD-coated carbide construction reduces abrasive wear and improves thermal resistance; this combination extends the usable life of the cutting edge and stabilises performance during longer cutting cycles. Is the insert compatible with standard holders? Yes — the ISO CNMG geometry, cylindrical hole and specified dimensions make the CNMG090402 compatible with matching CNMG external holders and boring bars that accept ISO rhombic inserts. What should be considered when choosing the chipbreaker? Select a chipbreaker that matches the cutting mode and material: the double-sided chipbreaker on this insert provides flexibility to optimise chip formation for both roughing and semi-finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide and robust universal grade T9225 for stable chip control and extended tool life; the 80° rhombic geometry with a 0.2 mm corner radius ensures reliable performance in medium to heavy turning operations — order via Metav Werkzeuge or request advice from our consultants. CNMG 090402 090402 T9225 Turning insert — CNMG, CVD‑coated carbide, 80° rhombic by Tungaloy A CNMG090402 T9225 is an ISO‑standard rhombic turning insert developed for medium to heavy steel turning, offering a balanced mix of toughness and wear resistance for varying engagement conditions. CVD-coated carbide grade T9225 80° rhombic geometry, 0.2 mm radius Double-sided with cylindrical hole Designed for medium to heavy steel turning Reliable cutting performance for varying conditions The indexable insert combines a CVD‑coated carbide substrate with a robust universal grade, providing consistent cutting behaviour even under fluctuating engagement depths or briefly interrupted cuts. The T9225 formulation increases toughness, reducing the risk of chipping when conditions change; this contributes directly to process stability and fewer unplanned tool changes. In practice, stable chip formation improves surface finish and reduces cycle time, making the component valuable for production environments where predictable output is essential. Cost‑efficient use and simple indexing Being double‑sided and featuring a cylindrical hole, the insert delivers economical indexing: two usable cutting edges per side reduce tooling costs per part and speed up replacement procedures. The 0.2 mm corner radius balances edge strength and finish quality — a larger radius supports heavier cuts while still enabling acceptable surface integrity. The 80° rhombic geometry gives a versatile cutting orientation that suits both roughing and finishing passes, depending on toolholder choice and cutting parameters. Practical integration and holder compatibility Compatibility with a toolholder is determined by form, clearance angle (0°), tolerance class, fastening method, size and thickness; the ISO‑conformant design facilitates straightforward selection of matching holders and clamping sets. The plate thickness of 4.76 mm and size designation 09 make the insert suitable for standard external and internal turning holders. As a CVD‑coated carbide product designed for steel machining, the insert supports higher cutting speeds and improved edge life compared with uncoated grades, particularly where mixed cutting conditions demand additional toughness. Contact Metav Werkzeuge for application-specific advice on Tungaloy CVD‑coated carbide inserts and fast supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6966068 Manufacturer SKU: TUN6966068 SKU: 6966068-Tungaloy Manufacturer article number: 6966068 Facts Corner radius: 0.2 mm Geometry angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Size designation: 09 Special features Rhombic plate form (CNMG) CVD‑coated carbide grade T9225 Double‑sided with cylindrical hole Double‑sided chipbreaker Suitable for turning (external and internal) Designed for medium to heavy steel machining FAQ What materials is this insert intended for? The CNMG090402 T9225 insert is specified for medium to heavy steel machining; the CVD‑coated carbide and T9225 grade provide the toughness required for such applications. Is the insert indexable on standard ISO holders? Yes, the insert is ISO‑standard and compatible with holders that match its form, clearance angle, tolerance class, fastening method, size and thickness. How does the 0.2 mm corner radius affect cutting? A 0.2 mm radius increases edge strength for heavier cuts while still delivering a controlled surface finish; it is a compromise between robustness and fineness of finish. Can the insert be used for interrupted cuts? The T9225 grade offers enhanced toughness for fluctuating engagement and light interruptions, making it suitable for operations where the cut is not perfectly continuous. How many usable edges does the insert offer? The double‑sided design provides multiple indexing positions, reducing tooling costs and downtime through quicker edge changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090402 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a robust CVD‑coated carbide grade, ISO conformity and a stable clamping design for consistent medium‑to‑heavy turning performance; order through Metav Werkzeuge or request tailored application advice. CNMG 090402 T9225 Turning Insert (ISO CNMG) — Tungaloy The CNMG090402 T9225 is an ISO‑standard rhombic indexable turning insert, CVD‑coated and designed for medium to heavy steel turning applications, featuring a 0.2 mm corner radius and a secure central hole for reliable clamping CVD‑coated carbide for robust performance Universal grade T9225 for medium–heavy steel ISO CNMG090402 rhombic insert, 80° cutting angle Consistent machining through a universal, wear‑resistant grade The combination of a CVD‑coated carbide substrate and the T9225 grade delivers a balance of toughness and wear resistance that suits interrupted cuts and varying engagement conditions. This means fewer tool changes and stable productivity during series production and batch work. The coating supports elevated cutting temperatures typical in steel turning, reducing flank wear while preserving the substrate’s fracture resistance. As a result, the component finish and repeatability remain reliable over longer tool lives. Secure clamping and dimensional conformity for process stability An ISO‑conforming rhombic geometry with a central cylindrical hole and an included thickness of 4.76 mm ensures repeatable seating in standard CNMG holders. The 80° cutting angle combined with a 0° clearance provides predictable cutting forces and easy toolpath programming. The central hole and standard tolerances contribute to vibration dampening and consistent seat contact, which in turn improves surface quality and reduces the risk of unexpected insert movement under load. Practical chip control and adaptability at the machine The double‑sided chipbreaker design supplies effective chip segmentation across a range of feeds, improving evacuation in both external and internal turning operations. Because chip control and cutting geometry are matched to the grade, the insert adapts well to changing depths of cut and interrupted surfaces, lowering the likelihood of built‑up edge and facilitating faster cycle times. For workshops that tackle mixed series or variable workpiece geometries, this adaptability reduces setup complexity and boosts overall throughput. Compatibility and system‑level benefits for workshop integration Being an ISO‑standard CNMG insert, compatibility with existing toolholders, clamping kits and replacement screws is straightforward where holders match form, clearance angle, tolerance class, fixing method, size and thickness. The insert integrates into standard turning systems consisting of an ISO insert, a suitable external holder or boring bar, and the necessary shims and screws, simplifying stock management and reducing procurement effort. Clear labelling and SKU alignment ease traceability in production environments. For application guidance or to check availability of Tungaloy CNMG090402 T9225 inserts, contact Metav Werkzeuge for personalised advice and order support via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 6944522 Manufacturer SKU: TUN6944522 Material: Carbide Model series: ISO turning inserts Name: CNMG090402 T9225 Facts Cutting angle: 80° Insert size: 09 Thickness: 4.76 mm Corner radius: 0.2 mm Clearance (relief) angle: 0° Hole: with hole (cylindrical) Special features Grade/coating: T9225, CVD‑coated carbide Geometry: rhombic CNMG form Chipbreaker: double‑sided chip control Application: turning, external and internal turning System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The CNMG090402 T9225 insert is formulated for medium to heavy steel turning; the T9225 grade provides toughness for interrupted cuts and variable engagement conditions. Is the CNMG090402 compatible with standard CNMG holders? Yes—being an ISO‑standard rhombic insert, compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness; the insert is designed for standard CNMG toolholders. How does the T9225 grade affect tool life and process stability? The T9225 CVD‑coated grade balances wear resistance and toughness, which enhances tool life under moderate to heavy cutting conditions and improves process stability during interrupted machining. What advantages does the central hole offer? The cylindrical central hole improves clamping repeatability and seat stability, reducing micro‑movement and contributing to consistent surface finish and tool life. Can this insert be used for finishing operations? Yes; with appropriate feeds and speeds the insert and its chipbreaker can produce consistent finishes, while the grade supports longer tool life in mixed roughing and semi‑finishing tasks. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090404 AH120 Wendeplatten - Tungaloy
Combine the PVD-coated carbide AH120 with the 0.4 mm corner radius and ISO CNMG geometry for consistent chip control and reliable process security; order the CNMG090404 AH120 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG090404 AH120 Tungaloy turning insert — PVD-coated carbide, 0.4 mm radius The CNMG090404 AH120 Tungaloy insert is an ISO-compliant rhombic turning insert designed for external and internal turning where a sharp cutting edge and high process reliability are required. PVD-coated carbide grade AH120 0.4 mm corner radius for accurate profiles Rhombic CNMG shape, 80° cutting geometry Consistent cutting performance for stable production The combination of a PVD-coated carbide grade and the CNMG geometry delivers stable wear behaviour and reduced risk of chipping during standard turning tasks. The coated hardmetal layer of the AH120 grade is optimised for wear and fracture resistance, which supports longer tool life and fewer interruptions. The ISO-standard form ensures predictable seating in compatible holders; compatibility depends on form, relief angle, tolerance class, fastening method, size and plate thickness, and the insert is intended to be used together with a suitable external holder, shim/clamp set and replacement screws. Accurate profiles and dependable surface quality A 0.4 mm corner radius produces precise contouring and improved surface finish while balancing cutting forces; for fine finishing or light profiling, this radius provides the necessary geometry without sacrificing edge stability. The insert’s double-sided chipbreaker contributes to consistent chip formation across a range of feeds and depths, easing chip evacuation and protecting the cutting edge. The cylindrical mounting hole and a plate thickness of 4.76 mm increase rigidity at the cutting point, which reduces vibration and helps achieve repeatable dimensional accuracy. Practical integration and application advice The insert is suitable for general turning applications and can be applied to both external and internal operations when combined with the correct holder and workpiece setup. Selection of the chipbreaker and grade should match the workpiece material, machining type and setup stability—choosing the AH120 grade and a matching chipbreaker will be advantageous when both a sharp edge and process security are required. For situations with variable workpiece materials or limited clamping stiffness, preference for a slightly lighter cutting engagement and closely matched holder geometry will improve performance and extend service intervals. For tailored recommendations and fast availability of Tungaloy turning inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert advice and order support Technical Data Article number: 6750461 Manufacturer SKU: TUN6750461 Label: CNMG090404 AH120 Tungaloy insert Model series: ISO turning inserts Material: carbide Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Cutting angle: 80° Clearance (relief) angle: 0° Size: 09 Mounting: cylindrical hole Special features PVD-coated carbide (AH120) Double-sided chipbreaker Rhombic CNMG shape ISO-compliant turning insert Suitable for external and internal turning Sharp cutting edge with high process security Compatible with appropriate holders, shims and clamps FAQ What work does this insert suit best? The CNMG090404 AH120 Tungaloy insert is intended for external and internal turning where a sharp cutting edge and reliable process control are required. Which materials can be machined with this grade? The AH120 PVD-coated carbide grade is designed for broad application and provides good wear and fracture resistance for a wide range of steels and alloyed materials when correctly matched with the chipbreaker and cutting parameters. How is the insert mounted? The insert uses a cylindrical mounting hole; secure seating with the corresponding external holder, shim/clamp set and replacement screws is required for stable operation. How does the 0.4 mm corner radius affect finishing? A 0.4 mm radius offers a balance between edge strength and surface finish, enabling accurate profiles while maintaining sufficient edge stability for many turning tasks. Is the insert indexable or single-use? This CNMG geometry is double-sided and indexable; both sides can be used until the cutting edges reach their wear limit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH120 Wendeplatten - Tungaloy
Benefit from a wear-resistant, PVD-coated AH120 grade and a double-sided chipbreaker that ensure reliable chip control and extended tool life; the rhombic CNMG090404 geometry with a 0° clearance angle offers secure clamping and consistent turning performance. Order the CNMG090404 AH120 Tungaloy insert directly via Metav Werkzeuge or contact the technical consultants for application support. CNMG090404 AH120 — ISO turning insert (CNMG) by Tungaloy A CNMG090404 AH120 indexable insert for turning, designed for ISO-standard holders and optimised for situations requiring a sharp cutting edge and high process security. PVD-coated AH120 carbide grade Double-sided chipbreaker for chip control Rhombic CNMG 09 geometry, 80° approach 4.76 mm thickness with cylindrical hole Consistent cutting performance through optimised grade and geometry The combination of a PVD-coated surface and a wear-resistant carbide substrate provides a stable cutting edge that resists flank wear and micro-chipping. The grade emphasises process security, maintaining dimensional stability across extended runs. The rhombic shape and the double-sided chipbreaker contribute to controlled chip formation, which reduces the likelihood of built-up edge and improves surface finish. These factors result in fewer tool changes and better machine utilisation during turning operations. Secure clamping and easy integration with ISO holders The insert’s CNMG geometry and the presence of a cylindrical hole enable reliable locating and secure fastening in compatible external holders or boring bars. The 0° clearance specification and a plate thickness of 4.76 mm increase rigidity at the cutting zone, aiding vibration damping and repeatable performance. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; maintaining these parameters ensures quick insert changes and predictable machining results. Versatile suitability and straightforward technical advantages Designed for general turning, the insert supports both external and internal turning when paired with the appropriate chipbreaker and grade selection. The PVD coating improves resistance to abrasive wear and heat, making the insert suitable where a sharp edge and good wear resistance are required. Choosing the correct chipbreaker for the workpiece material and machining stability delivers cleaner chips and reduces part rework, translating directly into time savings on the shop floor. Productivity gains and reliable brand performance Using a standardised ISO insert geometry reduces tooling complexity and inventory overhead while enabling fast replacement and minimal setup time. The AH120 grade targets a balance between wear resistance and edge toughness, promoting long tool life and stable metal removal rates. Together, geometry, coating and grade produce predictable results that support consistent cycle times and improved overall equipment effectiveness — a practical advantage for precision turning shops and production environments. For application guidance or to reserve CNMG090404 AH120 inserts from Tungaloy, contact Metav Werkzeuge for tailored recommendations and rapid supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6793698 Manufacturer SKU: TUN6793698 Distributor SKU: 6793698-Tungaloy Designation: CNMG090404 AH120 Tungaloy insert Dimensions & core data Size: 09 Corner radius: 0.4 mm Thickness: 4.76 mm Clearance angle: 0° Approach angle: 80° Hole: cylindrical Materials & special features Material: carbide Coating: PVD Grade: AH120 Chipbreaker: double-sided Geometry: rhombic (CNMG) Application: turning Model series: ISO turning inserts System components: insert, suitable outer holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suited for? The CNMG090404 AH120 insert is designed for general turning; the AH120 grade and PVD coating suit applications that require a sharp cutting edge and reliable wear resistance—select the chipbreaker that matches the specific workpiece material and process stability. How does the 0° clearance angle affect machining? A 0° clearance angle increases edge support and rigidity at the cutting zone, helping to reduce vibration and enabling stable cutting when the insert is clamped in a compatible ISO holder. Can this insert be used in both external and internal turning? Yes; the CNMG geometry and double-sided chipbreaker permit use in external and internal turning when paired with an appropriate holder and correct cutting parameters. What are the advantages of the PVD coating on this insert? The PVD coating improves resistance to abrasive wear and heat, extending tool life and maintaining a sharper edge under sustained production conditions. Which SKU corresponds to this Tungaloy insert? The Tungaloy manufacturer SKU is TUN6793698 and the distributor SKU is 6793698-Tungaloy for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Combining a PVD-coated carbide grade AH6225 and a 0.4 mm corner radius, the insert delivers a sharp, stable cutting edge for medium turning of stainless steels while maintaining good tool life. Order the genuine insert directly via Metav Werkzeuge or request application advice from our consultants. CNMG090404 AH6225 ISO turning insert for Drehen by Tungaloy The CNMG090404 AH6225 is an ISO-standard rhombic turning insert designed for reliable external and internal turning of stainless steels, featuring a PVD-coated carbide grade and a double-sided chipbreaker. PVD-coated carbide grade AH6225 Optimised for stainless steels machining 0.4 mm corner radius for versatility ISO CNMG 090404 with cylindrical hole Efficient turning performance for stainless steels The CNMG090404 AH6225 combines a PVD coating with a robust carbide substrate to provide a sharp, stable cutting edge that performs well under variable conditions. The AH6225 grade is engineered for medium cutting and general-purpose stainless steel workpieces, offering a balance between wear resistance and edge stability. This results in improved process reliability and fewer tool changes during batch production, which supports higher productivity and reduced downtime. Compatibility and quick tool changes for workshop efficiency As an ISO-standard insert, compatibility with holders is determined by form, relief angle, tolerance class, fastening, size and thickness; the rhombic shape and cylindrical hole support secure clamping in standard CNMG seats. The double-sided chipbreaker makes the insert indexable, effectively doubling usable edges and simplifying inventory. The nominal 0° relief and standard geometry mean straightforward replacement in common turning holders, enabling fast tool changes and consistent cutting performance across setups. Durability, geometry and practical application advice The 0.4 mm corner radius provides a versatile cutting profile suitable for both finishing and light roughing, while the 4.76 mm thickness and 80° wedge angle contribute to mechanical strength and vibration resistance. The PVD layer enhances high wear resistance, extending effective life when machining stainless steels, provided cutting parameters and coolant strategy are adapted to the workpiece and stability. Typical uses include external and internal turning; select the chipbreaker and grade AH6225 to match workpiece hardness and machine rigidity. For tailored cutting data and option selection, Metav Werkzeuge can provide practical recommendations to optimise cycle time and surface finish. Contact Metav Werkzeuge for tailored cutting data and to arrange supply of genuine Tungaloy CNMG090404 AH6225 turning inserts through Metav Werkzeuge. Article details Article number: 6946669 SKU: 6946669-Tungaloy Manufacturer SKU: TUN6946669 Model series: ISO turning insert series Designation: CNMG090404 AH6225 Tungaloy insert Core specifications Size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Wedge angle: 80° Relief angle: 0° Hole: with cylindrical hole Insert shape: rhombic Chipbreaker: double-sided Materials & features Material: carbide (Hartmetall) Coating: PVD Grade: AH6225 Application: turning (external and internal) Suitable for: stainless steels ISO-conform insert Compatible with appropriate holders and clamping systems Designed for medium machining and variable conditions FAQ What materials is this insert best suited for? The CNMG090404 AH6225 Tungaloy insert is formulated for stainless steels; the AH6225 grade and PVD coating deliver a balance of edge stability and wear resistance for such materials. Can this insert be used for internal turning operations? Yes, the CNMG090404 AH6225 is suitable for both external and internal turning; geometry and chipbreaker selection should match workpiece access and rigidity requirements. Which dimensions are most relevant for selecting the correct holder? Key dimensions are the size (09), thickness (4.76 mm), corner radius (0.4 mm) and the wedge angle (80°); the cylindrical hole and rhombic form determine the compatible clamping type. How does the double-sided chipbreaker benefit workshop logistics? A double-sided chipbreaker enables indexing of multiple edges, reducing inventory needs and enabling quicker edge changes to maintain consistent cutting performance with the CNMG090404 AH6225. Is the AH6225 grade suitable for varying machining conditions? The AH6225 grade is designed as a universal choice for stainless steels and performs well under changing conditions, providing a compromise between sharpness and durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of the PVD‑coated AH6225 carbide grade, the ISO CNMG090404 geometry and a sharp yet stable cutting edge for reliable stainless‑steel turning — order the CNMG090404 AH6225 Tungaloy insert directly via Metav Werkzeuge or request tailored advice from our consultants. CNMG090404 AH6225 Tungaloy indexable turning insert — ISO 090404 for turning The CNMG090404 AH6225 Tungaloy insert is an ISO‑standard indexable turning insert engineered for external and internal turning of stainless steels, offering a sharp, stable cutting edge and a double‑sided chipbreaker for versatile machining. PVD-coated AH6225 carbide grade ISO CNMG090404 rhombic insert geometry Optimised for stainless steel turning Double-sided chipbreaker, cylindrical hole Consistent geometry and a grade optimised for stainless steel The combination of ISO CNMG090404 geometry and the AH6225 PVD‑coated carbide provides predictable cutting behaviour under varying conditions. The rhombic form and the specified 0° clearance ensure steady contact with the workpiece, reducing chatter and supporting reproducible surface finish. For production environments where process stability matters, this geometry helps maintain cycle times and lowers the need for constant readjustment, so tool changes and setups become more efficient. Reliable chip control and edge stability for mid‑range turning A double‑sided chipbreaker and a cutting edge designed for a balance of sharpness and robustness enable consistent chip formation when machining stainless steel. The PVD coating enhances wear resistance and thermal stability during intermittent cuts, which is especially useful in mixed‑batch production or where cutting parameters vary. This leads to fewer unexpected tool failures and a more economical use of tool stock, improving overall shopfloor productivity. Practical compatibility and handling to simplify tooling decisions The insert is ISO‑standard and intended for use with matching CNMG holders; compatibility depends on form, relief angle, tolerance class, clamping and thickness. The insert features a cylindrical hole for secure fixing and a 0.4 mm corner radius, making it suitable for general external and internal turning tasks where a balance of edge strength and profile definition is required. Selecting a holder and clamping kit that match the ISO form will ensure correct seat contact and repeatable clamping torque, reducing assembly time and the risk of misalignment. Economic and operational benefits for workshop use Using a universal grade such as AH6225 simplifies inventory by covering a broad range of stainless‑steel applications at medium machining parameters. The PVD‑coated carbide provides enhanced tool life in many turning operations, reducing the frequency of insert changes and downtime. For workshops aiming for steady productivity and manageable stock levels, the combination of standardised form, reliable coating and a robust chipbreaking solution supports both planned series production and flexible small‑batch work. Contact Metav Werkzeuge for detailed application advice on the Tungaloy CNMG090404 AH6225 insert; technical consultation and order support are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6903156 Manufacturer SKU: TUN6903156 Label: CNMG090404 AH6225 Tungaloy‑Wendeplatte Facts Insert size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 80° Special features Grade: AH6225 (PVD‑coated carbide) Geometry: CNMG rhombic, ISO 090404 Hole: cylindrical, with hole Chipbreaker: double‑sided Application: turning (external and internal) FAQ What materials is this insert best suited for? The CNMG090404 AH6225 insert from Tungaloy is optimised for stainless steel machining and performs reliably in medium‑range turning operations. Is the insert reversible and how many cutting edges are available? The indexable design is double‑sided, providing multiple usable edges per insert and economical utilisation of the carbide blank. Which holders are compatible with this ISO form? Compatibility requires a matching CNMG‑type holder that corresponds to ISO 090404 in form, relief angle, clamping and thickness to ensure correct seating and clamping. What is the corner radius and how does it affect finishing? The insert has a 0.4 mm corner radius, which balances edge strength with the ability to produce defined contours and acceptable surface finish in general turning. Can this grade handle changing cutting conditions? Yes; the AH6225 PVD‑coated grade is designed for stable edge life under varying conditions, offering robustness alongside a sharp cutting profile. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of a sharp, stable cutting edge and PVD-coated carbide grade AH6225 for reliable turning of stainless steels, supported by an 80° rhombic geometry and a 0.4 mm corner radius for consistent surface quality. Order through Metav Werkzeuge or consult their specialists for application-specific recommendations. CNMG090404 AH6225 indexable turning insert — PVD-coated carbide, 80° rhombic (Tungaloy) CNMG090404 AH6225 is a PVD-coated indexable turning insert designed for external and internal turning; compatibility is governed by ISO form, clearance, tolerance class, clamping and thickness PVD-coated carbide AH6225 Sharp yet stable cutting edge Double-sided chipbreaker Rhombic 80° geometry, with hole Optimised process stability and consistent cutting performance The PVD-coated carbide grade AH6225 delivers a balance between edge sharpness and robustness that is particularly suited to machining stainless steels under variable conditions. The combination of a defined corner radius (0.4 mm) and a stable cutting edge reduces built-up edge formation and improves surface finish in medium-duty turning. This results in fewer interruptions for insert changes and a more predictable cycle time, which supports higher throughput and lower overall process costs. Simple integration into ISO holder systems for secure clamping Designed to the ISO indexable insert standard, the rhombic form and 80° approach angle ensure easy matching to common external holders and boring bars. The presence of a cylindrical hole facilitates positive location and secure clamping, while the insert thickness of 4.76 mm contributes to bending stiffness in interrupted cuts. Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; matching these parameters preserves tool life and ensures repeatable positioning. Chip control and versatile application in stainless steel turning The double-sided chipbreaker geometry offers controlled chip formation for the machining strategies typical in turning operations, aiding evacuation and reducing the risk of entanglement. As a universal grade for stainless steels, the design supports both external and internal turning tasks with an emphasis on repeatable performance and surface quality. The indexable format allows rapid turning of inserts to a fresh edge, maintaining productivity in batch and continuous production environments. Contact Metav Werkzeuge for tailored recommendations on tooling setups and to reserve stock of the Tungaloy CNMG090404 AH6225 insert; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6946692 Manufacturer SKU: TUN6946692 SKU: 6946692-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMG090404 AH6225 Material: Carbide (Hartmetall) Grade/coating: AH6225, PVD-coated Core specifications Corner radius: 0.4 mm Thickness: 4.76 mm Insert size: 09 Clearance angle: 0° Geometry angle: 80° Hole: with cylindrical hole Special features Rhombic insert form Double-sided chipbreaker ISO-normed indexable insert Universal grade for stainless steels Application: external and internal turning FAQ Is this insert suitable for machining stainless steels? Yes. The CNMG090404 AH6225 Tungaloy indexable turning insert (SKU TUN6946692) is formulated as a universal grade for stainless steels and is optimised for stable cutting and good surface quality. Which holder parameters determine compatibility with the insert? Compatibility is determined by holder form, clearance angle, tolerance class, clamping method, size and thickness; matching these ensures secure seating and repeatable performance with the CNMG090404 AH6225. Can indexable inserts like this be reground? Indexable inserts are designed for economical replacement rather than regrinding; the CNMG090404 AH6225 is intended to be rotated or replaced to restore cutting performance. What chip control does the insert provide? The double-sided chipbreaker on this insert promotes controlled chip formation and evacuation, supporting safer machining and more consistent surface finishes in turning operations. Is the insert suitable for both external and internal turning? Yes; the geometry and hole-mounted design make the CNMG090404 AH6225 suitable for both external and internal turning applications, provided the correct holder and cutting parameters are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of economical performance, a stable cutting edge and straightforward indexability for consistent turning results; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CNMG 090404 AH6225 turning insert by Tungaloy — PVD-coated carbide, rhombic 80° shape CNMG 090404 AH6225 is an ISO‑standard turning insert designed for general-purpose external and internal turning where a sharp, yet robust cutting edge is required ISO CNMG 090404 format PVD-coated carbide AH6225 for rostfreier Stahl Rhombic 80° geometry with cylindrical hole Double-sided chipbreaker for cost efficiency High-process reliability with an optimised cutting grade The insert combines a PVD-coated carbide substrate with the AH6225 grade, engineered as a universal solution for machining rostfreier Stahl under varying conditions. The coating improves wear resistance while the substrate maintains edge stability during medium cutting depths; this results in fewer interruptions and more predictable tool life. As part of an ISO series, the geometry is standardised so selection is based on holder compatibility and intended operation rather than bespoke tooling, which simplifies procurement and planning in production environments. Designed for secure clamping and repeatable indexability The rhombic CNMG form with a cylindrical hole and a plate thickness of 4.76 mm ensures reliable seating in compatible external holders or boring bars. The insert is double-sided, providing two usable cutting edges per index, which lowers cost per edge and reduces downtime for edge changes. Compatibility is determined by form, 0° relief angle, tolerance class, fastening and plate size; matching these parameters guarantees correct contact, repeatable clamping force and consistent cutting geometry across tool changes. Practical productivity advantages on the shop floor Using a universal grade such as AH6225 delivers a balance between edge sharpness and toughness, suitable for fluctuating cutting conditions common in batch and job shop work. The 0.4 mm corner radius supports a stable chipping behaviour while maintaining surface finish, and the 80° rhombic angle provides good access for external profiling tasks. The PVD coating helps control built-up edge and extend the effective life of the cutting edge, contributing to predictable maintenance intervals and improved overall productivity. Selection guidance and recommended setup Choose the chipbreaker and grade to match the workpiece material, machining type and fixture stability; the included double‑sided chipbreaker is a versatile starting point for general turning. Ensure the clamping set, underlay or screw meets the ISO form and tolerance requirements so that the insert seats without play. For less rigid set-ups or heavy interrupted cuts, select a more robust holder and verify that the insert orientation matches the required lead and clearance angles; correct matching reduces chatter, improves surface integrity and prolongs insert life. Contact Metav Werkzeuge for tailored application advice or to order the CNMG 090404 AH6225 turning insert — telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6903159 Manufacturer SKU: TUN6903159 SKU: 6903159-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Insert angle: 80° Relief angle: 0° Special features PVD-coated carbide (AH6225) Rhombic insert, CNMG format Cylindrical hole for clamping Double-sided chipbreaker ISO‑standard turning insert Application: Drehen (turning) Universal grade optimised for rostfreier Stahl FAQ What materials is this insert suitable for? The CNMG 090404 AH6225 turning insert is specified as a universal grade optimised for rostfreier Stahl and is primarily recommended for machining stainless-type steels under medium cutting conditions. Is the insert indexable and how many cutting edges are available? This indexable CNMG insert is double-sided, providing two usable cutting edges; each edge is identical when indexed and clamped correctly. Which dimensions and geometry should be matched in the holder? Holder compatibility depends on form, relief angle (0°), tolerance class, fastening method, size (09) and plate thickness (4.76 mm); matching these parameters ensures correct seating and secure clamping. What advantages does the PVD coating provide? The PVD coating on the AH6225 grade increases wear resistance and helps control built‑up edge during turning, supporting longer edge life and more consistent surface quality. What are the identification details for ordering? Order using Article number 6903159 or SKU 6903159-Tungaloy; the manufacturer SKU is TUN6903159 and the model is CNMG 090404 AH6225. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Combine sharp, stable cutting performance with wide material coverage and simple mounting for consistent turning results; order the CNMG090404 AH6225 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application support. CNMG090404 AH6225 CNMG turning insert for Drehen — Tungaloy, PVD-coated carbide, rhombic shape The CNMG090404 AH6225 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a sharp yet robust cutting edge optimised for rostfreier Stahl. PVD-coated carbide grade AH6225 Universal for rostfreier Stahl machining Rhombic CNMG with 0.4 mm corner radius Double-sided chipbreaker, cylindrical hole Reliable cutting performance for rostfreier Stahl and mixed conditions The insert delivers a balance of sharpness and edge stability thanks to the PVD-coated carbide grade AH6225, which is formulated for medium-depth turning under varying conditions. This combination reduces the need for frequent tool changes and supports more consistent cycle times, improving process reliability. The engineered cutting edge produces predictable chip formation, making the system suitable for a broad range of rostfreier Stahl components where surface finish and repeatability matter. ISO compatibility and secure mounting for predictable results Designed to ISO dimensions, the rhombic CNMG geometry and the cylindrical hole ensure straightforward compatibility with standard holders and boring bars. Correct selection of holder form, clearance angle, tolerance class and clamping set determines seating precision; when paired correctly, the system reduces vibration and runout, supporting dimensional accuracy. The insert’s double-sided design also allows indexable usage, extending effective tool life and lowering tooling costs per part. Material and coating explained for non-specialists The substrate is a fine-grain carbide and the surface receives a PVD coating that increases wear resistance while preserving a sharp cutting edge. In practical terms, this means improved edge life when machining rostfreier Stahl and fewer interruptions for dressing or replacement. The 0° clearance and the 0.4 mm corner radius contribute to a smooth transition between passes and help protect the edge during interrupted cuts or variable feed conditions. Operational benefits and application guidance Using this insert in a stable setup yields tangible benefits: reduced spindle idle time, more predictable tool-change intervals and reproducible surface quality. For external and internal turning, choose feeds and cutting speeds tailored to the grade AH6225 and the specific rostfreier Stahl alloy; this maximises chip control provided by the double-sided chipbreaker. If process stability is limited, prioritise a rigid clamping arrangement and conservative cutting parameters to exploit the insert’s robust edge behaviour. For application advice or to order CNMG090404 AH6225 inserts from Tungaloy, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for direct support and fast delivery. Technical Data Manufacturer article number: 6966078 Manufacturer SKU: TUN6966078 Marketplace SKU: 6966078-Tungaloy ISO designation: CNMG090404 Brand: Tungaloy Facts Insert shape: CNMG (rhombic) Corner radius: 0.4 mm Clearance angle: 0° Included hole: with cylindrical hole Plate thickness: 4.76 mm Insert size: 09 Approach angle: 80° Special features Material: carbide Coating: PVD-coated (AH6225) Chipbreaker: double-sided Application: Drehen (external and internal turning) Compatibility: ISO-standard turning systems Designed for: rostfreier Stahl machining FAQ What materials is this insert best suited for? The CNMG090404 AH6225 insert is designed primarily for machining rostfreier Stahl and performs well across a broad range of stainless alloys when cutting parameters are adapted. How does the AH6225 coating help in production? The PVD-coated AH6225 grade on the CNMG090404 improves wear resistance and maintains a sharp edge, extending tool life and supporting consistent surface finish during medium-depth turning. Can the insert be indexed, and how many cutting edges are available? This rhombic CNMG insert is double-sided and indexable, allowing multiple cutting edges to be used before disposal, which reduces tooling costs per edge. What holder features are important for optimal performance? Holder form, tolerance class, correct clamping set and rigid mounting are essential for the CNMG090404 to minimise runout and vibration, ensuring precise cutting and chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
High-performance PVD-coated carbide in the proven CNMG geometry delivers a sharp yet stable cutting edge for medium turning of stainless steel; the rhombic ISO form with a cylindrical hole and 0° clearance simplifies secure clamping. Order the CNMG090404 AH6225 Tungaloy insert directly via Metav Werkzeuge or request consultation from our technical advisors. CNMG090404 AH6225 indexable insert for turning — Tungaloy, PVD-coated carbide, rhombic 80° The CNMG090404 AH6225 is an ISO-standard indexable insert designed for external and internal turning, optimised for stainless steel and for medium-duty operations where a balanced compromise between edge sharpness and stability is required. CNMG090404 format, rhombic size 09 PVD-coated carbide grade AH6225 Optimised for stainless steel machining Double-sided chipbreaker, cylindrical hole Reliable cutting performance for stainless steel machining The AH6225 grade combines a PVD finish with a wear-resistant carbide substrate to provide a sharp and stable cutting edge for turning applications. This composition supports consistent cutting behaviour when machining stainless steel, reducing the need for frequent edge changes during varied production runs. For operators less familiar with coatings: PVD (physical vapour deposition) creates a thin, hard layer that improves wear resistance and helps maintain edge geometry under thermal and mechanical stress, which translates into steadier component tolerances and fewer scrap parts. Secure seating and repeatable tool engagement Compatibility with standard toolholders is determined by the insert’s geometry and dimensions; the rhombic ISO-standard shape, cylindrical hole and a 4.76 mm thickness ensure dependable clamping. The plate’s 80° main cutting angle and 0° clearance contribute to a predictable cutting contact that is particularly useful in set-ups with limited rigidity. The modest 0.4 mm corner radius helps to balance edge strength and surface finish. Clear identification of these parameters simplifies holder selection and reduces set-up time, improving process repeatability and lowering the risk of vibration-related tool wear. Operational economy through doubled edges and controlled chips A double-sided chipbreaker and two usable cutting edges per face mean the insert offers an economical cost-per-edge compared with single-sided alternatives. The optimised chip geometry promotes stable chip formation, easing evacuation and reducing incidental tool interference, which in turn supports longer uninterrupted cycles and improved surface quality. Careful pairing of chipbreaker style and the AH6225 grade with machine stability and cutting data yields tangible gains in overall productivity and fewer unscheduled tool changes, contributing to lower production costs over time. For availability, technical guidance or to secure stock of this Tungaloy AH6225 grade insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt, application-focused advice. Technical Data Article number: 6946783 SKU: 6946783-Tungaloy Manufacturer SKU: TUN6946783 Model series: ISO-Drehwendeschneidplatten Label: CNMG090404 AH6225 Tungaloy-Wendeplatte Facts Thickness: 4.76 mm Corner radius: 0.4 mm Main cutting angle: 80° Clearance: 0° Size: 09 Special features Material: PVD-coated carbide Grade/coating: AH6225 Plate form: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: Turning ISO designation: CNMG090404 Compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CNMG090404 AH6225 insert is designed primarily for stainless steel; the AH6225 grade and PVD coating give robust performance across a range of alloyed steels commonly found in stainless-steel turning. How does the insert secure to the holder? The rhombic form with a cylindrical hole and ISO-standard geometry provides a repeatable seating and clamping mechanism; compatibility is defined by holder form, tolerance class and the insert’s dimensions. Is the insert reversible to use multiple cutting edges? Yes, the double-sided chipbreaker design offers multiple usable edges per index, which extends service intervals and improves cost efficiency. Which features contribute to surface finish and tool life? The combination of the AH6225 grade, PVD coating and a modest corner radius supports a stable cutting edge, while the chipbreaker promotes controlled chips—together these factors enhance surface finish and extend effective tool life. Can this insert be used for internal turning as well as external turning? The ISO-standard CNMG geometry is suitable for both external and many internal turning tasks, provided the holder and overhang meet the necessary rigidity and clearance requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge, a PVD-coated AH6225 grade, and ISO compatibility for reliable turning results; order the inserts via Metav Werkzeuge or consult our technicians for matching holders and process parameters. CNMG090404 AH6225 Tungaloy turning insert — PVD-coated carbide, 0.4 mm nose radius, 80° rhombic A CNMG090404 AH6225 Tungaloy turning insert designed for external and internal turning of stainless steels, offering a balance of sharpness and edge stability for medium machining. PVD-coated carbide AH6225 Designed for stainless steels 0.4 mm nose radius for fine finishes 80° rhombic insert with central hole Double-sided chipbreaker, reusable Higher productivity through a balanced cutting concept The PVD-coated AH6225 grade is developed for consistent performance on stainless steels, combining a sharp cutting edge with sufficient edge strength for varying conditions. The PVD-coated surface reduces adhesion and improves wear resistance, which in practical terms means longer in-process life and fewer tool changes. For shops running mixed batches or changing setups frequently, this insert offers measurable gains in uptime and process stability without sacrificing surface quality. Secure system fit and straightforward handling for production environments As an ISO-standard insert, compatibility with holders depends on form, relief angle and tolerance class; the rhombic geometry with an 80° included angle and a central hole supports stable clamping and exact seating in standard toolholders. The plate has a thickness of 4.76 mm and uses a 0° relief angle, which affects how the insert engages the workpiece and how cuts are supported. Clear specification of these parameters simplifies tool selection and reduces setup time on lathes and bar-feed machines. Better chip control and extended edge life for cost-effective turning The double-sided chipbreaker provides controlled chip formation in a range of cutting conditions, improving coolant access and reducing rework caused by poor chip evacuation. The combination of carbide substrate and PVD finish helps maintain a stable cutting edge during medium-duty turning, resulting in a consistent surface finish and predictable tool-change intervals. This reliability supports planning for tool inventories and contributes to a lower cost per component over production runs. Practical applications and selection guidance for machinists Intended for turning operations, this insert suits both external and internal machining where stainless steels are predominant. The 0.4 mm nose radius favours fine finishing and dimensional control on turned parts; for roughing or heavier cuts, a different radius or an alternative chipbreaker should be chosen. When matching to a holder, verify form, thickness and fastening method to ensure correct seating. For additional application data or recommendations on holder pairing, technicians at Metav Werkzeuge can provide tailored support. Contact Metav Werkzeuge for tailored application advice or to request matching holder recommendations for the Tungaloy CNMG090404 AH6225 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903168 SKU: 6903168-Tungaloy Manufacturer SKU: TUN6903168 Manufacturer: Tungaloy Model series: ISO turning inserts Grade: AH6225 Material: Carbide ISO designation: CNMG090404 Type: Turning insert Facts Included angle: 80° Nose radius: 0.4 mm Relief angle: 0° Plate thickness: 4.76 mm Size: 09 ISO code: 090404 Special features Rhombic plate form Central cylindrical hole Double-sided chipbreaker PVD-coated carbide grade Suited for turning of stainless steels Reusable indexable geometry FAQ What materials is this insert suitable for? This insert is supplied in the AH6225 grade and is optimised for machining stainless steels, offering a balance between sharpness and wear resistance. How does the PVD coating affect performance? The PVD-coated carbide combination increases wear resistance and reduces adhesion, which improves tool life and maintains cutting performance for the CNMG090404 AH6225 turning insert. Can the insert be used for internal and external turning? Yes, the insert geometry and mounting via the central hole allow both external and internal turning applications when paired with an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Take advantage of a proven combination of PVD-coated cemented carbide AH6225, an 80° rhombic CNMG form and a 0.4 mm nose radius for reliable mid-range machining of stainless steel; order the CNMG090404 AH6225 insert directly via Metav Werkzeuge or contact our consultants for tailored advice. CNMG090404 AH6225 CNMG indexable turning insert for Drehen by Tungaloy — PVD-coated carbide, 0.4 mm radius The CNMG090404 AH6225 is an ISO rhombic indexable turning insert designed for external and internal turning, optimised for machining stainless steel with a sharp yet stable cutting edge. ISO rhombic CNMG 80° geometry PVD-coated cemented carbide AH6225 0.4 mm nose radius for accurate profiling Double-sided chipbreaker with cylindrical hole Consistent cutting performance and prolonged tool life The insert combines a PVD-coated surface with a robust cemented carbide core in grade AH6225, delivering a balanced mix of edge sharpness and stability that supports medium machining operations. The coating reduces built-up edge and improves wear resistance under variable conditions, which translates into more predictable tool life and fewer unscheduled indexings. For manufacturers seeking reduced cycle-time variation, the combination of grade and geometry contributes to reliable part quality and repeatable results when tackling stainless steel. Interchangeability and secure clamping in ISO tool systems Compatibility with standard holders is governed by insert form, relief angle, tolerance class, fastening and thickness; this ISO-normed CNMG insert fits common CNMG-compatible external holders and boring bars when these parameters match. The design includes a cylindrical hole for positive location and stable clamping, which simplifies tool setting and reduces run-out risk. As a result, workshop setups become more consistent, changeover times decrease and process stability improves, supporting higher first-pass yield in small- to medium-batch production. Application advantages for efficient stainless steel turning With an 80° geometry and a 0.4 mm nose radius, the insert offers a robust cutting profile that resists chipping while allowing precise contouring. The double-sided chipbreaker enables two effective cutting edges per index, increasing economic life per insert and lowering tooling costs. This insert is especially suitable for diverse turning tasks — from finishing to light roughing — where stainless steel is involved and where stable chip control and surface finish matter. For complex material mixes or special machining strategies, further technical guidance is available from Metav Werkzeuge to match chipbreaker and cutting data to the workpiece. Contact Metav Werkzeuge for precise tooling recommendations on the Tungaloy CNMG090404 AH6225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and cutting data Technical Data Manufacturer article number: 6966096 Manufacturer SKU: TUN6966096 SKU: 6966096-Tungaloy Designation: CNMG090404 AH6225 Tungaloy insert Numbers / Core technical data Insert size: 09 Thickness: 4.76 mm Geometry angle: 80° Relief angle: 0° Nose radius: 0.4 mm Special features PVD-coated cemented carbide (AH6225) ISO-indexable turning insert (CNMG) Rhombic shape, double-sided chipbreaker Cylindrical hole for secure clamping Suited for machining stainless steel Typical use: external and internal turning FAQ Which materials is this insert suited for? The CNMG090404 AH6225 insert from Tungaloy is optimised for stainless steel; its grade and coating offer good edge stability and wear resistance for a broad range of stainless steel turning tasks. How is compatibility with toolholders ensured? Compatibility depends on the ISO CNMG form, relief angle, tolerance class, fastening method, size and thickness; a matching CNMG-compatible holder or boring bar is required for correct clamping of the CNMG090404 AH6225. What benefits does the AH6225 grade provide? AH6225 is a PVD-coated cemented carbide grade designed to provide a sharp yet stable cutting edge at medium cutting conditions, improving surface finish and process reliability when machining stainless steel. Can this insert be used for both external and internal turning? Yes, the CNMG090404 AH6225 is suitable for both external and internal turning applications when mounted in the appropriate CNMG-compatible holder. What does the 0.4 mm nose radius influence? A 0.4 mm nose radius balances edge strength and profile accuracy, offering improved surface finish over larger radii while maintaining sufficient robustness for mid-range cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6225 Wendeplatten - Tungaloy
Take advantage of precise geometry and a wear-resistant PVD coating to maintain production consistency and reduce tool changes; the combination of an 80° rhombic design and a double-sided chipbreaker supports stable chip control and reliable performance for rostfreier Stahl turning. Order the insert via Metav Werkzeuge or consult our specialists for application-specific advice. CNMG090404 AH6225 — ISO-indexable turning insert for turning (Tungaloy) The CNMG090404 AH6225 is an ISO-indexable turning insert designed for external and internal turning operations, delivering a sharp yet resilient cutting edge for medium machining of rostfreier Stahl and similar materials. PVD-coated carbide grade AH6225 Rhombic 80° geometry with cylindrical hole Double-sided chipbreaker for stable chips Corner radius 0.4 mm, 4.76 mm thickness Enhanced process stability through geometry and grade The rhombic 80° geometry combined with a 0.4 mm corner radius delivers consistent engagement and predictable cutting forces, which is especially beneficial for medium steel-turning applications. The PVD-coated carbide composition of the grade provides improved wear resistance under variable cutting conditions, so the tool maintains edge integrity over longer periods. These characteristics translate into fewer interruptions for regrinding or replacement and steadier machining results in series production. Reliable chip control and predictable tool life A double-sided chipbreaker supports controlled chip formation across a range of feeds and depths, reducing the risk of entanglement and stabilising surface finish. The coating system on this grade is optimised to protect the substrate while preserving a sharp cutting edge, enabling efficient metal removal without sacrificing edge stability. For operations on rostfreier Stahl, the combination of chip control and edge protection helps avoid work hardening and minimises the need for secondary finishing—an efficiency gain for busy workshops. Simple integration with ISO tooling systems Designed as an ISO-standard insert, the component fits holders compatible with form, relief angle, tolerance class, fastening, size and thickness criteria; the cylindrical hole allows secure clamping and straightforward indexing. The insert’s 4.76 mm thickness and rhombic shape suit a wide range of external and internal turning holders. Clear dimensional standards reduce setup time and support rapid replacement during tool changes, contributing to reduced machine downtime and easier inventory management. Efficiency and quality benefits for everyday production By combining a wear-resistant coating with a geometry aimed at stability, this insert balances cutting performance and service life to deliver measurable cost benefits over time. The design is particularly suited to medium-duty turning where surface finish and repeatability are priorities. Choosing this grade supports consistent part quality while keeping maintenance predictable—helpful for scheduling and process planning in production environments. Discuss your application with Metav Werkzeuge and request the Tungaloy CNMG090404 AH6225 insert for optimised rostfreier Stahl turning; technical advice and order assistance are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6946679 Manufacturer: Tungaloy Manufacturer SKU: TUN6946679 SKU: 6946679-Tungaloy Facts Thickness: 4.76 mm Corner radius: 0.4 mm Insert size: 09 Cutting angle: 80° Relief angle: 0° Special features PVD-coated carbide grade AH6225 Double-sided chipbreaker Rhombic geometry Cylindrical hole for clamping ISO-indexable turning insert Suitable for external and internal turning FAQ What materials is this insert best suited for? The AH6225 grade insert is formulated for machining rostfreier Stahl and performs well in medium turning operations where a sharp, stable cutting edge is required. How is chip control achieved with this insert? Chip control is provided by the double-sided chipbreaker design, which promotes consistent chip formation across typical feeds and depths for turning. Is this insert compatible with standard ISO holders? Yes, the CNMG090404 conforms to ISO indexable insert dimensions and secures via a cylindrical hole; compatibility depends on holder form, clearance angle and clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH6235 Wendeplatten - Tungaloy
Combining the PVD-coated AH6235 grade with a 0.4 mm corner radius and a double-sided chipbreaker delivers stable chip formation and reliable performance in stainless-steel turning; order the insert directly via Metav Werkzeuge or request advice from our consultants for optimal grade and holder matching. CNMG090404 AH6235 ISO turning insert for external and internal turning — Tungaloy A CNMG090404 AH6235 ISO-standard indexable insert designed for robust external and internal turning, optimised for stainless steel and interrupted cuts. PVD-coated carbide AH6235 grade Optimised for stainless steel and interrupted cuts Double-sided chipbreaker for stable chip control 0.4 mm corner radius, rhombic CNMG form High-process stability for stainless-steel turning The insert is engineered to support consistent results when machining stainless steel under challenging conditions. The PVD-coated carbide substrate of the AH6235 grade offers a balance of toughness and wear resistance, making it suitable for interrupted cuts and applications with increased risk of chipping. By combining a robust substrate with a tailored coating, the geometry maintains edge integrity over longer cycles, which reduces unplanned tool changes and contributes to a steadier production flow. The rhombic CNMG form with a 0.4 mm corner radius helps distribute cutting forces and supports repeatable dimensional accuracy. Predictable chip control and extended service life A clearly defined double-sided chipbreaker on this indexable insert promotes uniform chip formation and evacuation, which is particularly beneficial in variable feed and depth conditions. The 0° clearance angle and the CNMG090404 geometry ensure compatibility with a broad range of ISO holders; secure clamping is supported by the cylindrical hole design. These features together reduce the incidence of built-up edge and edge breakout, delivering smoother surface finishes and fewer rejects. The combination of chip control and the AH6235 grade leads to a measurable improvement in machining uptime and tool-life stability. Easy integration into ISO tool systems and efficient inventory management Being an ISO-standard insert simplifies selection of a matching external holder or boring bar: form, clearance, tolerance class, fixing method, size and thickness are the determining factors for compatibility. The plate’s 4.76 mm thickness, CNMG rhombic form and standard designation streamline stock-keeping and replacement procedures. For workshops running mixed materials, the insert’s versatility in handling interrupted cuts alongside stainless steels reduces the need for multiple specialised grades, supporting more economical tooling strategies and faster tool-change routines. For precise guidance on integrating the Tungaloy AH6235 CNMG090404 insert into specific turning operations, contact Metav Werkzeuge for technical consultation and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6903349 Manufacturer SKU: TUN6903349 Our SKU: 6903349-Tungaloy Model series: ISO indexable turning inserts Core dimensions Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 09 Lead/approach angle: 80° Relief (clearance) angle: 0° Features & materials Carbide substrate, PVD-coated (AH6235) Double-sided chipbreaker Rhombic plate form (CNMG) Cylindrical hole for secure clamping ISO-standard designation CNMG090404 Suitable for stainless steel and interrupted cuts FAQ What materials is this insert suitable for? The CNMG090404 AH6235 Tungaloy insert is particularly suitable for stainless steel and for operations with interrupted cuts, thanks to the tough PVD-coated carbide grade. How does the AH6235 grade affect performance? AH6235 provides a balance of toughness and wear resistance; with the CNMG geometry it improves edge stability and reduces the risk of chipping in demanding turning tasks. Is the plate compatible with standard CNMG holders? Yes, the ISO designation and the rhombic CNMG form ensure compatibility with matching ISO external holders and boring bars when the holder matches form, size and clamping specifications. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker on this insert promotes consistent chip formation and evacuation, which supports better surface quality and fewer interruptions in production. Which dimensions are critical when selecting a replacement? Key dimensions to match are the plate size (09), corner radius (0.4 mm), thickness (4.76 mm) and the CNMG form; confirming these ensures secure clamping and correct cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 carbide for heat-resistant alloys, the 0.4 mm corner radius for precise edge control and the ISO rhombic format for broad holder compatibility — all designed to maintain production stability and predictable tool life. Order the CNMG090404 AH8015 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 090404 AH8015 — ISO rhombic turning insert by Tungaloy for turning applications The CNMG090404 AH8015 Tungaloy insert is an ISO-standard rhombic turning insert with PVD-coated carbide, engineered for reliable performance in the machining of heat-resistant alloys and general turning tasks. PVD-coated carbide grade AH8015 ISO rhombic CNMG 09 format 0.4 mm corner radius for precision Double-sided chipbreaker, through-hole fix Consistent performance on heat-resistant alloys and mixed production The PVD-coated AH8015 grade combines wear resistance with edge stability, making it well suited for the machining of heat-resistant alloys and other demanding materials. The coating promotes a controlled microgeometry at the cutting edge, which reduces adhesion and thermal softening during extended cycles. Such properties translate into fewer unplanned tool changes, a steadier surface finish and more predictable tool life — factors that improve throughput and help meet production targets without compromising component quality. Easy integration into ISO tooling systems for productivity gains Designed to the ISO CNMG form, this rhombic insert benefits from full compatibility with standard external and internal turning holders when the holder’s form, clearance angle, tolerance class, clamping method, size and thickness match. The double-sided chipbreaker extends the usable edge life, while the through-hole (cylindrical hole) enables secure clamping and straightforward indexing. These design choices support efficient chip control and rapid index changes, which together reduce downtime and simplify tool management in a production environment. Practical edge geometry and handling guidance for reliable results With a 0.4 mm corner radius and a 0° relief angle, the insert delivers a balance between fine finishing and moderate-strength cutting. The small radius assists in producing consistent surface quality on small to medium depth cuts, while the reputable grade helps maintain edge integrity under intermittent higher thermal loads. For best results, match the chipbreaker style and grade selection to workpiece stability and feed/speed strategy; adequate clamping and correct holder geometry are essential to exploit the insert’s full benefits in both roughing and finishing cycles. Contact Metav Werkzeuge for tailored application advice and to secure the Tungaloy AH8015 CNMG090404 insert for your production needs Technical data Article number: 6946671 Manufacturer SKU: TUN6946671 Our SKU: 6946671-Tungaloy Model series: ISO turning inserts Core specifications Designation: CNMG090404 Grade/sort: AH8015 Insert size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Hole style: cylindrical through-hole Included angle: 80° Materials & features Material: carbide (PVD-coated) Application: turning (external and internal) Chipbreaker: double-sided Cutting edge stability and wear resistance ISO-compatible rhombic insert Compatibility: suitable holders and clamping sets FAQ What materials is this insert optimised for? The CNMG090404 AH8015 insert is optimised for heat-resistant alloys and general turning applications; the AH8015 grade provides balanced wear resistance and edge stability. Can this insert be used for both external and internal turning? Yes, the ISO rhombic format and through-hole clamping make the insert suitable for both external and internal turning when paired with the correct holder geometry. How does the 0.4 mm corner radius affect the machining result? A 0.4 mm corner radius provides a compromise between surface finish and edge strength, improving finish on lighter cuts while still tolerating moderate cutting forces. What does the 0° clearance angle require from the toolholder? A 0° clearance angle requires a holder designed to provide the correct relief and support; correct holder selection ensures stable cutting and prevents premature edge chipping. Is the grade AH8015 suited to high-temperature cutting? The PVD-coated AH8015 grade is specified for heat-resistant alloys and offers thermal stability and wear resistance suitable for higher temperature applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com