Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Benefit from a robust combination of precise geometry and a wear-resistant carbide grade: the PVD-coated AH8015 offers a balanced mix of edge stability and wear resistance for efficient turning of heat-resistant alloys, while the CNMG rhombic form and 0.4 mm corner radius support reliable dimensional control. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. CNMG 090404 AH8015 turning insert by Tungaloy — PVD-coated carbide, rhombic 09 The CNMG090404 AH8015 is an ISO indexable turning insert designed for general turning of heat-resistant alloys and for a wide range of external and internal turning operations. PVD-coated AH8015 carbide grade Rhombic 09 geometry, CNMG form 0.4 mm corner radius for controlled cutting Double-sided insert with cylindrical hole Boosted productivity with a balanced carbide grade The insert’s PVD-coated carbide substrate in grade AH8015 is engineered for a compromise between wear resistance and cutting-edge stability, making it a practical first choice for machining heat-resistant alloys. The protective coating reduces adhesive wear and helps preserve the cutting edge at elevated temperatures, which translates into longer effective tool life and fewer indexings. In production settings this balance lowers downtime and improves process stability, supporting a predictable rate of component output and reduced tooling costs per part. Precise geometry for consistent turning performance Manufactured to the ISO indexable insert standard 090404, the rhombic CNMG shape with an included angle of 80° delivers a dependable cutting profile for both facing and turning. The 0° clearance and a 0.4 mm corner radius provide a defined contact condition that improves part finish and repeatability when paired with a suitable toolholder. The insert is double-sided and features a cylindrical hole for secure clamping; its 4.76 mm thickness contributes to rigidity under typical cutting parameters. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness — matching these parameters ensures correct seating and clamping force for safe, repeatable turning. Practical system advantages and recommended use As an ISO-format indexable solution, the insert is intended to be used with an appropriate external holder or boring bar, together with a shim/retention set and replacement fastening screws; this system approach simplifies insert changes and supports consistent tool positioning. Selection of a suitable chipbreaker and the AH8015 grade should be aligned with the workpiece material, machining type and machine/tooling rigidity to achieve optimal chip control and surface quality. The economical nature of an indexable, double-sided insert means that component production can be scaled without frequent, time-consuming tool regrinds — a tangible efficiency gain for jobbing and series production alike. For application guidance or to order the CNMG 090404 AH8015 by Tungaloy, contact Metav Werkzeuge for tailored recommendations and direct procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6946821 Manufacturer SKU: TUN6946821 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Thickness: 4.76 mm Size: 09 Included angle: 80° Clearance angle: 0° Special features Grade/coating: AH8015, PVD-coated carbide Shape: Rhombic, CNMG Double-sided insert Cylindrical hole ISO designation: 090404 Application: Turning FAQ What materials is this insert best suited for? The PVD-coated AH8015 grade is optimised for machining heat-resistant alloys and offers a versatile balance of wear resistance and edge stability for general turning applications. How does the CNMG geometry affect holder selection? The CNMG rhombic form, 80° included angle and 0° clearance require a matching ISO-compatible holder whose form, tolerance class and fastening correspond to the insert’s dimensions for secure clamping and accurate positioning. Is the insert reversible and how many cutting edges are available? The insert is double-sided, providing two usable cutting edges per side depending on indexability and correct orientation in the compatible holder; this improves economy compared with single-edge solutions. Which chipbreaker should be chosen for reliable chip control? The chipbreaker must be selected according to the workpiece material, machining type and machine/fixture rigidity; pairing the AH8015 grade with an appropriate double-sided chipbreaker yields improved chip formation and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of balanced wear resistance and PVD-coated carbide for consistent, productive turning of heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. CNMG090404 AH8015 Turning indexable insert by Tungaloy, PVD-coated carbide A CNMG090404 AH8015 indexable insert designed for external and internal turning, optimised for machining heat-resistant alloys with reliable chip control and stable cutting-edge performance PVD-coated carbide grade AH8015 Suitable for heat-resistant alloys Double-sided chipbreaker geometry Rhombic CNMG shape, 0.4 mm corner radius Productivity through optimised grade and coating The PVD-coated AH8015 grade combines wear resistance with cutting-edge stability to extend tool life during continuous turning operations. This composition is especially suited to high-temperature alloys where flank wear and edge chipping are common; the result is fewer tool changes and more consistent cycle times. The PVD-coated surface reduces built-up edge and improves surface finish, converting material properties into measurable gains in throughput and repeatability. System compatibility and safe clamping Designed to the ISO series for indexable inserts, the geometry and dimensions ensure straightforward integration into standard external holders and boring bars. Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the insert features a 0° clearance, a cylindrical clamping hole and a plate thickness of 4.76 mm, enabling secure fastening and predictable seating. Choosing the correct holder and clamping hardware translates directly into process stability and predictable part quality. Application-oriented geometry for reliable chip control The rhombic CNMG form with an 80° cutting orientation and a 0.4 mm corner radius provides versatility across finishing and semi-finishing tasks. The double-sided chipbreaker geometry supports efficient chip formation when machining demanding alloys, reducing recutting and heat concentration at the cutting edge. The insert’s central cylindrical hole simplifies clamping while its double-sided design allows economical index changes, contributing to a lower cost per edge and uninterrupted production. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts and to request the CNMG090404 AH8015 with matching holders; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966097 SKU: 6966097-Tungaloy Manufacturer SKU: TUN6966097 Brand: Tungaloy Key measurements ISO designation: CNMG090404 ISO code: 090404 Insert size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 80° Double-sided: yes Materials & special features Material: carbide Grade/coating: AH8015 (PVD-coated) Chipbreaker: double-sided Hole style: cylindrical hole Plate form: rhombic Model series: ISO turning indexable inserts Typical application: external and internal turning of heat-resistant alloys FAQ What materials is this insert best suited for? The CNMG090404 AH8015 insert by Tungaloy is optimised for machining heat-resistant alloys; the AH8015 grade balances wear resistance and edge stability to perform well on high-temperature materials. How does the insert clamp in standard holders? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; the insert’s cylindrical hole and standard CNMG geometry allow secure clamping in compatible ISO holders and boring bars. Can the insert be used for both external and internal turning? Yes, the rhombic CNMG shape and chipbreaker design make it suitable for both external turning and internal boring when the correct holder and cutting parameters are applied. What benefits does the PVD coating provide? The PVD coating on the AH8015 grade reduces built-up edge, improves surface finish, and enhances wear resistance, which leads to longer edge life and more consistent production results. Is the insert reversible or indexable? This is a double-sided indexable insert; both sides can be used, allowing economical edge changes and reduced tooling costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Reliable turning performance achieved through the PVD-coated AH8015 grade and ISO‑standard geometry combines wear resistance with stable cutting edges; the double-sided CNMG090404 design with a 0.4 mm corner radius supports efficient external and internal turning. Order the CNMG090404 AH8015 turning insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG090404 AH8015 Turning insert (PVD-coated, double-sided) by Tungaloy A CNMG090404 AH8015 ISO rhombic insert for turning, engineered for reliable machining of heat‑resistant alloys in external and internal turning operations ISO‑standard rhombic insert CNMG PVD‑coated carbide AH8015 Double‑sided with 0.4 mm radius Cylindrical hole, compatible holders Consistent chip control and predictable tool life The PVD‑coated AH8015 grade offers a balance between wear resistance and edge stability, making it well suited to the machining of heat‑resistant alloys. The coating reduces flank wear and improves high‑temperature performance, which extends component life and reduces unexpected downtime. In practical terms, this means fewer insert changes per shift and a more consistent surface finish when turning demanding materials. Fast integration into ISO toolsets Designed to the ISO‑standard CNMG geometry, the insert fits a wide range of external holders and boring bars once the form, relief angle, tolerance class, clamping method, size and thickness are matched. Compatibility is determined by these parameters rather than brand names; selecting a matching holder and correct clamp ensures repeatable seating and safe torque transmission. For workshop planning, this facilitates rapid tool changeover and reduces setup time. Stable cutting geometry for reliable results The rhombic shape with an 80° included angle, 0° relief angle and 0.4 mm corner radius provides a robust profile for general turning. The double‑sided configuration doubles the available cutting edges per insert, improving cost efficiency under stable cutting conditions. Stability in the cutting zone reduces vibration and produces consistent dimensional accuracy on both external profiles and internal bores. Clear application focus and efficiency gains Intended primarily for turning, the insert performs in both external and internal operations when paired with an appropriate chipbreaker and grade for the workpiece and cutting conditions. Choosing the matching chipbreaker and the AH8015 grade yields optimised chip formation and surface quality for heat‑resistant alloys. The predictable behaviour of the grade supports planning for tool consumption and production output, contributing to improved overall process reliability. For high process reliability with Tungaloy AH8015 inserts, contact Metav Werkzeuge for tailored selection and fast supply: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6946705 Manufacturer SKU: TUN6946705 SKU: 6946705-Tungaloy Designation: CNMG090404 AH8015 Model series: ISO turning inserts Facts Corner radius: 0.4 mm Relief angle: 0° Insert size: 09 Thickness: 4.76 mm Included hole: cylindrical Included angle: 80° Special features Material: carbide Coating: PVD Grade: AH8015 Double‑sided chipbreaker Rhombic CNMG form With cylindrical hole Application: turning (external & internal) ISO‑standard compatibility FAQ What materials is this insert suitable for? This CNMG090404 AH8015 Tungaloy insert is intended as a first choice for the general machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. How does the AH8015 grade improve tool life? The PVD coating and the AH8015 carbide composition on the CNMG090404 insert reduce high‑temperature flank wear and help maintain a stable cutting edge, which together extend usable tool life. Which holder features must be checked for compatibility? Compatibility requires matching form, relief angle, tolerance class, clamping method, size and thickness; using a holder designed for CNMG inserts ensures secure seating and repeatable performance with this Tungaloy insert (SKU 6946705‑Tungaloy). Can the insert be used for both external and internal turning? Yes; the rhombic CNMG geometry, double‑sided design and 0.4 mm corner radius allow the insert to be used for both external profiles and internal bores when the correct chipbreaker and holder are selected. How many cutting edges are available per insert and what is the benefit? The double‑sided CNMG090404 design provides multiple cutting edges per insert, effectively improving cost efficiency under consistent machining conditions and reducing tool change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated carbide grade AH8015, ISO CNMG090404 geometry and a 0.4 mm corner radius for efficient, reliable turning of heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. CNMG 090404 AH8015 turning insert by Tungaloy — PVD‑coated carbide, 0.4 mm radius A CNMG 090404 AH8015 indexable turning insert designed for general turning of heat‑resistant alloys, compatible with ISO‑standard holders and intended for both external and internal turning operations ISO CNMG090404 geometry, rhombic shape PVD‑coated carbide grade AH8015 0.4 mm corner radius for consistent finishes Double‑sided chipbreaker, cylindrical hole Proven wear resistance for heat‑resistant alloys The PVD‑coated carbide grade AH8015 provides a balanced combination of wear resistance and cutting‑edge stability, making it a reliable choice for the general machining of heat‑resistant alloys. This grade is engineered to maintain edge integrity under elevated cutting temperatures, which helps to extend tool life and reduce unplanned tool changes. The result is a more predictable machining window and improved process efficiency in serial production. Consistent chip control and secure clamping A double‑sided chipbreaker and a cylindrical hole ensure repeatable chip formation and stable engagement with clamping systems. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; consequently, the insert is intended for use with ISO‑standard external holders, shims and fixing screws. Stable chip evacuation and firm clamping together reduce machining interruptions and contribute to steady cycle times. Geometry tailored for surface quality and flexibility The insert’s 80° rhombic form and 0.4 mm corner radius provide a compromise between robustness and fine surface finish, while the 0° clearance supports close control of the cut on light to moderate depths. A plate thickness of 4.76 mm and the rhombic outline permit reliable orientation in common CNMG pockets, offering versatility across finishing and light‑to‑medium roughing tasks. The geometry therefore supports consistent component quality with fewer secondary operations. Practical benefits for production environments Specified as a first choice for general turning of high‑temperature alloys, the design offers both operational stability and ease of integration into existing tool systems. Fewer tool changes and improved edge life translate into lower downtime and steadier output, enhancing overall productivity. When combined with correctly matched holders and cutting data, the insert supports cost‑effective machining and repeatable part quality across batches. For application advice or to secure supply of the Tungaloy CNMG090404 AH8015 turning inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: 6750463 Manufacturer SKU: TUN6750463 SKU: 6750463-Tungaloy Model series: ISO turning inserts Material: carbide Facts ISO designation: CNMG090404 Insert size: 09 Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 80° Special features Grade: AH8015 (PVD‑coated) Double‑sided chipbreaker Rhombic plate form Cylindrical hole (with hole) Intended use: turning (external and internal) System components: ISO insert, matching external holder, shim/clamping set, replacement screws FAQ Which materials are suitable for this insert? The CNMG090404 AH8015 insert by Tungaloy is specified for the general machining of heat‑resistant alloys and is balanced between wear resistance and edge stability for such materials. Is the insert compatible with standard ISO holders? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening and thickness; the CNMG090404 geometry is made for ISO‑standard external holders and appropriate clamping kits. Can the insert be used for both finishing and light roughing? Yes, the 0.4 mm corner radius and 80° rhombic form permit use across finishing and light‑to‑medium roughing operations when paired with suitable cutting data. Is the insert reversible and how many cutting edges are available? The CNMG090404 AH8015 is double‑sided with a chipbreaker on both sides, providing multiple usable cutting edges per insert and cost‑efficient indexable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
High wear resistance and stable cutting-edge performance combined with efficient chip control make this indexable insert a dependable choice for turning operations on heat‑resistant alloys. The PVD‑coated carbide substrate and double‑sided design deliver balanced economy and reproducible results — order directly via Metav Werkzeuge or consult our specialists for process matching. CNMG090404 AH8015 ISO rhombic turning insert — PVD‑coated carbide by Tungaloy The CNMG090404 AH8015 is an ISO rhombic indexable insert designed for external and internal turning, optimised for machining heat‑resistant alloys with stable chip control. PVD-coated carbide for heat-resistant alloys ISO rhombic CNMG geometry, 80° cutting edge Double-sided chipbreaker for stable chip control Cylindrical hole and 0.4 mm corner radius Maximised productivity with consistent edge life The combination of a PVD‑coated surface and a robust carbide substrate means prolonged service intervals and reproducible component quality. The selected coating grade AH8015 provides a balanced mix of wear resistance and edge stability, which reduces the frequency of insert changes and supports uninterrupted production runs. This results in measurable cycle‑time savings and fewer tool interventions when machining demanding alloys. Seamless integration into ISO tool systems Designed to ISO dimensions, the CNMG090404 form ensures compatibility with standard holders when form, relief angle, tolerance class, fastening and thickness are matched. The 80° lead angle and 0° relief are well suited to general turning tasks, while the 0.4 mm corner radius helps achieve good surface integrity without excessive cutting forces. The insert thickness of 4.76 mm and the cylindrical hole guarantee secure clamping and positional repeatability in the toolholder. Reliable chip control for demanding materials The double‑sided chipbreaker geometry was chosen to manage chips effectively during both external and internal turning. For heat‑resistant alloys, controlled chip formation reduces built‑up edge and stabilises cutting temperatures, supporting longer tool life and more consistent surface finishes. The design delivers predictable chip flow, facilitating automated swarf handling and safer machining cycles. Contact Metav Werkzeuge today for application advice on Tungaloy turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss process parameters and holder compatibility Technical Data Manufacturer: Tungaloy Manufacturer article number: 6793717 Manufacturer SKU: TUN6793717 Supplier SKU: 6793717-Tungaloy Core dimensions and geometry Geometry: CNMG090404 Size: 09 Thickness: 4.76 mm Corner radius: 0.4 mm Lead angle: 80° Relief angle: 0° Hole: with cylindrical hole Materials and features Carbide substrate PVD coating: AH8015 Double-sided chipbreaker ISO rhombic form Application: Turning FAQ What materials is this insert best suited for? The CNMG090404 AH8015 insert is optimised for heat‑resistant alloys, offering a balance of wear resistance and cutting-edge stability for demanding turning tasks. Which geometry and dimensions define the insert? The insert has CNMG090404 geometry (size 09), a thickness of 4.76 mm, a corner radius of 0.4 mm and an 80° lead angle. Is the insert reversible or single‑use? This is a double‑sided indexable insert, so each side can be rotated into the cutting position to extend usable life before disposal. What coating and substrate are used? The insert features a PVD coating in grade AH8015 on a carbide substrate, chosen for a balance of wear resistance and edge stability. How is compatibility with a toolholder ensured? Compatibility depends on matching the ISO form, relief angle, tolerance class, fastening method, size and thickness between holder and insert; if in doubt, Metav Werkzeuge can advise on the correct combination. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 AH8015 Wendeplatten - Tungaloy
Benefit from a PVD‑coated AH8015 carbide grade balanced for wear resistance and edge stability, combined with ISO CNMG geometry for straightforward holder compatibility; these characteristics support steady cycle times and predictable tool life. Order the inserts directly via Metav Werkzeuge or consult the Metav team for application advice. CNMG 090404 AH8015 Tungaloy indexable insert – ISO turning insert for general turning The CNMG090404 AH8015 is a PVD‑coated carbide indexable turning insert designed for external and internal turning of heat‑resistant alloys and general machining tasks. PVD‑coated AH8015 grade ISO CNMG 090404 format Rhombic 80° geometry Double‑sided chipbreaker Engineered for consistent turning performance The insert is manufactured from carbide and finished with a PVD coating, the AH8015 grade providing a measured balance between wear resistance and cutting‑edge stability. This makes it a first choice for machining heat‑resistant alloys, where thermal and abrasive loads can shorten tool life. The PVD‑coated surface increases hardness and improves adhesion of the coating to the substrate, which in practical terms translates into fewer indexings and longer effective tool life. For operations where cycle time and reproducible results matter, the material and coating combination reduce flank wear and maintain dimensional consistency across a production run. Precise geometry for predictable fit and cutting action The ISO CNMG 090404 format denotes a rhombic insert with an 80° included angle and a 0° clearance specification; the corner radius is 0.4 mm, and the plate thickness is 4.76 mm. These geometric parameters determine cutting forces, surface finish and compatibility with ISO‑standard holders. Compatibility with a given holder is governed by insert form, clearance angle, tolerance class, clamping method, size and thickness; the presence of a cylindrical locating hole facilitates secure clamping. Choosing the correct chipbreaker and grade for the workpiece and machine rigidity ensures controlled chip formation and stable cutting, helping to avoid built‑up edge and improve repeatability. Practical shop‑floor advantages and system integration As part of an ISO insert system, the CNMG series works together with a matching external holder or boring bar, a shim/clamping set and replacement screws. The double‑sided chipbreaker increases the number of usable edges per insert, lowering consumable turnover and machine downtime. For small shops and production lines alike, the ability to index inserts quickly and restore cutting performance is a direct contributor to productivity. The insert is suitable for both finishing and general turning operations when the chipbreaker and grade selection are aligned with material and stability requirements, delivering a pragmatic blend of performance and economy in everyday machining. For application support or to request supply of CNMG 090404 AH8015 inserts from Tungaloy, contact Metav Werkzeuge for tailored advice and fast delivery options. Technical data Manufacturer article number: 6966080 SKU: 6966080-Tungaloy Manufacturer SKU: TUN6966080 Model series: ISO‑Drehwendeschneidplatten Core specifications ISO designation: 090404 Insert designation: CNMG090404 Size: 09 (ISO) Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 80° Clearance angle: 0° Features & materials Material: carbide Coating / grade: AH8015 (PVD‑coated) Plate shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Typical application: turning System components: matching holder or boring bar; shim/clamping set; spare screws Intended workpiece focus: heat‑resistant alloys and general machining FAQ Which holders are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; use holders specified for the ISO CNMG 090404 format to ensure proper fit with the CNMG090404 AH8015 indexable insert (SKU 6966080‑Tungaloy). For which materials is the AH8015 grade intended? The AH8015 PVD‑coated carbide grade is designed as a first choice for general machining of heat‑resistant alloys, offering a balance of wear resistance and cutting‑edge stability for demanding thermal and abrasive conditions. What does the double‑sided chipbreaker mean in practice? A double‑sided chipbreaker provides additional usable cutting edges before the insert must be replaced, improving on‑machine availability and reducing consumable changeover time for the CNMG090404 AH8015 inserts. How should the insert be integrated into an existing tool system? Integrate the insert with a matching external holder or boring bar, add the correct shim/clamping set and spare screws; ensure the holder accepts CNMG 090404 geometry and the chosen chipbreaker suits the machining stability and workpiece material. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090404 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet AT9530 for superior surface finish, the ISO-standard CNMG090404 form for easy holder compatibility, and the 0.4 mm corner radius for reliable finishing results; order the insert directly via Metav Werkzeuge or consult the team for application support. CNMG090404 AT9530 indexable turning insert for finishing, Tungaloy The CNMG090404 AT9530 is an ISO-standard indexable insert designed for finishing and light turning of steel, optimised for excellent surface quality and even wear across the cutting edge. ISO-standard rhombic insert, 80° cutting angle Coated cermet grade AT9530 for high surface finish Double-sided chipbreaker, cylindrical hole 0.4 mm corner radius for fine finishing High-quality finishing for steel components The CNMG090404 AT9530 delivers a measured improvement in surface integrity thanks to its coated cermet composition and geometry. The AT9530 grade is formulated for Schlicht- and light machining of steel, emphasising a stable cutting edge and uniform wear patterns that reduce the need for rework. The 0.4 mm corner radius supports consistent part tolerance at finishing feeds, while the rhombic 80° geometry balances strength and access to external and internal contours. This combination results in fewer secondary operations and a predictable finish quality in serial production. Greater process stability and extended tool life A finishing-grade cermet offers higher hot hardness and reduced built-up edge compared with conventional carbides, which supports even wear and steady cutting forces during prolonged runs. The double-sided chipbreaker provides controlled chip formation at finishing parameters, lowering the risk of surface damage and minimising tool-change downtime. Such predictable behaviour contributes to improved uptime and a better cost-per-part ratio when used in precision turning applications. ISO compatibility and practical system integration The insert conforms to ISO indexing and is compatible with appropriate external holders or boring bars when matching form, clearance, tolerance class, fastening and thickness. The item includes a cylindrical hole for secure fastening and a plate thickness of 4.76 mm, with a relief angle of 0° suited to finishing geometries. The complete cutting system comprises the ISO insert, a matching holder or boring bar, the recommended underlay/clamp set and replacement screws; this modular approach simplifies inventory and reduces setup complexity on the shop floor. For specification advice or to source the CNMG090404 AT9530 insert from Tungaloy, contact Metav Werkzeuge for targeted recommendations and ordering at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6773687 SKU: 6773687-Tungaloy Manufacturer item number: 6773687 Manufacturer SKU: TUN6773687 Facts Cutting angle: 80° Relief angle: 0° Thickness: 4.76 mm Corner radius: 0.4 mm Size: 09 Special features Coating / grade: AT9530 Material: cemented carbide (cermet-based grade) Application: Turning (finishing and light machining) Chipbreaker: double-sided Hole style: cylindrical hole Model series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The CNMG090404 AT9530 insert is optimised for finishing and light machining of steel; the AT9530 coated cermet grade emphasises surface quality and consistent wear when used on steel workpieces. Is the insert indexable on both sides? Yes, this indexable turning insert features a double-sided chipbreaker, allowing both sides to be used subject to proper indexing and secure clamping. How does the 0.4 mm corner radius affect part finish? A 0.4 mm corner radius helps produce finer surface finishes and supports tighter dimensional control during finishing passes when using the CNMG090404 AT9530 geometry. Which holder types are compatible with this ISO insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO-standard CNMG090404 shape fits standard external holders or boring bars designed for rhombic 80° inserts. What advantages does the AT9530 coating provide? The AT9530 coated cermet grade improves surface integrity and promotes even wear over the cutting edge, which benefits finishing operations and reduces the frequency of tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 GT9530 Wendeplatten - Tungaloy
Benefit from a combination of high wear resistance and fine-surface performance provided by the GT9530 coated cermet grade and the ISO CNMG geometry; this insert is tailored for stable finishing and light general-purpose turning. Order the CNMG090404 GT9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants for holder compatibility and application support. CNMG 090404 GT9530 ISO turning indexable insert by Tungaloy — coated cermet, 0.4 mm nose radius The CNMG090404 GT9530 Tungaloy insert is an ISO-indexed turning insert designed for external and internal turning where good surface finish and extended tool life are required Coated cermet GT9530 for improved wear resistance Designed for finishing and light general-purpose turning Double-sided chipbreaker for consistent chip control ISO CNMG 090404, 0.4 mm nose radius Consistent finishing and longer tool life with a coated cermet grade The GT9530 grade is a coated cermet engineered for wear resistance and superior surface quality in turning operations on steel. Cermets combine ceramic and metallic phases to produce a cutting edge that resists abrasive wear while promoting a fine finish; this makes the insert especially suitable for finishing passes and light general-purpose turning where stability is ensured. In practice, the grade reduces the frequency of regrinding and tool changes, which supports a smoother production flow and better process economy. Secure fit and rigidity through ISO CNMG geometry The rhombic 80° geometry (ISO CNMG) and a 0.4 mm nose radius provide a balance between edge strength and the ability to achieve fine surface textures. Plate thickness 4.76 mm and the rhombic form increase rigidity during cutting, while the cylindrical hole supports reliable clamping in compatible holders. Compatibility is determined by the insert form, clearance angle, tolerance class, fastening type, size and thickness; selecting a matching holder and clamping set maintains repeatable positioning and consistent cutting performance for serial production. Predictable chips and application guidance for efficient turning The double-sided chipbreaker supports steady chip control for finishing and light turning tasks, helping to avoid entanglement and machine downtime under stable cutting conditions. For machining steel, the GT9530 grade offers improved surface quality, but it performs best when machine stability and cutting parameters are controlled—cermets favour lower to moderate cutting speeds and steady feed to exploit their strength. For advice on choosing the appropriate chipbreaker, holder style or process parameters to match workpiece stability and the intended operation, Metav Werkzeuge provides application support and practical recommendations. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Tungaloy CNMG090404 GT9530 turning insert — technical consultation and order processing are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6797212 Manufacturer SKU: TUN6797212 SKU: 6797212-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Facts ISO designation: 090404 Nose radius: 0.4 mm Plate thickness: 4.76 mm Shape angle: 80° Size: 09 Special features Grade/coating: GT9530 Cutting material type: coated cermet Chipbreaker: double-sided Plate form: rhombic Hole: with cylindrical hole Clearance angle: 0° Typical application: turning (external and internal) FAQ What materials is this insert suitable for machining? The CNMG090404 GT9530 Tungaloy insert is intended primarily for machining steel, offering a wear-resistant cermet grade suited to finishing and light general-purpose turning under stable conditions. How does the ISO CNMG geometry affect holder selection? The ISO CNMG 090404 form requires a compatible rhombic 80° holder; compatibility with the CNMG090404 GT9530 insert depends on form, clearance angle, tolerance class, fastening, size and thickness to ensure correct clamping and repeatable positioning. Is the insert suitable for internal turning operations? Yes, the insert’s rhombic geometry and double-sided chipbreaker allow use in both external and internal turning when the selected holder and setup provide sufficient rigidity for the intended operation. What advantages does the GT9530 coated cermet offer compared with conventional carbide? GT9530 coated cermet provides improved surface finish and enhanced wear resistance for finishing passes; however, the CNMG090404 GT9530 insert performs best in stable cutting conditions and with controlled feeds and speeds. How should the chipbreaker be chosen for different tasks? Selection of the chipbreaker for the CNMG090404 GT9530 should be based on workpiece material, cutting depth and the stability of the setup; the double-sided chipbreaker included provides consistent chip control for finishing and light general-purpose turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of high-quality surface finish, longer tool life and secure ISO compatibility for consistent turning performance; order genuine Tungaloy inserts from Metav Werkzeuge or ask the consultants for advice on the right grade for each application. CNMG 090404 GT9530 Turning Insert — Tungaloy CNMG090404 GT9530 is an ISO-format indexable turning insert engineered for finishing to light‑roughing of steel components, designed for secure clamping in ISO turning holders. Coated cermet grade GT9530 ISO CNMG 09 format for turning 0.4 mm corner radius for fine finishes Cylindrical hole for secure mounting Consistent surface quality under stable conditions The coated cermet GT9530 is formulated to deliver a high-quality surface finish when machining steel under stable cutting conditions. Its combination of wear-resistant coating and cermet cutting material reduces built-up edge formation and supports predictable wear patterns, which translates into fewer rework cycles and improved component consistency. The geometry of the rhombic insert and the 0.4 mm corner radius are tuned to produce fine surface integrity during finishing operations while maintaining adequate edge strength. Secure fit and straightforward holder compatibility Designed to the ISO CNMG090404 designation, the insert matches common ISO turning holders by form, relief angle, tolerance class, fastening method, size and thickness. The cylindrical centre hole and standard clamping interfaces ensure repeatable seating and reliable rigidity in the toolholder, which is essential for stable cutting and longer tool life. Operators and shops benefit from consistent insert positioning and simplified stock management thanks to the standardised format. Optimised grade for steel finishing and longer tool cycles Grade GT9530 is a wear‑resistant, coated cermet intended for finishing to light universal turning of steel when a good surface and extended cutting life are required. The grade’s balance of coating and substrate properties supports excellent flank wear behaviour at moderate cutting speeds, helping to reduce downtime for insert changes. For applications demanding reliable surface finish and cycle economy, this cutting grade offers a practical compromise between productivity and part quality. Practical application notes and selection guidance The insert’s 80° included angle and rhombic shape facilitate versatile approach angles for external and internal turning operations. Use the double‑sided chipbreaker configuration to exploit both cutting edges before indexation, increasing yield per insert. Select the chipbreaker and grade according to the workpiece material, machining stability and desired surface result; in unstable setups a more robust geometry or different grade may be preferable. Indexable inserts of this type integrate into existing ISO tool systems without further modification. For reliable finishing and extended tool life, request advice from Metav Werkzeuge for the Tungaloy CNMG 090404 GT9530 turning inserts or order original parts via Metav Werkzeuge; contact info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data Article number: 6735908 SKU: 6735908-Tungaloy Manufacturer SKU: TUN6735908 Facts Corner radius: 0.4 mm Thickness: 4.76 mm Insert angle: 80° ISO code: 090404 Size designation: 09 Special features Coated cermet grade GT9530 Double-sided chipbreaker Rhombic insert shape (CNMG) Cylindrical centre hole for mounting ISO-format turning insert compatible with standard holders FAQ What materials is this insert recommended for? The GT9530 grade is designed primarily for machining steel; the CNMG 090404 insert from Tungaloy performs well in finishing and light universal turning of steel under stable cutting conditions. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius provides a balance between fine surface finish and sufficient edge strength, making this insert suitable for finishing passes where surface integrity and dimensional control are important. Is the insert reversible and how many cutting edges are available? The CNMG 090404 insert is double-sided with a chipbreaker on both faces, allowing indexation to use multiple cutting edges before replacement. Which holder features are required for correct compatibility? Compatibility is determined by form, relief (0° known relief in this design), tolerance class, fastening method, size and thickness; the cylindrical centre hole supports secure clamping in standard ISO CNMG holders. Can this insert be used for internal turning as well as external turning? Yes, the rhombic geometry and 80° included angle make the insert suitable for both external and internal turning operations when matched with an appropriate holder and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 GT9530 Wendeplatten - Tungaloy
Take advantage of the GT9530 cermet grade and the rhombic CNMG form for dependable finishing and extended tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. CNMG090404 GT9530 indexable turning insert by Tungaloy — coated cermet, 0° clearance CNMG090404 GT9530 is a coated cermet indexable insert designed for precision turning and finishing operations on Stahl where stable setups and excellent surface quality are required Coated cermet GT9530 for long tool life Rhombic CNMG form with 0° clearance angle Double-sided chipbreaker, cylindrical hole Consistent surface finish on Stahl components Precision finishing and extended tool life for turning The coated cermet GT9530 is engineered for wear resistance and superior surface quality in finishing passes. Cermet combines ceramic hardness with metallic toughness, which results in a cutting edge that maintains form under stable cutting conditions; this delivers longer intervals between indexings and reliable, repeatable finishes on Stahl. The grade is optimised for light universal to finishing applications, making it a rational choice when process stability and part quality are priorities. Selecting a cermet for final passes reduces reliance on secondary grinding or polishing and therefore improves throughput. Predictable integration with ISO-compliant toolholders Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the CNMG090404 geometry ensures straightforward integration with standard ISO CNMG holders. The rhombic shape with an included angle of 80°, 0.4 mm corner radius and 4.76 mm thickness provides a balanced contact area that supports stable clamping and consistent cutting forces. The cylindrical hole and double-sided design allow economical use of the insert before replacement, while the ISO standardisation simplifies inventory and reduces setup errors. These measurable parameters deliver process predictability and reduce unplanned downtime. Application guidance and material suitability for efficient production Typical uses include external and internal turning where a smooth surface and extended tool life are required. The double-sided chipbreaker offers controlled chip formation when paired with appropriate feeds and speeds; for best results, match the chipbreaker style and the GT9530 grade to the workpiece material and machining stability. In stable setups, the coated cermet excels at producing high-quality finishes on Stahl components and pays off through reduced tool changes and consistent part quality. For operations with variable stability or heavier interrupted cuts, consider complementing this insert with different grades or geometries tailored to higher toughness. Request tailored cutting data and stock availability from Metav Werkzeuge for Tungaloy GT9530 inserts — contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical assistance and ordering support Technical Data Article number: 6710241 Manufacturer SKU: TUN6710241 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: GT9530 Facts Insert designation: CNMG090404 Corner radius: 0.4 mm Included angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 09 Special features Coated cermet GT9530 Rhombic CNMG form Double-sided chipbreaker Cylindrical hole (with hole) ISO-compliant indexable insert Intended application: Drehen (turning) FAQ What materials is this insert best suited for? The CNMG090404 GT9530 insert is formulated for machining Stahl, offering excellent surface finish and wear resistance for finishing and light universal turning. How does the GT9530 grade improve process reliability? The GT9530 coated cermet provides a wear-resistant cutting edge that extends tool life and yields consistent finishes, which enhances overall process reliability for stable turning operations. Which holder characteristics determine compatibility with this insert? Compatibility is governed by insert form, clearance angle, tolerance class, fastening, size and thickness; matching these parameters to the holder ensures correct clamping and performance of the CNMG090404 GT9530. Is the insert reversible and economical to use? Yes, the double-sided CNMG geometry allows both sides to be used, improving cost-efficiency before the insert requires replacement. What cutting applications suit this insert best? This indexable insert is recommended for external and internal finishing on Stahl where good surface quality and extended tool life are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090404 IC520N Indexable Insert - ISCAR
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Performance features for indexable inserts CNMG 090404 from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-F3PIC520N Facts / Figures: ISO-Code: CNMG090404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC520N with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090404-IC520N-ISCAR 40END
CNMG 090404 IC6015 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for insert CNMG 090404 from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-F3MIC6015 Series: ECO FLASHTURN ISO-Code: CNMG090404 Grade: IC6015 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNMG-090404-IC6015-ISCAR 40END
CNMG 090404 IC6015 Indexable Insert - ISCAR
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing directly by post. Detail specifications CNMG 090404 inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-M3MIC6015 Data & Figures: ISO-Code: CNMG090404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC6015 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CNMG-090404-IC6015-ISCAR 40END
CNMG 090404 IC6025 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications CNMG 090404 insert from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-F3MIC6025 Series: ECO FLASHTURN ISO-Code: CNMG090404 Grade: IC6025 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090404-IC6025-ISCAR 40END
CNMG 090404 IC6025 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for CNMG 090404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-M3MIC6025 Data/ Figures: ISO-Code: CNMG090404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CNMG-090404-IC6025-ISCAR 40END
CNMG 090404 IC804 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications CNMG 090404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-F3SIC804 Series: ECO FLASHTURN ISO-Code: CNMG090404 Grade: IC804 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090404-IC804-ISCAR 40END
CNMG 090404 IC806 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for CNMG 090404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-F3MIC806 Facts and Figures: ISO-Code: CNMG090404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090404-IC806-ISCAR 40END
CNMG 090404 IC806 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product characteristics for indexable inserts CNMG 090404 from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-M3MIC806 Series: ECO FLASHTURN ISO-Code: CNMG090404 Grade: IC806 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090404-IC806-ISCAR 40END
CNMG 090404 IC806 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts CNMG 090404 from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-F3SIC806 Figures for the tool: ISO-Code: CNMG090404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CNMG-090404-IC806-ISCAR 40END
CNMG 090404 IC807 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features for CNMG 090404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-F3PIC807 Facts for the tool: ISO-Code: CNMG090404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNMG-090404-IC807-ISCAR 40END
CNMG 090404 IC807 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Detail specifications CNMG 090404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-F3MIC807 Facts / Figures: ISO-Code: CNMG090404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090404-IC807-ISCAR 40END
CNMG 090404 IC807 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CNMG 090404 from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-M3PIC807 Facts for the tool: ISO-Code: CNMG090404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090404-IC807-ISCAR 40END
CNMG 090404 IC807 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts CNMG 090404 from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-M3MIC807 Series: ECO FLASHTURN ISO-Code: CNMG090404 Grade: IC807 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090404-IC807-ISCAR 40END
CNMG 090404 IC8150 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for CNMG 090404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090404-F3PIC8150 Figures for the tool: ISO-Code: CNMG090404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC8150 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CNMG-090404-IC8150-ISCAR 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com