Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
BCMT160530R-G55 WSP45G Tiger-tec Gold Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the versatile P/M/S material range for high process reliability and long tool life; benefit from the parallel 75° geometry and a 7° clearance that reduce cutting forces and improve surface finish. Order the insert directly via Metav Werkzeuge or request consultancy for application-specific recommendations. BCMT160530R-G55 WSP45G milling insert — Tiger·tec Gold, 7° clearance, 3 mm corner radius (Walter Tools) A versatile BCMT160530R-G55 WSP45G milling insert designed for robust, high-performance milling of steel, stainless steel and heat-resistant superalloys in demanding production environments Tiger·tec Gold PVD coating For steel, stainless steel, superalloys Parallelogram 75° geometry 7° clearance angle 3 mm corner radius Consistent performance across demanding materials The Tiger·tec Gold PVD-coated grade delivers a balance of wear resistance and edge stability, especially under the thermal and mechanical loads typical in milling. As a result, the insert supports stable chip formation and reduced flank wear, which together translate into fewer tool changes and a more predictable production rhythm. The coated cemented carbide substrate is intended for applications across the ISO groups P, M and S, meaning compatibility with unalloyed and alloyed steel, stainless steel and heat-resistant superalloys/titanium. This combination of material suitability and coating technology is engineered to raise effective machining times while maintaining part quality. Geometry engineered to lower forces and improve finish The parallelogram 75° shape and a 7° clearance angle optimise the cutting geometry to reduce radial cutting forces and promote secure chip evacuation. The 3 mm corner radius increases edge strength for interrupted cuts and heavy engagement, offering a compromise between edge robustness and surface finish. These geometry choices contribute to lower vibration sensitivity and a smoother surface on the workpiece, so cycle times and downstream processes can benefit from more consistent tolerances. The insert form and chipbreaker G55 are matched to provide controlled chip shaping in mixed cutting conditions. Operational advantages and process security The WSP45G grade targets practical productivity: a tough PVD-coated insert that tolerates heat buildup and supports repeatable performance in series production. The configuration marked by the BCMT form and the specified tolerance class M allows straightforward integration into common toolholder systems while maintaining the required repeatability for batch production. As a result, shops gain improved uptime and predictable quality, which supports leaner workflows and reduced rework. The insert's design emphasis on stability and broad material coverage underlines Walter Tools’ commitment to reliable, productive tooling solutions. Choose Walter Tools’ Tiger·tec Gold grade for reliable, productive milling — contact Metav Werkzeuge for tailored application advice and fast supply. Technical data SKU: BCMT160530R-G55-WSP45G-WALTER Name: Fräswendeschneidplatte BCMT160530R-G55 WSP45G Type: Milling indexable insert Series: Tiger-tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Size: 16 mm Corner radius: 3 mm Clearance angle: 7° Shape: Parallelogram 75° Tolerance class: M Thickness: 05 Special features Coating/grade: Tiger·tec Gold, PVD-coated carbide Material suitability: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Chipbreaker: G55 Form: BCMT160530R-G55 Variant: T FAQ What materials is this insert suitable for? The BCMT160530R-G55 WSP45G insert is suitable for steel, stainless steel and heat-resistant superalloys/titanium (ISO groups P, M, S), reflecting the Tiger·tec Gold grade suitability. Which geometry features improve stability in interrupted cuts? The parallelogram 75° geometry combined with a 3 mm corner radius and 7° clearance angle provides increased edge strength and reduced cutting forces, enhancing stability in interrupted milling operations. How does the Tiger·tec Gold coating affect tool life? Tiger·tec Gold PVD coating on the WSP45G grade increases wear resistance and supports stable chipping behaviour, which typically extends effective tool life under mixed cutting conditions. Can the insert be used in common BCMT toolholders? Yes, the insert form BCMT160530R-G55 corresponds to standard BCMT toolholder interfaces and the tolerance class M supports repeatable seating in compatible holders. What chip control can be expected with this insert? The integrated G55 chipbreaker is configured to provide controlled chip formation across the specified materials, helping to reduce recutting and improve process reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
BCMT160530R-G55W WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of high process security, targeted chip control and durable coated carbide to keep machining cycles consistent and reduce tool changes; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. BCMT160530R-G55W WSM45X milling insert by Walter Tools — coated carbide for rostfreier Stahl and superalloys, 7° relief The BCMT160530R-G55W WSM45X is a precision indexable milling insert designed for demanding turning and milling tasks in rostfreier Stahl and heat-resistant alloys, offering stable cutting edges and defined chip control for productive machining. Coated carbide grade WSM45X for tough materials 7° relief angle for secure chip control Parallelogram 75° shape with 3 mm corner radius G55W chipbreaker for rostfreier Stahl and superalloys High-performance grade for demanding materials The WSM45X grade is a coated carbide formulation optimised for materials that challenge cutting edges, notably rostfreier Stahl and heat-resistant superalloys (ISO group S and M). Its composition promotes stable chip formation and improved wear resistance, which translates into fewer interruptions for edge dressing or insert changes. For manufacturers focused on consistent component quality and predictable tool life, this insert reduces variability in batch production and supports higher machine utilisation. Geometry engineered for reliable chip control and surface quality The parallelogram 75° platform combined with a 7° relief angle and a 3 mm corner radius provides a balance between strength and accessibility in shoulder and face milling. The G55W chipbreaker is designed to guide chips away from the cutting zone and reduce built-up edge when machining sticky or work-hardening alloys. In practical terms, this geometry helps maintain a cleaner cutting zone, leading to improved surface finish and less secondary finishing work, while the corner radius contributes to edge robustness during interrupted cuts. Clear advantages in machining strategy and tool handling As an indexable insert, this solution supports quick tool replacement and repeatable positioning, cutting downtime and simplifying inventory management for multi-shift operations. The coated carbide surface minimises friction and heat at the tool–workpiece interface, which is particularly important when machining materials with poor thermal conductivity. Selecting the correct insert grade and chipbreaker reduces cycle times and can improve cost-efficiency over the tool life by lowering scrap rates and rework needs. Application guidance and process reliability Use of this insert is recommended where secure chip control and edge stability are priorities—typical applications include heavy-duty profiling, face milling and operations with interrupted cuts in rostfreier Stahl and high-temperature alloys. Cutting parameters should be adapted to material specifics and machine rigidity; the insert’s design supports a range of cutting depths while maintaining tool life. For shops transitioning to more difficult materials, the switch to a dedicated grade such as WSM45X often leads to measurable gains in throughput and consistency. For precise selection and cutting-parameter recommendations for Walter Tools inserts, contact Metav Werkzeuge for tailored advice and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: BCMT160530R-G55W-WSM45X-WALTER Designation: BCMT160530R-G55W WSM45X Type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 3 mm Inscribed circle / size: 16 mm Thickness: 0.5 mm Special features Grade: WSM45X (coated carbide) Chipbreaker: G55W Plate form: Parallelogram 75° Series: Walter Schneidstoffsorte - Serie offen Material suitability: S / M (heat-resistant superalloys, titanium; rostfreier Stahl) FAQ What materials is this insert suitable for? The BCMT160530R-G55W WSM45X insert is intended for machining rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), offering optimized chip formation and edge stability for these materials. Which chipbreaker does the insert use and what is its benefit? The insert features the G55W chipbreaker, which improves chip control and reduces the risk of built-up edge when machining challenging materials, helping to maintain surface quality. What are the key geometric features to consider for setup? Important geometry: parallelogram 75° shape, 7° relief angle and 3 mm corner radius; these factors influence approach angle, strength at the cutting edge and recommended cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160530R-G55W WSP45G Walter Tools
Take advantage of the combination of high process reliability and versatile material coverage offered by this Tiger·tec Gold grade; its 7° clearance and 3 mm corner radius ensure stable cutting edges and predictable chip control for efficient milling. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. BCMT160530R-G55W WSP45G milling indexable insert — Tiger·tec Gold, 7° clearance — Walter Tools The BCMT160530R-G55W WSP45G is a parallelogram 75° milling indexable insert engineered for general-purpose and demanding milling of steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating For steel, stainless steel and superalloys Parallelogram 75° insert geometry 7° clearance, 3 mm corner radius Productivity and durability for mixed machining tasks The Tiger·tec Gold grade delivers a balanced combination of wear resistance and edge toughness, making this insert particularly effective where varying workpiece materials occur. Thanks to the PVD-based WSP45G grade, the cutting edge stays stable under the thermal and mechanical loads typical of milling steel and stainless steel, while also offering adequate heat resistance for superalloys. In practice, this means fewer unplanned tool changes, more consistent cycle times and improved component repeatability when slotting or face milling. Geometry and chip control that support efficient processes The parallelogram 75° form and the defined 3 mm corner radius focus cutting forces and reduce vibration in interrupted or heavy cuts. The built-in chipbreaker G55W promotes predictable chip formation and evacuation, which reduces the risk of built-up edge and improves surface finish. The modest 7° clearance helps preserve the cutting edge in trochoidal and conventional milling cycles, contributing to longer effective tool life and lower tooling cost per part. Application guidance and process optimisation Designed for versatile mill-turn and machining-centre applications, this grade supports a wide range of feeds and cutting speeds. Where high thermal load is expected, the PVD-coated Tiger·tec Gold surface increases thermal stability and wear resistance, while the insert geometry helps maintain dimensional accuracy. For process setup, prefer stable clamping and appropriate coolant strategies to exploit the insert’s strengths in chip control and edge stability. If specific machining parameters are needed, our technical team can provide data for comparable operations. Contact Metav Werkzeuge for application advice and availability of the Walter Tools BCMT160530R-G55W WSP45G insert and discuss optimal cutting parameters for the intended materials Technical Data Article number: BCMT160530R-G55W-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT160530R-G55W WSP45G Walter Tools Facts Clearance angle: 7° Corner radius: 3 mm Insert form: Parallelogram 75° Size: 16 Thickness: 05 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: G55W Applicable materials: steel, stainless steel, heat-resistant superalloys Designation: BCMT160530R-G55W Product type: milling indexable insert Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The BCMT160530R-G55W WSP45G insert is specified for machining steel, stainless steel and heat-resistant superalloys, reflecting the P / M / S applicability of the WSP45G grade. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold provides enhanced thermal stability and wear resistance, which helps the insert maintain a stable cutting edge under higher temperatures and delivers consistent surface quality. What advantages does the parallelogram 75° geometry offer? The 75° parallelogram shape directs cutting forces favourably for face and shoulder milling, improves tool life in interrupted cuts and supports repeatable chip evacuation with the G55W chipbreaker. Can this insert be used for heavy interrupted cuts? Yes, the combination of a robust 3 mm corner radius and the WSP45G grade’s toughness makes the insert suitable for demanding interrupted and semi-finish milling operations. Is this insert compatible with common Walter Tools milling cutters? The BCMT160530R-G55W WSP45G insert matches standard pocket geometries for inserts of this designation; compatibility should be confirmed against the cutter’s pocket and clamping specifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160532R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high productivity, predictable chip control and long tool life for efficient milling of steel and cast iron; order Walter Tools inserts through Metav Werkzeuge or consult our team for application advice. BCMT160532R-G55 WKP35G milling insert — Tiger·tec Gold, for steel and cast iron (Walter Tools) A BCMT160532R-G55 WKP35G indexable milling insert engineered for high-volume machining of steel and cast iron with a focus on repeatable performance and stable cutting conditions Tiger·tec Gold coating for extended tool life WKP35G grade for steel and cast iron machining Parallelogram 75° shape with 3.2 mm corner radius G55 chipbreaker for reliable chip control Reliable productivity through advanced coating and grade The combination of Tiger·tec Gold coating and the WKP35G grade delivers a measurable improvement in wear resistance and process stability during milling. Designed as a coated carbide insert, the grade is optimised for the thermal and abrasive challenges of machining steel and cast iron, so the customer benefits from fewer tool changes and more predictable cycle times. The coating technology reduces flank wear and helps maintain cutting-edge integrity under higher cutting speeds, translating into consistent component quality and lower overall machining costs. Improved chip control and surface quality for efficient cycles A dedicated G55 chipbreaker geometry controls chip form and evacuation, reducing the risk of re-cutting and machine downtime. The Parallelogram 75° shape provides a positive cutting engagement that supports stable cutting forces and a better surface finish on the workpiece. With a 3.2 mm corner radius, the insert balances edge strength and cutting precision, making it suitable for light to medium roughing and profile finishing where both tool life and surface integrity are required. Versatility across steels and cast-iron applications Marked for ISO groups P and K, this insert is suitable for a broad range of unalloyed and alloyed steel as well as cast iron workpieces. The substrate and coating combination is designed to handle the characteristic heat generation in steel and the abrasive, fragmenting chips typical of cast iron. This versatility means fewer grade changes across mixed production runs and improved process reliability when switching between component families. Practical handling and compatibility on common milling platforms The BCMT160532R-G55 designation corresponds to a standard indexable geometry that fits a wide range of cutter bodies and holders. The insert thickness and clearance geometry ensure secure seating and repeatable indexing, which reduces setup time and contributes to traceable, repeatable manufacturing. For manufacturers aiming to streamline tool inventories while maintaining performance, a single high-performance grade can cover multiple processes and toolholders. For demanding milling operations, contact Metav Werkzeuge for application support and to source Walter Tools Tiger·tec Gold inserts to enhance throughput and process reliability — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical Data Article number: BCMT160532R-G55-WKP35G-WALTER Designation: BCMT160532R-G55 WKP35G Manufacturer: Walter Tools Product type: Milling insert Series: Tiger·tec Gold Facts Shape: Parallelogram 75° Size: 16 Corner radius: 3,2 Relief angle: 7° Thickness: 05 Chipbreaker: G55 Tolerance class: M Execution: T Special features Grade: WKP35G (coated carbide) Material suitability: Steel (P) Material suitability: Cast iron (K) Coating technology: Tiger·tec Gold Plate form: Parallelogram Application focus: High productivity milling FAQ What materials is this insert suitable for? The insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron when using the BCMT160532R-G55 WKP35G grade. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating reduces wear and improves edge life under elevated cutting speeds, leading to longer tool life and more consistent cycle times. What is the purpose of the G55 chipbreaker? The G55 chipbreaker shapes chips to aid evacuation and to prevent re-cutting, which improves process stability and surface finish. Is the insert compatible with common cutter bodies? Yes — the BCMT geometry is a standard indexable format and fits numerous milling cutter bodies designed for this insert family. What corner radius is provided and what does it mean for machining? The insert has a 3.2 mm corner radius, offering a balance between edge strength and finishing capability for light to medium milling operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for identification only; there is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product from the manufacturer Walter Tools.
BCMT160532R-G55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, an efficient G55 chipbreaker and a secure parallelogram 75° form to boost milling productivity and process stability. Order the insert directly via Metav Werkzeuge or consult the technical team for application matching and prompt delivery. BCMT160532R-G55 WKP35S — Milling insert, G55 chipbreaker, Tiger·tec Silver (Walter Tools) The BCMT160532R-G55 WKP35S is a parallelogram 75° milling insert engineered for high-productivity machining of steel and cast iron, offering consistent chip control and long tool life. Tiger·tec Silver coating technology Optimised chip control with G55 breaker Parallelogram 75° form for secure clamping Suitable for steel and cast iron machining High productivity through modern coating and grade The combination of the Tiger·tec Silver coating and the WKP35S grade provides a balance of wear resistance and toughness for productive milling operations. The coating reduces flank wear under the thermal loads typical for machining steel, while the base carbide grade maintains a stable cutting edge when encountering interrupted cuts. This results in fewer insert changes and a more predictable machining cycle, supporting higher throughput in series production. Precise chip control for improved surface quality The G55 chipbreaker has been developed to manage the typical chips produced from P (steel) and K (cast iron) materials according to ISO 513. Controlled chip formation reduces re-cutting and improves surface finish, particularly on interrupted or semi-finish passes. The insert geometry with a 3.2 mm corner radius and 7° relief angle contributes to consistent cutting forces and a reliable contact zone between tool and workpiece. Secure clamping and application flexibility The parallelogram 75° plate form provides robust seating and stable cutting conditions in many standard milling holders. With a nominal size of 16, this insert is suitable for a broad range of milling cutters and applications where repeatability and secure clamping are essential. The tolerance class M ensures predictable fit and easy indexability in multi-insert tools, enabling fast tool changes and minimal setup variation. Economic tool life and process reliability The WKP35S grade is tailored to achieve a favourable compromise between wear resistance and edge integrity, helping to reduce total machining costs through longer life and fewer production interruptions. For operations focused on throughput and surface consistency, the combination of Tiger·tec Silver, the G55 chipbreaker and the insert’s geometry supports reproducible results and lower overall tooling consumption. Contact Metav Werkzeuge for specification matching of Walter Tools Tiger·tec Silver inserts and precise delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number / SKU: BCMT160532R-G55-WKP35S-WALTER Label: Fräswendeschneidplatte BCMT160532R-G55 WKP35S Walter Tools Product type: Fräswendeschneidplatte (milling insert) Brand: Walter Tools Facts Size: 16 Corner radius: 3.2 mm Relief angle: 7° Form: Parallelogram 75° Thickness code: 05 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: G55 Material suitability: P (steel), K (cast iron) FAQ Which materials are suitable for this insert? The BCMT160532R-G55 WKP35S is specified for machining P (steel) and K (cast iron) materials according to ISO 513. What does the G55 chipbreaker achieve? The G55 chipbreaker on the insert promotes controlled chip formation and evacuation for improved surface quality and safer chip handling when milling steel and cast iron. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating increases wear resistance and thermal stability of the WKP35S grade, extending tool life in demanding milling cycles. Is the insert compatible with standard 75° parallelogram cutters? Yes, the parallelogram 75° form and the given tolerance class M make this insert suitable for standard milling cutters designed for BCMT-style plates. What operational benefits can be expected from this grade and geometry? Expect consistent cutting forces, improved surface finish, reduced insert changes and greater overall process reliability when using this WKP35S insert with the G55 chipbreaker. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160532R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a robust 3.2 mm corner radius and a universal P/M/S grade for reliable, productive milling results; order the BCMT160532R-G55 WSP45G directly via Metav Werkzeuge or contact our consultants for tailored recommendations. BCMT160532R-G55 WSP45G – indexable milling insert, Tiger·tec Gold, Walter Tools The BCMT160532R-G55 WSP45G is an indexable milling insert engineered for versatile facing and peripheral milling of steel, stainless steel and heat‑resistant alloys in demanding production environments. Tiger·tec Gold PVD coating Universal P/M/S application 7° clearance angle for smooth cutting 3.2 mm corner radius for edge strength Stable cutting performance under heavy load The Tiger·tec Gold PVD technology and the WSP45G grade deliver a balance of wear resistance and edge toughness that supports consistent performance during interrupted and continuous milling. The combination of a coated cemented‑carbide grade and a dedicated substrate reduces flank wear and prolongs edge life, which translates into fewer index changes and lower overall tool costs. This stability is particularly noticeable when machining demanding materials where thermal and mechanical loads fluctuate. Controlled chip formation and improved surface finish The G55 chipbreaker geometry paired with the parallelogram 75° insert form promotes predictable chip control and efficient evacuation. As a result, machining runs show improved surface integrity and reduced risk of built‑up edge on stainless and alloyed steels. The insert’s 7° clearance angle helps maintain a clean cutting action, supporting finer finishes in finishing passes while still allowing aggressive engagement when required. Robust design for extended tool life and repeatability A substantial corner radius of 3.2 mm increases edge strength for productive roughing operations and extends the insert’s useful life during higher radial depths of cut. The tolerance class M ensures consistent geometry between indices, supporting predictable cutting forces and repeatable part quality across multiple index changes. Because the insert is indexable, maintenance downtime is minimised and toolholding costs are optimised. Application guidance and compatibility This grade is optimised for the ISO groups P / M / S, covering unalloyed and alloyed steels, stainless steels and heat‑resistant superalloys or titanium workpieces. The insert’s parallelogram shape and the specified geometry make it suitable for both face milling and peripheral milling when paired with compatible cutters and torque‑rated toolholders. For specific machining parameters and to align the insert with the chosen milling cutter body, consult Metav Werkzeuge’s technical advisors for cutting data and clamping recommendations. For availability, customised tooling solutions or to discuss the BCMT160532R-G55 WSP45G in relation to current production demands, contact Metav Werkzeuge – Metav Werkzeuge GmbH can advise on holder compatibility and delivery times via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BCMT160532R-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT160532R-G55 WSP45G Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Facts Free angle: 7° Corner radius: 3.2 mm Plate size: 16 Plate thickness: 05 Tolerance class: M Special features Grade: WSP45G Chipbreaker: G55 Plate form: Parallelogram 75° Material groups: P / M / S Execution: T ISO designation: BCMT160532R‑G55 WSP45G FAQ What materials is this insert suitable for? The BCMT160532R‑G55 WSP45G is specified for ISO groups P / M / S, making it suitable for steels, stainless steels and heat‑resistant superalloys or titanium workpieces. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold coating on the WSP45G grade enhances wear resistance and cutting‑edge stability, improving tool life and process reliability during both roughing and finishing. What advantage does the parallelogram 75° form offer? The parallelogram 75° geometry provides a favourable cutting angle for both face and peripheral milling, aiding chip evacuation and enabling flexible toolpath strategies. Is the G55 chipbreaker suitable for finishing? The G55 chipbreaker supports controlled chip formation; paired with appropriate cutting parameters it can achieve good surface quality in finishing passes while remaining effective in semi‑roughing. Can this insert be used in interrupted cuts? Yes; the robust grade and 3.2 mm corner radius are designed to withstand shock loads typical of interrupted machining, contributing to reliable edge life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademarks and trade names are the property of their respective owners. Brand names and protected product designations are cited for explanation only; there is no connection between Metav Werkzeuge and the mentioned manufacturers. The offered item is original and factory‑new.
BCMT160540L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the G55 chipbreaker for dependable performance in steel and cast iron milling; the result is stable machining and consistent surface quality. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. BCMT160540L-G55 WKP35G milling insert — Tiger‑tec Gold, for steel and cast iron (Walter Tools) The BCMT160540L-G55 WKP35G is a precision milling insert engineered for efficient roughing and finishing of steel and cast iron components in production environments. Tiger‑tec Gold coating for longer tool life Optimised G55 chip control for stable machining Parallelogram 75° shape for versatile engagement 7° free clearance for reduced rubbing and heat Consistent chip formation and process security for demanding steels The BCMT160540L-G55 WKP35G is designed around a coated carbide substrate and the Tiger‑tec Gold technology to deliver stable chip formation when machining steels. The G55 chipbreaker geometry promotes predictable chip flow, which reduces the risk of built‑up edge and supports continuous operation. For engineers seeking to maintain cycle times while preserving tool life, this insert offers a balance between material removal rate and surface finish. The grade’s construction is especially suitable where intermittent cuts or variable feed conditions occur, as the combination of coating and chip control mitigates abrasive and thermal wear. Durable coating and grade selection that extend tool life The insert’s Tiger‑tec Gold coating provides a hard, wear‑resistant surface that tolerates the heat and mechanical stresses typical of steel and cast iron machining. The coated topology reduces flank wear and supports repeatable performance across batches, translating into fewer tool changes and more predictable production planning. The WKP35G grade is a coated‑carbide formulation optimised for a broad range of workpiece steels and cast irons, offering dependable edge stability and resistance to abrasive wear. The result is improved uptime and greater confidence in achieving specified tolerances without excessive finishing passes. Geometry tailored for productive milling and machine compatibility Built in a parallelogram 75° form, with a free clearance of 7° and a corner radius 4, the insert supports a range of cutting strategies from light finishing to more aggressive roughing. The geometry enables secure seating in compatible toolholders and promotes controlled engagement with the workpiece, reducing vibration and improving surface integrity. Operators benefit from straightforward insert indexing and consistent contact conditions, which help to maintain toolholder balance and machining stability—critical factors in high‑productivity turning and milling cells. Contact Metav Werkzeuge for tailored application support and to secure Walter Tools Tiger‑tec Gold inserts for optimised milling results Technical data Article number: BCMT160540L-G55-WKP35G-WALTER SKU: BCMT160540L-G55-WKP35G-WALTER Designation: BCMT160540L-G55 WKP35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Free clearance: 7° Corner radius: 4 Plate size: 16 Plate thickness: 05 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKP35G Material suitability: P (steel), K (cast iron) Chipbreaker: G55 Plate form: Parallelogramm 75° Substrate: coated carbide FAQ What materials is this insert suitable for? The BCMT160540L-G55 WKP35G from Walter Tools is suitable for machining steel and cast iron (ISO groups P and K), thanks to the WKP35G grade and G55 chipbreaker. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the insert enhances wear resistance and supports stable machining, which reduces tool changes and helps secure consistent surface quality. Which geometry advantages does the parallelogram 75° form provide? A parallelogram 75° shape enables flexible entry angles and reliable seating in compatible toolholders, improving engagement stability and surface finish in milling operations. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names mentioned are the property of their respective owners and are used for explanation only. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, brand‑new product from the manufacturer.
BCMT160540L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the G55 chipbreaker to achieve reliable chip control and extended tool life, while the parallelogram 75° geometry provides stable engagement for productive milling; order directly via Metav Werkzeuge or consult our experts for application-specific advice. BCMT160540L-G55 WSP45G milling insert — for steel, stainless steel and superalloys (Tiger·tec Gold) — Walter Tools A BCMT160540L-G55 WSP45G is a parallelogram milling insert designed for productive roughing and finishing operations in steel, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD coating, enhanced wear resistance Suitable for Steel, Stainless steel and Superalloys Parallelogram 75° geometry for stable milling 7° relief angle and 4 corner radius Higher productivity through longer cutting life The coated carbide grade, implemented with Tiger·tec Gold PVD technology, delivers measurable improvements in wear resistance and edge stability. By reducing flank wear and prolonging the effective cutting period, the insert lowers downtime and frequency of index changes, which boosts machine uptime. This enhancement is particularly valuable in high-volume milling where consistent tool life translates directly into predictable production output and reduced tooling cost per part. Reliable chip control across a wide material range Equipped with the G55 chipbreaker, the insert is optimised for secure chip formation when machining steel, stainless steel and superalloys. The chip control geometry supports stable chip evacuation even under elevated temperatures, helping to avoid built-up edge and reducing the risk of workpiece damage. Such controlled behaviour simplifies process setup and contributes to consistent surface quality in both roughing and finishing passes. Geometry engineered for cutting stability and accuracy The parallelogram 75° shape combined with a 7° relief angle and 4 corner radius enhances radial support and distributes cutting forces over the edge, improving stability during interrupted cuts and slotting. This geometry reduces vibration and promotes a repeatable cutting contour, resulting in improved dimensional accuracy and a better surface finish. The insert form also facilitates secure clamping and precise seat location in standard milling cutters. Process reliability and economical machining The combination of a coated carbide substrate and PVD top layer offers a balance between toughness and hardness, enabling safe machining of demanding alloys and titanium-based materials. Process planners benefit from predictable performance across different material groups (P / M / S), simplifying tool selection and inventory. The result is an economical machining strategy that supports both productivity targets and quality standards without excessive tool consumption. Request a tailored cutting recommendation from Metav Werkzeuge for the Walter Tools BCMT160540L-G55 WSP45G milling insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BCMT160540L-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT160540L-G55 WSP45G Walter Tools Manufacturer: Walter Tools Product type: milling indexable insert Series: Tiger-tec Gold Grade: WSP45G Shape: Parallelogram 75° Size designation: 16 Execution: T Designation without grade: BCMT160540L-G55 ISO designation: BCMT160540L-G55 WSP45G Core figures Size: 16 Corner radius: 4 Relief angle: 7° Thickness: 05 Tolerance class: M Special features Coating: Tiger·tec Gold (PVD) Material: coated carbide Chipbreaker: G55 Applicable material groups: P / M / S Series description: Zähe, vielseitige PVD-Sorte für Fräsanwendungen FAQ What materials can this insert process effectively? The BCMT160540L-G55 WSP45G insert is formulated for machining steel, stainless steel and heat-resistant superalloys (groups P / M / S) thanks to its coated carbide grade and Tiger·tec Gold PVD layer. How does the G55 chipbreaker affect cutting performance? The G55 chipbreaker on the BCMT160540L-G55 WSP45G improves chip formation and evacuation, reducing built-up edge and supporting consistent surface quality across roughing and finishing operations. Is this insert suitable for interrupted cuts and slotting? Yes. The parallelogram 75° geometry combined with a 7° relief angle and a 4 corner radius gives enhanced radial support, which increases stability during interrupted cuts and slotting. Can the insert be used for both roughing and finishing passes? The coated carbide grade and the Tiger·tec Gold coating provide a balance of toughness and hardness that makes the insert suitable for a range of operations from productive roughing to controlled finishing. What series and grade identifies this product? The insert belongs to the Tiger-tec Gold series and carries the grade WSP45G; the full ISO code is BCMT160540L-G55 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools and Walter AG are registered trademarks. Protected brand names and product designations remain the property of their respective owners and are used here for descriptive purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
BCMT160540R-G55 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WKP35G grade for high process reliability and extended edge life; the G55 chipformer and 7° clearance support stable chip control and consistent part quality. Order the BCMT160540R-G55 WKP35G directly via Metav Werkzeuge or ask the consultants if needed. BCMT160540R-G55 BCMT160540R-G55 WKP35G — WKP35G milling insert for steel and cast iron — Walter Tools A BCMT160540R-G55 WKP35G indexable milling insert designed for secure production milling of steel (P) and cast iron (K), featuring Tiger·tec Gold coating and an optimised chipbreaker geometry. Tiger·tec Gold coated carbide Optimised chip control G55 7° clearance angle for stable cut Parallelogram 75° form, precise seating Increased productivity through wear-resistant grade and chip control The combination of the Tiger·tec Gold coating with the WKP35G coated carbide grade delivers measurable benefits in milling operations. The coating technology reduces abrasive wear and supports a stable cutting edge, which translates into longer tool life and fewer index changes on the toolholder. The integrated G55 chipbreaker is engineered to control swarf formation when machining both steel and cast iron, reducing the risk of built-up edge and improving cycle times. For process-driven production environments, this results in more consistent component tolerances and reduced downtime for insert changes. Geometry that secures clamping and improves surface result The insert’s parallelogram 75° form and the specified 7° clearance angle create a secure seating in compatible toolholders and promote stable cutting forces during intermittent milling. The tolerance class M and execution type T ensure repeatable positioning in indexable tool systems, supporting dimensional consistency across batches. These geometric attributes help to reduce chatter and enhance surface finish on the workpiece by keeping the cutting edge in the optimal engagement angle, which is particularly beneficial when working with challenging geometries or interrupted cuts. Application guidance and operational advantages This grade and geometry combination is optimised for the ISO material groups P (steel) and K (cast iron), addressing both the thermal and abrasive wear characteristics typical of these materials. The coated carbide chemistry and chipformer allow stable material removal rates and predictable wear progression, supporting efficient machining strategies. When integrating this insert into a production line, choose cutting parameters aligned with the toolholder rigidity and machine power; for fine finishing and consistent microgeometry, favour lower depths of cut with higher feed per tooth within the rated envelope. For catalogue- or geometry-specific recommendations, consult the technical consultants to align parameters with the specific application. For demanding milling tasks, opt for the Walter Tools BCMT160540R-G55 WKP35G insert—contact Metav Werkzeuge for precise machining recommendations and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: BCMT160540R-G55-WKP35G-WALTER Article designation: BCMT160540R-G55 WKP35G Brand: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Core specifications Clearance angle: 7° Corner radius (code): 4 Insert size: 16 Thickness code: 05 Form: Parallelogram 75° Tolerance class: M Design & special features Chip breaker: G55 Coating: Tiger·tec Gold Material compatibility: P / K Execution: T Label: Fräswendeschneidplatte BCMT160540R-G55 WKP35G Walter Tools FAQ Is this insert suitable for both steel and cast iron? Yes. The BCMT160540R-G55 WKP35G is specified for ISO groups P (steel) and K (cast iron); its WKP35G coated carbide grade and G55 chipformer are adapted to the thermal and abrasive conditions of these materials. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on this insert increases wear resistance and promotes stable edge life, which helps to maintain consistent part quality and reduce the frequency of insert changes during production. How does the parallelogram 75° form affect machining? The parallelogram 75° form ensures secure seating in compatible holders and directs cutting forces to support a stable engagement, improving surface finish and reducing the tendency for vibration in interrupted cuts. Can the chipbreaker G55 handle long, stringy chips? The G55 chipbreaker is optimised for reliable chip control across the specified materials; it promotes short, controllable chips when machining cast iron and helps to fracture or curl chips effectively when cutting steel. What tolerance and execution details are relevant for tool setup? The insert is supplied in tolerance class M and execution T, which supports repeatable positioning in standard indexable tool systems and simplifies tool setting for production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the respective manufacturer.
BCMT160540R-G55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, robust edge life and reliable chip control for consistent milling results; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. BCMT160540R-G55 WKP35S milling indexable insert – for steel and cast iron | Walter Tools The BCMT160540R-G55 WKP35S is a coated carbide milling insert designed for productive finishing and semi-finishing of steel and cast iron components. Coated Tiger-tec Silver grade WKP35S Parallelogram 75° shape with 7° relief 4 mm corner radius for robust edge Suited for steel (P) and cast iron (K) machining High productivity through wear-resistant coating and consistent performance The combination of Tiger-tec Silver coating and the WKP35S grade delivers stable cutting-edge life under cyclic loading and varying workpiece conditions. The advanced coating reduces flank wear and helps maintain dimensional accuracy over longer tool life, which translates into fewer indexings and lower tool costs per part. For operations where cycle time and repeatability matter, the coated carbide substrate provides the necessary hardness and thermal resistance to withstand the heat generated when machining steel and cast iron. Geometry engineered for stable cutting and controlled chip formation The parallelogram 75° configuration together with the G55 chipbreaker promotes predictable chip flow and reduces vibration in interrupted cuts. A 7° relief angle reduces rubbing on the flank and improves surface finish, while the 4 mm corner radius supports edge robustness and contributes to consistent contouring and profile retention. These geometric choices reduce the risk of premature edge failure and help maintain surface quality without requiring excessive cutting parameters. Practical benefits for process planning and tool management The insert’s designation simplifies tool ordering and inventory control: BCMT160540R-G55 WKP35S identifies the ISO geometry, chipbreaker and the Walter Tools grade at a glance. Its suitability for the ISO groups P (steel) and K (cast iron) means fewer grade variants are needed across mixed-production environments, enhancing tool rationalisation and reducing setup complexity. When combined with suitable cutter bodies, the insert supports predictable machining windows and easier optimisation of cutting speeds and feeds. Contact Metav Werkzeuge for application advice on Walter Tools Tiger-tec Silver inserts and to discuss suitable cutter-body pairings at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: BCMT160540R-G55-WKP35S-WALTER Designation: BCMT160540R-G55 WKP35S Product type: Milling indexable insert Manufacturer: Walter Tools Grade / series: WKP35S / Tiger-tec Silver Material group: P / K Core specifications Insert size: 16 mm Thickness code: 05 Corner radius: 4 mm Relief / free angle: 7° Shape: Parallelogram 75° Chipbreaker: G55 Tolerance class: M Execution: T Materials / special features Coated cemented carbide Optimised for steel and cast iron (ISO P / K) Stable chip control for finishing and semi-finishing Robust cutting edge for interrupted cuts Series: Tiger-tec Silver Grade: WKP35S FAQ What applications is this insert best suited for? The BCMT160540R-G55 WKP35S milling insert is designed primarily for finishing and semi-finishing of steel and cast iron components, offering reliable surface quality and edge life. How does the Tiger-tec Silver coating improve performance? The Tiger-tec Silver coating on the WKP35S grade reduces adhesive and abrasive wear, extending tool life and stabilising machining performance in the BCMT160540R-G55 insert. Which chipbreaker should be selected for heavy interrupted cuts? The G55 chipbreaker on this insert is optimised for stable chip formation in finishing and semi-finishing; for severe interruptions, consider combining with suitable cutter bodies and reduced depths of cut. Can the insert be used for both roughing and finishing operations? While the insert performs best in finishing and semi-finishing due to its geometry and corner radius, it can be applied to light roughing when cutting conditions are adjusted accordingly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160540R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Benefit from the combination of WSM45X coated carbide and the G55 chipbreaker for reliable chip control and extended tool life in demanding materials. The insert’s 7° clearance and parallelogram 75° geometry ensure process stability and flexible milling strategies. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. BCMT160540R-G55 WSM45X milling indexable insert — G55 chipbreaker, 7° clearance, Walter Tools BCMT160540R-G55 WSM45X is a milling indexable insert engineered for reliable machining of stainless steels and heat-resistant superalloys in demanding production environments WSM45X grade for stainless steel and superalloys G55 chipbreaker for secure chip control 7° clearance angle for lower friction Parallelogram 75° shape for versatile milling Consistent cutting performance in challenging materials The WSM45X coated carbide grade is formulated for the machining of stainless steels (ISO group M) and superalloys/titanium (ISO group S), where toughness and heat resistance are critical. With a G55 chipbreaker, the insert promotes predictable chip control, reducing the risk of built-up edge and improving surface integrity during medium to heavy cuts. The result is a more stable process, fewer reworks and increased component quality in series production. Geometry engineered for flexible milling strategies The insert’s parallelogram 75° form and specified 7° clearance angle reduce friction and allow adaptable engagement angles for peripheral and face milling. A corner radius of 4 supports strength at the cutting edge while maintaining acceptable surface finish, especially when alternating between roughing and semi-finishing passes. The nominal size of 16 provides robust support in many toolholder systems without sacrificing accessibility to tight features. Productivity gains and lower process costs A combination of the coated carbide grade and proven chipformer design contributes to longer edge life and consistent wear behaviour, which translates into fewer indexings and reduced downtime. Predictable tool life supports process planning and cost calculations, making the insert suitable for OEM and subcontractor environments that prioritise throughput and repeatability. The open Walter grade series provides an industry-proven compromise between durability and broad material applicability. Practical application notes and support options This indexable insert is intended for use in steelmaking and aerospace component production where stainless steels and heat-resistant alloys are common. For best results, pair the insert with stable clamping, appropriate coolant strategies and a toolholder matched to the cutting forces. If further machining parameters or compatibility checks are required, Metav Werkzeuge’s technical team can provide cutting-data guidance and application-specific recommendations to optimise cycle time and surface results. Choose the Walter Tools BCMT160540R-G55 WSM45X for robust chip control in difficult-to-machine materials — contact Metav Werkzeuge for tailored machining advice and reliable delivery. Technical Data SKU: BCMT160540R-G55-WSM45X-WALTER Label: Fräswendeschneidplatte BCMT160540R-G55 WSM45X Walter Tools Product type: Fräswendeschneidplatte Brand: Walter Tools Data Clearance angle: 7° Corner radius: 4 Size: 16 Thickness: 05 Shape: Parallelogram 75° Tolerance class: M Special features Grade: WSM45X Chipbreaker: G55 Material applicability: S / M Series: Walter Schneidstoffsorte - Serie offen Coated carbide (beschichtetes Hartmetall) Suitable for stainless steels and superalloys (ISO groups M and S) FAQ What materials is this insert suited for? The BCMT160540R-G55 WSM45X is designed for stainless steels and heat-resistant superalloys (ISO groups M and S) and performs well where toughness and thermal stability are required. How does the G55 chipbreaker affect machining? The G55 chipbreaker on this Walter Tools milling insert produces controlled chip shapes, improving evacuation and reducing the likelihood of built‑up edge during interrupted or continuous cuts. Is the insert suitable for roughing and finishing? Yes, the geometry and corner radius 4 provide a balance between edge strength for roughing and surface quality for semi-finishing; machining strategy determines the final finish. What is the significance of the parallelogram 75° shape? The parallelogram 75° form offers flexible approach angles for different milling operations, enabling both profile and shoulder milling with improved insert support. Where can additional cutting data be obtained? Application-specific cutting parameters and holder compatibility guidance are available from Metav Werkzeuge; reference the SKU BCMT160540R-G55-WSM45X-WALTER when enquiring. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the manufacturers. The offered article is original, factory‑new merchandise from the named manufacturer.
BCMT160540R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the versatile WSP45G grade for long tool life and consistent chip control in mixed‑material milling; order directly via Metav Werkzeuge or request advice from our consultants. Fräswendeschneidplatte BCMT160540R-G55 WSP45G – Parallelogram 75°, Tiger·tec Gold (Walter Tools) The BCMT160540R-G55 WSP45G is a Walter Tools milling insert designed for versatile finishing and semi‑roughing across steel, rostfreier Stahl and heat‑resistant alloys in general milling applications. Tiger·tec Gold PVD coating for high wear resistance Suitable for steel, rostfreier Stahl and superalloys Parallelogram 75° shape for secure clamping 7° clearance with 4 mm corner radius Durable cutting grade for consistent production The WSP45G grade, part of the Tiger·tec Gold family, combines a tough substrate with a multi‑layer PVD coating to deliver stable cutting edges and extended tool life. This cutting grade is engineered for the typical heat generation and chip formation encountered when machining steels and rostfreier Stahl, reducing flank wear and the need for frequent index changes. By favouring stability over aggressive edge geometry, the insert supports predictable performance across mixed production batches, which helps to reduce downtime and improves overall process efficiency. Geometry tuned for repeatable accuracy The parallelogram 75° format with a small positive 7° clearance and a 4 mm corner radius provides secure seating in clamping systems and a consistent cutting line, which benefits surface finish and dimensional repeatability. The plate thickness code 05 and the tolerance class M ensure repeatable insert placement and stable tool runout in modern toolholders. These geometric choices favour modest cutting forces and help maintain a stable chip flow, translating into fewer reworks and more predictable cycle times when finishing components. Controlled chip formation and economical machining The integrated chipbreaker G55 is optimised for reliable chip control across a wide range of feed rates and depths of cut, reducing the risk of built‑up edge and improving evacuation in confined tool paths. The insert’s adaptability to steel, rostfreier Stahl and high‑temperature alloys makes it a practical choice for workshops that handle varied materials without frequent tool changes. Together with the grade’s wear resistance, this contributes to a favourable cost‑per‑part ratio and supports continuous production demands with lower tooling intervention. Contact Metav Werkzeuge to discuss the Tiger·tec Gold grade and secure BCMT160540R‑G55 WSP45G inserts for the next production run Technical data Article number: BCMT160540R-G55-WSP45G-WALTER Product designation: BCMT160540R-G55 WSP45G Manufacturer: Walter Tools Facts Insert size: 16 Thickness code: 05 Clearance angle: 7° Corner radius: 4 mm Tolerance class: M Chipbreaker: G55 Special features Series: Tiger·tec Gold Grade: WSP45G (PVD coated carbide) Plate form: Parallelogram 75° Material suitability: P / M / S (Steel / rostfreier Stahl / Superalloys) Execution: T FAQ Is this insert suitable for machining stainless steels? Yes. The WSP45G grade in the Tiger·tec Gold series is formulated for machining rostfreier Stahl with improved chip control and edge stability. Which materials are covered by the P / M / S designation? P denotes steels, M denotes rostfreier Stahl and S covers heat‑resistant superalloys and titanium; the insert is intended for use across these groups. What is the benefit of the parallelogram 75° form? The 75° parallelogram shape provides secure clamping and a consistent cutting line, improving repeatability and surface finish when using the BCMT160540R‑G55 WSP45G insert. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes stable chip formation and evacuation, which reduces the risk of built‑up edge and supports continuous machining across varied feed rates. Trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
BCMT160540R-G55W WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, secure chip control and consistent edge stability to keep production flowing on demanding materials; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. BCMT160540R-G55W WSM45X milling indexable insert — for stainless steel and superalloys, Walter Tools BCMT160540R-G55W WSM45X is a coated carbide milling insert designed for heavy-duty machining of stainless steels and heat-resistant alloys; its geometry supports secure clamping and sustained cutting performance Coated carbide grade WSM45X G55W chipbreaker for stable chips Suited for stainless steel and superalloys Parallelogram 75° form for secure clamping High thermal stability for challenging materials The WSM45X grade is a coated carbide developed for work on tough-to-machine alloys; its composition prioritises thermal resistance and edge stability so that wear is reduced under elevated cutting temperatures. In practice, this means longer intervals between index changes and fewer unplanned interruptions, which translates into a predictable cycle time for operations on stainless steel and superalloys. The design delivers consistent flank wear behaviour rather than abrupt failure, supporting reliable process planning. Controlled chip formation to protect the cutting edge Equipped with the G55W chipbreaker, the insert promotes efficient chip control and reduces tendencies for built-up edge when operating at typical feeds and speeds for difficult materials. Improved chip flow lowers the risk of unexpected tool damage and enhances surface finish quality on the machined component. As a result, workshops benefit from fewer rework cycles and a smoother downstream process, especially when machining components with demanding surface integrity requirements. Geometry that secures repeatability and clamping stability The parallelogram 75° form combined with a 7° clearance and a defined corner radius 4 gives a predictable engagement and positive seating behaviour in standard milling toolholders. This geometry supports a stable cutting force vector and helps maintain dimensional repeatability across batches. The insert’s nominal size (16) and plate thickness (05) ensure compatibility with holders designed for this ISO designation, enabling easy integration into existing tool setups without compromise to clamping torque or tool runout. Application guidance and practical selection advice For best results with this indexable insert, select cutting speeds and feeds aligned with the workpiece alloy class and coolant strategy; trials under production-like conditions are recommended to confirm parameter windows. If unsure whether this grade suits a specific application, Metav Werkzeuge can provide tailored recommendations and clarifications on compatibility, including suggested machining data for stainless steel and high-temperature alloys. For further technical data or advice: info@metav-werkzeuge.com or call +49 2822 7131930. Discuss process requirements with Metav Werkzeuge and arrange supply of the BCMT160540R-G55W WSM45X insert through our specialists for application-optimised performance Technical data Article number: BCMT160540R-G55W-WSM45X-WALTER Designation: BCMT160540R-G55W ISO designation: BCMT160540R-G55W WSM45X Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 4 Plate form: Parallelogram 75° Plate size: 16 Plate thickness: 05 Tolerance class: M Special features Grade series: Walter Schneidstoffsorte - Serie offen Grade/sort: WSM45X (coated carbide) Chipbreaker: G55W Material suitability: S / M (superalloys; stainless steel) Execution: T FAQ What materials is this insert suitable for? The BCMT160540R-G55W WSM45X insert is designed primarily for stainless steel and heat-resistant superalloys, as indicated by its S / M designation and the WSM45X coated carbide grade. How does the G55W chipbreaker affect machining? The G55W chipbreaker improves chip control and reduces built-up edge, leading to more stable cutting and improved surface quality when machining demanding materials. Which geometry features support clamping stability? The parallelogram 75° form and 7° clearance produce a predictable seating and cutting force direction, supporting consistent clamping and repeatable results in milling operations. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer Walter Tools.
BCMT160540R-G55W WSP45G WSP45G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating and the WSP45G grade to secure stable chip formation and extended tool life, while the parallelogram 75° geometry supports precise milling results. Order the BCMT160540R-G55W WSP45G milling insert directly via Metav Werkzeuge or consult our technical team for cutting data and application advice. BCMT160540R-G55W WSP45G milling insert — Tiger·tec Gold, for steel / rostfreier Stahl / superalloys, Walter Tools The BCMT160540R-G55G WSP45G is a coated carbide milling insert designed for versatile milling applications across steels, rostfreier Stahl and heat-resistant alloys, offering a balance of edge stability and chip control for robust production environments. Tiger·tec Gold PVD coating For steel, rostfreier Stahl and superalloys Parallelogram shape 75° geometry 7° clearance with 4 mm corner radius Improved process reliability through advanced coating technology The combination of Tiger·tec Gold and a PVD coating creates a highly wear-resistant surface that reduces flank wear and increases tool life in continuous machining. Coated carbide substrates are engineered to withstand thermal and mechanical loads typical of milling operations; the coating reduces adhesion and friction at the cutting edge, which in turn lowers cutting forces and extends maintenance intervals. This technical approach supports more predictable tool performance and helps to maintain consistent production throughput. Broad material capability for fewer tool changes Designed for the ISO groups P, M and S, the insert covers a wide material spectrum: steel (P), rostfreier Stahl (M) and high-temperature superalloys and titanium (S). Each group presents different challenges—steels demand good heat management, rostfreier Stahl tends to form built-up edge, and superalloys require thermal stability—yet the WSP45G grade balances toughness and hardness to manage these behaviours. The result is a versatile cutting solution that reduces the need for multiple grades in mixed-production runs. Geometry that enhances surface quality and chip control The parallelogram 75° configuration combined with a 7° clearance and a 4 mm corner radius provides a secure cutting edge and predictable engagement with the workpiece. This geometry moderates cutting forces and improves axial load distribution, which contributes to a consistent surface finish and reduces vibration. Furthermore, the G55W chipbreaker promotes stable chip formation, simplifying chip evacuation and lowering the risk of re-cutting, which is especially beneficial in uninterrupted, high-volume milling. Application-focused economy and productivity benefits By offering stable chip formation and a broad application range, this insert helps to increase machine utilisation and lower overall operating costs through fewer tool changes and reduced scrap rates. The robust cuting behaviour of the grade supports higher metal removal rates where process stability is critical, making the insert suitable for sectors such as general manufacturing, automotive components and aerospace structural machining. For specific cutting parameters or optimisation in a particular milling cell, technical guidance is available to adapt feeds and speeds precisely to the machining scenario. Contact Metav Werkzeuge today to discuss how the Tiger·tec Gold BCMT160540R-G55W WSP45G milling insert can enhance machining stability and to request tailored cutting data from our consultants at Metav Werkzeuge Technical data Article number: BCMT160540R-G55W-WSP45G-WALTER Name: BCMT160540R-G55W WSP45G Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Free angle: 7° Corner radius: 4 mm Insert size: 16 Thickness: 05 Tolerance class: M Special features Coating: Tiger·tec Gold (PVD) Grade: WSP45G Chipbreaker: G55W Shape: Parallelogram 75° Execution: T Suitable for: Steel (P), rostfreier Stahl (M), Superalloys/Titan (S) Substrate: Coated carbide Material designation: P / M / S FAQ What materials can this milling insert machine effectively? This milling insert from Walter Tools is suitable for steel (P), rostfreier Stahl (M) and heat-resistant superalloys/titanium (S), as indicated by the WSP45G grade and Tiger·tec Gold coating. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold PVD coating on the BCMT160540R-G55W WSP45G reduces wear and adhesion at the cutting edge, improving tool life and ensuring more consistent results across longer production runs. Is the geometry suitable for interrupted cuts or continuous finishing? The parallelogram 75° geometry with a 7° clearance and 4 mm corner radius provides a stable cutting edge that is appropriate for both interrupted and continuous milling tasks, supporting consistent surface quality. Where can one obtain cutting data and application advice for this insert? Cutting data and tailored application advice for the BCMT160540R-G55W WSP45G milling insert are available from Metav Werkzeuge; the company can provide parameters optimised for the specific material and machining setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160550L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Gold wear resistance together with the WKP35G grade for reliable performance on steel and cast iron; the G55 chipbreaker and 75° parallelogram form ensure consistent chip control and stable cutting. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. BCMT160550L-G55 WKP35G milling indexable insert — Tiger‑tec Gold for steel and cast iron by Walter Tools The BCMT160550L-G55 WKP35G is a precision milling insert designed for high‑productivity machining of steel and cast iron, combining a Tiger‑tec Gold coating with a G55 chipbreaker for controlled chip formation. Tiger‑tec Gold coated for long tool life WKP35G grade for steel and cast iron Parallelogram 75° shape, 7° clearance G55 chipbreaker, 5 mm corner radius Maximise cutting performance with advanced coating technology The combination of Tiger‑tec Gold coating and the WKP35G substrate delivers notably improved wear resistance and thermal stability during continuous milling, which reduces tool changes and increases uptime. The coated carbide chemistry is engineered to withstand the typical heat and abrasion encountered when machining steel, while also coping with the intermittent, abrasive cutting of cast iron, providing consistent edge life and predictable performance under elevated cutting speeds. Geometry that enhances stability and chip control A 75° parallelogram form paired with a G55 chipbreaker yields reliable chip segmentation and evacuation, reducing the risk of recutting and edge damage. The modest 7° clearance helps maintain favourable cutting angles and contact conditions, while the 5 mm corner radius provides a balanced compromise between strength and accessibility to detail features. These geometric attributes result in improved process stability and repeatable surface finish with fewer interruptions. Process advantages and application relevance for modern production Designed for professional milling operations, this insert supports efficient, cost‑effective production by enabling higher material removal rates and improved tool life. The grade and chipbreaker are optimised specifically for machining tasks classified under ISO group P (unalloyed and alloyed steels) and K (cast iron), ensuring the insert matches common workshop requirements and reduces the need for multiple tool types in mixed‑material batches. The reliable combination of grade and geometry supports predictable cycle times and easier process planning. For reliable, high‑productivity milling with Walter Tools' Tiger‑tec Gold series, consult Metav Werkzeuge for tailored recommendations and technical assistance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BCMT160550L-G55-WKP35G-WALTER Description: Fräswendeschneidplatte BCMT160550L-G55 WKP35G Walter Tools Manufacturer: Walter Tools SKU: BCMT160550L-G55-WKP35G-WALTER Facts Clearance angle: 7° Corner radius: 5 mm Plate size: 16 Thickness: 05 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKP35G Chipbreaker: G55 Form: Parallelogram 75° Applicable materials: Steel (P), Cast iron (K) Execution: T ISO designation: BCMT160550L-G55 WKP35G FAQ What materials is this insert suitable for? The BCMT160550L‑G55 WKP35G insert is specified for machining steel and cast iron; the WKP35G grade and G55 chipbreaker are tuned for these ISO material groups. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold coating on the insert enhances wear resistance and thermal stability, which in turn extends tool life and supports higher cutting speeds for more productive milling operations. What chip control can be expected with the G55 chipbreaker? The G55 chipbreaker promotes consistent chip segmentation and evacuation, reducing the likelihood of built‑up edge and improving surface finish during continuous milling. Is the insert geometry suitable for finishing and semi‑finishing? The 75° parallelogram form and 5 mm corner radius provide a balance between strength and accessibility, making the insert appropriate for many semi‑finishing and some finishing operations depending on process parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation implied. The offered article is an original, brand‑new product from the manufacturer.
BCMT160550L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust 75° parallelogram geometry and a low 7° clearance angle for consistent chip control and longer tool life; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. BCMT160550L-G55 WSP45G milling insert (BCMT160550L-G55) — Tiger·tec Gold, 7° clearance, 75° parallelogram by Walter Tools A BCMT160550L-G55 WSP45G milling insert optimised for versatile milling of steel, stainless steel and heat‑resistant alloys in finishing and medium‑duty operations. Tiger·tec Gold coating for stable cutting Suitable for steel, rostfreier Stahl and superalloys 75° parallelogram shape with 7° clearance Robust cutting edge with R5 corner radius Greater productivity through advanced coating and chip control The Tiger·tec Gold coating technology provides a measurable improvement in wear resistance and thermal stability, which translates into longer tool life and fewer tool changes. This insert's coated cemented carbide grade, WSP45G, is engineered for stable chip formation, reducing built‑up edge and interruptions during continuous milling. For production environments that prioritise throughput and repeatability, the coating performance supports higher metal removal rates while maintaining surface quality. One insert for multiple materials — fewer tool changes Designed for the ISO groups P / M / S, the insert covers unalloyed and alloyed steel, rostfreier Stahl and heat‑resistant superalloys or titanium, enabling broad application coverage with a single geometry. The 75° parallelogram shape improves approach flexibility on shoulder and face milling, while the 7° clearance helps manage cutting forces and edge engagement. The result is a reduction in tool inventory and quicker process set‑ups, which benefits job shops and production lines seeking economical tool management. Geometry and edge design for consistent surface finish The insert's geometry, including the specified corner radius (R5) and the medium tolerance class M, supports a robust cutting line that resists chipping during interrupted cuts. The plate dimensions and thickness provide rigidity in common cutter bodies, yielding a predictable cutting behaviour and reliable surface finish in finishing passes. Clear specification of geometry and tolerances simplifies toolholder selection and ensures repeatable results across batches and operators. For process‑secure milling with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for tailored advice or to place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: BCMT160550L-G55-WSP45G-WALTER Product type: milling insert / indexable insert Series: Tiger·tec Gold Grade: WSP45G Designation: BCMT160550L-G55 Facts Shape: Parallelogram 75° Clearance angle: 7° Corner radius: 5 Size: 16 Thickness: 05 Tolerance class: M Design & Features Coating: Tiger·tec Gold (PVD, coated cemented carbide) Material applicability: P / M / S Execution: T Intended use: finishing and medium‑duty milling Manufacturer: Walter Tools FAQ Which materials can be machined with this insert? The BCMT160550L-G55 WSP45G insert is suitable for machining steel (P), rostfreier Stahl (M) and heat‑resistant superalloys/titanium (S) according to the ISO groupings for the WSP45G grade. What does the Tiger·tec Gold coating offer? Tiger·tec Gold enhances thermal stability and wear resistance on the BCMT160550L-G55 WSP45G, improving edge life and chip control during continuous milling operations. How does the 75° parallelogram shape affect cutting? A 75° parallelogram form provides improved entry angles for shoulder and face milling, allowing the BCMT160550L-G55 WSP45G to achieve stable engagement and consistent surface quality. What does the corner radius mean for surface finish? The specified corner radius (R5) on this insert supports a robust cutting edge that reduces the risk of chipping and helps achieve a reliable finish in light to moderate finishing passes. Manufacturer / Responsible: Walter Tools (Walter Deutschland GmbH); Derendinger Straße 53; 72072 Tübingen; Germany; Note: Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160550R-G55 WKP35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WKP35G grade provides higher productivity and consistent edge life; the result is stable milling in Stahl and cast iron with reliable chip control. Order the insert directly via Metav Werkzeuge or consult the team for process-matched selection. BCMT160550R-G55 WKP35G milling indexable insert – Parallelogram 75°, 7° clearance, for Stahl and cast iron (Walter Tools) The BCMT160550R-G55 WKP35G is a coated carbide milling insert from the Tiger·tec Gold series, designed for high-productivity face and shoulder milling in applications involving Stahl and cast iron. Tiger·tec Gold coating for longer tool life Optimised G55 chipformer for reliable chip control Parallelogram 75° geometry for versatile milling Suited to Stahl and cast iron machining Maximised productivity thanks to modern coating technology The combination of the Tiger·tec Gold coating with the WKP35G grade ensures a coated carbide structure that resists abrasive wear and maintains a stable cutting edge under continuous operation. This results in extended tool life and fewer insert changes, which contributes directly to shorter machine downtime and lower process costs. In practice, the enhanced wear resistance also supports sustained cutting conditions in high-volume production, allowing for consistent cycle times and predictable component quality. Reliable chip control and geometry that support surface quality A well-designed G55 chipformer paired with the parallelogram 75° shape improves chip evacuation and reduces the risk of built-up edge during interrupted cuts. The specified 7° clearance and corner radius 5 help to balance strength and finish: the clearance reduces rubbing while the corner radius improves surface integrity on the workpiece. Together these geometric choices lead to stable cutting forces and better surface finish in shoulder and face milling, particularly when milling varying cross-sections or working at higher feed rates. Broad material capability and process security for daily workshop needs The insert is specified for ISO groups P and K, which means suitability for Stahl (ISO P) and cast iron (ISO K). This versatility makes the grade an efficient choice for job shops and production cells where mixed-material batches occur. The result is fewer tool changes between operations and a more consistent production flow. For teams seeking documented evidence of suitability, the insert’s series provenance and chipformer design support predictable chip formation and reduced scrap rates in standard milling tasks. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger·tec Gold inserts into the process—call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss geometry, grade selection and optimum cutting data Technical data Article number: BCMT160550R-G55-WKP35G-WALTER Name: BCMT160550R-G55 WKP35G Product type: milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Data Plate size: 16 Plate thickness: 05 Clearance angle: 7° Corner radius: 5 Plate form: Parallelogram 75° Chipformer: G55 Grade: WKP35G Tolerance class: M Material groups: P / K Special features Coating: Tiger·tec Gold Material: coated carbide Main applications: Stahl and cast iron machining Execution: T Range: Tiger-tec Gold series FAQ What materials can this insert machine effectively? The insert is designed for Stahl (ISO P) and cast iron (ISO K), matching the intended use of the BCMT160550R-G55 WKP35G in mixed-material production. Which chipformer is fitted and why is it important? The G55 chipformer is optimised for reliable chip control; it reduces clogging and supports stable cutting forces, helping to preserve edge life and surface finish. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating increases wear resistance and thermal stability, extending tool life under continuous or demanding cutting conditions. Is the geometry suitable for both roughing and finishing? Yes; the parallelogram 75° geometry and corner radius 5 offer a balance between strength for roughing and edge quality for finishing operations. Can this insert be used in automated production lines? The insert’s grade and coating are developed for high productivity and repeatable performance, making it suitable for automated and high-volume machining environments. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names are used solely for explanation and identification. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
BCMT160550R-G55 WKP35S Wendeplatten - Walter Tools
The combination of Tiger‑tec Silver coating, the WKP35S grade and the G55 chipbreaker ensures consistent chip control and long tool life in steel and cast iron machining; take advantage of reliable engagement from the parallelogram 75° geometry for secure milling cycles. Order directly via Metav Werkzeuge or contact our consultants for tailored recommendations. BCMT160550R-G55 WKP35S milling insert BCMT160550R-G55 – Tiger‑tec Silver, for steel and cast iron (Walter Tools) A BCMT160550R-G55 WKP35S indexable milling insert designed for productive finishing and reliable chip control in steel and cast iron applications Tiger‑tec Silver coated carbide WKP35S Optimised chipbreaker G55 for stable chips Parallelogram 75° shape for secure engagement 7° relief angle with 5 mm corner radius Consistent chip control for uninterrupted production The Tiger‑tec Silver coating combined with the WKP35S carbide grade delivers predictable wear behaviour and controlled heat dissipation, which translates into steadier machining and fewer interruptions. The integrated G55 chipbreaker is engineered to form shorter, manageable chips when working with steel and cast iron, reducing the risk of chip-related downtime and improving machine availability. For production environments where stability and repeatable cutting performance matter, this insert supports continuous operation and consistent surface quality. Geometry that enhances tool engagement and process security A parallelogram 75° form and a 7° relief angle provide secure engagement in the cutter body and reduce the tendency to dig in during entry. The 5 mm corner radius balances robustness and edge strength, supporting light finishing passes while resisting chipping under intermittent cuts. The tolerance class M ensures uniform dimensions for predictable assembly and repeatable runout behaviour, which aids process planning and reduces setup time in series production. Durable grade and coating for extended tool life The coated carbide composition of the WKP35S grade is optimised for the thermal and abrasive conditions encountered when machining unalloyed and alloyed steel as well as cast iron. The Tiger‑tec Silver technology provides a protective barrier against abrasive wear and thermal degradation, extending the service interval of the insert and lowering the total cost per part. Where part counts and machine hours are critical metrics, the improved edge life contributes directly to lower tooling consumption and more efficient throughput. Contact Metav Werkzeuge today for application-specific advice on integrating this Walter Tools insert into current tooling systems and for ordering options tailored to production requirements Technical data SKU: BCMT160550R-G55-WKP35S-WALTER Product type: milling insert Designation: BCMT160550R-G55 WKP35S Manufacturer: Walter Tools Facts Size: 16 Thickness: 5 mm Relief angle: 7° Corner radius: 5 mm Shape: Parallelogram 75° Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKP35S (coated carbide) Chipbreaker: G55 Material suitability: steel (P), cast iron (K) Execution: T FAQ What materials is this insert suitable for? The BCMT160550R-G55 WKP35S insert is designed primarily for steel and cast iron machining, matching the Tiger‑tec Silver grade characteristics. How does the G55 chipbreaker affect performance? The G55 chipbreaker promotes short, controlled chips when cutting steel and cast iron, improving chip evacuation and reducing the likelihood of chip entanglement. Is this insert compatible with standard cutter bodies? The BCMT160550R-G55 geometry and tolerance class M make it suitable for use in milling cutters that accept BCMT inserts; verify seat type and clamping geometry before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are used solely for identification and explanation. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
BCMT160550R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust G55 chipbreaker and the proven parallelogram form to secure consistent milling results across steel, stainless steel and high‑temperature alloys; order the insert directly via Metav Werkzeuge or consult our specialists for tailored recommendations BCMT160550R‑G55 BCMT160550R‑G55 WSP45G Walter Tools milling insert — Tiger·tec Gold, versatile P/M/S application A BCMT160550R‑G55 WSP45G milling insert engineered for versatile roughing and finishing in steel, stainless steel and heat‑resistant alloys, presented in a parallelogram 75° form for stable engagement Tiger·tec Gold PVD coating for tool life enhancement G55 chipbreaker for controlled chip formation Parallelogram 75° form for stable milling forces Suitable for steel, stainless steel and superalloys High‑performance coating for extended productivity The Tiger·tec Gold PVD technology combines a tailored coated carbide grade with a surface finish that reduces wear and improves thermal resistance, delivering longer tool life under cyclical loads. This coating is especially effective when machining materials that produce high temperatures at the cutting edge; the result is consistent cutting performance and fewer interruptions for insert changes. For production environments where tool‑change times affect throughput, the improved wear resistance directly contributes to higher uptime and lower process cost per component. Predictable chip control and process stability Equipped with the G55 chipbreaker, the insert promotes secure chip formation across a wide range of feeds, which reduces the risk of built‑up edge and unstable chips that can damage workpieces or tooling. The parallelogram 75° geometry provides a stable cutting angle that balances radial and axial forces, improving vibration behaviour during interrupted or heavy cuts. These design choices combine into a reliable solution for mixed production runs requiring both roughing power and acceptable surface finish with fewer process adjustments. Broad material coverage for flexible tool planning This grade is optimised for machining categories P, M and S, meaning it covers unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. Such breadth allows shop planners to reduce the number of tool types in stock while maintaining machining quality across diverse workpieces. The insert’s tolerance class M and defined chipbreaker geometry support repeatable results, aiding in predictable cycle times and consistent surface integrity in series production. Contact Metav Werkzeuge for personalised tooling advice and expedited supply of the Walter Tools BCMT160550R‑G55 WSP45G insert Technical Data Article number: BCMT160550R‑G55‑WSP45G‑WALTER Label: Fräswendeschneidplatte BCMT160550R‑G55 WSP45G Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Grade: WSP45G Chipbreaker: G55 Shape: Parallelogram 75° Free cutting angle: 7° Corner radius code: 5 Insert size code: 16 Thickness code: 05 Execution: T Tolerance class: M Applicable material groups: P / M / S Facts Free angle: 7° Tolerance class: M Insert size: 16 Thickness code: 05 Corner radius code: 5 Special features Tiger·tec Gold PVD coated carbide grade Robust chip control with G55 geometry Parallelogram 75° form for stable engagement Suited for steel, stainless steel and heat‑resistant superalloys Designed for versatile milling applications FAQ What materials is this insert suitable for? The BCMT160550R‑G55 WSP45G is designed for machining steel, stainless steel and high‑temperature alloys (ISO groups P, M and S), offering secure chip control and stable cutting edges across these materials. Which coating and grade does this insert use? The insert uses the Tiger·tec Gold coating technology in the WSP45G coated‑carbide grade, optimised for wear resistance and thermal stability during milling operations. How does the G55 chipbreaker affect machining? The G55 chipbreaker is engineered to generate short, controllable chips and reduce built‑up edge, improving surface finish and process reliability in both roughing and semi‑finishing passes. What machine tasks suit the parallelogram 75° geometry? Parallelogram 75° inserts provide a balanced force distribution ideal for heavy engagement milling and interrupted cuts, delivering better vibration dampening and predictable tool behaviour. Is this insert compatible with standard toolholders for BCMT geometry? Yes, the BCMT‑format insert conforms to common clamping systems for this geometry; selection of the correct holder should reflect the intended feed and radial engagement to achieve optimal results. The Walter AG (brand: Walter Tools) and related trademarks are the property of their respective owners. Protected trademarks and trade names are used for explanation only. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
BCMT160560L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for stable chip formation and extended tool life; the 7° clearance and parallelogram geometry ensure secure cutting in steel and cast iron. Order the BCMT160560L-G55 WKP35G directly via Metav Werkzeuge or ask the consultants for application advice. BCMT160560L-G55 WKP35G indexable milling insert — Tiger·tec Gold, for steel and cast iron — Walter Tools A BCMT160560L-G55 WKP35G insert designed for high-process milling of steel and cast iron, combining coated carbide performance with a chipbreaker optimised for industrial machining Tiger·tec Gold coating for long tool life Suitable for steel and cast iron machining 7° clearance for secure cutting geometry Parallelogram 75° shape, 0.6 mm corner radius Consistent performance on steel and cast iron The WKP35G grade, part of the Tiger·tec Gold family, is engineered for the thermal and mechanical demands of machining steel and cast iron. Its coating and substrate combination improve resistance to abrasive wear and stickiness, which leads to more predictable tool life and fewer unplanned tool changes. In practical terms, this stability reduces downtime and supports continuous production runs where consistent part quality is required. The result is measurable process reliability and fewer interruptions in the production flow. Coating and geometry that extend tool life A specialised coating from the Tiger·tec Gold series protects the cutting edge under elevated temperatures and abrasive conditions. Combined with the G55 chipbreaker and the Parallelogram 75° form, the insert maintains a controlled chip flow and stable cutting forces. The 7° clearance supports secure engagement and smooth entry, while the 0.6 mm corner radius helps distribute cutting stresses and improves edge robustness. These engineered details translate into longer intervals between indexings and a more reproducible surface finish. Enhanced process reliability and economic benefit Delivered to tolerance class M, the insert ensures dimensional consistency, which simplifies tool set-up and repeatable results across batches. Reliable indices and stable cutting behaviour lower the risk of scrap and rework, improving overall equipment effectiveness. For production environments where throughput and repeatability matter, the combination of grade, coating and geometry produces a convincing cost-benefit effect: fewer tool changes, steadier cycle times and predictable component quality. Practical compatibility and handling advantages The BCMT160560L-G55 WKP35G indexable plate fits standard toolholder systems for BCMT-style inserts and is sized for versatile milling operations in industrial settings. With a nominal plate size of 16 mm and a slim plate thickness, the design supports compact clamping and efficient heat dissipation in series machining. The insert’s features make it suitable for both batch production and longer continuous cycles where tool life and chip control are decisive factors. For dependable, productive milling choose the Walter Tools BCMT160560L-G55 WKP35G from Metav Werkzeuge — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Technical data SKU: BCMT160560L-G55-WKP35G-WALTER Article: BCMT160560L-G55 WKP35G Product type: Fräswendeschneidplatte Series: Tiger·tec Gold Grade: WKP35G Manufacturer: Walter Tools Facts Plate size: 16 mm Plate thickness: 0.5 mm Clearance angle: 7° Corner radius: 0.6 mm Shape: Parallelogram 75° Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: G55 Material class: P / K (steel and cast iron) Execution: T Series description: High-performance coated carbide for steels and cast irons FAQ What materials is this insert suited for? The BCMT160560L-G55 WKP35G insert is specified for P and K groups, meaning it is suitable for machining steel and cast iron with coated-carbide performance. How does the Tiger·tec Gold coating help production? The Tiger·tec Gold coating increases resistance to abrasive wear and thermal loads, which for the WKP35G grade leads to longer tool life and more consistent machining results. What does the G55 chipbreaker provide? The G55 chipbreaker on the insert improves chip control for general milling applications, promoting stable cutting and reducing the risk of chip-related interruptions. Is the insert compatible with standard BCMT toolholders? Yes, the BCMT160560L-G55 WKP35G is designed for BCMT-style toolholder systems and can be integrated into common milling tool assemblies. What are the key geometric advantages of this insert? The Parallelogram 75° form, 7° clearance and 0.6 mm corner radius combine to deliver secure cutting engagement, stable forces and improved edge strength for industrial milling. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160560L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold PVD coating with the WSP45G grade delivers long-lasting cutting edges and broad material versatility; the parallelogram geometry with a 7° clearance ensures stable chip control and repeatable results. Order directly via Metav Werkzeuge or consult our specialists for process optimisation. BCMT160560L-G55 WSP45G milling insert (Parallelogram 75°, Tiger·tec Gold) – Walter Tools The BCMT160560L-G55 WSP45G is a parallelogram milling insert engineered for demanding milling of Stahl, rostfreier Stahl and heat‑resistant alloys, offering robust edge stability and consistent surface finish. Tiger·tec Gold PVD coating for durable edges Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 75° geometry with 7° clearance G55 chipbreaker for controlled chip formation Longer tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade provides a balance of wear resistance and toughness that is especially valuable in milling. Coating layers produced by PVD reduce abrasive wear while the substrate supports thermal stability; this means the cutting edge is preserved longer under the high temperatures typical when machining Stahl and rostfreier Stahl. For users, the result is fewer tool changes, more predictable cycle times and lower overall process costs. The P/M/S designation clarifies material compatibility according to ISO groups, where P covers general steel, M denotes rostfreier Stahl and S refers to heat‑resistant superalloys and Titan. Stable cutting and reproducible results from geometry The insert’s parallelogram 75° form and 7° clearance angle are designed to deliver a favourable shear angle and secure cutting engagement. A clear chip control strategy is implemented through the G55 chipbreaker, which reduces the risk of built‑up edge and supports consistent chip evacuation. The corner radius contributes to edge strength and surface finish; in practice this geometry reduces vibration and helps maintain component tolerances during higher feeds or interrupted cuts. These factors combine to improve part quality and reduce secondary operations. Broad application scope and process efficiency Built for versatile milling tasks, the grade supports a wide range of materials — from unalloyed and alloyed Stahl to demanding high‑temperature alloys. This flexibility allows tool inventories to be simplified while maintaining process reliability. Economically, using a single insert family for multiple applications reduces storage complexity and accelerates tool selection. The robust edge stability associated with the grade leads to predictable tool life, which supports more accurate production planning and lower per‑part costs. Practical integration and handling in the shop Tolerance class M and the standard insert design ensure compatibility with common toolholders used for indexable milling; the insert size and thickness conform to established mounting interfaces for rapid replacement. The indexable format allows faults to be rectified simply by indexing or replacing the insert, shortening downtime. Information such as the chipbreaker type, grade and coating are printed or documented on the specification sheet, enabling straightforward process documentation and repeatable set‑up across machines. Contact Metav Werkzeuge for tailored application advice on the Walter Tools BCMT160560L-G55 WSP45G; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: BCMT160560L-G55-WSP45G-WALTER Designation: BCMT160560L-G55 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Core technical figures Clearance angle: 7° Insert size: 16 Corner radius: 6 Plate thickness: 05 Tolerance class: M Design & special features Tiger·tec Gold PVD‑coated carbide Grade: WSP45G Material suitability: P / M / S Parallelogram 75° insert form Chipbreaker: G55 Execution: T FAQ Which materials is this insert suited for? The BCMT160560L-G55 WSP45G insert from Walter Tools is specified for machining P, M and S groups, namely Stahl, rostfreier Stahl and heat‑resistant superalloys including Titan. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSP45G grade enhances wear resistance and thermal stability, which helps the insert maintain cutting edge integrity during prolonged milling of abrasive or heat‑generating materials. How does the parallelogram 75° geometry affect milling performance? Parallelogram 75° geometry improves the cutting engagement and enables favourable chip flow; combined with the G55 chipbreaker it delivers stable cutting and consistent surface quality when used in appropriate toolholders. What does tolerance class M mean for mounting and reproducibility? Tolerance class M indicates medium manufacturing tolerances and ensures compatibility with standard indexable milling toolholders, supporting repeatable positioning and straightforward insert replacement. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (trading as Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned exclusively for explanation; no affiliation exists between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
BCMT160560R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the G55 chipbreaker and robust parallelogram geometry for productive milling of steel and cast iron; order the BCMT160560R‑G55 WKP35G directly via Metav Werkzeuge or consult our specialists for machining advice. BCMT160560R-G55 WKP35G Fräswendeschneidplatte (milling insert) – Tiger‑tec Gold, for steel & cast iron, Walter Tools The BCMT160560R‑G55 WKP35G is a 75° parallelogram indexable milling insert engineered for high‑productivity finishing and semi‑roughing of steel and cast iron components. Tiger‑tec Gold coating for extended tool life Optimised G55 chipbreaker for reliable chips Parallelogram 75° form for versatile milling Suited to steel and cast iron machining Consistent chip control speeds up production The combination of the G55 chipbreaker with the Tiger‑tec Gold coating ensures stable chip formation and reduced rework. Designed for typical steel and cast iron machining conditions, this indexable insert stabilises the cutting process and helps maintain constant surface quality across batches. The chipshape control reduces the risk of built‑up edge and eases chip evacuation in shoulder and slot milling, which supports shorter cycle times and improved process reliability. Longer tool life through advanced coating and edge geometry The coated carbide grade WKP35G, part of the Tiger‑tec Gold family, offers a balance of wear resistance and edge strength that benefits recurring production runs. The coating reduces abrasive wear when machining cast iron and fights thermal softening when tackling steels, so insert replacements become less frequent. Combined with the insert’s specified corner radius and the 7° relief angle, the design promotes robust edge security and predictable flank wear, translating into fewer tool changes and steadier manufacturing costs. Geometry and versatility for adaptable machining strategies A parallelogram 75° form provides flexible axial and radial engagement while maintaining reliable seating in standard BCMT pockets. The insert’s dimensions and the available 05 plate thickness suit diverse cutter bodies, letting planners choose stepover and feedrates to favour either throughput or finish. Compatibility with both P (steel) and K (cast iron) workpiece groups makes the insert a practical choice for mixed‑product shops that require a single, dependable solution for multiple materials. For process planning or to place an order for the BCMT160560R‑G55 WKP35G from Walter Tools, contact Metav Werkzeuge for tailored recommendations and rapid delivery: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: BCMT160560R-G55-WKP35G-WALTER Designation: BCMT160560R-G55 WKP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Plate size: 16 Plate thickness: 05 Corner radius: 6 Relief angle: 7° Tolerance class: M Special features Grade: WKP35G (coated carbide) Chipbreaker: G55 Shape: Parallelogram 75° Material suitability: P (steel), K (cast iron) Execution: T FAQ What materials is this insert suitable for? The BCMT160560R‑G55 WKP35G is specified for steel (P) and cast iron (K) applications and is optimised to handle the thermal and abrasive demands typical of these groups. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating reduces abrasive wear and enhances thermal resistance, which extends the service life of the WKP35G grade under continuous milling of steels and cast irons. Which chipbreaker is fitted and what benefit does it deliver? The insert uses the G55 chipbreaker, which offers improved chip control for reliable evacuation and reduced tendency for built‑up edge during slotting and face milling. Is this insert compatible with standard BCMT toolholders? Yes, the BCMT form is intended for standard BCMT pockets; the parallelogram 75° geometry supports secure seating and predictable cutting engagement. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer.
BCMT160560R-G55 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of a Tiger‑tec Gold coating and the WPP35G grade for efficient steel machining; the result is extended tool life and stable chip formation. Order the insert directly via Metav Werkzeuge or request consultation for machining recommendations. BCMT160560R-G55 WPP35G milling indexable insert (for steel) — Walter Tools The BCMT160560R-G55 WPP35G is a precision milling insert engineered to deliver consistent performance in steel (ISO P) machining, combining a specialised chipbreaker and Tiger‑tec Gold coating for industrial milling applications. Tiger‑tec Gold coating for extended tool life G55 chipbreaker for reliable chip control 7° clearance for stable cutting geometry Parallelogram 75° form for versatile engagement Maximised productivity for steel machining The insert is designed around the WPP35G grade and Tiger‑tec Gold technology to address the thermal and mechanical demands of steel cutting. As a coated carbide grade optimised for ISO P applications, the insert reduces flank wear and preserves edge integrity during sustained cuts. The tolerance class M ensures repeatable seating in standard toolholders, which helps maintain cycle times and reduce unexpected stoppages. This focus on measurable process stability translates into lower overall machining costs and predictable component quality. Reliable chip control and consistent process stability Chip management is central to maintaining throughput and surface finish. The integrated G55 chipbreaker offers controlled fragmentation and evacuation, particularly during medium to high cutting volumes. The Parallelogram 75° geometry, together with the 7° clearance angle, provides a secure cutting engagement and predictable cutting forces, which stabilises the machining process and reduces chatter. For workshops seeking to optimise fixture life and downstream handling, this combination supports more consistent part quality and fewer manual interventions. Robust design that reduces downtime Constructed for industrial use, the insert features a defined corner radius 6 and size 16 format that balance strength and edge versatility. The grade’s composition and the coating technology work together to resist abrasive wear while retaining sufficient toughness for interrupted cuts commonly encountered in production milling. The result is fewer indexings and a longer service interval for tool sets, contributing to greater machine uptime and a smoother production flow. The insert’s clear specification and stable clamping behaviour aid inventory management and process planning. For reliable steel milling with a proven Tiger‑tec Gold grade, contact Metav Werkzeuge to source the Walter Tools BCMT160560R-G55 WPP35G insert and obtain tailored machining advice. Technical Data SKU: BCMT160560R-G55-WPP35G-WALTER Article: BCMT160560R-G55 WPP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Size: 16 Corner radius: 6 Clearance angle: 7° Tolerance class: M Thickness: 05 Special features Series: Tiger‑tec Gold Grade: WPP35G — coated carbide Chipbreaker: G55 Application: Steel (ISO P) Geometry: Parallelogram 75° FAQ Which materials is this insert suitable for? The BCMT160560R-G55 WPP35G insert from Walter Tools is designed primarily for steel (ISO P) machining and is optimised for the heat and chip-formation characteristics typical of these materials. What advantage does the G55 chipbreaker provide? The G55 chipbreaker controls chip shape and evacuation to reduce built-up edge and improve process reliability, supporting consistent surface quality and safer chip handling in production environments. What does the Tiger‑tec Gold coating mean in practice? Tiger‑tec Gold is a coating technology that enhances wear resistance and thermal stability; in the WPP35G grade it contributes to longer tool life and stable cutting performance during extended milling cycles. What are the key geometric specifications of the insert? The insert features a Parallelogram 75° form, size 16, corner radius 6, and a 7° clearance angle, with tolerance class M for repeatable seating. Is the WPP35G grade better for roughing or finishing operations? The WPP35G grade balances wear resistance and toughness, making it suitable for a range of operations from general roughing to many semi-finishing tasks on steel; selection should follow specific cutting parameters and part requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer (Walter Tools).
BCMT160560R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Die Kombination aus WSM45X-Schneidstoff, robuster Parallelogram 75°-Geometrie und dem G55-Spanformer sorgt für sichere Spanbildung und konstante Bearbeitungsergebnisse; die Wendeschneidplatte eignet sich besonders für den Einsatz an rostfreiem Stahl und hitzebeständigen Superlegierungen. Bestellungen und Anwendungsfragen gerne über Metav Werkzeuge – Beratung steht zur Verfügung. BCMT160560R-G55 WSM45X — Milling insert (Parallelogram 75°, 6 corner radius) by Walter Tools A BCMT160560R-G55 WSM45X milling insert engineered for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys WSM45X coated carbide grade for heat resistance Parallelogram 75° geometry for stable milling 6 corner radius for enhanced edge strength Chipbreaker G55 for controlled chip formation Designed for reliable high-temperature performance and consistent metal removal The WSM45X grade is a coated carbide formulation optimised for materials that generate heat and challenge the cutting edge. With the G55 chipbreaker and a geometry tailored to heavy engagement, the insert promotes stable chip formation and reduced risk of built-up edge during extended cuts. These characteristics translate into longer tool life per edge and fewer interruptions for insert changes, supporting efficient, predictable production cycles. Geometry and robustness that reduce downtime and protect the cutting edge The parallelogram 75° shape combined with a 6 corner radius and a 7° clearance angle delivers mechanical strength where it matters most: at the cutting edge and the insert seat. The robust profile minimises chipping under interrupted cuts and offers a secure clamping interface in standard BCMT tool holders. This results in steady performance when machining challenging workpieces and helps maintain dimensional accuracy across batches. Practical application guidance for process planners and operators Designed for ISO material groups S and M, the insert is particularly suitable for rostfreier Stahl and heat-resistant superalloys; the WSM45X grade balances wear resistance with edge stability for these alloys. Selecting the correct feed and cutting speed in conjunction with coolant strategy will optimise performance: the grade supports elevated temperatures, so process parameters can be adjusted toward productivity while monitoring edge condition and component surface finish. Trusted supplier background and process confidence Produced under the Walter Tools series, this insert benefits from a manufacturing philosophy focused on stable cutting edges and reproducible results. The combination of a specialised coated carbide grade with a dedicated chipformer provides a reliable baseline for challenging milling operations, reducing process variability and supporting higher first-pass yield. For buyers seeking tools that deliver repeatable performance, this insert represents a technically sound choice. For applications requiring reliable high-temperature milling of rostfreier Stahl and superalloys, consider the Walter Tools WSM45X inserts — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: BCMT160560R-G55-WSM45X-WALTER Article designation: BCMT160560R-G55 WSM45X Product type: Milling insert Manufacturer: Walter Tools Grade / Sort: WSM45X Chipbreaker: G55 Geometry: Parallelogram 75° Clearance angle: 7° Corner radius: 6 Plate size: 16 Plate thickness: 05 Tolerance class: M Material designation: S / M Series: Walter Schneidstoffsorte - Serie offen Core technical figures Clearance angle: 7° Corner radius: 6 Plate size: 16 Plate thickness: 05 Tolerance class: M Special features Coated carbide grade WSM45X Suitable for rostfreier Stahl and superalloys (ISO groups M and S) Chipbreaker G55 for controlled chip formation Parallelogram 75° geometry for secure clamping and stable cutting Robust design for heavy-duty milling FAQ What materials is this insert suitable for? The BCMT160560R-G55 WSM45X insert from Walter Tools is designed for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), offering wear resistance and edge stability for those materials. What are the key geometric characteristics of the insert? The insert features a parallelogram 75° geometry, a corner radius of 6 and a clearance angle of 7°, together with the G55 chipbreaker to ensure stable chip control and strong edge support. Which grade and coating does the insert use? The cutting grade is WSM45X, a coated carbide variety formulated by Walter Tools to perform under elevated cutting temperatures and to provide consistent edge life. Is the insert suitable for high metal removal rates? With its robust geometry and the WSM45X grade, the insert is intended for demanding machining where secure chip formation and edge stability allow productive material removal within the process window. How does the G55 chipbreaker influence machining? The G55 chipbreaker is designed to shape chips and support reliable evacuation under interrupted or heavy cuts, reducing the likelihood of built-up edge and promoting surface quality. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the listed brands. The offered article is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com