Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
BCMT160512R-G55 WPP35G WPP35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with a robust 1.2 mm corner radius and a dedicated G55 chipbreaker results in an insert that delivers consistent edge life and reliable chip control for steel machining; order the BCMT160512R-G55 WPP35G directly via Metav Werkzeuge or ask our consultants if needed. BCMT160512R-G55 WPP35G milling indexable insert — Tiger·tec Gold coating, for steel (Walter Tools) The BCMT160512R-G55 WPP35G is a milling indexable insert engineered for productive steel machining, combining a coated carbide grade with a parallelogram 75° geometry and a chipbreaker tuned to ISO P materials Tiger·tec Gold coated carbide Parallelogram 75° shape for stable engagement 1.2 mm corner radius for robust edge strength Optimised for steel machining (ISO P) Greater machining reliability through advanced coating and substrate The combination of a coated carbide substrate and the Tiger·tec Gold technology provides notable wear resistance and thermal stability under the cutting conditions typical for steels. Coating layers reduce abrasive and adhesive wear while the substrate maintains toughness; together these characteristics extend the usable life of the cutting edge and reduce unexpected tool changes. For production environments this means fewer interruptions and more predictable tool-cost planning. Consistent chip control and stable engagement for higher throughput A G55 chipbreaker designed for ISO P workpieces improves chip formation and evacuation, lowering re-cutting and heat concentration at the cutting edge. The parallelogram 75° form gives stable entry conditions and consistent cutting geometry during flank engagement, while the 7° clearance angle helps control contact forces. These combined geometry elements transfer into smoother toolpaths and less vibration, supporting higher feed rates and improved process stability. Robust edge design that preserves surface finish and repeatability The 1.2 mm corner radius balances edge strength and surface quality: it resists chipping in interrupted cuts while still allowing fine finishes when required. The insert’s moderate thickness and the chosen tolerance class contribute to consistent seating and repeatable positioning in the cutter body, which simplifies setup and reduces variability between indexings. For manufacturers seeking reproducible part tolerances, this insert contributes to consistent component quality across batches. Application-focused productivity and practical handling in the workshop Designed for steel (ISO P), the insert’s characteristics favour a wide range of machining tasks from roughing to semi-finishing without complex parameter tuning. The coated grade emphasises a reliable trade-off between wear resistance and toughness, lowering the frequency of insert changes and supporting continuous production. For further optimisation of cutting data or material-specific recommendations, technical consultation is available to align insert choice with machine capability and cycle-time targets. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and to arrange purchase or technical consultation by eMail (info@metav-werkzeuge.com) or phone (+49 2822 7131930) Technical Data SKU: BCMT160512R-G55-WPP35G-WALTER Article designation: BCMT160512R-G55 WPP35G Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger-tec Gold Sort: WPP35G Facts Size: 16 Corner radius: 1.2 mm Clearance angle: 7° Plate thickness: 0.5 mm Plate form: Parallelogram 75° Tolerance class: M Special features Coating: Tiger·tec Gold Substrate: coated carbide Chipbreaker: G55 Material suitability: Steel (ISO P) Execution: T WPL designation without sort: BCMT160512R-G55 UID: BCMT160512R-G55-WPP35G-WALTER FAQ What materials is this insert designed for? This insert is optimised for steel machining (ISO P); the WPP35G grade and the Tiger·tec Gold coating are tuned to handle the heat and chip formation typical of steel. Which chipbreaker is fitted and what benefit does it bring? The insert features the G55 chipbreaker, which improves chip control for ISO P materials and reduces re-cutting, supporting stable cutting and improved surface quality. How does the parallelogram 75° shape affect cutting performance? The parallelogram 75° geometry provides stable engagement and repeatable cutting angles, which helps reduce vibration and supports higher feed rates during milling. What does the 1.2 mm corner radius mean for production use? A 1.2 mm corner radius increases edge robustness against chipping in interrupted or heavy cuts while still delivering acceptable surface finish in semi-finishing operations. Where can technical advice or ordering be obtained? Metav Werkzeuge provides application advice and ordering options for Walter Tools inserts; consult the technical team for cutting-data matching and toolholder recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160512R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a thermally stable, WSM45X coated carbide grade and precise geometry for reliable performance in demanding milling operations; the chipbreaker G55 provides controlled swarf and consistent surface quality. Order the insert directly via Metav Werkzeuge or request tailored advice from our consultants. BCMT160512R-G55 WSM45X — Milling insert for stainless steels and superalloys (Walter Tools) The BCMT160512R-G55 WSM45X is a parallelogram 75° milling insert optimised for machining stainless steels and heat-resistant superalloys Coated carbide grade WSM45X Chipbreaker G55 for controlled swarf Parallelogram 75° form with 1.2 mm radius Suitable for stainless steels and superalloys Precise performance in demanding materials The WSM45X grade combines a coated carbide substrate with a chemistry tailored for high-temperature strength, making the insert well suited to machining stainless steels and heat-resistant superalloys. This material group tends to produce high cutting temperatures and challenging built-up edges; the selected grade supports secure chip formation and improved edge stability, which reduces the need for frequent regrinding and contributes to more predictable cycle times. The BCMT160512R-G55 designation indicates the insert geometry and chipbreaking concept, ensuring compatibility with common milling holders. Controlled swarf and improved surface quality A dedicated chipbreaker G55 ensures that chips are segmented and evacuated consistently, which lowers the risk of surface damage and secondary machining. Controlled swarf reduces congestion at the cutting zone, helping to maintain coolant access and steady cutting forces. The result is a more consistent component finish and fewer interruptions for chip clearing, enhancing throughput in series production and single-piece runs where surface integrity matters. Geometry engineered for repeatable results The parallelogram 75° form with a 1.2 mm corner radius and a 7° relief angle offers a stable cutting line and secure clamping in the pocket, supporting predictable tool life and repeatable part quality. The insert size (16 mm) and nominal corner radius are designed to balance edge strength with the ability to achieve accessible cutting profiles in shoulder and slot milling. These geometric choices translate into fewer vibrations and consistent dimensional outcomes, which is particularly beneficial when machining tough-to-cut alloys. Productivity through fit-for-purpose specification Specified tolerance class M and the open-series Walter grade mean the insert is produced for robust industrial use and a broad range of practical milling scenarios. Where high process stability and repeatable performance are priorities, this insert supports productive machining by combining edge reliability with a chip control system tuned for demanding materials. Selection of the correct cutter body and cutting conditions will maximise the advantages of this insert and help achieve lower overall machining costs through reduced downtime and rework. Contact Metav Werkzeuge for expert guidance on integrating Walter Tools BCMT160512R-G55 WSM45X inserts into existing milling setups and to confirm suitability for specific stainless steel or superalloy applications Technical data Article number: BCMT160512R-G55-WSM45X-WALTER Article designation: BCMT160512R-G55 WSM45X Manufacturer: Walter Tools Product type: Milling indexable insert Grade / series: Walter Schneidstoffsorte - Serie offen Facts Size: 16 mm Corner radius: 1.2 mm Relief angle: 7° Form angle: 75° Tolerance class: M Special features Coated carbide grade WSM45X Chipbreaker: G55 Material suitability: stainless steels (M), superalloys / titanium (S) Plate form: parallelogram 75° Series designation: open series, Walter Schneidstoffsorte Execution: T FAQ Is this insert suitable for machining stainless steels? Yes. The BCMT160512R-G55 WSM45X is specified for stainless steels (material group M) and its grade supports secure chip formation and edge stability when machining such materials. What advantage does the G55 chipbreaker provide? The chipbreaker G55 produces segmented, controllable chips that reduce the risk of surface damage and help maintain stable cutting conditions, improving component finish and process reliability when using this insert. Can this insert be used for titanium or superalloys? The grade is designed to handle heat-resistant superalloys and titanium (material group S) depending on cutting geometry and parameters; its thermal resistance and edge strength make it a viable option for these materials. How does the parallelogram 75° form affect milling performance? A parallelogram 75° form positions the cutting edge for positive engagement and secure clamping, which increases edge stability and reduces vibration during shoulder and face milling operations. What does the tolerance class M mean for production? Tolerance class M indicates manufacturing precision suited to industrial applications; it ensures consistent insert dimensions for repeatable positioning and predictable machining results with compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
BCMT160512R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, versatile material capability and the Tiger‑tec Gold coating for consistent productivity; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. BCMT160512R-G55 WSP45G — Tiger‑tec Gold milling insert for steel, stainless steel and superalloys (Walter Tools) The BCMT160512R-G55 WSP45G is a parallelogram milling insert engineered for versatile finishing and medium‑to‑heavy milling in steel, stainless steel and heat‑resistant alloys. Tiger‑tec Gold PVD coating for long life Versatile for steel, stainless and superalloys Parallelogram 75° for stable milling 1.2 mm corner radius, 7° clearance Consistent cutting performance with advanced coating The insert combines the Tiger‑tec Gold technology with a proven PVD coated cemented carbide to deliver stable cutting even under thermal stress. The coating supports secure chip formation and prolongs edge life when machining typical steels and tougher materials. Thanks to the coated grade WSP45G, the tool counters built‑up edge and maintains cutting geometry, which results in fewer insert changes and a steadier production flow. This focused performance reduces downtime and improves process predictability for series production. Geometry that improves stability and process control The parallelogram 75° shape and the defined 1.2 mm corner radius contribute to enhanced edge strength and restrained cutting forces during interrupted or variable engagement. A 7° clearance angle helps to avoid rubbing and excessive heat generation at the flank, supporting improved surface quality. The insert’s chipbreaker G55 is designed for controlled chip formation across a range of feeds, helping to keep the machining process predictable and safeguarding the toolholder from erratic chip flow. Broad applicability reduces tool inventory and simplifies planning Designed for ISO groups P, M and S, the grade supports machining of unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium alloys. This multi‑material capability lowers tool family complexity and enables a single insert type to cover roughing and finishing steps across diverse components. Specification and cutting data for the BCMT160512R-G55 WSP45G can be adapted to individual setups; for tailored feed and speed recommendations, Metav Werkzeuge provides application support and cutting data sheets. Quality of finish and economy through optimised chip control The combination of a dedicated chipbreaker (G55) and the Tiger‑tec Gold substrate results in a balance between surface quality and tool life. Controlled chip evacuation reduces rework and machine downtime, while a durable cutting edge extends the number of productive passes per insert. For applications where repeatability and part integrity matter, the insert offers both performance and economic advantage by lowering the total cost per component through extended tool life and consistent results. Contact Metav Werkzeuge to specify the Walter Tools Tiger‑tec Gold insert for the intended application or request tailored cutting data from our consultants Technical Data Article number: BCMT160512R-G55-WSP45G-WALTER SKU / Label: BCMT160512R-G55 WSP45G Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Chipbreaker: G55 Form: Parallelogram 75° Execution: T Tolerance class: M Facts Size: 16 Corner radius: 1.2 mm Clearance angle: 7° Thickness code: 05 Shape angle: 75° Material group suitability: P / M / S Special features Coated cemented carbide (Tiger‑tec Gold) Chip control for interrupted and continuous cuts Versatile grade for a wide material range Designed for milling applications and repeatable performance FAQ Which materials are recommended for this insert? The BCMT160512R-G55 WSP45G insert by Walter Tools is suitable for machining ISO material groups P (steel), M (stainless steel) and S (superalloys/titanium). What is the purpose of the G55 chipbreaker? The G55 chipbreaker on the BCMT160512R-G55 WSP45G promotes controlled chip formation and evacuation, improving surface finish and process stability in milling operations. How does the parallelogram 75° form affect cutting? The parallelogram 75° form reduces cutting forces on the toolholder and enhances edge strength, resulting in steadier milling behaviour and improved productivity with the Walter Tools insert. Are there application recommendations or cutting data available? Application tables and recommended cutting parameters are available for the BCMT160512R-G55 WSP45G; Metav Werkzeuge can provide tailored cutting data for specific machines and materials. Is the insert intended for roughing, finishing or both? With its 1.2 mm corner radius and Tiger‑tec Gold coating, the insert is suitable for both medium finishing and productive roughing, depending on the chosen cutting data and machine setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanation only and do not imply any affiliation with or endorsement by the trademark owners.
BCMT160516L-G55 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WKP35G grade and a stabilising 7° relief to achieve consistent, productive milling of steel and cast iron; order the insert directly via Metav Werkzeuge or contact the team for tailored advice. BCMT160516L-G55 WKP35G — Milling insert, Tiger·tec Gold, for steel and cast iron (Walter Tools) The BCMT160516L-G55 WKP35G is a precision milling insert engineered for high productivity in steel and cast iron machining applications Tiger·tec Gold coating for high wear resistance WKP35G grade for steel and cast iron machining Parallelogram 75° shape for versatile milling 7° relief and 1.6 mm corner radius for stability Longer tool life through advanced coating and grade The coated carbide composition in this indexable insert, identified by the WKP35G designation, combines a durable substrate with the Tiger·tec Gold coating to deliver improved wear resistance and thermal stability under continuous milling. In practice, this means fewer tool changes and longer uninterrupted production runs when machining common steel grades and cast iron. The coating technology reduces abrasive wear and helps maintain a consistent cutting edge, which translates directly to predictable component tolerances and reduced scrap rates. For shops focused on repeatable throughput, the combination of grade and coating is a rational investment in process reliability. Geometry that stabilises the cut and improves chip control The insert’s parallelogram 75° form and a relief angle of 7° provide a reliable entry geometry for a wide range of milling operations, balancing robustness and cutting access. The 1.6 mm corner radius helps distribute cutting forces, reducing vibration and improving surface finish on interrupted cuts. Combined with the G55 chipbreaker, the geometry actively shapes chips for safer evacuation and reduced tool loads, which is particularly valuable when machining short‑to‑medium chips in steel and brittle chips in cast iron. For less experienced operators, the terms mean: the design promotes steady cutting, easier chip handling and improved component finishes. Measurable productivity gains and lower operating costs Using an insert optimised for both steel and cast iron reduces tool variety in mixed‑material production and simplifies tooling logistics. The coated grade and stable geometry result in longer edge life and fewer regrinds or replacements, which lowers per‑part tooling costs and increases machine uptime. From a rational perspective, fewer tool interventions and consistent edge life contribute to a better cost‑benefit ratio over production cycles. For operations aiming to raise throughput without compromising component quality, this insert supports process acceleration and consistent output. Practical application advice and process guidance The insert is intended for milling applications where a balance of wear resistance and chip control is required. It performs best in conventional and climb milling strategies tailored to the workpiece material groupings P (steel) and K (cast iron). Selecting appropriate cutting parameters—taking into account spindle speed, feed per tooth and depth of cut—will further extend edge life and performance. If cutting data or optimisation for a specific machine or material is required, technical consultation is recommended to align process parameters with production goals and to ensure the chosen insert geometry meets fixture and toolholder constraints. For cutting data, stock availability or application recommendations for Walter Tools inserts, contact Metav Werkzeuge for expert consultation and rapid delivery options. Technical data SKU: BCMT160516L-G55-WKP35G-WALTER Designation: BCMT160516L-G55 Full designation: BCMT160516L-G55 WKP35G Series: Tiger-tec Gold Grade: WKP35G Manufacturer: Walter Tools Measurements Relief angle: 7° Corner radius: 1.6 mm Plate size: 16 Plate thickness: 05 Plate form: Parallelogram 75° Tolerance class: M Special features Coating technology: Tiger·tec Gold Material suitability: P (steel), K (cast iron) Chipbreaker: G55 Coated carbide insert Execution: T FAQ Is this insert suitable for both steel and cast iron? Yes. The BCMT160516L-G55 WKP35G insert is specified for material groups P (steel) and K (cast iron), offering balanced wear resistance and chip control for these substrates. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases thermal stability and abrasive wear resistance on the insert, which helps extend edge life and maintain consistent cutting performance in milling operations. How does the G55 chipbreaker affect machining? The G55 chipbreaker shapes and breaks chips to improve evacuation and reduce the risk of chip entanglement, supporting safer, more stable milling with improved surface results. Can the insert be used for interrupted cuts? Yes; the combination of a 1.6 mm corner radius and the insert geometry provides additional edge strength and helps manage the forces encountered during interrupted milling. What is the full product designation to order? Order the BCMT160516L-G55 WKP35G insert from Walter Tools using SKU BCMT160516L-G55-WKP35G-WALTER for unambiguous identification. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not imply any affiliation with our company. The item offered is original, factory‑new merchandise of the manufacturer.
BCMT160516L-G55 WSP45G Walter Tools Wendeplatten
Benefit from the Tiger‑tec Gold coating and the versatile WSP45G grade combined with precise geometry for consistent milling performance; order directly via Metav Werkzeuge or consult our specialists for application advice and fast supply. BCMT160516L-G55 WSP45G milling insert — Tiger‑tec Gold, P/M/S application, Walter Tools The BCMT160516L-G55 WSP45G is a parallelogram 75° milling insert designed for versatile milling of steel, stainless steel and heat‑resistant alloys in industrial machining environments. Tiger‑tec Gold PVD coating Grade WSP45G for tough milling Parallelogram 75° geometry Corner radius 1.6 mm for edge stability High‑performance coating and grade for productive milling The combination of the Tiger‑tec Gold coating with the WSP45G carbide grade delivers a balance of wear resistance and toughness that is tailored for milling operations on a wide range of materials. The PVD coating reduces flank wear and supports a more stable cutting edge under thermal stress, while the grade is formulated for secure chip formation when machining P / M / S groups (steel, stainless steel and heat‑resistant superalloys/titanium). This technical pairing translates into longer tool life and fewer indexed changes, which enhances process efficiency on high‑mix production lines as well as in demanding batch runs. Geometry engineered for chip control and surface quality The parallelogram 75° geometry together with a relief angle of 7° and a corner radius of 1.6 mm provides a favourable cutting kinematic for milling tasks that require repeatable surface finish and tool stability. The integrated G55 chipbreaker is designed to promote controlled chip segmentation and evacuation at typical feed and speed ranges for the stated material groups; this reduces recutting and the risk of build‑up on the cutting edge. For operators unfamiliar with insert geometry, a larger corner radius increases edge strength for roughing, while the positive relief angle reduces cutting forces, supporting smoother operation on weaker setups. Practical benefits for workshop and production use With a tolerance class of M, the insert offers consistent dimensional accuracy for reliable clamping and repeatable positioning in indexable holders. The designation BCMT160516L‑G55 indicates a standardised interface that fits a wide range of toolholders, enabling quick changeover and minimised downtime. The insert is suitable for operations from medium roughing to semi‑finishing where a compromise between productivity and surface integrity is required. The overall specification supports improved process reliability—fewer interruptions, predictable tool life and consistent component quality—making this solution appropriate for job shops and industrial production alike. Choose the Walter Tools Tiger‑tec Gold grade for dependable, versatile milling and contact Metav Werkzeuge for tailored application support and prompt delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BCMT160516L-G55-WSP45G-WALTER Product type: milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Execution: T Facts Relief angle: 7° Corner radius: 1.6 mm Plate form: Parallelogram 75° Plate size: 16 Plate thickness: 05 Tolerance class: M Special features Material groups: P / M / S Chipbreaker: G55 Base designation: BCMT160516L-G55 ISO designation: BCMT160516L-G55 WSP45G Axite enrichment: PVD coated carbide; versatile, tough grade for milling Applicable materials: steel; stainless steel; heat‑resistant alloys / titanium FAQ What materials is this insert suitable for? The BCMT160516L‑G55 WSP45G milling insert by Walter Tools is specified for P / M / S, meaning it is suitable for steel, stainless steel and heat‑resistant alloys including titanium. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold PVD coating on the WSP45G grade reduces wear and improves thermal resistance, which in turn enhances tool life and supports more consistent machining results under elevated cutting temperatures. What does the G55 chipbreaker do? The G55 chipbreaker is engineered to control chip formation and evacuation during milling, reducing recutting and helping to maintain a stable cutting edge and consistent surface finish. Is the BCMT160516L‑G55 compatible with standard toolholders? The BCMT160516L‑G55 designation corresponds to a standard insert geometry that fits common indexable milling holders; check holder compatibility and clamping method before installation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160516R-G55 WKP35G WKP35G Wendeplatten - Walter Tools
The coated WKP35G grade and the Tiger·tec Gold technology deliver a robust combination of wear resistance and stable chip formation for continuous milling operations. Benefit from the optimized G55 chipbreaker and the 1.6 mm corner radius to reduce tool changes and maintain consistent part quality — order directly via Metav Werkzeuge or contact our consultants for application advice. BCMT160516R-G55 WKP35G milling insert (Parallelogram 75°) for steel and cast iron — Walter Tools The BCMT160516R-G55 WKP35G is a Tiger·tec Gold coated milling insert designed for efficient machining of steel (P) and cast iron (K) in general milling tasks. Tiger·tec Gold coating for extended tool life Optimised G55 chipbreaker for stable chips Parallelogram 75° form with 7° relief angle 1.6 mm corner radius for secure edge strength Consistently higher productivity through coated-grade performance The combination of the WKP35G grade and the Tiger·tec Gold coating is engineered to withstand the thermal and abrasive loads typical of steel and cast-iron milling. Coating technology reduces flank wear and extends cutting-edge life, which translates into fewer tool changes and improved machine uptime. By choosing a coated carbide grade optimised for P and K materials, production runs become more predictable, with lower scrap rates and a clearer cost-benefit profile for continuous operation. Fewer interruptions thanks to controlled chip formation The G55 chipbreaker is tailored to promote stable chip segmentation when machining steels and cast irons that tend to produce short or brittle chips. Improved chip control minimises recutting and the risk of built-up edge, leading to steadier feeds and feedsaving opportunities. In practical terms, this results in reduced cycle-time variability and a smoother workflow when facing mixed batch production or interrupted cuts. Robust geometry for repeatable surface quality A 1.6 mm corner radius combined with a 7° relief angle and the parallelogram 75° shape provides a strong cutting edge and dependable engagement angle, supporting repeatable dimensional accuracy and surface finish. The insert’s tolerance class M ensures consistent fitment and interchangeability across toolholders, helping maintain process capability. These geometric choices balance edge strength and cutting aggressiveness, preserving tool life while achieving the required part tolerances. Practical application guidance and compatibility This indexable insert is suitable for general milling setups where a versatile, wear-resistant cutting edge is required. The design supports a range of machining strategies — from finishing to medium-duty roughing — in steel and cast-iron components. When integrating this insert into a tooling system, select an appropriate cutter body that accepts BCMT-style parallelogram inserts and review recommended cutting data for the WKP35G grade to fully exploit the Tiger·tec Gold benefits. For complex alloys or special machining conditions, consult the technical team to optimise parameters. For tailored recommendations on Walter Tools Tiger·tec Gold inserts and to ensure the BCMT160516R-G55 WKP35G meets specific application needs, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for precise advice and availability Technical Data SKU: BCMT160516R-G55-WKP35G-WALTER Designation: BCMT160516R-G55 WKP35G Series: Tiger·tec Gold Grade: WKP35G Shape: Parallelogram 75° Chipbreaker: G55 Brand: Walter Tools Execution: T Facts Relief angle: 7° Corner radius: 1.6 mm Insert size: 16 mm Thickness: 0.5 mm Tolerance class: M Special features Coating: Tiger·tec Gold Material: Coated carbide Suitable for: Steel (P) and Cast iron (K) Chip control technology: G55 Series characteristics: High wear resistance and stable chip formation FAQ Which materials can be machined with this insert? The BCMT160516R-G55 WKP35G insert is optimised for machining steel (P) and cast iron (K), with the Tiger·tec Gold coating and WKP35G grade tailored to those ISO material groups. What advantage does the WKP35G grade provide? WKP35G delivers a coated-carbide balance of wear resistance and thermal stability; the grade increases edge life under the heat and abrasion typical of steel and cast-iron milling. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes stable, predictable chip formation, reducing the likelihood of recutting and supporting uninterrupted machining cycles. When is the parallelogram 75° form particularly useful? The parallelogram 75° geometry gives a useful compromise between accessibility and edge engagement, suitable for a variety of face and peripheral milling operations where moderate entry angles are preferred. Is the insert compatible with common BCMT toolholders? The BCMT160516R-G55 WKP35G follows the BCMT designation and tolerance class M, making it compatible with toolholders designed for BCMT parallelogram inserts; check cutter-body specifications for confirmation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any business relationship between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory-new product of the manufacturer.
BCMT160516R-G55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP35S grade for consistent chip control and extended tool life; the parallelogram geometry with a 7° relief angle and 1.6 mm corner radius supports stable, reproducible milling performance. Order the BCMT160516R-G55 WKP35S directly via Metav Werkzeuge or request specialist advice from their consultants. BCMT160516R-G55 WKP35S – Indexable milling insert, Tiger‑tec Silver, for Steel & Cast iron (Walter Tools) The BCMT160516R-G55 WKP35S is a 75° parallelogram milling insert engineered for productive machining of steel and cast iron in high‑duty milling applications Tiger‑tec Silver coating technology Grade WKP35S for steel and cast iron 7° relief angle for secure cutting 1.6 mm corner radius for edge strength Reliable cutting performance through advanced grade and chip control The combination of the WKP35S grade and the Tiger‑tec Silver coating delivers improved wear resistance and consistent cutting-edge behaviour when machining Steel (P) and Cast iron (K). The integrated G55 chipbreaker is designed to produce predictable, short chips in mixed milling conditions; this reduces the risk of entanglement and supports uninterrupted machining cycles. In practice, the chipbreaker geometry guides the cut material away from the cutting zone, lowering heat concentration and helping to maintain surface quality while prolonging insert life. This results-oriented design benefits cycle time and reduces the need for frequent tool changes. Geometry and edge design that promote reproducibility and process security The parallelogram 75° form and 7° relief angle contribute to a stable cutting platform and effective force distribution during milling. The 1.6 mm corner radius increases edge robustness for interrupted cuts and heavy radial engagement, offering a balance between edge strength and achievable surface finish. As an indexable insert, the item enables quick seat replacement and repeatable positioning, which supports lean production workflows and reduces downtime. These features emphasise process security and make the insert suitable for batch production and diverse component series where consistent part quality is required. Practical application notes and handling for optimum results When selecting cutting parameters, consider the workpiece material group: the grade is optimised for the thermal and abrasive conditions typical of Steel (P) and Cast iron (K); adjust feed and speed to match the chosen depth of cut and machine rigidity. The G55 chipbreaker performs best with moderate to heavy material removal rates where controlled chip fragmentation is needed. For set‑up, ensure appropriate seat cleanliness and correct clamping torque to maintain repeatable positioning. For additional guidance on parameter selection or to confirm suitability for specific workpiece alloys, technical support is available from Metav Werkzeuge. Email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist assistance. Contact Metav Werkzeuge for tailored selection advice on Walter Tools Tiger‑tec Silver inserts and to arrange supply or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: BCMT160516R-G55-WKP35S-WALTER Designation: BCMT160516R-G55 ISO designation: BCMT160516R-G55 WKP35S Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Facts Size: 16 Corner radius: 1.6 mm Relief angle: 7° Thickness: 05 Tolerance class: M Special features Chipbreaker: G55 Plate form: Parallelogram 75° Material suitability: Steel (P) and Cast iron (K) Execution: T Coating: Tiger‑tec Silver (coated carbide) FAQ Which materials is this insert suitable for? The BCMT160516R-G55 WKP35S is formulated for Steel (P) and Cast iron (K) applications; the WKP35S grade and Tiger‑tec Silver coating address the thermal and abrasive demands of these material groups. What advantage does the G55 chipbreaker provide? The G55 chipbreaker promotes controlled chip fragmentation and reliable swarf evacuation, which reduces rework and improves continuous machining stability with this type of indexable insert. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge strength for interrupted or heavy cuts and helps to maintain dimensional stability while still permitting a good surface finish when paired with suitable feeds. What geometry and clamping considerations are important for setup? The parallelogram 75° geometry creates defined cutting forces and requires correct seat cleanliness and clamping torque for repeatable positioning; the relief angle 7° aids in chip flow and reduces rubbing on the flank. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trade marks are used for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the stated manufacturer.
BCMT160516R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Maximise machining reliability with the combination of a WSM45X coated-carbide grade and the G55 chipbreaker for secure chip formation; the robust geometry and precise clearance minimise rubbing and support consistent production. Order directly via Metav Werkzeuge or request expert guidance from our consultants. BCMT160516R-G55 WSM45X — Milling insert, coated carbide, parallelogram 75° (Walter Tools) The BCMT160516R-G55 WSM45X is a milling insert engineered for demanding operations on stainless steels and heat‑resistant superalloys, offering stable chip control and durable cutting edges in high‑temperature machining environments Coated carbide WSM45X grade Suitable for stainless steel and superalloys Parallelogram 75° insert geometry 1.6 mm corner radius and 7° clearance Enhanced process security for demanding materials The coated‑carbide WSM45X grade is formulated to address the specific challenges of machining stainless steels (ISO group M) and superalloys/titanium (ISO group S). Thanks to its coating and substrate combination, the grade promotes stable chip control and resists edge degradation under high thermal loads. Where adhesion and built‑up edge typically reduce tool life, the tailored grade and the G55 chipbreaker work in concert to maintain a reliable cutting edge, reducing unplanned tool changes and improving overall process security for serial and batch production. Geometry that balances robustness and surface quality The parallelogram 75° geometry provides a versatile cutting orientation suited to a range of face and shoulder milling tasks while the 1.6 mm corner radius increases edge strength for interrupted cuts and contributes to improved surface finish in steady feeds. The 7° clearance minimises flank contact and heat generation, which helps preserve dimensional accuracy and reduces the risk of chatter in challenging materials. These geometric choices are designed to deliver consistent part quality with fewer fine adjustments on the machine. Operational benefits that support productivity Incorporating this indexable insert into existing toolholders is straightforward thanks to its standard format and size designation (size 16, thickness code 05). The combination of a robust corner radius and an effective chipbreaker like G55 reduces the frequency of regrinds and tip changes, which translates into lower downtime and higher effective spindle utilisation. The insert’s construction is optimised for repeatable performance under cyclical loads, helping to keep cycle times stable across varied workpiece batches. Practical application guidance and material fit The insert is particularly well suited to components where heat‑resistant alloys or stainless steels are predominant, such as aerospace primary components, power‑generation parts and demanding process engineering applications. Its capabilities are best exploited with appropriate cutting parameters for the material group (ISO M/S) and with coolant strategies that support chip evacuation where required. For customers seeking straightforward integration, the grade and chipbreaker combination offers a pragmatic route to improved machining reliability without extensive process redevelopment. Choose the Walter Tools WSM45X grade for reliable machining of stainless steels and superalloys and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: BCMT160516R-G55-WSM45X-WALTER Label: Fräswendeschneidplatte BCMT160516R-G55 WSM45X Walter Tools SKU: BCMT160516R-G55-WSM45X-WALTER Facts Insert size: 16 Corner radius: 1.6 mm Clearance angle: 7° Insert form: Parallelogram 75° Thickness code: 05 Tolerance class: M Special features Grade: WSM45X (coated carbide) Chipbreaker: G55 Series: Walter Schneidstoffsorte - Serie offen Material suitability: stainless steels (ISO M), superalloys/titanium (ISO S) Manufacturer: Walter Tools FAQ Which materials is the insert suitable for? The BCMT160516R-G55 WSM45X is designed primarily for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S), where thermal resistance and edge stability are required. What benefit does the G55 chipbreaker provide? The G55 chipbreaker promotes manageable chip shapes and secure chip evacuation, which helps to avoid built‑up edge and supports consistent surface finish when using the WSM45X grade. How does the parallelogram 75° shape affect milling performance? The parallelogram 75° geometry gives flexible cutting orientations and efficient edge engagement, improving access in shoulder and face milling while helping to maintain dimensional accuracy. Is the insert compatible with standard toolholders for size 16 inserts? The insert follows the common size designation (16) and thickness code (05), making it compatible with standard toolholders designed for BCMT‑style indexable inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
BCMT160516R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
High-performance PVD-coated grade WSP45G and the Parallelogram 75° geometry deliver stable cutting edges and consistent chip control; the 1.6 mm corner radius and 7° clearance support repeatable finishes and tool life. Benefit from broad material compatibility (P / M / S) and predictable process security — order the BCMT160516R-G55 WSP45G via Metav Werkzeuge or contact the consultants for application support. BCMT160516R-G55 WSP45G — Indexable milling insert, Tiger‑tec Gold PVD, Parallelogram 75° (Walter Tools) The BCMT160516R-G55 WSP45G is an indexable milling insert engineered for versatile finishing and medium-parameter roughing across steels, stainless steels and heat‑resistant alloys. Tiger‑tec Gold PVD coating for edge stability Suitable for P / M / S material groups Parallelogram 75° geometry for versatile milling 1.6 mm corner radius with 7° clearance Predictable chip control and longer tool life with modern coating This indexable insert is built around the Tiger‑tec Gold technology and the WSP45G grade, a PVD-coated carbide formulation optimised for toughness and wear resistance. The integrated chipbreaker G55 controls swarf formation, reducing risk of built-up edge and enabling consistent surface finish. As a result, machining cycles show improved stability and lower scrap rates, which translates to measurable productivity gains and cost effectiveness in batch and flexible production environments. Consistent performance across steel, stainless steels and superalloys The cutting grade is specified for the material groups P, M and S, covering unalloyed and alloyed steel, rostfree stainless steel and heat‑resistant superalloys including titanium. The combination of a tough substrate and PVD surface treatment supports safe chip formation under the high temperatures typical for these families. Explained simply: the insert’s chemistry and coating slow crater wear and protect the cutting edge, so repeatable dimensional accuracy and surface integrity are easier to achieve on demanding workpieces. Geometry that enhances versatility and repeatability The Parallelogram 75° form together with a 1.6 mm radius and 7° clearance offers a balanced compromise between edge strength and accessibility for narrow features. The standard size (16) and the declared tolerance class M ensure reliable seating and repeatable results when rotating and indexing inserts. These geometric choices help reduce vibration, support finer surface qualities in finishing passes and permit stable engagement in a wide range of milling applications. Ease of use, process security and application support Indexing the insert reduces downtime and preserves toolholder investment: multiple cutting edges are available before regrinding or replacement is required. The Tiger‑tec Gold series aims to provide predictable tool life and broad machinability. For supplementary technical data or material‑specific recommendations, Metav Werkzeuge offers application guidance and documented cutting data — contact via eMail: info@metav-werkzeuge.com or by phone: +49 2822 7131930 for tailored support. Choose Walter Tools Tiger‑tec Gold inserts from Metav Werkzeuge for proven process security—contact Metav Werkzeuge for material‑specific recommendations and reliable supply. Technical Data SKU: BCMT160516R-G55-WSP45G-WALTER Designation: BCMT160516R-G55 WSP45G Manufacturer: Walter Tools Dimensions / Core data Size: 16 Thickness: 05 Corner radius: 1.6 mm Clearance angle: 7° Plate form: Parallelogram 75° Tolerance class: M Chipbreaker: G55 Materials / Special features Series: Tiger‑tec Gold Grade: WSP45G (PVD-coated carbide) Material suitability: P / M / S Execution: T Application focus: milling FAQ What materials is this insert suitable for? The BCMT160516R-G55 WSP45G is suitable for material groups P, M and S — covering steel, stainless steels and heat‑resistant superalloys/titanium. What does the chipbreaker G55 provide? Chipbreaker G55 controls swarf form to reduce built-up edge and support consistent surface finish when using the BCMT160516R-G55 WSP45G insert. How does the Tiger‑tec Gold series benefit production? The Tiger‑tec Gold coating on this insert improves wear resistance and edge stability, which helps extend tool life and increase process reliability. What geometry advantages does the parallelogram 75° offer? The Parallelogram 75° form improves access for profiling and versatile milling strategies while maintaining secure cutting engagement and good surface quality. Is technical advice available for cutting data? Yes — Metav Werkzeuge can provide cutting recommendations and material‑specific guidance for the BCMT160516R-G55 WSP45G insert. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer.
BCMT160516R-G55W WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of a coated carbide grade optimised for difficult-to-cut alloys, combined with a stable G55W chipbreaker and precise cutting geometry for dependable production results; order the BCMT160516R-G55W WSM45X milling insert directly via Metav Werkzeuge or ask the consultants for application support. BCMT160516R-G55W WSM45X milling indexable insert — Walter Tools, for rostfreier Stahl and heat-resistant alloys The BCMT160516R-G55X WSM45X is a milling indexable insert engineered for demanding machining of rostfreier Stahl and heat‑resistant superalloys and titanium, offering a balance of edge stability and repeatable chip control WSM45X coated carbide grade for tough materials Parallelogram 75° shape for stable cutting 7° clearance angle and 1.6 mm nose radius G55W chipbreaker optimised for rostfreier Stahl Coated grade designed for demanding materials and stable chip formation The WSM45X grade is a coated carbide formulation designed specifically for machining the most demanding groups in ISO 513, notably rostfreier Stahl and heat‑resistant superalloys. Coating and substrate pairing improve resistance to adhesion and thermal loading, which results in more stable chip formation and reduced risk of built‑up edge during prolonged cuts. For production environments where consistent tool life and predictable behaviour under heat are priorities, this grade helps to maintain process stability and reduces unscheduled tool changes. Geometry that combines strength and surface quality The insert’s parallelogram 75° shape with a 7° clearance angle and 1.6 mm nose radius is a deliberate combination to support both robust cutting and acceptable surface finish. The larger nose radius increases edge strength and helps distribute cutting forces, which is advantageous for roughing and interrupted cuts; conversely, the geometry still permits medium finishing when the machine and cutter arrangement are set for finer passes. The G55W chipbreaker is tuned for the chip characteristics of rostfreier Stahl, promoting controllable chip evacuation and reduced heat concentration at the cutting edge. Practical benefits for workshops and production lines Choosing this insert delivers operational benefits: improved repeatability, fewer tool changes, and a clearer path to predictable cycle times on challenging materials. The insert suits standard toolholders accepting the BCMT form, simplifying stock management for toolrooms. With its coated carbide construction and the combination of chip control and edge strength, the insert supports higher productivity and better surface consistency in serial production. Where process reliability is essential, this geometry and grade combination contributes directly to lower scrap rates and steadier output. Contact Metav Werkzeuge to discuss how the Walter Tools BCMT160516R-G55W WSM45X insert fits specific rostfreier Stahl applications or to arrange a tailored procurement and tooling plan Technical Data SKU: BCMT160516R-G55W-WSM45X-WALTER Name: BCMT160516R-G55W WSM45X, milling indexable insert Manufacturer: Walter Tools Core technical data Size: 16 Nose radius: 1.6 Relief angle: 7° Shape: Parallelogram 75° Thickness: 05 Materials & features Grade: WSM45X (coated carbide) Chipbreaker: G55W Series: Walter Schneidstoffsorte - Serie offen Tolerance class: M Material suitability: S / M FAQ Which materials is this insert suitable for? The BCMT160516R-G55W WSM45X from Walter Tools is designed for rostfreier Stahl and heat‑resistant superalloys and titanium, addressing the thermal and adhesive challenges these groups present. What does the WSM45X designation mean? WSM45X identifies Walter Tools’ coated carbide grade optimised for tough‑to‑cut materials; the coating and substrate combination supports edge stability and controlled wear on rostfreier Stahl and similar alloys. Why is the 1.6 mm nose radius important? A 1.6 mm nose radius increases edge robustness and improves load distribution, which enhances tool life in heavy cuts and interrupted conditions while still allowing acceptable surface quality in finishing passes. What is the role of the G55W chipbreaker? The G55W chipbreaker is configured to produce short, controllable chips when machining rostfreier Stahl, improving evacuation and reducing heat concentration at the cutting zone for increased process reliability. Can this insert be used for both roughing and finishing? Yes; depending on cutter setup and cutting parameters, the insert’s geometry supports demanding roughing as well as medium finishing operations, offering versatility for mixed production tasks. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. The mentioned brand (Walter Tools) is used for explanatory purposes only. The offered article is original, factory‑new merchandise from the manufacturer.
BCMT160516R-G55W WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold PVD technology and robust geometry for reliable milling performance, combining versatile material compatibility and stable chip control to reduce downtime and increase throughput. Order directly via Metav Werkzeuge or request application advice from our team. BCMT160516R-G55W WSP45G milling insert — Tiger‑tec Gold, Walter Tools BCMT160516R-G55W WSP45G is an indexable milling insert designed for general and demanding milling applications where edge stability and consistent chip formation are required Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys 7° clearance angle, 1.6 mm corner radius Parallelogram 75° form for versatile milling Durable cutting performance for continuous production The combination of the Tiger·tec Gold coating and a tough coated carbide substrate delivers extended tool life and reliable edge retention. The insert’s coated grade WSP45G is a PVD-coated carbide developed for steel, stainless steel and superalloys (P / M / S), which helps to maintain cutting performance under elevated temperatures and challenging chip formation. This results in fewer indexings and longer intervals between tool changes, directly supporting higher machine availability and lower operating costs. The robust specification makes this insert particularly suitable for serial production and mixed‑batch operations. Predictable chip control across difficult materials Designed with an optimised chipbreaker and a grade tuned for ductile and heat‑resistant materials, the insert supports stable chip formation and reduced tendency for built‑up edge when machining stainless steel and titanium alloys. Conforming to ISO material groups P, M and S, the geometry and coating work together to reduce thermal load on the cutting edge and to preserve surface quality. The proven behaviour in these material classes helps to secure repeatable component tolerances and consistent surface finishes, which is vital for both aerospace and precision engineering workshops. Geometry that balances strength and finish The parallelogram 75° shape offers a defined cutting edge and positive engagement for many milling strategies while the 7° clearance reduces rubbing and improves cutting efficiency. With a 1.6 mm corner radius the insert provides a compromise between edge strength and the ability to achieve good surface finish on shoulder and slot milling. These geometric attributes support predictable tool life and make the insert a reliable choice when machining components that require both dimensional accuracy and a controlled surface appearance. Practical advantages for workshop and production settings As an indexable insert from Walter Tools, the design focuses on process reliability and straightforward tool management. The standard size designation (size 16, thickness code 05) and the M tolerance class facilitate compatibility with common tooling systems and inventory procedures. Choosing this insert can simplify tool logistics: fewer variants are needed to cover a range of materials, and the durable grade reduces overall tooling consumption. For operations seeking to increase throughput without sacrificing finish, this insert offers a blend of productivity and robustness. For specific application advice or to check suitability for a component, contact Metav Werkzeuge — our technical consultants provide detailed recommendations and process support via info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: BCMT160516R-G55W-WSP45G-WALTER Designation: BCMT160516R-G55W WSP45G Series: Tiger‑tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 1.6 mm Insert size: 16 Thickness designation: 05 Tolerance class: M Special features PVD coating technology: Tiger·tec Gold Material suitability: P / M / S (steel, stainless steel, superalloys/titanium) Shape: parallelogram 75° Application: versatile milling insert for demanding conditions FAQ What materials can this insert machine effectively? The BCMT160516R-G55W WSP45G insert is formulated for ISO groups P, M and S, meaning it is suitable for machining steel, stainless steel and heat‑resistant superalloys or titanium workpieces. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold PVD coating on this Walter Tools insert improves wear resistance and thermal stability, which helps to extend tool life and maintain consistent cutting performance in continuous milling operations. What does the 75° parallelogram shape mean in practice? A parallelogram 75° form provides a defined cutting edge geometry that is versatile for various milling strategies, offering a balance between engagement angle and accessibility for shoulder and peripheral milling tasks. Is the corner radius of 1.6 mm suitable for precision surfaces? Yes, the 1.6 mm corner radius gives enhanced edge strength while still allowing good surface quality; it is a compromise between robustness and the ability to achieve controlled surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names in this description is for identification and explanation only; there is no affiliation between Metav Werkzeuge and the referenced manufacturers.
BCMT160520L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating for improved edge stability, reliable G55 chip control and compatibility with Stahl and Gusseisen for consistent productivity. Order the milling insert directly via Metav Werkzeuge or ask our consultants if needed. BCMT160520L-G55 · BCMT160520L-G55 WKP35G — Milling indexable insert for Stahl and Gusseisen (Walter Tools) A BCMT160520L-G55 WKP35G milling insert engineered for productive machining of Stahl and Gusseisen with Tiger‑tec Gold coating. Tiger‑tec Gold coating for extended tool life Optimised G55 chipbreaker for reliable chips Parallelogram 75° form with 7° relief angle Suitable for Stahl and Gusseisen machining High productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WKP35G grade delivers measurable improvements in tool life and edge stability under the thermal and mechanical loads typical for machining Stahl. The coated carbide substrate reduces flank and crater wear, which leads to longer service intervals and fewer insert changes in series production. For production planners this means more predictable tool change cycles and improved component throughput without compromising surface quality. Precise chip control and geometry for steady performance The G55 chipbreaker is designed to produce controlled, short chips when cutting both Stahl and Gusseisen, reducing the risk of entanglement and improving process reliability. The parallelogram 75° insert form combined with a 7° relief angle and a 2 mm corner radius supports robust cutting edges that withstand interrupted cuts and heavy engagement. Explaining ISO groups: the insert is referenced to ISO material groups P (for Stahl) and K (for Gusseisen), which guides selection of cutting parameters for stable chip formation and consistent surface finish. Seamless integration into milling operations and clear handling benefits With the ISO designation and the standard BCMT geometry, the insert fits cutter bodies accepting BCMT‑type inserts and can be used across roughing and finishing operations depending on insert seat and size. The nominal plate size and thickness simplify tooling lists and inventory management. Because the grade and coating are optimised for the listed material groups, toolroom engineers can expect reliable edge life and repeatable results in mixed-production environments, while process engineers benefit from reduced downtime and easier parameter transfer between machines. Contact Metav Werkzeuge today for cutting data, application advice and to specify the Walter Tools BCMT160520L-G55 WKP35G for production use Technical Data SKU: BCMT160520L-G55-WKP35G-WALTER Label: Fräswendeschneidplatte BCMT160520L-G55 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Grade: WKP35G Facts Plate size: 16 Thickness: 05 Corner radius: 2 mm Relief angle: 7° Plate form: Parallelogramm 75° Chipbreaker: G55 Tolerance class: M Special features Coating: Tiger‑tec Gold Carbide grade: WKP35G (coated carbide) Material suitability: P / K (Stahl, Gusseisen) Execution: T ISO designation: BCMT160520L‑G55 WKP35G FAQ Which materials is this insert suitable for? The BCMT160520L‑G55 WKP35G is designed for machining Stahl and Gusseisen, corresponding to ISO groups P and K, utilising the Tiger‑tec Gold coating for improved wear resistance. What benefit does the G55 chipbreaker provide? The G55 chipbreaker ensures controlled, short chips in a wide range of cutting conditions, improving process security and reducing chip handling issues when using the insert. What are the key geometric details to consider? The insert features a parallelogram 75° form, a 7° relief angle and a 2 mm corner radius; these parameters affect engagement, corner strength and the achievable surface finish. Can the insert be used for both roughing and finishing? Depending on cutter body and cutting parameters, the grade and geometry allow the insert to be applied in heavy and moderate cuts; adjust feeds and speeds to match the desired removal rate and finish. How does Tiger‑tec Gold influence tool life? The Tiger‑tec Gold coating reduces abrasive and adhesive wear on the cutting edge, extending life and maintaining edge stability under the thermal loads typical for Stahl machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is original, factory‑new goods of the manufacturer.
BCMT160520L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold PVD coating, the versatile WSP45G grade and the stable parallelogram 75° form for reliable milling results; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. BCMT160520L-G55 WSP45G milling indexable insert — Tiger·tec Gold, chipbreaker G55 (Walter Tools) BCMT160520L-G55 WSP45G is a milling indexable insert engineered for demanding milling operations, optimised for use on steel, stainless steel and heat‑resistant alloys. Tiger·tec Gold PVD coating WSP45G grade for versatile milling Parallelogram 75° form for stability Corner radius 2 for robust edge Robust performance from a tough PVD grade The Tiger·tec Gold coating combined with the WSP45G grade delivers a PVD-based cutting concept designed for toughness and broad applicability. This grade is tuned to handle the thermal and mechanical stresses typical in machining steel, stainless steel and superalloys/titanium, supporting secure chip formation and reduced flank wear. The hard, wear-resistant coating improves edge life and process reliability, which in turn decreases downtime and contributes to a more efficient production flow. For short production cycles or mixed‑batch work, the resilient grade offers predictable performance across varying workpiece alloys. Geometry that stabilises cutting and improves surface quality The insert’s parallelogram 75° shape and chipbreaker G55 are conceived to enhance clamping stability and chip control during milling. The geometry reduces chatter susceptibility and supports a consistent cutting engagement, which results in improved surface finish and repeatable dimensions. The corner radius 2 and the defined 7° clearance angle help maintain a robust cutting edge under intermittent loads; this lowers the risk of edge chipping and extends tool life. Such features make the insert particularly suitable where process security and constant output quality are priorities. Practical compatibility and safe integration into production Designed as a versatile indexable insert, this grade and form factor fit standard milling toolholders that accept BCMT-style inserts. Material suitability is explicitly for Steel (P), Stainless steel (M) and Superalloys/Titanium (S), so the component is appropriate for workshops that require a single grade for diverse materials. The stable cutting edge and efficient chip control simplify tool management and reduce the need for frequent insert changes. For specific holder recommendations or cutting data, Metav Werkzeuge provides consultation to ensure the insert integrates correctly into the existing toolchain and achieves intended productivity gains. Contact Metav Werkzeuge for tailored cutting data and availability of Walter Tools Tiger·tec Gold inserts or request application advice from our consultants at Metav Werkzeuge Technical data Article number: BCMT160520L-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT160520L-G55 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Core dimensions Size: 16 Thickness code: 05 Corner radius: 2 Clearance angle: 7° Tolerance class: M Design & compatibility Grade: WSP45G Chipbreaker: G55 Form: Parallelogram 75° Material suitability: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Execution: T Plate designation: BCMT160520L-G55 FAQ Which materials can be machined with this insert? The BCMT160520L-G55 WSP45G insert by Walter Tools is suited for Steel (P), Stainless steel (M) and Superalloys/Titanium (S), delivering secure chip control and stable edges across these groups. How does the chipbreaker affect performance? The chipbreaker G55 supports consistent chip formation and evacuation, which improves surface quality and reduces heat concentration at the cutting edge for longer operational life. What is the benefit of the parallelogram 75° form? The parallelogram 75° geometry enhances clamping stability and reduces vibration during milling, contributing to repeatable dimensions and improved process security with this insert. Is the insert suitable for both roughing and finishing operations? The WSP45G grade is a tough, versatile PVD grade designed for a range of milling applications; it can be used where a reliable cutting edge and good chip control are required in both heavier and finer machining tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned here for clarification only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
BCMT160520R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating for extended tool life, optimised G55 chip control and a robust parallelogram geometry for reliable milling of steel and cast iron; order the insert directly via Metav Werkzeuge or ask our consultants for application support. BCMT160520R-G55 WKP35G indexable milling insert — Tiger‑tec Gold, suitable for steel and cast iron (Walter Tools) The BCMT160520R-G55 WKP35G is an indexable milling insert designed for precision face and profile milling of steels and cast iron, combining a high‑performance coated carbide grade with a stabilised chipformer. Tiger‑tec Gold coating for extended tool life Optimised G55 chipbreaker for reliable chips Suitable for steel and cast iron machining Consistent performance for steel and cast iron milling The coated carbide grade from the Tiger‑tec Gold family provides stable cutting edge life and predictable wear behaviour when machining steel and cast iron. The coating and substrate combination reduces flank wear and supports steady cutting conditions, which means fewer insert changes and higher machine uptime. For production environments requiring reproducible results, the insert’s geometry ensures consistent chip formation and surface finish, helping to keep cycle times short and rework rates low. Why the chipbreaker and geometry matter for productivity The G55 chipbreaker is engineered to control chips across typical milling feeds and depths in P and K materials, promoting short, manageable chips and reducing the risk of re-cutting. The parallelogram 75° shape and corner radius 2 mm combine to deliver a stable cutting line and good edge strength, particularly in interrupted cuts. These features translate into improved process security and allow for more aggressive feed choices without sacrificing reliability, supporting higher overall throughput. Economic benefits through longer tool life and fewer interruptions Thanks to the Tiger‑tec Gold coating and a robust substrate, the insert offers improved tool life, which reduces tooling costs per component in medium‑ to high‑volume runs. The tolerance class M and precise geometry support predictable indexing and setup repeatability, lowering downtime related to tool changes. For job shops and production lines seeking a balance between performance and cost efficiency, this insert delivers measurable improvements in productivity and consistency. Practical application guidance and compatibility The insert is specified for use in common milling toolholders that accept BCMT‑style inserts; the designation indicates profile and clamping compatibility for standard holders. Its coated carbide construction suits conventional cooling strategies and typical cutting speeds for steel and cast iron; where process stability is a priority, pairing the insert with a rigid holder and optimised coolant or through‑tool lubrication will yield best results. For special toolholder compatibility or cutting data, refer to technical charts or consult our application specialists. Order Walter Tools Tiger‑tec Gold inserts via Metav Werkzeuge for optimised milling performance — contact Metav Werkzeuge for tailored cutting data and application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BCMT160520R-G55-WKP35G-WALTER Designation: BCMT160520R-G55 WKP35G Series: Tiger‑tec Gold Grade / Sort: WKP35G Manufacturer: Walter Tools Product type: Indexable milling insert (milling insert) Facts Plate size: 16 Corner radius: 2 mm Free angle: 7° Plate thickness: 05 Shape: Parallelogram 75° Chipbreaker: G55 Tolerance class: M Special features Coating technology: Tiger‑tec Gold (coated carbide) Material groups: P (steel), K (cast iron) Execution: T Stable chip control and broad material coverage Optimised for productive machining and long edge life FAQ Which materials is this insert suitable for? The BCMT160520R-G55 WKP35G is suitable for machining steel and cast iron, aligned with the P and K material groups. What advantages does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on this insert improves wear resistance and cutting edge stability, which helps to extend tool life and maintain surface quality over long runs. How does the G55 chipbreaker influence performance? The G55 chipbreaker promotes short, controllable chips and consistent chip evacuation, enhancing process security and reducing downtime caused by poor chip control. What does the 75° parallelogram form affect in milling? The parallelogram 75° geometry offers a stable cutting engagement and favourable cutting forces for face and profile milling, supporting reliable surface finishes with good edge strength. Is the insert compatible with standard BCMT holders? Yes; the ISO designation indicates compatibility with holders designed for BCMT inserts, but verify holder clamping and seat geometry before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification and explanatory purposes only; there is no affiliation between our company and the trademark owners. The offered item is an original, brand‑new product from the manufacturer.
BCMT160520R-G55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the G55 chipbreaker for stable, productive machining of steel and cast iron; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. BCMT160520R-G55 WKP35S milling insert — 75° parallelogram geometry, Tiger·tec Silver (Walter Tools) The BCMT160520R-G55 WKP35S is a 75° parallelogram milling insert designed for productive roughing and medium finishing in steel and cast iron applications. Tiger·tec Silver coating for improved tool life G55 chipbreaker for controlled chip formation Parallelogram 75° geometry for stable cutting Suitable for steel and cast iron Reliable cutting performance that reduces process variation The use of the Tiger·tec Silver coating together with the WKP35S grade provides a robust foundation for consistent metal removal. This combination is engineered to resist abrasive wear and maintain a stable cutting edge during longer production runs, which reduces unexpected tool changes and process variation. The G55 chipbreaker simplifies chip control in interrupted cuts typical for cast components, while the positive rake inherent to the parallelogram 75° geometry helps to stabilise cutting forces. These technical characteristics translate directly into fewer machine stoppages and improved cycle-time predictability. Improved surface quality and longer tool life for economic gains A coated carbide construction and a defined tolerance class M contribute to repeatable positioning and consistent contact conditions in the toolholder. The controlled edge stability supports a better surface finish on machined parts with fewer rework steps, especially when processing unalloyed and alloyed steels (P) as well as cast irons (K). The modest 2 mm corner radius and the plate thickness ensure an advantageous balance between edge strength and cutting precision, yielding longer tool life and lower overall tooling costs across batches. Clear material scope and practical machining guidance The insert is specified for the ISO 513 groups P (steel) and K (cast iron), meaning the grade and geometry are optimised for the thermal and fracture characteristics specific to these materials. The plate form — parallelogram 75° — permits stable seating and repeatable indexing in compatible milling cutters, while the G55 chipbreaker assists with short, segmented chips typical of cast-iron machining. For best results, pair the insert with a rigid clamping system and adjust feeds to the workpiece hardness and cutter diameter; these steps ensure the combination of grade and geometry delivers predictable productivity gains. Practical advantages in production planning and tool management The insert’s combination of proven coating technology and a dedicated chipformer supports process reliability and easier tool management. With standardised dimensions and a defined tolerance class, inventory handling and exchange procedures become more straightforward, allowing faster changeovers on the shop floor. This predictability not only improves throughput but also simplifies quality control routines, enabling planners to rely on repeatable cutting performance when scheduling series production. Contact Metav Werkzeuge today for application-specific recommendations and to secure the BCMT160520R-G55 WKP35S insert from Walter Tools for dependable machining results Technical data Article number: BCMT160520R-G55-WKP35S-WALTER Product: Fräswendeschneidplatte / milling insert Brand: Walter Tools Grade: WKP35S Series: Tiger-tec Silver Facts Free angle: 7° Corner radius: 2 mm Plate form: Parallelogram 75° Plate size: 16 Plate thickness: 05 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: G55 Material suitability: P (steel), K (cast iron) Material of insert: coated carbide FAQ Which materials is this insert suitable for? The BCMT160520R-G55 WKP35S insert from Walter Tools is specified for ISO groups P (steel) and K (cast iron), making it appropriate for a wide range of unalloyed and alloyed steels as well as cast components. What does the G55 chipbreaker do? The G55 chipbreaker on this insert improves chip control and fragmentation, particularly useful in interrupted cuts and when machining cast iron, which helps maintain stable cutting conditions. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating enhances wear resistance and thermal stability of the insert, which supports longer tool life and consistent cutting geometry under demanding shop-floor conditions. What are the geometric highlights to consider when selecting a toolholder? The parallelogram 75° plate form and the defined tolerance class M require a compatible cutter body that secures the insert reliably and preserves the intended cutting angle for repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and imply no affiliation with our company. The offered article is original, brand-new goods supplied by the manufacturer.
BCMT160520R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of targeted material coverage and edge stability: the WSM45X carbide grade and 2 mm corner radius deliver reliable machining of stainless steels and heat‑resistant superalloys, while the G55 chipbreaker improves chip control and surface finish. Order the insert via Metav Werkzeuge or contact the consultants for application support. BCMT160520R-G55 WSM45X milling indexable insert — Parallelogram 75°, WSM45X grade — Walter Tools The BCMT160520R-G55 WSM45X is a milling indexable insert engineered for demanding operations in stainless steels and heat‑resistant superalloys, offering a robust geometry and a coated‑carbide grade for secure cutting performance. Parallelogram 75° insert geometry 7° clearance angle for stable cutting 2 mm corner radius for increased edge life WSM45X grade for stainless and superalloys High‑efficiency performance for difficult‑to‑machine materials The combination of a coated carbide grade and a purpose‑built chipbreaker (G55) enables consistent material removal rates in challenging alloys. The WSM45X grade is optimised for applications classified as M and S under ISO 513, meaning it supports secure chip formation in stainless steels and offers thermal and edge stability for superalloys and titanium. This balance of wear resistance and toughness reduces the risk of built‑up edge and promotes long tool life, which translates into fewer index changes and steadier cycle times on production runs. Geometry and edge design that protect the cutting edge The parallelogram 75° shape in combination with a 7° clearance angle delivers a secure engagement and favourable cutting force orientation for face and shoulder milling. A 2 mm corner radius increases the effective edge strength, helping to resist chipping during interrupted cuts. These geometric choices improve process reliability, especially where heat generation and workpiece tensile strength can otherwise compromise the cutting edge. The insert’s coated carbide construction further supports surface quality by preserving the cutting edge under thermal stress. Better chip control and surface quality for productive machining Reliable chip evacuation is essential when machining sticky or heat‑generating materials. The G55 chipbreaker is designed to produce predictable chip forms and reduce re‑cutting, which contributes directly to a better surface finish and reduced cycle time. Stable chip control also lowers the incidence of machine stoppages from tangled chips and helps maintain coolant effectiveness. The practical result is a more productive process with consistent component quality and fewer secondary operations. Process support and application guidance for industrial use Selection of the correct insert geometry and grade is key to process security. The insert’s WSM45X coating and composition suit high‑temperature stability and wear resistance required in serial production environments. For customers requiring guidance on cutting data, clamping or insert selection for specific stainless grades or superalloys, Metav Werkzeuge offers technical consultation and can assist in trial setups to confirm the best parameters for a given machining centre or cutter body. Recommendations focus on cutting speed, feed, depth of cut and coolant strategy to exploit the insert’s advantages while safeguarding tool life. Contact Metav Werkzeuge for tailored application advice on Walter Tools WSM45X inserts and to arrange cutting trials or selection support. Technical data Article number: BCMT160520R-G55-WSM45X-WALTER Description: Fräswendeschneidplatte / milling indexable insert BCMT160520R-G55 WSM45X Manufacturer: Walter Tools Grade: WSM45X Chipbreaker: G55 Facts Insert size: 16 Thickness: 05 Clearance angle: 7° Corner radius: 2 Shape: Parallelogram 75° Tolerance class: M Execution: T Special features Coated carbide cutting material Suitable for material groups M (stainless steels) and S (superalloys, titanium) Series: Walter Schneidstoffsorte - Serie offen Optimised for secure chip formation and edge stability Intended for milling applications FAQ What materials is this insert suitable for? This insert is intended for stainless steels (M) and heat‑resistant superalloys/titanium (S) as denoted by the WSM45X grade and the material suitability specified for the cutting grade. How does the G55 chipbreaker help in production? The G55 chipbreaker promotes controlled chip formation, reduces re‑cutting and improves surface finish, which leads to fewer stoppages and more consistent part quality when machining tough alloys. Which cutter geometries benefit most from the parallelogram 75° shape? Parallelogram 75° geometry is advantageous in face and shoulder milling where secure engagement and a favourable force direction improve stability and reduce the risk of edge failure. Can the insert be used for interrupted cuts? Yes; the 2 mm corner radius and the coated carbide composition enhance edge robustness, making the insert suitable for many interrupted cutting conditions in demanding materials. Where to get technical support or recommendations for cutting data? Metav Werkzeuge can provide application advice and cutting data recommendations for the Walter Tools WSM45X inserts based on machine, toolholder and workpiece specifics. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer, Walter Tools.
BCMT160520R-G55 WSP45G Walter Tools Wendeplatten - Walter Tools
Take advantage of the economical performance of a PVD-coated grade combined with optimised chip control and a robust geometry to keep milling operations productive and reliable. The combination of Tiger·tec Gold coating, the G55 chipbreaker and a secure parallelogram seating reduces tool changes and improves process stability — order the BCMT160520R-G55 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. BCMT160520R-G55 WSP45G indexable milling insert — Tiger·tec Gold, chipbreaker G55 (Walter Tools) The BCMT160520R-G55 WSP45G is an indexable milling insert engineered for versatile face and shoulder milling of Stahl, rostfreier Stahl and high-temperature alloys in demanding industrial applications. Tiger·tec Gold PVD coating for enhanced tool life Optimised G55 chipbreaker for stable chips Parallelogram 75° shape for secure clamping 7° clearance with 2 mm corner radius High-performance coating for longer tool life and consistent cuts The insert’s Tiger·tec Gold PVD technology provides a balanced combination of wear resistance and edge toughness that extends runtimes under interrupted and continuous milling. This coated carbide grade supports improved thermal protection and reduced flank wear, which translates into fewer tool changes and higher machine utilisation. The G55 chipbreaker is designed to promote reliable chip formation and evacuation, improving cycle-time consistency and lowering the risk of built-up edge when machining Stahl or tougher alloys. Broad material capability explained for confident process planning Designed for ISO material groups P, M and S, the insert suits a wide range of components: P (Stahl and alloyed steels) where heat and chip control are critical; M (rostfreier Stahl) where toughness and adhesion must be managed; and S (heat‑resistant superalloys and Titanium) where thermal load and edge stability dominate. By matching coating and substrate to these groups, the insert reduces the need for multiple tool variants and simplifies tooling strategies, enabling predictable performance across mixed batches and complex production runs. Geometry tuned for stability, clamping security and surface finish The parallelogram 75° form provides a compact seating with consistent engagement and improved radial support in standard holders, while the 7° clearance reduces rubbing and promotes cleaner shearing. The 2 mm corner radius strengthens the cutting edge against chipping and helps produce a stable surface finish on interrupted cuts. These geometric choices help maintain dimensional consistency and surface quality during higher feed rates, supporting tighter tolerances and fewer rework cycles on machined parts. Industrial integration and economic benefits in daily operation Marked to tolerance class M and supplied in the Tiger·tec Gold series, the insert fits common BCMT holders and is suitable for a variety of milling operations. The solid carbide substrate and PVD top layer combine to deliver repeatable edge life and predictable regrinding intervals where applicable, which contributes to lower overall tooling costs. For production environments that prioritise uptime and consistent part quality, this insert offers a pragmatic balance between durability and process security, supporting efficient shopfloor planning. Speak to Metav Werkzeuge for tailored advice on toolholder compatibility and application optimisation for Walter Tools inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BCMT160520R-G55-WSP45G-WALTER Designation: BCMT160520R-G55 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade/sort: WSP45G Execution/code: T Facts Insert size: 16 Corner radius: 2 mm Clearance angle: 7° Shape: Parallelogram 75° Thickness code: 05 Tolerance class: M Special features Coating: WSP45G (PVD coated carbide) Chipbreaker: G55 Material suitability: P / M / S (Stahl, rostfreier Stahl, superalloys / Titanium) Robust cutting edge for interrupted cuts Indexable insert type: BCMT format FAQ What materials can this insert machine effectively? The BCMT160520R-G55 WSP45G from Walter Tools is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys and Titanium, as indicated by its P / M / S designation. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold PVD coating on this Walter Tools insert enhances wear resistance and thermal protection, which helps to extend tool life and maintain cutting-edge stability in demanding milling tasks. Is the G55 chipbreaker suitable for general-purpose milling? Yes, the G55 chipbreaker is optimised for controlled chip formation and evacuation, making it well suited for a range of face and shoulder milling operations with varying cut depths. What does the parallelogram 75° shape mean for clamping and stability? The parallelogram 75° geometry offers a secure seating and consistent engagement in compatible toolholders, improving radial support and reducing the risk of insert movement under load. Are there any recommendations for feeding and speeds with this insert? Feeding and cutting speed choices depend on the specific workpiece material and machine setup; the BCMT160520R-G55 WSP45G excels where a balance of edge toughness and wear resistance is required, but final parameters should be validated by trial cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading producers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
BCMT160525R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coated grade and the robust Parallelogram 75° geometry to increase milling productivity while maintaining reliable chip control; order directly via Metav Werkzeuge or contact the consultants for tailored application advice. BCMT160525R-G55 WKP35G milling insert — Tiger·tec Gold, for steel & cast iron — Walter Tools BCMT160525R-G55 WKP35G is a compact milling insert designed for versatile roughing and semi-finishing of steels and cast iron, combining a wear-resistant coated grade with a robust parallelogram geometry for process-stable cutting. Milling insert BCMT160525R-G55 WKP35G Walter Tiger·tec Gold coated WKP35G grade Parallelogram 75° geometry for stable cuts G55 chipbreaker for controlled chip formation Increased throughput with a wear‑resistant coated grade The combination of the WKP35G cutting grade and Tiger·tec Gold coating focuses on extended tool life and consistent performance when machining steels (P) and cast iron (K). The coated carbide substrate is engineered to tolerate the typical heat and abrasive wear encountered in these materials, which translates into fewer tool changes and higher machine uptime. As a result, cycle times improve and process reliability becomes more predictable, supporting throughput targets in production environments where repeatability matters. Geometry engineered for edge security and predictable chips The Parallelogram 75° shape and the G55 chipbreaker deliver process stability through secure edge support and optimised chip control. The insert’s corner radius 2.5 mm increases edge robustness, which reduces the risk of premature breakouts under interrupted cuts or heavier engagement. A 7° relief angle helps maintain cutting forces within expected ranges while ensuring favourable tool–workpiece interaction. Together, these geometry choices benefit both component quality and overall machining economy. Improved surface quality with consistent wear behaviour Thanks to the coated carbide grade and the Tiger·tec Gold technology, the insert provides stable flank wear progression and predictable cutting-edge behaviour. This supports a steady surface finish over longer tool lives and reduces scatter in part quality between tool changes. The chip control characteristics of the G55 breaker also contribute to repeatable swarf evacuation, lowering the likelihood of rework and improving downstream handling. Easy integration and versatile application in milling toolchains The insert’s size 16 format and the low-profile 05 thickness make it suitable for a wide range of standard milling holders, while the execution marked as T and the tolerance class M ensure interchangeability and consistent seating. The grade’s specification for steel and cast iron allows flexible use across typical shop-floor workpieces without the need for multiple specialised grades. This versatility simplifies tool inventory and aids process engineers in standardising machining strategies. For high‑productivity milling with the Tiger·tec Gold WKP35G grade, contact Metav Werkzeuge for availability and application support. Technical data SKU: BCMT160525R-G55-WKP35G-WALTER ISO designation: BCMT160525R-G55 WKP35G Product type: Milling insert / indexable insert Series: Tiger·tec Gold Grade: WKP35G Manufacturer: Walter Tools Core numerical data Insert size: 16 Corner radius: 2.5 mm Relief angle: 7° Thickness: 05 Form angle: 75° Tolerance class: M Designs and special features Coated carbide cutting material (Tiger·tec Gold technology) Chipbreaker type G55 Parallelogram 75° plate form Execution: T Material application: Steel (P) and Cast iron (K) FAQ Is this insert suitable for stainless steel? The WKP35G grade and the Tiger·tec Gold coating are specified for steel and cast iron; stainless steel is not listed among the primary material groups for this insert. What are the key benefits of the G55 chipbreaker? The G55 chipbreaker promotes controlled chip formation and reliable swarf evacuation when machining steels and cast iron, contributing to consistent surface quality and fewer interruptions in production. Can the BCMT160525R-G55 WKP35G be used for finishing passes? The insert is designed for productive cutting and offers geometries that can be employed in semi-finishing; final finishing capability depends on specific machine parameters, cutting data and holder rigidity. How does the corner radius affect performance? A 2.5 mm corner radius increases edge strength and resistance to chipping, which supports heavier feeds and interrupted cuts while maintaining a predictable wear pattern. What information is included in the ISO designation? The ISO designation (BCMT160525R-G55 WKP35G) describes the insert geometry, chipbreaker and grade used; it helps ensure the correct insert is matched to the intended milling application. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160525R-G55 WKP35S Wendeplatten - Walter Tools
The combination of the Tiger·tec Silver coating and the WKP35S grade delivers consistent tool life and chip control for demanding milling tasks; paired with the G55 chipbreaker and a 7° clearance, this insert ensures stable machining of steel and cast iron. Order the BCMT160525R-G55 WKP35S directly via Metav Werkzeuge or consult our specialists for application-specific data. BCMT160525R-G55 WKP35S milling indexable insert, Tiger·tec Silver, for steel and cast iron — Walter Tools BCMT160525R-G55 WKP35S is a parallelogram 75° milling insert intended for productive roughing and medium finishing operations on steel and cast iron Tiger·tec Silver coating for extended life WKP35S grade for steel and cast iron G55 chipbreaker for consistent chip control Parallelogram 75° form with 7° clearance Delivering reliable performance in steel and cast iron machining The BCMT160525R-G55 WKP35S combines the Tiger·tec Silver coating with the WKP35S carbide grade to address the thermal and abrasive demands of machining steel and cast iron. The coating system reduces flank and crater wear, which translates into longer indexable life and fewer tool changes — a direct benefit for production environments seeking higher uptime. The insert’s geometry and grade are optimised for common ISO groups P and K, ensuring stable cutting behaviour across a wide range of workpiece alloys and heat-treatment conditions. Controlled chip flow and consistent surface quality Equipped with the G55 chipbreaker and a Parallelogram 75° profile, this insert promotes predictable chip formation and evacuation during interrupted and continuous cuts. The moderate 2.5 mm corner radius supports robust engagement and improves surface integrity without compromising edge strength. A 7° clearance angle reduces rubbing at the flank face, lowering cutting forces and helping to maintain consistent surface finish over prolonged tool life. These features together reduce the likelihood of built-up edge and improve repeatability on serial production runs. Practical benefits for workshop efficiency The plate’s toleration class M and the standard size 16 make it straightforward to integrate into existing toolholders and machine setups, simplifying logistics and inventory management. The balanced combination of geometry and grade enables higher material removal rates while maintaining dimensional accuracy, which can shorten cycle times and reduce secondary operations. The indexable design allows for quick insert indexing, minimising spindle downtime and making maintenance predictable and efficient. Application guidance and process transparency For best results, pair this insert with matching Walter Tools toolholders designed for parallelogram inserts and select cutting data adapted to the workpiece material and rigidity of the setup. The WKP35S grade is engineered to tolerate the heat and chip behaviour typical of steels and cast irons; when combined with the Tiger·tec Silver coating, it offers an attractive balance between wear resistance and fracture toughness. If specific feed, speed or depth-of-cut recommendations are required for a particular alloy or machining operation, process data can be supplied on request. For detailed cutting parameters, availability and application support, contact Metav Werkzeuge — Metav Werkzeuge’s consultants can provide tailored feed and speed charts and ensure the BCMT160525R-G55 WKP35S is matched to the intended machining task; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data Article number: BCMT160525R-G55-WKP35S-WALTER Product type: milling indexable insert Brand: Walter Tools Designation: BCMT160525R-G55 WKP35S Series: Tiger·tec Silver Facts Free angle: 7° Corner radius: 2.5 mm Plate size: 16 Thickness code: 05 Form: Parallelogram 75° Tolerance class: M Special features Grade: WKP35S Chipbreaker: G55 Coating technology: Tiger·tec Silver Applicable workpiece groups: P (steel), K (cast iron) Execution: T FAQ What materials is this insert suitable for? The BCMT160525R-G55 WKP35S is designed primarily for steel and cast iron, matching ISO groups P and K with the WKP35S grade and Tiger·tec Silver coating. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes reliable chip control and evacuation, reducing the risk of entanglement and improving consistency in both interrupted and continuous milling operations. What does the 7° clearance provide? A 7° clearance angle reduces friction at the flank face, lowering cutting forces and helping to maintain surface finish and tool life during prolonged cuts. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original factory-new product of the manufacturer (Walter Tools).
BCMT160525R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold PVD‑coated grade and the WSP45G geometry for stable edge life and predictable chip control in machining Stahl, rostfreier Stahl and heat‑resistant alloys; secure consistent productivity and quality by ordering through Metav Werkzeuge or consulting our technical advisors. BCMT160525R-G55 WSP45G Fräswendeschneidplatte — Tiger‑tec Gold, versatile P/M/S application, Walter Tools A high‑performance milling indexable insert, the BCMT160525R-G55 WSP45G is designed for versatile milling of Stahl, rostfreier Stahl and heat‑resistant superalloys, offering reliable edge stability and controlled chip formation. Tiger‑tec Gold PVD‑coated carbide grade WSP45G Optimised chip control with G55 chipbreaker Parallelogram 75° geometry for flexible milling strategies 2.5 mm corner radius with 7° relief angle Reliable performance across demanding materials The Tiger‑tec Gold technology in this insert combines a modern PVD coating with a tough carbide substrate to balance wear resistance and edge stability. The WSP45G grade is formulated for Zerspanung where both plastic deformation and thermal load are critical, making it especially suitable for Stahl, rostfreier Stahl and superalloys and Titan. Coated carbide inserts deliver longer tool life and reduced flank wear under mixed cutting conditions; this leads to fewer tool changes and a more predictable machining cycle. The PVD layer supports a stable cutting edge at moderate temperatures and improves resistance to abrasive and adhesive wear mechanisms. Stable chip control and improved surface finish The G55 chipbreaker is engineered for effective chip segmentation during face and peripheral milling, reducing the risk of recutting and promoting consistent chip evacuation. Combined with the parallelogram 75° insert form, the geometry provides favourable entry and exit angles for diverse milling strategies, which helps maintain surface integrity and dimensional consistency. In practice, this translates to fewer secondary operations and improved first‑pass part quality, particularly when machining materials that tend to produce tough or stringy chips. Enhanced process security and repeatability A 2.5 mm corner radius and 7° relief angle deliver a robust cutting edge capable of handling interrupted cuts and variable engagement depths without premature edge chipping. The insert’s tolerance class M ensures repeatable seat fit and concentricity in compatible toolholders, contributing to predictable vibration behaviour and consistent workpiece tolerances. These mechanical attributes support higher material removal rates under stable conditions, which in turn promotes economic machining through longer indexable lifetimes and reduced scrap rates. Integration into production and recommended applications With a nominal size of 16 and a plate thickness of 05, this insert suits a wide range of milling cutters designed for indexable inserts; the T execution is compatible with standard clamping systems that accept parallelogram‑form inserts. The grade’s designation highlights its broad applicability in P/M/S work: P for unalloyed and alloyed Stahl, M for rostfreier Stahl, and S for heat‑resistant superalloys and Titan. For new setups or critical components, consult machining data sheets and perform trial cuts to adapt feeds and depths to the specific machine dynamics. The result is safer process windows, fewer unplanned stoppages and a steady production rhythm. For tailored machining advice on Walter Tools Tiger‑tec Gold inserts such as the BCMT160525R‑G55 WSP45G, contact Metav Werkzeuge for application support and parts availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: BCMT160525R-G55-WSP45G-WALTER Name: Fräswendeschneidplatte BCMT160525R-G55 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Relief angle: 7° Corner radius: 2.5 mm Shape: Parallelogram 75° Size: 16 Thickness: 05 Tolerance class: M Special features Grade: WSP45G (PVD‑coated carbide) Chipbreaker: G55 Material capability: P / M / S Execution: T FAQ What materials is this insert suitable for? The BCMT160525R‑G55 WSP45G from Walter Tools is designed for machining Stahl, rostfreier Stahl and heat‑resistant superalloys (S), providing stable cutting behaviour across these groups. What benefit does the WSP45G grade deliver? WSP45G is a PVD‑coated carbide grade within the Tiger‑tec Gold family that offers a balance of toughness and wear resistance, improving edge life and consistency in milling applications. How does the G55 chipbreaker influence machining? The G55 chipbreaker facilitates controlled chip formation and evacuation, reducing the chance of chip entanglement and helping to achieve improved surface quality during milling. Which insert geometry suits interrupted cuts and medium depths of cut? The parallelogram 75° shape combined with a 2.5 mm corner radius and 7° relief angle gives the insert mechanical strength and resilience, making it well suited to interrupted cuts and medium engagement milling. Are there standard recommendations for toolholder compatibility? The insert’s parallelogram form and execution T are intended for toolholders that accept BCMT‑style parallelogram inserts; ensure seat match and correct clamping to maintain tolerance class M performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes; there is no affiliation between our company and the mentioned manufacturers. The offered item is original, new product from the manufacturer.
BCMT160530L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for economical, high-performance milling of steel and cast iron; the chipbreaker G55 and parallelogram 75° form ensure reliable chip control and stable engagement in demanding production environments. Order the BCMT160530L-G55 WKP35G directly via Metav Werkzeuge or ask our consultants if needed. BCMT160530L-G55 WKP35G indexable milling insert — Tiger·tec Gold, for Steel and Cast iron | Walter Tools BCMT160530L-G55 WKP35G is an indexable milling insert optimised for productive machining of steel and cast iron, combining modern coating technology with a robust chipformer geometry Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron Parallelogram 75° form for robust engagement Chipbreaker G55 for consistent chip control Deliver predictable performance with Tiger·tec Gold coating The Tiger·tec Gold coating offers a balanced combination of wear resistance and thermal stability, designed to extend tool life under typical steel and cast iron cutting conditions. Paired with the WKP35G grade, the insert sustains cutting edges longer and reduces the frequency of index changes, which translates into lower cycle interruptions and higher machine uptime. This section explains why the coating matters: it reduces abrasive wear and protects the substrate at elevated temperatures, providing consistent machining quality and measurable process reliability. Stable cutting and improved chip evacuation for safer cycles The engineered chipbreaker G55 and parallelogram 75° insert form promote controlled chip formation and secure engagement, reducing the risk of built-up edge and erratic chip behaviour. The corner radius 3 and the insert geometry create predictable load distribution, improving surface finish while avoiding excessive forces on the toolholder. In practical terms, this leads to fewer secondary operations and steadier feed rates — a direct contribution to process efficiency and repeatable component tolerances. Versatility across steel and cast iron applications Designed for the ISO material groups P and K, this insert supports a broad range of steels and cast irons encountered in general machining and heavy-duty operations. The material compatibility and the WKP35G grade make the insert a reliable choice for mixed production runs where one needs a single solution for varying workpiece alloys. For teams aiming to reduce tool inventory without compromising performance, this insert offers a pragmatic balance between flexibility and specialised performance. Technical fit and shop-floor integration for reliable handling The insert’s form and tolerance class M ensure secure seating and interchangeability in standard toolholders compatible with the BCMT geometry. The designation and codes follow common industry conventions, facilitating procurement and tool management in commercial production environments. Information such as clearance angle 7°, insert size 16 and thickness code 05 help confirm compatibility with existing holders; confirm holder match by referencing the toolholder manufacturer’s specifications before first use. Contact Metav Werkzeuge today for tailored milling recommendations and to secure BCMT160530L-G55 WKP35G inserts for steel and cast iron machining — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BCMT160530L-G55-WKP35G-WALTER SKU: BCMT160530L-G55-WKP35G-WALTER Label: Fräswendeschneidplatte BCMT160530L-G55 WKP35G Walter Tools Manufacturer: Walter Tools Numbers / core data Clearance angle: 7° Insert size: 16 Corner radius: 3 Thickness code: 05 Tolerance class: M Designs / special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: G55 Plate form: Parallelogram 75° Applicable materials: Steel (P), Cast iron (K) Execution: T FAQ What materials can be machined with this insert? The BCMT160530L-G55 WKP35G is suitable for ISO groups P and K, meaning it is intended for machining steel and cast iron with effective chip control provided by the G55 chipbreaker. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this Walter Tools insert increases wear resistance and thermal stability, which helps maintain cutting performance and reduces the need for frequent index changes. What does the chipbreaker G55 do? The G55 chipbreaker is engineered to form and evacuate chips reliably during milling, improving process stability and contributing to a consistent surface finish in both steel and cast iron. Which insert geometry should be matched in the toolholder? Match the toolholder to the BCMT form, parallelogram 75° seating and clearance angle 7° to ensure proper clamping and repeatable performance with this Walter Tools insert. What does the tolerance class M indicate? Tolerance class M denotes the manufacturing precision of the insert; it ensures consistent fit and predictable engagement in holders designed for BCMT-type inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners and are used here for clarification only. The offered item is original, brand-new goods from the manufacturer.
BCMT160530L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a high-performance PVD grade and universal material compatibility to maintain steady productivity and predictable tool life; order the insert directly via Metav Werkzeuge or consult our team for application advice. BCMT160530L-G55 WSP45G Parallelogram 75° milling insert by Walter Tools — Tiger·tec Gold, 7° clearance The BCMT160530L-G55 WSP45G is a parallelogram milling insert designed for versatile milling tasks, combining a Tiger·tec Gold PVD grade with a G55 chipbreaker for stable chip control. Tiger·tec Gold PVD coating Suitable for P / M / S material groups Parallelogram 75° insert geometry 7° clearance with 3 mm corner radius Consistent cutting performance for mixed materials The combination of the Tiger·tec Gold PVD technology and the WSP45G grade delivers a reliable balance between wear resistance and toughness, making the insert especially effective for mixed production. As a milling insert, it is engineered to handle the thermal and mechanical demands typical of machining steel and related alloys, helping to reduce unplanned tool changes and supporting a smoother production flow. The robust coating improves resistance to abrasive wear while maintaining edge integrity under variable cutting conditions. Stable edge life and improved surface finish The G55 chipbreaker and a 3 mm corner radius promote consistent chip formation and protect the cutting edge during interrupted cuts. The 7° clearance angle reduces rubbing and heat build-up at the flank, which contributes to longer service intervals and more predictable component finish. For applications that prioritise repeatability and dimensional stability, this indexable plate supports reliable surface quality and reduced rework rates. Wide applicability with clear handling advantages Designed for the ISO groups P / M / S, the insert covers unalloyed and alloyed steel, stainless steel, and heat-resistant superalloys or titanium, making it a universal choice for mixed-machine shops. The parallelogram 75° shape offers a favourable lead angle for stable axial engagement and better face clearance in shoulder milling, while the standardised geometry ensures compatibility with common toolholders. Technical selection becomes straightforward: choose the grade and chipbreaker to match the workpiece family for efficient machining. For high-reliability milling with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge to discuss suitability for specific components or to arrange supply and technical consultation. Technical Data Article number / SKU: BCMT160530L-G55-WSP45G-WALTER Product label: Fräswendeschneidplatte BCMT160530L-G55 WSP45G Walter Tools Manufacturer: Walter Tools Series / Grade: Tiger-tec Gold Grade / Sort: WSP45G Chipbreaker: G55 Designation (short): BCMT160530L-G55 ISO designation: BCMT160530L-G55 WSP45G Execution: T Tolerance class: M Material category: P / M / S Enrichment: Serie: Tiger-tec Gold — Sorte: WSP45G — beschichtetes Hartmetall Facts Clearance angle: 7° Corner radius: 3 Plate size: 16 Plate thickness: 05 Special features Parallelogram 75° insert form PVD-coated Tiger·tec Gold technology Suitable for steel, stainless steel, superalloys and titanium G55 chipbreaker for controlled chips Tolerance class M Designed for milling applications Walter Tools original product FAQ What materials can be machined with this insert? The BCMT160530L-G55 WSP45G is specified for the ISO groups P / M / S, meaning it is suitable for steel, stainless steel and heat‑resistant superalloys or titanium. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold PVD enhances wear resistance while preserving toughness under intermittent cutting, so the insert from Walter Tools maintains cutting edge stability and extends service life in mixed machining. Which chipbreaker is fitted and what is its purpose? The insert features the G55 chipbreaker, engineered to promote predictable chip formation and reduce the risk of built-up edge during heavy or interrupted milling cycles. Is the insert compatible with standard toolholders? Yes, the parallelogram 75° geometry and ISO designation BCMT160530L-G55 ensure compatibility with common milling toolholders designed for this insert shape. What does the tolerance class M imply for production? Tolerance class M denotes a standard precision level suitable for general machining tasks where reproducible indexing and consistent seat fit are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Brand names and trademarks are the property of their respective owners. They are mentioned for explanatory purposes only. There is no association between our company and the named brands. The offered article is original factory-new goods of the manufacturer Walter Tools.
BCMT160530R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for reliably productive machining of steel and cast iron; the parallelogram 75° geometry with a 3 mm corner radius and 7° clearance ensures stable chip control and long tool life. Order the BCMT160530R-G55 WKP35G directly via Metav Werkzeuge or consult the technical team for application advice. BCMT160530R-G55 WKP35G milling indexable insert, Tiger·tec Gold — for steel and cast iron, 3 mm radius, 7° clearance — Walter Tools The BCMT160530R-G55 WKP35G is a parallelogram 75° milling insert engineered for productive face and profile milling of steel and cast iron, combining a coated carbide grade with a geometry optimised for stable chip formation. Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron Parallelogram 75° geometry for versatile milling 3 mm corner radius with 7° clearance Higher productivity through optimised coating and grade The Tiger·tec Gold technology in this insert delivers improved wear resistance and consistent performance under the thermal and mechanical loads typical of machining steel and cast iron. The WKP35G grade is a coated carbide formulation designed to maintain a stable cutting edge and reduced flank wear; this translates into longer tool life and fewer indexings, which increases machine uptime and lowers unit machining cost. The coating also contributes to predictable performance across interrupted cuts and varying feed rates. Geometry and cutting reliability for demanding milling tasks The 75° parallelogram geometry together with a 3 mm corner radius and a 7° clearance angle provides a balance between robust cutting edge strength and accessible cutting engagement. This shape supports versatile strategies such as shoulder milling and light roughing with reduced risk of chipping. The integrated G55 chipbreaker promotes controlled chip formation in a range of feed conditions, improving surface finish consistency and facilitating efficient chip evacuation during continuous production runs. Application range and practical advantages in production Assigned to ISO groups P and K, this insert is suitable for unalloyed and alloyed steel as well as for cast iron, making it a flexible choice for mixed production environments. The coated carbide substrate and the specified tolerance class M ensure repeatable performance and easy replacement in industry-standard toolholders. For planners and process engineers, the combination of grade, coating and geometry enables economical tool programmes where tool change frequency and process stability are priorities. Contact Metav Werkzeuge for application recommendations or to request a supply proposal for the Walter Tools BCMT160530R-G55 WKP35G milling insert Technical data SKU: BCMT160530R-G55-WKP35G-WALTER Name: Fräswendeschneidplatte BCMT160530R-G55 WKP35G Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 3 mm Plate size: 16 mm Plate thickness: 0.5 (05) Tolerance class: M Materials & features Grade: WKP35G Series: Tiger·tec Gold Material compatibility: P / K Applications: Steel, Cast iron Geometry: Parallelogram 75° Chipbreaker: G55 Execution: T FAQ What materials is this insert intended for? The BCMT160530R-G55 WKP35G insert is specified for ISO groups P and K, meaning it is intended for steel and cast iron machining. How does the Tiger·tec Gold series benefit machining performance? Tiger·tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, which helps the insert maintain cutting edge integrity and extends tool life in demanding milling operations. What advantages does the 75° parallelogram geometry provide? The 75° parallelogram shape offers a robust cutting edge and flexibility for shoulder and profile milling, enabling effective engagement angles while supporting stable chip control with the G55 chipbreaker. Is the corner radius suitable for roughing operations? With a 3 mm corner radius, the insert provides enhanced edge strength for light roughing and finishing, reducing the likelihood of edge chipping under intermittent cutting conditions. Which chipbreaker is integrated, and what does it do? The integrated G55 chipbreaker is designed to control chip shape and evacuation, improving surface finish consistency and reducing the risk of chip-related interruptions. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, factory-new product from Walter Tools.
BCMT160530R-G55 WPP35G WPP35G Wendeplatten - Walter Tools
Efficient steel machining with proven wear resistance and reliable chip control: the coated-carbide grade WPP35G in a parallelogram 75° geometry delivers consistent performance and long tool life under typical steel cutting conditions; order the BCMT160530R-G55 WPP35G directly via Metav Werkzeuge or ask our consultants if needed BCMT160530R-G55 WPP35G milling insert (for steel) by Walter Tools — Tiger‑tec Gold, G55 chipbreaker A BCMT160530R-G55 WPP35G milling insert engineered for productive steel machining, combining Tiger‑tec Gold coating with a G55 chipbreaker for stable cut conditions Tiger‑tec Gold coating for extended tool life Optimised grade WPP35G for steel machining Parallelogram 75° shape for reliable tool engagement 3 mm corner radius and 7° clearance angle Durable coating for predictable wear and longer tool life The Tiger‑tec Gold coating paired with the WPP35G cemented-carbide substrate offers a measurable improvement in wear resistance and heat protection during continuous steel cutting. Designed specifically for the ISO P group, the grade moderates the thermal and mechanical loads typical of unalloyed and alloyed steels, which helps to preserve edge integrity and maintain dimensional stability over multiple indexings. The result is fewer insert changes and more predictable maintenance scheduling, supporting efficient production planning in jobbing and series environments. Geometry that stabilises chip formation and surface finish The parallelogram 75° plate geometry and G55 chipbreaker work together to control chip flow and reduce cutting forces in interrupted and continuous cuts. A 3 mm corner radius increases resistance to chipping and improves finish on moderate to heavy cuts, while the 7° clearance angle reduces rubbing and heat build-up at the flank. These design choices translate into improved chip control and consistent component quality, especially when machining medium-duty steel components where both robustness and surface integrity are required. Productivity gains through broad steel capability and reliable indexing Optimised for steel applications, this indexable plate supports a wide range of cutting conditions and workpiece types, enabling fewer tool variants across the shop floor. Stable chip formation and a durable coating contribute directly to higher effective cutting times and reduced setup interruptions, enhancing overall throughput. The combination of geometry and grade supports predictable performance in series production and in mixed-batch work, delivering measurable benefits in productivity and process reliability for production engineers and workshop managers. Arrange a technical discussion with Metav Werkzeuge on Walter Tools Tiger‑tec Gold inserts to specify the best threading and milling holders for steel operations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BCMT160530R-G55-WPP35G-WALTER Designation: BCMT160530R-G55 WPP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Clearance angle: 7° Corner radius: 3 Plate form: Parallelogram 75° Plate size: 16 Plate thickness: 05 Tolerance class: M Special features Grade: WPP35G Chipbreaker: G55 Coating: Tiger‑tec Gold (coated carbide) Material suitability: Steel (ISO P) Execution: T SKU / UID: BCMT160530R-G55-WPP35G-WALTER FAQ What materials is this insert suitable for? The BCMT160530R-G55 WPP35G insert is developed for machining steel (ISO P group) and is optimised for typical steel heat and chip formation behaviour. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP35G grade increases wear resistance and thermal protection, extending the insert’s effective life and supporting longer uninterrupted runs. What advantages does the parallelogram 75° shape provide? The parallelogram 75° geometry improves engagement with the tool holder, enhancing stability in interrupted cuts and contributing to consistent surface quality when using the BCMT160530R-G55 WPP35G. Is the G55 chipbreaker suitable for heavy cuts? The G55 chipbreaker is designed to control chips and reduce cutting forces under a range of steel machining conditions; it supports both medium and heavier machining tasks when combined with the appropriate cutting parameters. Can this insert be used in standard milling holders? Yes, the insert’s designation corresponds to common indexable-milling systems; selection of the correct holder and clamping system ensures secure seating and optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The brand names are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the trademark owners. The described article is an original, factory-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com