4 kg Counting Scale, 0.02 g Readability, 230×230 mm Platform, 200000e Resolution, IoT-Ready - KERN

Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —

Secure wall mounting for the indicator offers a compact, reliable solution that frees bench space and improves visibility. Benefit from direct compatibility with KERN DE package scales and a lightweight design of approx. 0.25 kg for effortless integration. Order the component directly via Metav Werkzeuge or consult the team for technical advice. DE-A13 Wall Mount for KERN DE-D Indicator — compatible with KERN DE, lightweight 0.25 kg The DE-A13 Wall Mount is a purpose-designed accessory for secure wall mounting of the indicator belonging to KERN DE package scales, aimed at workshops and industrial weighing stations. Compatible with KERN DE package scales Designed for wall mounting of the DE-D indicator Compact, space-saving installation Weighs approx. 0.25 kg Make more of workshop space with secure wall mounting Mounting the weighing indicator on a dedicated wall bracket converts cluttered workbenches into organised work areas and supports ergonomic viewing angles. The wall mounting option removes the need to dedicate bench area to the display, which is particularly valuable in packing bays and inspection stations where surface area is at a premium. A mounted display delivers consistent sightlines for staff, helping to reduce handling errors and speeding up process steps. The configuration supports stable positioning of the evaluation unit and contributes to repeatable workflow patterns in production and shipping environments. Fast integration with KERN DE systems for dependable operation Compatibility with KERN DE package scales ensures straightforward mechanical fit and electrical interface considerations are minimised at installation. The mount accommodates the weighing indicator, providing a fixed attachment point that keeps the display accessible without occupying valuable bench space. At an approximate weight of 0.25 kg, the accessory is lightweight enough for quick installation yet robust enough to hold the indicator securely. This straightforward integration reduces setup time and helps to maintain continuous operation in busy weighing applications, supporting higher throughput and lower downtime. Practical design that supports professional weighing workflows A reliable mounting solution enhances both stability and operational discipline on the shop floor. Fixed positioning of the evaluation unit improves readability during rapid operations and reduces the risk of accidental knocks that can affect measurement consistency. As an accessory within the scale ecosystem, the mount is intended to complement existing calibration and quality routines, providing a fixed reference point for the indicator. The result is a small but effective improvement in process reliability and ergonomics that benefits technicians, packers and quality inspectors in equal measure. For secure, space-saving mounting of KERN indicators such as the DE-A13, contact Metav Werkzeuge in Emmerich for technical advice and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DE SKU: DE-A13 Manufacturer: KERN GTIN: 4045761135956 Country of origin: CN Weight: 0.25 kg Facts eClass: 21160592 Tariff number: 84239010 Compatibility & features For KERN DE package scales For wall mounting of the DE-D indicator Accessory for scales — category: Zubehör / Accessories FAQ Is this mount compatible with KERN package scales? The DE-A13 wall mount is designed for compatibility with KERN DE package scales and provides a secure attachment point for the associated indicator. Which indicator does the mount support? The mount is intended for the DE-D evaluation unit (indicator) used with KERN DE package scales and secures the display for wall-mounted operation. What is the weight of the wall mount? The DE-A13 wall mount weighs approximately 0.25 kg, making it lightweight for handling and installation while providing stable support for the indicator. Is the mount suitable for workshop and industrial use? Yes, the wall mount is designed to support professional weighing workflows in workshops and industrial environments by improving stability and freeing bench space. Manufacturer: KERN, Country of origin: China

The compact set of protective hoods combines straightforward compatibility with a low-weight design to keep scale indicators operating reliably in busy weighing environments; supplied as a pack of 5, it reduces downtime and simplifies replacements. Take advantage of the proven compatibility with KERN CDS, EOA, DE and DS series and the easy handling that supports uninterrupted weighing processes. Order the KERN DE-A12S05 directly via Metav Werkzeuge or ask our consultants if needed. KERN DE-A12S05 Protective Hood for Scales — Pack of 5, Indicator Protection The KERN DE-A12S05 protective hood is a purpose-made accessory for protecting scale indicators and evaluation units in industrial and retail weighing applications. Pack of 5 protective hoods Compatible with CDS, EOA, DE and DS scales Protects indicator from dust and splashes Lightweight, approx. 90 g per hood Improved uptime through targeted indicator protection A lightweight protective hood minimises contamination of delicate indicator electronics, reducing the frequency of service interventions and calibration checks. Designed to cover the evaluation unit, the hood acts as a barrier against dust and incidental splashes, which helps to maintain measurement integrity and prevents avoidable faults. By preserving the operational condition of the display and controls, the accessory contributes to a more consistent production flow and lower indirect maintenance costs. The compact design also supports quick fitment and replacement, ensuring that normal weighing operations resume without delay. Seamless integration with KERN weighing systems Compatibility with the CDS, EOA, DE and DS series means the hood integrates into existing weighing setups without adaptation, providing a standardised protective solution across different scale types. Supplied as a pack of 5, the set is suitable for multi-station environments or for keeping a replacement supply on hand, which streamlines workshop logistics and reduces administrative effort. Clear compatibility reduces selection uncertainty and makes this accessory a practical addition for procurement planning in industrial metrology and retail weighing contexts. Practical handling and low storage effort At roughly 90 g per hood, the accessory is easy to handle during routine tasks and simple to store when not in use. The modest weight and compact footprint mean that multiple units can be kept on the workshop bench or in a service kit without occupying valuable space. Where visual cleanliness and quick maintenance are priorities, the design supports fast exchange and straightforward housekeeping procedures. Further technical details and application guidance are available from Metav Werkzeuge for those specifying accessories for large-scale installations. For reliable indicator protection choose the KERN DE-A12S05 pack via Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply. Technical data Article number: DE-A12S05 Manufacturer: KERN GTIN: 4045761184480 Country of origin: CN Package contents: 5 pieces Facts Weight: 0.09 kg Tariff number: 39269097 Eclass: 24322502 Special features Compatible with counting scale CDS, package scales EOA and DE, platform scale DS Protective hood for indicator/evaluation unit Packaged as a 5-piece set FAQ Is the hood compatible with all KERN scale displays? The KERN DE-A12S05 is specified for use with the CDS counting scale, the EOA and DE package scales, and the DS platform scale; compatibility with other display models should be verified against the instrument dimensions. What is included in the delivery? Delivery comprises a pack of five protective hoods (KERN DE-A12S05), intended for straightforward replacement or multi-station coverage. Can the hood protect against liquid ingress? The protective hood provides barrier protection against dust and incidental splashes to the indicator; it is not specified as a waterproof enclosure for immersion or sustained exposure to liquids. How heavy is a single hood and what does that mean for handling? Each hood weighs approximately 0.09 kg, making it easy to remove and replace during routine maintenance or cleaning without special handling equipment. Is the hood suitable for use in retail and industrial environments? Yes, the accessory is designed to suit both workshop and retail weighing situations where indicators require protection from contamination and light mechanical impact. KERN · Origin: CN · GTIN: 4045761184480

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271