20mm Boring Bar STFC For TCMT Indexable Inserts With Internal Coolant, 180mm Length - Teknik Makina
€32.00
Product information "20mm Boring Bar STFC For TCMT Indexable Inserts With Internal Coolant, 180mm Length - Teknik Makina"
Take advantage of the combination of internal coolant, left-hand cutting geometry and a compact Ø16 mm shank for stable, coolant-fed turning; order directly via Metav Werkzeuge or consult our specialists for application advice.
Boring bar A16Q STFCL (KA185TM) — STFC for TCMT indexable inserts, internal coolant (Teknik Makina)
A left-hand boring bar A16Q STFCL designed for coolant-fed turning with TCMT 16T3 indexable inserts, suitable for precision external turning and facing on CNC lathes.
- Left-hand cutting direction
- Internal coolant supply
- For TCMT 16T3 indexable inserts
- Shank Ø16 mm, overall length 180 mm
Greater rigidity and repeatable geometry for reliable turning
The A16Q STFCL boring bar combines a compact Ø16 mm shank with a balanced overall length of 180 mm, providing a stable toolholder for standard turning tasks. The short, rigid shank reduces vibration and improves surface finish, while the defined 90° cutting angle ensures predictable engagement for facing and finish turning operations. The low mass (approx. 0.287 kg) reduces spindle load during acceleration and deceleration phases, contributing to consistent cycle times on both manual and CNC lathes.
Coolant-fed performance that prolongs insert life
Equipped with internal coolant, the tool delivers cutting fluid directly to the insert seat and cutting edge, promoting efficient heat control and improved chip evacuation. This focused coolant supply helps to extend the life of indexable inserts and maintain cutting-edge stability under continuous operation. The holder is specified for TCMT 16T3 inserts, enabling the use of widely available carbide grades and coatings suited to a range of machining tasks.
Standardised insert format for easy inventory management
Compatibility with the common TCMT 16T3 insert format simplifies consumable management across the workshop. The STFC style with ISO designation A16Q STFCL aligns with established toolholder standards, facilitating quick insert changes and interchangeability with other holders that accept the same plate. Reduced tooling complexity supports shorter setup times and a more efficient production flow.
Practical benefits for modern shop floors
Left-hand geometry is provided for machining directions that require counterclockwise approach or specific part orientations, and the tool’s internal coolant capability makes it suitable for operations where cooling at the cutting zone is critical. The unit’s compact dimensions and standard insert fit make it a pragmatic choice for calibration of tool libraries and for operations where space and accessibility are limited. The combination of standardised inserts, coolant feed and a robust shank supports predictable performance and lower operational risk.
For machining enquiries or application support for the Teknik Cutting Tools boring bar (A16Q STFCL, SKU KA185TM), contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will recommend the right setup for the job.
Technical data
- SKU: KA185TM
- Manufacturer: Teknik Makina
- ISO designation: A16Q STFCL
- Article name (EN): STFC for TCMT indexable inserts
- ECLASS: 21180806
Key measurements
- Overall length: 180 mm
- Diameter: 20 mm
- Shank diameter: 16 mm
- Cutting height: 30 mm
- Cutting angle: 90°
- Weight: 0.287 kg
Design & special features
- Indexable insert type: TCMT 16T3
- Cutting direction: Left-hand
- Internal coolant: Yes
FAQ
Which insert type fits this toolholder?
The toolholder accepts TCMT 16T3 indexable inserts; the A16Q STFCL geometry is matched for that insert size and seating.
Is the coolant delivered to the cutting edge?
Yes, the boring bar is equipped with internal coolant to supply fluid directly to the insert seat and cutting zone.
What does left-hand cutting direction mean for setup?
Left-hand indicates the cutting approach and insert orientation; the boring bar is configured for operations that require counterclockwise engagement relative to the spindle.
What are the key dimensions to check for machine compatibility?
Confirm the Ø16 mm shank and overall length of 180 mm against the toolpost or turret clamping capacity before installation.
Can this toolholder be used for facing and finishing?
The 90° cutting angle and TCMT insert compatibility make the holder suitable for facing and finish turning where a perpendicular engagement is required.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 90.0 |
|---|---|
| Designation: | Bohrstange |
| Diameter-1: | 20mm |
Passende Wendeplatten Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product characteristics for inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KF3005-SANDVIK ISO-Code: TCMT16T304 Grade: 3005 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: KF Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-3005-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KFH13A-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-H13A-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KM3005-SANDVIK Data & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 3005 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-3005-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KM3210-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 3210 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-3210-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KM3225-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 3225 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-3225-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KMH13A-SANDVIK ISO-Code: TCMT16T304 Grade: H13A Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-H13A-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF1115-SANDVIK ISO-Code: TCMT16T304 Grade: 1115 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: MF Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1115-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF1125-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1125 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1125-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF2015-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 2015 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-2015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF2025-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-2025-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF2220-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 2220 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-2220-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us a sample insert or drawing by post Performance features indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM1105-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1105 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-1105-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product specifications TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM1115-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 1115 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM1125-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1125 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-1125-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product characteristics for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304-MM1205-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1205 Chip Breaker: -MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-1205-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM2015-SANDVIK Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-2015-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing directly by post. Information on technical features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM2025-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-2025-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM2035-SANDVIK Data & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2035 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-2035-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM2220-SANDVIK Dataand Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2220 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-2220-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF1515-SANDVIK ISO-Code: TCMT16T304 Grade: 1515 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: PF Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1515-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF4315-SANDVIK Dataand Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4315-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF4325-SANDVIK ISO-Code: TCMT16T304 Grade: 4325 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-4325-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF4415-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4415 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4415-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF5015-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 5015 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-5015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM1515-SANDVIK Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1515 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1515-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM1525-SANDVIK ISO-Code: TCMT16T304 Grade: 1525 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: PM Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-1525-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM4315-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4315 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4315-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Performance features for insert TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM4335-SANDVIK Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-4335-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product characteristics for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM4415-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4415 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4415-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM5015-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 5015 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-5015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM1115-SANDVIK Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1115 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM1125-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 1125 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1125-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Design details for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM1515-SANDVIK Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1515 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1515-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM235-SANDVIK ISO-Code: TCMT16T304 Grade: M235 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-M235-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4315-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4315-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4325-SANDVIK Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4325-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Product features indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4335-SANDVIK Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4335 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4335-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4415-SANDVIK Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4415 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4425-SANDVIK ISO-Code: TCMT16T304 Grade: 4425 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product details for insert TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UR235-SANDVIK Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: R235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-R235-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UR4315-SANDVIK Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4315-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Design details indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UR4325-SANDVIK ISO-Code: TCMT16T304 Grade: 4325 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UR4425-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4425 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KM3005-SANDVIK ISO-Code: TCMT16T308 Grade: 3005 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: KM Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-3005-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KM3210-SANDVIK ISO-Code: TCMT16T308 Grade: 3210 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: KM Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-3210-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KM3225-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 3225 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-3225-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Detail specifications for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KMH13A-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-H13A-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Information on technical features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KR3205-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 3205 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-3205-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KR3210-SANDVIK Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 3210 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-3210-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product characteristics indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KR3225-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 3225 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-3225-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Product features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KRH13A-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-H13A-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM1105-SANDVIK Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1105 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-1105-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM1115-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1115 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1115-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product characteristics for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM1125-SANDVIK ISO-Code: TCMT16T308 Grade: 1125 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: MM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1125-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Performance features indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308-MM1205-SANDVIK Facts & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 1205 Chip Breaker: -MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1205-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM2015-SANDVIK Facts & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-2015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM2025-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-2025-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM2035-SANDVIK ISO-Code: TCMT16T308 Grade: 2035 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: MM Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-2035-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Technical data TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM2220-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 2220 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-2220-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Design details insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR1105-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1105 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-1105-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR2015-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-2015-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR2025-SANDVIK Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-2025-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR2035-SANDVIK ISO-Code: TCMT16T308 Grade: 2035 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: MR Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-2035-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for TCMT 16T308 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR2220-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2220 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-2220-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Detail specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM1515-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1515 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-1515-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Product characteristics indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM1525-SANDVIK Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 1525 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-1525-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM4305-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4305 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4305-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product features for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM4335-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4335-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM4415-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM4425-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4425 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Specifications for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM5015-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 5015 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-5015-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4315-SANDVIK Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4315-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4325-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4335-SANDVIK Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4335 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4335-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4415-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4425-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T308 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UF4315-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-4315-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Performance features insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UF4325-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product features insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UF4415-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Design details for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UF4425-SANDVIK ISO-Code: TCMT16T308 Grade: 4425 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: UF Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM1115-SANDVIK ISO-Code: TCMT16T308 Grade: 1115 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-1115-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Design details for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM1125-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1125 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1125-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM1515-SANDVIK Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 1515 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1515-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications TCMT 16T308 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM235-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: M235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-M235-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Performance features indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4315-SANDVIK Facts and Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4315-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4325-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4335-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4335 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4335-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Design details for insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4415-SANDVIK Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4425-SANDVIK ISO-Code: TCMT16T308 Grade: 4425 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Technical data indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR235-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: R235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-R235-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR4325-SANDVIK Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR4335-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4335 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-4335-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR4415-SANDVIK ISO-Code: TCMT16T308 Grade: 4415 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: UR Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR4425-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Technical data for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KM3210-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 3210 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-3210-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KM3225-SANDVIK Facts / Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 3225 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-3225-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KMH13A-SANDVIK Data/ Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-H13A-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KR3205-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 3205 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-3205-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Detail specifications for indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KR3210-SANDVIK Facts & Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 3210 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-3210-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KR3225-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 3225 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-3225-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Detail specifications for indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MM1125-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 1125 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-1125-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Information on technical features TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MM2025-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 2025 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-2025-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MM2220-SANDVIK Facts / Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 2220 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-2220-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MR2025-SANDVIK Data/ Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-2025-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product details TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MR2035-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 2035 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-2035-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Technical data insert TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4315-SANDVIK ISO-Code: TCMT16T312 Grade: 4315 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: PM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-4315-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Technical data indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4325-SANDVIK ISO-Code: TCMT16T312 Grade: 4325 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Technical data for TCMT 16T312 insert from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4335-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-4335-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product details for TCMT 16T312 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4415-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4415 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4425-SANDVIK Facts and Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4425 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM5015-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 5015 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-5015-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PR4315-SANDVIK Data/ Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 4315 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-4315-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing directly by post. Technical data for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PR4325-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Features indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PR4415-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 4415 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PR4425-SANDVIK Data & Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4425 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-4425-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Technical data for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312UR2025-SANDVIK ISO-Code: TCMT16T312 Grade: 2025 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: UR Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-2025-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312UR4325-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312UR4425-SANDVIK ISO-Code: TCMT16T312 Grade: 4425 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: UR Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-4425-Sandvik 40END
Passende Wendeplatten ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC8250 Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-TCMT-16T308-IC8250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC5005 Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC5005 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T308-IC5005-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Specifications for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-19IC830 Series: TURNING PVD ISO-Code: TCMT16T308 Grade: IC830 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T308-IC830-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-19IC5005 Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC5005 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T308-IC5005-ISCAR 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Product features indexable inserts TCMT 16T308 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-19IC428 Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: IC428 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-TCMT-16T308-IC428-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product characteristics for indexable inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC9150 Dataand Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC9150 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-TCMT-16T304-IC9150-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC8250 Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC8250-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC9350 Series: TURNING CVD ISO-Code: TCMT16T308 Grade: IC9350 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T308-IC9350-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC907 Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T308-IC907-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Performance features for indexable inserts TCMT 16T308 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC830 Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC830 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T308-IC830-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC8150 Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: IC8150 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC8150-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC807 Series: TURNING PVD ISO-Code: TCMT16T304 Grade: IC807 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-TCMT-16T304-IC807-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product details TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC5005 Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC5005 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T304-IC5005-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Detail specifications for indexable inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-M3MIC807 Series: TURNING PVD ISO-Code: TCMT16T304 Grade: IC807 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC807-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-M3MIC6025 Series: TURNING CVD ISO-Code: TCMT16T304 Grade: IC6025 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC6025-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product characteristics TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-F3PIC807 Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T304-IC807-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Design details indexable inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-14IC50M Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC50M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: ISO MILL/SHRED Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC50M-ISCAR 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing by post. Design details for TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-14IC428 Series: TURNING CVD ISO-Code: TCMT16T304 Grade: IC428 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC428-ISCAR 40END
Passende Wendeplatten MetavCUT
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Features for TCMT 16T308 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T308-Steel Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T308-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for TCMT 16T312 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T312-Aluminium Facts & Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T312-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Information on technical features TCMT 16T304 inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T304-Stainless ISO-Code: TCMT16T304 Usage for: Stainless steel Material: cemented carbide Form: triangular Usable to the work on: Stainless Steel Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T304-Stainless Steel-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Detail specifications TCMT 16T304 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T304-Steel Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T304-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product features for indexable inserts TCMT 16T304 from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T304-Aluminium Data & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T304-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Detail specifications TCMT 16T308 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T308-Aluminium Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T308-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts TCMT 16T312 from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T312-Stainless Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T312-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts TCMT 16T308 from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T308-Stainless Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T308-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications TCMT 16T312 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T312-Steel Dataand Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T312-Stahl-MetavCUT 40END
Passende Wendeplatten Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MF-KCK20B-KENNAMETAL Facts / Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCK20B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCU10B-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCU10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCP25C-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP25C Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T312-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCP25-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCP10B-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP10B Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCK20B-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCK20B-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Information on technical features TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCK20-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCK20 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T312-KCK20-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T308 insert from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCP10-KENNAMETAL Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP10-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCM35-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCM35 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCM35-Kennametal 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing directly by post. Product details for TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCK20-KENNAMETAL Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCK20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCK20-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Design details TCMT 16T308 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCK15B-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCK15B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KCK15B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics for indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCK15-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: KCK15 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T312-KCK15-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Technical data for indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KC5010-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T312-KC5010-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Performance features for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312FP-KCU25-KENNAMETAL Dataand Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCU25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCU25-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Specifications insert TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312FP-KCS10-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCS10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCS10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCS10B-KENNAMETAL Facts and Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCS10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCS10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Specifications insert TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308FP-KCP25-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KCP25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Technical data for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308FP-KCP10-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304MP-KCS10B-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCS10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCS10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T302 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T302LF-KC5025-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T302 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.2 Features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T302-KC5025-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCU10B-KENNAMETAL ISO-Code: TCMT16T308 Grade: KCU10B Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCU10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCP25C-KENNAMETAL Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCP25-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCP10B-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Technical data indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCM25B-KENNAMETAL ISO-Code: TCMT16T308 Grade: KCM25B Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCM25B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for TCMT 16T308 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCM25-KENNAMETAL ISO-Code: TCMT16T308 Grade: KCM25 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCM25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MP-KCP25C-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP25C Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Information on technical features for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MP-KCP25-KENNAMETAL Facts / Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCP25-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product details indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MF-KCP25C-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP25C Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP25C-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCP25C-KENNAMETAL Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25C-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCP25-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCP10-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics insert TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCM25B-KENNAMETAL Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCM25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KCM25B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCM15-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCM15 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KCM15-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCK20B-KENNAMETAL Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCK20B-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCP30-KENNAMETAL Facts and Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP30 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCP30-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Product details inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCP25C-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25C-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product specifications for TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304MP-KCM25B-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCM25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T304-KCM25B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features insert TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KT315-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KT315-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCU10B-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCU10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCP25C-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Specifications indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCP10B-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KCP10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCM35-KENNAMETAL Facts and Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCM35 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCM35-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product details TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCM25B-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCM25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCM25B-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Features indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCK20B-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KCK20B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCK20B-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCK20B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product features for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCK20-KENNAMETAL ISO-Code: TCMT16T308 Grade: KCK20 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCK20-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCK15B-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCK15B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCK15B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCK15-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCK15 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCK15-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KC850-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KC850 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KC850-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Design details indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KC730-KENNAMETAL Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KC730 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KC730-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KC5025-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KC5025-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MF-KCP25B-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP25B Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP25B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCP25-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KC5025-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KC5025-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KC5010-KENNAMETAL ISO-Code: TCMT16T304 Grade: KC5010 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KC5010-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Features indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304FP-KCU25-KENNAMETAL ISO-Code: TCMT16T304 Grade: KCU25 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KCU25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304FP-KCS10-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCS10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T304-KCS10-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Information on technical features indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304FP-KCP25C-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCP25C-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T304 insert from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304FP-KCP25-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCP25-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product details indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T30411-KT325-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KT325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T304-KT325-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308FP-KTP10-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KTP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KTP10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product characteristics indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T30411-KT315-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KT315-Kennametal 40END