25mm STFC Boring Bar For TCMT 16T3 Inserts, Left-Handed 32mm Cutting Height, Internal Coolant - Teknik Makina
€32.00
Product information "25mm STFC Boring Bar For TCMT 16T3 Inserts, Left-Handed 32mm Cutting Height, Internal Coolant - Teknik Makina"
Take advantage of a robust combination of secure clamping, precise geometry and integrated coolant for dependable internal turning operations; benefit from straightforward compatibility with TCMT inserts and order or request advice via Metav Werkzeuge for technical guidance.
KA186TM Boring bar – STFC for TCMT indexable inserts, left-hand, internal coolant (Teknik Makina)
The KA186TM boring bar is a left-hand tool optimised for internal turning with TCMT indexable inserts, designed for medium- to heavy-duty workshop applications.
Left-hand cutting for internal turning Internal coolant for improved chip evacuation Compatible with TCMT 16T3 indexable inserts
Secure performance for internal turning with minimal setup
The design delivers a stable cutting platform for internal operations: the bar conforms to the A16Q STFCL ISO form and accepts standard TCMT 16T3 inserts, ensuring fast insert changes and predictable geometry. With a nominal body diameter of Ø25 mm and a shaft Ø20 mm, the tool provides rigidity where it matters, reducing chatter and enabling consistent bore finishes. The 90° cutting angle creates a controlled engagement typical for facing and internal profiles, so cycle times can be planned with repeatable results. These concrete technical attributes translate into fewer set-ups and more productive machining hours on the shop floor.
Precision, compatibility and secure clamping for consistent results
A cutting height of 32 mm combined with an overall length 180 mm balances access and stiffness for many internal turning tasks; the relatively low mass (0.44 kg) keeps centrifugal loads modest while allowing rotary tooling units to operate without added imbalance. The tool is supplied to suit a clamping interface around clamping size 16, which gives a secure seat for the indexable insert and helps maintain repeatability across multiple tool changes. Indexable insert systems reduce per-part cost by allowing quick replacement of cutting edges rather than whole tools, and the ISO designation removes uncertainty when matching holders and inserts from different suppliers.
Integrated coolant and practical benefits for workshop efficiency
Integrated internal coolant directs cutting fluid through the tool body to the cutting edge, improving chip evacuation and cooling the insert contact zone; this extends insert life and supports higher feed rates in many materials. The left-hand specification is advantageous where tool approach or machine spindle direction requires a reversed cutting orientation. For operations migrating from solid tools to indexable systems, this bar simplifies the transition: it pairs established insert geometry with a compact holder profile, so inventory and training demands remain small. Backed by a quality-focused supply chain, the combination of compatibility and coolant support helps workshops meet tighter tolerances with less rework.
For reliable left-hand internal turning choose the Teknik Makina KA186TM boring bar and contact Metav Werkzeuge for ordering or tailored technical advice to ensure optimal tool selection and integration into current setups
Technical data
- Article number: KA186TM
- Manufacturer: Teknik Makina
- Type: STFC for TCMT indexable inserts
- ISO designation: A16Q STFCL
Facts
- Diameter: 25 mm
- Shaft diameter: 20 mm
- Cutting height: 32 mm
- Overall length: 180 mm
- Weight: 0.44 kg
- Cutting angle: 90°
Special features
- Left-hand cutting direction
- Internal coolant
- Suitable for TCMT 16T3 inserts
- Clamping size 16
FAQ
Which insert size fits this boring bar?
The KA186TM is designed to accept TCMT 16T3 indexable inserts for straightforward edge replacement and economical running costs.
Does the bar provide through-tool coolant?
Yes, the tool features internal coolant, routed to the cutting zone to aid chip control and prolong insert life.
Is the cutting direction left-hand or right-hand?
This holder is specified for left-hand cutting, suitable for applications that require a reversed approach or spindle orientation.
What are the main dimensions to consider for machine setup?
Key dimensions are Ø25 mm body diameter, shaft Ø20 mm, cutting height 32 mm and an overall length of 180 mm, with a mass of 0.44 kg.
What ISO designation ensures compatibility with other tooling?
The holder follows the A16Q STFCL ISO form to simplify matching with standard clamping systems and accessories.
Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 90.0 |
|---|---|
| Designation: | Bohrstange |
| Diameter-1: | 25mm |
Passende Wendeplatten ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC8250 Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-TCMT-16T308-IC8250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC5005 Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC5005 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T308-IC5005-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Specifications for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-19IC830 Series: TURNING PVD ISO-Code: TCMT16T308 Grade: IC830 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T308-IC830-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-19IC5005 Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC5005 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T308-IC5005-ISCAR 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Product features indexable inserts TCMT 16T308 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-19IC428 Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: IC428 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-TCMT-16T308-IC428-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product characteristics for indexable inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC9150 Dataand Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC9150 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-TCMT-16T304-IC9150-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC8250 Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC8250-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC9350 Series: TURNING CVD ISO-Code: TCMT16T308 Grade: IC9350 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T308-IC9350-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for TCMT 16T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC907 Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T308-IC907-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Performance features for indexable inserts TCMT 16T308 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T308-SMIC830 Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: IC830 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T308-IC830-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC8150 Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: IC8150 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC8150-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC807 Series: TURNING PVD ISO-Code: TCMT16T304 Grade: IC807 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-TCMT-16T304-IC807-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product details TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-SMIC5005 Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC5005 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T304-IC5005-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Detail specifications for indexable inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-M3MIC807 Series: TURNING PVD ISO-Code: TCMT16T304 Grade: IC807 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC807-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-M3MIC6025 Series: TURNING CVD ISO-Code: TCMT16T304 Grade: IC6025 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC6025-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product characteristics TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-F3PIC807 Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-TCMT-16T304-IC807-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Design details indexable inserts TCMT 16T304 from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-14IC50M Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC50M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Series: ISO MILL/SHRED Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC50M-ISCAR 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing by post. Design details for TCMT 16T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: TCMT16T304-14IC428 Series: TURNING CVD ISO-Code: TCMT16T304 Grade: IC428 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-TCMT-16T304-IC428-ISCAR 40END
Passende Wendeplatten MetavCUT
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Features for TCMT 16T308 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T308-Steel Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T308-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for TCMT 16T312 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T312-Aluminium Facts & Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T312-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Information on technical features TCMT 16T304 inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T304-Stainless ISO-Code: TCMT16T304 Usage for: Stainless steel Material: cemented carbide Form: triangular Usable to the work on: Stainless Steel Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T304-Stainless Steel-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Detail specifications TCMT 16T304 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T304-Steel Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T304-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product features for indexable inserts TCMT 16T304 from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T304-Aluminium Data & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T304-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Detail specifications TCMT 16T308 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T308-Aluminium Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T308-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts TCMT 16T312 from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T312-Stainless Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T312-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts TCMT 16T308 from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T308-Stainless Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T308-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications TCMT 16T312 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: TCMT16T312-Steel Dataand Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-TCMT-16T312-Stahl-MetavCUT 40END
Passende Wendeplatten Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MF-KCK20B-KENNAMETAL Facts / Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCK20B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCU10B-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCU10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCP25C-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP25C Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T312-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCP25-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCP10B-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP10B Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCK20B-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCK20B-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Information on technical features TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCK20-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCK20 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T312-KCK20-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T308 insert from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCP10-KENNAMETAL Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP10-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCM35-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCM35 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCM35-Kennametal 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing directly by post. Product details for TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCK20-KENNAMETAL Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCK20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCK20-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Design details TCMT 16T308 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCK15B-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCK15B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KCK15B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics for indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KCK15-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: KCK15 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T312-KCK15-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Technical data for indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312LF-KC5010-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T312-KC5010-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Performance features for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312FP-KCU25-KENNAMETAL Dataand Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCU25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCU25-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Specifications insert TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312FP-KCS10-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCS10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCS10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCS10B-KENNAMETAL Facts and Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCS10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCS10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Specifications insert TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308FP-KCP25-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KCP25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Technical data for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308FP-KCP10-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304MP-KCS10B-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCS10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCS10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T302 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T302LF-KC5025-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T302 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.2 Features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T302-KC5025-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCU10B-KENNAMETAL ISO-Code: TCMT16T308 Grade: KCU10B Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCU10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCP25C-KENNAMETAL Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCP25-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCP10B-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Technical data indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCM25B-KENNAMETAL ISO-Code: TCMT16T308 Grade: KCM25B Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCM25B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for TCMT 16T308 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCM25-KENNAMETAL ISO-Code: TCMT16T308 Grade: KCM25 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCM25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MP-KCP25C-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP25C Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Information on technical features for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MP-KCP25-KENNAMETAL Facts / Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T312-KCP25-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product details indexable inserts TCMT 16T312 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MF-KCP25C-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP25C Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP25C-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCP25C-KENNAMETAL Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25C-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCP25-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCP10-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics insert TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCM25B-KENNAMETAL Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCM25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KCM25B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCM15-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCM15 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KCM15-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MP-KCK20B-KENNAMETAL Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCK20B-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCP30-KENNAMETAL Facts and Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP30 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCP30-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Product details inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCP25C-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25C-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product specifications for TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304MP-KCM25B-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCM25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T304-KCM25B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features insert TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KT315-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KT315-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCU10B-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCU10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCP25C-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Specifications indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCP10B-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KCP10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCM35-KENNAMETAL Facts and Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCM35 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCM35-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product details TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCM25B-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCM25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCM25B-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Features indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KCK20B-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KCK20B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCK20B-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCK20B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCK20B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product features for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCK20-KENNAMETAL ISO-Code: TCMT16T308 Grade: KCK20 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCK20-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCK15B-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KCK15B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCK15B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KCK15-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCK15 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KCK15-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features TCMT 16T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KC850-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KC850 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KC850-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Design details indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KC730-KENNAMETAL Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KC730 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KC730-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308LF-KC5025-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T308-KC5025-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for TCMT 16T312 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T312MF-KCP25B-KENNAMETAL ISO-Code: TCMT16T312 Grade: KCP25B Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T312-KCP25B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308MF-KCP25-KENNAMETAL Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T308-KCP25-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KC5025-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KC5025-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304LF-KC5010-KENNAMETAL ISO-Code: TCMT16T304 Grade: KC5010 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KC5010-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Features indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304FP-KCU25-KENNAMETAL ISO-Code: TCMT16T304 Grade: KCU25 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 60° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KCU25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for TCMT 16T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304FP-KCS10-KENNAMETAL Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCS10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T304-KCS10-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Information on technical features indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304FP-KCP25C-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCP25C-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T304 insert from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T304FP-KCP25-KENNAMETAL Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-TCMT-16T304-KCP25-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product details indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T30411-KT325-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KT325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-TCMT-16T304-KT325-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts TCMT 16T308 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T308FP-KTP10-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: KTP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T308-KTP10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product characteristics indexable inserts TCMT 16T304 from Kennametal Brand: Kennametal Manufacturer Order Number: TCMT16T30411-KT315-KENNAMETAL Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Angle: 60° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-TCMT-16T304-KT315-Kennametal 40END
Passende Wendeplatten Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product characteristics for inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KF3005-SANDVIK ISO-Code: TCMT16T304 Grade: 3005 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: KF Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-3005-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KFH13A-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-H13A-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KM3005-SANDVIK Data & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 3005 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-3005-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KM3210-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 3210 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-3210-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KM3225-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 3225 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-3225-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304KMH13A-SANDVIK ISO-Code: TCMT16T304 Grade: H13A Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-H13A-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF1115-SANDVIK ISO-Code: TCMT16T304 Grade: 1115 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: MF Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1115-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF1125-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1125 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1125-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF2015-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 2015 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-2015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF2025-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-2025-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MF2220-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 2220 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-2220-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us a sample insert or drawing by post Performance features indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM1105-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1105 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-1105-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product specifications TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM1115-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 1115 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM1125-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1125 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-1125-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product characteristics for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304-MM1205-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1205 Chip Breaker: -MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-1205-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM2015-SANDVIK Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-2015-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing directly by post. Information on technical features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM2025-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-2025-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM2035-SANDVIK Data & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2035 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-2035-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304MM2220-SANDVIK Dataand Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2220 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-2220-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF1515-SANDVIK ISO-Code: TCMT16T304 Grade: 1515 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: PF Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1515-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF4315-SANDVIK Dataand Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4315-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF4325-SANDVIK ISO-Code: TCMT16T304 Grade: 4325 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-4325-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF4415-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4415 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4415-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PF5015-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 5015 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-5015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM1515-SANDVIK Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1515 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1515-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM1525-SANDVIK ISO-Code: TCMT16T304 Grade: 1525 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: PM Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-1525-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM4315-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4315 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4315-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Performance features for insert TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM4335-SANDVIK Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-4335-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product characteristics for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM4415-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4415 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4415-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304PM5015-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 5015 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-5015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Features TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM1115-SANDVIK Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1115 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM1125-SANDVIK Facts for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 1125 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1125-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Design details for indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM1515-SANDVIK Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1515 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-1515-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM235-SANDVIK ISO-Code: TCMT16T304 Grade: M235 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T304-M235-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4315-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4315-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4325-SANDVIK Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4325-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Product features indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4335-SANDVIK Data/ Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4335 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4335-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4415-SANDVIK Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4415 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UM4425-SANDVIK ISO-Code: TCMT16T304 Grade: 4425 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product details for insert TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UR235-SANDVIK Facts / Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: R235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-R235-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UR4315-SANDVIK Facts & Figures: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T304-4315-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Design details indexable inserts TCMT 16T304 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UR4325-SANDVIK ISO-Code: TCMT16T304 Grade: 4325 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for TCMT 16T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T304UR4425-SANDVIK Figures for the tool: ISO-Code: TCMT16T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 4425 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T304-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KM3005-SANDVIK ISO-Code: TCMT16T308 Grade: 3005 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: KM Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-3005-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KM3210-SANDVIK ISO-Code: TCMT16T308 Grade: 3210 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: KM Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-3210-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KM3225-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 3225 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-3225-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Detail specifications for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KMH13A-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-H13A-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Information on technical features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KR3205-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 3205 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-3205-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KR3210-SANDVIK Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 3210 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-3210-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product characteristics indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KR3225-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 3225 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-3225-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Product features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308KRH13A-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-H13A-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM1105-SANDVIK Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1105 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-1105-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM1115-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1115 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1115-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product characteristics for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM1125-SANDVIK ISO-Code: TCMT16T308 Grade: 1125 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: MM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1125-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Performance features indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308-MM1205-SANDVIK Facts & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 1205 Chip Breaker: -MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1205-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM2015-SANDVIK Facts & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-2015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM2025-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-2025-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM2035-SANDVIK ISO-Code: TCMT16T308 Grade: 2035 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: MM Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-2035-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Technical data TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MM2220-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 2220 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-2220-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Design details insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR1105-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1105 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-1105-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR2015-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-2015-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR2025-SANDVIK Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-2025-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR2035-SANDVIK ISO-Code: TCMT16T308 Grade: 2035 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: MR Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-2035-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for TCMT 16T308 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308MR2220-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 2220 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-2220-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Detail specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM1515-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1515 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-1515-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Product characteristics indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM1525-SANDVIK Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 1525 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-1525-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM4305-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4305 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4305-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product features for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM4335-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4335-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM4415-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM4425-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4425 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Specifications for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PM5015-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 5015 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-5015-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4315-SANDVIK Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4315-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4325-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4335-SANDVIK Dataand Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4335 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4335-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4415-SANDVIK Facts / Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308PR4425-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features TCMT 16T308 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UF4315-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-4315-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Performance features insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UF4325-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product features insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UF4415-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Design details for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UF4425-SANDVIK ISO-Code: TCMT16T308 Grade: 4425 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: UF Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM1115-SANDVIK ISO-Code: TCMT16T308 Grade: 1115 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-1115-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Design details for TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM1125-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 1125 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1125-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM1515-SANDVIK Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 1515 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-1515-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications TCMT 16T308 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM235-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: M235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-M235-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Performance features indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4315-SANDVIK Facts and Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4315-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4325-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4335-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4335 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4335-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Design details for insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4415-SANDVIK Data & Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UM4425-SANDVIK ISO-Code: TCMT16T308 Grade: 4425 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Technical data indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR235-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: R235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T308-R235-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for insert TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR4325-SANDVIK Data/ Figures: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR4335-SANDVIK Facts for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 4335 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T308-4335-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts TCMT 16T308 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR4415-SANDVIK ISO-Code: TCMT16T308 Grade: 4415 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: UR Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4415-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T308 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T308UR4425-SANDVIK Figures for the tool: ISO-Code: TCMT16T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T308-4425-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Technical data for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KM3210-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 3210 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-3210-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KM3225-SANDVIK Facts / Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 3225 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-3225-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KMH13A-SANDVIK Data/ Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-H13A-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KR3205-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 3205 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-3205-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Detail specifications for indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KR3210-SANDVIK Facts & Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 3210 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-3210-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312KR3225-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 3225 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-3225-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Detail specifications for indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MM1125-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 1125 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-1125-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Information on technical features TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MM2025-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 2025 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-2025-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MM2220-SANDVIK Facts / Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 2220 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-2220-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MR2025-SANDVIK Data/ Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-2025-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product details TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312MR2035-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 2035 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-2035-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Technical data insert TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4315-SANDVIK ISO-Code: TCMT16T312 Grade: 4315 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: PM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-4315-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Technical data indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4325-SANDVIK ISO-Code: TCMT16T312 Grade: 4325 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Technical data for TCMT 16T312 insert from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4335-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-4335-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product details for TCMT 16T312 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4415-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4415 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM4425-SANDVIK Facts and Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4425 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PM5015-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 5015 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-5015-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PR4315-SANDVIK Data/ Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 4315 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-4315-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing directly by post. Technical data for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PR4325-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Features indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PR4415-SANDVIK Figures for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Features Material: cemented carbide Grade: 4415 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-TCMT-16T312-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312PR4425-SANDVIK Data & Figures: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4425 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-4425-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Technical data for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312UR2025-SANDVIK ISO-Code: TCMT16T312 Grade: 2025 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: UR Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-2025-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts TCMT 16T312 from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312UR4325-SANDVIK Facts for the tool: ISO-Code: TCMT16T312 Clearance Angle: 7° Thickness: 3,97mm Radius: 1.2 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: triangular Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-TCMT-16T312-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications for TCMT 16T312 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: TCMT16T312UR4425-SANDVIK ISO-Code: TCMT16T312 Grade: 4425 Material: cemented carbide Form: triangular Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 1.2 Chip Breaker: UR Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-TCMT-16T312-4425-Sandvik 40END