1500 kg Platform Scale 500 g Readability, Anti‑Slip Chequer Plate, 45 mm Ramp Height, IP67, OIML R60 Class III - KERN
€2,100.00
Product information "1500 kg Platform Scale 500 g Readability, Anti‑Slip Chequer Plate, 45 mm Ramp Height, IP67, OIML R60 Class III - KERN"
Take advantage of the combination of robust design, precise legal‑for‑trade performance and easy access for trolleys and pallet trucks; the integrated ramps and low entry minimise handling time while IP67‑rated, silicone‑coated load cells ensure reliable operation in demanding conditions. Order the weighbridge directly via Metav Werkzeuge or consult our specialists for configuration advice.
KFD.1500V20LM Weighbridge by KERN — 1500 kg capacity, low‑entry 45 mm
The KFD.1500V20LM is a heavy‑duty industrial weighbridge designed for accurate, legal‑for‑trade weighing up to 1500 kg, featuring a slip‑resistant steel checker plate and two integrated ramps for effortless loading.
- Slip‑resistant steel checker plate surface
- Flat‑entry design with 45 mm ramp height
- 1500 kg capacity with 500 g readability
- IP67 protection and four alloy load cells
Precision that meets legal requirements for trade
This floor scale delivers certified, repeatable results thanks to OIML R60 Class III approval and a measuring range up to 1500 kg with 500 g readability. The system’s reproducibility (0.2 kg) and linearity (±0.4 kg) keep measurements stable under routine use, reducing the need for frequent recalibration. For companies that trade by weight, the standard conformity means fewer compliance hurdles and greater confidence in every transaction.
Practical design for fast handling and safe operation
A checker plate, made from slip‑resistant steel, provides secure footing and protects the platform in workshop and warehouse environments. Integrated ramps eliminate trip hazards and the 45 mm low‑entry simplifies loading with trolleys and small pallet trucks, improving workflow and lowering handling time. The extremely rigid, painted construction enhances long‑term durability and supports consistent weighing performance under heavy use.
Durable electronics and site‑ready protection
Weighing is performed by four alloy strain‑gauge load cells that are silicone‑coated for added protection; the system is rated IP67, meaning temporary immersion resistance and robust protection against dust ingress—suitable for washdown areas and harsh conditions. Power is supplied via a 107–230 V AC mains adaptor (EU plug included) and an optional battery version is available with around 7 hours charging time, allowing flexible placement where mains access is limited. Operating limits of -10°C to 40°C and a max ambient humidity of 80% ensure dependable performance in typical industrial settings.
Discuss configuration and delivery options with Metav Werkzeuge—rely on our Emmerich‑based supply and technical expertise to specify the right weighbridge for the workshop or production line
Technical data
- Article number: KFD.1500V20LM
- Manufacturer: KERN
- SKU: KFD.1500V20LM
- GTIN: 4045761135659
Facts
- Capacity: 1500 kg
- Readability: 500 g
- Minimum weight: 10 kg
- Platform dimensions: 1800×1400×78 mm
- Rectangular platform: 1200×1200 mm
- Ramp height: 45 mm
- Repeatability: 0.2 kg
- Linearity: ±0.4 kg
- Operating temperature: -10°C to 40°C
- Max ambient humidity: 80%
- Weight: 175 kg
- OIML class: R60 (Class III, 3000 e)
Special features
- Platform: painted, slip‑resistant steel checker plate
- Load cells: four alloy, silicone‑coated
- Protection class: IP67
- Weighing system: strain‑gauge load cells
- Power supply: 107–230 V AC, EU adaptor included
- Battery: optional (factory), charge time 7 h
- Integrated ramps: two ramps for easy access
- Origin: CN
- Commodity code: 90318080
FAQ
Is this weighbridge suitable for legal‑for‑trade applications?
Yes. The KFD.1500V20LM is OIML R60 certified to Class III (3000 e), making it suitable for legal‑for‑trade operations where certified weighing is required.
Can the scale be used outdoors or in wet environments?
The unit’s IP67 rating and silicone‑coated load cells provide robust protection against dust and temporary immersion, which supports use in wet or washdown environments when installed correctly and sheltered from extreme weather.
What makes the platform suitable for daily industrial use?
The painted, slip‑resistant steel checker plate surface combined with an extremely rigid frame and integrated ramps ensures safe, durable handling and minimal maintenance under heavy traffic.
Is a mains connection required, and is battery operation available?
A mains adaptor (107–230 V AC) with EU plug is supplied; an optional factory‑fitted battery is available for sites without convenient mains access and charges in approximately 7 hours.
Which load cells are used and how do they affect accuracy?
Four alloy strain‑gauge load cells, silicone‑coated for protection, provide stable force measurement and contribute to the stated reproducibility and linearity figures, ensuring consistent weighing results.
Manufacturer: KERN
Address: Origin country CN
Contact: not specified
Zubehör
Stable anchoring for precise weighing: the accessory secures the weighing bridge to the floor, compatible with common bridge plate footprints and designed for rapid installation; order the pair of base plates directly via Metav Werkzeuge or consult our specialists for application advice. Pair of base plates for BFB — floor anchor for weighing bridge, KERN Pair of base plates for stable fixation of a weighing bridge in industrial and workshop environments Pair of base plates for floor anchoring Compatible with plate sizes up to 1500x1500x85mm Quick fixation of weighing bridge to floor Lightweight design, total weight 0.74 kg Secure foundation for repeatable weighing results A reliable weighing process depends on mechanical stability. The pair of base plates provides a defined interface between the scale and the floor, reducing micro-movements that can cause measurement scatter. Designed for use with stationary platforms, the accessory improves repeatability by stabilising the load path of the weighing bridge. Compatibility with footprints from 1000×1000×85 mm up to 1500×1500×85 mm ensures the anchoring solution matches common industrial bridge sizes, helping to maintain consistent results across shifts and operators. Fast fitting that minimises downtime Installation is straightforward and engineered for workshop efficiency. The base-plate pair (BFS-A06N) features a compact form and lightweight total mass (0.74 kg), allowing quicker positioning and bolting with standard toolsets. Because the plates are intended solely for mechanical fixation, they do not alter the metrological behaviour of the scale and so support existing calibration intervals. The result is reduced installation time, minimal production interruption and straightforward retrofitting into established weighing set-ups. Integrates with professional procurement and operations Supplied as an accessory for KERN systems, these mounting plates fit into an organised spare-part strategy and simplify inventory management for maintenance teams. Availability through Metav supports reliable supply from a European stock point, reducing lead times and smoothing workshop logistics. Where consistent throughput and predictable maintenance are priorities, the plates serve as a small but effective component of a controlled weighing workflow. For direct procurement or technical clarification on the KERN BFS-A06N pair of base plates contact Metav Werkzeuge—order via Metav or request tailored advice from our Emmerich-based team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BFS-A06N Manufacturer: KERN GTIN: 4045761180062 Country of origin: CN Facts Weight: 0.74 kg Suitable for plate sizes: 1000×1000×85 mm, 1500×1250×85 mm, 1500×1500×85 mm ECLASS: 21130190 Tariff code: 84239010 Special features Application: Fixation of weighing bridge to floor Compatible with BFB systems Matching accessory for KERN weighing bridges Packaged for workshop logistics FAQ What is the primary function of the pair of base plates? The pair of base plates (BFS-A06N) secures the weighing bridge to the floor, providing a defined mechanical interface that reduces movement and improves repeatability. Which bridge sizes are compatible with these base plates? Compatibility covers bridge plate footprints of 1000×1000×85 mm, 1500×1250×85 mm and 1500×1500×85 mm as specified for the accessory. What is the weight of the KERN BFS-A06N accessory? The total weight for the base-plate pair is 0.74 kg. Is the material specified for the base plates? Material details are not specified in the product data; refer to the KERN product documentation for construction specifics if required. Where is this accessory manufactured? The KERN base-plate pair BFS-A06N is listed with country of origin CN (China). KERN, Country of origin: CN