3000 kg Floor Scale Platform 1500×1500mm Three-Point Silicone‑Coated Aluminium Load Cell IP65, OIML Class III, 1 kg Readability - KERN

Stable anchoring for precise weighing: the accessory secures the weighing bridge to the floor, compatible with common bridge plate footprints and designed for rapid installation; order the pair of base plates directly via Metav Werkzeuge or consult our specialists for application advice. Pair of base plates for BFB — floor anchor for weighing bridge, KERN Pair of base plates for stable fixation of a weighing bridge in industrial and workshop environments Pair of base plates for floor anchoring Compatible with plate sizes up to 1500x1500x85mm Quick fixation of weighing bridge to floor Lightweight design, total weight 0.74 kg Secure foundation for repeatable weighing results A reliable weighing process depends on mechanical stability. The pair of base plates provides a defined interface between the scale and the floor, reducing micro-movements that can cause measurement scatter. Designed for use with stationary platforms, the accessory improves repeatability by stabilising the load path of the weighing bridge. Compatibility with footprints from 1000×1000×85 mm up to 1500×1500×85 mm ensures the anchoring solution matches common industrial bridge sizes, helping to maintain consistent results across shifts and operators. Fast fitting that minimises downtime Installation is straightforward and engineered for workshop efficiency. The base-plate pair (BFS-A06N) features a compact form and lightweight total mass (0.74 kg), allowing quicker positioning and bolting with standard toolsets. Because the plates are intended solely for mechanical fixation, they do not alter the metrological behaviour of the scale and so support existing calibration intervals. The result is reduced installation time, minimal production interruption and straightforward retrofitting into established weighing set-ups. Integrates with professional procurement and operations Supplied as an accessory for KERN systems, these mounting plates fit into an organised spare-part strategy and simplify inventory management for maintenance teams. Availability through Metav supports reliable supply from a European stock point, reducing lead times and smoothing workshop logistics. Where consistent throughput and predictable maintenance are priorities, the plates serve as a small but effective component of a controlled weighing workflow. For direct procurement or technical clarification on the KERN BFS-A06N pair of base plates contact Metav Werkzeuge—order via Metav or request tailored advice from our Emmerich-based team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BFS-A06N Manufacturer: KERN GTIN: 4045761180062 Country of origin: CN Facts Weight: 0.74 kg Suitable for plate sizes: 1000×1000×85 mm, 1500×1250×85 mm, 1500×1500×85 mm ECLASS: 21130190 Tariff code: 84239010 Special features Application: Fixation of weighing bridge to floor Compatible with BFB systems Matching accessory for KERN weighing bridges Packaged for workshop logistics FAQ What is the primary function of the pair of base plates? The pair of base plates (BFS-A06N) secures the weighing bridge to the floor, providing a defined mechanical interface that reduces movement and improves repeatability. Which bridge sizes are compatible with these base plates? Compatibility covers bridge plate footprints of 1000×1000×85 mm, 1500×1250×85 mm and 1500×1500×85 mm as specified for the accessory. What is the weight of the KERN BFS-A06N accessory? The total weight for the base-plate pair is 0.74 kg. Is the material specified for the base plates? Material details are not specified in the product data; refer to the KERN product documentation for construction specifics if required. Where is this accessory manufactured? The KERN base-plate pair BFS-A06N is listed with country of origin CN (China). KERN, Country of origin: CN

Take advantage of the painted-steel construction, the 1500×740×90 mm footprint and proven platform compatibility to streamline loading and weighing operations. Order the ramp directly via Metav Werkzeuge or contact our consultants for integration advice. BFS-A09N loading ramp by KERN — 1500×740×90 mm, painted steel The BFS-A09N is a robust loading ramp for platform scales, designed to facilitate safe and consistent transfer of goods onto BFB-style weighing systems. Painted steel construction for durability Dimensions 1500×740×90 mm for stable approach Compatible with 1500×1500×85 mm platforms Robust 69 kg design for secure loading Improved handling and consistent weighing results The loading ramp delivers a smoother transfer of trolleys and pallet trucks onto the weighing platform, reducing start‑stop disturbances that can affect readings. The combination of a low approach height and a stable contact surface helps to minimise oscillation of the scale during entry, which in turn supports more reliable weight capture and fewer repeat measurements. By integrating a dedicated access ramp, production and logistics workflows benefit from quicker, more predictable weighing routines, improving throughput without compromising accuracy. Engineered for workshop and industrial metrology Constructed from painted steel, the ramp resists everyday wear and offers a maintenance‑friendly surface finish that tolerates workshop conditions. Its footprint of 1500×740×90 mm provides a wide, stable approach suited to standard platform sizes, while the overall mass of 69 kg ensures the ramp remains in place during operation. The component is tailored for the industrial metrology context, meaning it connects seamlessly with platform scale setups and reduces handling risks during weighing tasks. Seamless compatibility with platform scales This ramp is specified for use with models featuring a weighing plate size of 1500×1500×85 mm, enabling a consistent interface between floor level and scale platform. Compatibility with BFB systems ensures that mechanical alignment and ramp geometry match common scale configurations, which aids in preventing loading errors and preserves the integrity of the weighing process. Clear specification of platform match avoids costly adaptations and supports efficient installation. Reliability that reduces lifecycle costs A simple, robust design translates into fewer failure modes and lower upkeep requirements. The painted finish reduces the need for frequent surface treatment, and the solid steel construction withstands the mechanical stresses of regular loading. Choosing a purpose‑built ramp for scale approaches mitigates damage to scale edges and equipment, helping to preserve calibration stability and extending the service life of the weighing system. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN loading ramp with existing platform scales and to confirm compatibility with specific BFB systems Technical data SKU: BFS-A09N Manufacturer: KERN Material: Painted steel Dimensions: 1500×740×90 mm Weight: 69 kg Origin: CN Harmonised code: 84239010 Facts Platform compatibility: 1500×1500×85 mm Product group: Scale accessories Category: Accessories / Scales Special features Designed for BFB platform scale integration Surface: painted for corrosion resistance Intended use: loading approach for weighing platforms FAQ Is the ramp suitable for standard platform scales? The BFS-A09N is specified for models with a weighing plate size of 1500×1500×85 mm and is designed to match common platform scale geometries. What material and finish does the ramp use? The ramp is made from painted steel, offering a durable surface that tolerates workshop use and reduces maintenance needs. How heavy is the ramp and what does that mean for installation? The ramp weighs 69 kg; its mass provides stability during loading and typically allows straightforward placement by workshop staff or with basic handling equipment. Can the ramp be used with BFB systems? Yes, the design is intended for integration with BFB‑type platform scales to ensure correct approach geometry and reliable weighing operations. Metav Werkzeuge, Emmerich am Rhein, Germany · Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930