600kg Stainless Steel Platform Weighbridge 200g Readability, IP65 Silicone-Coated Aluminium Load Cell OIML R60 Class III - KERN

Take advantage of a robust, painted-steel ramp with clear dimensions and proven compatibility to streamline loading onto weighing platforms; order the KERN loading ramp directly via Metav Werkzeuge or request advice from our consultants. Loading ramp BFS-A01N – painted steel, 1000×740×90 mm (KERN) The Loading ramp BFS-A01N is a painted-steel loading aid designed to bridge floor level and BFB weighing platforms, enabling secure transfer of trolleys and equipment in workshops and industrial environments. Painted steel construction Dimensions 1000×740×90 mm Compatible with BFB weighing platforms Robust 45.2 kg mass Faster, safer loading for weighing platforms The ramp is engineered to reduce handling time and minimise the risk of misplacement when moving goods onto scales. With a painted steel construction and a clear footprint of 1000×740×90 mm, the unit provides a stable incline tailored to common workshop trolleys and pallet trucks. Compatibility with BFB weighing platforms (suitable for models with a weighing plate size of 1000×1000×85 mm) means the ramp integrates smoothly into existing metrology setups. This direct fit reduces process interruptions and supports consistent weighing procedures, improving throughput in routine weighing tasks. Built to withstand workshop conditions Durability is the principal benefit of the ramp’s design: the painted finish protects the steel surface against routine abrasion and makes cleaning straightforward, while the product’s robust construction delivers reliable stability during repeated loading cycles. The substantial mass contributes to positional stability on the floor, reducing the need for frequent realignment and lowering maintenance overheads. For operations where uptime and predictable performance matter, this loading aid offers a pragmatic balance of longevity and pragmatic upkeep. Simple integration into measurement workflows Installation is uncomplicated and does not require special tools; the ramp is a practical complement to standard scale platforms and workshop layouts. Designed as an accessory for weighing equipment, the unit supports organised workflows by providing a consistent approach angle and stable surface for moving loads onto the scale. The measured dimensions and solid build improve operator confidence during handling, contributing to safer processes and fewer weighing errors in daily use. For tailored advice on fitting the KERN loading ramp BFS-A01N to existing scales or to discuss compatibility with specific BFB platform models, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BFS-A01N Manufacturer: KERN SKU: BFS-A01N GTIN: 4045761180024 Country of origin: CN Material: Steel, painted Core data Dimensions (B×T×H): 1000×740×90 mm Weight: 45.2 kg Tariff number: 73269098 eClass: 22108608 Special features Accessory for weighing scales (Zubehör for Waagen) Suitable for models with weighing plate size 1000×1000×85 mm Painted steel surface Designed for workshop and industrial use FAQ Which weighing platforms does the ramp fit? The ramp fits BFB weighing platforms and is suitable for models with a weighing plate size of 1000×1000×85 mm; the KERN loading ramp BFS-A01N was designed for direct integration with these platforms. Can the ramp be used with pallet trucks and trolleys? Yes, the KERN BFS-A01N provides a stable incline and a sizable footprint to support pallet trucks and workshop trolleys during transfer onto scales. How robust is the ramp for daily workshop use? The painted-steel construction and substantial mass ensure the BFS-A01N resists routine wear and remains stable under frequent loading, offering reliable daily performance. What maintenance does the ramp require? Routine inspection and cleaning of the painted surface are sufficient to maintain the ramp’s condition; the finishing reduces visible wear and simplifies upkeep. Manufacturer: KERN · Origin: China · Supplier contact: Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271

Stability and straightforward compatibility ensure a durable, low-maintenance foundation for drive-on weighbridges; combine sturdy installation, precise dimensions and dependable supply from Metav Werkzeuge for uninterrupted workflow — order directly through Metav Werkzeuge or consult our specialists for compatibility advice. KERN BFS-A03N Pit Frame — stable pit frame with 1085×1085×80 mm footprint The BFS-A03N pit frame is a stable installation frame intended for drive-on weighbridge assemblies, designed to provide barrier-free access and a reliable base for workshop weighing applications. Stable pit frame for drive-on weighbridges Dimensions 1085×1085×80 mm frame Compatible with 1000×1000×80 mm weighing plates Not retrofittable to existing installations Built for stable, drive-on installations that save time and space The pit frame provides a stable foundation for floor-level weighing systems, ensuring a level, flush installation that permits barrier-free, drive-on access. By matching the frame to the indicated weighing plate size, the installation avoids misalignment and uneven loading that can compromise measurement accuracy. The specified 1085×1085×80 mm footprint creates an installation zone that accommodates the standard 1000×1000×80 mm weighing platform while keeping the overall profile compact for workshop environments. This mechanical fit reduces on-site adjustments and supports consistent weighing results across routine operations. Simplified integration and dependable performance in daily use Engineered for direct installation with compatible scale platforms, the frame reduces preparation time during new builds and minimises the need for complex civil works. The unit’s configuration supports straightforward anchoring and alignment, which in practice lowers installation labour and shortens commissioning time. At a weight of 27 kg, the assembly is manageable for workshop teams while still providing sufficient mass to hold the platform securely in place. The clear specification of dimensions and suitability for a matching weighing plate enables planners and technicians to plan foundations and workflows with confidence. Practical benefits that protect measurement quality and workflow A purpose-built pit frame prevents edge deformation and uneven load transfer that can occur when a platform lacks a dedicated support structure. The result is more reliable readings over time and reduced risk of damage to the weighing plate under repeated vehicle or equipment movements. Because the frame is not retrofittable, purchasers receive a product intended for new installations where full compatibility and optimal performance can be ensured. This direct approach supports long-term measurement stability and reduces the incidence of service interventions, aligning with efficient workshop operation. Contact Metav Werkzeuge in Emmerich for technical matching and procurement: email info@metav-werkzeuge.com or phone +49 2822 7131930 to discuss installation requirements and confirm compatibility with your weighing system Technical Data SKU: BFS-A03N Manufacturer: KERN GTIN: 4045761180048 Country of origin: CN Commodity code: 84239010 ECLASS: 35011090 Numbers / Facts Frame dimensions: 1085×1085×80 mm Compatible weighing plate size: 1000×1000×80 mm Weight: 27 kg Special features / Versions Stable pit frame for installation of a weighbridge Enables barrier-free drive-on access Not retrofittable to existing platforms FAQ Is this pit frame suitable for drive-on vehicle scales? The pit frame is designed to provide a stable, floor-level installation for drive-on weighbridges and is suitable where the weighing plate dimensions match the listed size. Which weighing plate size is compatible with the frame? Compatibility is specified for a weighing plate of 1000×1000×80 mm; the frame accommodates that plate size to ensure correct load transfer and alignment. Can the frame be retrofitted to an existing weighbridge? No, the frame is not retrofittable and is intended for new installations where complete compatibility and installation planning are applied. What is the weight of the frame for handling and installation planning? The frame has a weight of 27 kg, allowing workshop teams to manage handling while providing a stable mass for secure platform support. Who supplies and ships the frame? The frame is supplied by KERN and distributed through Metav Werkzeuge; Metav handles order processing and logistics from its Emmerich location. Manufacturer: KERN · Country of origin: CN · For sales and technical enquiries: info@metav-werkzeuge.com, +49 2822 7131930

Stable anchoring for precise weighing: the accessory secures the weighing bridge to the floor, compatible with common bridge plate footprints and designed for rapid installation; order the pair of base plates directly via Metav Werkzeuge or consult our specialists for application advice. Pair of base plates for BFB — floor anchor for weighing bridge, KERN Pair of base plates for stable fixation of a weighing bridge in industrial and workshop environments Pair of base plates for floor anchoring Compatible with plate sizes up to 1500x1500x85mm Quick fixation of weighing bridge to floor Lightweight design, total weight 0.74 kg Secure foundation for repeatable weighing results A reliable weighing process depends on mechanical stability. The pair of base plates provides a defined interface between the scale and the floor, reducing micro-movements that can cause measurement scatter. Designed for use with stationary platforms, the accessory improves repeatability by stabilising the load path of the weighing bridge. Compatibility with footprints from 1000×1000×85 mm up to 1500×1500×85 mm ensures the anchoring solution matches common industrial bridge sizes, helping to maintain consistent results across shifts and operators. Fast fitting that minimises downtime Installation is straightforward and engineered for workshop efficiency. The base-plate pair (BFS-A06N) features a compact form and lightweight total mass (0.74 kg), allowing quicker positioning and bolting with standard toolsets. Because the plates are intended solely for mechanical fixation, they do not alter the metrological behaviour of the scale and so support existing calibration intervals. The result is reduced installation time, minimal production interruption and straightforward retrofitting into established weighing set-ups. Integrates with professional procurement and operations Supplied as an accessory for KERN systems, these mounting plates fit into an organised spare-part strategy and simplify inventory management for maintenance teams. Availability through Metav supports reliable supply from a European stock point, reducing lead times and smoothing workshop logistics. Where consistent throughput and predictable maintenance are priorities, the plates serve as a small but effective component of a controlled weighing workflow. For direct procurement or technical clarification on the KERN BFS-A06N pair of base plates contact Metav Werkzeuge—order via Metav or request tailored advice from our Emmerich-based team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BFS-A06N Manufacturer: KERN GTIN: 4045761180062 Country of origin: CN Facts Weight: 0.74 kg Suitable for plate sizes: 1000×1000×85 mm, 1500×1250×85 mm, 1500×1500×85 mm ECLASS: 21130190 Tariff code: 84239010 Special features Application: Fixation of weighing bridge to floor Compatible with BFB systems Matching accessory for KERN weighing bridges Packaged for workshop logistics FAQ What is the primary function of the pair of base plates? The pair of base plates (BFS-A06N) secures the weighing bridge to the floor, providing a defined mechanical interface that reduces movement and improves repeatability. Which bridge sizes are compatible with these base plates? Compatibility covers bridge plate footprints of 1000×1000×85 mm, 1500×1250×85 mm and 1500×1500×85 mm as specified for the accessory. What is the weight of the KERN BFS-A06N accessory? The total weight for the base-plate pair is 0.74 kg. Is the material specified for the base plates? Material details are not specified in the product data; refer to the KERN product documentation for construction specifics if required. Where is this accessory manufactured? The KERN base-plate pair BFS-A06N is listed with country of origin CN (China). KERN, Country of origin: CN