KGMN 400-02 Indexable Insert for Aluminium - MetavCUT

Benefit from the combination of sturdy 32 mm blade height, a slim 3.45 mm cutting width and a 36 mm maximum clamping depth to maintain consistent, repeatable parting cycles on production lathes. Order the KL36TM parting blade directly via Metav Werkzeuge or ask our consultants if needed. KL36TM Parting Blade — Teknik Makina, 32 mm height · 25 mm cutting height The KL36TM parting blade is a lathe parting tool blade engineered for precision grooving and secure parting operations, designed to accept Korloy KGMN 400-style inserts and to fit standard clamp holders with up to 36 mm engagement. 32 mm blade height for deep parting 25 mm effective cutting height 3.45 mm blade width for narrow grooves Compatible with Korloy KGMN 400 inserts Engineered for consistent parting performance The KL36TM is built around a clear dimensional specification that prioritises rigidity and repeatability in turning operations. With a blade height of 32 mm and an effective cutting height of 25 mm, the component offers sufficient cross-section to resist deflection during cut-off and grooving tasks, while the 150 mm overall length provides the reach required for many chuck-mounted setups. The 3.45 mm blade width helps to reduce material loss and minimise cycle times for narrow parting lines; this geometry translates into stable chip formation and reliable seating in the clamp holder, which supports smoother cycle-to-cycle repeatability. Precision compatibility to streamline tooling setups Compatibility with established insert geometries is a decisive efficiency factor in modern workshops. The KL36TM accepts KGMN 400 insert formats and is specified for use with Korloy-type inserts, enabling straightforward integration into existing tooling inventories and reducing changeover complexity. The clamp interface allows a maximum cutting depth of 36 mm in suitable holders, so the blade adapts to common parting and grooving depths without bespoke fixtures. Standardised insert use and clear dimensional data reduce setup time and support predictable tool life, delivering measurable gains in machining throughput. Workshop integration and supply reliability Sourcing and logistics are part of overall process efficiency. Stocked and distributed via Metav Werkzeuge, this parting blade benefits from a European supply hub that acts as a quality filter for industrial buyers. The availability of documented dimensions and insert compatibility simplifies procurement and storekeeping, while Metav's established distribution ensures consistent delivery to the workbench. This configuration suits production and maintenance departments that require dependable, repeatable tooling components without prolonged lead times. Contact Metav Werkzeuge in Emmerich for procurement and technical clarification on the KL36TM parting blade — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and order options Technical data Article number: KL36TM Manufacturer: Teknik Makina Product: Parting blade (lathe) Facts Blade height: 32 mm Cutting height: 25 mm Blade width: 3.45 mm Overall length: 150 mm Max clamping/cutting depth in holder: 36 mm Special features Compatible inserts: KGMN 400 Suitable insert manufacturer: Korloy Designed for clamp holders with 36 mm engagement FAQ Which inserts fit the KL36TM parting blade? The KL36TM parting blade is specified for KGMN 400 inserts and matches Korloy-style geometry for straightforward mounting and replacement. What maximum cutting depth does the blade support in a holder? The parting blade supports a maximum clamping/cutting depth of 36 mm when used with an appropriate clamp holder. Is the KL36TM suitable for narrow groove parting? Yes, the KL36TM’s 3.45 mm blade width is intended for narrow groove and precision parting applications where reduced kerf is required. Where can this parting blade be sourced for production use? Stock and distribution are handled via Metav Werkzeuge; Metav supplies the KL36TM and can advise on holder compatibility and logistics. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of precise cutting geometry, a 26 mm blade height and a 36 mm maximum cutting depth for consistent parting results; secure clamping and compatibility with KGMN 400 inserts ensure reliable production. Order the parting blade directly via Metav Werkzeuge or consult our advisors for tailored selection. KL39TM parting blade – parting tool blade with 26 mm blade height and 36 mm max cutting depth (Teknik Cutting Tools) The KL39TM parting blade is a compact, high-rigidity parting tool blade designed for clean cut-off operations in turning applications and intended for use with KGMN 400 indexable inserts 26 mm blade height for deep cuts 36 mm maximum cutting depth Compatible with KGMN 400 inserts 110 mm overall length for secure mounting Precision cut-off performance for stable production The KL39TM delivers consistent cutting results through a combination of robust geometry and clearly defined dimensions. With a 26 mm blade height and a 21.4 mm cutting height, the design provides a stable cutting edge position that reduces deflection during parting operations. The compatibility with KGMN 400 indexable inserts enables quick insert changes and predictable tool behaviour; this reduces cycle-time variability and supports tight process control in series production. The result is a higher first-pass yield and fewer interrupted setups, which improves throughput on the shop floor. Rigidity and secure clamping reduce vibration and tool wear A narrow blade width of 3.45 mm together with the 110 mm overall length yields a stiff, well-supported tool that resists chatter when correctly mounted. The clamp allowance — a maximum stepover depth of 36 mm in the clamp — offers flexibility for deeper parting jobs while maintaining secure clamping. Reduced vibration translates into longer insert life and improved surface finish on workpieces. For operations that require repeatable quality, the combination of a slim, rigid blade and controlled clamping produces measurable gains in tool life and component consistency. Simple integration with Korloy-compatible inserts and standard holders The KL39TM is specified for use with KGMN 400 inserts and is compatible with inserts from Korloy, enabling straightforward procurement and stocking strategies. The indexable-insert approach allows inserts to be rotated or replaced quickly without replacing the entire blade, which supports rapid changeover and lower consumable costs over time. Given its defined dimensions and insert compatibility, the blade integrates easily into existing parting holders and machining sequences, making it suitable for both single-machine shops and larger turning centres seeking dependable parting solutions. Contact Metav Werkzeuge for expert advice on Teknik Cutting Tools parting blades such as the KL39TM and to confirm availability from our Emmerich stock Technical data Article number: KL39TM Manufacturer: Teknik Makina ECLASS: 21181018 Compatible insert manufacturer: Korloy Compatible insert: KGMN 400 Core dimensions Blade height: 26 mm Cutting height: 21.4 mm Blade width: 3.45 mm Overall length: 110 mm Max cutting depth in clamp: 36 mm Features Designed for KGMN 400 indexable inserts Suitable for Korloy-manufactured inserts Intended for parting / cut-off applications Clamp-compatible with up to 36 mm depth FAQ Which inserts fit this parting blade? The parting blade is specified for KGMN 400 indexable inserts and is listed as compatible with Korloy-manufactured inserts for straightforward replacement. What is the maximum cutting depth achievable in the clamp? The clamp allows a maximum cutting depth of 36 mm, enabling deeper parting operations while maintaining a secure hold. How narrow is the blade and why does that matter? The blade width is 3.45 mm; a narrower blade reduces material waste and helps maintain rigidity, which improves surface finish and reduces vibration. Can the blade be used on standard parting holders? The dimensions (110 mm overall length and the specified blade height) are intended to integrate with common clamp-style holders used in turning; compatibility should be checked against holder dimensions before fitting. Who supplies this product and where can it be ordered? This parting blade is supplied by Teknik Cutting Tools (Teknik Makina) and is available through Metav Werkzeuge; the SKU is KL39TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com