16-20mm Cartridge for Boring Tool WCMX 0302 - Teknik Makina

Benefit from precise internal turning with a robust indexable-insert boring tool offering a 16 mm shank and 52 mm cutting length for stable machining; order directly via Metav Werkzeuge or consult our specialists for application advice. Boring tool TKB088TM — 16 mm shank, compatible with WCMX 0302 inserts (Teknik Makina) the boring tool TKB088TM provides a compact, rigid solution for internal turning tasks in production and workshop environments 16 mm shank diameter 52 mm cutting length Compatible with WCMX 0302 inserts 100 mm overall length Rigidity and repeatability for internal machining The design focuses on stability and predictable performance. A 16 mm shank diameter reduces deflection during cuts, while the 52 mm cutting length keeps the centre of cutting forces close to the holder, which improves dimensional repeatability. Where indexable inserts are used, a secure seat and simple clamp mechanism mean fast insert changes and consistent tool geometry; this reduces downtime and contributes to a steady production rhythm. The relatively lightweight construction at 0.176 kg also simplifies handling during tool changes without compromising stiffness. Clear compatibility and practical handling This boring bar is specified for use with WCMX 0302 indexable inserts, which are widely available and easy to fit. The compatibility with standard insert formats enables cost-effective reconditioning of the cutting edge and straightforward inventory management. The tool’s 100 mm overall length and measured dimensions suit many internal turning setups on lathes and CNC turning centres; the maximum cutting diameter of 20 mm defines the working envelope and helps with machine setup and cycle planning. Technical users will appreciate the concise, measurable values that support reliable process planning. How the tool supports workshop productivity By combining a compact form with standard insert compatibility, this boring bar helps maintain cycle times and tool life across batch runs. The indexable-insert system lowers total machining cost by separating the cutting edge from the tool body, while the defined shank and cutting lengths ease repeatable clamping and calibration in toolholders. For procurement and production departments, the tool offers straightforward specification: clear numerical data enables quick comparison and integration into existing tool assortments, supporting efficient workshop logistics and consistent results on steel and similar turning applications. For application-specific advice or to secure supply from our Emmerich location, contact Metav Werkzeuge for expert guidance on using the 16 mm shank boring tool TKB088TM Technical data Article number: TKB088TM Manufacturer: Teknik Makina Designation: Ausbohrwerkzeug (boring tool) Facts Shank diameter: 16 mm Cutting length: 52 mm Maximum cutting diameter: 20 mm Overall length: 100 mm Weight: 0.176 kg Special features Compatible inserts: WCMX 0302 Indexable-insert concept Compact, rigid construction FAQ What insert types fit this boring bar? The boring tool TKB088TM is specified for WCMX 0302 indexable inserts, ensuring compatibility with widely available insert stocks. What is the effective cutting length of the tool? The tool provides a 52 mm cutting length, which determines the depth of internal machining and helps when planning tool reach and clearances. Which shank diameter is required for the toolholder? A 16 mm shank diameter is required; the shank size delivers the rigidity necessary for stable internal turning. What is the maximum bore diameter this tool can machine? The stated maximum cutting diameter is 20 mm, defining the recommended working range for internal turning operations. Is the tool suitable for automated insert changes? The indexable-insert design of the TKB088TM supports rapid insert replacement and repeatable clamping, which is compatible with standard workshop procedures for efficient changeover. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of compact dimensions, high rigidity and insert compatibility for reliable internal boring operations; order the tool via Metav Werkzeuge or consult our specialists for application advice. TKB090TM Internal boring bar — 16 mm shank, for WCMX 0302 inserts (Teknik Cutting Tools) The TKB090TM is a precision internal boring bar designed for medium-depth bores in turning and milling centres, combining a compact 16 mm shank with indexable-insert compatibility for efficient, repeatable machining. Solid 16 mm shank for rigid clamping Compatible with WCMX 0302 indexable inserts 102 mm effective cutting length for deep bores Increased productivity through predictable geometry and compatible inserts The tool holder delivers a clear performance edge by pairing a 16 mm shank with a maximum workable cutting diameter of 20 mm, ensuring consistent engagement in confined internal bores. The combination of a compact profile and 102 mm cutting length permits access to deeper cavities while preserving clamping stability. Predictable geometry reduces setup time and scrap rates, so cycle times can be shortened without sacrificing surface quality or concentricity. The modest mass of 0.237 kg contributes to lower centrifugal stress at higher spindle speeds, improving tool life and process stability. Cost-efficient machining with indexable inserts and straightforward maintenance Designed for use with WCMX 0302 indexable inserts, the bar enables rapid insert changes and economical reconditioning compared with solid-cartridge cutters. Indexable inserts mean less downtime for re‑grinding and a lower per‑cutting-edge cost, a practical advantage in batch production. The holder’s plain-interface design simplifies insert seating and torqueing, improving repeatability of edge positioning and reducing the need for frequent adjustments. This approach supports both small workshops and production lines that require sensible total cost of ownership and easy shopfloor handling. Practical applications, compatibility and workshop benefits Ideal for internal finishing and semi‑rough boring tasks on lathes and machining centres, the bar suits operations where space is limited but precision remains essential. The overall length of 150 mm and the effective cutting reach support a wide range of component geometries while the rigid shank aids vibration damping for improved surface finish. As a specialist tool for metalworking professionals, the design focuses on reliable clamping, simple insert availability and minimal maintenance intervals — all factors that contribute to steady production throughput and fewer unscheduled interruptions. For application recommendations or to secure reliable supply from Emmerich, contact Metav Werkzeuge for the Teknik Cutting Tools TKB090TM — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKB090TM Manufacturer: Teknik Makina Product type: Internal boring bar Facts Maximum cutting diameter: 20 mm Shank diameter: 16 mm Effective cutting length: 102 mm Overall length: 150 mm Weight: 0.237 kg Special features Compatible with WCMX 0302 indexable inserts Suitable for internal boring applications SKU: TKB090TM Supplier line: Teknik Cutting Tools FAQ What insert type fits this boring bar? The bar accepts WCMX 0302 indexable inserts as specified for the Teknik Cutting Tools TKB090TM, enabling quick edge changes. What is the maximum bore diameter achievable? The holder is specified for a maximum cutting diameter of 20 mm, suitable for medium-size internal bores. Which shank size is required for proper clamping? A 16 mm shank provides rigid clamping and compatibility with standard collets and toolholders on small to mid-size machines. How deep can the tool reach reliably? With an effective cutting length of 102 mm and an overall length of 150 mm, the TKB090TM is intended for deeper internal bores while maintaining stability. Is this tool suitable for high‑speed machining? The low mass and compact geometry support stable performance at elevated spindle speeds; final suitability will depend on machine capability and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise internal machining with an indexable boring solution that combines a 16 mm shank and a maximum cutting diameter of 20 mm for reliable, repeatable results; order directly via Metav Werkzeuge or consult the team for application advice. Boring Bar TKB092TM — Indexable internal boring bar, 16 mm shank, Ø up to 20 mm (Teknik Makina) The Boring Bar TKB092TM is an indexable internal cutting tool designed for precision bore enlarging and finishing in CNC turning and lathe operations *Indexable for WCMX 0302 inserts *16 mm shank diameter *Cutting diameter up to 20 mm *152 mm effective cutting length Accurate internal finishing with indexable inserts The TKB092TM delivers controlled internal cutting by using widely available WCMX 0302 indexable inserts, which simplify tool setup and spare-part logistics. The combination of an exchangeable insert system and a solid tool body reduces downtime: when an insert is worn, replacement is fast and repeatability is restored immediately. This approach lowers overall machining cost per bore while maintaining consistent surface quality and diameter tolerance in series production. Rigidity and chip control for stable performance A 16 mm shank and a 152 mm cutting length provide a balance between accessibility and rigidity to reduce vibration during machining. The tool geometry supports predictable chip evacuation when used with the recommended insert type, which improves tool life and keeps cycle times steady. Specifying suitable clamping and minimising overhang enhances stability, leading to fewer reworks and more reliable batch throughput for production workshops. Simple integration into existing turning workflows Compatibility with WCMX 0302 inserts makes the tool straightforward to integrate into standard toolholders and changeover procedures. The bar’s overall length of 200 mm keeps reach adequate for common internal operations while remaining compatible with typical turret clearances. Choosing this indexable solution reduces inventory complexity compared with full solid-tool options and streamlines maintenance routines for shop-floor teams. Practical applications and productivity gains Optimised for internal boring and light finishing passes, the bar is suited to applications in general engineering, automotive subassemblies and any production requiring precise internal diameters up to 20 mm. The indexable system enables rapid adaptation between roughing and finishing by altering insert grades or geometries, delivering measurable cycle-time savings and consistent part quality across runs. Contact Metav Werkzeuge for tailored advice on deploying the Teknik Cutting Tools boring bar TKB092TM and to confirm stock availability from the Emmerich warehouse Technical Data Article number: TKB092TM Manufacturer: Teknik Makina Facts Cutting diameter max: 20 mm Shank diameter: 16 mm Cutting length (shaft cutting length): 152 mm Overall length: 200 mm Weight: 0.362 kg Special features Indexable boring bar design Compatible with WCMX 0302 inserts Intended for CNC turning/lathe internal operations FAQ What maximum bore diameter can be machined with this bar? The TKB092TM machines up to a 20 mm cutting diameter when fitted with the correct insert geometry and held with adequate rigidity. Which insert type is specified for the tool? Compatibility is provided for WCMX 0302 indexable inserts; the TKB092TM is designed to use this standard for easy replacement and a wide choice of grades. What shank diameter and reach does the bar offer? The boring bar has a 16 mm shank and a total length of 200 mm with a 152 mm effective cutting length, balancing reach and stiffness for internal operations. Is the tool suitable for finishing passes? Yes, the indexable configuration and available insert grades allow the TKB092TM to perform light finishing passes with consistent surface results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable-insert boring tool that combines compatibility with WCMX and CCMT inserts, a secure M8 mount and a short overall length for easy set-up and repeatable internal machining. Order directly via Metav Werkzeuge or consult the Metav specialists for application support and fast delivery. Boring tool TKB170TM — Indexable-insert bar for WCMX & CCMT, ø 16–20 mm (Teknik Makina) The boring tool TKB170TM is a compact indexable-insert holder designed for internal turning with WCMX 0302 and CCMT inserts, optimised for bore diameters in the 16–20 mm range. Compatible with WCMX 0302 and CCMT inserts Diameter range 16–20 mm M8 threaded mount for secure clamping Compact overall length 66 mm, lightweight 0.078 kg Precision where space is limited With a focus on efficient internal machining, this bar’s diameter range (16–20 mm) and compact overall length (66 mm) enable precise work in restricted envelopes. The short construction reduces overhang during operations, which helps maintain concentricity and limits deflection when using indexable tips. For workshops aiming to keep cycle times low, the combination of a slim cutting profile and robust insert compatibility delivers a pragmatic balance between rigidity and accessibility in tight bores. Secure mounting and straightforward handling The M8 threaded connection provides a straightforward means of securing the tool into a holder or turret; the M8 interface supports repeatable clamping and quick replacement. The low mass of 0.078 kg reduces effort during changeover and minimises dynamic imbalance at moderate spindle speeds, while the simple mechanical mounting helps shorten set-up times. Technicians benefit from predictable positioning and reduced rework, which translates into stable part quality across batches. Broad insert compatibility to cut stock and complexity Accepting both WCMX 0302 and CCMT indexable inserts, the bar supports a range of chipformers and grades for facing, turning and light boring operations. This versatility reduces the need for multiple specialised holders and simplifies inventory: one holder can be paired with grades chosen for ferrous or non-ferrous workpieces. The result is fewer tool changes, lower stockholding and faster response to mixed production demands without sacrificing the consistency expected in precision machining. Practical choice for toolrooms and small-bore production Designed for use in toolrooms, maintenance workshops and smaller production cells, the assembly is aimed at operators who require dependable performance in internal machining tasks. Pairing the holder with the appropriate insert grade allows for finishing or semi-finishing passes depending on material and process parameters. If guidance is needed on selecting the correct insert geometry or grade for a specific component, Metav’s technical advisors can provide tailored recommendations and supply chain support from Emmerich. For specification help, spare-part queries or to place an order for the Teknik Makina TKB170TM, contact Metav Werkzeuge for personalised advice and prompt dispatch from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: TKB170TM SKU: TKB170TM Manufacturer: Teknik Makina ECLASS: 21181208 Core dimensions Diameter range: 16–20 mm Thread: M8 Overall length: 66 mm Weight: 0.078 kg Compatibility & features Compatible with WCMX 0302 indexable inserts Suitable for CCMT indexable inserts Intended for internal boring and finishing tasks Files: 62de7eefbd24461b3d5f7a86, 62de7e61148ec6b71020ff92 FAQ Is the holder compatible with CCMT inserts? The Teknik Makina TKB170TM supports both WCMX 0302 and CCMT indexable inserts, allowing choice of grade and chipbreaker for the specific application. What bore sizes can be machined with this tool? This bar is specified for a diameter range of 16–20 mm, making it suitable for small-bore internal machining. What is the mounting thread and overall length? The tool features an M8 threaded mount and an overall length of 66 mm. How heavy is the bar and what are the handling benefits? The assembly weighs 0.078 kg, which simplifies handling and reduces inertia for quicker changeovers. Can this holder be used for finishing operations? When paired with the correct insert grade and geometry, the TKB170TM can be used for light finishing passes in small bores; Metav can advise on the optimal insert choice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com