28mm Cartridge for Boring Tool 28-38 CCMT 09T3, Precision - Teknik Makina

Take advantage of a compact, indexable solution that combines reliable clamp stability and easy insert changes for fast, repeatable internal machining. The tool’s 20 mm shank and 55 mm effective cutting length deliver improved rigidity and consistent finishes while the CCMT insert interface keeps tooling costs low — order the boring bar directly via Metav Werkzeuge or consult our specialists for application advice. TKB106TM boring bar — indexable internal boring tool with CCMT interface (Teknik Makina) The TKB106TM boring bar is designed for precision internal machining in workshop and production environments, accepting CCMT 09T3 indexable inserts for adaptable finishing and roughing operations Indexable insert holder for CCMT 09T3 20 mm shank for secure toolholder clamping 55 mm effective cutting length Suitable for bores up to 38 mm diameter Greater cutting stability through a compact, precision shank The bar’s 20 mm shank and balanced mass (0.378 kg) increase rigidity at the holder, which reduces vibration and improves concentricity during internal turning. A firmer support in the toolpost translates directly into more consistent bore diameters and longer insert life. For workshops seeking repeatable results, this means fewer reworks and more predictable cycle times — the result of combining a well-dimensioned shank with a compact overall length. Efficient insert system that lowers operating costs Equipped to accept CCMT 09T3 indexable inserts, the boring bar enables quick insert replacement without regrinding, cutting downtime and consumable costs. CCMT inserts are a widely used grade for finishing and semi-finishing; using them allows an operator to restore cutting performance in minutes. This modular approach delivers a clear economic benefit on production runs where frequent edge restoration would otherwise interrupt throughput. Effective cutting reach with controlled overhang for precision bores The 55 mm effective cutting length and total length of 105 mm balance reach and stiffness, supporting machining of medium-deep bores while limiting overhang-related deflection. With a maximum cutting diameter parameter indicating suitability up to 38 mm, the bar fits common internal turning tasks across automotive, hydraulic and general engineering components. The design focuses on delivering predictable tool behaviour so that setup times are reduced and process stability is improved. Choose Teknik Cutting Tools’ TKB106TM via Metav Werkzeuge for dependable internal machining — contact Metav Werkzeuge for tailored application support and ordering guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKB106TM Manufacturer: Teknik Makina Designation: Ausbohrwerkzeug Facts Cutting diameter max: 38 mm Shank diameter: 20 mm Effective cutting length: 55 mm Overall length: 105 mm Weight: 0.378 kg Compatible insert: CCMT 09T3 Special features Indexable insert interface CCMT 09T3 Compact construction for improved rigidity Nominal diameter reference: 28 Suitable for precision internal machining FAQ What insert type does the boring bar use? The boring bar accepts CCMT 09T3 indexable inserts, allowing fast edge changes and adaptable grades for finishing or semi-finishing. Which bore diameters are suitable for this tool? The bar is configured for internal bores up to 38 mm cutting diameter and is particularly effective where a moderate reach is required. How does the 20 mm shank affect machining performance? A 20 mm shank provides a secure clamp fit and improved rigidity, which reduces vibration and contributes to more consistent bore accuracy. Is the cutting length sufficient for medium-deep bores? With a 55 mm effective cutting length and 105 mm overall length, the tool offers a practical balance between reach and stiffness for many workshop applications. Can the bar be used for both finishing and roughing passes? Yes — paired with appropriate CCMT insert grades, the bar is suitable for semi-finishing and finishing operations where insert geometry and grade are selected to match the application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust indexable design, a rigid 20 mm shank and a 105 mm effective cutting length for consistent internal bores; order the TKB108TM boring tool directly via Metav Werkzeuge or ask the advisors for tailored cutting data. TKB108TM Boring tool – for CCMT 09T3 inserts, Ø 28 mm (Teknik Makina) The TKB108TM boring tool is a compact internal boring bar designed for precision internal turning with indexable inserts, ideal for integration into CNC lathe and boring operations. Solid indexable design for CCMT 09T3 Ø 28 mm cutting capability 20 mm shank for high rigidity 105 mm effective cutting length Precision bores with stable geometry The TKB108TM is engineered to deliver repeatable bore accuracy by pairing a rigid tool body with standard indexable inserts. Compatibility with CCMT 09T3 inserts allows controlled cutting-edge replacement without full regrinding, reducing setup variability. The tool’s 20 mm shank and optimised mass distribution increase stiffness at the cutting edge, which helps to limit vibration and to preserve the intended bore diameter over longer runs. For manufacturers seeking predictable part-to-part consistency, this configuration translates into fewer reworked components and less inspection overhead. More parts per shift through efficient tool life Designed around replaceable inserts rather than solid tooling, this boring bar targets reduced cycle time and lower operating cost per part. Using indexable inserts means worn cutting edges are swapped quickly, minimising machine downtime. The 105 mm effective cutting length provides enough reach for many internal operations while the compact overall length of 155 mm keeps overhang low — a key factor in extending insert life and maintaining surface finish. The modest mass (0.376 kg) also facilitates handling and fast tool changes in high-mix environments, supporting higher throughput without compromising stability. Straightforward fit into existing turning programmes Integration into established CNC turning and boring workflows is straightforward: the unit accepts standard ISO-style inserts and is intended for mounting where a stable, short overhang is required. The TKB108TM boring bar simplifies tooling lists by using widely available CCMT 09T3 inserts, enabling easy sourcing and replacement. For technicians with less experience of indexable systems, the concept of an indexable insert can be summarised as a replaceable cutting tip that provides the same geometry every time it is refitted — an immediate route to consistent surface finish and dimensional control. Where special cutting data or coating recommendations are needed, Metav Werkzeuge can advise on ideal insert grades and feeds for the specific component material. For a robust indexable solution from Teknik Makina, contact Metav Werkzeuge to specify the optimal insert grade and cutting parameters for the TKB108TM and ensure the tool matches the production requirements Technical data Article number: TKB108TM Manufacturer: Teknik Makina Product type: Boring tool for indexable inserts Facts Max cutting diameter: 38 mm Nominal cutting diameter: 28 mm Shank diameter: 20 mm Effective cutting length: 105 mm Overall length: 155 mm Weight: 0.376 kg Special features Compatible with CCMT 09T3 indexable inserts Indexable insert system for quick tip changes Short overhang for improved rigidity SKU: TKB108TM FAQ Which insert type is compatible with this boring tool? The TKB108TM boring tool is specified for use with CCMT 09T3 indexable inserts, which are standard ISO‑style turning tips used for internal boring and turning operations. What are the key dimensions to check for mounting? Important dimensions for mounting are the 20 mm shank diameter, the 105 mm effective cutting length and the overall length of 155 mm; these determine overhang and clearances in the toolpost. What is the maximum cutting diameter achievable? The tool data lists a maximum cutting diameter of 38 mm, while a nominal cutting diameter of 28 mm is indicated for typical setups, so the selected insert and holder geometry should be checked against the required bore size. Is the tool suitable for high-speed internal turning? The holder is designed for rigid mounting and indexable inserts; suitability for high-speed applications depends on the chosen insert grade and machine stability rather than the holder alone. How does the indexable design affect workshop efficiency? By using replaceable inserts such as CCMT 09T3, the TKB108TM reduces downtime for resharpening and simplifies inventory management, allowing faster tip replacement and consistent cutting geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise internal machining and reduced downtime thanks to a robust 25 mm shank and a long 174 mm cutting length that together ensure stable clamping and deep-bore capability. The tool accepts CCMT 09T3 indexable inserts for quick insert changes and consistent cutting performance. Order the boring tool directly via Metav Werkzeuge or ask our consultants for application advice. Boring tool TKB110TM — indexable insert bar with 25 mm shank, 174 mm cutting length (Teknik Cutting Tools) The TKB110TM boring tool is a purpose-built indexable insert bar for internal machining, designed for medium-depth bores using CCMT 09T3 inserts and offering a stable 25 mm shank for vibration-resistant operation 25 mm shank for stable clamping Accepts CCMT 09T3 indexable inserts 174 mm effective cutting length Ø up to 38 mm for internal bores Accurate internal machining with measurable stability The design of this indexable insert bar focuses on repeatable results in production. The 25 mm shank delivers secure clamping in standard toolholders, reducing chatter and improving surface finish. With an effective cutting length of 174 mm, the tool enables deeper passes without frequent repositioning, which increases throughput on serial jobs. The combination of a rigid shank and extended cutting reach translates into predictable dimensional control and shorter cycle times, a tangible efficiency gain for machining centres and toolrooms. Fast changeover and predictable cutting performance Acceptance of CCMT 09T3 indexable inserts means quick, tool-less insert swaps and consistent geometry from one tip to the next. This reduces non-productive time while maintaining cutting-edge quality. The tool’s compatibility with a widely used insert geometry supports easy sourcing of consumables and helps standardise tooling across a fleet of machines. For operations that prioritise uptime and reliable repeatability, the indexable system offers a pragmatic balance between performance and maintenance effort. Broad application range and process clarity With a maximum cutting diameter of Ø 38 mm and an overall length of 230 mm, the bar is suited for internal turning and finishing in a range of common materials where insert geometry CCMT is recommended. The 25 mm shaft diameter provides secure seating for mill-turn and lathe tool posts alike, enabling multi-axis setups where rigidity and accessibility are required. Where deeper internal features are necessary, the extended cutting length minimises the need for multiple tools or complex setups, simplifying programme logic and tool inventory. Practical benefits for procurement and production planning Lightweight at approximately 0.267 kg, the tool is easy to handle and fits into existing tool management routines without adding significant logistical burden. The modular insert approach reduces scrap from worn solid tools and allows predictable maintenance schedules based on insert life rather than whole-tool replacement. For purchasing teams and production planners, this translates into lower lifecycle costs and fewer interruptions — advantages that support continuous operation and easier stock management for consumables. For specialist advice on integrating the TKB110TM into a specific machining process or for guidance on compatible inserts and holders, contact Metav Werkzeuge for tailored recommendations and regional supply options Technical data Article number: TKB110TM Manufacturer: Teknik Cutting Tools Product type: Boring tool / indexable insert bar Suitable inserts: CCMT 09T3 Core data Maximum cutting diameter: 38 mm Shaft diameter: 25 mm Effective cutting length: 174 mm Overall length: 230 mm Weight: 0.267 kg Special features Indexable insert system Designed for internal machining Compatible with standard toolholders Lightweight construction for easy handling FAQ What applications suit this boring tool best? The TKB110TM boring tool by Teknik Cutting Tools is intended for internal turning and finishing where medium-depth bores up to Ø 38 mm are required, offering stable performance with CCMT 09T3 inserts. Which inserts are recommended for the TKB110TM? CCMT 09T3 indexable inserts are specified for the TKB110TM; using these inserts ensures correct geometry, secure seating and straightforward changeover. Is the shaft diameter compatible with standard holders? Yes. The 25 mm shaft diameter of the TKB110TM fits common toolholders and provides the stiffness needed for consistent internal machining. How long is the cutting reach and what does it mean for setup? The cutting length of 174 mm on the TKB110TM allows deeper access into bores, reducing the need for multiple tool changes and simplifying fixture and programme requirements. What are the handling and storage considerations? At around 0.267 kg, the TKB110TM is lightweight and convenient to handle; storing the bar with matched CCMT inserts helps maintain readiness and reduces setup time Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise deep-bore performance and robust shank stability: the tool combines a 38 mm maximum cutting diameter with a 274 mm cutting length for efficient machining of deep bores using economical indexable inserts. Order directly via Metav Werkzeuge or consult our specialists for application guidance. Boring Tool TKB111TM — long-reach indexable boring bar, 38 mm cutting diameter, Teknik Makina The Boring Tool TKB111TM is a long-reach indexable boring bar designed for accurate internal turning and boring on CNC lathes and medium-duty turning centres. 38 mm maximum cutting diameter 274 mm cutting length for deep bores Accepts CCMT 09T3 indexable inserts Improved productivity on deep bore operations The combination of a 38 mm cutting capacity and an extended 274 mm cutting length enables stable, efficient machining of deeper bores without frequent tool changes. The geometry is optimised for consistent chip control when used with CCMT 09T3 inserts, which keeps cycle times low and reduces downtime. This makes the bar a pragmatic choice where throughput and repeatability are priorities, delivering measurable improvements in machining time per component. Stable shank design for vibration reduction A 25 mm shank diameter and an overall length of 330 mm provide a balance between reach and rigidity. The robust shank reduces chatter and improves surface finish when cutting internal diameters, allowing trouble-free finishing passes. For operators adapting standard toolholders, the bar’s dimensions make it straightforward to fit into common adaptors while maintaining the head stiffness required for precision work in production environments. Cost-effective indexable solution with easy servicing Accepting CCMT 09T3 indexable inserts, the tool offers economical reconditioning: worn inserts can be rotated or replaced quickly, lowering total tooling costs compared with solid-carbide alternatives. The modular nature of indexable tooling also simplifies inventory management and shortens maintenance intervals. For workshops seeking a practical compromise between performance and operating cost, this bar provides a durable, service-friendly option from Teknik Makina. Contact Metav Werkzeuge for tailored technical advice or to arrange procurement details for the Teknik Makina TKB111TM — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data SKU: TKB111TM Manufacturer: Teknik Makina Product type: Boring tool ECLASS: 21181208 Files: 62de7eef0f56dbb4de4dbf60, 62de7e6333927e49dbf32755 Dimensions & core data Max cutting diameter: 38 mm Shank diameter: 25 mm Cutting length (shaft cutting): 274 mm Overall length: 330 mm Diameter: 28 mm Weight: 1.342 kg Materials & features Accepts CCMT 09T3 indexable inserts Long-reach design for internal boring Suitable for CNC lathe and medium-duty turning centres FAQ What type of inserts does this boring bar use? The boring bar accepts CCMT 09T3 indexable inserts, offering economical rotation and replacement for continuous production. Which machines is the bar suitable for? The bar is intended for CNC lathes and medium-duty turning centres where long-reach internal turning is required; its dimensions suit standard toolholders. How deep can the tool reach reliably? With a 274 mm cutting length and 330 mm overall length, it is optimised for deeper internal bores while maintaining stiffness. Is the shank compatible with common adaptors? The 25 mm shank diameter is compatible with usual adaptors and toolholders used in workshop and industrial settings. What are the main benefits of choosing this boring solution? The combination of extended reach, rigidity and use of CCMT 09T3 inserts reduces cycle time and tooling costs while simplifying maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Technical Data: Item: Boring Tool Brand: Teknik Makina Order Number: TKB176TM usable with CCMT 09T3 Indexable Inserts Diameter: 28-38mm Total length: 74.5mm Thread: M16 Weight: 0.213kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com