37-48 CCMT 09T3 Boring Tool Cartridge, Replacement Part - Teknik Makina

Take advantage of a robust indexable boring solution combining a compact 25 mm shank, a 64 mm cutting length and compatibility with CCMT 09T3 inserts to maintain production continuity and repeatable bore quality; order the boring tool directly via Metav Werkzeuge or ask our consultants if needed. Boring tool TKB112TM – Indexable internal boring bar, compatible with CCMT 09T3 Boring tool TKB112TM is engineered for precise internal machining and finishing operations where stable clamping and a long cutting reach are required Indexable CCMT 09T3 compatibility Ø 37 mm effective diameter 25 mm shank for secure clamping 64 mm cutting length for deep bores Stable internal boring for consistent bore results The TKB112TM is a purpose-built internal boring bar that combines a slender profile with measured rigidity to support accurate machining cycles. Its 25 mm shank is designed for secure fixture in standard toolholders, which reduces micro‑movement and helps preserve repeatability across batches. The tool’s geometry, tailored for CCMT 09T3 indexable inserts, permits rapid insert changes and consistent cutting edges, which shortens downtime and simplifies tool management in production environments. Extended reach for deeper bores with maintained stability With a 64 mm cutting length and an overall length of 120 mm, this boring bar offers an extended working reach while keeping the assembly compact and manageable. The combination of an effective diameter at Ø 37 mm and a cutting‑edge configuration suited to indexable inserts allows operators to perform pocketing and finishing operations in confined internal spaces without sacrificing surface integrity. The tool’s balance between reach and shaft dimension is optimised for machining tasks where access is limited but dimensional control remains critical. Practical handling and fast insert changeover to aid throughput Weighing approximately 0.661 kg, the bar provides a lightweight handling experience without compromising on structural support during cuts. Compatibility with the widely used CCMT 09T3 insert format ensures easy sourcing and predictable cutting behaviour, supporting faster changeovers and reduced tool inventory complexity. The indexable‑insert approach also separates cutting edge life from the tool body, lowering life‑cycle costs and simplifying maintenance procedures in the workshop. For fast, reliable supply and technical guidance on integrating the Teknik Makina TKB112TM boring tool into current tooling setups, contact Metav Werkzeuge in Emmerich via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: TKB112TM Manufacturer: Teknik Makina Facts Diameter: 37 mm Maximum cutting diameter: 48 mm Shank diameter: 25 mm Cutting length: 64 mm Overall length: 120 mm Weight: 0.661 kg Special features Compatibility with CCMT 09T3 indexable inserts Designed for internal boring and finishing Indexable insert concept for quick changeover FAQ What insert type does this boring bar use? The TKB112TM accepts CCMT 09T3 indexable inserts, enabling straightforward insert replacement and standardised cutting geometry. What are the key dimensions to check for machine compatibility? Relevant dimensions for fitting are the 25 mm shank diameter, overall length of 120 mm, and the effective diameter of 37 mm. Is the TKB112TM suitable for deep internal bores? The 64 mm cutting length and extended overall length make the bar suitable for deeper internal machining tasks while maintaining stability. How does the indexable insert system benefit production? Indexable inserts such as CCMT 09T3 allow rapid edge renewal, reduced tool downtime and simplified inventory, improving throughput and cost efficiency. Can the TKB112TM be used with standard toolholders? The 25 mm shank is sized for common clamping systems; verify toolholder bore dimensions and clamping capacity for secure fitting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable 25 mm shank, a 114 mm cutting length and CCMT 09T3 insert compatibility for reliable internal machining and reduced setup time. Order the (TKB114TM boring bar) directly via (Metav Werkzeuge) or ask our consultants if needed. Teknik Makina TKB114TM Boring Bar — Internal boring tool with CCMT 09T3 compatibility the TKB114TM boring bar is designed for accurate internal machining in production and workshop environments Compatible with CCMT 09T3 inserts Shank Ø25 mm for enhanced rigidity 114 mm cutting length for extended reach Overall length 170 mm for deep bore access Stable internal machining for consistent surface quality A robust shank diameter of 25 mm and a substantial 114 mm cutting length combine to deliver improved rigidity during internal operations. The design reduces vibration and deflection, which results in a more consistent surface finish and fewer rejected parts. By limiting tool movement under load, the holder supports repeatable bore geometry and steadier cycle times, which in turn lowers the need for downstream rework and improves process reliability in serial production. Faster cycles and lower downtime through insert compatibility Compatibility with CCMT 09T3 indexable inserts allows quick insert changes and straightforward re-grading of cutting edges, supporting rapid tool maintenance and minimal machine downtime. The tool’s 170 mm overall length provides the reach required for many internal bores while the balanced mass of 0.991 kg aids in handling and stability during mounting. Together, these attributes support productivity gains and pragmatic cost-efficiency by shortening changeover time and keeping machining operations moving. Practical handling and workshop integration The boring bar’s form factor is optimised for routine workshop workflows: a clearly defined shank diameter and standard insert interface simplify tool selection and inventory management. The holder fits established insert types, easing procurement and reducing the need for special tooling. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component arrives ready for integration on compatible tool posts and internal turning setups, backed by an experienced European supply chain. Confidence through trusted supply and service Sourcing via Metav Werkzeuge adds a pragmatic layer of assurance: long-standing distribution expertise, a large stocked range and central logistics from Emmerich support reliable replenishment and quality control. This combination of precise tooling and dependable supply reduces procurement risk and helps maintain continuous production—an advantage for workshops and small series manufacturers seeking affordable precision without compromise. For tailored advice on integrating the Teknik Makina TKB114TM into existing setups or to arrange supply from our Emmerich hub, contact Metav Werkzeuge by email or phone for a fast, expert response. Technical data Article number: TKB114TM Manufacturer: Teknik Makina Weight: 0.991 kg Shank diameter: 25 mm Cutting length: 114 mm Overall length: 170 mm Compatible inserts: CCMT 09T3 Max cutting diameter: 48 mm Numbers / Core technical data Shank Ø: 25 mm Cutting length: 114 mm Overall length: 170 mm Max cutting diameter: 48 mm Weight: 0.991 kg Special features / Versions Indexable insert interface CCMT 09T3 Designed as an internal boring bar Brand: Teknik Makina SKU: TKB114TM FAQ Which inserts fit this boring bar? The TKB114TM accepts CCMT 09T3 indexable inserts; this interface permits fast insert changes and use of standard grades. What reach does the holder provide for internal bores? With an overall length of 170 mm and a cutting length of 114 mm, the bar is suited to many medium-depth internal machining tasks. How does the TKB114TM improve stability during machining? The 25 mm shank diameter increases rigidity, reducing vibration and promoting consistent bore quality when the holder is correctly mounted. Is the TKB114TM available through Metav Werkzeuge? Yes; Teknik Makina tooling including the TKB114TM is supplied via Metav Werkzeuge and supported by their European logistics network. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable-insert boring bar that combines extended reach, stable shank dimensions and proven insert compatibility to keep internal turning operations precise and productive. Order directly via Metav Werkzeuge or consult the Metav team for application advice. Boring Bar TKB116TM — indexable-insert boring bar for CCMT 09T3, 204 mm cutting length (Teknik Makina) The Boring Bar TKB116TM is a purpose-built indexable-insert tool suited to internal boring and precision turning tasks where extended reach and reliable insert clamping are required. Extended 204 mm cutting length for deep bores Stable 25 mm shank reduces vibration and runout Compatible with CCMT 09T3 indexable inserts Practical overall length of 260 mm for machine clearance Consistent internal accuracy for repeatable components This boring bar is engineered to deliver stable cutting performance in series production. With a 25 mm shank diameter and a long 204 mm cutting length, the tool minimises deflection during deep internal cuts, which translates into improved roundness and surface finish. The use of indexable inserts reduces the variability inherent in solid-carbide solutions, as worn cutting edges can be replaced quickly, restoring cutting geometry without regrinding. Where process stability matters, this approach supports tighter tolerances and predictable cycle times. Productivity gains through quick insert changes and proven geometry Designed for fast maintenance, the bar accepts CCMT 09T3 inserts — a widely used grade and geometry that balances good chip control with durable cutting edges. The insert format enables straightforward seat location and clamping, shortening downtime for insert changes and reducing tooling logistics. The tool’s configuration supports efficient workshop workflows: fewer interruptions, fewer speciality grinding operations and consistent cutting-edge geometry that helps shops reach planned throughput targets sooner. Practical dimensions that suit most turning centres Measured dimensions support practical machine setup: an overall length of 260 mm and a cutting diameter range up to 48 mm provide the reach and clearance required for many internal operations. The listed diameter value of 37 mm indicates the tool’s working envelope, while the mass of 1.597 kg gives a tangible sense of its robustness. These numeric specifications make it straightforward to check spindle limits, holder compatibility and balance requirements before installation, so setups are completed with minimal iteration. Reliability and planning advantages for the workshop The bar’s design focuses on repeatable performance and minimised service intervention. Using standard indexable inserts reduces dependence on specialist regrinds and supports predictable inventory management for cutting edges. Combined with Metav’s logistics and quality filtering from Emmerich, the solution is intended to improve supply certainty and reduce the risk of production interruptions. For purchasers planning toolsets, the TKB116TM provides clear, measurable parameters for fixture design and process documentation. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina TKB116TM boring bar and to discuss stock availability and delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKB116TM Manufacturer: Teknik Makina Type: Boring bar (indexable-insert) Key measurements Maximum cutting diameter: 48 mm Nominal diameter: 37 mm Shaft diameter: 25 mm Cutting length: 204 mm Overall length: 260 mm Weight: 1.597 kg Materials & features Compatible inserts: CCMT 09T3 Indexable-insert system Files: 62de7e6333927e49dbf32755, 62de7eef0f56dbb4de4dbf60 FAQ What insert type does this bar require? The TKB116TM accepts CCMT 09T3 indexable inserts; this insert format is common for finishing and medium-cutting operations and allows quick edge replacement. What is the maximum recommended cutting diameter? The tool is specified for a maximum cutting diameter of 48 mm, with a nominal working diameter reference of 37 mm for standard setups. Which shank diameter is used for mounting? The bar has a 25 mm shank diameter, providing stiffness for deep internal cuts and compatibility with appropriately rated toolholders. How long is the cutting portion for deep boring? The cutting length is 204 mm, which is suitable for extended-reach internal machining without the need for custom extensions. Is the tool supplied with inserts? The product is supplied as an indexable-insert boring bar; inserts are not listed as included in the supplied data and should be ordered separately according to workshop requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com