70mm Cartridge for Boring Tool 70-90 CCMT 09T3 - Teknik Makina

Take advantage of a rigid, insert-based solution that combines interchangeability and reach: the modular design with CCMT 09T3 compatibility reduces tooling changeover and improves process uptime, while the 32 mm shank and 145 mm overall length ensure stable operation in medium-depth bores. Order the tool directly via Metav Werkzeuge or ask their consultants for specification support. Boring bar TKB130TM — indexable insert boring tool with 32 mm shank and Ø 90 mm capability (Teknik Makina) A Boring bar TKB130TM engineered for precision internal boring using CCMT 09T3 indexable inserts, suitable for workshop and CNC setups requiring modular tooling and repeatable results Suitable for CCMT 09T3 inserts Max cutting diameter 90 mm Shank diameter 32 mm Overall length 145 mm Consistent results from an indexable insert system The TKB130TM delivers repeatable bore geometry by using indexable inserts compatible with CCMT 09T3, allowing worn edges to be rotated or replaced without regrinding the bar. The modular insert approach lowers per-hole tooling cost and shortens downtime compared with solid cutters. With a max cutting diameter 90 mm and a retained, rigid mounting, the tool supports stable cutting conditions that translate into consistent bore finish and dimensional conformity on production runs. Reach and rigidity for medium-depth bores Designed with an 85 mm cutting length and 145 mm overall length, this boring bar provides the reach necessary for deeper internal features while keeping tool overhang moderate to limit chatter. The shank diameter 32 mm contributes to torsional stiffness, and the unit mass of 2.1 kg aids vibration damping during interrupted cuts. These dimensional parameters are intended to support reliable set-up on standard toolholders and ensure the machining geometry remains predictable across cycles. Practical economy and easy maintenance Compatibility with standard CCMT inserts means consumables are widely available and inexpensive to replace, reducing total cost of ownership. The insert seat and clamping concept permit quick changeovers, simplifying maintenance routines and helping to maintain production cadence. Specification choices for insert grade determine the best material applications, so the insert selection is a key variable in optimising performance for specific jobs. Support and integration into the workshop Metav's distribution and technical advisory services act as a quality filter for European customers: the product is supplied via a partner network that combines stocking capability with application guidance. For complex setups or to verify insert grades and cutting data, Metav Werkzeuge's advisors can provide tailored recommendations and ensure a smooth integration of the boring bar into existing CNC workflows. Contact Metav Werkzeuge for a tailored tooling recommendation and a quote for the Teknik Cutting Tools boring bar TKB130TM; Metav Werkzeuge GmbH can advise on insert selection, holder compatibility and setup — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TKB130TM Manufacturer: Teknik Makina Designation: Ausbohrwerkzeug Facts Max cutting diameter: 90 mm Nominal diameter: 70 mm Shank diameter: 32 mm Cutting length: 85 mm Overall length: 145 mm Weight: 2.1 kg Special features Compatible with CCMT 09T3 indexable inserts Indexable insert mounting for fast changeover Robust shank for reduced vibration Files: 62de7e6333927e49dbf32755, 62de7eef0f56dbb4de4dbf60 FAQ Which insert type fits the boring bar? The boring bar accepts CCMT 09T3 indexable inserts; insert geometry and grade should be chosen according to the workpiece material and machining strategy. What is the maximum bore diameter achievable? The tool supports a max cutting diameter of 90 mm, as specified for the TKB130TM. What are the key dimensions for holder compatibility? Shank diameter is 32 mm and overall length is 145 mm, which are typical values to verify against a clamping holder or boring head. How long is the effective cutting reach? The cutting or insert engagement length is 85 mm, providing sufficient reach for medium-depth internal features while controlling overhang. Is the tool suitable for CNC setups and quick insert changes? Yes; the TKB130TM is designed for CNC integration and uses indexable inserts for rapid replacement, reducing machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 32 mm solid shank, compatibility with CCMT 09T3 indexable inserts and a 90 mm max cutting diameter for stable, repeatable internal bores. Order the internal boring tool directly via Metav Werkzeuge or ask the Metav consultants for application advice. Internal boring tool TKB132TM – CCMT 09T3 interface, Ø90 mm max cutting diameter (Teknik Makina) The Internal boring tool delivers a robust solution for precision internal machining in CNC lathes and turning centres, engineered for compatibility with CCMT 09T3 indexable inserts. For CCMT 09T3 indexable inserts Max cutting diameter 90 mm 32 mm solid shank Overall length 195 mm Precision and stability for repeatable internal bores This boring bar is built to provide consistent bore quality across series production. The combination of a 32 mm shank and a substantial overall length of 195 mm reduces vibration and runout, which in turn supports tighter tolerances and improved surface finish. By using indexable inserts, the cutting edge can be renewed quickly without regrinding, so production downtime is reduced and process stability is maintained. The tool's design focuses on repeatability and mechanical rigidity, which are decisive factors when multiple identical bores are required in short cycle times. Efficient performance through insert compatibility Compatibility with CCMT 09T3 inserts ensures straightforward insert selection and fast changeover. Indexable inserts deliver predictable wear behaviour and a well-defined cutting geometry, which is advantageous for both roughing and finishing passes. With a maximum cutting diameter of 90 mm, the tool covers a wide range of internal turning tasks while standard insert formats keep tooling logistics simple. This arrangement improves machining efficiency and lowers unit cost by extending effective cutting time per insert. Easy integration into workshop workflows The tool's measurable data—90 mm max cutting diameter, 32 mm shank diameter, 135 mm cutting length on the shank and 195 mm overall length—supports quick planning for machine setup and clamping. These figures are supplied so that toolholders and spindle arrangements can be matched precisely, avoiding unnecessary trial-and-error during first-off trials. Tool handling and insert replacement follow familiar workshop procedures, enabling smooth integration into existing turning and CNC processes without demanding special fixtures. Built for professional environments and reliable supply Designed for industrial use, the tool balances rigidity with practical serviceability: indexable inserts allow prompt edge changes while the bar remains in service. This approach reduces scrap risk and optimises tool life management. The product is supplied through established distribution channels, guaranteeing availability and consistent quality control. The focus is on enabling firms to maintain production continuity with minimal tooling-related interruptions, supporting steady throughput on the shopfloor. For precision internal boring with a 32 mm solid shank and CCMT 09T3 compatibility, contact Metav Werkzeuge for tailored advice and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKB132TM Manufacturer: Teknik Makina Product name: Internal boring tool Facts Max cutting diameter: 90 mm Shank diameter: 32 mm Shank cutting length: 135 mm Overall length: 195 mm Weight: 2.942 kg Special features Compatible inserts: CCMT 09T3 Indexable-insert boring application Suitable for internal turning operations FAQ What inserts does this boring tool accept? The internal boring tool accepts CCMT 09T3 indexable inserts; the toolholder and insert geometry are matched for straightforward replacement and stable cutting performance. Which machines is the tool intended for? This bar is designed for CNC lathes and turning centres where internal boring with indexable inserts is required; it is suitable for standard toolholders that accommodate a 32 mm shank. What is the maximum bore diameter achievable? The tool is specified for a maximum cutting diameter of 90 mm, which defines the upper range for internal machining tasks with this holder. How does insert replacement affect uptime? Using indexable inserts such as CCMT 09T3 significantly reduces downtimes because worn edges are exchanged rapidly, keeping the holder in service and shortening interruption times. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Robust, indexable boring bar engineered for stable internal machining: the combination of a 40 mm shank, long 220 mm cutting length and compatibility with CCMT 09T3 inserts ensures consistent results and reduced setup time. Order directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina TKB134TM Boring Bar — Indexable for CCMT 09T3, Ø70 mm The Teknik Makina TKB134TM is a heavy‑duty boring bar designed for precision internal machining in metalworking and CNC turning centres. Indexable inserts CCMT 09T3 compatible Max cutting diameter 90 mm Robust 40 mm shank, 290 mm overall length Enhanced rigidity for deep, accurate internal cuts The TKB134TM delivers increased rigidity through a substantial 40 mm shank and a carefully balanced mass, which reduces vibration during deep internal cuts. With a 220 mm cutting length and a listed 90 mm maximum cutting diameter, the toolholder maintains bore tolerances and roundness even under interrupted cuts. This mechanical stability translates into fewer reworks and predictable machining cycles on production lines, supporting higher first‑pass yield and lower tool change frequency. Fast insert changes and consistent surface quality Compatibility with indexable inserts in the CCMT 09T3 format offers straightforward, repeatable insert replacement and easy geometry selection for a range of turning tasks. The insert system allows for quick changeovers and cost‑effective maintenance: worn edges are replaced instead of the entire tool, reducing downtime and inventory complexity. Where surface finish is critical, the system supports stable chip control and a consistent surface finish, reducing the need for secondary operations. Built for workshop reliability and simple integration Constructed for day‑to‑day industrial use, the boring bar’s overall length of 290 mm and substantial mass (approx. 4.915 kg) afford the kind of stability expected in robust CNC turning operations. The combination of dimensions and build quality makes the bar suitable for retrofit into existing tool turrets and tool posts without complex adapters. Metav’s quality‑filter approach means the product arrives documented and ready for immediate use in production environments, supporting predictable lead times and dependable supply for workshop planning. Speak with Metav Werkzeuge for tailored tooling recommendations and procurement details for the Teknik Makina TKB134TM boring bar, delivered reliably from Emmerich with expert consultancy. Technical data Article number: TKB134TM Manufacturer: Teknik Makina Product: Boring bar (indexable) Core dimensions Max cutting diameter: 90 mm Diameter: 70 mm Shank diameter: 40 mm Cutting length: 220 mm Overall length: 290 mm Weight: 4.915 kg Special features Compatible inserts: CCMT 09T3 Insert type: indexable Application: internal machining Heavy‑duty construction FAQ Which insert format fits the boring bar? The TKB134TM uses CCMT 09T3 indexable inserts; this standard format supports rapid replacement and a wide choice of grades for different materials. What is the maximum cutting diameter for this tool? The maximum cutting diameter specified for the tool is 90 mm, with a nominal diameter dimension of 70 mm noted in the technical data. What are the key mounting dimensions? Mounting and integration are facilitated by a 40 mm shank and an overall length of 290 mm, with a 220 mm effective cutting length. Is the boring bar suitable for CNC turning centres? Yes. The TKB134TM is designed for internal machining on metalworking lathes and CNC turning centres where a rigid, indexable solution is required. How heavy is the tool and what does that imply for stability? The tool weight is approximately 4.915 kg, which contributes to stability and dampening during deep boring operations, improving dimensional consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com