150mm Cartridge for Boring Tool 90-130 CCMT 1204, Replacement - Teknik Makina

Benefit from a rigid, indexable design with a 32 mm shank and 130 mm max cutting diameter that keeps bore-enlargement cycles stable and predictable; the combination of long cutting length and CCMT insert compatibility simplifies tooling logistics. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar TKB136TM — indexable internal boring tool, CCMT 09T3 compatible (Teknik Makina) The Boring Bar TKB136TM is an indexable internal boring tool designed for diameter enlargement and internal turning operations on CNC lathes and boring machines. CCMT 09T3 insert compatibility Max cutting diameter 130 mm 32 mm robust shank diameter 115 mm effective cutting length Greater process stability from a rigid shank geometry The combination of a 32 mm shank and a substantial overall length provides increased stiffness during internal cutting, which reduces vibration and improves surface finish on the bore. A rigid toolholder translates into fewer rework cycles and more consistent part tolerances; for shops that need repeatable bore quality, this results in measurable time savings at the inspection stage. The construction supports precise, enlarged bores while maintaining cutter life when paired with suitable carbide inserts. Faster tool changes and sustained throughput with indexable inserts Built for CCMT 09T3 indexable inserts, the tool eliminates the need for full-tool regrinding and allows quick corner changes when an edge is worn. Indexable inserts are replaceable carbide tips that restore cutting geometry in seconds, helping to keep spindle downtime to a minimum and maintain production momentum. The 115 mm cutting length enables extended reach into deeper bores without compromising rigidity, which helps to sustain stable cycle times on serial production runs. Simple integration into existing toolrooms and CNC setups With an overall length of 175 mm and a clear designation as an indexable boring bar, the unit installs easily into standard toolholders and turrets. The documented weight of 3.13 kg indicates a solid build suitable for industrial use, while the clear compatibility with CCMT 09T3 inserts reduces the need for special consumables. For procurement and planning, the article is listed under SKU TKB136TM, making stock control and reordering straightforward. Contact Metav Werkzeuge for application advice on the Teknik Makina TKB136TM and to arrange supply or tooling recommendations from our specialists Technical Data Article number: TKB136TM Manufacturer: Teknik Makina Tool type: Boring bar (indexable) Core data Max cutting diameter: 130 mm Nominal diameter: 90 mm Overall length: 175 mm Shank diameter: 32 mm Effective cutting length: 115 mm Weight: 3.13 kg Special features Compatible with CCMT 09T3 inserts Indexable insert system SKU: TKB136TM FAQ What insert type does this boring bar use? The boring bar accepts CCMT 09T3 indexable inserts; the TKB136TM is designed for quick insert changes to reduce downtime. What is the maximum cutting diameter achievable with this tool? The tool supports a max cutting diameter of 130 mm, suitable for enlarged internal diameters within that range. What are the key dimensions for integration into a turret or holder? Important dimensions include a 32 mm shank diameter, 175 mm overall length, and 115 mm effective cutting length; these figures help determine holder compatibility for the TKB136TM. Is the tool suitable for deep-bore operations? The 115 mm cutting length offers extended reach for moderate depth bores while maintaining stiffness; deeper-bore requirements should be reviewed with tooling specialists. How is spare-part and reorder identification handled? Reorders and spare parts can be referenced using the SKU TKB136TM, which simplifies inventory tracking and procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable clamping, indexable-insert flexibility and long reach to reduce cycle times and tooling costs; order directly via Metav Werkzeuge or consult their technical advisors for specification matching. Ausbohrwerkzeug — indexable boring tool, compatible with CCMT 09T3, max Ø 130 mm | Teknik Makina The Ausbohrwerkzeug is a precision indexable boring tool designed for enlarging and finishing internal bores where extended reach and repeatable results are required *Indexable design for CCMT 09T3 inserts *Max cutting diameter 130 mm *32 mm robust shank for stable clamping *Total length 225 mm for deep reach Fewer tool changes thanks to indexable inserts and defined cutting range The holder accepts CCMT 09T3 indexable inserts, which allow rapid re-setting of cutting geometry without replacing the entire tool body. This indexable inserts approach reduces downtime and lowers per-operation cost compared with solid tools. With a max cutting diameter of 130 mm, the system covers a broad range of internal boring tasks while maintaining precision through repeatable insert positioning and secure clamping. Stable machining from a robust shank and mass A 32 mm shank and a total mass of 4.138 kg contribute to high rigidity during cutting, reducing chatter and improving surface finish on bored bores. The combination of a thick shank and substantial weight increases dampening at the cutting zone, so feeds and speeds can be optimised for productivity without compromising dimensional accuracy. The resultant stability supports consistent tolerances across serial production. Extended reach for deep internal operations with controlled cutting length The assembly provides a cutting length of 165 mm and an overall length of 225 mm, enabling access to deeper bores while keeping overhang to a manageable level. Longer reach is paired with a design that maintains alignment, so finishing passes remain effective and setup time is minimised. The tool is therefore suited to workflows where accessibility and retained concentricity are priorities. Maintenance efficiency and inventory benefits from replaceable inserts By using replaceable inserts, wear is isolated to small, low-cost components while the main body remains in service. This simplifies stock management and lowers tooling expenditure over time: only worn inserts need replacement rather than entire bars. The indexable format also permits rapid visual checking and fast changeovers, supporting tight production schedules and predictable maintenance intervals. For tailored advice on suitability for specific machines or components, contact Metav Werkzeuge for a specification review at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge can advise on insert choices, clamping solutions and delivery options Technical data Article number: TKB138TM Manufacturer: Teknik Makina Name: Ausbohrwerkzeug Suitable for inserts: CCMT 09T3 Facts Max cutting diameter: 130 mm Nominal diameter: 90 mm Shank diameter: 32 mm Cutting length: 165 mm Total length: 225 mm Weight: 4.138 kg Special features For indexable inserts CCMT 09T3 Indexable boring tool design SKU: TKB138TM FAQ What insert type is compatible with this boring tool? The boring tool is compatible with CCMT 09T3 indexable inserts, allowing rapid insert replacement and consistent cutting geometry. What is the maximum cutting diameter achievable with this tool? The assembly supports a max cutting diameter of 130 mm, suitable for enlarging and finishing medium-to-large internal bores. Which dimensions determine clamping stability? Clamping stability is primarily influenced by the 32 mm shank diameter and the overall mass (4.138 kg), which together reduce vibration and improve cutting stability. How long is the cutting reach for deep bores? The effective cutting length is 165 mm with a total tool length of 225 mm, offering extended reach while maintaining alignment for finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com