KXS-TM 55 mm Display Stainless Steel Evaluation Unit LCD, EU Power Supply - KERN

The compact design and dependable switching behaviour ensure consistent, hands‑free weighing operations, while the straightforward integration and light weight support efficient workflows in busy production or laboratory environments. Order the Footswitch KXS-A03 directly via Metav Werkzeuge or ask our consultants if needed. Footswitch KXS-A03 — KERN foot control for scales, compact and reliable The Footswitch KXS-A03 provides hands‑free switching for scales and weighing stations in industrial and workshop settings. Footswitch for scale operation KERN manufacturing quality Not retrofittable to other models Faster, repeatable hands‑free operation for weighing tasks The pedal control delivers a hands‑free trigger that stabilises process flow and reduces handling time during repetitive weighing operations. Designed for straightforward actuation, the unit supports consistent cycle times and helps avoid interruptions that can occur when operators must handle controls manually. With its compact footprint and light mass, the device minimises interference at the workplace while maintaining reliable switching behaviour for routine tasks. Designed integration and what “not retrofittable” means for workshops This control is built for direct integration with compatible weighing systems and is not retrofittable, which means retro‑installation to other scale models is not supported. That design choice ensures connector and function compatibility where the unit is specified, reducing the risk of mismatched signalling or unreliable behaviour. For installations where interchangeability is required, opting for a modular interface or confirmed compatibility list is recommended to guarantee correct operation. Low‑effort operation and dependable sourcing for professional environments The pedal switch offers simple mechanical operation with minimal maintenance demands, delivering long periods of use without complex servicing. Supplied by a manufacturer with an established reputation for metrology equipment, the component benefits from controlled sourcing and quality assurance practices that support reliable delivery to production benches and inspection stations. Its compact form factor and straightforward function make it an unobtrusive yet effective accessory for weighted processes. For precise hands‑free control choose the KERN Footswitch KXS-A03 from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for ordering or further technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: KXS-A03 Manufacturer: KERN GTIN: 4045761151895 Country of origin: CN Weight: 0.5 kg Tariff code: 84239010 Special feature: not retrofittable Facts ECLASS: 27371217 SKU: KXS-A03 Asset filename: KXS-A03-main.png Special features Category: Scales accessory (Waagen > Zubehör) Intended use: foot control for weighing equipment Delivery note: rapid dispatch available via reseller channels Origin: China (CN) FAQ What is the primary function of this footswitch? The footswitch KXS-A03 from KERN is a pedal control intended for hands‑free actuation of weighing systems and related scale equipment. Can the KXS-A03 be retrofitted to an existing scale? The KERN KXS-A03 is specified as not retrofittable; it is intended for direct integration where compatibility is confirmed by the scale manufacturer. How heavy is the unit and how does that affect installation? The KXS-A03 weighs 0.5 kg, which supports easy placement and secure mounting without significant load on mounting points. Is this footswitch suitable for industrial workshop environments? Yes, the pedal control is designed for professional weighing and workshop settings, providing simple, low‑maintenance hands‑free operation. KERN, China

Take advantage of wireless data transfer and a compact, lightweight design to streamline scale data capture and reduce transcription errors; the device also integrates smoothly into existing inspection workflows while noting it is not compatible with legal calibration. Order the KERN interface directly via Metav Werkzeuge or ask our consultants for tailored advice. KXS-A02 Bluetooth data interface — wireless data transfer to PCs and tablets (KERN) KXS-A02 Bluetooth data interface for cable-free transmission of readings from weighing instruments to PCs and tablets, suited to workshop and laboratory data capture Wireless data transfer to PC and tablets Compatible with KERN scales accessory Lightweight: approx. 0.1 kg Not compatible with legal calibration Faster, error‑reduced data capture for weighing processes The Bluetooth accessory connects weighing instruments to PCs and tablets to eliminate manual transcription and accelerate reporting. By enabling direct digital transfer of readings, the interface supports more consistent data logging and reduces the risk of entry errors that can interrupt production or quality assurance routines. Installation is intended to complement existing metrology workflows, providing a clear efficiency uplift where repeated measurements are captured for documentation. Practical integration that keeps workshop routines simple Designed as an accessory for weighing equipment, the unit combines a compact footprint with a lightweight build (approx. 0.1 kg) to avoid interfering with bench setups. The interface supports straightforward pairing with standard computing devices, keeping cabling to a minimum and freeing bench space for measurement tasks. This streamlined connection contributes to measurable time savings during routine checks and batch documentation, enhancing overall operational efficiency without changing established measurement practices. Appropriate applications and a critical limitation to note The interface is particularly useful in quality control, calibration labs (for non‑legal routines), and production monitoring where rapid transfer of weighing data into spreadsheets or inspection systems is required. It is not suitable for use in combination with legal calibration (Eichung); where official trade approvals or sealed-for-trade procedures are needed, alternative certified solutions must be used. For processes focused on consistent measurement and traceable records, the accessory supports better quality control and improved traceability of measurement results. Supply reliability and service from a precision partner Sourcing this accessory via Metav delivers the practical benefit of a dedicated European supply and a quality filter based in Emmerich. Metav combines decades of metrology experience with a broad portfolio — more than 250,000 products — and a long track record of satisfied customers, backed by a client base of over 48,000 customers. That presence ensures dependable availability and an established logistics chain to workshop benches across Europe, reinforcing reliable procurement for precision tools and accessories. Contact Metav Werkzeuge to arrange supply of the KERN KXS-A02 Bluetooth data interface and receive tailored advice from our technical consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: KXS SKU: KXS-A02 Manufacturer: KERN GTIN: 4045761151871 Origin: CN Tariff code: 84239010 Weight: 0.1 kg Core specifications ECLASS: 19050110 Weight: 0.1 kg GTIN: 4045761151871 Tariff code: 84239010 Design & features Wireless data transmission to PCs and tablets Accessory for weighing instruments Not compatible with legal calibration Lightweight design for workshop use FAQ How does the interface transmit readings to a computer? The interface uses Bluetooth radio to send measurement values from the weighing instrument to a connected PC or tablet, enabling direct capture into software or spreadsheets without manual entry. Can the device be used for official trade calibrations? No — the accessory is not compatible with legal calibration and must not be used where sealed or legally approved weighing procedures are required. Which weighing instruments is it compatible with? The accessory is intended as a KERN scales accessory and integrates with compatible KERN weighing instruments for wireless data transfer. Is the unit portable and suitable for mobile inspection tasks? Yes — its lightweight design (approx. 0.1 kg) and compact form make it suitable for benchtop and portable inspection setups where cable reduction is preferred. What are the identification details for procurement? Refer to the SKU KXS-A02 and GTIN 4045761151871 when ordering or checking compatibility with existing equipment. KERN — Origin: China (CN)

Take advantage of a height‑adjustable elevation solution combining robust stainless‑steel construction and a massive three‑legged tripod for reliable stability and precise positioning. Order the KERN YKP‑02 directly via Metav Werkzeuge or ask our consultants for advice and delivery from Emmerich. KERN YKP-02 Tripod Stand — height‑adjustable 750–1000 mm, stainless steel The KERN YKP‑02 is a tripod stand designed to raise indicator and evaluator units for workshop and laboratory use, providing stable positioning and broad compatibility with multiple KERN scale series. Height-adjustable 750–1000 mm Robust stainless-steel tripod base Designed for indicator/evaluator units Compatible with multiple KERN series Stable elevation for precise readings A height-adjustable tripod removes guesswork from set‑up: the 750–1000 mm range permits accurate placement of the evaluation unit at the operator’s preferred working height, reducing posture changes and measurement variation. The massive three‑legged base delivers stability on uneven surfaces, which supports repeatable readings and protects sensitive load cells from unwanted lateral forces. This results in fewer rechecks and a smoother inspection workflow. Built for compatibility and workflow efficiency The stand is intended for mounting evaluation units and is compatible with a wide range of KERN series, simplifying procurement and reducing inventory complexity. Its universal mounting capability ensures the tripod integrates with existing weigh‑and‑measure equipment, enabling faster set‑up times and less downtime between jobs. The compatibility aspect therefore contributes directly to improved throughput and predictable production planning. Durable materials for long service life Constructed from stainless steel with a heavy‑duty tripod foot, the stand resists corrosion in workshop environments and sustains repeated handling without loss of function. Where painted steel components are supplied, the finish adds protection against abrasion. The material choice focuses on longevity and low maintenance, translating to reduced total cost of ownership over the product life cycle. Practical handling and application benefits With a net weight of 2.6 kg and a compact footprint, the tripod offers a practical balance between portability and robustness. The design supports simple vertical adjustment while keeping the mounted device secure; this simplifies calibration tasks and routine inspections. For users aiming for reliable positioning of displays and indicators, the stand enables stable visual alignment and safer working practices. Contact Metav Werkzeuge today for tailored advice on integrating the KERN YKP‑02 tripod into existing measurement setups and to arrange prompt delivery from our Emmerich warehouse. Technical data Article number: YKP-02 Manufacturer: KERN SKU: YKP-02 GTIN: 4045761184374 Origin: CN Facts Height range: 750–1000 mm Weight: 2.6 kg HS code (Tariff): 73269098 eCl@ss: 21170601 Special features Stainless steel with massive tripod base Height-adjustable Painted steel option / stainless finish For elevating indicator / evaluator units Compatible with BFB, BXS, BFS, BFA, BBB, BBN, BKN, IFS, IFB, KFE-TM, KXG-TM, KXS-TM, KEN-TM, NFB, NBB, SFE, UFA, UFB, UFC FAQ What is the adjustable height range of the tripod? The KERN YKP‑02 tripod offers a height range of 750–1000 mm, which allows precise positioning of evaluation units at ergonomic working heights. Which materials are used in the construction of the stand? The stand is supplied in stainless steel with a massive three‑legged base; painted steel versions are noted where applicable for increased surface protection. Is the tripod compatible with my KERN evaluation unit? Compatibility is wide: the KERN YKP‑02 is designed to fit numerous KERN series including BFB, BXS, BFS, BFA and others listed in the technical information, ensuring straightforward integration. How heavy is the tripod and what does that mean for handling? The KERN YKP‑02 weighs 2.6 kg, balancing ease of repositioning with sufficient mass for stable mounting in routine workshop and laboratory tasks. Can the stand improve measurement repeatability? Yes. By providing a stable, height‑adjustable support for the evaluation unit, the tripod reduces movement and misalignment, which helps improve repeatability of readings. Manufacturer: KERN; Origin: CN; Contact: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271

Take advantage of the combination of long runtime, rapid recharge and proven KERN compatibility to keep weighing operations uninterrupted. Order the power module directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN GAB-A04 internal battery pack — up to 90 h runtime, approx. 12 h recharge The GAB-A04 is an internal rechargeable battery pack for KERN weighing instruments, designed to deliver extended operation between charges and secure measurement availability in workshop and industrial settings. Internal rechargeable battery operation Up to 90 h runtime (without backlight) Full recharge in approx. 12 h Compatible with KERN scale series Fewer interruptions thanks to extended operation The internal power module provides a long runtime of up to 90 h without backlight, which means extended periods of unattended measurement and less need for mains connection. For production environments and mobile weighing tasks this reduces process interruptions and allows measuring equipment to remain operational during shift changes or temporary site relocations. The specification assumes operation with the display backlight switched off; enabling illumination will reduce the runtime accordingly. Fast recharge to keep workflows moving A complete recharge takes approximately 12 h, allowing predictable scheduling of maintenance windows and ensuring the instrument is ready for the next workday. The charging characteristic supports efficient turnaround between uses, and the unit’s modest mass of 0.74 kg makes replacement and handling straightforward for workshop staff. These attributes contribute directly to higher equipment availability and lower indirect labour costs associated with battery management. Designed for seamless integration with KERN instruments This battery pack is intended as an internal accessory for KERN weighing devices and is supplied as a purpose-built power solution rather than a third-party retrofit. The design focuses on plug-and-play compatibility with the relevant scale range, simplifying installation and avoiding complex conversions. As a dedicated power module it maintains the instrument’s original operation modes and preserves calibration routines, supporting consistent measurement results in daily use. Reliability backed by a trusted distributor network Sourcing the power module through an established partner ensures dependable supply and after-sales continuity. Metav Werkzeuge acts as a quality filter for the European market, combining long-standing expertise with a wide product range to simplify procurement. The combination of component reliability and a dependable logistics partner reduces the risk of downtime and supports uninterrupted measurement capability in industrial and workshop environments. Contact Metav Werkzeuge in Emmerich to secure a KERN GAB-A04 for your scales or request further technical clarification via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: GAB-A04 Manufacturer: KERN GTIN: 4045761126473 Country of origin: CN Facts Weight: 0.74 kg Recharge time: 12 h Battery runtime: up to 90 h (without backlight) Tariff number: 85072080 ECLASS: 21059207 Special features Internal battery operation for scales Lead (Pb) battery chemistry Accessory for weighing equipment Product group: batteries / accumulators Segment: scale accessories FAQ Is the battery compatible with all KERN scales? The battery pack is designed for integration with the relevant KERN weighing instrument series; compatibility should be checked against the instrument model and specifications. How long does a full recharge take? A full recharge requires approximately 12 h under standard charging conditions for the GAB-A04 internal pack. What runtime can be expected in daily use? The specified runtime is up to 90 h without display backlight; using the backlight or additional functions will reduce available operating time. What type of battery is used in this module? The unit uses a lead (Pb) accumulator chemistry, specified for internal operation in compatible KERN instruments. Is the runtime affected by instrument settings? Yes. Features such as display illumination and frequent data transmissions shorten the battery life compared with the quoted figure for non-illuminated operation. KERN · Origin: CN · GTIN: 4045761126473

Reliable serial connectivity and a compact form factor ensure dependable data transfer for industrial weighing applications; the RS-485 interface offers robust signal integrity while the module’s light weight supports simple installation. Take advantage of the combination of dependable performance, seamless system integration and KERN’s build quality. Order the RS-485 data interface directly via Metav Werkzeuge or ask our consultants if needed. KXS-A01 RS-485 Data Interface (Serial Connectivity, Compact Design) by KERN KXS-A01 RS-485 Data Interface is a compact serial module for integration into industrial weighing setups, enabling reliable digital transmission between scales and host systems. RS-485 serial data transmission Compact, lightweight design 0.1 kg Designed for direct integration, not retrofittable Manufacturer quality: KERN standard Robust serial connectivity for reliable weighing data The RS-485 connection provides a proven method for long-distance, noise-resistant data transfer in industrial environments. As an industrial-grade serial interface, the module concentrates on stable signal routing and minimal interference, which reduces retransmissions and data errors. The assembly’s compact footprint and negligible mass (0.1 kg) keep the hardware load low and simplify mechanical integration into existing instrument housings. For production environments where consistent readouts are critical, the unit supports dependable communication between weighing instruments and automation or data-logging systems. Integration optimised for system compatibility and uptime Designed for direct installation into compatible weighing instruments, the module prioritises straightforward electrical and logical integration. The serial interface is intended to plug into RS-485-capable hosts and leverages balanced differential signalling to maintain signal integrity across longer cable runs. Because this variant is not retrofittable, the module is best specified at the point of instrument ordering or during planned upgrades, ensuring hardware and firmware alignments are met and reducing unforeseen downtime during installation. Operational benefits that drive production efficiency Using a dedicated RS-485 interface reduces the need for intermediate converters and cuts points of failure in data paths, which translates into measurable workflow gains. The result is improved throughput and fewer interruptions to measurement logging or process control—advantages that contribute directly to operational efficiency. Where traceability and repeatable measurement records are required, the interface supports stable serial communication that helps downstream systems maintain accurate logs and comply with data-handling procedures. Quality and supply reliability for precision environments KERN’s reputation for measurement technology is reflected in this interface’s engineering choices, with emphasis on durable connectors and consistent electrical performance. For buyers seeking a partner that couples product reliability with dependable supply, Metav Werkzeuge acts as a quality filter for the European market; the arrangement supports predictable procurement and ongoing availability for production use. This makes the interface a pragmatic option for workshops and industrial users who prioritise long-term equipment dependability. For tailored integration of the KXS-A01 RS-485 data interface, contact Metav Werkzeuge for procurement guidance and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KXS-A01 SKU: KXS-A01 Manufacturer: KERN Designation: Datenschnittstelle RS-485 Core technical data Weight: 0.1 kg EClass: 19050111 Special features RS-485 serial interface Not retrofittable Intended for integration into weighing instruments Compact, lightweight module FAQ What is the primary function of this interface? The RS-485 data interface provides serial communication between weighing instruments and host systems, enabling stable digital data transfer for logging or control. Can the interface be retrofitted into existing scales? No, the module is specified as not retrofittable and is intended for direct integration during original equipment configuration or planned upgrades. Which systems are required to use the interface? A host device or controller with RS-485 compatibility is required; the interface implements balanced differential signalling for industrial data lines. How heavy is the interface module? The KXS-A01 weighs approximately 0.1 kg, supporting minimal mechanical impact on the host instrument. Who manufactures this interface and what is the SKU? The module is manufactured by KERN and marketed under SKU KXS-A01. KERN — address and contact details not provided

Benefit from a combination of reliable protection, broad compatibility and straightforward replacement to keep weighing processes uninterrupted; order the accessories directly via Metav Werkzeuge or consult our specialists for further advice. KXS-A07S05 Protective Hood — Pack of 5 for KXS‑TM scales by KERN The KXS-A07S05 protective hood provides a practical cover for workshop and industrial weighing stations, designed to shield KXS‑TM scales from dust and incidental splash while preserving measurement reliability. Pack of 5 for immediate replacement Compatible with KXS‑TM scale models Lightweight design for quick fitting Suitable for workshop and industrial use Preserve measurement accuracy with targeted protection A dedicated protective hood reduces the risk of contamination on the weighing surface and surrounding sensors, helping to maintain consistent results. The hood’s compatibility with KXS‑TM models ensures a correct fit that minimises reset intervals and calibration drift. By preventing dust ingress and incidental splashes, the cover supports uninterrupted operation and reduces the need for frequent cleaning cycles, which in turn contributes to improved process efficiency and fewer production delays. Fast servicing and low operational downtime The cover has been conceived as a simple, replaceable accessory that allows for rapid swapping during routine maintenance. The lightweight construction keeps handling straightforward, while the design avoids time‑consuming fastening procedures. This means less time at the bench for maintenance staff and quicker return to measurement tasks. When integrated into a scheduled maintenance plan, the hood helps to sustain throughput and promotes predictable operational availability. Practical supply and workshop compatibility Delivered as a multi‑unit set, the accessory is tailored for workshops and service departments that require immediate spares on hand. The item’s design is focused on functional protection rather than decorative features, which keeps procurement and inventory management efficient. Where hygienic or controlled environments are in use, the cover acts as an additional barrier that complements established cleaning routines without introducing complex handling requirements. For tailored advice or to secure this KERN protective hood set quickly from Metav Werkzeuge, contact our consultants by email or phone and benefit from local stock and direct supply from Emmerich. Technical Data Article number: KXS-A07S05 Manufacturer: KERN SKU: KXS-A07S05 Facts Net weight: 0.01 kg Tariff code: 39269097 eCl@ss: 24322502 Special features Compatibility: for KXS‑TM scales Pack contents: set, delivery includes five pieces Origin: CN FAQ Is the hood compatible with other KERN models? The KXS-A07S05 hood is specified for KXS‑TM scales; compatibility with other KERN models is not stated and should be confirmed before purchase. What material is the protective hood made of? Material data is not provided for the KXS-A07S05; refer to product documentation or consult Metav Werkzeuge for detailed specifications. Is the cover intended to be disposable or reusable? The KXS-A07S05 is supplied as a replaceable accessory set; reuse depends on contamination level and internal maintenance policies. How is the hood fitted to the weighing instrument? Fitting is straightforward and designed for quick placement on the KXS‑TM housing to restore protection with minimal downtime. Where is the product manufactured? The KXS-A07S05 protective hood is manufactured in China KERN — Origin: China — Tariff code: 39269097

Reliable data transfer and factory-fitted compatibility keep weighing workflows uninterrupted; the compact, lightweight construction supports tidy installation and easy integration on the shop floor. Order the interface cable directly via Metav Werkzeuge or consult our advisers for technical clarification. KXS-A04 Interface cable (Factory Option) by KERN — reliable data link, compact design The KXS-A04 is a factory option interface cable intended to provide a direct data connection between KERN weighing instruments and external devices, optimising measurement workflows in industrial and workshop environments. Factory option for KERN scales Reliable serial data transmission Compact and lightweight, 0.1 kg Quick integration for weighing systems Keep measurement data flowing with minimal effort The interface cable delivers a straightforward means of transferring recorded values from weighing instruments into production systems or data collectors, reducing manual transcription and the risk of entry errors. As a factory option, the cable is built to match the electrical and mechanical requirements of KERN devices, which simplifies commissioning and avoids time-consuming adaptations. This stabilises data capture across repetitive weighing tasks and supports process reliability in quality-controlled environments. Installation that reduces downtime and clutter Designed for simple routing and a modest footprint, the accessory is compact and weighs only 0.1 kg, allowing neat panel and bench installations without adding bulk. The design prioritises ease of connection so that integration into existing setups can be completed with minimal disruption to production. Clear labelling and a robust connector interface mean less time spent diagnosing connection faults and more time on productive measuring and inspection work. Built for dependable use in metrology workflows As an accessory for weighing systems from KERN, the cable is intended to match professional workshop demands and to be stored or deployed easily as required. Identified by SKU KXS-A04 and GTIN 4045761151901, the component supports a consistent equipment configuration strategy for serialised instruments and spares management. Origin information is recorded as CN, and the design reflects an emphasis on functional reliability and compatibility rather than decorative elements. For dependable integration of KERN weighing instruments, request the KXS-A04 factory option from Metav Werkzeuge — our advisers can confirm fitment and provide procurement guidance via info@metav-werkzeuge.com or by telephone Technical Data Article number: KXS-ACC Manufacturer: KERN SKU: KXS-A04 GTIN: 4045761151901 Country of origin: CN Tariff number: 84239010 ECLASS: 19050112 Weight: 0.1 kg Core Data Weight (kg): 0.1 GTIN: 4045761151901 Tariff code: 84239010 ECLASS: 19050112 Special features Factory option for KERN scales Category: Scales / Accessories Compact, lightweight design SKU: KXS-A04 FAQ Is the cable compatible with KERN weighing instruments? The KXS-A04 is supplied as a factory option for KERN weighing instruments and is intended to match the device interfaces specified by the manufacturer. What is the weight and size consideration for mounting? The cable weighs 0.1 kg and is designed for compact routing and minimal panel space, allowing tidy installations in workshop and production environments. Does the package include any software or drivers? The KXS-A04 provides the physical interface; software or driver requirements depend on the connected system and should be confirmed with the weighing instrument manual or our technical advisers. How is the component identified for stock and procurement? The accessory is listed under SKU KXS-A04 and GTIN 4045761151901, and the article number for ordering is KXS-ACC. KERN – Origin: CN · Distributor contact: info@metav-werkzeuge.com · +49 2822 7131930