LCD Display Evaluator KFS-TM 16.5mm Digits, RS-232, Wall Mountable, EU Type Approval - KERN

Summary and Technical Data for KERN Y-Schnittstellenkabel :Manufacturer: KERNSeries: CFSModel: Y-SchnittstellenkabelOrder your new Y-Schnittstellenkabel now Online!

Take advantage of reliable RS-232 data transfer and a 1.5 m cable length to integrate measurement equipment smoothly into existing workflows. Order the cable directly via Metav Werkzeuge from the Emmerich warehouse or request tailored advice from our consultants. MLB-A05 Interface Cable — RS-232 connection, 1.5 m (KERN) The MLB-A05 Interface Cable is a dedicated RS-232 connection lead for weighing instruments and laboratory balances, engineered to provide steady data transmission between measurement devices and external systems. RS-232 serial interface 1.5 m cable length Compatible with KERN balances Robust connector design Ensure accurate data logging with stable RS-232 transfer The RS-232 interface offers a proven, industry-standard method for serial data exchange, making this cable well suited to industrial metrology and laboratory environments where measurement integrity matters. By providing reliable data transfer, the cable reduces the risk of communication errors during recording and logging tasks, which in turn supports traceability and process consistency. The design supports routine integration into existing measurement setups without requiring changes to software or instrument firmware. Easy integration and clear compatibility for weighing systems With a 1.5 m lead, connection flexibility between bench instruments and nearby data terminals is increased while keeping cable routing tidy in workshop or lab setups. The cable is specified for use with RS-232-equipped devices commonly found on balances and related instruments, ensuring broad compatibility across models. Installation is straightforward: the interface lead serves as a direct conduit for serial signals, simplifying set-up procedures and reducing the need for adapters or converters in typical measurement environments. Built for dependable workshop and laboratory use The cable’s construction balances a robust connector with low weight, enabling frequent handling and routine use at weighing stations without imposing undue strain on instrument ports. The modest mass supports neat cable management and minimises mechanical load on connectors during daily operation. Sourced under the KERN product line, the accessory is intended to complement precision equipment with components that preserve uptime and support consistent measurement workflows. For reliable serial connectivity choose the KERN MLB-A05 interface cable—contact Metav Werkzeuge in Emmerich for specialist guidance or to order directly from our stock. Technical data Article number: MLB-A05 Manufacturer: KERN SKU: MLB-A05 GTIN: 4045761245204 Core data Cable length: 1.5 m Weight: 0.08 kg ECLASS: 19050112 Tariff code: 84239010 Special features Interface: RS-232 Category: Accessories for scales Origin: China FAQ What interface does this cable use? The MLB-A05 interface cable uses the RS-232 serial interface for data transfer between balances and external devices. Is the cable compatible with KERN scales? Yes, the lead is specified for compatibility with KERN weighing instruments and other devices that provide an RS-232 port. How long is the cable and how heavy is it? The cable measures 1.5 m in length and has a weight of 0.08 kg, suitable for bench-top and near-equipment routing. Can this cable be used for data logging to a PC or printer? The MLB-A05 is designed for RS-232 connections and can be used to link RS-232-capable instruments to serial printers or data acquisition systems that accept serial input. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN

Reliable RS-232 data transfer combined with a 1.5 m cable length and a compact weight of 0.07 kg enables straightforward integration into existing workshop and laboratory setups; Order the CFS-A01 directly via Metav Werkzeuge or ask our consultants if needed CFS-A01 RS-232 interface cable by KERN — 1.5 m, lightweight A CFS-A01 RS-232 interface cable for linking precision scales and terminals to data acquisition systems, designed for reliable serial communication in industrial and workshop environments RS-232 interface for stable data transfer 1.5 m length for flexible device placement Compatible with KERN scales and terminals Lightweight 0.07 kg for easy handling Stable serial connection for precise measurement transfer The RS-232 protocol remains a standard for reliable, real-time data transmission in metrology and weighing applications. This serial lead ensures consistent data flow from measuring instruments to terminals or PCs, reducing the risk of transmission errors that can affect traceability. Built for industrial use, the cable supports common serial communication requirements and simplifies integration into existing measurement chains. The minimal signal loss and shielding typical of RS-232 connections help maintain measurement integrity during logging or process control. Flexible installation that suits bench and test environments With a 1.5 m length the lead offers practical reach between bench-top scales and nearby data collection hardware without excess cable clutter. The cable’s moderate span enables tidy routing behind workstations and straightforward placement in racks or carrying cases. Its design supports rapid reconnection and reduces setup time during shift changes or when moving devices between test stations, contributing to improved uptime and a smoother workflow in production and laboratory contexts. Compact handling and dependable supply chain quality The cable’s lightweight build (0.07 kg) makes handling and storage effortless, while still meeting the robustness expected for workshop accessories. As part of Metav’s curated offering, this accessory is supplied with a consistent quality filter from Emmerich, ensuring reliable availability for industry users. The combination of compact dimensions and dependable manufacture reduces logistical friction and supports uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge for purchasing or specialist advice on integrating the CFS-A01 into existing measurement systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CFS-A01 Manufacturer: KERN GTIN: 4045761245198 Country of origin: CN Measurements / Core data Cable length: 1.5 m Weight: 0.07 kg Special features Interface: RS-232 Category: Scales → Accessories Intended use: Connection of scales and terminals for data transfer FAQ What interface does the cable use? The CFS-A01 uses an RS-232 serial interface for stable, real-time data transfer between scales and downstream devices. What is the usable cable length? The cable provides a fixed length of 1.5 m, offering practical reach for bench and workstation arrangements. Is the cable compatible with KERN weighing instruments? Yes, the lead is specified for use with KERN scales and terminals and is intended for direct serial connections where RS-232 is supported. How heavy is the cable and how does that affect handling? Weighing 0.07 kg, the lead is lightweight and easy to route, store and reconnect without adding significant bulk to instrument setups. Can the cable be used with modern PCs without a serial port? The CFS-A01 communicates via RS-232; for PCs lacking a serial port, a USB-to-RS232 adapter can be used to bridge the connection. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930

Reliable internal power for weighing instruments with a compact lead‑acid design: 6 V / 1.2 Ah capacity and up to 20 h runtime without backlight, plus a standard 12 h recharge cycle and a lightweight 0.3 kg housing for straightforward installation. Order directly via Metav Werkzeuge or consult our advisers for compatibility and procurement guidance. KFB-A01 Internal rechargeable battery (6 V, 1.2 Ah) by KERN The KFB-A01 is an internal lead‑acid rechargeable battery designed as a power supply for precision scales and weighing modules, providing extended portable operation and reliable backup power in workshop and industrial environments. Internal rechargeable lead-acid battery 6 V 1.2 Ah Runtime up to 20 h without backlight Charging time 12 h for full readiness Compact weight 0.3 kg for simple installation Long operating time for uninterrupted weighing processes The internal rechargeable module delivers a clear operational advantage for mobile or battery‑dependent weighing equipment: with 6 V and 1.2 Ah nominal capacity, the cell supports continuous use up to 20 h without backlight, reducing interruptions in measurement cycles and minimising downtime. For businesses that rely on accurate, reproducible weighing—such as small production lines, incoming goods inspection and mobile service units—this extended runtime translates into fewer recharges and more stable workflows. The lead‑acid (Pb) chemistry offers predictable discharge behaviour, which simplifies run‑time planning in daily operation. Simple integration and predictable recharging Charging behaviour and installation are designed for straightforward integration into existing instruments. The battery reaches full charge in 12 h, allowing overnight replenishment during non‑productive hours and predictable readiness for the next shift. At 0.3 kg, the unit is light enough for compact housings while remaining robust for workshop conditions; the modest mass also eases handling during maintenance or replacement. The compact format and internal mounting reduce the need for external adapters and help maintain the original instrument footprint, preserving ergonomics and transportability. Reliability, compatibility and operational benefits Manufactured by KERN, this power module is tailored for weighing accessories and support applications where dependable backup power is essential. The rechargeable battery functions as an internal power source, ensuring that calibration routines and data logging are not disrupted by mains interruptions or temporary field assignments. For operators with mixed fleets of scales, the standardised electrical values facilitate compatibility checks and spare‑parts management. The combination of consistent discharge, recognised chemistry and compact design supports a predictable maintenance rhythm and contributes to long‑term process reliability Specify the KFB-A01 when ordering through Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement advice and technical matching Technical data Article number: KFB-A01 Manufacturer: KERN GTIN: 4045761113848 Country of origin: CN Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Tariff number: 85072080 eClass: 21059207 Core specifications Voltage: 6 V Capacity: 1.2 Ah Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Features & compatibility Type: Pb lead‑acid internal power supply Category: Accessories for scales SKU: KFB-A01 Manufacturer: KERN Origin: CN FAQ What is the expected runtime under normal use? The KFB-A01 offers a runtime of up to 20 h without backlight; actual duration depends on instrument power consumption and usage patterns. Which battery chemistry is used and what does it mean for maintenance? The module uses a lead‑acid (Pb) chemistry, which provides predictable discharge curves and simple maintenance handling compared with more complex chemistries. How long does the battery take to fully recharge? Charging to full capacity takes 12 h under standard charging conditions, making overnight cycles practical for regular operation. Is the unit suitable as a permanent replacement for mains power? The battery is intended as an internal rechargeable power source and backup for scales; long‑term continuous mains replacement is not the primary application. Can the module be integrated into different scale models? The KFB-A01 is designed as an accessory for weighing equipment; compatibility should be confirmed against instrument electrical specifications and mounting provisions. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271