150mm Carbide Scriber Pencil With Replaceable Carbide Tip, Clip - Metav IndustryLine
€5.00
Product information "150mm Carbide Scriber Pencil With Replaceable Carbide Tip, Clip - Metav IndustryLine"
Take advantage of the combination of robust replaceable carbide tip, compact mechanical‑pencil form and light weight for precise, low‑maintenance workshop marking; order directly via Metav Werkzeuge or consult the team for application advice.
Carbide scribing needle in mechanical‑pencil form, 150 mm with replaceable carbide tip (M214.035.N)
The Carbide scribing needle in mechanical‑pencil form, 150 mm with replaceable carbide tip is a compact marking tool designed for precise layout and scribing in metalworking and general workshop use.
- Replaceable carbide tip for long service life
- Mechanical‑pencil form for controlled marking
- 150 mm overall length for precise reach
- Lightweight: 20 g for comfortable handling
Precise, durable marks from a replaceable carbide tip
The core advantage of this marking tool is its replaceable carbide tip, which ensures consistently sharp, durable marks on hard materials while keeping life‑cycle costs low. The hard‑metal tip holds an edge far longer than softer leads, so fewer tip changes are required and marking quality remains reproducible for layout, centre‑punch substitution and scribe lines. This reliability supports leaner workflows and reduces downtime associated with frequent tool changes.
Compact form for confident control and repeatability
Thanks to the mechanical‑pencil style body and a total length of 150 mm, the instrument offers controlled one‑hand operation and improved tactile feedback compared with larger scribers. The compact design concentrates mass near the tip for stable contact and accurate line placement, making it well suited to detail work on fixtures, small assemblies and component edges. The lightweight construction reduces operator fatigue during repetitive marking tasks while preserving steady handling.
Serviceable design that supports workshop sustainability
A replaceable tip concept maximises usable product life and simplifies maintenance: worn or damaged carbide points can be changed without replacing the whole tool, which reduces consumable waste and procurement overhead. The simple geometry of the tip also means easy reconditioning and fast availability of spares. For workshops that value dependable marking performance and predictable tool upkeep, this scribing instrument delivers both cost efficiency and operational continuity.
For dependable, serviceable marking tools from Metav IndustryLine, contact Metav Werkzeuge to discuss suitability for specific applications and to arrange supply of the M214.035.N carbide scribing needle.
Technical Data
- Article number: M214.035.N
- GTIN: 4054469106335
- ECLASS: 21049238
- Customs tariff number: 90172039
Facts
- Length: 150 mm
- Weight: 0.02 kg
Special features
- Replaceable carbide tip
- Mechanical‑pencil form
- Category: marking tools (Anreisszeuge)
- Label: Carbide scribing needle in mechanical‑pencil form, 150 mm with replaceable carbide tip
FAQ
What material is the tip made from?
The tip is made of carbide (hard metal); the M214.035.N is supplied with a replaceable carbide tip for durable marking.
Can the tip be replaced on site?
Yes, the tip of the M214.035.N is designed to be replaceable so the body is retained while worn tips are renewed.
Is this scribing needle suitable for fine workshop layout work?
The compact, mechanical‑pencil form and 150 mm length make the tool well suited to fine layout and detailed marking tasks in a workshop environment.
How heavy is the scribing needle in use?
The instrument weighs 0.02 kg (20 g), offering comfortable handling for repetitive marking operations.
Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Designation: | Reißnadel |
|---|
Zubehör
Take advantage of durable 2 mm leads with H hardness and a practical 90 mm length for consistent scribing and reduced rework; order directly via Metav Werkzeuge or contact our consultants for compatibility advice. Pencil lead for 214.035.N — 2 mm, H hardness (Metav IndustryLine) Pencil lead for 214.035.N designed as a refill for precision marking tools in workshops and production environments, providing consistent line quality for layout and scribing tasks. 2 mm diameter for robust, clear lines H hardness for precise, lasting marks 90 mm length for extended service life Consistent marking for production use These 2 mm marking refills deliver a uniform line that supports repeatable layout work on the shop floor. The H hardness produces a fine, controlled stroke that resists smudging while remaining visible for machining and assembly reference. Because the refills are 90 mm long and supplied as a pack of 10, downtime for replacement is minimised and workflow continuity is supported. The robust core diameter ensures good feed behaviour in mechanical holders and reduces breakage compared with thinner leads. Compatibility and practical handling benefits Designed for use with the compatible mechanical pencil model 214.035.N, the refills slot into existing holders without modification, simplifying stock management. The extended length allows several uses per refill before replacement, which reduces the frequency of tool servicing. The combination of 2 mm diameter and H hardness offers a balance between durability and precision, suitable for repetitive marking where line clarity and reproducibility matter most. Manufactured consistency and workshop reliability Metav IndustryLine production tolerances ensure each refill performs predictably when used in standard marking tools. Uniform core diameter and hardness classification result in consistent contact pressure and line thickness across multiple refills, helping to reduce measurement and layout errors that can lead to rework. The plain, compact packaging keeps spares organised in a toolbox or at a workstation for quick access. Efficient supply for everyday marking tasks A practical pack size of ten refills keeps resupply intervals economical and straightforward. The small weight and compact dimensions make storage and transport simple for workshop logistics, while the standardised dimensions mean spares are interchangeable across compatible holders. For procurement teams this means fewer SKU complexities and a dependable consumable for routine layout and scribing operations. For tailored advice on integrating Metav IndustryLine replacement leads into existing marking tools or to arrange a supply for your workshop, contact Metav Werkzeuge directly via info@metav-werkzeuge.com or by telephone; our consultants will advise on compatibility and delivery. Technical data Article number: M214.035.4 GTIN: 4054469182803 Brand: Metav IndustryLine Facts Diameter: 2 mm Length: 90 mm Weight: 0.001 kg ECLASS: 21049238 Special features Hardness: H Pack quantity: 10 refills Compatible with model 214.035.N FAQ What diameter are the leads and how durable are they? The leads are 2 mm in diameter; this thicker core gives robust performance and fewer breaks compared with finer refills, which improves handling during layout work. Which tool fits these refills? These refills are made for the holder referenced as 214.035.N; the Metav IndustryLine pencil lead M214.035.4 is fully compatible and fits without adjustment. How many refills are supplied and what is their length? The pack contains ten refills, each 90 mm long, providing extended use before replacement is required. What does the H hardness mean for marking? H hardness indicates a firmer core that produces precise, fine lines which are less prone to smudging—suitable for clear layout marks that must remain visible during machining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com