140mm Additional Stop For Angle Gauge 100x20x4 mm - Metav IndustryLine
€15.00
Product information "140mm Additional Stop For Angle Gauge 100x20x4 mm - Metav IndustryLine"
A compact auxiliary stop combines precise contact surface, 4 mm plate thickness and a 140 mm overall length to improve repeatability in tight angle setups; order the accessory directly via Metav Werkzeuge or consult our specialists for integration advice.
Auxiliary stop M214.050.A — Additional stop for angle measuring instruments, 140 mm overall length, 4 mm thick
M214.050.A is an accessory designed to extend the positioning options of angle gauges and to provide a stable contact for smaller-angle measurements in workshop and inspection environments.
- Fits 214.05 series angle gauges
- 140 mm overall length for compact setups
- 4 mm plate thickness for stable contact
- Lightweight 0.1 kg for easy handling
Improved setup repeatability for angle measurements
The auxiliary stop is engineered to deliver a consistent contact surface where repeatable positioning is essential. By adding a defined stop to the measuring fixture, the accessory reduces variation caused by informal seating or uneven clamping, turning an imprecise step into a measurable datum. The 4 mm thickness contributes to local stiffness, while the 140 mm overall length keeps the setup compact and suited to confined workspaces. These tangible characteristics translate into fewer recalibrations and a smoother inspection workflow when working with angle measuring instruments.
Compact design that supports efficient workshop handling
With overall dimensions of 100 x 20 x 4 mm and a weight of 0.1 kg (100 g), the unit is deliberately small and light for rapid retrofitting. The slim profile allows positioning close to the instrument without obstructing viewing angles or impeding tool paths. The modest mass keeps inertia low, which is advantageous when frequent repositioning is required on the shop floor; handling remains straightforward during set-up, measurement and storage. The combination of compact form and durable thickness supports both portability and robustness in everyday use.
Direct compatibility and practical application benefits
The stop is intended as an accessory for the 214.05 family of angle gauges, supplying a purpose-built contact for smaller angles and tight fixturing. Integration is typically fast: the stop provides a repeatable datum that reduces setup time and enhances measurement reliability, making it suitable for quality control, jigs and fixtures, and assembly checks. The clear, measurable features of this accessory support a rational purchasing decision: known dimensions, predictable behaviour and straightforward compatibility with existing angle-measurement systems.
Request the M214.050.A auxiliary stop from Metav Werkzeuge for reliable small-angle support — contact our Emmerich team for product matching or delivery advice and ensure smooth integration into existing measuring setups
Technical Data
- Article number: M214.050.A
- GTIN: 4054469182841
- Category: Angle measuring instruments
- Manufacturer: Metav IndustryLine
Facts
- Dimensions: 100 x 20 x 4 mm
- Overall length: 140 mm
- Material thickness: 4 mm
- Weight: 0.1 kg
Special features
- Compatibility: for 214.05 series angle gauges
- Intended use: additional stop for angle measurement setups
- Compact and lightweight for easy retrofitting
FAQ
What instruments is the auxiliary stop compatible with?
The auxiliary stop is designed for use with the 214.05 series of angle measuring instruments and provides a repeatable contact for smaller-angle setups; the product is listed as M214.050.A.
How does the stop improve measurement repeatability?
By offering a defined contact surface and a 4 mm plate thickness, the stop reduces positional variation and stabilises the component against the angle gauge, improving repeatability during successive measurements.
Is the unit easy to handle and install in a workshop environment?
Yes; the compact 100 x 20 x 4 mm footprint and 0.1 kg weight make the accessory straightforward to position, remove and store without affecting the measuring instrument’s visibility or accessibility.
Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Designation: | Zusatz-Anschlag |
|---|---|
| Material: | NoneNone |
Passend für
Take advantage of precise digital readout, robust steel construction and a locking mechanism for repeatable angle setups; order the device directly via Metav Werkzeuge or consult the technical team for application advice. M214.050 Digital Protractor – 0–180° range, 120 x 150 mm, locking screw The M214.050 is a compact digital angle gauge designed for setting, checking and transferring angles from 0–180° in machine shops and production fixtures. Digital display with ON/OFF, ZERO, HOLD/REV Wide 0–180° measuring range Steel stop and rail for robust stability Integrated locking screw for repeatable settings Accurate angle measurement that reduces setup time The digital display with a resolution of 0.05° delivers clear numerical readouts, eliminating ambiguity from analogue scales and speeding repeatability during setup. A precise numeric readout reduces cycle times when aligning fixtures or setting compound angles, because angle values can be set, zeroed and transferred without guesswork. The device supports quick reference functions—ZERO, HOLD/REV and ON/OFF—that simplify interim measurements and reversible reading for setups on mirrored parts. These features minimise rework and support consistent production quality across repeated tasks. Robust steel construction for dependable repeatability Stops and the measuring rail are made from steel, with a cross-section of 27.2 x 4 mm and material thickness of 4 mm, so the gauge resists flexing during normal workshop use. The integrated locking screw secures the blade once the required angle is set, which preserves the adjustment while components are transferred between machines or during inspection. At approximately 0.5 kg and with compact 120 x 150 mm dimensions the unit remains easy to handle yet stable enough for routine use on milling, drilling and assembly stations where reproducible angle clamping matters. Practical functions tailored to everyday workflows Designed for direct workshop application, the instrument combines a broad 0–180° range with simple controls that support straightforward operation under production conditions. The HOLD/REV function allows captured values to be frozen while the tool is moved, and reversed reading assists with mirrored or external angle checks. The compact format makes the gauge convenient for bench use and portable inspections, while the solid construction keeps readings reliable in standard manufacturing environments. If further clarification of measurement procedures is required, the technical specialists at Metav Werkzeuge provide application guidance and product specifications. Contact Metav Werkzeuge in Emmerich for tailored advice on the Metav IndustryLine M214.050 digital protractor or to request additional technical information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.050 GTIN: 4054469168128 Category: Angle measuring instruments Brand: Metav IndustryLine Facts Measuring range: 0–180° Resolution: 0.05° Dimensions: 120 x 150 mm Cross-section: 27.2 x 4 mm Material thickness: 4 mm Weight: 0.5 kg Tariff number: 90178090 Special features Stop and rail made of steel Digital display with ON/OFF, ZERO, HOLD/REV Integrated locking screw for fixed settings Compact, portable format suitable for workshop use FAQ What measuring range does the instrument cover? The M214.050 covers a measuring range of 0–180°, suitable for general angle setting and checking in machining and assembly tasks. How fine is the displayed resolution? The digital readout provides a resolution of 0.05°, enabling precise adjustments and small-angle settings. Can the angle be fixed after adjustment? Yes, the unit includes an integrated locking screw that secures the set angle for transfer or repetitive work. Which display functions are available? The display includes ON/OFF, ZERO and HOLD/REV controls for zeroing, freezing values and reversing the reading direction when required. Is the gauge suitable for portable inspections? With compact dimensions of 120 x 150 mm and a weight of about 0.5 kg, the device is designed for easy handling during bench and portable checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com