150mm Digital Caliper Large LCD 17mm Digits, Large Display, mm/inch, Four‑Function Measurement, Stainless Hardened Steel, DIN 862 - Metav IndustryLine
€32.00
Product information "150mm Digital Caliper Large LCD 17mm Digits, Large Display, mm/inch, Four‑Function Measurement, Stainless Hardened Steel, DIN 862 - Metav IndustryLine"
Take advantage of the combination of clear 17 mm digit readout, 0.01 mm resolution and a hardened stainless-steel build for reliable, repeatable measurements in the workshop; the caliper ships in a protective case and is available through Metav Werkzeuge or via consultation with our sales team.
Digital Caliper 150 mm M216.135 — Large 17 mm LCD, 0.01 mm resolution (Metav IndustryLine)
A Digital Caliper 150 mm that provides rapid, unambiguous readings and fourfold measuring capability for general workshop and production use
- Large 17 mm LCD for clear readout
- 0.01 mm resolution, DIN 862 compliance
- Hardened stainless-steel construction
- Fourfold measurement: inside, outside, depth, step
Faster decisions thanks to visibly clearer readouts
A large-format LCD with 17 mm digits puts measurement values instantly within view, reducing interpretation time and the risk of transcription errors. With a standard 0.01 mm resolution on the metric scale and a corresponding inch readout, the instrument enables immediate logging of dimensions for quality control routines. The clear control layout – ON/OFF, ZERO and mm/inch – supports rapid switching between tasks and formats, so operators spend less time setting up and more time producing reliable results.
Robust construction for consistent, long-term accuracy
The slider and jaws are manufactured from hardened stainless steel, chosen for wear resistance and corrosion protection in busy workshop environments. This construction promotes dimensional stability across repeated use and helps preserve the calibrated state of the measuring faces. Delivered in a protective case for safe transport and storage, the caliper is designed to withstand shop-floor handling while keeping the measuring surfaces clean and intact to maintain accuracy.
One tool, four measuring functions to simplify processes
Equipped for fourfold measurement—outside, inside, depth and step—the digital instrument replaces several single-purpose gauges and reduces the number of tool changes during inspection. The rapid mm/inch conversion and tactile function buttons allow smooth workflow integration when components or drawings require mixed units. With a 150 mm measuring range, this model fits the standard workshop category, offering the best balance of reach and rigidity for everyday tasks such as component checks, fixture set-up and incoming inspection.
Ready for industrial routine and straightforward integration
Compliant with DIN 862, the caliper is suited for general machine-shop metrology and routine quality assurance. Weighing around 0.45 kg, the instrument is robust yet manageable for single-handed operation during repetitive inspection cycles. The combination of visible digits, dependable electronics and hardened measuring faces supports faster measurement throughput and fewer rereads, which together contribute to improved productivity across production and maintenance processes.
Choose the Metav IndustryLine Digital Caliper for clear, repeatable measurements and contact Metav Werkzeuge for tailored advice or order coordination by phone +49 2822 7131930 or email info@metav-werkzeuge.com
Technical data
- Article number: M216.135
- GTIN: 4054469110509
- Measuring range: 0–150 mm
- Resolution: 0.01 mm / 0.0005 in
- Display: Large LCD, 17 mm digit height
Facts
- Weight: 0.45 kg
- Jaw length: 40 mm
- Power: 3 V battery
- Standard: DIN 862
- Tariff number: 90173000
Special features
- Material: hardened stainless steel
- Measurement modes: outside, inside, depth, step
- Controls: ON/OFF, ZERO, mm/inch
- Delivery: protective case included
- Category: Standard workshop caliper
FAQ
What measuring range does this caliper cover?
The caliper offers a measuring range of 0–150 mm suitable for standard workshop tasks and is supplied under the Metav IndustryLine designation M216.135.
Can the instrument measure in inches as well as millimetres?
Yes, the caliper features an mm/inch function allowing immediate conversion; the inch resolution is 0.0005 in.
Is the caliper suitable for routine quality checks in production?
The design, hardened stainless-steel measuring faces and DIN 862 compliance make this caliper well suited for everyday inspection and shop-floor quality control.
Does the device include depth and step measurement capabilities?
Yes, fourfold measurement is supported: outside, inside, depth and step measurements are all possible with this instrument.
How is the caliper protected during transport?
The instrument is delivered in a protective case to safeguard the jaws and electronics during storage and transport.
Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Designation: | Taschen-Messschieber |
|---|---|
| Material: | rostfreier Stahl, gehärtet |
| Meas.schnabel oben: | 21mm |
| Range: | 0-150mm |
| Range-1: | 150mm |
| Schnabellänge: | 40mm |
| Standard: | DIN 862 |
Accessory Items
Take advantage of the combination of consistent ±8 N force application and a low inertial mass for faster, more reproducible inline checks; order directly via Metav Werkzeuge or consult the team for integration advice. Force adapter for digital calipers M401.041 — ±8 N roller accessory (Metav IndustryLine) The force adapter for digital calipers M401.041 is an accessory that applies a controlled rolling force to a caliper jaw, designed to standardise contact pressure during comparative and serial measurements with digital calipers. Precise ±8 N measuring force Compatible with thumb‑roller calipers Lightweight — only 28 g Consistent contact pressure for repeatable measurement results A controlled contact force reduces operator‑dependent variability; the ±8 N specification ensures a uniform load that stabilises the measurement interface. By converting manual thumb pressure into a defined rolling force via the integrated roller, the accessory improves repeatability in production inspection and end‑of‑line checks. This stabilisation shortens decision cycles and lowers the rate of false rejects by making each contact between jaw and workpiece more consistent. Easy retrofit and minimal influence on handling Integration requires no complex setup: the adapter mounts to calipers with a thumb‑roller interface and keeps the original handling characteristics intact. The very low mass (approx. 28 g) means negligible added inertia, so short measuring strokes and tactile feel remain virtually unchanged. Compatibility with standard digital calipers allows existing instruments to be upgraded for force‑controlled measurements without replacing the measuring device, improving throughput while keeping investment low. Practical benefits for inspection and serial testing Using a dedicated force accessory speeds up repetitive measuring tasks by removing the need for operator training on applied pressure. The roller design preserves surface finish and prevents point loading on delicate parts while delivering a consistent contact condition for each cycle. Supplied as an accessory from Metav IndustryLine, the unit supports efficient workflows in workshop, toolroom and small‑scale production environments where reliable, repeatable contact force is required. For advice on fitting the adapter or to order the M401.041, contact Metav Werkzeuge GmbH in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — the Metav team will assist with integration and delivery options Technical data SKU: M401.041 GTIN: 4054469143651 Weight: 0.028 kg Tariff number: 90178090 Category: Accessory for measuring instruments Core measurements Measuring force: ±8 N Mass: 0.028 kg eCl@ss: 21160592 Special features Roller for consistent contact Compatible with digital calipers with thumb roller Accessory for serial and comparative measurement FAQ How does the adapter ensure consistent measurement force? The adapter applies a defined ±8 N rolling force through its roller mechanism, so each contact is made with reproducible pressure, reducing operator influence on readings. Can it be fitted to any digital caliper? The adapter is designed for calipers that use a thumb roller for jaw actuation; the M401.041 fits standard thumb‑roller interfaces used on many digital calipers. Does the adapter affect measurement speed or handling? The low mass (approx. 28 g) adds minimal inertia, preserving normal handling and allowing quick, repeatable measuring cycles without perceptible slowdown. Is the accessory suitable for delicate surface finishes? Yes, the roller distributes contact pressure and avoids point loading, helping to protect delicate surfaces while maintaining consistent contact conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com