150mm Digital Caliper Inductive System 0.01mm Resolution IP67, Three-Point Measurement, Supplied Calibrated in Case - Metav IndustryLine

Take advantage of the combination of IP67 protection, 0.01 mm resolution and hardened stainless‑steel construction for reliable, repeatable workshop measurements; order the M216.185 digital caliper directly via Metav Werkzeuge or ask our consultants if needed.

Digital Caliper M216.185 (150 mm) — Inductive measuring system, IP67

A Digital Caliper M216.185 designed for precise external, internal, depth and step measurements in machine shops and quality control environments, compliant with DIN 862

• IP67 protection for dust and water resistance
• High-resolution 0.01 mm readout, 0.0005 in display
• Inductive measuring system for robust operation
• Hardened stainless-steel construction for longevity

Robust protection that keeps inspections working

The combination of IP67 protection and stainless hardened steel construction ensures the instrument resists chip ingress and coolant splash, reducing downtime in busy workshop environments. This robustness is a practical benefit: measuring can continue at the machine or at the inspection bench without frequent cleaning or premature wear. The durable build maintains jaw geometry and alignment over time, which supports reproducible results and lowers the need for early replacement.

Practical versatility for everyday measurement tasks

Classified in the Standard measuring range (0–150 mm), the tool offers the best balance of reach and stiffness for general machining and metalwork tasks. With four measurement modes the instrument handles inside, outside, depth and step measurements, reducing the need for multiple gauges. The round depth rod (Ø 1.6 mm) and the proven jaw geometry deliver reliable contact for small recesses and stepped components, enabling efficient inspection of assemblies, fixtures and workpieces.

Clear digital readout and dependable measuring principle

A crisp digital display with mm/inch switching and MODE / 0 / ON‑OFF keys streamlines data capture and reduces interpretation errors on the shop floor. The caliper uses an inductive system, which is less vulnerable to surface contamination than optical encoders and supports stable readings in harsh conditions. The standard 0.01 mm resolution (0.0005 in) combines with simple zeroing functions and a locking screw to speed repetitive checks and to secure a measured value for transfer or documentation.

Designed for consistent shop performance

Weighing approximately 0.4 kg and conforming to DIN 862, this caliper is engineered for one‑hand handling while retaining sufficient mass for stable contact. The instrument suits routine quality control and machine‑shop inspection where a fine balance between reach and rigidity matters. Its features support a rational workflow: faster measurement cycles, fewer secondary tools and consistent output for production control or incoming inspection.

Contact Metav Werkzeuge for tailored advice or to reserve the M216.185 digital caliper for the workshop—phone +49 2822 7131930 or email info@metav-werkzeuge.com

Technical Data

• Article number: M216.185
• GTIN: 4054469146362
• Brand: Metav IndustryLine
• Standard: DIN 862
• Measuring system: inductive
• Protection rating: IP 67

Facts

• Measuring range: 0–150 mm
• Resolution: 0.01 mm / 0.0005 in
• Weight: 0.4 kg
• Round depth rod diameter: 1.6 mm
• Jaw lengths: 40/21 mm
• Tariff number: 90173000

Special features

• Digital display with MODE, mm/inch and 0/ON/OFF functions
• Four measurement functions: inside, outside, depth, step
• Locking screw for secure readings
• Hardened stainless-steel construction
• Compliant with DIN 862

FAQ

Which measurement tasks does this caliper cover?
The M216.185 digital caliper covers external, internal, depth and step measurements and is therefore suitable for general workshop inspection and fixture control.

Is the caliper suitable for use at the machine?
Yes; with an IP67 rating and an inductive measuring system, the caliper tolerates splash and contamination typically encountered beside machines.

What accuracy and resolution can be expected?
The instrument provides a resolution of 0.01 mm (0.0005 in) on the digital readout, matching common digital caliper standards for shop inspection.

Does the caliper conform to any standards?
The M216.185 is built to DIN 862 specifications for calipers, ensuring geometry and functional compatibility with workshop metrology practices.

How is the measured value secured for transfer?
A locking screw on the slider secures the jaw position so measurements can be recorded or transferred without drift.

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com