Ausstattungen für Fräsmaschinen

Take advantage of a robust heat-treated steel construction paired with a precise M24 x 3 mm pitch thread and a 200 mm overall length to ensure secure, repeatable clamping in demanding workshop and production environments. Order the clamping screw directly via Metav Werkzeuge or ask our consultants if needed. Clamping screw 1388M by Vertex — M24 x 3 mm pitch, 200 mm The clamping screw 1388M is a heavy-duty fastening element designed for secure fixture and reliable clamping in industrial and workshop applications. Heat-treated steel construction Precision M24 x 3 mm pitch thread 200 mm overall length Robust 0.6 kg mass Secure holding for repeatable setups A dependable clamping solution is essential for reproducible results on jigs, fixtures and modular workholding. The heat-treated steel body provides high resistance to deformation under load, which translates into stable clamping forces over repeated cycles. As a result, setup times are reduced and component alignment remains consistent, supporting uninterrupted production and lower scrap rates. The combination of mass and material also minimises vibration during machining, improving surface finish and process reliability. Accurate thread for precise positioning The M24 x 3 mm pitch metric thread delivers fine axial adjustment and secure engagement in threaded receivers. Fine-pitch threads convert smaller rotational inputs into precise linear movement, enabling exact clamping depth and repeatable torque application. For applications where consistent preload is required, the defined pitch and robust thread form reduce the risk of loosening and ensure predictable clamping behaviour. The fastening element’s geometry supports controlled torque application and straightforward maintenance procedures. Built for durability and low maintenance Constructed from heat-treated steel and weighing 0.6 kg, this clamping fastener is engineered for long service life under industrial use. Heat treatment increases surface hardness and fatigue strength, extending intervals between replacements and reducing total cost of ownership. The 200 mm length offers ample engagement for thicker workpieces or deep fixture threads. Where corrosion or specialised environments are a concern, material choice and surface treatments should be considered; Vertex components are designed to integrate with standard workholding systems and routine inspection schedules to maintain performance. For tailored advice on integrating Vertex clamping solutions into existing fixtures and for reliable supply from Metav Werkzeuge in Emmerich, contact our product consultants for detailed recommendations and order support Technical Data Article number: 1388M GTIN: 4061905091551 Manufacturer: Vertex Core measurements Length: 200 mm Weight: 0.6 kg Thread: M24 x 3 mm pitch Special features Material: Heat-treated steel eClass: 21022190 Category: Clamping screw FAQ What materials is this clamping screw suitable for? The clamping screw 1388M, manufactured by Vertex, is designed as a general-purpose clamping element; suitability depends on the fixture and mating components rather than a single workpiece material. How is the thread specified and what does it mean? The thread is metric M24 x 3 mm pitch, which denotes a 24 mm nominal diameter with a 3 mm axial pitch for each full turn, providing fine linear adjustment. What maintenance does the clamping screw require? Routine inspection for thread wear and lubrication of the mating threads prolongs service life; Vertex clamping components benefit from scheduled checks in high-duty environments. Can this fastening element be used in precision fixtures? Yes. The 1388M fastener’s fine pitch and stable, heat-treated construction make it suitable for precision fixtures where repeatable clamping and low backlash are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust heat-treated steel, a secure M10 x 1.5 thread and an extended 200 mm length for reliable clamping and reduced rework; order directly via Metav Werkzeuge or consult the team for application advice. Clamping screw 1338M — Vertex clamping screw with M10 x 1.5 thread and 200 mm length A durable clamping screw engineered for secure fixtures and routine use in jigs, fixturing systems and workshop assemblies. Heat-treated steel core for long service life M10 x 1.5 threaded shaft for secure fixing 200 mm length for extended reach Precision-manufactured Vertex component Dependable clamping performance for production environments The heat-treated steel construction delivers high fatigue resistance and stable clamping force over repeated cycles, which helps minimise slippage and component movement during machining or assembly. The M10 x 1.5 thread provides a fine-pitch engagement that increases clamping accuracy and reduces the risk of loosening under vibration. This combination translates into fewer setup repeats and a steadier production flow, supporting throughput goals and consistent part quality. Compatibility and straightforward integration with existing fixtures Designed as a standard clamping element, the component fits common metric threaded holes and adaptors used across workshop and industrial fixtures. The 200 mm length gives extra reach for deeper jigs or stacked clamping arrangements without compromising lever control. Thread specification and dimensional consistency support predictable torque behaviour, simplifying torque setting and tool selection for assembly stations and CNC fixturing. Durability that cuts downtime and maintenance Manufactured to Vertex standards, the fastener resists wear and maintains thread integrity under frequent tightening cycles, reducing replacements and maintenance interventions. The modest mass and compact profile ensure quick handling at the bench or on automated lines, while material processing contributes to stable mechanical properties over time. The result is improved uptime and less unplanned stoppage for tool replacement or rework. Choose the Vertex clamping screw 1338M for dependable fixture performance — contact Metav Werkzeuge in Emmerich for tailored technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 1338M GTIN: 4061905087073 Manufacturer: Vertex Facts Length: 200 mm Weight: 0.1 kg Thread: M10 x 1.5 Special features Material: heat-treated steel ECLASS: 21022190 Brand: Vertex FAQ Are these screws suitable for heavy-duty clamping? The Vertex clamping screw (SKU 1338M) is made from heat-treated steel and is intended for robust clamping duties in many workshop and light industrial applications. What does the M10 x 1.5 thread mean for assembly? M10 x 1.5 indicates a metric thread with a 10 mm nominal diameter and 1.5 mm pitch; the specification supports fine engagement and predictable torque behaviour for fixture assemblies. Is the length of 200 mm measured overall or from the thread base? The 200 mm length refers to the overall length of the clamping screw as supplied in the Vertex specification. How does the material choice affect longevity? Heat-treated steel increases wear resistance and fatigue strength, extending service life and reducing the frequency of replacements for clamping components. Can these clamping screws be used with standard metric nuts and tapped holes? Yes, the thread form and dimensions conform to common metric standards and are compatible with standard M10 fittings and tapped holes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking into account robust construction, precise thread specification and convenient length, this clamping solution promotes consistent fixture performance and reduced downtime; order the item directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw 1348M — heat-treated steel, M12x1.75 thread (Vertex) A durable clamping screw engineered for secure fastening in jigs, fixtures and general workshop clamping tasks. Heat-treated steel construction Thread M12x1.75 for secure engagement 200 mm overall length for deep reach Lightweight at 0.15 kg for easy handling Engineered for dependable, repeatable clamping The robust, heat-treated steel body delivers high fatigue resistance and sustained clamping force, ensuring fixtures remain stable during machining and assembly. With a defined M12x1.75 thread profile, the component provides reliable engagement with standard nuts and threaded holes, reducing the risk of loosening under vibration. This mechanical predictability translates into fewer interruptions on the shop floor and a measurable improvement in cycle-time reliability. Designed for versatile workshop and fixture use A 200 mm overall length offers extended reach for deep-set clamps and bespoke jig arrangements, while the modest mass of 0.15 kg keeps handling comfortable during frequent set-ups. The metric thread compatibility supports integration with common clamping plates and threaded bosses, so retrofitting into existing systems is straightforward. The simple geometry makes inspection and maintenance fast, lowering the time needed for pre-shift checks and tool changes. Practical benefits explained for non-specialists The standardised M12x1.75 designation indicates thread diameter and pitch, a specification that ensures interchangeability across suppliers and components. Choosing a screw manufactured from heat-treated steel means the part has undergone controlled hardening to improve strength without becoming brittle; this balance is essential where repeat tightening and release are required. For operations seeking consistent clamping without frequent replacement, this component represents a pragmatic balance of durability and serviceability. Quality assurance and supply confidence Produced by Vertex and identified as SKU 1348M, the component is suitable for use in demanding workshop environments where reliability matters. Sourcing via Metav Werkzeuge provides the added assurance of a European quality filter and prompt logistic support from Emmerich, backed by decades of distribution experience. This supply chain reliability reduces procurement risk and contributes to predictable production scheduling. Choose the Vertex clamping screw for proven durability and compatibility — contact Metav Werkzeuge for application guidance and secure procurement from our Emmerich stock Technical Data SKU: 1348M GTIN: 4061905090240 Manufacturer: Vertex Measurements Length: 200 mm Weight: 0.15 kg Thread: M12x1.75P Materials & Features Heat-treated steel Eclass: 21022190 Suitable for general clamping applications FAQ What materials is this clamping screw made from? The clamping screw is manufactured from heat-treated steel, providing enhanced strength and wear resistance for industrial clamping tasks. Which thread specification does the component use? The product features an M12x1.75 thread, a common metric pitch that ensures compatibility with standard nuts and threaded fixtures. Is the length suitable for deep clamping setups? With a 200 mm overall length, the screw is designed to reach into deeper jigs and fixtures where standard fasteners are too short. Who manufactures this clamping screw and how is it identified? This component is produced by Vertex and sold under SKU 1348M, facilitating traceability and consistent quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine the heat-treated steel construction with a M16 x 2 mm precision thread and a 200 mm length for dependable deep clamping and consistent fixture performance; order the clamping screw directly via Metav Werkzeuge or consult our advisors if further specification is required. Clamping screw 1358M – M16 x 2 mm thread, 200 mm length (Vertex) A Clamping screw 1358M engineered for secure fixture and deep clamping in machine vices and production jigs. Heat-treated steel construction M16 x 2 mm precision thread 200 mm overall length for deep clamping Suitable for machine vices and fixtures Reliable clamping that reduces downtime The robust design of this fastening element delivers consistent clamping force, minimising rework and machine stoppages. The M16 x 2 mm metric thread provides a fine pitch that allows accurate axial adjustment with predictable torque behaviour; this results in repeatable setups and fewer adjustments between jobs. The heat-treated steel body increases resistance to wear and deformation under load, which contributes to a longer service life compared with untreated fasteners. For production environments where repeatability and uptime are priorities, the combination of fine-thread geometry and a hardened component yields measurable improvements in fixture stability and process reliability. Deep reach for versatile fixturing A 200 mm overall length enables secure engagement in deeper vises and bespoke fixtures without the need for added extensions or adapters. The extended reach supports clamping of larger or irregularly shaped workpieces while keeping the clamping point accessible and stable. Using a single long shank fastener reduces the number of intermediate parts, streamlines the setup process and improves operator ergonomics during repeated clamping cycles. The result is a cleaner workflow and faster part changes in both individual and batch production contexts, where minimising auxiliary components directly benefits cycle time. Durable performance and workshop suitability Manufactured to Vertex standards, this fastener is intended for demanding workshop and industrial applications where mechanical stress and frequent use are expected. The material choice and heat treatment enhance resistance to surface fatigue and maintain thread integrity under cyclical loading. Maintenance requirements are therefore reduced, supporting predictable inventories and less frequent replacement. Delivered as a compact, easy-to-handle component, the part integrates with standard metric tooling and clamps and aligns with common workshop practices for installation and inspection, facilitating quick adoption into established processes. Contact Metav Werkzeuge in Emmerich for tailored advice on Vertex clamping solutions and to arrange reliable European delivery Technical data SKU: 1358M GTIN: 4061905088827 Manufacturer: Vertex Material: Heat-treated steel Thread: M16 x 2 mm Length: 200 mm Weight: 0.25 kg Facts Length: 200 mm Weight: 0.25 kg Thread pitch: 2 mm Special features Clamping screw design Heat-treated for wear resistance Metric fine thread for precise adjustment Suitable for fixtures and machine vices FAQ What material is the clamping screw made from? The clamping screw 1358M is manufactured from heat-treated steel to provide enhanced wear resistance and dimensional stability under load. What is the thread specification for this fastener? The fastener uses a metric M16 x 2 mm thread for fine-pitch adjustment and predictable torque response. Can this screw be used for deep clamping applications? Yes, the 200 mm overall length of the 1358M makes it suitable for deep clamping in vises and specialised fixtures. Is the product suitable for repeated industrial use? Vertex designed this clamping screw for workshop and industrial environments; the heat-treated construction supports repeated cycles with reduced wear. What are the key dimensions and weight of the part? The part is 200 mm long and weighs 0.25 kg; thread pitch is 2 mm (metric fine thread). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of heat-treated steel strength and a metric M20 × 2.5 thread for reliable, repeatable clamping in demanding production environments; order the clamping solution directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw 1378M — M20 × 2.5 thread, 200 mm, Vertex The clamping screw 1378M is a heavy-duty clamping bolt designed for secure workholding and repeatable positioning in industrial fixtures and jigs. Heat-treated steel construction Metric M20 × 2.5 thread 200 mm overall length Designed for heavy-duty clamping Consistent clamping force for repeatable setups The heat treatment of the main component provides enhanced strength and wear resistance, which results in consistent clamping behaviour over many cycles. With a metric M20 × 2.5 thread and a 200 mm overall length, the component delivers predictable engagement and allows concise positioning in modular fixtures. This mechanical reliability reduces setup variability and contributes to shorter adjustment times in series production, improving throughput without sacrificing accuracy. Robust material choice that reduces maintenance Constructed from heat-treated steel, the clamping bolt offers a favourable balance between toughness and dimensional stability. The material choice minimises plastic deformation under load and extends service life compared with untreated fasteners. For maintenance planning, the component’s predictable durability simplifies spare-part stocking and reduces unplanned downtime in workshops and on the production floor, supporting efficient asset management. Simple specification for broad integration The clear specification—M20 × 2.5 thread, 200 mm length and an approximate mass of 0.4 kg—facilitates selection and integration into existing assemblies and workholding plates. The straightforward geometry supports common tooling standards, enabling fast replacement and interchangeability in clamping systems. Where process reliability is essential, this mechanical solution helps to standardise fixturing procedures and enhances overall process control. Choose Vertex quality for dependable workholding — contact Metav Werkzeuge in Emmerich for procurement and technical matching to existing fixtures. Technical data SKU: 1378M GTIN: 4061905088834 Manufacturer: Vertex ECLASS: 21022190 Numbers / Core technical data Length: 200 mm Weight: 0.4 kg Thread: M20 x 2.5 Special features Material: Heat-treated steel Brand: Vertex Intended use: Clamping / workholding component FAQ What is the thread specification of this clamping component? The clamping screw 1378M from Vertex is supplied with a metric M20 × 2.5 thread. What material is used for the clamping bolt? The 1378M is manufactured from heat-treated steel, chosen for strength and dimensional stability. Is the length suitable for standard fixtures? The overall length of 200 mm is compatible with many common jigs and fixture plates, allowing straightforward integration. How heavy is the clamping bolt? The item has an approximate mass of 0.4 kg, which aids in handling and planning for inventory. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of durable heat-treated steel, a standard M8 × 1.25 metric thread and a long 200 mm reach for reliable fixture clamping; order the clamping screws directly via Metav Werkzeuge or ask our consultants if needed. Clamping Screws 1328M — M8 × 1.25 thread, 200 mm, Vertex The Clamping Screws 1328M are robust fastening elements engineered for secure clamping in workshop fixtures, jigs and general industrial clamping tasks Heat-treated steel construction M8 × 1.25 metric thread 200 mm length for deep clamping Compact weight of 0.07 kg per piece Engineered for dependable fixture clamping The long shank and standard metric thread deliver precise axial adjustment for secure holding in assemblies where repeatable positioning matters. With an extended 200 mm length, the component reaches into deeper fixture beds or through thicker workpieces while the M8 × 1.25 thread provides a balance between coarse strength and fine adjustment. This combination reduces the need for auxiliary spacers and supports consistent clamping force across repetitive setups, aiding production reliability and measurable process stability. Durability through controlled heat treatment Made from heat-treated steel, the fastener is designed to withstand the mechanical stresses typical of industrial clamping operations. The thermal treatment increases tensile strength and wear resistance, which translates into longer in-service intervals and fewer replacements. Supplied by Vertex, the component matches workshop expectations for robust materials and predictable mechanical behaviour, supporting a maintenance strategy that prioritises uptime and dependable fixture performance. Designed for versatile workshop integration The metric M8 × 1.25 thread is a widely used standard, enabling straightforward replacement and compatibility with common nuts, threaded inserts and tapped holes. The extended 200 mm length suits a variety of fixtures and jigs, from machining set-ups to assembly benches, allowing integration without major design changes. The relatively low mass of 0.07 kg per item keeps handling and fixturing simple while maintaining the mechanical presence required for effective clamping. Low-maintenance handling and predictable spare-part supply The straightforward material and standard thread geometry mean inspection and replacement are simple tasks within routine workshop maintenance. Standardised specifications ease procurement and stock management, reducing downtime caused by non-matching fasteners. The component’s clear technical specification supports inventory control and makes it easy to identify matching replacements, ensuring that fixtures remain serviceable with minimal administrative effort. Contact Metav Werkzeuge in Emmerich for stock availability and technical advice, quoting SKU 1328M to ensure the correct clamping solution for the application Technical data SKU: 1328M GTIN: 4061905093265 ECLASS: 21022190 Manufacturer: Vertex Core data Length: 200 mm Thread: M8 × 1.25 Weight: 0.07 kg Materials & features Material: Heat-treated steel Application: Clamping fixtures and jigs Design: Long shank for deep reach FAQ What is the exact thread specification of these clamping screws? The clamping screws feature an M8 × 1.25 metric thread, specified for the Clamping Screws 1328M by Vertex. What is the overall length and mass of the fastening element? The fastener is 200 mm long and has a weight of approximately 0.07 kg per piece. What material are the screws made from and why is that relevant? They are manufactured from heat-treated steel, which provides improved tensile strength and wear resistance for demanding clamping tasks. Are these screws suitable for standard workshop fixtures and jigs? Yes, the M8 × 1.25 metric thread and 200 mm length make the screws suitable for a wide range of fixtures and jigs commonly used in workshops. How should the part be specified when ordering replacements? Specify the Vertex Clamping Screws 1328M and include the SKU 1328M and GTIN 4061905093265 to ensure an exact match. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust ingress protection, flexible positioning and multi-voltage operation for consistent inspection lighting in demanding workshop environments. Order the unit directly via Metav Werkzeuge or contact our consultants for specification advice. VHL-3001/2MR Halogen lamp — dust-protected inspection light with 200 mm arm The VHL-3001/2MR is a dust-protected halogen lamp designed for precise visual inspection and bench work; fitted with a 200 mm articulated arm for accurate alignment. Robust IP67 light head, arm IP65 protection 200 mm articulated arm for precise positioning Selectable voltage: 110/220/380/24 V Incl. 1.8 m connection cable for quick setup Consistent, high-contrast illumination for inspection tasks The halogen head delivers a continuous, high-contrast beam that supports detailed visual work and reduces the need for repeated rechecks. Built with IP67 protection at the light and IP65 for the arm, the lamp maintains reliable performance in dusty or damp workshop zones. Compatibility with 50/55/70 W bulbs allows selection of the luminous intensity required for measuring or assembly stations, so inspection accuracy is improved and measurement-related rework is minimised. Designed for industrial benches and production lines The fixture accepts multiple supply options (110/220/380/24 V), which simplifies integration into varied electrical environments without additional transformers. The 200 mm arm and stable mounting provide precise, vibration-resistant positioning while the 3.4 kg mass contributes to overall steadiness. These characteristics make the unit suitable for repetitive manufacturing tasks and quality-control benches where stable, repeatable lighting reduces cycle time and enhances throughput. Quick integration, low-maintenance operation Installation is straightforward: the lamp is supplied with a 1.8 m cable and accepts common bulb ratings, enabling rapid commissioning at the workbench. The dust-protected design and robust construction reduce maintenance intervals and downtime, while the articulated arm allows fast repositioning for different components or measuring tools. As a compact inspection light from Vertex, the model offers long-term operational reliability and straightforward replacement of consumables. Contact Metav Werkzeuge in Emmerich for technical specification and supply of the Vertex VHL-3001/2MR — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and swift delivery Technical data SKU: VHL-3001/2MR GTIN: 4061905092077 Manufacturer: Vertex Type: Halogen lamp, dust-protected Ingress protection: Light head IP67; arm IP65 Power options: 110/220/380/24 V Included accessory: Cable 1.8 m Facts Weight: 3.4 kg Arm length: 200 mm Compatible bulb ratings: 50 W / 55 W / 70 W Special features Articulated arm for precise alignment Robust construction for workshop use Rapid integration via included cable Suitable for inspection and assembly stations FAQ What power supplies are supported by this inspection lamp? The Vertex VHL-3001/2MR supports 110 V, 220 V, 380 V and 24 V, enabling installation in a variety of electrical systems. Is the lamp suitable for dusty production environments? Yes, the light head is rated IP67 and the arm IP65, so the unit is dust-protected and designed for harsh workshop conditions. Which bulb types can be used with this lamp? The lamp is compatible with 50 W, 55 W and 70 W halogen bulbs; this allows adjustment of brightness to the specific inspection task. Does the product include a cable for connection? The VHL-3001/2MR is supplied with a 1.8 m connection cable for immediate commissioning. How does the articulated arm benefit precision work? The 200 mm articulated arm permits fine positional adjustment of the light source, enabling repeatable alignment that supports accurate visual inspection and measurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of hardened construction and an L‑profile that raises the clamping plane to expand machining options while maintaining precision and repeatability; compatibility with VQC clamping systems ensures straightforward integration on existing benches. Order the hardened L‑jaws directly via Metav Werkzeuge or ask our consultants if needed. VQC-200L-MJL Hard L‑Jaws for VQC vises — hardened, 200 x 98 x 70 mm (Vertex) A hardened set of L‑profile jaws, the VQC-200L-MJL complements VQC vises to enable raised or offset clamping for irregular and thin workpieces. Hardened steel for long wear Raised L‑profile for offset clamping Compatible with VQC vises for precise alignment Better access and stable clamping for complex parts The hardened L‑profile provides a raised clamping surface that simplifies handling of uneven or thin components, reducing the need for packing and repeat setups. By lifting the workpiece above the standard vice jaws, the accessory enables access to features that would otherwise be obstructed, improving machining flexibility. The robust design minimises deformation under load, supporting consistent clamping force and thus contributing to repeatable machining results. Durability reduces downtime and total cost of ownership Manufactured as a hardened accessory, the jaws withstand extended use in demanding environments, which reduces the frequency of replacements. The hardening treatment increases wear resistance while preserving the jaw geometry that matters for accurate seating. This contributes directly to operational efficiency and lowers maintenance cycles—an economic advantage for production and maintenance departments seeking reliable clamping solutions. Seamless fit with VQC systems for quick installation Designed specifically for VQC vises, the jaws match the mounting geometry of the series to ensure correct alignment and straightforward installation. Compatibility with established clamping systems shortens setup time and eliminates the need for custom adapters, enabling faster changeovers on the shopfloor. The measured dimensions of 200 x 98 x 70 mm and a mass of 7.69 kg support predictable handling and balance during fitting. Practical handling and application guidance The L‑shape profile is particularly useful for gripping parts with grooves, flanges or thin walls where conventional flat jaws struggle to hold securely. Use the accessory as part of a modular clamping strategy to reduce secondary operations and fixtures. When replaced or repositioned, the hardened surfaces preserve seating accuracy, maintaining the precision expected from Vertex clamping components. Contact Metav Werkzeuge to discuss suitability for specific fixtures and to request procurement advice for Vertex hardened L‑jaws for VQC vises — our consultants at Metav Werkzeuge are available to clarify fitment and application details. Technical data Article number: VQC-200L-MJL GTIN: 4061905090394 Manufacturer: Vertex Facts Dimensions: 200 x 98 x 70 mm Weight: 7.69 kg eClass: 21029107 Special features Hardened L‑profile jaws for raised clamping Designed for VQC vises SKU: VQC-200L-MJL FAQ What machines are these jaws compatible with? The hardened L‑jaws are designed for use with VQC vises and match the mounting geometry of the VQC series for direct fitment. Can these jaws be used for delicate or thin-walled components? Yes, the raised L‑profile of the VQC-200L-MJL is suited to thin or flanged parts, allowing secure clamping without the need for extensive packing or special fixtures. How does hardening affect service life? The hardening treatment of these jaws increases wear resistance and preserves jaw geometry, thereby extending service life and reducing replacement frequency for Vertex clamping accessories. Are these jaws heavy to handle during setup? With a weight of 7.69 kg, the unit is substantial but manageable for standard workshop handling; the mass contributes to stable seating and predictable balance during installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust clamping profile, a precise fit for VQC vises and stable support thanks to compact dimensions; order directly via Metav Werkzeuge or consult our specialists for exact application advice. VQC-200L-FJL Hard L‑Jaws for VQC vises — 200 × 102 × 70 mm, 7.92 kg (Vertex) A pair of hard L‑jaws engineered to deliver repeatable clamping performance for VQC vises in machine shops and production cells, optimised for stability and consistent reference surfaces. Hard L‑jaw profile for robust clamping Compatible with VQC vises Dimensions 200 × 102 × 70 mm Weight 7.92 kg for stable setup Durable clamping that preserves part geometry The VQC-200L-FJL adopts a hardened L‑profile that concentrates clamping forces where they matter, reducing elastic distortion of the workpiece and helping to maintain tight tolerances during machining. This configuration supports clamping accuracy over repeated setups, which is especially valuable for batch production and precision grinding operations. The design prioritises repeatability rather than decorative finish, giving a pragmatic solution for engineering environments. Predictable reference surfaces and vibration damping Measured 200 × 102 × 70 mm and weighing 7.92 kg, these jaws provide a stable contact area that reduces chatter and improves surface quality during cutting or finishing operations. The defined dimensions establish a reliable datum for alignment tasks and fixture planning, simplifying CAM setups and inspection procedures. The mass of the jaws contributes to vibration damping, which can extend tool life and lower scrap rates in routine machining. Seamless integration into VQC clamping systems Designed for use with VQC vises, the hard L‑jaw geometry fits existing mounting interfaces to streamline installation and inventory management. The focus on functional compatibility and robust construction reduces downtime and supports lean stocking strategies in workrooms. As a Vertex component, the jaws complement a workshop’s existing clamping ecosystem by offering a practical, mechanically focused upgrade for demanding applications. For reliable workshop clamping with Vertex components, contact Metav Werkzeuge for availability and technical guidance — stock and expert advice are available from our Emmerich location at info@metav-werkzeuge.com or by phone via our sales team. Technical data Article number: VQC-200L-FJL GTIN: 4061905088094 Manufacturer: Vertex Facts Dimensions: 200 × 102 × 70 mm Weight: 7.92 kg ECLASS: 21029107 Special features Hard L‑jaw design For VQC vises SKU: VQC-200L-FJL FAQ Which vises are these jaws compatible with? These jaws are designed for VQC vises and will fit standard VQC clamping interfaces; the product is listed as VQC-200L-FJL and manufactured by Vertex. What are the exact dimensions and weight? Dimensions are 200 × 102 × 70 mm and the weight is 7.92 kg, giving a compact, stable jaw suitable for precision clamping tasks. Do these jaws improve repeatability in batch production? Yes, the hard L‑jaw geometry provides consistent contact points and repeatable clamping, supporting tighter tolerances across multiple setups. Are these jaws suitable for heavy-duty machining? The design emphasises robust clamping and stable reference surfaces, making them appropriate for demanding workshop and production applications when used with matching VQC vises. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a high‑force, precision workholding solution that combines 9,000 kgf clamping force, 0.01 mm repeatability and robust cast‑iron construction for reliable machining results; order the vice directly via Metav Werkzeuge or consult our specialists for application advice. VMC-8P Pneumatic Precision Machine Vice by Vertex — 9,000 kgf, 0–200 mm opening The VMC-8P is a pneumatically actuated precision machine vice designed for secure, repeatable clamping in milling centres and CNC machining applications 9,000 kgf clamping force Opening range 0–200 mm Cast iron body for high rigidity Accuracy 0.01 mm repeatability Consistent heavy‑duty clamping for demanding machining The vice offers a 9,000 kgf clamping force, delivering stable holding for heavy cutting and interrupted cuts; this reduces micro‑movement, lowers the risk of chatter and contributes to longer tool life. The high clamping force, combined with a precision‑ground jaw interface, translates into measurable improvements in surface finish and dimensional stability. Engineers benefit from a predictable setup that minimises rework and optimises throughput, while production planners gain from a workholding solution that supports repeatable results across serial runs. The emphasis is on dependable, quantifiable performance rather than marketing hyperbole. Pneumatic actuation for rapid, repeatable cycles Pneumatic operation provides fast, uniform closing and opening cycles that integrate smoothly with automated workflows and tool‑change routines. The pneumatic actuation ensures consistent pressure application with minimal manual intervention, which is especially valuable in multi‑fixture setups or lights‑out machining. Repeatability at 0.01 mm level means part repositioning and unclamping do not introduce significant variation, aiding processes that require interchangeability. For process engineers, the combination of speed and repeatability equates to reduced cycle times and improved overall equipment effectiveness. Rigid construction and compact footprint for stable setups Constructed from cast iron, the vice body offers inherent damping and rigidity that counteracts cutting forces and helps maintain clamping integrity. With a compact footprint of 200 x 610 x 173 mm and a mass of 74 kg, the unit provides a stable base without occupying excessive table area, making it suitable for both single‑station fixtures and multi‑vice configurations. The 0–200 mm opening range covers a broad spectrum of component sizes, while the robust build supports continuous shop‑floor use with minimal maintenance. The design focus is longevity and precision retention under regular production loads. For tailored application advice or to request supply of the Vertex VMC-8P via Metav Werkzeuge, contact our team in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, specialist support and reliable delivery Technical data SKU: VMC-8P GTIN: 4061905091933 Brand: Vertex ECLASS: 21020601 ETIM: EC002173 Key figures Opening range: 0–200 mm Clamping force: 9,000 kgf Accuracy: 0.01 mm Weight: 74 kg Dimensions: 200 x 610 x 173 mm Materials & features Material: cast iron Actuation: pneumatic Type: Pneumatic precision machine vice SKU: VMC-8P FAQ What clamping force does the vice provide? The vice delivers a clamping force of 9,000 kgf, which ensures secure holding during heavy milling; this specification refers to the Vertex VMC-8P pneumatic machine vice. What is the usable jaw opening of the unit? The VMC-8P offers an opening range of 0–200 mm, allowing accommodation of a wide variety of component sizes in standard machining setups. How precise is the positioning and repeatability? Repeatability is specified at 0.01 mm, providing the precision required for serial production and tight‑tolerance machining with the Vertex VMC-8P. What is the construction material and why does it matter? The body is made from cast iron, chosen for its rigidity and vibration damping; this improves clamping stability and contributes to consistent machining results with the VMC-8P. Is the vice suitable for integration with CNC workflows? Yes; pneumatic actuation and compact dimensions make the vice suitable for CNC integration, enabling fast, repeatable cycles and straightforward fixture design with the VMC-8P. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise alignment and a matched, workshop-ready kit for consistent setups and reduced rework. The combination of 0.01 mm accuracy, standard 200 mm lengths and robust, matched parallels ensures reliable clamping and repeatability across milling and inspection tasks. Order the Precision Parallel Block Set VP-033 directly via Metav Werkzeuge or consult our specialists for configuration advice. Precision Parallel Block Set VP-033 by Vertex — 0.01 mm accuracy, 200 mm parallels A Precision Parallel Block Set VP-033 designed for reliable workpiece levelling and clamping in milling, drilling and inspection applications across toolrooms and general workshops. *High accuracy 0.01 mm *Long 200 mm parallels for stable support *Matched set with clamping brackets Consistent alignment for precision machining Precision on the machine bed begins with consistent support. The set delivers 0.01 mm tolerance across its parallels, providing a measurable reduction in setup variation and minimising rework. Each parallel is produced for even contact and flatness, translating directly into improved surface finish and dimensional stability during cutting or inspection. Described tolerance values allow straightforward process planning and easier verification against inspection criteria, making the set suitable where reproducible results are required. Matched components for repeatable setups The kit comprises parallels in several widths with a uniform length of 200 mm, together with matching clamping brackets to form stable reference points for vice and fixture work. This matched configuration removes guesswork during setup, shortens machine downtime between jobs and supports modular fixturing concepts. The construction supports routine shop use and aligns with systematic workflow approaches, offering practical benefits for batch production and prototype runs where repeatability is essential. Practical integration and trusted origin Designed for straightforward adoption on the shop floor, the parallels are compatible with common vices, fixture systems and inspection benches, enabling fast integration into existing processes. Sourced from Vertex, the set benefits from established manufacturing standards and quality control that support dependable performance. The design emphasises functional utility and reduces handling complexity, which helps maintain throughput while safeguarding measurement integrity in everyday use. Contact Metav Werkzeuge in Emmerich to request tailored advice, check availability of Vertex accessories and secure the VP-033 precision parallel block set for immediate integration into production. Technical Data Article number: VP-033 GTIN: 4061905089015 Manufacturer: Vertex Core data Dimensions (packaging): 340 x 223 x 85 mm Accuracy: 0.01 mm Weight: 6.4 kg Pieces per set: 8 Contents / Special features Contents: precision parallels in various widths, all 200 mm length, plus clamping brackets Set: matched components for repeatable setups Brand: Vertex FAQ What accuracy can be expected when using this parallel set? The VP-033 precision parallel block set from Vertex is specified with an accuracy of 0.01 mm, ensuring reliable reference surfaces for machining and inspection. Which applications are suitable for these parallels? These parallels are intended for workpiece levelling and support in milling, drilling and inspection operations, providing consistent alignment for both production and toolroom tasks. Are the parallels compatible with standard vices and fixtures? Yes. The design of the parallels and included clamping brackets allows straightforward use with common vices and fixture systems on the shop floor. How does the matched set improve setup times? Matched parallels and brackets eliminate the need for individual matching and adjustment during each setup, reducing changeover time and increasing repeatability between jobs. Is this a complete kit for basic parallel support? The VP-033 set contains a range of widths in a uniform 200 mm length and includes clamping brackets, providing a practical kit for typical support and levelling tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

High-repeatability clamping is achieved by the self-centring three-jaw mechanism combined with a 200 mm nominal diameter and a sturdy 16 kg mass, ensuring stable machining and reduced setup time. Order the VSK-8A chuck directly via Metav Werkzeuge or ask our consultants if needed. VSK-8A 3-jaw self-centring reversible chuck, 200 mm — Vertex The VSK-8A is a three-jaw, self-centring and reversible chuck engineered for secure workholding in turning and medium- to heavy-duty lathe operations. Self-centring three-jaw mechanism Reversible operation for internal and external clamping 200 mm nominal diameter for larger workpieces Robust 16 kg mass for increased stability Consistent concentricity for predictable results A self-centring three-jaw design synchronises the jaw movement so that round and indexed parts are clamped to the same centre every cycle, reducing repositioning and inspection time. This concentric clamping principle leads to improved repeatability on batch runs and fewer scrapped parts. The 200 mm nominal diameter expands the usable clamping envelope, permitting larger diameters to be held without additional adapters. For users unfamiliar with the term, self-centring means the jaws move simultaneously, aligning the workpiece to the chuck axis automatically, which simplifies setup and lowers operator dependency. Versatile clamping to reduce tooling complexity A reversible chuck enables both external gripping and internal chucking without swapping the primary workholding system, which shortens changeover intervals and reduces the number of separate fixtures required in the tooling cabinet. The design described as reversible supports internal holding of hollow components as well as robust external jaws for solid stock. The provided 3xM12 mounting thread ensures a secure connection to a lathe spindle or backplate, maintaining the required rigidity during higher cutting loads. This capability translates directly into fewer interruptions and a more efficient production flow. Mass and dimensions that improve surface finish and rigidity The chuck’s 16 kg mass contributes inertia that dampens vibration during cutting, which in turn helps to improve surface finish and tool life on demanding operations. A height of 109 mm provides a compact yet rigid profile that integrates easily with many lathe configurations while maintaining access for tooling and measurement. Together, the mass and dimensions support stable holding under variable axial and radial forces, making the unit suitable where consistent clamp stability matters. The overall build quality is aimed at industrial use where robustness and repeatable performance are valued. For robust, repeatable workholding with Vertex quality, contact Metav Werkzeuge in Emmerich for tailored procurement and technical consultation — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VSK-8A GTIN: 4061905089732 Manufacturer: Vertex Facts Diameter: 200 mm Height: 109 mm Weight: 16 kg Mounting thread: 3xM12 eClass: 21020590 Special features Three-jaw, self-centring and reversible chuck Reversible function for internal and external clamping Designed for lathe workholding applications Brand: Vertex FAQ What nominal diameter does the chuck support? The chuck supports a nominal diameter of 200 mm, suitable for larger turned components and extended clamping envelopes. Can the chuck be used for internal clamping? Yes, the reversible design permits internal clamping as well as external gripping, allowing flexible use without multiple chucks. How is the chuck mounted to a spindle or backplate? Mounting is via the provided 3xM12 thread configuration; secure attachment ensures rigidity under cutting loads. Does the chuck provide improved vibration damping? The substantial mass of 16 kg increases inertia and contributes to vibration damping, which can enhance surface finish and tool life. What does self-centring mean in practical terms? Self-centring means the jaws move simultaneously to align the workpiece automatically to the chuck axis, reducing setup steps and improving repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of a compact footprint, robust mass and precise indexing, this device ensures reproducible angular positioning for milling and drilling tasks; its 200 mm diameter, 58 mm centre bore and included 3‑jaw chuck deliver reliable set‑ups. Order the rotary table directly via Metav Werkzeuge or consult our specialists for application advice. CC-8 rotary table by Vertex — 200 mm diameter, 58 mm centre bore The CC-8 rotary table is a simple, precision indexing table designed for accurate workpiece rotation in milling, drilling and light production tasks. 200 mm precision rotary table 58 mm centre bore for direct mounting 4° indexing per spindle revolution Includes 3‑jaw chuck and cover plates Solid 51.5 kg construction Precise indexing for repeatable machining results The rotary indexing head offers 4° indexing per spindle revolution and a reading resolution of 10", enabling controlled angular steps without auxiliary electronics. With a 200 mm diameter platen and a 58 mm centre bore, the device supports direct mounting of chucks and fixtures, reducing set‑up time and minimising clamping errors. The mechanical indexing mechanism converts spindle turns into exact angular displacements, which is particularly advantageous when executing circular drilling patterns or dividing workpieces for fixture operations; the robust mass contributes to vibration damping during cuts, improving surface finish and tool life. Versatile integration into workshop workflows Designed as a straightforward rotary table for general workshop and small production environments, the unit adapts to conventional milling machines and drill presses. The simple design and included 3‑jaw chuck and a set of cover plates (2, 3, 4, 6, 8, 12) make it possible to change configurations quickly and maintain process continuity. This versatility supports lean workflows: fewer tool changes, reduced downtime and consistent positioning for repeat batches. The compact overall dimensions and standard mounting provisions ease retrofitting to existing machine tables, offering operational benefits without the need for complex interfaces. Built for durability and dependable operation Constructed with substantial mass — 51.5 kg — and compact external dimensions of 318 x 209 x 274 mm, the unit provides a stable platform for cutting operations. The solid build resists deflection under moderate clamping forces and contributes to consistent results across repeated cycles. Included accessories allow immediate use on delivery, so the table becomes a functional part of production straight away. The combination of weight, mechanical simplicity and a clear centre bore supports long service intervals and straightforward maintenance routines, which is valuable for workshops seeking reliable equipment without elaborate servicing demands. Practical handling and setup explained Setup involves fixing the table to the machine table, aligning the centre bore to the spindle axis and securing the workpiece with the supplied chuck or faceplates. The 58 mm centre bore enables direct fitting of most common chucks and arbors, reducing the need for additional adaptors. The readable indexing scale and the defined 4° per spindle turn conversion facilitate quick calculation of division angles for common divisors; for finer divisions, successive increments with the spindle deliver the desired step. Where repeatability is required, the mechanical indexing ensures the same angular position is achieved without reliance on electronic systems. For technical guidance or application recommendations for the Vertex CC-8 rotary table, contact Metav Werkzeuge — our Emmerich‑based team will advise on suitability and delivery directly from stock via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CC-8 GTIN: 4061905086977 Manufacturer: Vertex Eclass: 36600610 Name: Rundteiltisch (simple) Facts Diameter: 200 mm Dimensions: 318 x 209 x 274 mm Weight: 51.5 kg Centre bore: 58 mm Indexing per spindle revolution: 4° Reading resolution: 10" Special features Contents: 1x 3‑jaw chuck, cover plates 2, 3, 4, 6, 8, 12 Simple design SKU: CC-8 FAQ What is the effective table diameter? The table offers a 200 mm diameter platen suitable for a wide range of small to medium workpieces on the Vertex CC-8 rotary table. Can the unit be mounted directly to a milling machine? Yes. The CC-8 rotary table has a standard mounting footprint and a 58 mm centre bore for direct mounting of chucks and arbors. How precise is the angular indexing? Indexing is provided at 4° per spindle revolution with a reading resolution of 10", enabling controlled and repeatable angular steps for common dividing tasks. What accessories are supplied with the table? Delivery includes a 3‑jaw chuck and cover plates in sizes 2, 3, 4, 6, 8 and 12, allowing immediate clamping options without extra purchases. Is the table suitable for heavy cutting operations? The device has a solid mass of 51.5 kg and a compact design that dampens vibration; it is intended for milling and drilling operations where moderate clamping and cutting forces are applied. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise indexing, robust construction and simple clamping options for dependable workshop production. Order the VSR-8 dividing head directly via Metav Werkzeuge or ask our consultants if needed. VSR-8 simple dividing head — 200 mm diameter, 1° scale (Vertex) VSR-8 is a compact simple dividing head designed for accurate indexing with an integrated three- or four-jaw chuck for versatile clamping Precision 1° indexing scale 200 mm body diameter Includes three- or four-jaw chuck Solid construction, 27 kg mass Exact indexing for repeatable machining The VSR-8 dividing head provides precise 1° graduations, enabling exact angular positioning for repetitive operations. The clear graduation reduces setup time and minimises indexing errors, which helps to improve throughput and reduce scrap. The combination of readable scale and rigid spindle results in consistent angular repeatability, making the device suitable where reliable division of workpieces is required. Stable support for consistent cuts Engineered with a substantial mass, the unit's robust construction delivers stability under load and resists vibration during machining. This solidity improves surface finish and cutter engagement consistency, translating directly into fewer reworks and longer tool life. The durable build also supports steady clamping forces, which contributes to safer, more predictable results in precision tasks. Flexible clamping for varied workpieces Supplied with a three- or four-jaw chuck, the dividing head accommodates a wide range of workpiece geometries without elaborate fixturing. The chuck options allow quick adaptation between irregular and concentric parts, reducing downtime during job changes. Integration into existing fixtures is straightforward thanks to the standard mounting interfaces and conservative dimensions, so installation does not require major alterations to workshop workflows. For precision indexing and reliable workshop performance, contact Metav Werkzeuge in Emmerich to discuss the Vertex VSR-8 dividing head and arrange supply or technical advice. Technical data SKU: VSR-8 GTIN: 4061905089381 Manufacturer: Vertex Key measurements Body diameter: 200 mm Height: 159 mm Mass: 27 kg Scale division: 1° Features Simple dividing head design Delivered with three- or four-jaw chuck Compact footprint FAQ What indexing resolution does the unit provide? The VSR-8 dividing head offers a 1° graduation on the scale for precise angular indexing. Which chuck configuration is supplied with the VSR-8? The VSR-8 is supplied with a three- or four-jaw chuck, allowing clamping of both irregular and concentric components. What are the main dimensions and weight of the dividing head? The VSR-8 has a body diameter of 200 mm, a height of 159 mm and a mass of 27 kg. Is the VSR-8 appropriate for repeated indexing tasks in a small workshop? Yes, the VSR-8 dividing head is designed for reliable, repeatable indexing in workshop environments where compact, accurate division is required. Who manufactures the VSR-8 and where is it made? The VSR-8 is produced by Vertex; the product is listed under the Vertex brand and supplied with the manufacturer's identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise 1° indexing, a 200 mm chuck diameter and robust mass for stable machining. The compact construction supports a wide range of rotary machining tasks while keeping set-up straightforward. Order the VSR-83 dividing head directly via Metav Werkzeuge or ask our consultants if needed. VSR-83 dividing head (simple indexing unit) with 200 mm chuck and 1° indexing The VSR-83 dividing head is a compact, workshop-ready indexing unit designed to provide reliable division and rotary positioning for milling and similar rotary operations, equipped for use with three- or four-jaw chucks. 200 mm chuck diameter for larger workpieces 1° indexing accuracy for precise division Accepts three- or four-jaw chucks for flexibility Solid 30.5 kg mass for vibration damping Precise division for repeatable machining results The compact dividing head provides mechanical 1° indexing, enabling repeatable angular steps for tasks such as slotting, gear blank indexing and multi‑face machining. The clear specification of 1° readout means divisions are predictable and verifiable, which reduces set-up iterations. For users less familiar with indexing devices: an indexing head translates rotary motion into defined angular positions, so operations that require equally spaced features are carried out consistently and with reduced fixturing complexity. This focus on repeatability supports process stability and consistent part quality. Flexible clamping to match varied workshop needs Compatibility with three- or four-jaw chucks allows the unit to handle a broad spectrum of workpiece shapes. A three-jaw chuck typically suits round, self‑centring stock where fast clamping is required, while a four-jaw chuck gives independent adjustment for irregular or off‑centre components. The 200 mm chuck diameter increases the usable clamping envelope, enabling larger diameters to be held without additional adapters. The result is a single, adaptable rotary device that reduces the need for multiple dedicated fixtures. Mass and geometry that improve machining stability A unit mass of 30.5 kg provides inherent damping against cutting vibrations, which contributes to improved surface finish and longer tool life in cutting operations. The overall height of 159 mm keeps the centre of rotation relatively low, simplifying alignment on common machine tables and rotary fixtures. Together, mass and compact geometry support stable cutting conditions: heavier, well-balanced fixturing diminishes chatter and helps maintain dimensional accuracy under load. Straightforward integration and trusted manufacture The simple mechanical concept of this indexing unit supports straightforward integration into standard workshop setups. The product is manufactured by Vertex, a recognised name in machine accessories, and is supplied under SKU VSR-83. Its uncomplicated construction favours durability and predictable behaviour in continuous shop use, making it a practical component for toolrooms and light industrial machining operations that require consistent angular positioning without complex electronics. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Vertex VSR-83 dividing head — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VSR-83 GTIN: 4061905089930 eClass: 21020590 Core specifications Chuck diameter: 200 mm Height: 159 mm Readout resolution: 1° Weight: 30.5 kg Features Three- or four-jaw chuck compatible Simple dividing head / indexing unit Manufacturer: Vertex FAQ What angular resolution does the unit provide? The VSR-83 dividing head offers a mechanical 1° indexing resolution, allowing for repeatable angular divisions in milling and rotary machining. Which chuck types can be fitted to the unit? The unit is compatible with three- or four-jaw chucks, enabling both rapid, self‑centring clamping and independent‑jaw set‑up for irregular shapes. How does the weight affect machining performance? A mass of 30.5 kg increases damping of cutting vibrations; this contributes to improved surface finish and greater dimensional stability during machining. For which tasks is this indexing head most suitable? The indexing head is suited to operations requiring precise angular positioning such as slotting, drilling pattern division and simple gear blank indexing in workshop and toolroom environments. What are the mounting considerations for the device? The unit’s overall height of 159 mm should be considered during set-up to ensure correct alignment with the machine table or fixture; an appropriate mounting fixture or adapter is recommended for secure installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise measurement support and secure clamping: the compact Universal Jaws with Stop deliver repeatable holding thanks to the prism stop for round parts and an accuracy to two decimal places. Combine stable mass and compact dimensions for reliable workshop measuring, and order via Metav Werkzeuge or consult the sales team for application advice. Universal Jaws with Stop VWSJ-8 — prism stop for round workpieces, accuracy to 0.01 The Universal Jaws with Stop are a clamping accessory designed to support precise measuring and repeatable holding in workshop and inspection tasks, compatible with calipers and bench setups where jaw width falls within the 200–210 mm range. Precision clamping with 0.01 accuracy Prism stop for secure holding of round parts Compatible with calipers 200–210 mm jaw width Solid 4.2 kg construction for stable measuring Accurate measurement support that reduces rework The accessory provides a measurable improvement in repeatability by offering an accuracy rating to 0.01, which corresponds to consistent positioning across repeated setups. This level of fineness is beneficial where dimensional tolerances are tight and measurement drift must be avoided. The design supports common precision workflows by aligning workpieces to a predictable datum; the result is fewer re-measurements and a smoother inspection routine. Integrating the clamping accessory into a measuring station improves throughput without sacrificing traceability, because parts are presented in a stable and reproducible orientation. Secure handling of cylindrical and irregular parts A dedicated prism stop is incorporated to cradle round workpieces securely, preventing rotation and lateral slip during measurement or light machining tasks. The prism function converts a potentially unstable contact into a positive three-point support, improving contact consistency compared with flat jaws alone. For inspection tasks that require the same diameter to be gauged repeatedly, this feature enhances repeatability and reduces the risk of part deformation caused by uneven clamping forces. The accessory therefore suits workshops and inspection benches that process shafts, pins or turned components. Stable construction for dependable workshop use With compact external dimensions of 245 x 42 x 76 mm and a measured mass of 4.2 kg, the component provides a low centre of gravity and resistance to vibration during handling and measurement. The physical weight contributes to a steady measuring reference, especially when clamped into a bench vice or mounted on a work fixture, and the compact footprint leaves room for adjacent tools or instruments. The overall specification suits regular use in production-support roles, providing a balance between robust performance and easy integration into existing setups. Reliability in daily operations supports production continuity and reduces unexpected downtime. Contact Metav Werkzeuge for a compatibility check and delivery details from our Emmerich stock to ensure the VWSJ-8 fits the intended measuring system Technical data SKU: VWSJ-8 GTIN: 4061905092541 Designation: Universal jaws with stop Special feature: Prism stop for round workpieces Facts Dimensions: 245 x 42 x 76 mm Weight: 4.2 kg Accuracy: 0.01 Suitable for caliper jaw width: 200–210 mm Special features Prism stop for secure holding of cylindrical parts Universal jaw configuration with integrated stop Compact footprint for bench and fixture integration FAQ How does the prism stop improve measuring repeatability? The prism stop integrated into the Universal Jaws with Stop provides defined three-point support for round workpieces, improving repeatability and making the VWSJ-8 more reliable for repeated diameter checks. Is the accessory compatible with standard precision calipers? Yes. The VWSJ-8 is designed for use where caliper jaw width is between 200 and 210 mm, allowing straightforward mounting alongside many precision calipers and measurement fixtures. What level of measurement consistency can be expected? The jaws provide measurement support rated to 0.01, offering fine positional consistency suited to inspection tasks that require two-decimal reproducibility. Can the jaws be used for heavier or obstructive parts? The solid 4.2 kg construction of the VWSJ-8 gives a stable contact base; for very heavy workpieces, additional fixturing is recommended to ensure safe clamping and unchanged measurement results. What are the physical dimensions and footprint of the accessory? Dimensions are 245 x 42 x 76 mm, providing a compact footprint that is compatible with bench vices and measuring stations without occupying excessive space. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of reliable 0.01 mm accuracy and a soft stop that adapts to irregular shapes for consistent measurement results; order the item directly via Metav Werkzeuge or consult our specialists for assistance. Universal Jaws with Stop (VWSJ-R200) – adaptable contact for precision calipers The Universal Jaws with Stop are an attachment for workshop calipers, engineered to provide adaptable contact and consistent readings when measuring irregular or non‑planar workpieces. Soft stop for irregular workpieces Compatible with calipers, jaw width 200–210 mm High accuracy 0.01 mm SKU VWSJ-R200, Vertex manufacturing Accurate contact on uneven surfaces improves repeatability The integrated soft stop reduces localised point loading on uneven components, producing a more consistent measuring interface than rigid jaws. By distributing contact pressure, the accessory helps to maintain repeatability across multiple measurements and limits deformation on delicate parts. This effect is particularly valuable in short inspection runs and routine quality checks where small variances can lead to rework. The compliant contact surface is designed to adapt to contours without compromising the measuring process, supporting reliable readings that align with modern metrology expectations. Direct compatibility reduces setup time in the workshop Designed for calipers with a jaw width 200–210 mm, the attachment slots into existing measuring setups to expand functionality without extensive modification. The straightforward fitment minimises downtime during tool changes and enables quick deployment at the inspection bench, which supports lean workflows. For measurement systems where fast, repeatable checks are required, the accessory provides a practical way to increase versatility. Clear identification via the VWSJ-R200 SKU simplifies ordering and inventory management for procurement teams. Precision results that support production quality With a documented accuracy of 0.01 mm, the accessory contributes to dependable measurement traces and supports decision‑making in both production and quality assurance. Manufactured to Vertex standards, the component integrates into standard metrology practices and facilitates comparability between inspection results. By improving contact stability on irregular pieces, the product helps to reduce false rejections and supports more efficient process control, indirectly contributing to lower scrap rates and better end‑product consistency. For measurement tasks that demand adaptable contact and consistent accuracy, request the VWSJ‑R200 Universal Jaws with Stop from Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and delivery from Emmerich. Technical Data Article number: VWSJ-R200 GTIN: 4061905089787 Name: Universal Jaws with Stop Facts Dimensions: 245 x 42 x 76 mm Accuracy: 0.01 mm Jaw width compatibility: 200–210 mm Special features Soft stop for irregular workpieces Suitable for calipers (jaw width 200–210 mm) Manufacturer: Vertex FAQ Which calipers are compatible with these jaws? The accessory fits calipers with a jaw width of 200–210 mm and is supplied under the SKU VWSJ‑R200 for easy identification. How does the soft stop affect measurement results? The soft stop provides compliant contact that evens out pressure on uneven surfaces, improving repeatability and reducing the risk of part deformation during measurement with the Universal Jaws with Stop. Is the stated accuracy of 0.01 mm achievable in workshop conditions? Under correct setup and stable measuring conditions, the 0.01 mm accuracy is attainable; consistent fixturing and proper use of the attachment support reliable inspection outcomes. Can the jaws be used for delicate or soft materials? Yes, the adaptable contact of the soft stop is particularly suited to delicate substrates, where rigid contact could otherwise cause marks or deformation when measured with calipers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a toothed locating profile and 16 mm T‑slot compatibility for reliable, repeatable clamping across machining cycles; the 200 mm height gives clearance for larger fixtures while the lightweight construction supports easy handling. Order the workpiece stop directly via Metav Werkzeuge or ask our consultants if needed. Workpiece stop VWS-125 — toothed locating stop for T‑slot tables (Vertex) Workpiece stop VWS-125 designed for secure positioning on machining and fixture tables, featuring a toothed profile for positive engagement in 16 mm T‑slots and a 200 mm overall height for versatile setup. T‑slot 16 mm compatible Toothed locating profile for positive grip 200 mm height for larger fixtures Lightweight at 1.1 kg for easy handling Consistent locating for repetitive machining The toothed locating profile delivers positive engagement with standard T‑slots, reducing slippage during machining and ensuring consistent part placement. By engaging directly with a 16 mm T‑slot, the stop converts table geometry into a reliable reference surface, which simplifies setup and shortens cycle-to-cycle variation. For shops that run serial operations, this means fewer re‑set checks and more predictable tolerances — an efficiency gain that translates into measurable production stability. Durable design that supports secure clamping Constructed to work with common machine tables, the stop's toothed profile provides mechanical interlock rather than relying solely on friction; this reduces movement under lateral forces and improves safety when loading heavier fixtures. The 200 mm height offers additional vertical clearance for bespoke clamping arrangements and allows the stop to be used with stacked supports or spacer blocks. The combination of positive locating and generous height supports robust fixturing strategies without altering established workholding plans. Practical handling and workshop integration At a weight of 1.1 kg, the component is light enough for quick repositioning while remaining substantial enough to resist accidental displacement during clamp-up. Compatibility with the 16 mm T‑slot standard enables straightforward integration into existing setups without additional adapters. Clear labelling with the SKU ensures traceability on the shop floor and in documentation, helping maintain orderly inventory and replacement routines. Why this stop helps production flow By converting table slots into reliable datum points, the stop reduces setup time and rework, increasing throughput and lowering per‑part processing cost. The toothed engagement supports applications where lateral forces or vibration are present, giving shops confidence in repeatability. When paired with a consistent clamping protocol, the component aids in achieving tighter process control across batches. Select the Vertex toothed workpiece stop VWS-125 via Metav Werkzeuge in Emmerich — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery Technical data Article number: VWS-125 GTIN: 4061905093821 ECLASS: 21029210 Core specifications Height: 200 mm Weight: 1.1 kg T‑slot width: 16 mm Design & features Type: with teeth (toothed locating profile) Category: Vertex FAQ What table systems is this workpiece stop compatible with? The workpiece stop VWS-125 is compatible with tables that accept a 16 mm T‑slot, allowing direct mechanical engagement via its toothed locating profile. Can the VWS-125 be used for serial production setups? Yes, the toothed design of the Vertex workpiece stop VWS-125 provides repeatable locating for serial machining, reducing re‑set time and improving process stability. How heavy is the stop and how does that affect handling? The Vertex workpiece stop VWS-125 weighs 1.1 kg, making it easy to reposition while offering sufficient mass to resist movement during clamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining a 200 mm height, a 16 mm T-slot interface and a toothless contact face, the VWS-123 delivers dependable, repeatable end stops for machining and fixturing applications; order the workpiece stop directly via Metav Werkzeuge or consult our specialists for integration advice. Workpiece stop VWS-123 — 200 mm height, 16 mm T-slot (Vertex) The Workpiece stop provides consistent end stops for machining and fixturing on T-slotted tables, designed for straightforward integration into workshop and machine setups. 200 mm height for versatile positioning Compatible with 16 mm T-slots Toothless clamping face for smooth contact Lightweight at 0.9 kg for easy handling Repeatable positioning that reduces setup time Engineered for reliable alignment, the VWS-123 workpiece stop secures components against a defined datum so that setups are repeatable across multiple runs. The 200 mm height offers an extended stop surface for taller or uneven workpieces, while the toothless contact face prevents marking on delicate parts. This combination supports faster fixturing and fewer adjustments, improving throughput on small-batch and serial operations. Simple compatibility with standard T‑slot tables The compact design is tailored to fit a 16 mm T‑slot, enabling immediate compatibility with many common machine tables and modular fixturing systems. The T‑slot interface allows secure mounting without complex adaptors, which simplifies retrofitting into existing workflows and reduces downtime during changeovers. Described dimensions and mounting type provide clear criteria for planners and workshop engineers when preparing fixtures. Lightweight handling and workshop practicality At 0.9 kg, the stop is easy to position and reposition by hand, making it suitable for bench setups and quick jigs as well as machine tool use. The toothless contact face allows safe contact with finished surfaces, reducing the risk of cosmetic damage while maintaining a stable end stop. Built for everyday workshop tasks, the device balances manoeuvrability with the dimensional control expected in production environments. Contact Metav Werkzeuge today for tailored advice on integrating the Vertex VWS-123 into existing fixturing — Metav’s team in Emmerich can advise on compatibility, delivery and application-specific solutions via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VWS-123 GTIN: 4061905084348 ECLASS: 21029210 Manufacturer: Vertex Core data Weight: 0.9 kg Height: 200 mm T‑slot: 16 mm SKU: VWS-123 Special features Type: Toothless (without teeth) Category: Vertex Image: vws-123-main.jpg FAQ What T‑slot size is required for mounting? The VWS-123 is designed for a 16 mm T‑slot, ensuring direct compatibility with tables and fixtures that use this standard slot width. Is the stop suitable for delicate or finished workpieces? Yes. The toothless contact face prevents surface marking, making the component suitable for parts where cosmetic integrity matters. How much does the device weigh and is it easy to handle? The stop weighs 0.9 kg, which allows manual positioning for quick setups and straightforward transfer between bench and machine use. Can the component support repeatable serial production setups? Its dimensional design, notably the 200 mm height and T‑slot mounting, provides the consistency needed for repeatable fixturing and short changeover times. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of precision soft jaws, compact dimensions and substantial mass delivers secure, damage‑free clamping and steady set‑ups in repeat production. Order the VQC‑200L‑MJ soft jaws directly via Metav Werkzeuge or consult our advisors for application guidance. VQC-200L-MJ Soft Jaws for VQC vices — precision clamping, 200 × 117 × 75 mm VQC-200L-MJ soft jaws designed to protect workpieces and expand the clamping range of VQC vices for workshop and small‑batch production Precision‑machined soft jaws for secure clamping Compatible with VQC series vices Dimensions 200 × 117 × 75 mm for stable hold Robust construction, weight 13.08 kg Damage‑free clamping for delicate components Soft jaws are used to avoid surface damage and to increase contact area when holding non‑ferrous or finished parts. The soft jaws in this set are shaped to distribute clamping forces evenly, which reduces point loads that cause marring. For delicate workpieces, this means a reliable grip without additional protective fixtures, reducing handling steps and scrap rates. The result is consistent part quality and fewer process interruptions during repetitive tasks. Seamless integration with VQC vices for repeatable setups Designed for direct mounting on the VQC family of vices, these jaws permit rapid, repeatable fixturing. The tailored fit guarantees constant jaw alignment and parallelism, shortening setup times and improving throughput. For production environments where changeovers are frequent, the ability to restore a reference set quickly translates into measurable time savings and higher machine utilisation. Compatibility with the VQC line ensures predictable behaviour across multiple workstations. Faster changeovers and improved process stability The compact dimensions of 200 × 117 × 75 mm and the stated mass (13.08 kg) balance manoeuvrability with stability. The mass helps dampen vibration during machining, while the modest footprint makes swapping jaws straightforward on the shop floor. Reduced vibration contributes to better surface finish and longer tool life, while the manageable size supports efficient storage and handling in confined workspaces. Proven supplier and workshop benefits Manufactured by Vertex, these soft jaws bring established quality to everyday clamping tasks. Combined with Metav’s role as a European quality filter and distributor, customers benefit from dependable logistics and product availability. Metav’s offer is aimed at making precision tools accessible: a broad range of products and long‑standing supplier relationships reduce procurement complexity for shops and toolrooms, helping to maintain steady production. For workshop‑grade, damage‑free clamping with Vertex reliability, request the VQC‑200L‑MJ soft jaws from Metav Werkzeuge in Emmerich or contact our consultants for tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: VQC-200L-MJ GTIN: 4061905088230 ECLASS: 21029107 Facts Dimensions: 200 × 117 × 75 mm Weight: 13.08 kg Manufacturer: Vertex Special features Soft jaws for VQC vices Precision fit for repeatable set‑ups Suitable for protective workholding of delicate parts FAQ What workpieces are best held with these soft jaws? These soft jaws are suited to delicate or finished components where surface preservation is required; the VQC‑200L‑MJ set (Vertex) increases contact area and reduces point loading during clamping. Are the jaws compatible with all VQC models? Compatibility is intended for the VQC series; the VQC‑200L‑MJ is manufactured to match VQC vice mounting dimensions for consistent alignment. How do the dimensions influence workshop use? The 200 × 117 × 75 mm size offers a compact footprint for small to medium parts while the 13.08 kg mass provides stability, helping to reduce vibration during machining. Can these jaws be reground or modified? Modifying soft jaws is possible in principle to match specific workpiece contours; any machining should preserve safe clamping geometry. For advice, refer to Vertex guidance and Metav consultants. Is the VQC‑200L‑MJ suitable for high‑volume production? Yes. The precision fit and repeatability of the jaws support efficient changeovers and steady production runs, contributing to reduced setup times and consistent part quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Improve clamping precision and protect delicate workpieces with the combination of soft replaceable contact surfaces and a precision fit for VQC-series vises; the robust construction supports consistent repeatability. Order or enquire via Metav Werkzeuge for tailored advice from our consultants. Soft Jaws VQC-200L-FJ — Soft replaceable jaws for VQC vises, precision fit (Vertex) A set of Soft Jaws VQC-200L-FJ created to protect sensitive components while providing accurate clamping on VQC-series vises in workshop and light production environments Protects delicate workpieces during clamping Precision fit to VQC-series vises Durable, replaceable soft contact surfaces Improved clamping accuracy and workpiece protection Soft clamping faces reduce marring and distribute pressure over a larger area, which helps to preserve surface finish on fragile parts. The soft jaws act as a sacrificial contact layer that is easily renewed when worn, extending the service life of the primary vice jaws. By combining a compliant contact surface with a precision fit to the vice, the solution lowers rework rates and supports stable part presentation for subsequent machining or measurement operations. This reduces downtime associated with part rejection and contributes to a more predictable production flow. Faster changeover and consistent repeatability Designed for quick replacement, the soft contact inserts minimise setup time between jobs while maintaining repeatable clamping locations. The combination of a tailored geometry and a secure mounting interface ensures consistent seating on the vice, which preserves datum alignment across repeated cycles. This repeatability is particularly valuable for small-batch runs and inspection tasks where positional accuracy and minimal handling are required. Reduced handling and faster changeovers translate into measurable efficiency gains on the shop floor. Workshop-friendly design and compatibility The component is sized for common workshop applications and integrates directly with the VQC family of vises. With compact external dimensions 200 x 122 x 75 mm and a mass of 3.61 kg, the item balances rigidity with manageable weight for handling and storage. Material and coating details are determined by the production batch; the overall design principle centres on protection, easy replacement and compatibility with existing clamping systems. For processes that require careful surface preservation or soft-fixturing solutions, these jaws provide a straightforward and reliable option. For ordering, technical clarification or to discuss suitability for specific applications, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; Metav's consultants will advise on matching Vertex products to workshop needs. Technical data Article number: VQC-200L-FJ GTIN: 4061905094743 ECLASS: 21029107 Facts Dimensions: 200 x 122 x 75 mm Weight: 3.61 kg Special features Soft, replaceable contact surfaces Designed for VQC-series vises Manufacturer: Vertex SKU: VQC-200L-FJ FAQ Are these jaws compatible with all VQC vises? The soft jaws are designed specifically for the VQC-series and will fit the matching vice models; compatibility should be confirmed against the vice model designation. Can the contact surfaces be replaced when worn? Yes, the design includes replaceable soft contact surfaces so that the primary clamping faces remain intact and service life is extended. What benefits do soft jaws offer for delicate parts? Soft jaws provide a compliant contact that reduces surface damage and spreads clamping forces, improving part preservation during machining or inspection. Is the VQC-200L-FJ suitable for repeated production cycles? The VQC-200L-FJ offers consistent seating and repeatability, making it suitable for repeated cycles where surface protection and positional stability are required. Which manufacturer produces these soft jaws? These soft jaws are produced by Vertex and supplied under the SKU VQC-200L-FJ. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of a dust-protected halogen light (IP67), a sturdy 200 x 200 mm arm and flexible multi-voltage supply ensures reliable inspection illumination in demanding workshop environments; order the Vertex VHL-300MR directly via Metav Werkzeuge or consult our specialists for system integration. Vertex VHL-300MR Halogen Lamp — Dust-protected inspection light with multi-voltage supply The VHL-300MR is a dust-protected halogen lamp designed for workshop inspection and assembly tasks, mounted on a 200 x 200 mm articulated arm for precise positioning. Dust-protected halogen lamp with IP67 light Sturdy arm 200 x 200 mm for flexible positioning Multi-voltage: 24 / 110 / 220 / 380 V available Includes 1.8 m connection cable Consistent inspection light for precise work The halogen unit delivers consistent, high-contrast illumination, making fine details easier to assess during visual inspection and assembly. The halogen technology offers steady colour rendering and instantaneous full output, which benefits tasks that demand accurate surface evaluation rather than intermittent lighting. Compatibility with 50 W, 55 W and 70 W bulbs allows adaptation of luminous intensity to the application, while preserving a predictable light characteristic that supports repeatable inspection results. Built for harsh workshop conditions and stable positioning Engineered for durability, the lamp head is rated IP67, providing dust protection and resistance to temporary immersion, while the supporting arm carries an IP65 rating for protection against dust and water jets. The articulated 200 x 200 mm arm gives controlled reach and positioning, and the lamp’s mass contributes to a stable mounting platform for inspection setups. These features reduce interruption from environmental contamination and prevent repositioning drift during precision tasks, supporting continuous production and quality assurance. Electrical compatibility and straightforward integration With selectable supply voltages of 24 / 110 / 220 / 380 V, the lamp can be integrated into a wide range of industrial and laboratory electrical systems without additional converters in many cases. The unit accepts common halogen bulb powers (50 W / 55 W / 70 W) and is supplied with a 1.8 m cable for immediate connection. This combination of multi-voltage capability and common bulb types simplifies commissioning and spares management in workplaces that run mixed equipment inventories. For dependable inspection lighting from a recognised manufacturer, request the Vertex VHL-300MR via Metav Werkzeuge or contact Metav Werkzeuge for tailored integration advice and delivery options Technical data Article number: VHL-300MR GTIN: 4061905089756 Manufacturer: Vertex Facts Weight: 3.6 kg Arm dimensions: 200 x 200 mm Voltage options: 24 / 110 / 220 / 380 V Special features Light protection: IP67 Arm protection: IP65 Bulb compatibility: 50 W / 55 W / 70 W Cable included: 1.8 m FAQ Which bulb powers are compatible with this lamp? The VHL-300MR accepts 50 W, 55 W and 70 W halogen bulbs, allowing adjustment of illumination intensity for different inspection tasks. Is the lamp suitable for dusty or damp workshop environments? Yes. The lamp head is rated IP67 and the arm is IP65, providing protection against dust ingress and water jets suitable for most workshop conditions. Can the light be used with different supply voltages on site? The unit supports 24 / 110 / 220 / 380 V, enabling integration into various electrical systems without extensive modification. How long is the connection cable supplied with the lamp? The VHL-300MR is supplied with a 1.8 m cable ready for immediate connection. Does the lamp provide stable positioning during fine inspection work? The articulated 200 x 200 mm arm and the lamp’s stable mass ensure precise and steady positioning for visual inspection and assembly tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, space-saving solution with clear handling advantages: the set format and precise dimensions enable consistent small-part organisation and faster retrieval in production environments. Order directly via Metav Werkzeuge or consult the Metav team for tailored advice. Small parts storage boxes VHB-2035 — Vertex set with compact footprint and lightweight handling Small parts storage boxes VHB-2035 provide a compact, modular solution for organising small components across workshops, stores and assembly stations. Compact 200 x 350 x 150 mm footprint Supplied as set of 18 small boxes Lightweight at 0.585 kg per box Save bench space with a compact, organised kit The VHB-2035 small parts storage boxes are designed to maximise bench and shelf efficiency through a compact 200 x 350 x 150 mm footprint that fits standard workbenches and shelving racks. Supplied as a set of 18, the format supports consistent layout planning on the shop floor, enabling a tidy arrangement of fasteners, fittings and small components. Clear labelling and a uniform footprint simplify replenishment routines and reduce time spent searching for items, which contributes directly to throughput improvements in repetitive manufacturing tasks. Faster sorting and handling to reduce process time At 0.585 kg per box, the lightweight construction allows rapid repositioning during assembly or pick-and-place operations without heavy lifting or awkward handling. The modular format supports grouped storage, so batches of related parts can be kept together for single-step retrieval. By combining a space-saving design with easy handling, the system promotes a smoother material flow and fewer interruptions during production runs, which translates into measurable time savings and fewer handling errors. Practical choice for workshops with reliable supply from Metav The configuration suits both trade workshops and production departments that require straightforward small-part organisation without complex installation. Metav’s approach to supply ensures availability and continuity: the offering is backed by a European distribution and quality filter in Emmerich, plus decades of experience supplying industry and craft. This practical logistics and service setup supports steady workshop operation and reduces procurement complexity for maintenance and production teams. For availability, configuration advice or delivery options for the Vertex VHB-2035 small parts storage boxes, contact Metav Werkzeuge — Metav’s Emmerich team provides reliable supply and expert guidance; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VHB-2035 GTIN: 4061905090165 Manufacturer: Vertex Facts Dimensions: 200 x 350 x 150 mm Weight: 0.585 kg Pieces per set: 18 EClass: 21100422 Special features Supplied as a set Intended for small parts organisation Images: VHB-1218-main.png, VHB-1218-detail.png FAQ What are the external dimensions of the boxes? The external dimensions are 200 x 350 x 150 mm for each unit in the VHB-2035 small parts storage boxes by Vertex. How many boxes are supplied in one set? Each delivery of the VHB-2035 is supplied as a set of 18 individual boxes. What is the weight of a single box? A single box weighs 0.585 kg, allowing easy handling and frequent repositioning on the workbench. Are these boxes suitable for workshop use and industrial environments? Yes, the format and design of the VHB-2035 make it suitable for workshop and light industrial organisation of small components, supporting orderly storage and efficient retrieval. Can these boxes be used for mixed small parts like screws, washers and electronic components? The boxes are designed for general small-part organisation and work well for screws, washers, fittings and similar components where compact, repeatable storage is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Die Kombination aus kompakten Maßen, dem praktischen 12‑teiligen Set und dem geringen Gewicht sorgt für eine effiziente Werkstattorganisation – ideal, um Kleinteile ordentlich zu sortieren und schnell griffbereit zu haben. Bestellen Sie die Storage Boxes direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Storage Boxes – Small parts organiser The Storage Boxes offer a compact solution for sorting and storing small components; designed as a practical set for workshops, trade counters and hobby workbenches. Storage Boxes for Small Parts 12‑piece Set for clear sorting Compact footprint 200 x 450 x 177 mm Lightweight 0.8 kg per set Compact footprint speeds up daily work With an exact footprint of 200 x 450 x 177 mm, these Storage Boxes present a clearly defined surface area that simplifies placement on a Workbench or in a Cabinet. The measured Dimensional specification allows planning of Workspace layouts and Drawer organisation without guesswork. The compact Format reduces clutter and contributes to a tidier Workplace, improving efficiency during assembly or maintenance tasks. Practical set composition for systematic sorting Delivered as a 12‑piece Set, the product enables logical separation of Fasteners, Fittings or small Components across multiple Containers. A fixed number of Items per Set supports inventory control and makes restocking predictable. This straightforward arrangement turns chaotic parts into a reproducible Storage system, saving time otherwise spent searching for the right piece during repair or production operations. Who benefits from this solution Craftspeople, Maintenance Teams and Workshop Managers benefit most from a product tailored to small parts handling. The combination of defined Dimensions, low Mass (0.8 kg) and set Quantity makes the boxes suitable where repeatable organisation matters. Metav’s role as supplier ensures access to consistent stock and dependable delivery from Emmerich, reinforcing operational continuity for industrial and trade customers. Clear advantages translated into everyday use Rather than listing features alone, the emphasis is on outcomes: faster part retrieval, simplified inventory and reliable placement planning. The practical Format supports modular storage strategies, while the fixed Set size helps when specifying Equipment for multiple Workstations or service Vehicles. Minimal handling weight also eases Transport between job sites or production lines. We recommend the Vertex Storage Boxes as a practical organiser for workshops and maintenance teams — purchase via Metav for reliable supply from Emmerich. For technical queries or order assistance eMail info@metav-werkzeuge.com or call +49 2822 7131930 Product Features Article number: VHB-2045 Brand: Vertex Product: Storage Boxes Intended use: For Small Parts Set: Yes Pieces per set: 12 Facts Weight: 0.8 kg Dimensions: 200 x 450 x 177 mm Pieces per set: 12 Specials ECLASS: 21100422 – classification code Set: true Intended for small parts organisation FAQ What is included in the set? The VHB-2045 from Vertex is supplied as a 12‑piece Set; each unit is designed for Small Parts organisation and is listed under SKU VHB-2045. Are the dimensions suitable for bench mounting? The Dimensions 200 x 450 x 177 mm give a compact footprint that is well suited to Bench‑Top placement and planned storage layouts. How heavy is the complete set? The complete set weighs 0.8 kg, making handling and repositioning straightforward for Workshop and Service use. Can these boxes be used for electronics components? Yes. The Storage Boxes are intended for Small Parts and are appropriate for organising electronic components, fasteners and similar items in a systematic way. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan