Ausstattungen für Fräsmaschinen

Benefit from precise 1° indexing, a 160 mm capacity and a compact 139 mm profile for reliable, space-efficient machining; the combination of accurate division, versatile chucking and solid mass reduces setup time and increases throughput. Order the Vertex VSR-6 directly via Metav Werkzeuge or ask our consultants if needed. VSR-6 Vertex simple dividing head — 160 mm capacity, three- or four-jaw chuck A VSR-6 simple dividing head designed for accurate indexing and flexible workholding in small to medium workshop setups. 160 mm maximum diameter 1° indexing resolution Three- or four-jaw chuck option Compact 139 mm overall height Repeatable indexing that speeds up production The chief advantage of the dividing head lies in its 1° indexing, which enables consistent, repeatable rotations for serial drilling, milling and layout tasks. This precise step size reduces alignment checks and minimises human error, producing a measurable improvement in cycle times. By converting angular settings into reliable mechanical stops, the device supports efficient batch work where repeatability is essential, saving time on complex setups and adjustments. Versatile chucking for different workpiece profiles Equipped for three- or four-jaw chuck configurations, the unit adapts to both round and irregular blanks without the need for additional accessories. The three-jaw option secures cylindrical parts quickly, while the four-jaw alternative allows independent adjustment for off-centre or square components. This versatility means fewer tool changes and more flexible use across diverse tasks, supporting mixed production runs with minimal downtime. Stable, compact footprint for busy benches With a mass of 17.8 kg and an overall height of 139 mm, the device combines stability with a small footprint suited to limited bench space. The weight contributes to vibration damping during indexing and machining operations, improving surface finish and positional accuracy. The compact design keeps the setup close to the machine table, simplifying alignment and easing integration into existing workholding arrangements where space is a premium. Practical integration for workshop workflows Designed as a straightforward workholding and indexing solution, the head fits well into small workshops, toolrooms and prototyping environments that require dependable angular control without complex electronics. The simple mechanical design reduces maintenance demands and aids fast operator familiarisation. For applications requiring a compact, accurate dividing device with flexible chuck options, this head delivers consistent results with minimal overhead. Contact Metav Werkzeuge for personalised advice on the Vertex VSR-6 and to arrange supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored information and delivery options Technical data Article number: VSR-6 GTIN: 4061905083648 E-class: 21020590 Product name: Simple dividing head Core data Diameter: 160 mm Height: 139 mm Weight: 17.8 kg Indexing resolution: 1° Special features Three- or four-jaw chuck Simple dividing head design Compact workshop-friendly format FAQ What maximum workpiece diameter fits this unit? The dividing head accepts workpieces up to 160 mm in diameter as specified for the VSR-6. What indexing accuracy does it offer? Indexing is provided at 1° increments, offering repeatable angular positioning for division tasks. Can different chucks be fitted to the unit? Yes — the unit is available with a three- or four-jaw chuck option to suit round and non-round components. Is the device suitable for small workshop use? The compact height and stable mass make the VSR-6 appropriate for small to medium workshops and toolrooms requiring reliable indexing. How heavy is the dividing head and why does that matter? The unit weighs 17.8 kg, which helps to damp vibrations and maintain stability during machining and indexing operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of axial-drive reliability, smooth, non-marring gripping surfaces and compact dimensions for consistent clamping performance in repetitive machining operations; order the set directly via Metav Werkzeuge or consult our specialists for technical matching. VNC-6PJ axial drive and smooth jaws — smooth-jaw set for VNC-FV (Vertex) VNC-6PJ is a smooth-jaw clamping set with an axial-drive interface, engineered for secure, non-marring workholding in conjunction with VNC-FV chucks. Axial-drive mechanism for secure clamping Smooth jaws for non-marring grips Supplied in pairs for matched performance Compact size: 160 x 54 x 18 mm Precision clamping that protects the workpiece The axial-drive design converts spindle or chuck actuation into reliable jaw movement, ensuring consistent clamping force across cycles. For shops running serial operations, this mechanical consistency reduces setup variability and contributes to predictable machining results. The smooth jaw profile prevents surface damage on soft or finished components, making the set particularly suitable where finish quality is critical. By integrating controlled clamping with a non-marring contact surface, the assembly helps to increase first-pass acceptance rates and lowers the risk of rework. Simple compatibility and straightforward installation Designed specifically for integration with the VNC-FV chuck family, the insert set follows the established axial interface so it aligns with existing mounting points and drive features. The matched pair format means both jaws arrive balanced for repeatable performance, reducing the time spent on trial adjustments. If the chuck design requires reference to the manufacturer’s mounting instructions, this set is intended to fit without modification where the VNC-FV specification is met, facilitating rapid changeover in a production environment. Robust construction for workshop reliability Although compact in footprint, the assembled unit provides a substantial mass for stable clamping, with a measured weight of 2.6 kg contributing to vibration damping during cutting. The combination of a precise drive interface and smooth contact faces offers longevity under routine use when inspected and maintained at regular intervals. For operations that prioritise process reliability, the Vertex components supply a dependable option that pairs functional simplicity with manufacturing-grade durability. Contact Metav Werkzeuge in Emmerich to confirm compatibility of the Vertex VNC-6PJ smooth-jaw set with existing VNC-FV equipment and to arrange availability or technical advice. Technical data SKU: VNC-6PJ GTIN: 4061905093869 eClass: 21130302 Manufacturer: Vertex Facts Dimensions: 160 x 54 x 18 mm Weight: 2.6 kg Special features Axial drive Smooth jaws (non-marring) For VNC-FV Supplied in pairs Brand: Vertex FAQ Are these jaws compatible with VNC-FV chucks? Yes. The Vertex VNC-6PJ smooth-jaw set is designed for use with VNC-FV chucks and follows the axial-drive interface of that chuck family. Can the smooth jaws be used on delicate or finished parts without marking? Yes. The smooth contact faces of the VNC-6PJ are intended to provide a non-marring grip, minimising surface damage on delicate or finished components. How are the jaws supplied and matched? They are supplied in pairs to ensure matched performance and balanced clamping during repetitive cycles. What are the external dimensions and mass of the set? Dimensions are 160 x 54 x 18 mm and the set weight is 2.6 kg. Is special maintenance required to preserve performance? Routine inspection for wear and cleaning of contact surfaces is recommended; replace the jaws when signs of wear affect clamping accuracy or surface protection. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise indexing and robust workshop construction to streamline machining operations; the combination of 1° division accuracy and a compact 165 mm centre height supports consistent results and simple integration. Order the VSR-10 directly via Metav Werkzeuge or ask our consultants if needed. VSR-10 Dividing head – 1° indexing, 165 mm centre height (Vertex) The VSR-10 is a compact dividing head designed for precision indexing and fixture work on milling machines, supplied with either a three- or four-jaw chuck for versatile clamping and straightforward part rotation. 1° index graduation Three- or four-jaw chuck option Compact 165 mm centre height Solid 43.5 kg construction Precision indexing that improves throughput A workshop-ready dividing head with 1° graduation provides a simple, verifiable way to perform repetitive angular machining tasks with reduced setup time. The device converts manual or driven rotation into accurate, evenly spaced positions, making it suitable for tasks such as gear blank indexing, hole patterns and fixture alignment. The clear indexing indication and robust gearing translate directly into lower rework rates and higher first-pass yields, which supports a leaner production flow and predictable cycle times. Robust build for reliable daily use The machine-style construction and substantial mass of 43.5 kg give the unit stable behaviour during cutting, reducing vibration and improving surface finish compared with lighter fixtures. A robust body and precision bearings maintain alignment under load, which ensures repeatable results across long production runs. For workshops requiring dependable clamping, the three- and four-jaw chuck options permit secure holding of a wide range of part geometries without frequent re-adjustment, so cycle reliability and operator confidence increase. Compact form for easy integration on the shop floor With a 165 mm centre height, the dividing head fits common machine table envelopes while keeping the workpiece near standard cutter centres. The compact footprint aids fixture planning and allows the device to be used in constrained setups or alongside other workholding. The straightforward mechanical design reduces the need for specialised training: routine indexing and basic clamping are quickly learned, which shortens onboarding time for new operators and supports flexible deployment across different jobs. Clear benefits for procurement and operations Selecting a plain, mechanically driven dividing head emphasises serviceability and longevity: fewer electronics and modular components simplify maintenance and spare-part management. The dependable repeatability and simple adjustment mean lower total cost of ownership in environments that favour predictable performance over complex automation. For businesses consolidating suppliers, this solution matches a practical scope of applications while remaining compatible with standard tooling and chucks. Contact Metav Werkzeuge in Emmerich for specification checks, spare parts availability and ordering of the Vertex VSR-10; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VSR-10 GTIN: 4061905088926 Manufacturer: Vertex Facts Weight: 43.5 kg Centre height: 165 mm Indexing resolution: 1° Special features Simple dividing head with three- or four-jaw chuck Workshop-grade construction for stable clamping Suitable for indexing and fixture tasks on milling machines FAQ What indexing accuracy does the dividing head provide? The VSR-10 dividing head offers a 1° indexing resolution, suitable for common angular layouts and repetitive patterning tasks. Can the unit accept different chucks for varied parts? Yes, the device is supplied with the option of a three- or four-jaw chuck, allowing secure clamping of round and irregular components for flexible machining. Is the dividing head heavy enough to reduce vibration during cutting? With a mass of 43.5 kg, the unit provides a stable platform that helps reduce vibration and improves surface finish compared with lighter fixtures. How does the centre height affect machine setup? The 165 mm centre height aligns the workpiece close to standard cutter centres, simplifying fixture arrangements and aiding integration on most milling tables. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the compact dimensions, robust S45C steel construction and M6 compatibility to secure guide rails reliably in confined assemblies; the set format simplifies stocking and replacement. Order directly via Metav Werkzeuge or consult the sales team for specification checks. 16TO14 block for guide rail – compact S45C with M6 T‑nut compatibility The 16TO14 block for guide rails is a compact mounting block designed to position and secure linear guides in light‑assembly and workshop fixtures, offering a space‑saving solution for confined machine beds. Compact 16×20×14 mm footprint S45C steel for robust wear resistance Compatible with M6 T‑nut mounting Supplied as a set of 4 blocks Space‑efficient precision for tight assemblies The small footprint of the block ensures reliable locating in restricted spaces without compromising on mechanical stability. Constructed from S45C, the component provides a predictable balance between toughness and machinability; the material choice supports consistent performance under repetitive load cycles. The compact geometry translates into straightforward integration in fixtures where larger components would interfere with moving elements, while maintaining the necessary contact area for steady support. This combination of size and material reduces the likelihood of misalignment during assembly, supporting smoother production runs and fewer adjustment cycles. Designed for compatibility and straightforward installation Compatibility with an M6 T‑nut makes the unit suitable for common sloted rails and standard table systems; the threaded interface facilitates secure fastening and quick replacement. Supplied as a set of 4, the package addresses small batch requirements and minimises replenishment effort for maintenance inventories. The design places emphasis on predictable mounting: the block sits flush against the guide profile and is clamped via the T‑nut, which is a widely used solution in modular fixturing. For technicians less familiar with industrial fittings, the T‑nut system offers an intuitive method to achieve secure clamping without specialised tooling. Durable operation and simplified stock management The block’s modest mass (approx. 0.1 kg) and steel construction deliver a practical compromise between inertia and resistance to wear, reducing the need for frequent replacement in standard workshop conditions. As a Vertex‑manufactured component, the item benefits from controlled production tolerances that support interchangeability across assemblies. For procurement and workshop managers, the set format combined with standard fastening compatibility reduces variants that must be held in stock and streamlines maintenance workflows. Clear labelling with SKU and GTIN aids traceability and ensures the component can be matched to existing parts lists during servicing. For specification confirmation or to arrange a supply of Vertex blocks through Metav Werkzeuge, contact the team in Emmerich — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical data Article number: 16TO14 GTIN: 4061905092756 Manufacturer: Vertex Facts Material: S45C Dimensions: 16×20×14 mm Weight: 0.1 kg T‑nut size: M6 Set contents: 4 pieces eClass: 23300402 Special features Suitable for guide rail mounting Compact block geometry Standardised threaded interface Vertex quality manufacturing FAQ What materials is this block made from? The block is manufactured from S45C steel, offering balanced toughness and machinability for workshop and light industrial use. Is the block compatible with standard T‑slot rails? Yes, the unit is designed for M6 T‑nut fastening and is compatible with common T‑slot rail systems. How is the product supplied and what is the SKU? The item is supplied as a set of 4 blocks and is listed under SKU 16TO14 by Vertex. Can the block be used in confined machine beds? Its 16×20×14 mm footprint and compact profile make the block suitable for tight assemblies where space is limited. Where can Vertex blocks be sourced for European workshops? Vertex blocks such as the 16TO14 are available via Metav Werkzeuge, which provides centralised distribution and stock management for European customers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust combination of S45C construction, compact 16 x 20 x 14 mm dimensions and an M5 T‑slot for straightforward installation; the set of four blocks keeps assembly time low and inventory simple. Order the guide rail blocks directly via Metav Werkzeuge or ask the consultants for clarification. Block for Guide Rail 14TO16 — S45C construction, M5 T‑slot A Block for Guide Rail 14TO16 engineered for precise alignment and secure clamping in linear guide and rail systems, suitable for workshop and production environments Compact 16 x 20 x 14 mm footprint Made from durable S45C steel M5 T‑slot for standard mounting Delivered as a set of 4 pieces Durable steel construction for consistent alignment The small clamping element is manufactured from S45C, a medium‑carbon steel chosen for its balanced combination of hardness and machinability. This material choice gives the component reliable wear resistance and dimensional stability under repeated clamping cycles, contributing to consistent precision in linear guide assemblies. The compact 16 x 20 x 14 mm form factor reduces interference in dense setups while maintaining a stable contact surface for guided motion. Fast mounting and reduced assembly time Equipped with an M5 T‑slot thread, the element is compatible with common guide‑rail hardware and standard fasteners, enabling quick integration into existing fixtures. Delivered in a set of 4, the pack supports simultaneous replacement or multi‑point mounting, cutting downtime and simplifying parts management. The modest mass (approx. 0.12 kg) per set minimises shipping and handling effort and makes storage straightforward for production lines and maintenance trolleys. Engineered for workshop reliability and traceability Produced by Vertex, the component adheres to standardised production practices, supporting reproducible fitting and interchangeability across batches. The compact part supports accurate positioning and stable clamping forces in a small footprint, which helps to reduce setup variability and scrap rates in machining or assembly processes. Identification via SKU 14TO16 and GTIN 4061905093852 ensures traceability in procurement and inventory systems. Secure reliable alignment with Vertex guide rail blocks (SKU 14TO16) — contact Metav Werkzeuge in Emmerich for tailored supply and technical advice Technical data SKU: 14TO16 GTIN: 4061905093852 Material: S45C Dimensions: 16x20x14mm Weight: 0.12 kg Pieces per set: 4 T‑slot/thread: M5 ECLASS: 23300402 Facts Dimensions: 16 x 20 x 14 mm Weight: 0.12 kg Pieces per set: 4 T‑slot: M5 SKU: 14TO16 GTIN: 4061905093852 Special features Material: S45C steel Designed for guide rail/clamping applications Manufacturer: Vertex FAQ What material is the block made from? The block is produced from S45C steel, offering a balance of hardness and machinability suitable for guided clamping applications. How is the block mounted to a guide rail? Mounting is achieved via an M5 T‑slot thread, compatible with standard fasteners used in guide‑rail assemblies. How many pieces are included in the supply unit? The item is supplied as a set of 4 pieces, which simplifies multi‑point installation and replacements. Can the part be identified for inventory control? Yes, the component is traceable by SKU 14TO16 and GTIN 4061905093852 for procurement and stock management. Who manufactures this guide rail block? The block is manufactured by Vertex, produced to standardised specifications for consistent performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from precise alignment, robust S45C construction and compact dimensions to keep fixture setups consistent and easy to maintain. Order the Block for guide rail (16TO16) directly via (Metav Werkzeuge) or ask our consultants if needed. Block for guide rail — compact, S45C steel guide block by Vertex, M6 T‑slot A Block for guide rail designed to secure and space linear guide rails in modular fixtures and jigs for workshop and production use. Precision-machined S45C steel Compact 16×22×10 mm format Set of 4 for consistent spacing T-slot M6 for secure mounting Reliable alignment and straightforward mounting Precisely machined contact faces and a standard M6 T‑slot provide repeatable positioning and secure clamping for linear guide systems. The arrangement as a set of 4 delivers uniform spacing across multiple attachment points, reducing setup iterations and minimising misalignment. The design focuses on functional reliability so that fixture assembly and routine replacement remain efficient and predictable, supporting lean production workflows. Durable steel construction that suits workshop demands The component is produced from S45C, a medium‑carbon steel selected for its favourable balance of strength and machinability. This material choice supports resistance to routine mechanical stress while allowing uncomplicated post‑machining when custom adjustments are required. As a Vertex part, the item benefits from consistent manufacturing tolerances and industrial quality control so that each piece behaves predictably within guiding and fixturing applications. Compact dimensions for flexible fixture design With overall dimensions of 16×22×10 mm and a mass of 0.09 kg, the unit integrates into tight assemblies without adding unnecessary bulk. The small footprint allows high‑density placement on guide rails and makes the component suitable for modular fixtures, prototypes and space‑constrained machinery. The lightweight nature contributes to reduced dynamic loads where multiple guide blocks are employed, helping to maintain accuracy across serialised setups. Choose Vertex guide blocks for dependable alignment and contact Metav Werkzeuge in Emmerich for tailored advice and efficient supply Technical data Article number: 16TO16 GTIN: 4061905090028 Manufacturer: Vertex Facts Dimensions: 16×22×10 mm Weight: 0.09 kg Pieces per set: 4 T‑slot: M6 Special features Material: S45C Set: yes Eclass: 23300402 FAQ Can this block be used with standard linear guide rails? The Block for guide rail (Vertex, SKU 16TO16) is intended for use as a guide or spacer on linear rail systems and fits mounting arrangements that accept an M6 T‑slot. What material is the component made from? The guide block is manufactured from S45C steel, chosen to balance strength and machinability for workshop applications. Is the product supplied individually or as a set? This item is supplied as a set of 4, allowing consistent spacing and matching tolerances across multiple mounting points. What are the exact dimensions and weight of the block? Dimensions are 16×22×10 mm and the mass is 0.09 kg, suitable for compact and lightweight fixture designs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust M24x3P threading, heat-treated steel construction and a compact 175 mm length for secure, repeatable clamping in workshop and production environments; order directly via Metav Werkzeuge or ask our consultants for specification support. Clamping screws — Vertex M24x3P hardened fastening screw, 175 mm The Clamping screws is a hardened fastening element intended for securing fixtures, jigs and workpieces in machining and assembly operations, combining coarse metric threading with a durable steel body for consistent restraint. Hardened steel construction Coarse M24x3P thread for strong grip Length 175 mm for deeper clamping reach Faster, more reliable set-ups with robust engagement The coarse M24x3P thread and heat-treated steel body deliver a reliable mechanical connection that reduces slippage and repeated retorquing during production. By relying on a single, sturdy fastening element, fixture assembly becomes more predictable; the combination of thread form and material hardness ensures a secure bite into mating components, lowering the risk of micro-movement under vibration. This results in fewer interruptions during machining and a smoother workflow on the shop floor. Durable design for repetitive industrial use Constructed from heat-treated steel, the clamp screw resists wear and retains clamping force over long service intervals. The 175 mm overall length provides sufficient reach for many common fixture geometries while keeping the component compact and easy to handle. With a mass of around 0.53 kg, handling and inventory storage remain straightforward. The solid construction reduces the need for frequent replacement, contributing to lower maintenance effort and predictable consumption planning for production environments. Practical integration and procurement advantages Designed for straightforward integration with standard clamping systems, the fastener supports repeatable fixturing routines and simplifies spare-part management. Supplied by a recognised brand, Vertex, and listed under SKU 1387M, the item is suitable for workshops seeking a dependable mechanical solution rather than temporary fixes. Metav’s purchasing and logistics approach supports reliable supply from Emmerich, backed by decades of distribution experience that helps keep production lines supplied with quality components and consistent lead times. Contact Metav Werkzeuge in Emmerich for specification advice or to arrange supply of Vertex clamping screws (SKU 1387M); email info@metav-werkzeuge.com or call +49 2822 7131930 for a tailored recommendation Technical data Article number: 1387M GTIN: 4061905091421 Manufacturer: Vertex Facts Weight: 0.53 kg Length: 175 mm Thread: M24x3P Materials / Special features Material: Heat-treated steel ECLASS: 21022190 Durable design for secure clamping and repeated use FAQ What material is the clamping screw made from? The clamping screw is manufactured from heat-treated steel; the Vertex fastening screw (SKU 1387M) is designed for durability in workshop and production settings. What are the thread and length specifications? Thread specification is M24x3P and the overall length is 175 mm; weight is approximately 0.53 kg. Is this fastening element suitable for repetitive machining applications? Yes, the hardened construction and coarse thread make it suitable for repetitive clamping tasks in machining and assembly processes. How is the item identified for ordering? The component is listed under SKU 1387M and GTIN 4061905091421 for straightforward ordering and stock control. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of heat-treated steel construction, a standard M10×1.5 thread and a 175 mm length for reliable, repeatable clamping in jigs and fixtures. Order the clamping screw directly via Metav Werkzeuge or ask our consultants if further specification data is required. Clamping screw 1337M (M10×1.5, 175 mm) by Vertex The clamping screw 1337M is a heavy-duty fastening element designed for secure clamping in fixtures, jigs and machine setups across industrial and workshop environments. Heat-treated steel for durable clamping Thread M10×1.5 for standard fittings 175 mm overall length for deep engagement Precise manufacturing by Vertex for consistency Robust construction for dependable clamping A forged, heat-treated steel body delivers high deformation resistance and long service life in repetitive clamping applications. The component’s material treatment increases wear resistance and reduces the risk of thread damage during repeated tightening cycles, so the fastener maintains consistent clamping force over time. Such robustness supports uninterrupted production and reduces downtime associated with fastener replacement. Standardised thread for secure integration The M10×1.5 metric thread matches common fixture and tooling standards, enabling straightforward integration into existing assemblies without custom adapters. Standard pitch and diameter ensure predictable torque-to-clamping force behaviour, which is important for process reproducibility in batch production. Clear thread specification simplifies procurement planning and reduces the risk of mismatched components in maintenance routines. Deep engagement and balanced handling With a 175 mm overall length and a mass of approximately 0.09 kg, the fastener affords extended engagement depth where long reach or through-part clamping is required. The geometry is balanced to deliver strength without excessive weight, which eases handling during repetitive operations and supports ergonomic assembly workflows. This combination of length and mass contributes to stable clamping in multi-step machining or assembly processes. Consistent production quality and factory traceability Manufactured by Vertex to consistent tolerances, the fastener benefits production-grade quality control and repeatability. Precision machining and finishing reduce clearance variability and ensure a snug fit in mating components. For procurement departments seeking dependable repeat buys, the documented manufacturing source and SKU simplify inventory management and traceability in regulated environments. Contact Metav Werkzeuge in Emmerich for specification advice and to source the Vertex clamping screw 1337M directly from our European supply hub. Technical data Article number: 1337M GTIN: 4061905094422 Manufacturer: Vertex Facts Weight: 0.09 kg Thread: M10×1.5 Length: 175 mm Special features Material: Heat-treated steel Intended use: Clamping in fixtures and jigs Origin: Vertex production FAQ What thread and pitch does this fastener use? The clamping screw is specified with an M10×1.5 metric thread, suitable for standard M10 fittings in fixtures and tooling. Which materials is the fastener made from? This Vertex clamping screw is manufactured from heat-treated steel, chosen for wear resistance and long-term durability in industrial use. Is the length suitable for deep clamping applications? Yes, the 175 mm overall length provides extended engagement for through-part clamping and deep fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of robust heat-treated steel construction combined with a metric M12x1.75 precision thread and an extended 175 mm length for dependable clamping in workshop fixtures; order the clamping screw directly via Metav Werkzeuge or ask our consultants if needed. Clamping screw »1347M« by Vertex — M12x1.75 thread, 175 mm, heat-treated steel The Clamping screw »1347M« is a heavy-duty fastening element designed for secure fixture and workpiece clamping in industrial and workshop environments, combining thread precision with durable material treatment for consistent performance. Robust heat-treated steel construction Metric M12x1.75 precision thread 175 mm overall length for deep clamping Compact weight 0.13 kg for easy handling Engineered for secure clamping and longevity The component is manufactured from heat-treated steel, a process that increases hardness and wear resistance while maintaining toughness. This treatment means the fastener resists deformation under torque and repetitive load cycles, which results in a longer service life and a lower frequency of replacement. The engineered surface integrity supports consistent clamping force and reduces the risk of thread wear in routine production use. Precision thread for reliable fixture interfaces A metric M12x1.75 thread guarantees compatibility with standard fixture nuts and tapped holes, offering repeatable engagement and reduced play in assemblies. The thread form and pitch are suited to industrial fastening requirements, enabling secure torque transfer and predictable clamp force. For maintenance planning, the standardised thread simplifies procurement and replacement, while the precise form reduces micro-movement that can cause fixture drift over time. Practical dimensions that support versatile applications With an overall length of 175 mm and a nett weight of 0.13 kg, the fastener is suited to deeper clamping positions and applications where reach and manageable handling are both required. The combination of length and balanced mass allows for comfortable manual operation and straightforward integration into automated clamping systems or custom jigs. The geometry supports accessibility in confined setups without compromising mechanical stability. Trusted manufacturing and supply chain confidence Produced by Vertex, the component carries clear product identification and traceability for workshop inventory: SKU and GTIN are provided for streamlined ordering and stock control. Delivered through Metav Werkzeuge, the offering benefits from a quality filter that serves the European market, backed by established logistics and a broad range of complementary precision components for single-source procurement. Contact Metav Werkzeuge for tailored advice and to secure the Vertex 1347M clamping screw through Metav Werkzeuge's specialists Technical Data Article number: 1347M GTIN: 4061905091506 Manufacturer: Vertex Facts Weight: 0.13 kg Length: 175 mm Thread: M12x1.75 Special features Material: Heat-treated steel Category: Vertex ECLASS: 21022190 FAQ What is the thread specification of this clamping screw? The clamping screw is supplied with a M12x1.75 metric thread, suitable for standard industrial fixtures and nuts. Which material is used for the 1347M and what does that mean for durability? The 1347M is made from heat-treated steel, which improves hardness and wear resistance for extended service life under repetitive clamping. Is the 1347M suitable for use in machine jigs and fixtures? Yes, the Vertex 1347M clamping screw is designed for fixture and jig applications where a precise thread and extended reach are required. How can the 1347M be identified when ordering spare parts? Use the article number 1347M or GTIN 4061905091506 when ordering to ensure exact identification and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust heat-treated steel construction, precise M14x2P threading and a 175 mm length ensure reliable clamping and long service life; combine the proven mechanical properties with low mass for efficient fixture changes. Order the part directly via Metav Werkzeuge or consult the team for application advice. Vertex 1347MA Clamping Screw – M14x2P thread, 175 mm A 1347MA clamping screw designed for secure fixture and repeatable clamping in jigs, fixtures and machine setups. Heat-treated steel construction M14x2P precision thread 175 mm overall length Lightweight at 0.18 kg Secure clamping with measurable repeatability The clamping element is manufactured from heat-treated steel, a process that increases surface hardness and wear resistance for repeated tightening cycles. The M14x2P precision thread gives consistent axial force per turn, which translates to reproducible clamp tension and reduced setup variation. For production environments where fixture downtime and part slippage must be minimised, this component delivers the mechanical stability expected in industrial clamping applications. Simple integration into standard fixturing systems With an industry-standard M14x2P thread and an overall length of 175 mm, the screw is compatible with common clamping plates and bespoke fixtures used in metalworking and assembly lines. Its nominal mass of 0.18 kg reduces inertia during manual handling and makes repeated adjustments less fatiguing for operators. The component is therefore suitable for retrofit tasks as well as new fixture designs, enabling straightforward integration without extensive redesign. Low-maintenance performance explained Heat treatment provides the core advantage: improved hardness and fatigue resistance without the need for complex coatings. That results in a component that maintains precision under cyclical loads and resists premature wear. Regular inspection of thread condition and lubrication where appropriate will sustain service life; no specialised maintenance procedures are required beyond standard workshop practices. Efficiency gains for workshop productivity Using a consistently manufactured clamping fastener reduces setup time and scrap risk, improving throughput and lowering per-part labour costs. The combination of durability and repeatable clamping behaviour supports tighter process control and fewer quality deviations. For operations aiming to standardise tooling across multiple workstations, this element contributes to predictable cycle times and simplified spare-part inventories. For specification checks, delivery from stock or application guidance contact Metav Werkzeuge in Emmerich: eMail info@metav-werkzeuge.com | Phone +49 2822 7131930 | WhatsApp +49 170 2837271 — Metav’s specialists will advise on the Vertex 1347MA and suitable fixture solutions Technical Data Article number: 1347MA GTIN: 4061905092787 Manufacturer: Vertex Key Figures Thread: M14x2P Length: 175 mm Weight: 0.18 kg Materials & Features Material: Heat-treated steel Application: Clamping / fixture use Brand: Vertex FAQ What is the main material of this clamping screw? The clamping screw is made from heat-treated steel, providing increased hardness and wear resistance for repeated use. Which thread standard does the part use? The part features an M14x2P precision thread, suitable for common clamping plates and fixtures. Is the 1347MA suitable for retrofit into existing fixtures? Yes, the 1347MA clamping screw from Vertex is compatible with standard fixturing systems and can be integrated without extensive redesign. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of reliable clamping with heat-treated steel, a standard M16 x 2 thread and a 175 mm length that delivers robust fixture retention; order the component directly via Metav Werkzeuge or consult our advisors for integration details. Clamping Screw 1357M – Heat-treated steel, M16 x 2 thread (Vertex) The Clamping Screw 1357M is a heavy-duty clamping bolt designed for secure fixture and jig fastening in workshop and industrial settings Robust heat-treated steel construction Standard M16 x 2 metric thread Length 175 mm for deep clamping Precise fastening with 0.23 kg mass Durable steel construction for long service life The clamping screw is manufactured from heat-treated steel, a process that increases hardness and fatigue resistance so that fixtures maintain clamping force over many cycles. This material treatment reduces wear on the thread and seating faces, which translates into fewer replacements and lower downtime. For production environments where repeatable holding force matters, the treated-steel design supports consistent performance without frequent maintenance. Standard thread and dimensions for straightforward integration Equipped with a M16 x 2 metric thread and a 175 mm overall length, the fastener integrates easily with standard tapped holes and threaded clamping elements. The use of a common thread standard simplifies inventory and ensures compatibility with existing clamping systems and tooling plates. The clearly defined dimensions facilitate planning for toolroom layouts and guarantee predictable clamping reach for deeper workpieces. Stable clamping behaviour and handling benefits The component’s engineered geometry promotes consistent clamping and reliable axial alignment when seated, which helps prevent movement during machining or assembly operations. At 0.23 kg, the part is manageable during setup yet substantial enough to provide the required mechanical stability. The result is improved process reliability and fewer rechecks, supporting smoother workflows in jigs, fixtures and mechanical assemblies. Contact Metav Werkzeuge for purchasing advice on the Vertex clamping screw 1357M and secure supply from our Emmerich quality hub — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 1357M GTIN: 4061905088070 Manufacturer: Vertex Facts Length: 175 mm Weight: 0.23 kg Thread: M16 x 2 Materials and features Product type: Clamping screw Material: Heat-treated steel ECLASS: 21022190 FAQ What thread does the clamping screw use and is it standard? The clamping screw uses a M16 x 2 metric thread, a standard pitch and diameter that is compatible with common tapped holes and clamping components. Is the component suitable for machine tooling and jigs? Yes, the design and heat-treated steel construction make the fastener suitable for use in jigs, fixtures and other clamping applications where repeatable holding force is required. How long is the clamping screw and what reach does it provide? The overall length is 175 mm, providing extended reach for deeper clamping tasks and allowing secure engagement with recessed or thick workpieces. What is the manufacturer and how is product quality assured? The part is supplied by Vertex and carries the SKU 1357M; Vertex production standards and Metav’s distribution in Emmerich act as a quality filter for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact, heat-treated steel construction combined with a M18×2.5 thread and a 175 mm length delivers secure, repeatable clamping where stable fixture engagement is required. Order the clamping screw directly via Metav Werkzeuge or consult our specialists for selection assistance. 1367M clamping screw — M18×2.5 thread, 175 mm (Vertex) A 1367M clamping screw engineered for reliable fixture and adjustment in machine tooling and industrial fixturing. Heat-treated steel for high durability M18 x 2.5 thread for standardised mounting 175 mm length for deeper engagement Precision-machined for consistent clamping Consistent clamping that keeps production running The combination of heat-treated steel and a standard metric thread ensures a robust connection between components and fixtures. The M18×2.5 specification provides compatibility with common clamping systems, reducing the need for adapters or bespoke fittings. Because the fastener is designed for repeatable engagement, cycle‑to‑cycle variation is minimised, which supports stable machining tolerances and fewer reworks — a practical advantage for workshop and production environments seeking steady throughput. Fast integration into existing tooling and fixtures Standardised dimensions simplify assembly and shorten setup times on jigs, fixtures and machine tables. The 175 mm overall length gives a longer engagement range for deeper clamps or thicker workpieces, while the metric thread pitch enables predictable torque settings and secure locking. These characteristics translate into straightforward installation and consistent results across batches, helping to maintain process reliability and reduce unplanned downtime in manufacturing operations. Durability-focused design to reduce maintenance intervals Manufactured from heat-treated steel, the screw is intended to withstand the mechanical stress typical in industrial clamping applications. This material choice contributes to a longer service life and stable clamping force over repeated cycles, which in turn lowers the frequency of replacements and maintenance interventions. When combined with good workshop practice, the part supports efficient maintenance schedules and contributes to overall equipment effectiveness. Contact Metav Werkzeuge for tailored advice on integrating Vertex clamping components into jigs and fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 1367M GTIN: 4061905091544 ECLASS: 21022190 Facts Length: 175 mm Thread: M18 x 2.5 pitch Weight: 0.3 kg Special features Material: Heat-treated steel Manufacturer: Vertex FAQ What thread specification does the clamping screw use? The clamping screw is supplied with an M18×2.5 metric thread, matching common industrial fixtures. What is the main material and its benefit? The 1367M is made from heat-treated steel, offering increased wear resistance and extended service life under repetitive clamping loads. For which applications is this clamping screw suitable? The screw is intended for machine tooling, jig and fixture assembly, and other industrial fixturing tasks where secure, repeatable clamping is required. What are the length and weight of the component? The component measures 175 mm in length and has a weight of 0.3 kg, suitable for deeper engagement scenarios without excessive mass. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust combination of heat-treated steel construction, a precise M20 x 2.5 thread and a 175 mm engagement length to ensure reliable clamping in production fixtures; order the clamping screw directly via Metav Werkzeuge or ask our consultants if needed. Clamping screw – M20 x 2.5 thread, 175 mm, Vertex The clamping screw is a heavy-duty fastening component for fixture and jig applications, designed to deliver consistent axial clamping force in industrial and workshop environments. Heat-treated steel construction Metric thread M20 x 2.5 175 mm length for secure engagement Built for consistent clamping performance The robust design of this fastening element provides steady clamping reliability under repeated load cycles. Manufactured from heat-treated steel, the component maintains shape and preload resilience even when subjected to frequent tightening and release. For workshop planners and production engineers, this means fewer resets and less variability in jig setups, which supports predictable part quality and shorter adjustment times during batch runs. Precision thread and engagement that reduce setup time The M20 x 2.5 metric thread ensures accurate engagement with complementary nuts or threaded bores, translating to reliable axial positioning in assemblies. A defined 175 mm length gives deeper thread engagement where required, improving pull-out strength and reducing the need for additional reinforcement. Explaining the metric specification: the M20 dimension denotes the nominal diameter and 2.5 mm the thread pitch, which together govern compatibility with standardised clamping interfaces. Durability that lowers maintenance intervals Surface finish and material treatment influence lifetime performance. With heat-treated steel as the base material, the fastener resists deformation and wear during intensive use. This durability reduces unplanned maintenance and replacement frequency, supporting continuous production. Where environmental factors matter, selection of appropriate corrosion protection at the assembly stage will preserve function over time and protect system availability. Seamless integration into fixture systems Designed for clamping technology applications, this component integrates into existing workholding setups, modular clamping plates and bespoke jigs. The straightforward metric thread and standard length make it compatible with many industry-standard accessories and adaptors. For procurement departments wanting to consolidate suppliers, the fastener’s compatibility simplifies inventory while maintaining the performance required in precision tooling environments. Contact Metav Werkzeuge to discuss specification matching, delivery options from our Emmerich warehouse or technical advice for fitting the Vertex clamping screw 1377M into specific fixtures Technical data SKU: 1377M GTIN: 4061905088087 Manufacturer: Vertex Core data Material: Heat-treated steel Thread: M20 x 2.5 Length: 175 mm Weight: 0.35 kg Materials & compatibility Suitable for use in clamping technology and fixture assemblies Designed for standard metric-threaded connections Intended for repeated tightening cycles and industrial workshop use FAQ What is the primary application for this clamping screw? The clamping screw 1377M by Vertex is intended for fixture and jig clamping in industrial and workshop environments where repeated, reliable axial clamping is required. Which material is used for the fastener and what benefit does it bring? Manufactured from heat-treated steel, the Vertex clamping screw offers improved wear resistance and dimensional stability, reducing maintenance and preserving clamping performance. Is the thread compatible with standard nuts and threaded inserts? Yes, the M20 x 2.5 thread on the Vertex 1377M matches standard metric M20 fittings and is suitable for common threaded inserts and nuts used in clamping systems. Can this clamping screw be used in corrosive environments? The basic component is heat-treated steel; for corrosive conditions, application-specific surface protection or corrosion-resistant variants should be considered to extend service life. How does the 175 mm length affect fixture design? A 175 mm engagement length provides deeper thread contact and improved pull-out resistance, which is beneficial where stronger axial retention is needed in fixtures and jigs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust combination of heat-treated steel construction and a standard M8 x 1.25 thread to secure fixtures with consistent clamping force; the 175 mm length offers extended reach for deep setups. Order the clamping screw directly via Metav Werkzeuge or consult our specialists for application-specific advice. Clamping screw by Vertex — M8 x 1.25 thread, 175 mm, heat-treated steel A clamping screw engineered for dependable fixture retention in industrial and workshop clamping systems, suitable for standardised machine and workholding applications. Heat-treated steel construction for durability Standard M8 x 1.25 metric thread for wide compatibility 175 mm length for extended reach in fixtures Compact weight of 0.06 kg enables easy handling Consistent retention and wear resistance for production environments The combination of heat-treated steel and a calibrated metric thread provides a reliable hold that reduces the need for frequent replacement. Heat treatment increases hardness and wear resistance, which in turn preserves the clamping face and thread integrity under repeated loading cycles. The M8 x 1.25 thread is a widely used standard, facilitating straightforward replacement and compatibility with common tapped holes and nuts. For production lines and toolrooms, this means fewer stoppages for fastener failure and more predictable clamping behaviour during batch work. Easier integration into clamping systems and fixtures A standardised M8 x 1.25 profile and the 175 mm length make this fastener versatile for a range of fixturing tasks, from securing jigs to clamping larger workpieces where additional reach is required. The metric pitch ensures even load distribution along the thread, which helps maintain preload and prevents loosening under vibration. Where thread engagement depth is critical, the extended length affords flexibility in positioning without resorting to bespoke fasteners. This reduces setup complexity and supports faster changeovers between jobs. Traceability, workshop readiness and supply reliability Lightweight at 0.06 kg and supplied under SKU 1327M, the item is simple to store and quick to pick for routine maintenance or kitting. The manufacturer’s identification and GTIN provide clear traceability for quality control and procurement records. Sourcing through an experienced distributor ensures a consistent supply chain: Metav Werkzeuge acts as a quality filter for the European market, combining broad stock availability with specialist advice so workshops can rely on performance and delivery. This approach supports operational continuity and reduces the administrative burden of multi-supplier sourcing. For robust, standardised clamping in demanding workshop and industrial settings, contact Metav Werkzeuge for procurement and application guidance on the Vertex clamping screw — trusted performance, traceable supply from Emmerich. Technical data SKU: 1327M GTIN: 4061905091124 Eclass: 21022190 Core technical data Length: 175 mm Thread: M8 x 1.25 Weight: 0.06 kg Materials & features Material: heat-treated steel Thread form: metric coarse pitch Manufacturer: Vertex FAQ What thread size does this clamping screw use? The clamping screw is supplied with an M8 x 1.25 metric thread, matching common tapped holes and nuts for wide compatibility. Is the material suitable for frequent industrial use? Yes, the fastener is made from heat-treated steel, which increases hardness and wear resistance for repeated clamping cycles in workshop and production environments. What is the overall length and how does that affect application? The overall length is 175 mm, providing extended reach for deeper fixtures and flexible positioning in clamping systems. How can I identify the correct article when ordering? Order by SKU 1327M or the GTIN 4061905091124 to ensure the correct clamping screw from Vertex is supplied. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the modular clamping concept and 0.01 mm repeatability to increase process reliability while keeping set-up times low; order the unit directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Vertex VMP-77D modular machine vice — high-precision 0.01 mm repeatability, compact footprint The VMP-77D modular machine vice is a precision clamping solution designed for machining environments, combining a flexible modular concept with a compact body for stable workholding on milling machines and machining centres. Modular clamping concept 0.01 mm repeatability Robust 42.4 kg construction Compact 175×240×118 mm footprint Consistent accuracy for repeatable machining The vice delivers repeatable clamping at 0.01 mm, which reduces variation across batches and minimises rework. The precise tolerance control provided by the design translates into stable cutting conditions and a predictable surface finish, allowing reliable batch production. The emphasis on precision supports quality assurance procedures and simplifies integration into inspection routines. Stable, modular construction that adapts to the task A modular approach offers flexibility for varied fixturing requirements while the substantial mass contributes to vibration damping and firm clamping. The compact footprint of the unit helps save table space without compromising rigidity, enabling more efficient use of machine bed area. This combination of adaptability and robustness supports quicker set-ups and repeatable results in mixed-production environments. Practical operation and procurement confidence The vice’s form factor and construction favour straightforward handling and integration into existing workflows. Procurement through Metav Werkzeuge provides the additional assurance of a European quality filter and dependable logistics from Emmerich, backed by long-term experience in precision tooling. The pairing of a proven clamping concept with reliable supply reduces sourcing complexity for workshops and production facilities. For tailored advice on implementing Vertex modular clamping solutions, contact Metav Werkzeuge for application guidance and reliable supply from our Emmerich hub — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VMP-77D GTIN: 4061905091209 Manufacturer: Vertex Machinery Works Co., Ltd. eClass: 21020601 ETIM: EC002173 Facts Accuracy: 0.01 mm Weight: 42.4 kg Dimensions: 175 x 240 x 118 mm Special features Modular design for flexible fixturing Type: Modular Category: Vertex FAQ What level of precision can be expected from this vice? The VMP-77D from Vertex provides repeatable clamping accuracy of 0.01 mm, suitable for precision machining and tight tolerance work. Is the vice suitable for use on milling machines and machining centres? Yes, the modular machine vice is designed for machining environments and integrates on typical milling machine tables and machining centres. How does the modular design benefit workshop workflows? Modularity allows flexible fixturing and faster reconfiguration, enabling the vice to adapt to different parts and reducing set-up times on the shop floor. What are the physical dimensions and weight of the unit? The vice measures 175 x 240 x 118 mm and weighs 42.4 kg, providing a compact yet stable footprint for machine tables. Who manufactures the VMP-77D and where is it sourced from? The VMP-77D is manufactured by Vertex; supply and distribution can be arranged via Metav Werkzeuge for European customers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a modular approach to heavy-duty workholding and the proven 0.01 mm repeatability for consistent batch results; combine these attributes with the vice’s inherent mass for reduced vibration and steady cuts. Order the unit directly via Metav Werkzeuge or consult our specialists for application-specific configuration. VMP-7L Modular machine vice by Vertex — 0.01 mm accuracy, compact footprint The VMP-7L is a modular machine vice designed for secure workholding in milling centres and general machining applications, offering precise clamping and flexible configuration. Modular configuration for flexible set-ups High precision with 0.01 mm repeatability Solid mass ensures vibration damping Precision that reduces rework and increases throughput The modular workholding system delivers a high level of precision, with verified 0.01 mm repeatability that supports tight tolerances on serial production runs. The vice’s design focuses on minimising movement between clamping cycles, which translates into fewer scrapped parts and less rework. For operators and engineers seeking measurable efficiency gains, the combination of dependable repeatability and a compact footprint makes this solution suitable for small-batch jobs as well as repetitive machining tasks, where consistent part geometry is essential. Flexible modularity for changing production demands A modular design enables rapid reconfiguration of the vice to match different component geometries and clamping strategies without the need for multiple fixed vices. The adaptable layout reduces set-up times and supports a greater variety of workpieces from the same clamping base. The unit’s substantial mass contributes to stable machining conditions, improving surface finish and tool life by dampening vibrations during cutting operations. Clear dimensional data facilitates integration into existing fixtures and machine tables. Reliable supply and service from a trusted partner Metav combines long-standing sector expertise with a broad stock range, ensuring access to compatible components and replacement parts when required. The distribution hub in Emmerich acts as a quality filter for the European market, supporting dependable delivery and a simplified procurement process. For procurement managers and workshop leads, the documented performance and the supplier’s track record reduce uncertainty, making this vice a pragmatic choice for enhancing workshop capability and maintaining production continuity. Contact Metav Werkzeuge for tailored advice on the Vertex VMP-7L modular machine vice and to discuss configuration options — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VMP-7L GTIN: 4061905094347 Manufacturer: Vertex Type: Modular Key figures Dimensions: 175x240x118 mm Accuracy: 0.01 mm Weight: 42.4 kg Features Modular design Compact footprint for machine table integration Built for stable clamping and vibration damping FAQ What level of accuracy can be expected from this vice? The VMP-7L achieves an accuracy of 0.01 mm, providing the repeatability needed for tight-tolerance machining tasks. Is the vice suitable for milling centre applications? Yes — the modular machine vice from Vertex is designed for milling centres and comparable machining environments where secure clamping and repeatability are required. How heavy is the unit and why does that matter? The vice weighs 42.4 kg, a mass that helps damp vibrations and contributes to improved surface finish and tool life during machining. Can the clamping arrangement be changed for different workpieces? The modular design permits flexible set-ups and quicker reconfiguration, reducing set-up times for varied component geometries. What are the external dimensions for planning fixture space? The overall dimensions are 175x240x118 mm, which supports straightforward integration into many machine tables and fixture layouts. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact clamp that combines adjustable height 0–100 mm, a copper platen and secure fit for 18 mm T‑slots to streamline batch fixturing. The precise 1.5 kgf clamping force and M16 bolt interface support repeatable setups; order the clamp directly via Metav Werkzeuge or consult our advisors for application-specific advice. VCB-405 clamp by Vertex — adjustable height 0–100 mm, copper platen VCB-405 is a compact workshop clamp designed for secure fixturing in machine tables and fixtures; suitable for 18 mm T‑slot applications and available in U‑shaped or rotatable configurations. Adjustable height 0–100 mm Includes copper platen Compatible with 18 mm T‑slot Clamping force 1.5 kgf Reliable fixturing for repetitive machining The clamp offers a robust solution for standard workshop fixturing where repeatability matters. With an adjustable height range of 0–100 mm, the device allows fine vertical positioning without requiring shims, reducing setup time and scrap. The combination of a compact footprint and M16 x 6" bolt interface permits straightforward integration into existing tool tables and fixture plates, supporting consistent clamping across production runs. Gentle workholding with a copper platen The integrated copper platen protects delicate workpiece surfaces while distributing clamping pressure evenly. For components that are prone to marking, the softer contact surface minimises cosmetic damage and reduces the need for secondary finishing. This design choice enhances part quality in small‑batch production and repair work where preserving surface condition is as important as holding strength. Adaptable geometry for mixed operations Available in an optional U‑shape or rotatable version, the clamp adapts to different workpiece geometries and machining directions. The rotatable variant allows angular alignment for fixtures that require non‑axial clamping, while the U‑shaped option provides low‑profile engagement for narrow parts. Such adaptability reduces the number of bespoke clamps required, streamlining inventory and tooling costs. Compact mass and clear compatibility data With a mass of 2.7 kg, the clamp is heavy enough to convey solidity yet light enough to be repositioned manually on benches and tables. Compatibility with 18 mm T‑slots and the specified M16 x 6" bolt means it fits common machine table standards without additional adapters. These clear, measurable parameters support fast purchasing decisions and predictable assembly in workshop setups. Practical benefits for everyday workshop use Engineered for dependable everyday use, the product balances ease of handling with functional durability. The modest 1.5 kgf clamping force suits secure holding of lightweight to medium components while the machine‑grade construction reduces wear over frequent cycles. For workshop managers seeking a simple, repeatable clamping element, the unit offers a pragmatic mix of protection, adjustability and standardised mounting. Contact Metav Werkzeuge to discuss how the Vertex VCB-405 clamp can be integrated into current fixturing and to reserve available stock for your workshop. Technical data SKU: VCB-405 GTIN: 4061905094613 eClass: 21049022 Core data Dimensions: 133 x 50 x 49 mm Weight: 2.7 kg Adjustable height: 0–100 mm T‑slot compatibility: 18 mm Clamping force: 1.5 kgf Bolt: M16 x 6" Special features Copper platen included Optionally U‑shaped or rotatable Brand: Vertex FAQ What materials and workpieces is the clamp suited for? The clamp is intended as a general-purpose workholding element; the VCB-405 clamp by Vertex performs well on standard metal and non-abrasive materials where a moderate clamping force and surface protection from the copper platen are required. Is the height adjustment tool-free or does it require tools? Height adjustment requires conventional workshop tools to lock the chosen position; the adjustable height 0–100 mm feature on the Vertex VCB-405 provides precise positioning once secured. Can the clamp be used on non-standard table slots? The clamp is designed for 18 mm T‑slot tables; for non‑standard slot sizes, additional adapters may be necessary to ensure correct mounting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a compact clamp that combines precise fitment for 18 mm T-slots, an M16 fastening interface and a lightweight profile for faster fixture changes and secure machining. Order directly via Metav Werkzeuge or consult our specialists for application advice and rapid supply. Step Clamp – Vertex compact step clamp with 18 mm T-slot compatibility and M16 bolt The Step Clamp is a compact workholding clamp designed for machining fixtures and CNC setups, engineered to fit standard 18 mm T-slots and to accept an M16 bolt for reliable clamping. Compact dimensions 32x64x16 mm Compatible with 18 mm T-slots M16 bolt interface for secure fastening Lightweight at 0.16 kg for easy handling Precision clamping for reliable setups The compact design of this step clamp delivers repeatable positioning in fixture assemblies by occupying minimal space while offering a defined clamp surface. With the 32x64x16 mm footprint and a standard 18 mm T-slot engagement, the element reduces obstruction in multi-station jigs and simplifies part access during machining. The M16 threaded interface provides a conventional fastening solution that is widely compatible with common clamping bolts and studs, ensuring stable force transmission without the need for special adapters. This combination promotes shorter setup times and consistent part quality. Compatibility that speeds fixture changeovers Designed as a universal step clamp, the component streamlines changeovers in production by matching widely used T-slot sizing and bolt standards. The reliance on an M16 connection means existing clamping hardware can be reused, lowering inventory complexity and reducing procurement lead times. Because the unit is purposely compact and light, workshop personnel can reposition clamps quickly when reconfiguring fixtures, improving throughput during batch changes. The geometry supports straightforward alignment with stop and locating elements common in machining fixtures. Compact design for lasting workshop performance A minimal weight of 0.16 kg and robust geometry make this clamp an unobtrusive yet durable workholding choice. The small form factor limits interference with cutting tool paths and helps maintain clear sightlines for measurement and quality checks. Built by Vertex, the component is suited to general CNC and manual milling environments where space efficiency and reliable fastening are priorities. The design focuses on practical workshop benefits rather than decorative features, offering predictable behaviour under routine clamping loads. Contact Metav Werkzeuge for specification matching, volume procurement or tailored advice based on Vertex clamping solutions and SKU 6215 Technical Data Article number: 6215 GTIN: 4061905093401 ECLASS: 21170107 Dimensions & Weight Dimensions: 32x64x16 mm Weight: 0.16 kg Compatibility & Fastening T-slot: 18 mm Bolt size: M16 Manufacturer: Vertex FAQ What T-slot size does the Step Clamp fit? The Step Clamp is designed for an 18 mm T-slot and engages securely in standard 18 mm machine table slots. Which bolt thread is required for fastening? Fastening is via an M16 thread; the Step Clamp accepts standard M16 bolts or studs for reliable clamping. What are the external dimensions and weight? Dimensions are 32x64x16 mm and the mass is 0.16 kg for the Step Clamp (SKU 6215). Is this clamp suitable for CNC fixtures and manual milling tables? Yes, the Step Clamp is intended for fixture use across CNC and manual milling setups where compact workholding and standard bolt interfaces are required. Which classification does this product use for procurement systems? The component is listed under ECLASS 21170107 for consistent catalogue and procurement identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Efficient workholding with reliable clamping and compact dimensions ensures stable setups in short cycle times; combine the M16 stud and 18 mm T-slot compatibility for versatile fixture layouts and order via Metav Werkzeuge or consult our specialists for application advice. Step Clamp – Compact workholding for 18 mm T-slots (M16 stud) The Step Clamp is a compact workholding element designed for securing parts on 18 mm T-slot tables using an M16 stud. Compact 38 x 100 x 19 mm body M16 stud for standard clamping Fits 18 mm T-slot tables Lightweight 0.39 kg for easy handling Faster, more reliable set-ups for small-batch production High-precision machining benefits from rapid, repeatable clamping. The step clamp offers a compact footprint combined with a standard M16 fixing, which reduces setup time when exchanging fixtures or reconfiguring jigs. The low mass and slim profile enable quick repositioning, while the design supports secure seating on an 18 mm T-slot, helping to maintain workpiece stability during light to medium machining tasks. This contributes to higher throughput without compromising positional integrity. Clear compatibility and practical specifications for integration Integration into existing workstations is straightforward thanks to the clearly defined measurements: 38 x 100 x 19 mm overall size and 18 mm T-slot compatibility. The use of a standard M16 stud means the clamp fits common clamping kits and modular fixture systems, minimising the need for custom adaptors. At 0.39 kg, the component is easy to handle during fixture build-up and makes modular fixturing more ergonomic for operators who reconfigure setups frequently. Durable, precise performance aligned with workshop needs Although the raw data does not specify material or coating, the geometry and fastening method prioritise repeatable precision and robust seating. The compact design supports a lower profile clamping strategy, useful where clearance to the cutter is limited. For users seeking a balance between compactness and dependable clamp force, this component provides a practical solution that complements modular fixturing strategies and supports consistent part quality across production runs. Contact Metav Werkzeuge in Emmerich for tailored procurement advice and specification support — request details for the Step Clamp (SKU 6225) to ensure fit with your fixture system and 18 mm T-slot tables. Technical data Article number: 6225 GTIN: 4061905093333 Manufacturer: Vertex Facts Dimensions: 38 x 100 x 19 mm Weight: 0.39 kg T-slot width: 18 mm Bolt: M16 ECLASS: 21170107 Special features Compatible with 18 mm T-slots Compact step clamp design SKU 6225 Brand: Vertex FAQ What T-slot size does this clamp fit? The clamp is designed for 18 mm T-slot tables and locates securely in that standard slot width. Which thread or bolt is required to fasten the clamp? The component uses an M16 stud/fixing for clamping and integration into modular fixtures. What are the overall dimensions and weight of the clamp? Dimensions are 38 x 100 x 19 mm and the weight is 0.39 kg, suitable for easy handling during fixture setup. Is the clamp suitable for heavy-duty machining? The product data does not specify maximum load or material properties, so suitability for heavy-duty applications cannot be confirmed from the provided information. Who manufactures this clamp and what is the SKU? This clamp is manufactured by Vertex and is listed under SKU 6225 with GTIN 4061905093333. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of compact dimensions and a robust M16 clamping bolt for reliable hold-down in constrained fixtures; the Step Clamp combines stable mass with standard T-slot compatibility for consistent repeatability. Order the Step Clamp directly via Metav Werkzeuge or consult our team for application advice. Step Clamp – Vertex step clamp with M16 bolt and 18 mm T-slot compatibility Step Clamp is a compact clamping element for securing workpieces in machine table T-slots; designed for fixturing and general workholding where space and repeatable clamping are decisive Compact profile 38 x 150 x 22 mm Suitable for 18 mm T-slot M16 clamping bolt for high hold-down force Weighs 0.71 kg for stable clamping Secure hold-down for compact fixtures The compact profile and balanced mass yield stable clamping without occupying excessive table space. With overall dimensions of 38 x 150 x 22 mm and a mass of 0.71 kg, the component reduces vibration and improves machining repeatability in small- to medium-size workholding setups. The standard M16 bolt delivers a predictable clamping force that is compatible with common clamping hardware, supporting reliable part retention during milling, drilling or light machining operations. Faster set-up and consistent alignment A step-style design shortens fixture set-up times by providing defined contact geometry and repeatable seating. The compatibility with an 18 mm T-slot removes guesswork during positioning and allows straightforward integration into existing fixture plates. Because clamping force and contact height are predictable, inspection intervals and rework can be reduced, contributing to measurable efficiency gains on the shop floor and more consistent part quality over production runs. Easy integration into standard fixturing systems Intended for use in conventional fixturing applications, the clamp adapts to common machine tables and modular fixtures without special adapters. The concise form factor preserves table real estate while enabling secure hold-down for a variety of workpiece sizes. Supplied by the established Vertex brand, the component is suitable where compact, dependable clamping is required and where repeatability contributes directly to process reliability and throughput. For secure, space-saving clamping solutions from Vertex, contact Metav Werkzeuge in Emmerich for ordering and technical guidance delivered from our European warehouse. Technical data SKU: 6235 GTIN: 4061905093654 ECLASS: 21170107 Facts Dimensions: 38 x 150 x 22 mm Bolt: M16 T-slot compatibility: 18 mm Weight: 0.71 kg Special features Manufacturer: Vertex Intended for fixturing and workholding applications FAQ Are these clamps compatible with standard machine table T-slots? The clamp is compatible with an 18 mm T-slot; the Vertex Step Clamp (SKU 6235) is sized for standard 18 mm slot systems to simplify fixture layout. What bolt size is required for installation? Installation uses an M16 clamping bolt, providing consistent and robust hold-down capability for common clamping procedures. How much does the clamp weigh and how does that affect stability? With a mass of 0.71 kg, the component offers sufficient inertia for stable clamping, aiding vibration damping and repeatable part location. Is the Vertex Step Clamp suitable for precision fixtures? Yes, the Step Clamp from Vertex is designed for repeatable seating and predictable clamping, making it suitable for precision fixturing in many machining applications. Where can technical drawings and images be found? Technical drawings and detailed images are provided with the product listing; reference SKU 6235 when consulting documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of M16 thread, compatibility with 18 mm T-slots, and compact 17.7 x 32 x 11 mm dimensions for reliable fixture retention; order the fastening element directly via Metav Werkzeuge or consult the technical advisors for assistance. 3415M T-slot nut — M16 thread, for 18 mm T-slots (Vertex) A 3415M T-slot nut designed for clamping and fixturing tasks on machine tables with an 18 mm T-slot, supplied as a single-piece fastening element. M16 thread for standard clamping bolts Fits 18 mm T-slots on machine tables Single-piece design for straightforward installation Compact 17.7 x 32 x 11 mm dimensions Secure clamping where precision matters The M16 threaded profile and compatibility with 18 mm table slots make this fastening component a practical choice for workshop fixturing. Engineered to sit flush within the slot, the element ensures a stable contact point for clamping bolts and fixtures, reducing lateral movement during machining operations. Clear numerical specification of the dimensions supports precise planning of clamp layouts and toolpaths, while the standard thread size allows use with commonly available clamping hardware. Fast, repeatable set-up with a compact design A single-piece construction keeps installation steps to a minimum and simplifies inventory management. The compact 17.7 x 32 x 11 mm footprint permits close spacing of clamping points and contributes to efficient use of table real estate. Reduced assembly complexity shortens set-up times and supports higher throughput, which is a direct operational advantage for production environments where time and reproducibility are critical. Practical fit for clamping technology and fixtures This fastening element is tailored for machine tables and modular fixturing, enabling precise positioning of workpieces or accessories. The combination of standard M16 thread and slot compatibility facilitates integration into existing clamping systems without the need for custom adapters. Clear labelling and identification help maintain order in stores and on the shop floor, assisting procurement and maintenance teams to source the correct part rapidly. Contact Metav Werkzeuge to discuss the Vertex 3415M T-slot nut and secure the right components for reliable clamping from our Emmerich warehouse. Technical Data Article number: 3415M GTIN: 4061905089596 Designation: T-slot nut Version: single Facts Dimensions: 17.7 x 32 x 11 mm Thread: M16 T-slot width: 18 mm ECLASS: 21029107 Special features Single-piece fastening element Compatible with standard clamping bolts Compact format for tight fixture spacing FAQ What thread size does this T-slot nut use? The Vertex 3415M T-slot nut is supplied with an M16 thread suitable for standard clamping bolts and fittings. Which T-slot width is the nut designed for? This fastening element is designed to fit an 18 mm T-slot on machine tables and modular fixturing systems. Is the part supplied individually or in sets? The item is listed as a single version; the Vertex 3415M is supplied as an individual T-slot nut. What are the exact external dimensions of the nut? Dimensions are 17.7 x 32 x 11 mm, which supports compact clamping arrangements and accurate layout planning. How can this component be identified for ordering or inventory? Use the article number 3415M or GTIN 4061905089596 when ordering the Vertex T-slot nut to ensure correct procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of a modular component range, M16-2.0P thread compatibility and an 18 mm T-slot fit delivers dependable, efficient workholding for general machining; order the kit via Metav Werkzeuge or contact the consultants for application advice. Clamping Tool Set CK-16 – Vertex — modular workholding for T-slot tables, M16 thread and extensive accessory range The Clamping Tool Set CK-16 is a compact, workshop-ready kit designed for secure fixture and workholding on standard T-slot tables across general machining and maintenance tasks. Modular components for versatile workholding M16-2.0P threaded bolts for standard fixtures Compatible with 18 mm T-slot tables Robust construction, total weight 12.6 kg Faster, more reliable set-ups for standard machine tables A modular clamping kit minimises fixture time by offering matched parts for repeatable installation. The M16-2.0P threaded bolts and 18 mm T-slot compatibility ensure straightforward integration with most machine tables, reducing cycle loss from re-clamping. By standardising on commonly used threads and T-slot sizes, the kit supports consistent clamping force and predictable repeatability, which leads to improved process throughput and fewer interruptions during small-batch or jobbing work. Organised components for consistent results and quick changes The kit contains a full range of bolts in both imperial and metric lengths together with T-nuts, couplings, flanges, clamps and blocks, all stored for easy identification and transport. This arrangement improves setup discipline and reduces the search time for matching parts on the shop floor. The set’s design supports modular combinations, enabling straightforward adaptation to diverse workpieces while maintaining clamping accuracy and repeatability — a practical advantage for mixed-production environments. Practical balance between portability and workshop readiness With a total mass of 12.6 kg, the set is substantial enough to feel robust yet compact for storage beside a machine table. The kit is suitable for routine fixture tasks where standard T-slot engagement is required and where a single, organised solution reduces tooling complexity. The 52-piece composition offers both variety and cohesion, making the set a pragmatic choice for maintenance shops, training workshops and small production cells seeking dependable, easy-to-manage clamping solutions. Contact Metav Werkzeuge in Emmerich for a tailored quotation and technical advice on the Vertex CK-16 clamping kit Technical data SKU: CK-16 GTIN: 4061905092619 eClass: 21041790 Manufacturer: Vertex Facts Weight: 12.6 kg T-slot width: 18 mm Bolt thread: M16-2.0P Pieces per set: 52 Included components Range of bolts in imperial and metric lengths T-nuts for 18 mm T-slots Couplings and flanges Clamps and blocking elements Modular design for standard workholding FAQ What T-slot size is this kit compatible with? The kit is designed for 18 mm T-slot tables; components such as T-nuts and flange pieces match that slot dimension for secure seating. Which thread size do the bolts use? The bolts supplied in the set use M16-2.0P threading, matching standard fixture practices for many machine tables and clamping systems. Is the kit suitable for a training workshop or small production cell? Yes, the organised composition and breadth of components make the clamping kit appropriate for training environments and small production cells where variety and repeatability are required. Does the set include clamps and blocks in addition to bolts? The clamping kit includes matching clamps, flanges, couplings and blocking elements alongside bolts and T-nuts to support a range of fixturing layouts. What is the total weight of the clamping kit? The complete set has a total weight of 12.6 kg, which balances portability with workshop durability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust FC25 cast-iron construction combined with a 45° swivelling table top provides stable, versatile fixturing for precise machining and measurement. The compact 180 x 255 mm work surface and a rated load of 10 kg make this clamping table especially suited to small components and inspection tasks; order directly via Metav Werkzeuge or consult their specialists for application support. VP-250 Clamping table (45° swivel) — Vertex, 180 x 255 mm work surface A VP-250 clamping table engineered for accurate fixturing and angled set-ups in workshop and inspection environments. Swivelling table top 45° for angled clamping Compact 180 x 255 mm work surface Cast iron FC25 body for stable mounting Rated load 10 kg with 28.7 kg base weight Increased accuracy through mass and material The substantial construction, made from FC25 cast iron and weighing 28.7 kg, increases mass at the fixture so that cutting or measuring forces are absorbed rather than transferred to the part. This inherent vibration damping improves repeatability and reduces surface defects, which in turn lowers scrap rates and rework. For small-batch production and precision inspection, the greater stability delivered by the heavy base translates directly into measurable gains in precision and consistent part quality. Faster angled set-ups and reduced processing time A swivelling top that locks at 45° enables angled milling, drilling and inspection without repeated reclamping or auxiliary fixtures. The 180 x 255 mm work surface allows secure mounting of small jigs and components while preserving visibility for measurement tasks. By reducing the number of intermediate repositions and simplifying workholding, the overall workflow benefits from reduced set-up time and increased throughput, helping workshops maintain steady production rhythms. Practical dimensions and reliable load support With a nominal height of 136 mm and a rated load of 10 kg, the unit suits bench-mounted installations and integrates easily into existing inspection setups. The combination of compact footprint and robust load capacity supports a wide range of small components while keeping the clamping table accessible for manual adjustment and measuring tools. Built by a well-established manufacturer, this workholding solution is intended for day-to-day use and long-term reliability in demanding shop-floor conditions. For reliable angled fixturing select the Vertex VP-250 clamping table and contact Metav Werkzeuge for tailored application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific tasks Technical data Article number: VP-250 GTIN: 4061905093777 Manufacturer: Vertex ECLASS: 21020702 Core specifications Weight: 28.7 kg Height: 136 mm Work surface: 180 x 255 mm Maximum load: 10 kg Materials & special features Material: FC25 (cast iron) Swivelling table top: 45° Messtisch: 180 x 255 mm SKU: VP-250 FAQ What is the maximum load capacity? The VP-250 clamping table by Vertex is rated for a maximum load of 10 kg, suitable for small components and inspection fixtures. Can the table be set to an angle for milling or drilling? Yes, the VP-250 features a swivelling top that locks at 45°, enabling angled machining and measurement without additional fixtures. What are the top dimensions suitable for workpieces? The work surface measures 180 x 255 mm, providing space for small jigs, gauges and components commonly used in inspection and light machining. What material is the clamping table made from and why does it matter? The table is made from FC25 cast iron; this material offers mass and damping that reduce vibration during machining, improving repeatability and surface finish. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of a rotating base, compact 180 x 290 mm table and a secure T-slot 16 mm for reliable fixture flexibility in medium‑duty machining. Order the clamping table directly via Metav Werkzeuge or consult the team for application advice. VP-250S Clamping Table – rotating base, swivel indexing by Vertex The VP-250S is a compact clamping table with a rotating base and swivel indexing, designed for precise positioning and flexible fixturing in machine shops and toolrooms Robust rotating base with swivel function Table surface 180 x 290 mm T-slot 16 mm for secure fixture Solid mass: 36 kg adds stability Greater positional accuracy for complex setups The combination of a rotating base and swivel indexing provides a clear benefit for angular machining tasks: faster alignment and repeatable positioning reduce setup time and minimise rework. The compact 180 x 290 mm table offers a stable work area for fixtures and small components while keeping the machine envelope efficient. For shops that process varied components, the ability to index the workpiece precisely translates into improved cycle consistency and measurable gains in throughput. The rotating mechanism is engineered for controlled movement, supporting accurate angular adjustments rather than coarse alignment. Secure clamping and reduced vibration for finer finishing Equipped with a T-slot 16 mm, this clamping table enables standard clamps and T‑nuts to be fitted quickly, turning fixture changes into an efficient, repeatable routine. The substantial mass—36 kg—acts as a vibration dampener, improving surface finish and dimensional stability during cutting or grinding operations. For applications where chatter and deflection compromise results, the combination of secure fixturing and inert mass helps maintain tool life and part quality. The engineered interface between table and fixture ensures that clamping forces are transferred consistently into the workholding system. Designed for straightforward shop integration and traceability The VP‑250S is classified under eClass 21020702, making specification and procurement straightforward within industrial catalogues. Its compact footprint and clear identification (SKU: VP‑250S, GTIN: 4061905085024) support efficient inventory handling and shop-floor organisation. Built by Vertex, the unit aligns with standard clamping practices so that existing clamps and tooling remain compatible. This predictability reduces the learning curve for operators and supports a reliable production flow for maintenance, small batch work and prototyping. For stable and accurate fixturing solutions from Vertex, contact Metav Werkzeuge to discuss the VP-250S clamping table and receive tailored application guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VP-250S GTIN: 4061905085024 eClass: 21020702 Manufacturer: Vertex Data Table surface: 180 x 290 mm Height: 206 mm Weight: 36 kg T-slot: 16 mm Special features Rotating base with swivel indexing Clamping table for fixture use Compact footprint for machine integration FAQ What are the dimensions of the table surface? The table surface measures 180 x 290 mm on the VP-250S clamping table. Does the unit allow angular adjustment? Yes. The VP-250S features a rotating base with a swivel mechanism for indexed angular positioning. Which T-slot size is available for fixturing? The clamping table is fitted with a T-slot 16 mm for standard T-nuts and clamps. What is the overall height and weight? Height is 206 mm and weight is 36 kg for the VP-250S. How can the product be identified for ordering? Identification: SKU VP-250S, GTIN 4061905085024, manufacturer Vertex Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan