Ausstattungen für Fräsmaschinen

Take advantage of the combination of high rotational speed and precision accuracy to maintain a steady production flow with minimal rework; the compact footprint and robust construction support stable processing of round bars. Order the VEC-300G directly via Metav Werkzeuge or ask our consultants if needed. Vertex VEC-300G Precision cutting and grinding machine — 3600 rpm, compact footprint The VEC-300G is a precision cutting and grinding machine for round bars, engineered for accurate end finishing and efficient throughput in small to medium production settings High-speed 3600 rpm for efficient machining Compact footprint 600x550x660 mm for tight spaces Accuracy 0.1 for repeatable results Robust 89 kg construction for reduced vibration Consistent throughput through engineered speed and control The unit combines a 3600 rpm spindle with a design focused on steady material feed to maximise throughput without compromising finish quality. High rotational speed reduces cycle times on short cuts, while the machine's mechanical stability maintains consistent results during repetitive operations. For manufacturers, this translates into predictable output and fewer interruptions, supporting lean workflows and improved capacity planning. Stable support and compact installation save workshop space With a compact footprint of 600x550x660 mm and a machine mass of 89 kg, the system occupies little floor area while offering a stable processing platform. The substantial weight dampens vibrations that commonly cause surface imperfections on turned or ground faces, so operators benefit from a cleaner finish and less time spent on rework. This configuration is particularly advantageous where floor space is limited but component quality must remain high. Accurate finishing and simple interpretation of results The machine delivers an accuracy 0.1, providing a reliable baseline for dimensional control when preparing round bars for assembly or secondary operations. Accuracy in this context means reproducible results across batches, reducing downstream inspection time and scrap. Technical terms such as accuracy and rotational speed are presented here to clarify how the machine influences part tolerance and surface quality for teams that may not be familiar with machining metrics. Practical design for production and workshop environments Designed specifically for round bars, the unit integrates functions for cutting and subsequent surface refinement in one compact station. This reduces handling between machines and shortens the overall process chain. The combination of precision capabilities and a small installation footprint supports both small workshops looking to upgrade capabilities and production lines needing a reliable periphery machine to maintain part conformity. Contact Metav Werkzeuge today to discuss how the Vertex VEC-300G's high-speed precision and compact design can be integrated into current production workflows and to arrange tailored advice from our consultants. Technical Data Article number: VEC-300G GTIN: 4061905084829 Manufacturer: Vertex Facts Dimensions: 600x550x660 mm Weight: 89 kg Speed: 3600 rpm Accuracy: 0.1 Special features Precision cutting and grinding for round bars Compact footprint suitable for benchtop or small shop installations Robust construction for reduced vibration and improved surface finish FAQ What materials can be processed with this machine? The VEC-300G is specified for cutting and grinding of round bars; material compatibility should be verified against tooling choices and operational parameters for each application. How does the machine's accuracy affect production quality? An accuracy rating of 0.1 supports consistent dimensional results, which reduces inspection time and the need for corrective machining on subsequent operations. Is the VEC-300G suitable for small workshops? Yes, the compact dimensions and integrated cutting-plus-grinding design make it well suited to shops with limited floor space that require precise finishing capability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of a 300 mm working diameter, tiltable orientation and 16 mm T-slots ensures stable, versatile positioning for demanding machining tasks; order the VUT-300 directly via Metav Werkzeuge or ask our consultants if needed. VUT-300 tiltable rotary table by Vertex — 300 mm diameter, horizontal/vertical The VUT-300 is a precision rotary table designed for tiltable setups in horizontal and vertical machining applications, offering a compact footprint and robust mass for accurate, repeatable operations. 300 mm precision rotary table Tiltable for horizontal and vertical use 16 mm T-slots for secure fixturing Robust 108 kg mass for stability Stable platform for high-accuracy work The substantial mass of the device, specified at 108 kg, creates a stable foundation that reduces vibration during cutting and improves surface finish consistency. A 300 mm working diameter provides a balance between a compact footprint and usable clamping area, allowing fixtures to be positioned close to the spindle for reduced overhang and better concentricity. Stability here translates directly into repeatable machining results and fewer set-up adjustments, which benefits production throughput and quality assurance. Flexible orientation to expand machining options The tiltable design enables both horizontal and vertical operation without the need for multiple dedicated fixtures, increasing workshop versatility. By permitting angular setups, the table simplifies tasks such as face milling, angular drilling and complex multi-axis clamping while keeping the workpiece in a fixed, controlled reference. This flexibility reduces cycle times by minimising repositioning and supports more efficient batching of diverse components in milling and drilling centres. Secure fixturing and straightforward integration Equipped with 16 mm T-slots, the unit accepts common clamping systems and modular fixturing, enabling secure attachment of vices, fixtures and custom adapters. The 65 mm central bore facilitates alignment and accommodates through-shaft clamping or auxiliary fixturing components where required. Clear, standardised interfaces make it straightforward to integrate the table into existing tooling sets, helping to preserve fixture investment while expanding capability. Compact dimensions with industrial-grade usability With a nominal footprint of 300 x 551 x 178 mm, the rotary table fits easily on many machine tables without sacrificing working area. The compact form, combined with the table’s mass and T-slot layout, supports precise indexing and stable operations even under moderate cutting loads. The design suits jobbing shops and production environments that require reliable, repeatable positioning without the footprint of larger rotary heads. Contact Metav Werkzeuge to discuss how the Vertex VUT-300 can be integrated into existing machining setups and to arrange supply from our Emmerich quality hub; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VUT-300 GTIN: 4061905093739 EClass: 36600610 Manufacturer: Vertex Numeric data Diameter: 300 mm Weight: 108 kg Dimensions: 300 x 551 x 178 mm Central bore: 65 mm T-slot width: 16 mm Features Type: Rundteiltisch (rotary table) Orientation: tiltable, horizontal/vertical T-slots: 16 mm for standard fixture systems SKU: VUT-300 FAQ What machining tasks is this table suited for? The Vertex VUT-300 rotary table is suited to milling, drilling and angular set-ups where repeatable indexing and stable clamping are required, particularly in small to medium-sized production runs. How are workpieces secured to the table? Workpieces are clamped using the 16 mm T-slots and the central 65 mm bore; standard clamps and modular fixture components are compatible with the table’s layout. What are the physical dimensions and mass of the unit? The rotary table has a working diameter of 300 mm, a nominal footprint of 300 x 551 x 178 mm and a mass of 108 kg, providing a stable base for machining operations. Can the table be used both horizontally and vertically? Yes, the unit is designed to be tiltable for both horizontal and vertical orientations, enabling flexible setup options without additional dedicated fixtures. Is the VUT-300 compatible with existing clamping systems? Yes, the T-slot configuration and central bore are compatible with common clamping systems, making integration with existing fixtures straightforward. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine the 300 mm tilting rotary table with its precise angle indexing and robust MT-4 taper to increase setup flexibility and machining accuracy; order the VUT-12 directly via Metav Werkzeuge or consult our specialists for application advice. VUT-12 tilting rotary table — 300 mm diameter, MT-4 mounting, Vertex The VUT-12 is a compact tilting rotary table for horizontal and vertical machining that provides precise angular indexing and secure fixture attachment for versatile production and toolroom use. *300 mm working diameter *Tilts for horizontal and vertical use *MT-4 taper for spindle mounting *T-slot 16 mm for secure clamping Precise angle control that reduces setup time The tilting rotary table is designed to deliver consistent precision for indexed operations. With a per-spindle-revolution feed of 1° tilt and 4° table rotation, the device enables predictable angular shifts when adjusting via the handwheel. The integrated scale offers fine indication — 2' for tilt and 10" for the table — allowing repeatable positioning during multi-axis setups. This level of control reduces trial runs and tool adjustments, which improves throughput and lowers scrap rates in batch production. Flexible fixturing and quick integration into machining centres A compact footprint and a 300 mm diameter table make this solution suitable for toolrooms and production cells alike. The MT-4 taper mount allows straightforward connection to common spindle or tailstock interfaces, while the T-slot 16 mm top provides secure clamping of fixtures, vices or bespoke workholding. Because the unit is operable in both horizontal and vertical orientations, the same device supports cross-drilling, angular milling and indexing tasks without repeated remounting, saving time and preserving datum alignment across operations. Robust design for reliable workshop performance Constructed for stable operation under regular workshop use, the rotary table weighs 108 kg, giving it a steady base for machining forces. The compact external dimensions 300 x 551 x 178 mm and a height of 319 mm allow integration into limited spaces while maintaining accessibility for tool changes and adjustments. The combination of solid mass and precise indexing contributes to predictable surface quality and repeatability over long production runs, supporting efficient workflows and dependable output. Discuss how the Vertex VUT-12 with its 300 mm tilting table and MT-4 mounting can streamline machining processes; contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VUT-12 GTIN: 4061905092879 ECLASS: 36600610 Manufacturer: Vertex Facts Diameter: 300 mm Dimensions: 300 x 551 x 178 mm Height: 319 mm Weight: 108 kg T-slot: 16 mm Special features Design: Horizontal / vertical, tilting rotary table Mounting: MT-4 taper Indexing per spindle revolution: 1° tilt / 4° table rotation Scale reading: 2' (tilt) and 10" (table) FAQ What degree of angular movement does the table provide per spindle revolution? Per spindle revolution the table advances 1° for tilt and 4° for table rotation, enabling controlled angular indexing with the VUT-12 tilting rotary table from Vertex. Which mounting interface is used for connection to spindles or tailstocks? The unit uses an MT-4 taper mounting, compatible with standard MT-4 fittings for straightforward attachment in the workshop. Can the table be used for both horizontal and vertical machining? Yes, the device is designed for horizontal and vertical orientations, allowing versatile operations such as angled milling, cross-drilling and indexing without re-fixturing. What clamping options are available on the table surface? The top plate is fitted with a T-slot 16 mm, permitting secure clamping of vices, fixtures and bespoke workholding solutions. Is the VUT-12 suitable for small toolroom and production environments? With a 300 mm diameter and compact dimensions, the VUT-12 is suited to both toolrooms and production cells where precise angular positioning and reliable workholding are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, robust protective solution that combines practical dimensions and low weight for efficient workshop use; the 2 mm shield thickness and rapid dispatch ensure minimal downtime—order directly via Metav Werkzeuge or consult the team for further technical clarification. VH-56 Eye Protection Shield — compact 300 x 180 x 2 mm protective panel by Vertex VH-56 is a compact eye protection shield designed for clear, reliable coverage in workshop and laboratory settings; its size and construction prioritise space-saving protection where visibility and manoeuvrability matter Compact 300 x 180 mm form factor 2 mm thickness for reliable barrier function Lightweight at 1 kg for easy handling Reliable protection with measurable dimensions The VH-56 presents a straightforward, measurable solution for localised eye protection: the 300 x 180 x 2 mm format provides defined coverage while keeping the unit lightweight for handheld or mounted applications. The specified 2 mm thickness gives a balance between rigidity and manageable bulk; in practice this means a durable barrier that does not overly restrict movement. Emphasis on exact dimensions supports planning for integration into workstations or personal protective equipment layouts. Practical benefits for daily workshop use Compact dimensions and modest mass translate into practical advantages in production and maintenance contexts. The shield’s format reduces storage footprint and simplifies handling during multiple shifts, supporting faster changeovers and reduced handling time. The visible, standardised sizing aids inventory management and ordering processes, while the lightweight construction facilitates temporary repositioning or stowage without special tools. These attributes deliver tangible efficiency gains in routine operations. Ease of specification and logistics From a procurement standpoint, clear identifiers such as the GTIN and SKU simplify stock management and traceability. The item’s compact footprint and predictable weight assist transport planning and on-site allocation. Rapid dispatch noted in the product listing reduces lead times, helping to avoid production delays. This practical logistics profile, combined with standardised data, supports cost-effective purchasing decisions and dependable workshop supply chains. For ready procurement or tailored advice on integrating this Vertex eye protection shield into existing PPE arrangements, contact Metav Werkzeuge for expert guidance and fast dispatch from Emmerich. Technical data Article number: VH-56 GTIN: 4061905083419 EClass: 40011590 Title: Vertex Augenschutzschild einfach sofort beziehen Facts Dimensions: 300 x 180 x 2 mm Weight: 1 kg Special features Brand: Vertex SKU: VH-56 Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/bc/2f/97/63/63972fbcc806fb82109e35de/VH-56-main.png FAQ What are the exact dimensions and weight of the shield? The shield measures 300 x 180 x 2 mm and has a weight of 1 kg, providing a compact, lightweight protective panel suitable for close-range tasks. Is the VH-56 suitable for use in tight workspaces? Yes, the compact format of the VH-56 eye protection shield is intended for situations where a reduced footprint and easy manoeuvrability are required. What information is available for procurement and stock management? The product is listed with GTIN 4061905083419 and article number VH-56 to support straightforward ordering and inventory control. Is the base material specified for this protection shield? Material details are not provided in the available data; consult the product datasheet or Metav Werkzeuge for material specifications and compatibility information. How does the shield help reduce operational downtime? The standardised size and lightweight construction enable quick handling and replacement, while rapid dispatch from stock reduces lead time for replenishment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a transparent protective panel with a magnetic 80 kg base and compact dimensions to maintain clear sightlines at inspection stations while keeping adjustments quick and secure. Order the VH-57 directly via Metav Werkzeuge or consult our specialists for application advice. VH-57 Eye Protection Shield — transparent panel with 80 kg magnetic base by Vertex The VH-57 eye protection shield is a compact, magnetic-mounted safety barrier designed for machine guards and inspection workstations in industrial workshops. Transparent 300 x 180 x 2 mm panel Magnetic base, 80 kg holding force Compact 60 x 50 x 55 mm footprint Robust 1.6 kg overall weight Clear visibility for continuous inspection and safe handling The transparent panel delivers unobstructed visual access to processes, enabling uninterrupted monitoring at inspection benches and machine frontages. With dimensions of 300 x 180 x 2 mm, the screen preserves sightlines while acting as a physical barrier; this supports faster quality checks and reduces downtime associated with temporary shielding. The relatively lightweight 1.6 kg construction allows easy repositioning without sacrificing stability, so supervision and measurement tasks remain efficient and ergonomic. Fast, secure attachment with a high-hold magnetic base A magnetic base rated at 80 kg provides secure fixation to ferrous surfaces, enabling rapid mounting and removal where temporary or mobile protection is required. The base's compact footprint of 60 x 50 x 55 mm minimises obstruction at the workstation and is designed for stable contact on flat metal surfaces. This mounting method removes the need for permanent fixtures, supporting flexible workstation layouts and quick adaptation to changing production steps. Versatile use across inspection, assembly and machine guarding The compact shield is suited to a range of workshop tasks, from visual inspection and bench testing to acting as a localized safety barrier in assembly zones. The clear panel supports compliant inspection routines by keeping the operator able to visually assess components while maintaining a protective separation. Its compact dimensions and portable weight make the unit a practical option for toolrooms, quality-control stations and small-batch production environments that require frequent rearrangement of protective equipment. Contact Metav Werkzeuge for tailored advice on integrating the VH-57 magnetic eye protection shield into your workflow; supply and consultation are handled directly from Emmerich for reliable delivery and expert support Technical Data SKU: VH-57 GTIN: 4061905089763 Manufacturer: Vertex Core specifications Dimensions: 300 x 180 x 2 mm Weight: 1.6 kg Magnetic holding force: 80 kg Special features and materials Transparent panel Magnetic base 60 x 50 x 55 mm Suitable for machine guarding and inspection stations FAQ How is the VH-57 mounted and removed? The VH-57 uses a magnetic base with an 80 kg holding force for rapid attachment to ferrous surfaces and straightforward removal when relocation is required. Can the transparent panel be used on inspection benches and machine fronts? Yes, the transparent panel is designed for inspection stations and machine guarding where visual access to processes must be preserved while providing a physical barrier. What are the exact dimensions and weight of the protective shield? The protective screen measures 300 x 180 x 2 mm and has an overall weight of 1.6 kg, making it compact and portable for workshop use. Is the magnetic base suitable for uneven surfaces? The magnetic base is optimised for flat ferrous contact surfaces; secure holding is achieved on appropriately prepared metal surfaces with full base contact. Who manufactures the VH-57 and where is it produced? The VH-57 is produced by Vertex and supplied through Metav Werkzeuge; full manufacturer details are provided below. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from robust right-angle fixturing with high-strength cast steel and 0.01 mm repeatability for consistent production results. Order the VR-12 angle plate directly via Metav Werkzeuge or ask our consultants if needed. VR-12 angle plate by Vertex — high-strength cast steel, 0.01 mm accuracy A VR-12 angle plate engineered for secure right-angle workpiece clamping and repeatable fixturing in machining and inspection environments Heavy-duty cast steel construction Precision alignment to 0.01 mm Compact footprint 300 x 202 x 228 mm Solid 23.7 kg mass for vibration damping Stable fixturing for improved surface quality Made from high-strength cast steel, this workholding plate combines mass and rigidity to reduce micro-movements during machining. The substantial 23.7 kg body increases vibration damping, which in turn helps maintain cutting-edge engagement and leads to fewer surface imperfections and longer tool life. With the compact footprint of 300 x 202 x 228 mm, the unit integrates on machining and measuring tables while preserving access to the workpiece. The result is a tangible increase in process reliability and a more consistent production flow. Repeatable alignment that supports serial production The defined 0.01 mm accuracy rating ensures repeatable right-angle alignment when setting up fixtures or inspection jigs. In practice, this level of precision translates into predictable tolerances across batches, reducing the need for time-consuming rework and enabling tighter process control. The stated accuracy reflects the measured behaviour of the component under standard workshop conditions; for customers less familiar with metrology terms, this means the plate holds positional references very precisely, allowing downstream operations to run with higher predictability and lower scrap rates. Practical integration into workshop workflows Designed as a stable reference for clamping, the angle plate is suitable for a wide range of fixturing tasks where a reliable 90° datum is needed. The combination of robust material and weight provides a steady base for measurement or machining set-ups, simplifying alignment procedures and reducing downtime for adjustments. For operations requiring additional technical data or specific mounting advice, Metav Werkzeuge can supply application-oriented guidance to ensure the plate meets the intended process requirements while fitting established workshop routines. Contact Metav Werkzeuge in Emmerich for specification advice or to arrange procurement of the VR-12 angle plate Technical data Article number: VR-12 GTIN: 4061905092008 Manufacturer: Vertex Facts Dimensions: 300 x 202 x 228 mm Accuracy: 0.01 mm Weight: 23.7 kg eClass: 21020601 Materials & suitability Material: high-strength cast steel Function: angle plate for right-angle workpiece fixturing and measurement FAQ What level of precision can be expected from this angle plate? The VR-12 angle plate from Vertex offers a declared accuracy of 0.01 mm, providing a reliable datum for machining and inspection tasks where tight repeatability is required. Is the VR-12 suitable for heavy-duty machining setups? Yes, the VR-12’s high-strength cast steel construction and 23.7 kg mass support stable clamping and contribute to vibration damping in demanding workshop environments. What are the physical dimensions and how do they affect use? The unit measures 300 x 202 x 228 mm, a compact footprint that balances a stable reference surface with manageable handling and integration on machine or inspection tables. Who manufactures the angle plate and where is it produced? The angle plate is manufactured by Vertex; the VR-12 is part of Vertex’s range of workholding solutions designed for precision in industrial applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact and reliable: the combination of a 300 x 300 mm table and 15° indexing provides precise, repeatable angular positioning for machining and assembly tasks. Order the precision indexing table directly via Metav Werkzeuge or ask the consultants for tailored advice. VIT-300-15 Precision Indexing Table — 300 x 300 mm tabletop, 15° indexing — Vertex A VIT-300-15 is a precision indexing table designed for repeatable angular positioning in workshop and production environments. 300 x 300 mm rigid table surface 15° indexing for quick repositioning Rotates clockwise and counter-clockwise 14 mm T-slots for secure clamping Precision that keeps production on schedule The unit delivers consistent angular steps thanks to its 15° indexing, enabling fast, repeatable set-ups that reduce non-productive time. With an emphasis on measurable accuracy (listed as accuracy class 3), the rotary solution supports processes where positional certainty is essential. The generous 300 x 300 mm working surface simplifies fixture placement and, when combined with the indexing mechanism, decreases cycle variability—resulting in improved throughput and predictable component quality. Robust workholding for reliable processes Built for stability, the table’s substantial mass (94 kg) and integrated 14 mm T-slots provide a secure platform for clamping standard tooling and workpieces. The design allows rotation clockwise and counter-clockwise, which supports flexible machining sequences and eases toolpath planning in both manual and automated workflows. These mechanical properties translate into fewer re-clamps, reduced vibration during operation and a lower risk of setup-related rejects, so production runs remain consistent. Integration and set-up made straightforward The indexing table is engineered for straightforward integration into existing benches and machines, providing repeatable angular positioning without complex adjustments. Explanation: indexing means the table stops at defined angular increments (here 15°), so cuts, drilling or measuring steps can be executed with minimal alignment effort. The compact footprint and standard clamping interfaces support quick installation and compatibility with common workshop fixtures, helping to maintain a steady production flow with minimal training required. Contact Metav Werkzeuge for tailored technical advice and order handling; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: VIT-300-15 GTIN: 4061905084492 Eclass: 36600310 Manufacturer: Vertex Facts Table dimensions: 300 x 300 mm Height: 160 mm Indexing step: 15° T-slot width: 14 mm Weight: 94 kg Accuracy class: 3 Special features Rotates clockwise and counter-clockwise Precision indexing for repeatable angular positioning Rigid table surface for stable clamping Suitable for workshop and production environments FAQ What indexing increment does the table provide? The VIT-300-15 provides a 15° indexing increment for defined angular steps, suitable for rapid repositioning during machining and assembly. Can the table rotate in both directions? Yes, the Vertex precision indexing table rotates clockwise and counter-clockwise, enabling flexible operation sequences and easier alignment. What are the tabletop dimensions and clamping options? The tabletop measures 300 x 300 mm and includes 14 mm T-slots for secure attachment of fixtures and standard clamps. How heavy is the unit and what stability does that give? At 94 kg, the device offers a stable base that reduces vibration and improves repeatability, supporting reliable machining cycles. Is the table suitable for both manual and CNC-assisted setups? The precision index table from Vertex is designed for workshop and production use, integrating easily with manual benches and automated systems where repeatable angular positioning is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a space-saving, stackable design and the clearly defined 300×450×177 mm footprint to streamline parts handling; the set of 8 organisers reduces search times and simplifies inventory. Order the storage boxes directly via Metav Werkzeuge or ask the consultants if specification advice is needed. Storage boxes for small parts VHB-3045 — Set of 8, 300×450×177 mm (Vertex) The Storage boxes for small parts are a compact set designed for organised storage and clear identification of fasteners and small components in workshops and parts stores. Set of 8 stackable storage boxes Space-saving 300×450×177 mm format Lightweight total weight 1.88 kg Easy inventory with GTIN 4061905089886 Faster picking and tidier workspaces with a compact footprint The stackable organiser set provides a consistent, measurable footprint that optimises bench and shelf usage. With the 300×450×177 mm format, racking and workbench layouts can be planned precisely, reducing wasted space and enabling faster picking cycles. The uniform size supports systematic row-and-column storage, which contributes to shorter retrieval times and fewer misplaced items. A set format tuned to small-part logistics and traceability Delivered as a set of 8, the organisers simplify batch handling and replenishment: sets can be allocated per job, per machine or per shelf location to speed up resupply. The presence of a clear GTIN allows seamless integration into barcode-based inventory systems and supports consistent stock control, aiding purchasing and reducing downtime caused by missing parts. Practical benefits for workshop routines and maintenance tasks The modular design supports stacked storage and straightforward access during assembly or maintenance work, helping to reduce handling steps and task interruptions. Clear grouping of fasteners and small items lowers the risk of cross-contamination between batches and improves process reliability, which is particularly valuable in scheduled maintenance or high-mix production environments. Simple specification and integration into existing systems Specification is straightforward thanks to the fixed dimensions and set composition, enabling planners to calculate storage density and shelf allocation without guesswork. The compact, standardised format makes the organisers compatible with common storage systems and allows easy labelling and documentation within existing material management practices. Contact Metav Werkzeuge in Emmerich for order placement or technical advice — email info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271 Technical Data Article number: VHB-3045 GTIN: 4061905089886 Manufacturer: Vertex Measurements Dimensions: 300×450×177 mm Weight: 1.8825 kg Pieces per set: 8 Features Stackable design Set format ECLASS: 21100422 FAQ What materials are the storage boxes made from? The answer is not specified in the provided data for the Storage boxes for small parts VHB-3045 (Vertex); material information is not available. Can the organisers be stacked on standard shelves? Yes. The set of 8 units and the standardised dimensions of the Storage boxes for small parts VHB-3045 permit stable stacking and planned shelf allocation. How does the GTIN help with inventory control? The GTIN 4061905089886 enables barcode scanning and automated entry of the VHB-3045 SKU into inventory systems for faster stock checks and ordering. Is the set suitable for workshop and on-machine storage? The compact footprint and stackable format make these organisers suitable for workshop benches and localised on-machine parts storage for small components. How many boxes are included in one delivery unit? One delivery unit comprises a set of 8 boxes as indicated for the VHB-3045 organiser set. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, swivel-capable workholding solution that combines FC25 cast iron durability with a 300×600 mm table for reliable setup and machining of small fixtures; order the VP-600 directly via Metav Werkzeuge or consult our specialists if further advice is required. VP-600 Tilting clamping table by Vertex — 300×600 mm table, 45° swivel VP-600 is a robust tilting clamping table designed for precise fixturing and angled machining tasks in small-scale production and toolrooms. Cast iron FC25 body for long-term stability Swivels 45° for angled machining Table 300×600 mm for versatile clamping Max load 25 kg, height 202 mm for compact integration Stable groundwork for repeatable setups The solid FC25 construction provides a stable base that reduces vibration during machining, ensuring repeatable results across batches. With a machine mass of 85 kg, the unit benefits from natural damping that improves surface finish and measurement consistency. The material choice combines stiffness with corrosion resistance typical for workshop castings, so fixtures remain aligned over time. This stability translates directly into lower scrap rates and fewer setup iterations for production and toolroom environments. Flexible clamping for angled and multi-face work A 45° swivel function expands the range of accessible machining angles without the need for complex re-fixturing, enabling quicker transitions between operations. The 300×600 mm work surface offers ample room for modular clamps and bespoke jigs while keeping the footprint suitable for bench or machine-table installation. The specified 25 kg maximum load indicates suitability for small to medium fixtures and components; the table geometry supports precise positioning while maintaining clearances for cutting tools and probes. Easy integration and dependable service life At a height of 202 mm, the unit integrates cleanly with standard machine tables and measuring setups, simplifying alignment and reference-height calculations. Surfaces and mounting points are dimensioned for typical clamping systems, allowing compatibility with common tooling. The durable cast-iron design minimises maintenance intervals and supports long-term workshop availability, reducing downtime and supporting continuous operation. Supplied as a compact, ready-to-mount clamping table, the solution is well suited to both retrofit and new-machine applications. Contact Metav Werkzeuge in Emmerich to specify the Vertex VP-600 tilting clamping table for workshop use or to request detailed integration advice from our consultants Technical data SKU: VP-600 GTIN: 4061905094552 Manufacturer: Vertex Facts Weight: 85 kg Max load: 25 kg Table size: 300×600 mm Height: 202 mm Special features Material: FC25 (cast iron) Swivel range: 45° Product type: Tilting clamping table (workholding) FAQ What is the maximum load capacity of the VP-600? The VP-600 has a rated maximum load capacity of 25 kg, suitable for small fixtures and components typically used in toolrooms and small-batch production. Which material is the clamping table made from and why does it matter? The table is manufactured from FC25 cast iron, chosen for its rigidity and vibration-damping properties, which support repeatable machining and improved surface finishes. Can the VP-600 be used for angled machining operations? Yes, the integrated 45° swivel enables angled setups without complex re-fixturing, allowing faster changeovers and greater flexibility for multi-face work. What are the table dimensions and how do they affect fixture choice? The working surface measures 300×600 mm, providing space for modular clamps and bespoke jigs while remaining compact enough for bench or machine-table installation. Who manufactures the VP-600 and where can more information be obtained? The VP-600 is produced by Vertex; further technical details and ordering assistance are available via Metav Werkzeuge. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a secure combination of 0–305 mm opening and 1,500 kgf clamping force for stable, efficient milling. The large opening reduces repositioning, while the precise 0.02 mm repeatability supports consistent finishing. Order the VJ-600 directly via Metav Werkzeuge or ask our consultants if needed. VJ-600 Milling Vice by Vertex — extra‑large 0–305 mm opening, 1,500 kgf clamping force A VJ-600 milling vice engineered for heavy-duty workholding, offering wide-piece capacity and reliable mechanical clamping for workshop and machining-centre use. Extra-large 0–305 mm opening 1,500 kgf clamping force 0.02 mm positioning accuracy Robust 46 kg mechanical design Hold larger components with fewer setups for higher throughput The wide 0–305 mm opening allows secure clamping of larger or irregular workpieces, reducing the need for frequent re‑clamping and saving set‑up time. With a rated 1,500 kgf clamping force, the vice provides a high holding capacity that minimises vibration and workpiece movement during heavy cuts. The combination of width and force therefore translates directly into improved machining stability and fewer interruptions in production. Achieve reproducible results with fine positioning control A stated 0.02 mm accuracy denotes the vice’s capability for precise jaw positioning and repeatability. In practical terms, this level of precision helps to reduce finishing passes and rework by keeping the part datum consistent across multiple clamping operations. For users less familiar with technical tolerances: repeatability indicates how closely the vice returns to the same position after opening and reclamping, which is crucial for batch machining and toolpath reliability. Durable mechanical design for reliable daily use Constructed as a mechanical vice and weighing 46 kg, the unit combines mass and rigid construction to absorb cutting forces and deliver long service life without complex maintenance procedures. The heavy‑duty build supports workshop workflows where robustness is paramount, while the simple mechanical operation ensures predictable behaviour across shifts. Fewer moving parts mean easier inspection and lower likelihood of unexpected downtime. Integration and practical advantages on the shop floor The VJ-600 is engineered for straightforward mounting and operation in typical milling setups; its dimensions (546×290×175 mm) make the vice compact enough for many machine tables while still offering a substantial opening range. The vice’s precision characteristics help shorten quality-control loops, allowing operators to achieve target tolerances more quickly. Clear technical data such as SKU and GTIN support traceability in purchasing and inventory systems. Contact Metav Werkzeuge in Emmerich for tailored advice and to arrange supply of the VJ-600 milling vice with its wide opening and high clamping force. Technical data Article number: VJ-600 GTIN: 4061905086991 ECLASS: 21020601 ETIM: EC002173 Type: Mechanical Facts Dimensions: 546×290×175 mm Opening range: 0–305 mm Clamping force: 1,500 kgf Accuracy (repeatability): 0.02 mm Weight: 46 kg Special features Extra-large opening for big workpieces High clamping force for heavy cutting Robust mechanical construction Suitable for workshop and machining-centre use FAQ What is the maximum opening of the vice? The vice offers an opening range of 0–305 mm, allowing clamping of larger components without special fixtures. How strong is the clamping force? The VJ-600 provides a clamping force of 1,500 kgf, giving stable holding for demanding milling operations. What level of repeatability can be expected? Repeatability is specified at 0.02 mm, which supports consistent repositioning and reduces the need for corrective finishing. Is the vice suitable for heavy cutting? Yes. The combination of 1,500 kgf clamping force and a 46 kg robust construction makes the vice appropriate for substantial cutting forces. Which machine environments suit this vice? The vice is designed for standard milling and machining‑centre setups where a wide opening and strong, repeatable clamping are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise indexing, a compact 305 mm work surface and robust load ratings for reliable multi‑axis machining. Order the Vertex rotary table directly via Metav Werkzeuge or consult our specialists for compatibility advice. Rundteiltisch HV-12 — Rotary table for horizontal and vertical machining, 305 mm The Rundteiltisch is a compact rotary table designed for precision horizontal and vertical setups on milling machines and machining centres, combining a moderate footprint with high repeatability for toolpaths and indexing operations. 305 mm table diameter MT-4 spindle taper Load 120 kg horizontal / 60 kg vertical T-slots 6 × 16 mm 4° per spindle revolution, 10 arcsec readout High‑precision indexing for tighter tolerances The HV-12 delivers controlled angular positioning through a fine 4° per spindle revolution and a reading resolution of 10 arcseconds, which together reduce cumulative positioning error during repetitive operations. Such mechanical indexing accuracy benefits applications where consistent hole patterns, gear cutting preparations or multi‑facet machining are required. The MT-4 spindle taper offers a standard interface for drive and locking systems, ensuring robust torque transmission and predictable repeatability without additional adapters. Versatile orientation and stable load capacity A dual‑orientation design allows the table to be mounted for both horizontal and vertical machining, broadening its use across setup types while saving fixture changes. The rated capacity of 120 kg horizontally and 60 kg vertically supports medium‑sized workpieces and fixtures, allowing secure clamping for milling, drilling and light rotary operations. The 305 mm work surface provides a practical balance between usable area and machine table clearance, enabling integration on common vertical and horizontal mills without excessive overhang. Secure fixturing and compact integration Built with T-slots (6 × 16 mm) across the face, the table simplifies fixturing: standard clamps and cross‑slots can be used to locate vises, angle plates or bespoke fixtures quickly. The compact overall dimensions (388 × 330 × 123 mm) and a height of 125 mm make the unit straightforward to position on a machining table, while the 58.7 kg mass contributes to vibration damping in normal cutting conditions. Together, these attributes reduce setup time and increase process stability, which supports more consistent cycle times and part quality on the shop floor. Discuss Vertex HV-12 specifications with Metav Werkzeuge in Emmerich for tailored mounting advice and prompt delivery from our European warehouse Technical data SKU: HV-12 GTIN: 4061905089183 ECLASS: 36600610 Manufacturer: Vertex Core specifications Table diameter: 305 mm Dimensions (L×W×H): 388 × 330 × 123 mm Height: 125 mm Weight: 58.7 kg Max load horizontal: 120 kg Max load vertical: 60 kg Rotation per spindle turn: 4° Reading resolution: 10 arcseconds Special features Spindle taper: MT-4 Configuration: Horizontal / Vertical T-slots: 6 × 16 mm Brand: Vertex FAQ What degree of indexing precision can be expected from this rotary table? The Vertex HV-12 rotary table provides indexing with a 4° advance per spindle revolution and a readout resolution of 10 arcseconds, delivering the fine angular control required for precise patterning and multi‑axis setups. Is the table suitable for vertical mounting on a milling machine? Yes, the HV-12 is designed for horizontal and vertical use; the specification lists a maximum vertical load of 60 kg, so ensure the workpiece and fixturing remain within that limit. Which spindle interface is used to drive the table? Driving and locking are via an MT-4 spindle taper, a common standard that allows secure coupling to a variety of drive arrangements and ensures stable torque transmission. How does the table face support common fixtures and vises? The face includes T-slots (6 × 16 mm) for conventional clamping hardware; this enables fast mounting of vises, plates and custom fixtures without special adapters. What are the physical dimensions and weight for machine compatibility checks? The unit measures 388 × 330 × 123 mm with a height of 125 mm and weighs 58.7 kg, values that assist in verifying clearance and load capacity on the host machine. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of compact benchtop dimensions, secure 16 mm T-slot fixturing, and a 20 Kg load capacity for consistent, repeatable setups; order the unit directly via Metav Werkzeuge or contact our consultants for specification support. VCT-512 Cross Table by Vertex — 310 x 141 mm table, 16 mm T-slot The VCT-512 is a compact cross table designed for precision positioning and fixturing in small machine-shop and inspection applications, offering a stable platform for light milling, drilling and measurement tasks. Precision table 310 x 141 mm 16 mm T-slot for versatile fixturing Max load 20 Kg for stable machining Consistent positioning for accurate results The cross slide delivers repeatable travel across both axes, based on a machined table area of 310 x 141 mm that supports precise workpiece alignment. The solid construction and a listed weight of 16.5 kg reduce vibration during cutting and measuring, which improves surface finish and measurement reliability. For workshops seeking predictable throughput, the combination of compact size and mass reduces the need for frequent rework and simplifies set-up times. Secure clamping reduces rework and downtime Integrated 16 mm T-slot configuration enables flexible clamping with standard fixtures and clamps, allowing modular setups without custom adaptors. A rated maximum load of 20 Kg means the table handles typical small-part machining and inspection duties while maintaining positional integrity. Explaining the term: a T-slot is a standard channel for bolt-head engagement, making fixture changes quick and mechanically secure, which cuts fixture-change time and lowers risk of clamping errors. Compact footprint for easy integration on the bench With a base footprint of 225 x 200 mm and an overall height of 115 mm, the table fits onto crowded benches and machine tables while providing sufficient travel surface. The compact form factor supports flexible placement beside mills, drill presses or measuring rigs without significant reorganisation of the workstation. The result is a practical compromise between stability and space efficiency that benefits small shops and labs where bench real estate is at a premium. Request a specification check from Metav Werkzeuge to confirm mounting, clamping options and to reserve the Vertex VCT-512 for the next production run Technical Data Article number: VCT-512 GTIN: 4061905083198 Manufacturer: Vertex Facts Table size: 310 x 141 mm Base (foot) dimensions: 225 x 200 mm Height: 115 mm Maximum load: 20 Kg Weight: 16.5 kg T-slot width: 16 mm Special features Type: Cross table Suitable for light milling, drilling and inspection fixtures Compact benchtop design FAQ What are the exact table dimensions? The table surface measures 310 x 141 mm, which on the VCT-512 provides a versatile working area for small parts. What is the load capacity for clamping operations? The Vertex VCT-512 is rated for a maximum load of 20 Kg, suitable for typical small-workpiece machining and inspection tasks. Which T-slot size is provided for fixturing? A 16 mm T-slot is fitted to the cross table for standard clamp and fixture compatibility. How much space does the unit occupy on the bench? The base dimensions are 225 x 200 mm with an overall height of 115 mm, allowing easy placement on crowded workbenches. Is the table heavy enough to reduce vibration during cutting? With a weight of 16.5 kg, the cross table offers sufficient mass to dampen minor vibrations for improved finish and measurement stability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise indexing, a compact 315 mm working diameter and the included 3-jaw chuck for efficient setup and repeatable machining results. Order the CC-12A round dividing table directly via Metav Werkzeuge or ask our consultants for tailored application advice. CC-12A round dividing table — 315 mm diameter, 3-jaw chuck included The CC-12A round dividing table provides compact rotary indexing for precision machining and workshop fixturing in small to medium production runs. 315 mm working diameter Robust construction for workshop use Includes 3-jaw chuck and dividing plates Heavy-duty 163 kg base Accurate indexing that reduces setup time A compact rotary table streamlines repetitive machining tasks by offering reliable precision for indexing operations. The integrated indexing system works with standard dividing plates to deliver repeatable angular positions, which reduces the number of individual setups and the risk of alignment errors. With a 315 mm working diameter, the unit accommodates a wide range of workpieces while keeping the footprint small, so production flow becomes more efficient without sacrificing control. Built to stay steady under load A substantial mass contributes to vibration damping and stability during cutting and finishing, improving surface quality and tool life. The table’s solid build and 163 kg mass provide a steady platform for clamping and machining operations, while the compact overall dimensions 432 x 293 x 388 mm make integration into existing benches or milling fixtures straightforward. The result is fewer reworks and a more predictable machining process for standard workshop applications. Accessories included to simplify operation Delivered as a complete set, the table includes a 3-jaw chuck and a series of dividing plates (2, 3, 4, 6, 8, 12) that expand the range of available indexing ratios without additional purchases. These accessories enable quick vice-less clamping of round and irregular parts and allow common divisional patterns to be produced directly at the table. The ready-to-fit configuration shortens commissioning time and keeps the focus on producing accurate parts rather than sourcing adaptors. Contact Metav Werkzeuge today to discuss the CC-12A and how its precision indexing and included chuck can be specified for specific applications — email info@metav-werkzeuge.com for technical matching and delivery from Emmerich. Technical data Article number: CC-12A GTIN: 4061905088902 Manufacturer: Vertex Facts Weight: 163 kg Working diameter: 315 mm Mounting/adaptor size: 105 mm External dimensions: 432 x 293 x 388 mm Special features Includes 1x 3-jaw chuck Dividing plates: 2, 3, 4, 6, 8, 12 Delivered as a set FAQ What is the effective working diameter of the rotary table? The effective working diameter is 315 mm, which suits a wide range of workshop parts for the CC-12A round dividing table from Vertex. Which accessories are supplied with the table? The delivery includes one 3-jaw chuck and dividing plates for 2, 3, 4, 6, 8 and 12 divisions to simplify clamping and indexing tasks. Is the table suitable for continuous production use? With a heavy-duty 163 kg construction and compact external dimensions, the CC-12A is designed for stable, repeatable operation in regular workshop and small-series production. What does the 105 mm mounting specification refer to? The 105 mm value indicates the mounting/adaptor interface dimension used for fitting chucks and tooling to the CC-12A. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust 315 mm rotary table with a 105 mm mounting bore and included 3-jaw chuck delivers stable indexing and reliable repeatability; ideal where heavy construction and precise positioning are required. Order the CC-12 directly via Metav Werkzeuge or consult our specialists for application advice. CC-12 Rotary Table – 315 mm diameter, 3-jaw chuck (Vertex) A CC-12 simple rotary table for precision workpiece indexing and secure clamping on milling machines and workshop spindles. 315 mm working diameter 105 mm mounting bore Supplied with 3-jaw chuck Heavy-duty 163 kg construction Stable platform for accurate indexing and reduced vibration The heavy cast design provides a stable platform that reduces vibration during cutting, improving surface finish and tool life. With a working diameter of 315 mm and a 105 mm mounting bore the table offers generous contact area for a wide range of components; the mass of 163 kg increases rigidity and contributes directly to consistent, repeatable results. This low-vibration behaviour benefits both conventional and CNC-assisted milling operations by allowing higher feed stability and more predictable machining outcomes. Integrated workholding for faster setup and flexible clamping Supplied as a compact set, the table includes a 3-jaw chuck and a selection of cover plates (2, 3, 4, 6, 8, 12), enabling rapid clamping of round and irregular workpieces. The included accessories reduce the need for additional fixtures and cut setup time between jobs. For operators less familiar with specialised fixtures, the combination of chuck and backplates simplifies part mounting: concentric clamping from the chuck pairs with the cover plates for stepped or profiled components, yielding secure hold and improved concentricity without complex bespoke tooling. Simple design that supports workshop productivity and precision A straightforward, single-stage rotary table architecture keeps maintenance predictable and spares management simple. The uncomplicated mechanism facilitates routine checks and prolongs service intervals, which is particularly valuable in small-batch production where uptime is critical. Built for durability rather than superfluous functions, the unit prioritises precision and repeatability, translating to fewer reworks and steadier output quality over the life of the equipment. Practical choice for suppliers and long-term operation Choosing this Vertex rotary table means selecting a proven manufacturer and a component that integrates readily into standard machine-tool environments. The compact footprint (432 x 293 x 388 mm) and the supplied workholding make the unit practical for constrained benches while still delivering industrial-grade stability. Metav Werkzeuge positions such products for workshops that require accessible, high-accuracy solutions without compromising on build quality—a pragmatic balance between investment and dependable performance. Contact Metav Werkzeuge for targeted application support and to reserve the CC-12 rotary table from our European stock in Emmerich Technical data SKU: CC-12 GTIN: 4061905089374 ECLASS: 36600610 Facts Diameter: 315 mm Mounting bore: 105 mm Weight: 163 kg Dimensions: 432 x 293 x 388 mm Special features Simple rotary table design Includes 3-jaw chuck; cover plates 2,3,4,6,8,12 Manufacturer: Vertex FAQ What workholding is included with the rotary table? The CC-12 rotary table is supplied with a 3-jaw chuck and cover plates for 2, 3, 4, 6, 8 and 12 positions, providing versatile clamping options. Which machines is this table compatible with? The CC-12 is designed for integration with milling machines and workshop spindles that accept a 105 mm mounting bore and similar mounting interfaces. How does the table improve machining accuracy? The heavy construction and 315 mm working diameter of the CC-12 increase rigidity and reduce vibration, improving concentricity and repeatability during cutting operations. Is the CC-12 suitable for serial production or small batches? The simple, robust design of the CC-12 makes it well suited to small-batch production where quick setups and consistent precision are required. Who manufactures the product and where is it sourced? The rotary table is manufactured by Vertex and supplied via Metav Werkzeuge, which stocks precision tools for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

High clamping accuracy from the self-centring mechanism, a reversible 3-jaw layout and a robust 41 kg construction provide secure, repeatable workholding for demanding turning tasks. Benefit from reduced setup times and consistent machining results — order the VSK-12A chuck directly via Metav Werkzeuge or consult the advisors for application guidance. VSK-12A – 3-jaw reversible, self-centring lathe chuck (Ø 315 mm) by Vertex The VSK-12A is a reversible, self-centring 3-jaw chuck designed for reliable clamping on lathes and machining centres where fast, repeatable workholding is required. Reversible 3-jaw design for internal/external clamping Self-centring action for repeatable concentricity Heavy-duty construction, 41 kg for stable machining Mounting interface with 3xM16 thread Faster set-ups and consistent machining quality The combination of a self-centring mechanism and a 3-jaw chuck geometry delivers fast alignment of round and hexagonal stock, reducing the time spent on manual adjustments. For production runs this means fewer interruptions and more consistent part tolerances; the reversible jaw arrangement also allows quick switching between external gripping and internal gripping without changing chucks. The result is measurable process efficiency and improved shop-floor throughput, especially where repeated batches and turnover are frequent. The robust design contributes to stable cuts, minimising vibration and improving surface finish. Flexible clamping options and clear mounting data A reversible configuration permits both internal and external workpiece gripping, increasing the range of components that can be processed with a single workholding device. Mechanical mounting is provided via a 3xM16 thread pattern; the chuck presents a diameter of Ø 315 mm and a height of 156.5 mm, making it suitable for installations that accept this interface. The substantial mass of 41 kg helps the chuck resist deflection under load, improving repeatability during heavy-duty turning. For integration, note the mounting thread and overall envelope to ensure compatibility with the lathe spindle and any adapting plates. Practical handling, inspection and application notes Due to its weight and construction, safe handling procedures should be observed when fitting the chuck to the spindle; lifting aids or team lifting are advisable. The reversible jaw system simplifies changeover between gripping modes, but correct jaw seating and secure bolting via the spindle interface are essential for safe operation and concentric clamping. The VSK-12A supports production environments where short set-up times, robust clamping and reliable repeatability are priorities; when matched with appropriate tooling and process parameters, the chuck contributes to predictable cycle times and reduced scrap rates. Contact Metav Werkzeuge for tailored clamping advice and rapid supply from our Emmerich location — specify the VSK-12A (SKU VSK-12A) for precise technical checks and ordering support Technical data Article number: VSK-12A SKU: VSK-12A GTIN: 4061905090585 Manufacturer: Vertex Facts Diameter: 315 mm Height: 156.5 mm Weight: 41 kg Mounting thread: 3xM16 eClass: 21020590 Special features 3 jaws Self-centring Reversible (internal/external clamping) Heavy-duty construction FAQ What is the primary application of this chuck? The VSK-12A 3-jaw, reversible, self-centring chuck by Vertex is intended for general lathe work and machining-centre turning where rapid alignment and repeatable clamping are required. How does the reversible, self-centring 3-jaw system function? The three jaws move simultaneously when actuated, centring the workpiece automatically; reversing the jaw orientation allows switching between gripping the exterior or the interior of a component without additional fixtures. What are the essential dimensions and mounting details to check before purchase? Key values are Ø 315 mm diameter, 156.5 mm height, and a mounting thread of 3xM16; the weight is 41 kg. Confirm these dimensions against the machine spindle and any adapter requirements. Is this chuck suitable for heavy-duty turning operations? The robust 41 kg construction and three-point clamping provide stable workholding for demanding turning tasks; suitability for specific cutting speeds and feeds should be evaluated against the machine and process conditions. What precautions are recommended for safe installation and handling? Due to the mass of the chuck, use appropriate lifting equipment or a team lift for mounting. Ensure correct engagement with the spindle thread and that fastening torque follows the machine manufacturer's guidance for safe operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine the DIN 6331 standard, a secure M16×2 thread and a compact 31 mm diameter to ensure reliable mounting and quick integration into assemblies. Order directly via Metav Werkzeuge or consult our specialists for precise application advice. Flange CFN1624 – Precision flange to DIN 6331 with M16×2 thread (Vertex) A Flange CFN1624 manufactured to DIN 6331 for secure fixture mounting and compact machine interfacing. Precision flange to DIN 6331 Thread M16×2 for secure mounting Compact 31 mm diameter design Lightweight 0.06 kg for easy handling Consistent alignment and secure mounting for fixtures The CFN1624 acts as a compact, standardised interface that supports repeatable alignment in tooling and fixture assemblies. Manufactured to DIN 6331, the component delivers a reproducible datum and thread engagement, which reduces setup variations and rework. The M16×2 thread provides a robust mechanical connection for medium-duty clamping elements, while the standard conformity simplifies sourcing and interchangeability across suppliers and machine types. Compact form that reduces assembly effort and rotating mass With a nominal diameter of 31 mm and a height of 24 mm, the component is designed for tight installations where space is limited. The low mass of 0.06 kg decreases handling effort during assembly and reduces inertial loads where the flange is used on moving subassemblies. These characteristics support faster assembly cycles and can contribute to smoother machine dynamics when integrated into spindles or rotary fixtures. Practical sourcing and industrial readiness Supplied under SKU CFN1624 by Vertex, the product is identified by GTIN 4061905087226 for clear inventory control and traceability. The combination of standard compliance and compact geometry makes the part suitable for use in fixture plates, clamping towers and bespoke tooling where a standardised flange interface is required. For any technical uncertainties about fit or application, Metav provides consultancy to verify compatibility with existing tooling and to support procurement decisions. For precision mounting solutions relying on the Vertex CFN1624, contact Metav Werkzeuge to arrange supply or technical matching and benefit from expert advice and reliable delivery from our Emmerich hub. Technical data Article number: CFN1624 GTIN: 4061905087226 Manufacturer: Vertex Facts Diameter: 31 mm Height: 24 mm Weight: 0.06 kg Thread: M16×2 mm Special features Conforms to DIN 6331 Designed for secure fixture mounting Compact, lightweight geometry Vertex product for industrial use FAQ What standard does this flange follow? The Vertex CFN1624 flange is manufactured to DIN 6331, ensuring standardised dimensions and interchangeability for tooling applications. What are the key dimensions and how do they affect installation? The CFN1624 has a 31 mm diameter and 24 mm height; these compact dimensions allow tight installation and help reduce rotating mass in dynamic assemblies. Which thread specification is provided for mounting? Mounting is via an M16×2 metric thread, offering secure engagement suitable for typical clamping and fixture connections using standard M16 fasteners. Is the weight relevant for moving assemblies? At 0.06 kg, the flange is lightweight, which reduces handling effort and contributes to lower inertial loads when used on rotating or moving subassemblies. How is the part identified for procurement and inventory? The flange is listed under SKU CFN1624 by Vertex and carries GTIN 4061905087226 for unambiguous ordering and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine robust load capacity with a swivelling axis and a compact precision worktop for secure, repeatable setups; benefit from a solid 300 x 449 mm base and clear specification of horizontal and vertical limits. Order the clamping table directly via Metav Werkzeuge or ask our consultants if needed Clamping table VUT-3230 — heavy-duty, swivelling workholding by Vertex The Clamping table VUT-3230 is a swivelling heavy-duty workholding table designed for stable positioning of parts during measurement and light machining tasks Heavy-duty: 70 kg horizontal load capacity Swivelling design for flexible positioning Precision worktop 320 x 298 mm Stable 300 x 449 mm base plate Stable heavy-duty support for accurate fixtures The VUT-3230 provides a heavy-duty platform that makes handling and positioning larger workpieces straightforward. With a specified 70 kg horizontal and 35 kg vertical load capacity, the table reduces the risk of deflection under load, which in turn improves the repeatability of clamped parts. The machine-like mass of the assembly, combined with a substantial base, creates a steady reference for measurement and light processing tasks, delivering a measurable improvement in setup reliability and process control. Compact precision surface that maximises usable workspace A precision worktop of 320 x 298 mm offers a defined clamping area while the 300 x 449 mm base plate provides secure anchoring to the machine or bench. The overall height of 169 mm and a mass of 83 kg contribute to rigidity and vibration damping. These dimensions translate into practical benefits: reduced movement during probing or manual operations and easier alignment to external fixtures or coordinate systems. The specification-led design simplifies integration into existing workflows where space and stability are both critical. Swivelling function and workshop advantages The swivelling feature increases flexibility for angled clamping and inspection without the need for additional fixturing, supporting quicker changeovers and fewer intermediate handling steps. Robust construction and a clearly stated load rating reduce uncertainty when specifying a workholding solution for inspection or assembly tasks. The combination of a defined worktop, stable base and swivel capability supports both ergonomic handling and precise positioning, fostering confidence in everyday workshop routines and quality assurance procedures. For application advice on the Vertex clamping table or to arrange a technical consultation, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271) Technical data Article number: VUT-3230 GTIN: 4061905090738 Manufacturer: Vertex Facts Weight: 83 kg Height: 169 mm Maximum load horizontal: 70 kg Maximum load vertical: 35 kg Worktop (messtisch): 320 x 298 mm Base (fuss): 300 x 449 mm eClass: 21020702 Special features Swivelling design for flexible positioning Intended for heavy loads and stable clamping Suitable for measurement and light machining tasks FAQ What is the maximum horizontal load for this clamping table? The maximum horizontal load is 70 kg for the Clamping table VUT-3230 by Vertex. What vertical load can be applied safely? The safe vertical load rating for the VUT-3230 is 35 kg. What are the worktop and base dimensions? The worktop measures 320 x 298 mm and the base plate is 300 x 449 mm on the Vertex clamping table VUT-3230. How heavy is the table and what does that mean for stability? The table weighs 83 kg; the mass contributes to rigidity and improved vibration damping during measurement and light processing. Is the table suitable for inspection and light machining tasks? Yes, the VUT-3230 is designed for secure workholding in measurement and light machining situations, offering a swivelling function and defined load ratings for reliable setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust, self-centring three-jaw solution that combines repeatable clamping, simple reversing for internal or external gripping, and secure mounting for steady machining. Order the chuck directly via Metav Werkzeuge or ask the consultants for matching adapters and mounting advice. VSK-13A — 325 mm three-jaw self-centring reversible chuck by Vertex The VSK-13A is a three-jaw chuck engineered for secure, repeatable workholding in turning and heavy-duty clamping applications, offering reversible jaw operation for internal and external gripping Self-centring three-jaw configuration Reversible jaws for internal/external clamping Stable heavy-duty construction Consistent clamping for repetitive turning tasks A self-centring three-jaw design provides rapid, concentric gripping of round and hexagonal stock, reducing setup time while maintaining positional accuracy across production batches. The chuck’s 325 mm diameter gives a broad contact surface for larger workpieces, which helps to distribute clamping forces more evenly and minimise part deformation. In practical terms, this means fewer re-adjustments and more parts produced within tolerance. The concept of self-centring is straightforward: all jaws move simultaneously and symmetrically when actuated, ensuring the spindle and workpiece share a common centre without manual alignment. Secure mounting and rigid support for heavy workloads Robust construction and a mass of 45.8 kg contribute to mechanical stability under cutting forces, reducing vibration and improving surface finish. The specified 3x M16 mounting thread pattern offers a conventional and dependable connection to compatible faceplates or adaptors, making integration into existing setups straightforward. The chuck’s 154.5 mm overall height balances reach and stiffness, permitting deep but stable engagement on larger parts. The reversible jaw function allows a quick change between external and internal clamping modes, extending versatility without the need for separate clamping sets. Workflow reliability and supply assurance from a trusted partner Manufactured by Vertex, the chuck is tailored for industrial use where repeatability and uptime are priorities. Specifying a proven workholding solution supports predictable cycle times and reduces scrap rates, a rational benefit for production planning. Metav’s role as a European quality filter ensures that acquiring this kind of tooling is backed by stocked availability and application advice from a supplier experienced in precision equipment. The combination of a recognisable brand and a direct supply chain supports long-term operational reliability and procurement transparency. Contact Metav Werkzeuge in Emmerich to check compatibility with existing spindles and to arrange supply of the Vertex VSK-13A three-jaw chuck Technical Data Article number: VSK-13A GTIN: 4061905091711 Brand: Vertex Facts Diameter: 325 mm Height: 154.5 mm Weight: 45.8 kg Mounting thread: 3x M16 ECLASS: 21020590 Special features Self-centring, 3 jaws Reversible operation for internal/external clamping Designed for lathe workholding FAQ What workpieces is this chuck best suited for? The Vertex VSK-13A three-jaw chuck excels with round and hexagonal stock and is designed for general lathe clamping where fast, concentric gripping is required. How does the reversible jaw function work? Reversible jaws on the VSK-13A can be turned to switch between external gripping (outer jaw faces) and internal gripping (inner jaw faces), allowing flexible clamping without additional jaw sets. Is the mounting compatible with common faceplates? The chuck mounts using a 3x M16 thread pattern; the VSK-13A is compatible with adapted faceplates and adaptor plates that accept this configuration. What does the weight indicate for setup and handling? With a weight of 45.8 kg, the chuck provides enhanced rigidity during machining; appropriate lifting equipment or team handling is recommended for safe mounting and removal. Can the chuck maintain concentricity across repeated setups? The self-centring mechanism of this three-jaw design is intended to provide repeatable centring, contributing to consistent concentricity in serial production runs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a compact, reliable step block that integrates into existing clamping systems to improve repeatability and setup speed; its small footprint and step-format geometry make it ideal for tight fixture layouts. Order directly via Metav Werkzeuge or consult our experts for application advice. Step Block – Vertex compact step block with step-format geometry, 32 x 30 x 19 mm Step Block is a compact fixture element designed to provide stable elevation and repeatable positioning in machining and clamping setups, suitable for workshop and industrial fixturing tasks Compact footprint 32 x 30 x 19 mm Step-design for secure clamping Precision-manufactured by Vertex Suitable for workshop fixturing Space-saving design for denser fixture layouts The compact footprint of this step-format block (measuring 32 x 30 x 19 mm) enables tighter component arrangement on tooling plates and vises, saving valuable working area. Where bench space or T‑slot real estate is limited, a smaller elevation element reduces interference with adjacent clamps and tooling heads. This geometry supports faster changeovers and contributes to shorter setup times, delivering a clear increase in process efficiency without requiring bespoke fixturing solutions. Consistent elevation and repeatability for machining operations The stepped profile ensures stable contact points for jaws and locating faces, promoting repeatable workpiece positioning across successive setups. By using a dedicated step element rather than improvised supports, setups become more predictable and inspection processes simpler. The design translates directly into fewer alignment adjustments, which reduces idle time on the machine and supports higher throughput while maintaining machining tolerances. Supply reliability and practical workshop benefits Sourced from Vertex, the block fits into a broad array of standard clamping routines and is suitable for both one-off jobs and series production due to its straightforward geometry. Stocking compact, standardised elements like this reduces the need for bespoke fixtures and simplifies inventory management. Combined with Metav Werkzeuge’s European distribution and quality filter in Emmerich, customers gain access to dependable supply, transparent ordering and a wide selection of complementary fixturing components for a coherent workshop setup. Contact Metav Werkzeuge in Emmerich to discuss integration into existing fixtures or to request a tailored supply recommendation for Vertex step block 5114B Technical Data Article number: 5114B GTIN: 4061905090486 Designation: Step Block Facts Dimensions: 32 x 30 x 19 mm eClass: 21170107 Special features Step-format geometry for elevation and indexing Compact size for space-efficient layouts Brand: Vertex FAQ What is the primary application of this block? The block is intended as a step-format fixturing element for elevation and repeatable positioning in clamping and machining setups, as supplied under the Vertex designation. Will this fit standard T-slot clamp systems? Compatibility depends on the specific clamp and plate dimensions; the block’s compact 32 x 30 x 19 mm size makes it suitable for many standard arrangements, but checking fixture geometry is recommended. Is the material specified for the step element? The raw data does not specify a material for the block; the Vertex product listing should be consulted for material and hardness details where required. Can the block be stacked or combined with other locating elements? The step geometry permits use alongside other locating and clamping components to create modular fixtures; ensure stable contact and clearance when combining elements. What identifying codes are associated with this item? The item is listed with SKU 5114B and GTIN 4061905090486 for straightforward ordering and inventory control. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable, compact support with consistent reference surfaces and proven Vertex manufacturing quality ensures stable clamping for small and complex set-ups; the compact dimensions (32 x 47 x 30 mm) and traceable SKU 5124B make integration into existing fixturing straightforward — order directly via Metav Werkzeuge or consult our advisors for application advice. Step Block — compact precision clamping accessory by Vertex, 32 x 47 x 30 mm The Step Block is a compact clamping accessory designed to provide stable, repeatable support in machining and fabrication workholding applications. Compact 32 x 47 x 30 mm footprint Accurate reference surfaces for repeatable set-ups Robust design for stable clamping applications Vertex quality, SKU 5124B and traceable documentation Consistent support for repeatable clamping A compact step block delivers a simple but crucial benefit: consistent support for repeatable fixturing. By offering defined contact planes and a controlled profile, this clamping accessory reduces variation between set-ups, which supports reliable machining tolerances and predictable production results. The combination of a stable geometry and a small form factor reduces the number of individual adjustments required during changeovers, helping to shorten setup times and maintain process stability. This is particularly relevant in batch production or when multiple identical fixtures are needed. Small footprint that suits tight workspaces With its compact dimensions of 32 x 47 x 30 mm, the component is intended for applications where space is limited but precision must not be compromised. The small footprint makes it straightforward to place multiple supports in a confined vice or on a fixture plate, enabling flexible height adjustments and multi-point support without encroaching on critical tool paths. The compact design also means easier stacking or nesting in modular clamping systems, allowing straightforward configuration changes while retaining measured support points. Clear documentation and traceability for quality processes Traceability and documentation support quality assurance: the product is supplied with visual references and image documentation, facilitating implementation into inspection records and setup instructions. The presence of a clear SKU (5124B) and a GTIN (4061905091797) assists in inventory control and order accuracy, while available technical imagery aids assembly and verification of orientation during installation. These elements help laboratories, toolrooms and production planners to integrate the component into standard operating procedures, reducing ambiguity and ensuring compliance with internal quality routines. For reliable, space-saving precision in workholding choose Vertex's Step Block (SKU 5124B) — contact Metav Werkzeuge in Emmerich for tailored application guidance or to arrange procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 5124B GTIN: 4061905091797 Dimensions: 32 x 47 x 30 mm eClass: 21170107 Brand: Vertex Key Figures Dimensions: 32 x 47 x 30 mm GTIN: 4061905091797 Special features Compact step block design Technical drawing available (see assets) Detail image available for inspection SKU: 5124B Brand: Vertex FAQ What is the primary purpose of this step block? The step block provides defined support planes for clamping and is intended to stabilise workpieces during machining and fixturing operations; the Step Block from Vertex is designed for repeatable support. What are the exact dimensions of the component? The component measures 32 x 47 x 30 mm and is specified under SKU 5124B for clear identification. Is documentation available to assist with set-up? Yes, technical drawing and detail images are provided to aid correct placement and orientation when integrating the step block into fixtures. How does the component support quality processes? With a traceable SKU (5124B) and GTIN (4061905091797), the part simplifies inventory management and documentation, supporting consistent setup procedures and inspection records. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a precise M18x2.5 mm thread engagement, a compact 32×48 mm footprint and a lightweight 0.228 kg construction that together enable reliable mechanical connections with minimal space impact. Order the coupling directly via Metav Werkzeuge or ask our consultants if needed. 2616M Coupling by Vertex — M18x2.5 mm thread, 32×48 mm compact design A 2616M coupling designed for compact mechanical connections in industrial and workshop equipment, offering precise thread engagement and easy installation. M18x2.5 mm standard thread Compact 32×48 mm footprint Lightweight at 0.228 kg Space-saving design for compact assemblies The compact 32×48 mm format reduces the installation footprint without compromising connection reliability. In applications where clearances are limited, the reduced envelope enables closer component placement and simplified routing. This space-saving characteristic is particularly useful in confined machine housings and assembly stations, where every millimetre counts. The result is improved layout flexibility and fewer modifications to neighbouring components during integration. Precise thread engagement for dependable connections Featuring a standard M18x2.5 mm thread, the coupling provides predictable mechanical mating with matching female fittings. The standardised thread dimension supports straightforward compatibility checks and reduces the need for bespoke adapters. Clear thread engagement ensures secure contact and stable axial alignment, which helps maintain assembly integrity under normal operating conditions and simplifies repeatable installation procedures for production environments. Lightweight construction and documentation for quick installation At 0.228 kg, the coupling is easy to handle during fitting and assembly, reducing operator fatigue and speeding up installation cycles. The low mass also minimises added inertia where moving parts are involved. A technical drawing and detailed images are available to confirm dimensions and mounting orientation, assisting planners and technicians with accurate pre-assembly checks. Combined with reliable supply channels, this supports efficient procurement and on-time integration in production and repair workflows. For compatibility verification or to arrange supply of Vertex 2616M couplings with M18x2.5 mm thread, contact Metav Werkzeuge for tailored advice and secure procurement. Technical data Article number: 2616M GTIN: 4061905093364 Manufacturer: Vertex Core specifications Dimensions: 32x48 mm Thread: M18x2.5 mm Weight: 0.228 kg ECLASS: 21131711 Special features Product type: Coupling Images: main, detail, technical drawing SKU: 2616M FAQ What applications is this coupling suitable for? The coupling is suited to compact mechanical connections in industrial and workshop equipment; the Vertex 2616M coupling is intended where a standard M18x2.5 mm threaded connection and a small footprint are required. Does the thread conform to common standards? Yes, the M18x2.5 mm thread on the 2616M coupling corresponds to the standard metric M18 thread profile, enabling compatibility with matching M18 female fittings. Where can the exact dimensions and mounting details be verified? A technical drawing and detailed images accompany the product, allowing verification of the 32x48 mm dimensions and installation orientation for the Vertex 2616M coupling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, standardised connection that simplifies fixture integration and reduces assembly time; combine the M20 x 2.5 mm metric thread with a space-saving 32 x 48 mm profile for consistent, repeatable joins. Order the part directly via Metav Werkzeuge or consult our specialists for technical matching. Coupling 2617M by Vertex — M20 x 2.5 mm thread, compact 32 x 48 mm design The Coupling 2617M is a compact mechanical coupling designed for precision workshop and fixture applications, providing a standard metric connection for reliable assembly and straightforward component interchange. Compact 32 x 48 mm construction M20 x 2.5 mm metric threaded connection Lightweight 0.208 kg for easy handling Consistent mechanical performance for precise assemblies The coupling uses a standard M20 x 2.5 mm thread, ensuring compatibility with widely used metric fixtures and housings; this standardisation reduces the need for bespoke adaptors and shortens setup times. By relying on a metric thread, maintenance and replacement become predictable tasks and tool changeovers are minimised, which supports uninterrupted production cycles. The connection geometry provides a secure mating that maintains alignment under typical workshop loads, improving overall assembly precision and repeatability. Space-saving design that simplifies integration With a compact 32 x 48 mm envelope and a 0.208 kg mass, the component is engineered for installations where space and inertia matter. The reduced size allows integration into confined assemblies and retrofits without major layout changes, while the low weight helps lower moving-mass effects in dynamic systems. These attributes benefit both hand-operated jigs and automated fixtures by making handling, positioning and balancing easier, which contributes to faster assembly and less machine adjustment. Traceable quality and straightforward stock handling The item is supplied under the Vertex brand and is identifiable by SKU 2617M and GTIN, enabling clear inventory tracking and procurement control. The standardised specification supports cross-referencing with existing parts lists and CAD models, aiding planners and buyers in verifying fit long before installation. For customers seeking assurance, the measurable parameters simplify acceptance checks: thread size and external dimensions are verifiable on delivery, which reduces the risk of incorrect components entering the workflow. Contact Metav Werkzeuge in Emmerich for a materials suitability check or to arrange prompt delivery from our European stock Technical Data Article number: 2617M GTIN: 4061905093951 ECLASS: 21131711 Facts Dimensions: 32 x 48 mm Thread: M20 x 2.5 mm Weight: 0.208 kg Special features Type: Coupling Manufacturer: Vertex FAQ What is the thread specification of this coupling? The coupling is supplied with a standard M20 x 2.5 mm metric thread suitable for common metric fixtures and connectors. Is the part suitable for compact fixture installations? Yes, the 32 x 48 mm profile and 0.208 kg weight make the coupling suitable for tight assemblies and retrofits where space and low mass are priorities. How can the component be identified for procurement? Refer to SKU 2617M and GTIN 4061905093951 when ordering; these identifiers match the Vertex coupling and aid stock control. Does the coupling require special tools for installation? Installation uses standard tools compatible with metric threads; no specialised equipment is necessary for typical assembly tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Secure clamping with a compact footprint and predictable repeatability, supplied as a set of four for fast modular fixturing; ideal where repeatable positioning and quick rebuilds matter. Order this clamping solution directly via Metav Werkzeuge or consult our advisors for matching the component to specific fixtures. T-slot clamping jaws CK-3714 — compact set of four, Vertex The T-slot clamping jaws are a compact workholding solution designed for use in T-slotted tables and fixtures, offering secure clamping in confined setups. Robust T-slot design for secure clamping Compact dimensions 32x53x38 mm Supplied as set of four for modular setups Reliable Vertex manufacturing Predictable repeatability for production fixtures The compact T-slot clamping elements deliver precision where consistent part location matters. Their geometry ensures repeatable contact points so setups remain stable across multiple cycles, reducing rework and scrap. In practical terms, the jaws clamp directly into standard slot profiles and transfer clamping force with minimal lateral play, which shortens setup time and supports steady throughput in batch runs. The design suits manual and semi-automated workflows, where fixture reliability directly affects productivity. Small footprint that simplifies fixture design With overall dimensions of 32x53x38 mm and a compact form factor, these clamping components free up table space and allow denser fixture layouts. Supplied as a set of four, the configuration supports modular arrangements and makes it easier to create repeatable nests without complex custom tooling. The modest mass—1.5 kg per set—also helps when reconfiguring fixtures frequently, as handling and repositioning are straightforward. This combination of size and modular supply reduces fixture complexity while maintaining secure workholding. Industrial compatibility and dependable sourcing Manufactured by Vertex, the CK-3714 components integrate with common T-slot systems and are supplied as a complete set for consistent use across a fleet of fixtures. The set format streamlines procurement and inventory control while ensuring matching contact geometry across all clamping points, which is particularly beneficial for quality-controlled production. For workshops seeking reliable sourcing, Metav acts as a quality filter for the European market and can advise on matching these clamping jaws to existing table profiles and clamping strategies. Contact Metav Werkzeuge today to discuss how the Vertex CK-3714 T-slot clamping jaws set can streamline fixture design and secure reliable workholding for your production. Technical data Article number: CK-3714 GTIN: 4061905095757 Manufacturer: Vertex Facts Dimensions: 32x53x38 mm Weight: 1.5 kg Items per set: 4 ECLASS: 21022190 Special features Sold as set Product type: T-slot clamping jaws Image file: ck-3718-main.jpg FAQ How are these clamping jaws mounted in a fixture? The T-slot clamping jaws are designed to be inserted into a standard T-slot and secured with the appropriate fastener; the CK-3714 set provides consistent contact geometry for repeatable mounting. Can the Vertex clamping jaws be used in automated stations? Yes, the Vertex CK-3714 clamping jaws are suitable for semi-automated and automated setups where standard T-slot workholding is required. Are the jaws supplied as a complete set for multi-point clamping? The product is supplied as a set of four, which supports multi-point and modular clamping arrangements without the need to match individual components. What size are the clamping jaws and how do they affect fixture layout? The compact dimensions of 32x53x38 mm reduce the fixture footprint and allow denser placement of clamping points for efficient use of table space. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining compact dimensions with consistent step geometry and proven clamping application logic enables accurate, repeatable workpiece positioning in constrained setups; rely on a small footprint and industry-standard classification for straightforward integration. Order the Step Block directly via Metav Werkzeuge or ask our consultants if needed. Step Block — compact clamping accessory, 32 x 97 x 59 mm | Vertex The Step Block is a compact clamping accessory designed for precise workpiece elevation and repeatable positioning within machine-shop and fixture setups. Small footprint 32 x 97 x 59 mm Repeatable step geometry for consistent positioning Compatible with standard clamping setups Classified for industrial use (ECLASS 21170107) Space-efficient design for constrained workstations The compact dimensions 32 x 97 x 59 mm deliver a clear benefit where bench and fixture space is limited: a reduced footprint means multiple blocks can be arranged without impeding access to the clamping area. In practice, the small size supports denser fixturing layouts while maintaining stable support for diverse setups. The dimension values are metric and can be used directly in nesting and fixture-planning documentation. Consistent positioning that improves throughput A clearly defined step geometry provides repeatability in elevation and alignment, reducing cycle time caused by manual height adjustments. When integrated into a clamping workflow, the block contributes to process stability by enabling the same reference height across successive operations. This leads to fewer adjustments, lower rework rates and improved overall machining throughput when used as part of a systematic fixturing approach. Practical integration into clamping systems The component is intended for use in clamping technology and can be combined with standard clamps and supports to form modular fixtures. Classification under ECLASS 21170107 facilitates parts management and procurement in industrial environments. The design suits mixed production contexts where compact, reliable elevation elements are required for repeatable assembly or machining tasks. For specification advice, availability in Europe and tailored supply from our Emmerich warehouse, contact Metav Werkzeuge — enquiries by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 are welcome. Technical Data SKU: 5134B GTIN: 4061905091575 Dimensions: 32 x 97 x 59 mm ECLASS: 21170107 Brand: Vertex Facts Metric dimensions: 32 x 97 x 59 mm ECLASS code: 21170107 GTIN numeric identifier: 4061905091575 Special features Compact step geometry Intended for clamping technology applications Industrial classification for parts management FAQ What is the primary purpose of this block? The Step Block by Vertex serves as a compact elevation and positioning element in clamping systems, enabling repeatable workpiece placement. Which dimensions should be used for fixture planning? Fixture plans should reference the block dimensions: 32 x 97 x 59 mm; these metric values are provided for accurate layout and nesting. Is the Step Block suitable for modular clamping setups? Yes, the component is intended for integration into standard clamping setups and can be combined with clamps and supports to form modular fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan