Ausstattungen für Fräsmaschinen

Take advantage of a robust mounting solution and precise alignment for Vertex VHO vices: the substantial mass and compact footprint keep clamped workpieces steady and reduce vibration for reliable machining. Order the base directly via Metav Werkzeuge or consult our specialists for application advice. HSO-6 Base for Vertex VHO Vices — 330 x 320 x 40 mm, 16.5 kg The HSO-6 is a dedicated base plate designed to secure Vertex VHO vices, providing a firm, low-profile foundation for workshop and production use. Precision base for Vertex VHO vices Solid construction for stable clamping Dimensions: 330 x 320 x 40 mm Mass 16.5 kg for vibration damping Greater machining accuracy through steady support A firm datum is essential for repeatable results; the HSO-6 base provides precise alignment for Vertex VHO vices so that setups remain consistent across batches. The defined footprint of 330 x 320 x 40 mm simplifies positioning on machine tables and assembly benches, while the 16.5 kg mass contributes to reduced vibration during cutting or finishing operations. This stability translates into fewer rejects and lower rework rates, improving process reliability in both small workshops and industrial cells. Faster set-ups and more reliable production flow By offering a stable, pre‑defined mounting surface, the base minimises time spent on clamping adjustments and alignment checks. The engineered interface to the VHO series ensures repeatable vice seating, which shortens changeover times and supports lean manufacturing practices. For production environments where throughput and consistency matter, the combination of a compact footprint and secure mounting reduces downtime and helps maintain cycle-time targets without compromising quality. Durable design for everyday workshop demands Constructed for everyday industrial use, the base is intended to withstand regular handling and frequent re‑clamping while keeping vice geometry intact. Compatibility with the Vertex VHO series ensures straightforward integration into existing fixtures and tooling layouts. The low-profile design supports accessibility around the clamped part, improving tool approach angles and operator ergonomics, thereby supporting safer and more efficient machining operations. Contact Metav Werkzeuge in Emmerich for tailored advice on selecting the HSO-6 base for secure precision clamping — email info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Data SKU: HSO-6 GTIN: 4061905087165 Item: Base for Vertex VHO vices ECLASS: 21029106 Core technical data Dimensions: 330 x 320 x 40 mm Weight: 16.5 kg Special features Compatible with Vertex VHO series Low-profile mounting surface Designed to reduce vibration during machining FAQ What is the primary purpose of this base? The HSO-6 base is designed as a stable mounting plate for Vertex VHO vices, improving alignment and reducing vibration for more consistent machining results. Which vices are compatible with the base? Compatibility is with the Vertex VHO vices; the HSO-6 is made to seat these vices securely and repeatably. How does the mass of the base affect machining? The 16.5 kg mass of the base increases stability and helps to dampen vibrations, supporting better surface finish and dimensional accuracy when the vice is under load. Can the base be used on any machine table? The base’s 330 x 320 x 40 mm footprint is suitable for many tables and benches; ensure the table area can accommodate the dimensions and that mounting holes match the intended clamping method. Is the HSO-6 suitable for production environments? Yes, the HSO-6 is intended for regular workshop and production use, offering repeatable seating for Vertex VHO vices to support efficient machining workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine the 10 kg mass, a compact 335 x 310 x 40 mm footprint and dedicated compatibility with Vertex VHT vises to secure stable clamping and reduce vibration during machining; order the Base via Metav Werkzeuge or consult our specialists for fitment advice. Base HS-6 for Vertex VHT vises — sturdy 10 kg support, 335 x 310 x 40 mm The Base HS-6 is a compact mounting plate designed for use with Vertex VHT vises, providing a stable platform for workshop clamping and machining operations. Solid 10 kg construction for stable clamping Designed for Vertex VHT vises compatibility Compact footprint 335 x 310 x 40 mm Improved machining accuracy through heavier support The substantial 10 kg mass of the plate acts as a passive damper, delivering reduced vibration during cutting and grinding operations. This increased mass helps keep the workpiece steady, which in turn improves surface finish and repeatability. For operations where tool chatter or micro-movements can compromise tolerances, the heavier support reduces the need for repeated rework and contributes to a smoother production flow, providing a clear efficiency gain on the shop floor. Save bench space with a compact mounting solution With overall dimensions of 335 x 310 x 40 mm, the plate offers a compact footprint that frees up valuable bench area without sacrificing stability. The shallow profile enables integration into existing workstations or fixture tables while keeping the clamping height low, simplifying access for assembly and inspection tasks. Where shop layouts are constrained, this space-efficient support allows for flexible equipment arrangement and easier handling of larger vises or assemblies. Compatibility and practicality for everyday workshop use Designed specifically for use with Vertex VHT vises, this mounting plate streamlines setup by matching common vise interfaces and alignment practices. The robust construction supports faster fixturing and quick alignment, reducing time spent on preparatory steps and improving overall throughput. Sourcing such components through a trusted supplier helps maintain consistency across workstations and supports reliable supply for ongoing production needs. For reliable clamping solutions compatible with Vertex equipment, contact Metav Werkzeuge for personalised advice and secure supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: HS-6 GTIN: 4061905093005 Designation: Base Compatibility: for Vertex VHT vises Dimensions: 335 x 310 x 40 mm Weight: 10 kg ECLASS: 21029106 Facts Weight: 10 kg Dimensions: 335 x 310 x 40 mm ECLASS code: 21029106 Special features Compatibility with Vertex VHT vises Compact, low-profile design Gallery images available FAQ Is the plate compatible with Vertex VHT vises? Yes. The Base HS-6 is specified for use with Vertex VHT vises and fits the common mounting arrangements for that series. What are the exact external dimensions of the support plate? The plate measures 335 x 310 x 40 mm and is designed for a low-profile mounting that saves bench space. What is the weight and how does it affect machining? The plate weighs 10 kg; the added mass reduces vibration and helps to stabilise workpieces during machining, improving surface finish and repeatability. Is the material specified for the plate? Material information is not provided in the product data; the specification focuses on dimensions, weight and compatibility. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of stable construction, precise MT‑4 spindle compatibility and easy mounting to standard tables for reliable indexing operations; order the Universal dividing head directly via Metav Werkzeuge or consult our specialists for application advice. Vertex BS-2 Universal Dividing Head – MT‑4 spindle, 25 mm T‑slot base A Vertex BS-2 Universal Dividing Head for accurate indexing and angular machining on machine tables and milling machines Robust 65 kg solid construction MT‑4 Morse taper spindle Base compatible with 25 mm T‑slot Stable setup for repeatable indexing and machining The heavy 65 kg mass gives the unit a stable platform that minimises vibration during indexing and light machining operations, helping to maintain repeatable results. With compact overall dimensions of 340 x 359 x 235 mm, the head occupies little table space while providing a rigid mounting point. The combination of mass and compact footprint is designed to reduce chatter and support consistent angular positioning when used on suitable machine tables and fixtures. Precision spindle interface and secure mounting Equipped with a Morse taper (MT‑4) spindle, the device offers a widely used, serviceable interface for collets and arbors, enabling straightforward tool and workpiece attachment. The base is designed for a 25 mm T‑slot mounting, allowing direct clamping to compatible tables without additional adapters. These features simplify integration into existing setups while supporting accurate rotational indexing and repeatable alignment for chamfering, slotting or light dividing tasks. Practical workshop handling and set-up benefits The unit’s dimensions and mounting specification facilitate straightforward positioning on a workshop table; the compact footprint reduces the need for extensive retooling of the work area. The robust construction supports stable operation across routine machining cycles and helps to protect positional accuracy over time. Clear, measurable data on weight and size enable planning for handling and fixturing in machine shops, supporting effective workflow integration. Suited for professional shop environments Designed by Vertex as a universal indexing solution, the BS‑2 offers reliable mechanical features that support efficient set-up and reduced rework. The MT‑4 spindle interface and 25 mm T‑slot compatibility contribute to fast installation and repeatable operation, delivering a pragmatic combination of adaptability and mechanical stability that aligns with professional production demands. Contact Metav Werkzeuge in Emmerich for detailed mounting advice or application consultation via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery options Technical data Article number: BS-2 GTIN: 4061905084485 Manufacturer: Vertex Facts Weight: 65 kg Dimensions: 340 x 359 x 235 mm T‑slot width: 25 mm Special features Spindle taper: MT‑4 (Morse taper) Product type: Universal dividing head ECLASS: 21020590 FAQ What is the primary function of this dividing head? The BS-2 Universal dividing head by Vertex is intended for accurate indexing and angular machining on machine tables and milling machines. How is the unit mounted to a machine table? Mounting is achieved via the base designed for a 25 mm T‑slot, allowing the Vertex BS-2 to be clamped securely to compatible T‑slot tables. What spindle taper does the product use? The Vertex BS-2 uses a Morse taper spindle, specified as MT‑4, for collets and arbors. What are the dimensions and weight for planning installation? The BS-2 has dimensions of 340 x 359 x 235 mm and a weight of 65 kg, allowing for straightforward handling and fixture planning. Is the dividing head suitable for heavy-duty machining? The robust mass and compact design of the Vertex BS-2 provide good stability for indexing and light to moderate machining tasks; suitability for specific heavy-duty operations should be evaluated against machine capability and fixturing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precision indexing, robust mass for vibration damping and the convenience of an integrated 6" chuck for consistent results in serial milling and drilling. Order the unit directly via Metav Werkzeuge or consult the technical team for application advice. Universal Dividing Head BS-2-J-6 – Vertex, MT‑4 taper, 6" chuck The BS-2-J-6 universal dividing head is a precision indexing device designed for accurate angular positioning on milling machines, offering a compact footprint and a robust mounting solution for a wide range of workshop tasks. MT-4 spindle taper for stable mounting Includes a 6" chuck for workpiece clamping High mass (78.5 kg) for improved vibration damping 25 mm T-slot base for secure table installation Consistent precision through mass and mechanics Built to deliver repeatable angular positioning, this indexing head relies on its substantial mass and well-balanced construction to reduce vibration during cutting operations. The heavy build, specified at 78.5 kg, contributes directly to repeatability and surface quality when performing serial workpieces, meaning fewer rejects and less rework. The compact external dimensions (340 x 359 x 235 mm) make the unit suitable where floor space is limited, while the mechanical design focuses on delivering consistent angular accuracy across repeated cycles. Where accuracy matters, stability translates into measurable time and material savings. Flexible mounting and straightforward compatibility The device is supplied with an MT‑4 spindle taper and a 6" chuck, allowing direct installation in compatible mill spindles or mounting fixtures. The 25 mm T‑slot base aligns with standard table slots, simplifying clamping and orientation on machine tables. These features combine to make the unit adaptable: it supports a variety of clamping arrangements without bespoke fixturing and facilitates quick setup changes between jobs. The practical interface elements reduce machine downtime and support lean workflows in production environments that require frequent job changes. Workshop-ready design for reliable operation Manufactured by Vertex, the dividing head emphasises durability and ease of integration into existing machine tool fleets. The machining and finishing of mating surfaces ensure a secure seating in MT‑4 arrangements, while the included chuck lowers the number of additional accessories required for initial use. Maintenance is kept straightforward through accessible components and a design that prioritises longevity; this gives procurement teams confidence in lifecycle performance and maintenance planning. The product footprint and specification reflect a balance between performance and usability for industrial workshops. Discuss specifications or request a shipping quote from Metav Werkzeuge for the Vertex BS-2-J-6, dispatchable from Emmerich; contact info@metav-werkzeuge.com or phone +49 2822 7131930 for personalised advice and delivery options Technical data Article number: BS-2-J-6 GTIN: 4061905089916 Manufacturer: Vertex Core dimensions & weight Dimensions: 340 x 359 x 235 mm Weight: 78.5 kg T‑slot width: 25 mm Features & compatibility Spindle taper: MT-4 Included: 6" chuck ECLASS: 21020590 FAQ What mounting taper does the unit use? The Vertex BS-2-J-6 uses an MT‑4 spindle taper for mounting and seating in compatible fixtures. Is a chuck included with the dividing head? Yes, the BS-2-J-6 is supplied with a 6" chuck for immediate clamping capability. What are the dimensions and footprint of the device? The dividing head measures 340 x 359 x 235 mm and has a compact footprint suitable for table mounting. How heavy is the unit and why is that important? The unit weighs 78.5 kg; the mass improves vibration damping and contributes to more consistent machining results. Can the base be clamped to standard machine T‑slots? The base is designed for a 25 mm T‑slot, allowing secure installation on standard machine tables. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a stable, precision indexing solution with an MT‑4 spindle taper and an 8" chuck for reliable workholding; the robust 80 kg construction and 25 mm T‑slot base ensure vibration damping and repeatable results in demanding machining setups. Order the Universal dividing head directly via Metav Werkzeuge or consult the Metav team for application advice. Universal dividing head BS-2-J-8 — MT‑4 spindle, 8" chuck (Vertex) The Universal dividing head BS-2-J-8 is a precision indexing and workholding device designed for milling and drilling operations, supplied with an 8‑inch chuck and MT‑4 mounting for secure attachment to compatible machine spindles. MT-4 spindle taper Includes 8" chuck 25 mm T-slot base Solid 80 kg construction Precision indexing for consistent machining results A dividing head converts rotary motion into accurate angular positioning, enabling indexed cuts, drilled bolt circles and precise angular milling. The weighty construction of this indexing head and its MT‑4 mounting deliver a secure interface that reduces runout and improves repeatability. Because the device is supplied with an 8‑inch chuck, operators can clamp a wide range of workpieces directly, minimising intermediate fixturing. The combination of mass and clamping capacity translates into smoother feeds and a finer surface finish, which is particularly beneficial when producing small batches or setting up for prototype runs. Clear mechanical indexing reduces setup time compared with improvised fixtures and supports consistent output across multiple components. Built for stability and heavy-duty shop use Mass and rigidity are fundamental to stable machining. The device’s 80 kg construction provides inherent damping, limiting vibration and chatter during cutting, which in turn extends tool life and improves dimensional accuracy. The base accepts a 25 mm T‑slot, allowing secure bolting to machine tables or heavy-duty fixtures without custom adapters. The inclusion of a substantial 8‑inch chuck offers direct clamping of irregular or cylindrical components, removing the need for additional collets in many applications. Together, these characteristics support operations that demand robustness — from occasional heavy cuts to repetitive, high-precision indexing tasks — while keeping set‑up procedures straightforward and efficient. Smooth integration into production workflows Compact external dimensions (340 x 359 x 235 mm) make the head easy to accommodate on milling tables with limited envelope space, while the MT‑4 interface aligns with common spindle tapers for straightforward installation. The construction is suited to bench or machine‑table mounting where a reliable datum and fixed axis are required. For shops aiming to streamline fixturing, the head’s combination of precise indexing and broad clamping capability reduces the number of bespoke fixtures needed, lowering tooling overhead. Routine maintenance consists of lubrication and inspection of the chuck and spindle interface to maintain precision; the robust mechanical design simplifies service intervals and minimises unforeseen downtime. Contact Metav Werkzeuge for detailed application guidance and to secure the Vertex Universal dividing head BS-2-J-8 with MT‑4 spindle and 8‑inch chuck for stable, repeatable workholding solutions Technical data SKU: BS-2-J-8 GTIN: 4061905090981 Manufacturer: Vertex Core specifications Weight: 80 kg Dimensions: 340 x 359 x 235 mm T-slot width: 25 mm Special features 8" chuck included Mounting: MT-4 eClass: 21020590 FAQ Is the device compatible with standard milling spindles? The Universal dividing head BS-2-J-8 fits machines that accept an MT‑4 taper; Vertex designed the mounting to match common MT‑4 interfaces for straightforward integration. What chuck size is delivered with the unit? An 8‑inch chuck is supplied with the BS-2-J-8, allowing direct clamping of a wide range of workpiece diameters without immediate need for additional adapters. Which T‑slot size is required for mounting? The base is compatible with a 25 mm T‑slot, enabling secure bolting to machine tables or fixtures where standard 25 mm slots are used. How does the unit’s weight affect machining performance? At 80 kg, the head provides substantial mass for vibration damping; this improves surface finish and repeatability in precision milling and drilling tasks when using the Vertex dividing head BS-2-J-8. What typical applications suit this dividing head? The BS-2-J-8 is suitable for indexed milling, drilling bolt circles and other precision angular operations where reliable workholding and repeatable indexing are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of DIN 6331 compatibility, a secure M18×2.5 thread and compact dimensions for reliable, repeatable mounting in production environments. Order the flange directly via Metav Werkzeuge or contact the consultants for tailored advice. Flange CFN1827 – DIN 6331 compliant flange with M18×2.5 thread, Ø34 mm (Vertex) A Flange CFN1827 engineered for standardised mounting and alignment in tooling and fixture systems according to DIN 6331. DIN 6331 compliance for standardised mounting Thread M18×2.5 for secure fastening Compact diameter Ø34 mm for tight assemblies Lightweight construction at 0.09 kg for easy handling Reliable, standard-compliant mounting for repeatable alignment The flange is designed to meet DIN 6331, ensuring standardised interfaces across compatible tooling systems. By adopting a component with defined norms, setup times are reduced and positional repeatability is improved, which is crucial for serial production and precision machining. The emphasis on established standards supports process reliability and facilitates interchangeability between fixtures and spindles. Secure fastening and mechanical integrity with M18×2.5 A clearly specified M18×2.5 thread provides a robust attachment point that resists loosening under typical operational loads. The defined thread geometry allows for consistent torque application and predictable clamping behaviour, which contributes to stable toolholding and reduced vibration. This mechanical reliability supports higher process stability and fewer interruptions for retightening. Space-saving form factor that supports efficient workflows With an outer diameter of Ø34 mm and a height of 27 mm, the component offers a compact footprint that integrates easily into tight assemblies and multi-component fixtures. The low mass of 0.09 kg reduces added inertia where rapid tool changes or high-speed operations are required, aiding dynamic performance without compromising structural stability. The compact design also simplifies storage and handling in busy workshops. Quality provenance and suitability for industrial use Manufactured by Vertex, the flange is represented under SKU CFN1827 and supplied with technical documentation and imagery for straightforward specification checks. The combination of standard conformity and precise dimensions supports use in prototyping, small-batch production and larger-scale manufacturing where consistent mounting geometry is essential. Specification-focused components like this promote predictable results and streamlined quality checks. Contact Metav Werkzeuge for advice on integration and order placement — Metav in Emmerich combines decades of precision expertise with a broad product range to ensure the right component for the task Technical Data Article number: CFN1827 GTIN: 4061905089275 Manufacturer: Vertex EClass: 37029205 Core technical data Diameter: 34 mm Height: 27 mm Thread: M18×2.5 mm Weight: 0.09 kg Compliance & features Compliant with DIN 6331 Designation: Flange Images available: technical drawing, detail photo FAQ Is this flange compatible with DIN 6331 tooling systems? Yes. The flange is specified as compliant with DIN 6331 and is intended for use in standardised mounting arrangements where that norm is required. What are the exact dimensions and mass of the component? The flange has an outer diameter of Ø34 mm, a height of 27 mm and a mass of 0.09 kg, as listed for SKU CFN1827 from Vertex. Which thread form is used for fastening and how is it applied? Fastening uses an M18×2.5 thread, allowing controlled torque application and secure mechanical connection in fixture assemblies. Can this flange be used in high-speed tool changes? The compact form and low mass support integration into systems requiring rapid changes; suitability should be assessed in context of the full toolholding assembly and operating speeds. Where can additional technical drawings or images be obtained? Technical drawing and detail images are available alongside the product listing; further documentation can be requested through Metav Werkzeuge if required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the lever-operated action and a 350 cm³ reservoir combined with a maximum delivery pressure of 15 kg/cm² to maintain consistent lubrication cycles; order the Vertex unit directly via Metav Werkzeuge or contact our consultants for application advice. LT-6 Hand Lubrication Pump (lever-operated) by Vertex — 350 cm³, 15 kg/cm² The LT-6 hand lubrication pump is a lever-operated lubrication unit intended for controlled manual dispensing of greases and oils in workshop and maintenance environments. Lever-operated design for precise dosing 350 cm³ reservoir for extended use Delivers up to 15 kg/cm² pressure Consistent lubrication through precise dosing A lever pump ensures precise dosing with every stroke, which reduces waste and prevents both under- and over-lubrication in bearings and machine joints. With a maximum delivery pressure of 15 kg/cm², the pump provides reliable force for dense greases while maintaining controlled output, so lubrication intervals can be standardised and predictable. This performance-oriented approach supports higher process reliability and lower rework rates in routine maintenance. Fewer interruptions from a generous reservoir The 350 cm³ reservoir reduces refill frequency, supporting longer continuous operation between maintenance tasks and contributing to reduced downtime. When used for scheduled servicing, the larger capacity translates directly into fewer interruptions on the shop floor, streamlining maintenance workflows and allowing technicians to focus on critical adjustments rather than frequent top-ups. Compact, transportable design for workshop use Despite its substantial capacity, the unit retains a compact footprint of 85 × 85 mm and a light weight of 1.2 kg, which makes it easy to position at grease points or carry between workstations. The compact dimensions support flexible storage and straightforward integration into a toolbox or service trolley, enabling teams to bring precise lubrication where it is needed without adding bulk. Straightforward operation to speed up routine tasks The lever-operated mechanism gives direct tactile feedback for metered application, enabling controlled dispensing without electrical power. The simple manual operation reduces complexity for site technicians and facilitates consistent technique across shifts. Supplied through Metav’s quality filter in Emmerich, the unit benefits from a distribution chain focused on reliability and accessible technical expertise for industrial customers. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex LT-6 lever pump or request detailed specifications by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: LT-6 Brand: Vertex GTIN: 4061905088384 eClass: 23069090 Core technical data Capacity: 350 cm³ Max. pressure: 15 kg/cm² Dimensions: 85 × 85 mm Weight: 1.2 kg Special features Lever-operated design Compact footprint Suitable for manual lubricant dispensing Type: with lever FAQ How much lubricant does the pump hold? The Vertex LT-6 hand lubrication pump holds 350 cm³, providing extended service intervals before refilling is required. What is the maximum delivery pressure of the pump? The LT-6 delivers up to 15 kg/cm², which is suitable for the controlled application of high-viscosity greases. Is the LT-6 suitable for general workshop maintenance? Yes, the Vertex LT-6 lever-operated pump is designed for workshop lubrication tasks and supports consistent, manual dispensing of greases and oils. How should the pump be maintained? Regular checks of the LT-6 reservoir level and a wipe-down of external surfaces are recommended; replace seals if leakage is observed and keep the lever mechanism free of debris. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Achieve reliable, repeatable clamping with the combination of 4,500 kgf clamping force, an extra-large 0–350 mm jaw opening and a vibration-damping cast-iron body; order the unit directly via Metav Werkzeuge or contact our consultants for application advice. Hydraulic machine vice VMCH-6 — 4,500 kgf clamping force, 0–350 mm opening (Vertex) The Hydraulic machine vice VMCH-6 is a hydraulically operated clamping device designed for industrial machining and workshop use, offering an extra-large jaw opening for oversized components. 4,500 kgf clamping force for heavy work Extra-large 0–350 mm jaw opening Cast-iron body for long-term stability Precision tolerance 0.01 mm Secure hydraulic clamping for heavy machining The VMCH-6 uses a hydraulic actuation system to deliver a steady 4,500 kgf of clamping force, which ensures workpieces remain fixed under heavy cutting loads. Hydraulic clamping produces a consistent pressure curve compared with manual or mechanical vises; this reduces micro-movement during roughing and finishing operations and improves tool life. The robust actuation also lowers operator variability, making the unit suitable for repeat production runs where consistent clamping pressure matters. Wide opening and stable construction for large workpieces A jaw opening of 0–350 mm allows the vice to accommodate larger components or fixtures that would not fit standard machines, extending the vice’s applicability across milling and drilling tasks. The body is manufactured from cast-iron, a material selected for its excellent damping properties and dimensional stability; its mass (approx. 63.5 kg) helps absorb cutting forces and reduces chatter, delivering a steadier machining process. The compact overall dimensions support installation on a range of machine tables while still providing a large usable throat. High repeatability and machining precision The clamping system is specified to an accuracy of 0.01 mm, a level of repeatability that supports precision milling and fine finishing operations. Such tolerance is critical when the same clamping reference must be used across multiple setups or when interchangeable fixturing is required. The vice’s repeatable performance reduces setup time between batches and contributes directly to quality assurance in small-series and production environments. Built for workshop efficiency and long service life Hydraulic operation minimises manual effort during clamping and unclamping, speeding up cycle times without compromising holding power. The combination of sturdy construction and straightforward mechanical layout keeps routine maintenance simple and predictable, supporting continuous operation on production lines. Designed as a professional clamping solution, the unit pairs well with machining centres and jigs where durability and stability are priority requirements. For reliable heavy-duty clamping choose the Vertex VMCH-6 and contact Metav Werkzeuge for a tailored quotation or technical consultation: info@metav-werkzeuge.com, +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data SKU: VMCH-6 GTIN: 4061905090998 Manufacturer: Vertex Facts Clamping force: 4,500 kgf Jaw opening: 0–350 mm Accuracy: 0.01 mm Weight: 63.5 kg Dimensions: 159x618x156 mm Materials and features Material: Cast iron Type: Hydraulic ECLASS: 21020601 ETIM: EC002173 FAQ What clamping force does the vice provide? The vice delivers a clamping force of 4,500 kgf, which makes the VMCH-6 suitable for demanding machining tasks requiring high holding power. What size of workpiece can be accommodated? The jaw opening of 0–350 mm allows the vice to clamp larger components and fixtures that are common in milling, drilling and general machining operations. How precise is the clamping and repeatability? The vice is specified with an accuracy of 0.01 mm, offering the repeatability needed for precision machining and multi‑setup production processes. What is the construction material and how does it affect machining? The body is made from cast iron; this material provides vibration damping and mass stability, which reduces chatter and improves surface finish during cutting. What are the weight and mounting considerations for the vice? The vice weighs approximately 63.5 kg and has overall dimensions of 159x618x156 mm; its mass provides stability but requires an appropriately rated machine table or fixture for secure mounting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precision indexing, robust load capacity and standard MT-4 compatibility for reliable multi-axis setups; order the unit directly via Metav Werkzeuge or consult Metav’s specialists for application advice. HV-14 Rotary Table (Horizontal/Vertical) by Vertex — 353 mm, MT-4 The HV-14 is a versatile rotary table designed for precise horizontal and vertical indexing in milling and metalworking fixtures. 353 mm precision rotary table MT-4 spindle taper for standard tooling 130 kg horizontal / 70 kg vertical load 6 × 16 mm T-slots for secure fixturing Consistent precision for indexed machining The indexing mechanism delivers a clear and reproducible angular step, with a 4° per spindle revolution setting that simplifies rapid dividing tasks. A fine vernier readout with a 10" division enables more accurate adjustments than coarse indexing alone; this combination reduces rework and shortens cycle setup. For production environments where consistent positioning is essential, the result is fewer tool changes and improved throughput. The construction supports steady rotational motion, ensuring repeatable results even during medium-duty milling or finishing operations. Robust build and stable support for heavier setups Built to withstand demanding workshop conditions, the unit provides a 130 kg horizontal load capacity and 70 kg in vertical orientation, supporting sizeable workpieces and fixtures. The 353 mm table diameter gives a practical working area while the overall footprint of 445 × 389 × 123 mm keeps the assembly compact on the machine table. With a mass of 76.61 kg and a table height of 125 mm, the assembly offers stability that reduces vibration during cutting, which in turn improves surface finish and dimensional consistency on machined parts. Standard interfaces and flexible fixturing Equipped with an MT-4 spindle taper for direct compatibility with common tooling and a set of 6 × 16 mm T-slots, the table accepts standard clamps and modular fixtures without the need for custom adapters. The horizontal/vertical capability expands the range of operations from angular milling to rotary indexing and light-angle cutting. Integration into existing milling centres is straightforward, providing a practical way to increase capability without extensive re-engineering of the machine setup. The combination of recognised interface standards and secure clamping features supports fast changeovers and reliable repeatability. Contact Metav Werkzeuge for tailored advice on integrating the Vertex HV-14 rotary table into production and to arrange reliable supply from Emmerich. Technical data SKU: HV-14 GTIN: 4061905089466 Manufacturer: Vertex ECLASS: 36600610 Facts Table diameter: 353 mm Overall dimensions: 445 × 389 × 123 mm Height: 125 mm Weight: 76.61 kg Max load horizontal: 130 kg Max load vertical: 70 kg Spindle indexing per rotation: 4° Readout division: 10" T-slots: 6 × 16 mm Special features Horizontal/vertical operation MT-4 spindle taper 6 × 16 mm T-slots for fixturing Compact footprint for machine tables FAQ What maximum workpiece weight can the rotary table support horizontally? The Vertex HV-14 rotary table supports up to 130 kg in the horizontal position, suitable for medium-weight fixtures and workpieces. Is the table suitable for vertical mounting on a milling machine? Yes, the unit is designed for both horizontal and vertical use and carries a vertical load rating of 70 kg when mounted accordingly. Which spindle taper is provided for tooling connection? The table is supplied with an MT-4 spindle taper, allowing direct use of common Morse-taper tooling and adapters. How fine is the indexing and how is accuracy indicated? Indexing is driven at 4° per spindle revolution, with a vernier readout providing a 10" division for finer adjustment during set-up. What options are available for clamping the workpiece? The table features 6 × 16 mm T-slots, which accept standard clamps and modular fixturing systems for secure workholding. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine compact dimensions, a standard 5/8-11 thread and a lightweight construction of 87 g for dependable fixture connections and fast assembly. Order the flange directly via Metav Werkzeuge or contact the consultants for tailored advice. Flange 4515I – Vertex: 5/8-11 thread, 35 × 20 mm A Flange 4515I designed for secure mechanical connections in clamping, fixture and mounting applications. Precision 5/8-11 thread for secure fastening Compact 35 × 20 mm form factor for tight spaces Lightweight 87 g construction for low inertia Compatible with standard 5/8-11 components Improved alignment and reliable fastening for production workflows The flange is engineered to deliver consistent alignment where repeatability matters. With a clear specification of the 5/8-11 thread, the component enables straightforward mechanical engagement with matching fastenings, reducing set-up times and the need for bespoke adaptors. The compact 35 × 20 mm footprint is beneficial where space is constrained, while the lightweight nature of the part keeps moving masses low, which in turn helps to maintain dynamic stability in jig and fixture assemblies. Easy integration and reduced machine downtime Designed for compatibility with industry-standard threaded connections, the part is suitable for rapid replacement and interchangeability. Using a standard 5/8-11 thread simplifies inventory management and ensures that thread-matched replacement parts are readily available. This interchangeability leads to lower machine downtime and improves overall equipment efficiency, supporting a more predictable production rhythm without compromising mechanical security. Practical handling, storage and procurement advantages The compact dimensions and modest mass make the item easy to handle in assembly and maintenance operations, while the clear SKU and identification support orderly stock control. Procuring through Metav ensures access to a curated selection and a reliable supply chain: Metav acts as a quality filter for the European market, combining decades of know-how with centralised logistics from Emmerich, which helps to minimise lead times and delivery uncertainty. For reliable fixture components from Vertex, contact Metav Werkzeuge for expert advice and secure supply from our Emmerich quality filter Technical Data Article number: 4515I GTIN: 4061905088056 ECLASS: 37029205 Brand: Vertex Numbers / Core data Dimensions: 35 × 20 mm Weight: 0.087 kg Thread: 5/8-11" Special features / Versions Designation: Flange SKU: 4515I Images available for technical reference FAQ What thread standard does this flange use? The flange uses a 5/8-11 thread, specified for the Flange 4515I by Vertex to ensure secure mechanical engagement. Which applications are typical for this component? Typical uses include clamping, fixture and mounting applications where a compact 35 × 20 mm flange with a 5/8-11 thread provides a secure connection. How does the weight affect handling and dynamics? At 0.087 kg (87 g) the lightweight construction reduces moving mass in assemblies, improving dynamic behaviour during machine operation for the Vertex flange 4515I. Is the Flange 4515I interchangeable with other 5/8-11 components? Yes, the Flange 4515I is intended to interface with standard 5/8-11 fittings, supporting quick replacement and compatibility with commonly stocked fastenings. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of a compact footprint and a standard M16x2mm threaded connection ensures reliable mounting and quick changeovers; combine this with lightweight construction for easy handling and order via Metav Werkzeuge or consult our specialists for precise application advice Flange 4515 by Vertex — compact threaded flange with M16x2mm connection and 35×20 mm profile Flange 4515 is a compact threaded mounting component designed for secure clamping and fixture applications in machine shops and production jigs Standard M16x2mm threaded connection for compatibility Compact 35×20 mm profile for space-saving setups Lightweight at 0.087 kg for easy handling Vertex quality for workshop and industrial use Secure mounting with a standard thread for repeatable set-ups The compact flange provides a standard M16x2mm threaded interface that simplifies integration into existing clamping and fixturing systems. Its precise 35×20 mm dimensions are suited to confined spaces where repeatability is essential, while the low mass (0.087 kg) reduces inertia during handling and installation. Because the connection is a widely used metric thread, mechanical joining and replacement are straightforward, reducing downtime and supporting consistent production quality. Built for compatibility in workshop and fixture assemblies Designed with standardised connections, this component integrates seamlessly into jigs, fixtures and holding systems commonly found in metalworking and general workshop environments. The standard thread ensures interchangeability with existing fasteners and adaptors, enabling rapid assembly and straightforward retrofitting. The compact form factor supports high-density layouts on tooling plates and allows efficient use of clamping points without sacrificing stability. Reliable sourcing and practical supply for industrial use Manufactured by Vertex, the component benefits from a production and quality regime tailored to workshop requirements. Sourcing through Metav Werkzeuge offers a practical supply chain advantage: a European stocking point in Emmerich acts as a quality filter, ensuring consistent delivery and availability for everyday workshop demands. For procurement decisions this combination of standard interfaces and dependable sourcing supports uninterrupted workflows and predictable maintenance planning. Request technical clarification or a stock check from Metav Werkzeuge in Emmerich for the Vertex flange with M16x2mm thread (SKU 4515) — contact our product specialists via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4515 GTIN: 4061905093258 ECLASS: 37029205 Facts Dimensions: 35×20 mm Thread: M16x2mm Weight: 0.087 kg Special features Designation: Flange Manufacturer: Vertex Compact, threaded connection for fixture mounting FAQ What is the thread specification of the flange? The flange is supplied with a standard M16x2mm threaded connection; this specification is stated for the Vertex flange (SKU 4515) and supports common metric fasteners. Are the dimensions suitable for tight installations? Yes, the 35×20 mm profile is intended for space-constrained setups and is suitable for compact fixture layouts where a small footprint is required. What is the component weight and how does that affect handling? The component weighs 0.087 kg, which makes it easy to handle during assembly and reduces added mass in fixture systems. Is the material specified for this flange? The product data does not specify the material for the Vertex flange (SKU 4515); for material-specific requirements or certifications please request the technical data sheet from Metav Werkzeuge. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of fine-grained cast iron construction, high positional accuracy (0.05 mm) and compact dimensions for stable, repeatable set-ups. Order the prism block directly via Metav Werkzeuge or request a tailored technical quote from our consultants. V-3V Prism Block — fine-grained cast iron, 0.05 mm accuracy (Vertex) The V-3V Prism Block is a precision V-block designed to locate and support cylindrical workpieces during inspection and light machining tasks, offering stable seating and consistent reference points. Fine-grained cast iron construction High positional accuracy 0.05 mm Compact dimensions 35 x 76 x 61 mm Robust 1.5 kg mass for vibration damping Stable base material for consistent measurement results Made from fine-grained cast iron, the prism body provides a dense, vibration-damping platform that keeps the workpiece steady during manual inspection and measuring processes. The high material mass of 1.5 kg reduces chatter and improves contact stability, which directly benefits repeatability. The stated accuracy 0.05 mm indicates the manufacturing tolerance of the prism faces; in practice this precision helps to maintain concentricity and alignment when using a micrometer, dial gauge or a precision caliper for comparative checks. Accurate locating that speeds up setup and inspection The V-shaped seat positions round parts securely, reducing the need for clamps in many measurement applications. This reliable locating reduces setup time and lowers cycle variation, supporting higher throughput in quality-control routines. The compact footprint (35 x 76 x 61 mm) makes the unit easy to integrate on inspection plates or inside machine fixtures, while the prism geometry supplies defined contact lines for quick reference measurements and straightforward visual alignment. Robust design for long service life and workshop integration A simple, robust design means fewer wear points and less maintenance over time; the prism block’s material choice and mass combine to withstand everyday workshop handling. The durable construction from Vertex ensures component longevity while preserving dimensional integrity. Traceability is supported by the visible SKU and GTIN markings, enabling organised inventory and clear identification in procurement and inspection logs. Request a technical quote from Metav Werkzeuge in Emmerich for the Vertex V-3V prism block; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific measuring or fixture requirements Technical data Article number: V-3V GTIN: 4061905094637 Manufacturer: Vertex Facts Dimensions: 35 x 76 x 61 mm Accuracy: 0.05 mm Weight: 1.5 kg ECLASS: 21160304 Materials & special features Material: fine-grained cast iron Product type: prism block / V-block Brand: Vertex FAQ What is the primary use of this prism block? The V-3V prism block is used to locate and support cylindrical components during inspection and light machining operations, providing defined contact lines for reference measurements. What precision can be expected from the V-3V? The V-3V from Vertex is manufactured to an accuracy of 0.05 mm, which ensures repeatable seating and alignment for comparative measuring tasks. Is the prism block suitable for use on an inspection plate? Yes, the compact dimensions (35 x 76 x 61 mm) and stable fine-grained cast iron construction make the V-3V suitable for mounting or use directly on inspection plates and fixtures. How does the mass of the unit affect performance? The 1.5 kg mass of the prism block increases vibration damping and improves stability during measurement, which enhances repeatability and reduces measurement scatter. Can the V-3V be used with a precision caliper or micrometer? The V-3V is compatible with handheld and bench measuring tools such as a precision caliper or micrometer for comparative checks and simple dimensional controls. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, high-speed solution that combines 3500 rpm performance with durable square tungsten carbide inserts for reliable chamfering on ferrous parts; order the machine via Metav Werkzeuge or consult Metav's advisors for configuration and delivery. VCF-700 Chamfering and Deburring Machine — 3500 rpm, tungsten carbide inserts (Vertex) The VCF-700 is a compact chamfering and deburring machine designed for precise edge preparation and burr removal on steel and cast iron workpieces in workshop and small-production environments. Square tungsten carbide inserts 12.7×12.7 mm 3500 rpm spindle for fast processing Compact footprint 360×200×260 mm Designed for steel and cast iron Faster chamfers with consistent finish and predictable cycle times The combination of a high-speed spindle and robust cutting geometry delivers efficient edge preparation on ferrous components. The 3500 rpm spindle reduces cycle times while maintaining a controlled cutting action, which helps to preserve tolerances during secondary operations. For shops seeking repeatable results, the machine's stable cutter mounting and indexable inserts ensure a uniform chamfer profile across batches, reducing rework and downstream inspection time. Small footprint, multiple electrical options for flexible placement With a compact footprint of 360×200×260 mm and a net weight of 14 kg, the unit is suitable for bench mounting or integration into confined production cells. Electrical compatibility with single- and three-phase supplies (single-phase 110/220 V 50/60 Hz; three-phase 220 V or 380/415 V) allows installation in varied workshop infrastructures without complex electrical conversion, supporting quick commissioning and relocation when production layouts change. Durable cutting system that simplifies maintenance The machine is supplied with indexable inserts SPMN 120308 and uses square tungsten carbide cutters (12.7 × 12.7 × 3 mm, ISO 1203 SPUN), which combine wear resistance with easy indexation. Replacing a worn edge is a straightforward task, limiting downtime and lowering per-part tooling cost. The insert system also facilitates predictable tool life monitoring, so tool changes can be scheduled rather than reactive, improving overall equipment effectiveness. Engineered for ferrous materials and robust shop use The VCF-700 is optimised for steel and cast iron, delivering clean chamfers and reliable burr removal on parts where edge integrity is critical. The cutter geometry and insert choice provide good heat resistance and chip control when tackling tougher, abrasive surfaces. For users upgrading from manual deburring, the machine offers a measurable improvement in throughput and a more uniform surface state ahead of finishing or coating operations. Contact Metav Werkzeuge for tailored application advice or to arrange supply of the Vertex VCF-700; Metav's Emmerich-based team can advise on electrical configuration, delivery and integration — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCF-700 GTIN: 4061905090066 Weight: 14 kg Dimensions: 360×200×260 mm Core specifications Spindle speed: 3500 rpm Power supply options: single-phase 110/220 V 50/60 Hz; three-phase 220 V; three-phase 380/415 V Included accessories: indexable inserts SPMN 120308 Features and materials Square tungsten carbide inserts 12.7×12.7×3 mm, ISO 1203 SPUN Suitable for steel and cast iron Brand: Vertex SKU: VCF-700 FAQ What materials can be machined with this unit? The VCF-700 chamfering and deburring machine from Vertex is designed for ferrous materials, in particular steel and cast iron, providing reliable edge preparation for these substrates. Which cutter system is supplied with the machine? The machine is supplied with indexable inserts SPMN 120308 and accepts square tungsten carbide inserts (12.7×12.7×3 mm, ISO 1203 SPUN) for straightforward replacement and consistent cutting performance. What spindle speed does the VCF-700 operate at? The VCF-700 operates at 3500 rpm, a speed selected to balance efficient material removal with controlled surface finish for chamfering and deburring tasks. Is the unit suitable for small workshops or mobile use? Yes, the compact dimensions and 14 kg weight make the VCF-700 appropriate for bench installation or relocation within small workshops and service environments. Which electrical configurations are supported? Vertex supplies the VCF-700 with multiple supply options: single-phase 110/220 V (50/60 Hz) and three-phase 220 V or 380/415 V, enabling flexible installation according to local power availability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable workshop illumination with a wide beam and precise positioning: the combination of 20 W halogen output, a 500 mm arm and IP20 protection ensures steady, shadow‑reduced lighting for inspection and assembly. Order the VHL-50FT directly via Metav Werkzeuge or consult our technical advisers for application guidance. VHL-50FT – Vertex workshop lamp, 20 W halogen, 500 mm arm The VHL-50FT is a compact workshop lamp with a wide 36° beam, designed to provide consistent, high‑contrast illumination for inspection, fine assembly and bench work in indoor workshop environments. 20 W halogen illumination Wide 36° beam angle 500 mm adjustable arm IP20 protection for indoor use Consistent, high‑contrast illumination for inspection and testing The lamp uses a halogen light source at 20 W, offering a continuous spectral output that supports accurate visual inspection and colour judgement where precise detail matters. The wide 36° beam reduces deep shadows and provides an even light field across small assemblies and measuring setups. For quality control and assembly benches, this translates into fewer visual errors and a more efficient inspection process, since parts and markings remain clearly visible under steady, non‑flickering light. Accurate positioning and ergonomic handling for repetitive tasks An articulated mounting arrangement with a 500 mm arm allows careful positioning of the light over the workpiece, improving task ergonomics and repeatability in production routines. At a compact mass of 1.69 kg, the unit remains easy to move and re‑aim while maintaining stability once set. The lamp operates from AC 220 V, matching standard workshop supplies and integrating smoothly into existing benches and test rigs without additional power conditioning. Built for workshop continuity and dependable sourcing Designed for indoor workshop use with IP20 ingress protection, the device is intended to provide reliable service in controlled environments such as inspection benches, electronics assembly and precision tooling areas. Supplied under the Vertex name, the VHL‑50FT benefits from established manufacturing practices and can be procured through Metav as a trusted European distribution partner. Metav’s logistical presence in Emmerich supports consistent availability and application advice, helping to keep production lines and inspection stations running with minimal downtime. Contact Metav Werkzeuge for tailored application advice or to arrange delivery of the Vertex VHL-50FT from our Emmerich warehouse Technical Data Article number: VHL-50FT GTIN: 4061905084560 Brand: Vertex Facts Weight: 1.69 kg Arm length: 500 mm Beam angle: 36° Light power: 20 W (halogen) Light temperature: 28000 K Supply voltage: AC 220 V Special features Halogen light source Wide beam for reduced shadowing IP20 protection — indoor use Compact, bench‑oriented design FAQ What type of light source does this lamp use? The VHL-50FT uses a 20 W halogen lamp, chosen for its continuous spectrum and consistent output for inspection tasks. Is the VHL-50FT suitable for outdoor or wet environments? No. The lamp has IP20 protection, which is intended for indoor workshop use and does not provide protection against water ingress. How far can the lamp be positioned from the workpiece? Positioning is supported by a 500 mm arm that allows precise placement over the work area; the VHL-50FT’s reach is intended for benches and close inspection setups. What supply voltage is required for this unit? The device operates on AC 220 V, compatible with standard workshop mains. Which applications benefit most from this lamp? Inspection, fine assembly and detailed bench work in workshops and production cells benefit from the VHL-50FT’s wide beam and consistent halogen illumination. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from the combination of a wide 45° beam, 3 W LED efficiency and IP54 protection for dependable workshop illumination and low running costs; order directly via Metav Werkzeuge or consult our advisors for tailored advice. VHL-37FT workshop lamp — wide-beam, energy-efficient illumination (Vertex) The VHL-37FT is a compact workshop lamp designed for broad-area task lighting; it combines a low-power LED source with a flexible mounting arm for organised, glare‑reduced workspaces. 3 W LED for energy-efficient illumination Wide 45° beam for broad coverage IP54 splash and dust resistance Flexible 370 mm arm, lightweight 0.6 kg Precise, low-power lighting that supports inspection and assembly The fixture uses a 3 W LED light source to deliver focused task illumination while keeping power consumption to a minimum. The very high 57,000 K light temperature produces a cool, high‑contrast appearance that makes fine details stand out during visual inspection and assembly tasks. The wide 45° beam distributes light evenly across benches or workstations, reducing the need for frequent repositioning and improving productivity during repetitive tasks. Built‑in LED technology also means low maintenance and a long service life compared with filament lamps, which supports continuous operation in production environments. Robust design for workshop conditions and flexible positioning Designed for practical workshop use, the lamp offers IP54 protection, which signifies reliable resistance to dust ingress and splashing water—suitable for environments with occasional coolant or cleaning spray. The articulated 370 mm arm enables precise positioning over the work area, while the unit’s 0.6 kg weight keeps the assembly lightweight and easy to mount where space is limited. The wide voltage acceptance of AC 100V–240V allows the lamp to be used with standard mains supplies across different sites without specialised transformers or adapters, facilitating quick integration into existing setups. Practical advantages that reduce downtime and support quality work The combination of a compact LED head, robust protection class and flexible arm reduces setup time and the frequency of lamp replacement, contributing to uninterrupted workflows. The lamp’s characteristics favour tasks requiring sustained visual focus such as measurement, component inspection and small-part assembly; the LED light maintains consistent output without warm‑up delay. Distribution through Metav Werkzeuge ensures availability via a European quality filter and dependable logistics, so workshop planners and purchasing departments can rely on consistent supply and transparent order handling. Contact Metav Werkzeuge in Emmerich for a procurement consultation or to discuss how the Vertex VHL-37FT can be integrated into existing workstations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: VHL-37FT GTIN: 4061905088209 Manufacturer: Vertex Key specifications Power: 3 W (LED) Light temperature: 57,000 K Beam angle: 45° Arm length: 370 mm Weight: 0.6 kg Supply voltage: AC 100V–240V IP rating: IP54 Materials and features Wide light beam for broad coverage Splash and dust resistant (IP54) Lightweight, flexible arm for positioning FAQ Is the VHL-37FT suitable for use in damp workshop environments? The VHL-37FT has an IP54 rating, which provides protection against dust and splashing water and makes it suitable for typical workshop conditions where occasional splashes occur, but it is not intended for continuous outdoor exposure in heavy rain. What are the electrical requirements for the lamp? The lamp accepts AC 100V–240V, enabling operation from standard mains supplies without additional voltage conversion equipment. What kind of light does the fixture produce and how does it affect visibility? With a 3 W LED and a high colour temperature of 57,000 K, the light is very cool and high in contrast, aiding the visual detection of fine details during inspection and assembly operations. How easy is it to position the light over the workpiece? The lamp features a 370 mm articulated arm and a wide 45° beam, which together allow comfortable, precise positioning to illuminate benches, jigs or inspection areas. What is the weight of the unit and does it require heavy mounting hardware? The unit weighs 0.6 kg, making it lightweight and straightforward to position; specific mounting accessories are not detailed in the product data. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of durable rubber construction and an expandable design to protect machine openings and rear-mounted measuring tools while keeping installation simple and load minimal. Benefit from compact dimensions (370 x 750 mm) and a lightweight 0.7 kg body for easy retrofitting on existing equipment. Order the machine guard directly via Metav Werkzeuge or ask our consultants if needed. Machine Guard VGC-3775B – expandable rubber protection, 370 x 750 mm by Vertex A Machine Guard VGC-3775B is an expandable rubber protector designed to shield machine openings and rear-mounted calipers in workshop and industrial production environments. Expandable design for adjustable coverage Durable rubber construction for abrasion resistance Fits 370 x 750 mm openings Rear-side mounting for precision calipers Compact protection that keeps production running The VGC-3775B delivers targeted protection where space is limited: its expandable form adapts to variable gaps while the rubber material absorbs chips and dust without transferring damaging forces to adjacent components. The measured dimensions 370 x 750 mm make the guard suitable for a wide range of machine flanges and access points, and the low weight (0.7 kg) reduces additional load on sliding elements. This combination of compact size and resilient material supports continuous operation by limiting contamination and wear on sensitive surfaces, which in turn contributes to predictable maintenance intervals and reduced downtime. Designed for precision and safe integration Rear-side mounting is provided to accommodate precision calipers and similar indicators without obstructing measurement tasks. The guard’s profile enables secure attachment to machine frames, maintaining necessary clearances for measuring instruments while preventing ingress of swarf and coolant. Where compatibility with measuring equipment is required, the expandable layout ensures the protective element conforms to the geometry of the machine interface, allowing measurement routines to continue with minimal intervention. The straightforward mechanical concept avoids complex fittings and supports consistent measurement conditions. Low-maintenance fit for workshop workflows The choice of rubber as the primary material allows straightforward cleaning and long-term resistance to abrasion from typical workshop debris. Installation is intentionally simple, so retrofitting to existing machines is feasible without extended downtime. Inspection and upkeep are confined to routine checks and occasional cleaning, which keeps lifecycle costs low and preserves machine availability. The guard’s adaptable design also minimises the need for multiple part variants, simplifying spare-part management and inventory control for maintenance teams. A reliable component from established partners Specified and supplied by Vertex, this machine guard aligns with the practical demands of industrial operations and precision workshops. As part of a considered equipment strategy, the guard supports the democratisation of precision by protecting measurement setups and machine openings, enabling consistent quality in daily production. Metav Werkzeuge acts as the local supply and advisory point in Europe, providing a quality filter and logistical proximity for procurement and technical guidance. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex Machine Guard VGC-3775B, including compatibility checks and delivery options; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VGC-3775B GTIN: 4061905091346 Manufacturer: Vertex Core specifications Dimensions: 370 x 750 mm Weight: 0.7 kg Materials & features Material: Rubber Expandable design Rear-side mount for precision calipers ECLASS: 24322502 FAQ What material is the guard made from? The Machine Guard VGC-3775B is manufactured from rubber, chosen for flexibility and abrasion resistance suitable for workshop environments. Can the guard be used with precision calipers? Yes. The VGC-3775B supports rear-side mounting to accommodate precision calipers and similar measuring devices without impeding access. What are the dimensions and weight of the guard? Dimensions are 370 x 750 mm and the unit weighs 0.7 kg, allowing compact installation with minimal added load. Is the design adjustable to different gap sizes? The guard features an expandable design that adapts to varying opening sizes, providing coverage across a range of machine interfaces. Who supplies this machine guard? This machine guard is supplied by Vertex and distributed via Metav Werkzeuge; the item is listed under SKU VGC-3775B. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust, heavy base that improves machining stability and reduces rework: the combination of stable mounting, substantial mass and clear dimensions supports consistent production quality. Order the HS-8 base directly via Metav Werkzeuge or consult our product advisors for integration guidance. HS-8 — Base for Vertex VHT vises, stable mounting platform (373 x 355 x 45 mm) A base for Vertex VHT vises (HS-8) designed to provide a rigid, vibration-damping mounting surface for bench vises in workshop and light industrial settings. Stable mounting for Vertex VHT vises Dimensions 373 x 355 x 45 mm 16 kg mass for vibration damping Suited to standard workshop benches Precision immobility for machining tasks A heavy, stable foundation reduces unwanted movement during clamping and machining. The substantial 16 kg mass provides effective vibration damping, which directly benefits surface finish and repeatability when using a bench vise. By stabilising the clamped workpiece, tool wear is reduced and cycle-to-cycle variation is minimised, enabling more consistent results on finishing and measuring operations. This base is therefore a practical measure to increase process reliability on small-batch or bespoke assemblies. Clear specification for straightforward integration The clearly stated dimensions of 373 x 355 x 45 mm allow rapid assessment of bench space and mounting compatibility. The compact footprint suits typical workshop benches while offering enough surface area for secure attachment of a bench vise. Designed specifically for the Vertex VHT series, the base streamlines installation and avoids the need for custom adapters, which shortens setup time and simplifies machine layout planning in production cells or repair benches. Improved productivity through reduced rework Greater stability during clamping lowers the incidence of chatter and misalignment, so fewer parts require rework or adjustment. The resulting improvement in first-pass quality translates into saved labour hours and fewer interrupted workflows. In practical terms, investing in a robust mounting base contributes to steady throughput and predictable manufacturing outcomes, supporting tighter tolerances without introducing complex process changes. Proven supply and workshop readiness The HS-8 base is provided through a supplier network that emphasises dependable delivery and consistent product standards. Metav Werkzeuge acts as a quality filter for the European market, combining long-standing expertise with a broad product range to keep workshops supplied. With a portfolio built to serve industry, craft and trade, the emphasis is on practical, verifiable solutions that fit into established workshop routines and procurement channels. Contact Metav Werkzeuge to discuss the HS-8 base for Vertex VHT vises and arrange delivery or technical clarification from our specialists in Emmerich Technical Data Article number: HS-8 GTIN: 4061905092909 ECLASS: 21029106 Facts Dimensions: 373 x 355 x 45 mm Weight: 16 kg Special features For Vertex VHT vises SKU: HS-8 FAQ What is the primary purpose of this base? The HS-8 base for Vertex VHT vises provides a rigid, vibration-damping mounting surface to improve clamping stability and machining repeatability. Are the exact mounting holes and pattern specified? Mounting hole details are not specified in the provided product data for the HS-8 base; refer to the technical drawing or supplier documentation for hole pattern information. What material is the base made from? The material is not indicated in the available product data for the HS-8 base for Vertex VHT vises. Can the base be used with other bench vises? The HS-8 is designed for Vertex VHT vises; compatibility with other bench vises depends on the alternative vise’s mounting pattern and foot dimensions. How does the base contribute to machining accuracy? By adding mass and a flat, stable surface, the HS-8 base reduces vibration and movement during clamping, which improves surface finish and repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust carbon steel construction paired with a 375 mm length ensures dependable reach and impact for alignment and removal tasks; its 1.3 kg mass provides controlled handling for repetitive use. Order the tool directly via Metav Werkzeuge or consult our advisors for application-specific advice. Hand Drift VHD-1 — Vertex manual drift punch, carbon steel, 375 mm The Hand Drift is a manual drift punch designed for precise alignment, pin removal and light demolition tasks in workshop, maintenance and assembly environments. Carbon steel construction for tough conditions 375 mm length for extended reach and leverage 1.3 kg weight for balanced manual control SKU VHD-1 for easy identification and reorders Dependable performance for precise alignment and drift work Built for repeatable results, this manual punch combines carbon steel robustness with a design that supports controlled impact work. The heavier head and longer shaft give steady momentum, reducing the number of strikes needed to shift pins or loosen fitted parts. As a consequence, workshop throughput improves because fewer corrective operations are required, and wear on adjacent components is minimised. The tool’s straightforward form means maintenance is limited to routine inspection, supporting continuity in production and repair tasks. Practical length and weight that improve accessibility and control A 375 mm overall length delivers extended reach into confined assemblies and behind structural components where shorter tools cannot access. The tool’s 1.3 kg mass is balanced to offer both driving force and tactile control, enabling accurate strikes without excessive fatigue during repeated use. For technicians working on fixtures, frames or maintenance jobs, this combination of reach and handling reduces the need for awkward positioning or additional aids, speeding up task completion while maintaining safe working postures. Lower downtime through rugged materials and clear identification Constructed from carbon steel, the tool resists deformation under impact and retains shape over prolonged use, translating into fewer replacements and lower indirect costs. Clear labelling with SKU VHD-1 and manufacturer details simplifies inventory management and reorder processes, helping workshops keep necessary spares at hand. The tool’s simple geometry also means compatibility with existing hammers and holders, avoiding investment in special accessories. Reliability in everyday tasks supports steady workflow and predictable maintenance planning. Contact Metav Werkzeuge to discuss the Vertex Hand Drift VHD-1 and confirm suitability for specific workshop applications; our consultants are available to advise on integration into existing toolsets. Technical data Article number: VHD-1 GTIN: 4061905084195 Manufacturer: Vertex Material: Carbon steel Length: 375 mm Weight: 1.3 kg Facts 375 mm 1.3 kg eClass: 21040790 GTIN: 4061905084195 Special features Manual drift punch Carbon steel construction Vertex brand SKU VHD-1 FAQ What tasks is this drift punch suitable for? The Hand Drift VHD-1 from Vertex is intended for alignment, pin removal and light impact tasks in workshops and maintenance operations. Is the material suitable for heavy-duty use? Yes, the carbon steel construction of the Hand Drift VHD-1 provides the durability required for repeated impact work in industrial and workshop settings. How does the 375 mm length help in practical use? The 375 mm length increases reach into tight assemblies and improves leverage, allowing technicians to work in confined or hard-to-access areas without repositioning large components. Can the tool be identified easily for reordering? The tool carries SKU VHD-1 and GTIN 4061905084195 for straightforward inventory management and replenishment of Vertex drift punches. Is the weight appropriate for repetitive tasks? With a weight of 1.3 kg, the Hand Drift VHD-1 balances driving force and user control to reduce fatigue during repetitive striking operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a combination of robust, dustproof design and reliable halogen illumination to keep inspection and machining stations consistently lit; the compact 380 mm arm and dual-voltage compatibility ensure fast integration into existing setups. Order the device directly via Metav Werkzeuge or consult the Metav team for tailored advice. VHL-600FT Dustproof Halogen Work Lamp (380 mm arm) by Vertex the VHL-600FT is a dustproof halogen work lamp designed for precise inspection and focused task lighting in workshops and industrial environments Vertex VHL-600FT halogen 12V/20W lamp Dustproof construction for workshop use 380 mm adjustable arm for focused illumination Steady, high-contrast illumination for precision work The halogen light module rated 12V/20W delivers a consistent beam with good contrast, making scratches, burrs and surface irregularities easier to spot during inspection and assembly tasks. Unlike LEDs that can shift tone with ageing, the halogen source provides stable colour rendering over typical service intervals; this supports reliable visual checks and reduces the need for repeated inspections. The specification of the light is clear and verifiable, supporting efficiency in quality control processes. Built to withstand workshop conditions while remaining manoeuvrable A dustproof housing keeps the optical system free from particulate ingress in busy shop environments, extending service life and reducing maintenance intervals. The articulated 380 mm arm permits precise positioning above fixtures or workpieces, enabling operators to direct light exactly where needed without risking shadowing. At 1.7 kg, the unit balances portability with stability, allowing relocation between benches or machines while maintaining a robust mounting for repeatable alignment. Simple electrical compatibility and low-complexity upkeep With 110V/220V input compatibility the lamp integrates with common supply systems across facilities, minimising the need for additional transformers or adapters. The design focuses on straightforward replacement of consumables and uncomplicated installation, so downtime for upkeep is kept to a minimum and productivity remains high. As a Vertex product assembled to industry expectations, the lamp pairs straightforward operation with dependable performance for routine inspection and maintenance tasks. Contact Metav Werkzeuge in Emmerich for specification advice and fast, reliable supply of the VHL-600FT; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance and order coordination Technical Data Article number: VHL-600FT GTIN: 4061905084065 Weight: 1.7 kg Arm length: 380 mm Light: 12V/20W Power: 110V/220V Facts Weight: 1.7 kg Arm: 380 mm Power input: 110V/220V Lamp rating: 12V/20W Special features Dustproof housing Halogen light source Brand: Vertex SKU: VHL-600FT FAQ What type of light source does this work lamp use? The VHL-600FT uses a halogen light module rated at 12V/20W, chosen for steady output and consistent colour rendering during inspection tasks. Is the lamp suitable for dirty or dusty workshop environments? Yes, the lamp features a dustproof housing intended to reduce particulate ingress and to prolong reliable operation in workshop conditions. How is the lamp positioned over the workpiece? The articulated 380 mm arm provides accurate adjustment for focused illumination and repeatable positioning above benches or machines. Which voltages are supported by the lamp? The unit accepts 110V and 220V supplies, enabling straightforward integration into most industrial and workshop electrical systems. What is the manufacturer and where is the lamp made? The VHL-600FT is supplied by Vertex and carries the company’s product designation and SKU for identification in procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining self-centring 3-jaw clamping, a nominal 380 mm gripping diameter and a robust, high-mass design delivers secure, repeatable workholding for heavy turning tasks. Order the VSK-15A directly via Metav Werkzeuge or consult the Metav advisors for application-specific guidance and mounting recommendations. VSK-15A — 3-jaw self-centring reversible chuck (380 mm) A VSK-15A chuck engineered for secure, repeatable workholding in heavy-duty turning and versatile internal/external clamping applications. Self-centring 3-jaw operation Reversible function for inside/outside clamping 380 mm nominal diameter Stable mass, 64.7 kg for reduced vibration Reliable heavy-duty clamping for machining accuracy The self-centring three-jaw layout provides rapid, repeatable clamping that reduces setup time and helps maintain concentricity across serial workpieces. With a nominal 380 mm diameter, the chuck suits larger components while the high mass contributes to stability during cutting, lowering the risk of chatter. The result is consistent part quality and fewer reworks thanks to precise axial alignment and repeatability. Flexible mounting and internal/external clamping capability A reversible jaw design allows safe transition between external gripping and internal gripping operations without changing major fixtures, supporting a wider range of turning tasks. Mounting is provided via a three-point thread pattern (3xM16) that simplifies integration with standard lathe mounting plates and fixtures. The chuck’s 156.5 mm height and substantial 64.7 kg weight contribute to a low centre of gravity and improved holding force translation from spindle to workpiece. Durable construction and easy identification for procurement Built for workshop longevity, the clamping unit combines a compact profile with a robust mass to withstand continuous use in industrial environments. Minimal moving-part complexity reduces routine maintenance needs, while the clear product identifiers aid ordering and inventory: SKU VSK-15A and GTIN 4061905091612. As a component designed for reliable, long-term operation, the chuck supports higher throughput and stable process capability when paired with correct mounting and machining parameters. Contact Metav Werkzeuge for tailored advice on Vertex workholding and to request the VSK-15A specification sheet and mounting guidance directly from our Emmerich quality team Technical data Article number: VSK-15A GTIN: 4061905091612 Manufacturer: Vertex Facts Diameter: 380 mm Height: 156.5 mm Weight: 64.7 kg Thread: 3xM16 ECLASS: 21020590 Design & features Self-centring 3-jaw chuck Reversible operation for inside and outside clamping Suitable for heavy-duty turning applications FAQ What is the nominal diameter of the chuck? The chuck has a nominal gripping diameter of 380 mm, suitable for larger turning components. Can the chuck be used for both external and internal clamping? Yes, the reversible jaw arrangement enables both external gripping and internal clamping without major fixture changes. How is the chuck mounted to the spindle or backplate? Mounting is provided via three M16 threaded fixings (3xM16) to integrate with common lathe backplates and mounting interfaces. What does the chuck’s mass mean for machining performance? At 64.7 kg, the elevated mass improves stability and vibration damping during cutting, which supports higher surface quality and process stability. Which product identifiers should be used when ordering? Refer to SKU VSK-15A and GTIN 4061905091612 for procurement and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, expandable guard that protects measuring areas while keeping installation time and weight to a minimum; the combination of a 380 x 330 mm footprint, expandable configuration and lightweight construction supports smoother inspection workflows. Order the unit directly via Metav Werkzeuge or consult the team for application advice. VGC-3833F – Vertex machine guard with expandable panel and compact footprint A VGC-3833F machine guard designed for small machine tools and measuring stations, providing adaptable protection and front-side precision caliper access in confined workspaces. *Compact 380 × 330 mm footprint *Expandable, modular panel design *Front-side precision caliper compatibility *Lightweight at 0.3 kg for easy handling Secure protection tailored to compact workstations The guard delivers efficient area protection while conserving valuable bench or machine space. With a compact profile of 380 x 330 mm, the unit limits intrusion into the working envelope yet provides a defined barrier that reduces contamination and accidental contact with sensitive measuring setups. The design supports front access for a front-side precision caliper, so measuring tasks remain straightforward without repeated repositioning of parts. By reducing interruptions and minimising tool handling, the guard contributes to steadier throughput and fewer measurement errors. Flexible expansion to match changing production needs Built to grow with workshop requirements, the device features an expandable concept that accommodates additional panels or extensions without replacing the entire assembly. This modular approach allows integration into evolving jigs and fixtures, making it suitable for pilot runs as well as scaled production. The adaptable construction helps avoid repeated capital expenditure when layouts change and keeps downtime low during reconfiguration. For applications where layout flexibility and rapid adaptation are priorities, this guard offers a pragmatic balance between protection and scalability. Fast fitting and low handling effort for smoother workflows Weighing only 0.3 kg, the guard is easy to manoeuvre and align during installation, cutting assembly time and simplifying routine adjustments. The lightweight nature does not compromise functional stability for everyday metrology and inspection tasks, and the accessible front opening maintains direct visibility of measuring instruments. This combination of lightweight handling and straightforward integration supports faster cycle changeovers and more consistent measurement routines, improving overall operational efficiency. Choose Vertex’s adaptable VGC-3833F machine guard for reliable, space-efficient protection and contact Metav Werkzeuge for tailored advice and ordering: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VGC-3833F GTIN: 4061905083938 Category: Vertex Facts Dimensions: 380 x 330 mm Weight: 0.3 kg EClass: 24322502 Special features Expandable design Front-side precision caliper compatibility Suitable for compact machine tools and measuring stations FAQ What materials is the guard made from? The product data does not specify the material; for material details contact Metav Werkzeuge or the manufacturer. Can the guard be extended to cover larger machines? Yes, the expandable concept allows modular extensions so the guard can be adapted for larger setups. Is the guard compatible with precision calipers? The unit is designed for front-side precision caliper access, enabling direct measurement without repositioning workpieces. How quickly can the guard be integrated into an existing workstation? The lightweight construction and compact format support rapid fitting and alignment, reducing integration time. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the expandable design and compact footprint combined with a lightweight construction to add flexible protection without compromising machine access; order the unit directly via Metav Werkzeuge or contact our consultants for tailored advice. VGC-3860F Vertex machine guard — expandable protective panel, compact 380×600 mm The VGC-3860F is an expandable protective guard designed for workshop machinery, offering space-saving shielding and an integrated front mount for storing precision calipers. Expandable machine guard Compact footprint 380x600 mm Front mount for precision calipers Lightweight at approx. 0.6 kg Space-efficient protection that adapts to the workstation The expandable construction of this protective panel provides a practical solution where floor and bench space are limited. With overall dimensions of 380×600 mm, the unit fits tight work cells and can be adjusted to cover varying machine openings, reducing the need for bespoke enclosures. The combination of compact size and portability supports flexible production layouts and simplifies repositioning between machines, while the modest 0.6 kg weight makes handling and retrofitting straightforward for maintenance staff. This saves time during changeovers and supports continuous workflow efficiency. Integrated storage and organised tool access for precision tasks A dedicated front mount for precision calipers integrates measuring tool storage directly into the protective barrier, keeping verniers and electronic callipers protected yet immediately accessible. By combining storage with shielding, the design minimises misplaced tools and reduces interruption during inspection or set-up routines. The arrangement supports consistent measuring practice in the workshop and contributes to faster set-up times, which in turn enhances throughput and reduces the risk of measurement-related rework. Practical durability and simple upkeep to keep operations running The unit’s straightforward construction focuses on operational reliability and low maintenance. The modular nature of the guard permits quick cleaning and simple replacement should any part become worn, limiting downtime. As a lightweight, adaptable panel, it complements modular workstations and small machine tools, offering a balance between operator protection and access for adjustment or part handling. The design supports safe, efficient operations while fitting into established workshop processes. For reliable, space-saving machine protection from Vertex choose the VGC-3860F via Metav Werkzeuge — contact our Emmerich team for application advice and procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VGC-3860F GTIN: 4061905089053 Name: Machine guard Facts Dimensions: 380x600 mm Weight: 0.6 kg eClass: 24322502 Special features Expandable design Front mount suitable for precision calipers Brand: Vertex FAQ What size of machine opening does the guard cover? The VGC-3860F is specified at 380×600 mm and is intended to provide compact coverage for small to medium openings on workshop machines. Can precision calipers be stored on the unit? Yes, the guard features a front mount designed for precision calipers so measuring instruments remain accessible and protected. Is the guard easy to move between machines? Designed to be lightweight at approximately 0.6 kg, the VGC-3860F is simple to reposition for flexible workshop layouts. Does the unit require specialist maintenance? Routine upkeep is minimal; the VGC-3860F has a straightforward construction allowing simple cleaning and part replacement as needed. Who manufactures the guard and which model should be ordered? The guard is manufactured by Vertex; order the VGC-3860F model for a compact, expandable protective solution. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take reliable, precise height adjustment together with a compact footprint and 30 kg capacity to simplify fixture set-up and maintenance. Benefit from a robust screw-driven mechanism and light weight that ease handling while maintaining accuracy. Order the screw jack directly via Metav Werkzeuge or request a technical consultation. VSJ-70 Screw Jack by Vertex — Adjustable 65–90 mm, 30 kg capacity The VSJ-70 is a compact screw jack designed for precise height adjustment in workshop fixtures and small lifting applications, offering stepless height control and dependable load handling. Adjustable height 65–90 mm 30 kg load capacity Compact, lightweight 0.4 kg Robust screw-driven mechanism Precise height control for accurate fixture alignment The screw-driven design provides stepless height adjustment, enabling fine positional control where millimetre accuracy matters. With an adjustable height range of 65–90 mm, the device supports incremental alignment tasks and repeatable set-up procedures without the need for shims or makeshift solutions. The mechanical screw principle converts small rotary inputs into reliable linear movement, reducing play and enabling consistent calibration of jigs and small assemblies. This makes the unit particularly suited to tasks where fixture height must be set quickly and retained under load. Space-saving strength that supports workflow efficiency Despite a nominal mass of only 0.4 kg, the component handles a rated load of 30 kg, combining portability with practical load performance. The low weight and compact diameter (38 mm) allow integration in close-packed assemblies and mobile tool trolleys, freeing bench space and simplifying handling during changeovers. The compact footprint lowers the time spent on repositioning or storage, improving throughput in small-batch production and repair work. The geometry also reduces interference with adjacent tooling, which helps maintain workflow continuity on crowded benches. Integration, durability and predictable maintenance intervals Built for workshop use, the lifting screw delivers a robust, low-maintenance operation: the simple mechanical design minimises potential failure points and simplifies preventive checks. The unit is compatible with standard workshop environments and can be incorporated into fixture plates, jigs or small lifting arrangements without extensive modification. Reliability reduces downtime and supports predictable process planning — benefits that scale across repetitive tasks in trade and light industrial settings. For any specific installation questions or to check compatibility with existing fixtures, technical advice is available from Metav’s consultants. Contact Metav Werkzeuge in Emmerich for tailored advice and supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the VSJ-70 and integration options Technical data Article number: VSJ-70 GTIN: 4061905091582 Eclass: 21044290 Facts Weight: 0.4 kg Max load: 30 kg Diameter: 38 mm Adjustable height: 65–90 mm Special features Manufacturer: Vertex SKU: VSJ-70 Compact screw-driven lift unit FAQ What maximum load can the VSJ-70 support? The VSJ-70 screw jack from Vertex is rated for a maximum load of 30 kg, suitable for small lifting and fixture applications. How is height adjusted on this screw jack? Height is changed steplessly via the screw mechanism; the unit offers an adjustable height range of 65–90 mm for fine alignment. Is the device suitable for cramped or compact setups? Yes, the compact diameter (38 mm) and low weight (0.4 kg) allow integration into tight assemblies and crowded benches. Can this jack be used in repeated production cycles? The screw-driven design is built for durability and low maintenance, making it appropriate for repetitive set-ups and small-batch production tasks. Who manufactures the VSJ-70 and where is it supplied from? The unit is manufactured by Vertex; supply and technical consultation are provided via Metav Werkzeuge from Emmerich for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of compact dimensions and reliable fixture height control to streamline set-up times and improve repeatability on the shop floor; order the Step Block directly via Metav Werkzeuge or ask the consultants if additional technical information is needed. Step Block – Compact clamping step for precise height control, 38 × 140 × 86 mm by Vertex The Step Block is a compact clamping aid for precise fixture height adjustment and repeatable setup tasks in workshop and light production environments. Compact 38 × 140 × 86 mm format Precise step height for repeatable set-ups Robust design for workshop applications Faster, more reliable height setting for fixtures The Step Block offers a simple, mechanical solution for consistent fixture height control, reducing the need for iterative shimming and measurement. With clear, fixed step geometry, technicians achieve repeatability across repeated setups, shortening machine downtime and avoiding costly trial cuts. The compact footprint and clear geometry make it suitable for tight benches and multi-station arrangements, improving throughput without complex equipment. The emphasis on measurable, repeatable adjustment directly supports rational decision-making on the shop floor and promotes efficient process design. Practical compatibility with standard clamping systems Designed as a general-purpose clamping accessory, this step block integrates smoothly with common workshop vises, T-slot fixtures and modular clamping kits. The geometry supports firm contact and stable seating, so setups remain secure during machining cycles. As a low-complexity workholding element, it simplifies changeover procedures and complements existing clamping hardware, thereby enabling faster job changeovers and predictable results. The compact dimensions help when planning fixture layouts, allowing more flexible positioning within jigs and on machine tables. Clear benefits for both everyday and precision tasks Beyond immediate time savings, the block contributes to consistent quality control by standardising the starting height for inspection and machining operations. Repeatable setups reduce measurement variance and support downstream quality assurance. The straightforward design requires minimal training to deploy, making it suitable for both experienced machinists and apprentices. For procurement and workshop managers, the device delivers an accessible route to better process stability without extensive fixture redesign. For reliable, space‑saving clamping with Vertex quality, contact Metav Werkzeuge to discuss how the Step Block fits into existing fixtures or to request a tailored supply recommendation from our Emmerich-based specialists. Technical Data SKU: 5235 GTIN: 4061905093692 Manufacturer: Vertex Machinery Works Co., Ltd. Facts eCl@ss: 21170107 Dimensions: 38 × 140 × 86 mm Special features Product type: Step block Intended use: Fixture height adjustment and clamping aid Images available: technical drawing and detail photographs FAQ What is the primary purpose of this Step Block? The Step Block serves as a clamping aid to establish repeatable fixture heights and support consistent workpiece positioning during machining and inspection. What are the exact external dimensions? Dimensions are 38 × 140 × 86 mm. Is the block compatible with standard vices and T-slot fixtures? Yes, the geometry is intended to pair with common workshop clamping systems for stable seating and reliable setup. Which manufacturer produces this clamping accessory? The product is supplied by Vertex Machinery Works Co., Ltd.; the step block is listed under SKU 5235. Are visual references available for planning setups? Technical drawing and detailed photographs are provided to assist in fixture planning and integration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan