420 g Precision Balance Graphic LCD, 0.001 g Readability, 110 mm Stainless Steel Pan, 15 mm Digits, USB/Multiplug Adapters - KERN

Take advantage of reliable dust protection and light shielding to preserve measurement accuracy, with broad compatibility for KERN analytical and precision balances featuring a glass wind shield. Supplied as a practical pack of five, this cover supports smooth workflow and low-maintenance operation. Order directly via Metav Werkzeuge or consult our technical advisors for application guidance. Dust cover ABS-A08 – protective cover for analytical and precision balances by KERN The dust cover ABS-A08 is a protective cover designed for KERN analytical and precision balances with a glass wind shield, preventing contamination and ambient light interference during sensitive weighing tasks. Protects against dust and light Compatible with KERN analytical balances Designed for balances with glass wind shield Supplied as pack of 5 Preserve measurement integrity with simple protection A lightweight protective cover reduces the risk of sample contamination and measurement drift, supporting consistent measurement integrity in laboratories and production areas. Dust particles and stray light can alter readings on highly sensitive instruments; by placing a cover over the balance’s glass draft shield, settling particles are kept away from the weighing pan and reflective light is minimised. This results in fewer repeat measurements and less time spent on corrective cleaning, which translates into improved process efficiency and more reliable data for quality control. Fast fit for analytical and precision balances The cover is engineered to fit balances that incorporate a glass wind shield, enabling quick placement and removal during routine operations. Compatibility with a wide range of KERN models simplifies stocking decisions for procurement teams: one standard accessory supports multiple instruments. The supply in a pack of five is practical for facilities running several weighing stations or for replacing worn covers without delay. The design prioritises unobtrusive protection so that normal workflow—placing samples, adjusting weights and reading results—remains straightforward. Practical benefits for workshop and lab routines Using a protective cover supports the longevity of sensitive weighing equipment by reducing particulate ingress and light-induced reading anomalies. For teams focused on throughput and traceable results, the cover contributes to operational stability and reduces the frequency of maintenance interventions. The accessory is a cost-effective way to protect investment in precision equipment while helping to maintain the reproducibility required in analytical work and small-batch production. For tailored advice or to order the KERN dust cover ABS-A08 in practical multi-packs, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise guidance and reliable supply. Technical Data Article number: ABS SKU: ABS-A08 Manufacturer: KERN GTIN: 4045761163348 Country of origin: China Tariff number: 39269097 ECLASS: 24322502 Numbers Weight: 0.01 kg Pack quantity: 5 Special features Protects against dust and light Fits KERN analytical and precision balances with glass wind shield Supplied as pack of 5 FAQ Is this cover suitable for all KERN analytical balances? The dust cover ABS-A08 is compatible with KERN analytical and precision balances that feature a glass wind shield. How often should the cover be replaced? Replacement frequency depends on usage and contamination levels; the ABS-A08 is supplied as a pack of five to allow regular replacement when required. Can the cover be used with non-KERN balances? The design targets balances with a glass draft shield; fit with other brands depends on the specific dimensions and draft-shield configuration, so compatibility should be checked against the balance’s glass wind shield. Does the cover protect against light as well as dust? Yes, the cover shields samples from ambient light while also preventing dust settlement, both of which help to maintain stable readings. Is material information available for the cover? Material details are not specified in the provided product data Manufacturer: KERN — Address and contact details not provided in the product data

Take advantage of the combination of lightweight protection, straightforward compatibility and easy replacement to keep weighing stations clean and operational; order the accessory directly via Metav Werkzeuge or ask the consultants for detailed advice. Protective Hood PLJ-A01S05 – scale accessory for MPLS.420-3F, by KERN A Protective Hood PLJ-A01S05 designed as an accessory for MPLS.420-3F scales, offering simple protection against dust and incidental splashes during routine weighing and handling. Protective hood for MPLS.420-3F scales Supplied as a five-piece set Extremely lightweight at 0.03 kg Extend the service life of weighing equipment with minimal effort The protective hood acts as a practical barrier that reduces contamination of the weighing area and associated components, helping to preserve calibration intervals and reduce cleaning effort. As an accessory specifically matched to the MPLS.420-3F series, the cover provides straightforward compatibility with the relevant enclosure geometry, enabling faster installation and removal. The lightweight construction contributes negligible bulk while offering a visible improvement in day‑to‑day cleanliness, which supports consistent measurement quality and lowers indirect maintenance costs. Keep workflows efficient with ready replacements Supplied as a set, the covers allow for quick rotation and replacement during scheduled cleaning or when wear is observed, minimising downtime in production and laboratory routines. The option to replace a single item from the set ensures continuity of operation while spare pieces are sanitised or stored. This practical supply approach supports continuous throughput in busy environments, where simple consumables must not interrupt process flow or shift productivity. Simple storage and handling for busy environments The compact form and low weight make the covers easy to store near the weighing station without occupying valuable bench space. Their manageable size reduces handling time during changeovers and keeps ancillary tasks brief, so focus remains on measurement tasks rather than on managing protective equipment. Clear labelling and a consistent accessory format mean stores and toolrooms can keep inventory under control and minimise procurement overhead. OEM alignment and traceable identification As an accessory from KERN, the hood is designed to match the intended application and mechanical interfaces of the MPLS.420-3F series, ensuring a predictable fit and function. Traceable identification via the SKU supports stock control and reorder accuracy, while origin information contributes to supply‑chain transparency. This alignment reduces the risk of ill-fitting substitutes and supports a reliable maintenance plan that safeguards measurement accuracy over time. For original KERN accessories such as the PLJ-A01S05 protective hood and for ordering or technical advice, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 (WhatsApp +49 170 2837271) Technical data Article number: PLJ SKU: PLJ-A01S05 GTIN: 4045761186972 Manufacturer: KERN Country of origin: IT Facts Weight: 0.03 kg eClass: 24322502 Tariff number: 39269097 Special features Compatibility: for MPLS.420-3F series Scope of delivery: five covers per set Category: Scales > Accessories FAQ What is the primary purpose of this hood? The protective hood is intended to reduce dust and incidental splashes on the weighing area, helping to maintain cleanliness and support consistent measurements for the MPLS.420-3F series. Is this an original KERN accessory? Yes, the item is a KERN accessory supplied under SKU PLJ-A01S05 and is specified for use with the MPLS.420-3F scales. Can the covers be replaced individually? Covers supplied in the set can be rotated and replaced individually to allow ongoing operation while others are being cleaned or put into storage. How does this accessory benefit routine maintenance? By reducing contamination, the hood contributes to longer intervals between detailed cleanings, which can lower indirect maintenance effort and help preserve calibration stability. Manufacturer: KERN; Address: –; Contact: –

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930

Benefit from a hook designed specifically for underfloor hanging-load weighing, combining compatibility with KERN precision scales and reliable construction for repeatable measurements; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice and delivery options. Hook PLJ-A02 – Underfloor weighing hook for KERN precision scales The Hook PLJ-A02 is a dedicated lifting accessory for underfloor weighing applications, intended to secure suspended loads for precise measurements with KERN precision scales. For underfloor hanging-load weighing Compatible with KERN precision scales Robust German origin design Rapid dispatch available Accurate handling of suspended loads for repeatable results The accessory is engineered to support underfloor weighing tasks where suspended loads require secure attachment and stable positioning. By providing a defined mechanical interface for load suspension, the component reduces measurement variability and helps maintain traceable weighing results. The design focuses on repeatability rather than decorative aspects, so workshop workflows benefit from fewer re-checks and more predictable process times. The compatibility with established scale systems simplifies integration into existing measurement setups. Seamless integration into KERN scale systems for efficient workflows Compatibility with KERN precision scales ensures the hook works as part of a calibrated measurement chain, enabling straightforward installation and consistent data capture. Where scale interfaces are standardised, the accessory allows rapid attachment and removal of loads without lengthy reconfiguration. The mechanical coupling is intended to be robust and simple to use, which lowers downtime between measurements and supports higher throughput in production environments that rely on accurate weight data. Practical supply and traceability for professional workshops With German origin and clear identification via GTIN and SKU, the item supports professional procurement and inventory management. The accessory is documented for easier stock keeping and audit trails, aligning with workshop demands for traceable components. Rapid dispatch options from the supplier reduce lead times, helping to maintain continuous operation at the bench or on the shop floor. For buyers seeking reliable measurement accessories, the documented provenance and catalogue references simplify acceptance into standard tool lists. Contact Metav Werkzeuge in Emmerich to confirm compatibility with existing KERN scales and to arrange supply of the PLJ-A02 — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise ordering information and delivery from our Emmerich warehouse Technical data Article number: PLJ-A02 Manufacturer: KERN GTIN: 4045761106932 Origin: DE Facts Tariff number (HS): 90160090 eCl@ss: 27400890 Special features Accessory for underfloor weighing of suspended loads Suitable for use with KERN precision scales Category: Scales › Accessories FAQ What is the primary purpose of this hook? The PLJ-A02 hook is designed for securing suspended loads during underfloor weighing to enable repeatable and stable measurements with precision scales. Is the hook compatible with KERN scales? Yes, the accessory is specified for use with KERN precision scales, offering a direct mechanical interface suitable for standard weighing setups. What load capacity does the hook support? No maximum load is specified in the available product data for the PLJ-A02; the technical dataset does not include a rated capacity. How is the PLJ-A02 identified for procurement? The component is listed under SKU PLJ-A02 with GTIN 4045761106932 and tariff number 90160090 for ordering and inventory purposes. KERN · Origin: Germany · Seller: Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930