400x250mm Granite Surface Plate With 4x M10 Threaded Inserts, DIN 876/0 - Filetta
€173.00
Product information "400x250mm Granite Surface Plate With 4x M10 Threaded Inserts, DIN 876/0 - Filetta"
Benefit from the combination of DIN 876/0 flatness, robust granite construction and integrated M10 fixing points for reliable inspection and fixture work; order this plate directly via Metav Werkzeuge or consult our advisers for application advice.
Granite plate MS402.038 — precision surface plate, 400 x 250 x 50 mm, 4×M10 (Filetta)
The Granite plate MS402.038 is a compact precision surface plate intended as a flat reference and mounting surface for inspection, jig assembly and metrology bench applications.
- High-stability granite construction
- DIN 876/0 accuracy class
- Four M10 threaded fixing points
Repeatable measurements through proven flatness
The plate is manufactured to DIN 876/0, which ensures a defined level of flatness suitable for routine inspection and workshop control tasks. The combination of natural granite and controlled machining reduces local deformation under load, delivering a stable reference surface that improves measuring repeatability. This level of specification benefits processes where consistent comparison of parts is required and helps to reduce rework caused by uncertain reference standards.
Secure fixturing and practical bench format
With four threaded fixing points (4×M10) and compact dimensions of 400 x 250 x 50 mm, the plate offers a practical balance between reach and rigidity for bench-top work. The overall mass provides inherent stability during measurements and small assembly tasks, while the threaded inserts simplify attachment of fixtures, clamping elements or lightweight stands. This results in faster set-up times and fewer adjustments when aligning components for visual inspection or jig assembly.
Built for workshop routines and inspection benches
The material choice provides wear resistance and dimensional stability under normal workshop conditions, making the plate well suited to everyday metrology tasks on inspection benches or portable stands. Its format and thread pattern match common fixturing practices so that small fixtures and tripods can be integrated without complicated adaptors. The result is a practical reference surface that supports consistent quality checks and straightforward integration into existing inspection workflows.
For precise application advice or to arrange supply of the Filetta MS402.038 through Metav Werkzeuge in Emmerich, contact Metav Werkzeuge to confirm suitability and delivery details
Technical data
- Article number: MS402.038
- Dimensions: 400 x 250 x 50 mm
- Weight: 20 kg
- Threads: 4 x M10
- Standard: DIN 876/0
Facts
- Flatness class: DIN 876/0
- Material: granite
- Number of threaded fixing points: 4
- Thread size: M10
- Mass: 20 kg
Special features
- Suitable for metrology and inspection tables
- Compact format for bench-top use
- Compatible with stands and fixtures (stativ)
- Robust granite surface resists wear
FAQ
What flatness standard does the plate meet?
The Filetta granite plate MS402.038 is manufactured to DIN 876/0, providing a defined flatness class for routine inspection and comparative measurements.
How can the plate be mounted or fixed?
The plate includes four M10 threaded fixing points for direct attachment of clamping elements, fixtures or lightweight stands.
Is the plate suitable for bench-top inspection use?
Yes, the 400 x 250 x 50 mm format and 20 kg mass make the plate well suited to bench-top inspection and jig assembly where a stable reference surface is required.
How should the surface be maintained?
Maintain the granite surface with a soft brush or lint-free cloth; avoid abrasive cleaners and strong solvents to preserve the measuring face and mounting threads.
Can the plate be used with portable stands or tripods?
The design and threaded fixing points allow integration with common portable stands and fixtures, enabling flexible use on inspection benches and small assembly stations.
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Zubehör
Reliable support for measuring tables is achieved with an adjustable foot that combines a secure M10 thread, a broad 39 mm base and a compact, service-friendly design; order the adjustable foot directly via Metav Werkzeuge or ask our consultants if needed Adjustable foot MS636.760 — M10 threaded support for measuring tables (Filetta) The adjustable foot provides a stable, height-adjustable support for measuring tables and stands, designed for secure attachment and reliable load distribution in workshop and inspection environments Adjustable support element with M10 thread Broad 39 mm base for even load distribution Simple retrofitting to standard M10 mountings Compact design for tight installation spaces Improved repeatability through stable support A robust support point is a small detail that improves measurement repeatability. The M10 thread ensures a positive mechanical connection to frames and table plates, while the 39 mm base spreads load and reduces point pressure. As a result, mechanical resonance and local deformation are reduced, which leads to more consistent readings during inspection or assembly tasks. Fewer micro-shifts at the support translate directly into lower rework rates and faster quality checks, making the component a pragmatic efficiency gain for production and metrology benches. Fast installation and compatibility with common equipment Fitting or replacing machine supports is straightforward when standardised thread sizes are used. The M10 interface of this component matches common metric fastenings, enabling quick retrofitting to existing measuring tables, tripods or stands without special adaptors. The compact footprint allows installation in confined spaces and close to fixtures, which simplifies jig assembly and shortens maintenance windows. For procurement planning, the Filetta MS636.760 is a low-complexity component that reduces downtime and supports lean workshop procedures. Practical design for wide-ranging workshop use Although compact, the support is intended for demanding shop-floor applications where secure seating and simple adjustability matter. The geometry of the base prioritises stable contact and resistance to tilting, which benefits inspection rigs, small measurement tables and portable stands alike. Sourcing these components through a dedicated distributor ensures consistent quality across batches; Metav’s distribution model provides traceable logistics and a practical supply channel for replacement parts and matching fittings, supporting uninterrupted operation on the shop floor. Contact Metav Werkzeuge in Emmerich for advice on compatibility, supply and tailored quantities for the Filetta adjustable foot MS636.760 Technical data Article number: MS636.760 Manufacturer: Filetta Category: Measuring table support (Messtisch) Measurements & thread Base diameter: 39 mm Thread: M10 Thread length: 20.6 mm Features Adjustable foot element Intended for measuring tables and stands Compact footprint for tight installation spaces FAQ Is the support compatible with standard metric mountings? Yes. The Filetta MS636.760 is equipped with an M10 thread and is compatible with standard metric M10 mountings used on measuring tables and stands. What is the contact area of the base? The base has a diameter of 39 mm, offering a broad contact area for improved load distribution and reduced point pressure. How deep is the threaded engagement? Thread engagement is provided by an M10 thread with a thread length of 20.6 mm, suitable for secure fastening into common support plates. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com