Ø35x33 Precision Caliper Magnifier 15x, Ø20 Field Scale 0.1mm, 0–14mm Measuring Range - Peak

Compact precision for routine optical checks: the Ø20 mm aperture delivers consistent reference points, while the standard format simplifies integration into inspection setups. Benefit from dependable repeatability and straightforward handling — order via Metav Werkzeuge or consult our specialists for application advice. Peak Standard Template (Ø20 mm) – Optical calibration gauge Peak Standard Template for basic optical checks and routine calibration in inspection and microscope alignment applications. Standard optical reference Ø20 mm Supplied as a single piece for traceability Designed for simple integration into inspection rigs Reliable references that reduce rework and inspection time The template provides a stable reference for repeated optical checks, helping to reduce unnecessary re-measurements and rework. Built as a standard item, the device supports quick verification processes and minimises downtime between tests. By using a consistent aperture size, operators achieve uniform results across multiple checks, improving throughput in small-series or workshop environments. The emphasis is on measurable benefits: faster set-up and fewer ambiguous readings during visual inspection. Integration into everyday inspection workflows Configured in a standard format, the gauge is suitable for straightforward placement within existing inspection jigs and optical benches. Its Ø20 mm aperture offers a recognisable datum that aligns with common calibration routines, allowing technicians to validate optical paths or align components with minimal adjustment. This simplicity makes the unit a practical addition to workshops and labs that require dependable, repeatable references without complex fixtures or special training. Clarity in results and easy documentation Using a uniform reference piece enhances traceability and eases the documentation of inspection results. When recorded alongside measurement data, the presence of a standard template helps establish consistent pass/fail criteria and supports quality audits. The standardised format reduces interpretation variance between operators, so acceptance criteria remain stable and downstream decisions are better founded on reliable optical checks. Practicality for small workshops and service departments Supplied as an individual item and categorised for optical use, the template suits smaller operations that prioritise cost-effective precision. Its compact nature facilitates storage and fast deployment, while the standard design keeps training requirements low. For service departments that manage diverse inspection tasks, a simple, dedicated optical reference can streamline daily routines without the need for elaborate calibration equipment. For consistent optical calibration and straightforward integration, request the Peak standard template (SKU MS905.272) through Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: MS905.272 Brand: Peak Designation: Peak Standardschablone Variant: einzeln, Ø20mm Category: Optik Facts Diameter: Ø20 mm Special features Standard template for optical checks Supplied as a single piece Suitable for use in inspection and alignment setups FAQ What is the aperture size of the template? The template features a Ø20 mm aperture and is listed under SKU MS905.272 by Peak, suitable as a consistent optical reference. Is the item supplied individually or in sets? The article is supplied as a single piece (einzeln), making it convenient for targeted inspection tasks and easy traceability. For which applications is this template intended? The template is intended for optical checks, calibration routines and alignment tasks within inspection setups and microscopes, providing a repeatable reference point. Does the template require special fixtures to be used? No special fixtures are required; the standard design is intended for simple integration into existing inspection rigs and benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, standard template that streamlines optical inspection and supports consistent alignment across repeated checks. The combination of a clear reference format and straightforward handling helps reduce inspection time while improving repeatability. Order the Peak Standard Template No. 1 directly via Metav Werkzeuge or ask our consultants if needed. Peak Standard Template No. 1 — Optical alignment template for inspection A Peak Standard Template No. 1 designed as a simple reference for optical inspection and alignment in workshop inspection routines Peak standard template for optics Compact format for easy storage Enables consistent alignment during inspection Suitable for optical workshop workflows Faster, repeatable optical checks with less uncertainty The standardised reference offered by this template allows rapid, comparable checks during visual and optical inspection routines. By providing a fixed pattern for positioning and alignment, measurement variation is reduced and process times are optimised. For repetitive tasks, the template contributes to a predictable workflow and supports quality control measures that rely on consistent visual references rather than ad hoc setups. Integrates with common inspection workflows for greater efficiency Designed for use in optical environments, the template fits naturally into bench-based inspection stations and complements microscope-assisted checks. The simple format means it can be positioned quickly and reused across batches, which helps to maintain throughput without compromising the clarity of each inspection. This straightforward integration reduces setup steps and keeps the focus on the inspection result. Supports reliable documentation and process consistency Using a constant reference improves traceability in routine inspections and makes it easier to document conformity or deviations. The template is intended to assist with alignment and visual comparison tasks, helping teams achieve consistent outcomes across shifts and operators. Backed by Metav’s commitment to accessible precision, the product aligns with workshop needs for dependable, easy-to-adopt tools that support reproducible results. For reliable optical alignment in busy workshops, request the Peak Standard Template No. 1 from Metav Werkzeuge — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for tailored advice and order support Technical data Article number: MS905.273 Name: Peak Standard Template Type: No. 1 Facts Image file size: 470836 bytes Category path: Optik Special features Brand: Peak Asset URL: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d1/33/d0/67/67d033d142e38a433141d0ab/MS905273-main.jpg FAQ What is the Peak Standard Template No. 1 intended for? The Peak Standard Template No. 1 (SKU MS905.273) is intended as a reference for optical inspection and alignment tasks in workshop and inspection-bench environments. Can the template be used alongside microscopes for fine inspection? Yes. The template is suitable for use in conjunction with microscopes and other optical inspection equipment to support consistent visual checks. Which product category does this item belong to? This item is listed under the Optik category and serves as a basic alignment and reference tool for optical workflows. How does the template improve serial inspection routines? By providing a fixed reference, the template enables consistent placement and alignment across multiple parts, reducing variability between checks and supporting repeatable documentation. What information identifies this product for ordering? The product is identified as Peak Standard Template No. 1 with SKU MS905.273, which should be referenced when enquiring or ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The Peak standard template Nr. 2 delivers a clear optical reference for inspection and alignment, combining straightforward identification with reliable procurement via Metav Werkzeuge. Benefit from standardised comparison marks and an exact ordering reference to keep inspection workflows consistent; order directly through Metav Werkzeuge or consult their specialists for application guidance. Peak Standard Template Nr. 2 — Optical reference for inspection and alignment A Peak Standard Template Nr. 2 serving as a compact optical reference for visual inspection and equipment alignment in workshop and laboratory environments. Optical reference template Designation Nr. 2 for standard comparison SKU MS905.274 for ordering Peak brand identification Ensure consistent visual inspection with a standard optical reference A standardised reference reduces uncertainty during visual checks and calibration routines. The optical reference provided by this template supplies a repeatable basis for comparison, which supports faster decision-making in quality workflows. By relying on a clearly designated reference, traceability of inspection outcomes is improved and routine checks become more consistent across different shifts or sites. Speed up alignment and quality-control procedures Using a defined template helps streamline quality control tasks and alignment operations on benches and inspection rigs. The template's role as a stable reference point shortens setup and verification times, enabling technicians to focus on measurement accuracy rather than recalibration. This leads to fewer interruptions in production and a more efficient inspection cycle overall. Integrate the template into diverse optical workflows The template is suitable for inclusion in various inspection scenarios where a visual standard is required. Its compact identification as Nr. 2 makes cataloguing and retrieval straightforward, simplifying inventory management and reducing procurement ambiguities. The clear SKU reference supports rapid reordering and ensures the exact variant is specified during purchases. Procurement clarity and administrative benefits A concise product identity and SKU minimise procurement errors and support transparent stock keeping. The designation MS905.274 provides an unambiguous order reference for purchasing departments and suppliers, which is particularly valuable for companies managing multiple inspection aids. Centralising orders through a trusted distributor further reduces administrative effort and ensures dependable supply. For precise optical referencing choose the Peak Standard Template Nr. 2 and contact Metav Werkzeuge for tailored advice and prompt fulfilment from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: MS905.274 Designation: Peak Standard Template Type designation: Nr. 2 Facts Category: Optik SKU: MS905.274 Special features Brand: Peak Image available: yes FAQ What is the primary function of this template? The Peak Standard Template Nr. 2 functions as an optical reference for visual inspection and alignment, providing a repeatable comparison point for quality-control checks. Can this template be used in workshop and laboratory environments? Yes. The template is intended for workshop and laboratory inspection routines where a defined optical standard supports consistent results. How is the product identified for ordering? Order using the SKU MS905.274 and the designation Peak Standard Template Nr. 2 to ensure the correct item is supplied. Does the template support traceability in inspection processes? Inclusion of a clearly defined template like this aids traceability by standardising the reference used in inspections and simplifying documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of brand-backed reference, standardised format and clear identification to streamline optical inspection tasks. Order the Peak Standard Template No. 8 directly via Metav Werkzeuge or consult our experts for tailored advice. Peak Standard Template No. 8 (MS905.275) — optical reference template The Peak Standard Template No. 8 serves as a compact, clearly identified reference for optical inspection and component comparison in quality control and visual measurement workflows Peak standard reference template No. 8 Compact optical reference for inspections Clear identification with SKU MS905.275 Consistent reference for repeatable optical checks A standards template is primarily a reference stencil that supports reliable visual comparison and alignment during inspections. The Peak Standard Template No. 8 provides a uniform benchmark that reduces interpretation variance between operators, which improves repeatability in routine checks. For workshops and inspection stations where consistent visual assessment matters, a clearly defined reference reduces rework and accelerates decision-making without requiring additional measuring equipment. Streamlined inspection workflow and time savings By using a dedicated reference template, inspection steps become more structured and faster to execute. The compact format and unambiguous markings enable quick placement and evaluation, offering a tangible efficiency gain in daily production or laboratory routines. This time-saving effect is particularly relevant for repetitive visual checks, where small reductions per cycle compound into measurable throughput improvements. The template’s simple handling also lowers threshold for staff training and ensures a steady inspection pace. Practical compatibility with optical setups The reference stencil is suitable for integration into various optical quality-control environments, including visual comparators and light-table inspections. As a visual aid, it complements digital measurement where a rapid on-the-spot assessment is required. The design supports straightforward mounting or placement during comparative tasks and enables clear photographic documentation when required. Its role is to act as a dependable visual standard within broader inspection routines rather than as a replacement for calibrated measuring instruments. Reliable brand choice and consistent supply Sourcing a recognised reference such as this template from Peak ensures transparency in identification and ordering (SKU MS905.275). Coupled with Metav’s distribution network, the product fits into a dependable supply chain that prioritises consistent availability for workshops and specialist resellers. For procurement and planning, the combination of a recognised stencil and reliable logistics reduces the risk of process interruptions and helps maintain quality-control continuity. Contact Metav Werkzeuge today for expert advice and to secure the Peak Standard Template No. 8 (MS905.275) for dispatch from Emmerich. Technical data Article number: MS905.275 Product name: Peak standard template No. 8 Category: Optics Identifiers and type SKU: MS905.275 Type: No. 8 Applications and features Application: optical inspection / visual reference Brand: Peak Use case: quality control and component comparison FAQ What is the primary purpose of this template? The Peak Standard Template No. 8 (MS905.275) is intended as a consistent visual reference to support optical inspection and comparative checks in quality-control workflows. Can the template be used alongside digital measurement systems? Yes, the template complements digital measurement by offering a quick visual benchmark for immediate assessment and photographic documentation within inspection routines. Which environments benefit most from this reference stencil? Workshops, optical component manufacturers and inspection labs that perform frequent visual comparisons or alignment checks benefit from using this reference. How is the product identified for ordering? Order using SKU MS905.275 and the designation Peak Standard Template No. 8 to ensure exact match with the listed reference template. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com