30x Inspection Loupe Ø30x19 Ø7 Field 0.05 Scale - Peak
€77.00
Product information "30x Inspection Loupe Ø30x19 Ø7 Field 0.05 Scale - Peak"
Take advantage of 30× magnification, a 0–5 mm measuring range and a 0.05 mm scale to speed up routine inspections and reduce measurement uncertainty; order the item directly via Metav Werkzeuge or contact our consultants for specification matching.
Peak Measuring Loupe MS905.285 — portable optical inspection instrument with precision scale
The Peak Measuring Loupe MS905.285 is a compact optical inspection tool for precise visual measurement and quick dimensional checks in workshop and quality-control settings
*Peak measuring loupe with 30× magnification *Measuring range 0–5 mm with 0.05 mm scale *Ø7 mm view field for small features *Compact Ø30×19 mm housing for bench use
Rapid, accurate readings for small features
The instrument offers 30× magnification, enabling fast detection of details that are otherwise difficult to see with the unaided eye. The integrated 0.05 mm scale allows for direct reading of fine dimensions within the 0–5 mm measuring range, which accelerates routine checks and reduces the need for auxiliary measuring steps. For operators who carry out frequent inspections, this translates into fewer handling steps and a more efficient workflow without sacrificing accuracy.
Practical design for bench and portable use
Designed with a compact housing Ø30×19 mm, the loupe fits easily on a bench or in a kit bag for on-site visual inspection. The Ø7 mm view field concentrates the inspection area, making it easier to compare small features and blemishes under consistent magnification. The compact form factor supports ergonomic handling during repeated checks and helps integrate the device into established inspection routines without requiring additional fixtures.
Integrating the loupe into inspection procedures
The optical unit is suitable for quick verification and routine precision checks where direct visual measurement is sufficient. By combining enhanced magnification with an easily legible 0.05 mm scale, the device supports rapid decision-making during quality control and small-part assembly. For traceability in routine use, measurements can be recorded alongside other inspection data as part of standard process documentation to ensure consistent results across shifts.
Discuss how the Peak MS905.285 measuring loupe matches inspection requirements with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice
Technical Data
- Article number: MS905.285
- Manufacturer: Peak
- Product name: Peak Measuring Loupe
Facts
- Magnification: 30×
- Scale division: 0.05 mm
- Measuring range: 0–5 mm
- View field: Ø7 mm
- Dimensions: Ø30×19 mm
Special features
- Category: Optics
- SKU: MS905.285
- Image available: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/7e/30/d0/67/67d0307e42f0750198b460b5/MS905285-main.jpg
FAQ
How fine is the scale on the measuring loupe? The Peak measuring loupe MS905.285 features a 0.05 mm scale division suitable for fine comparative measurements within its 0–5 mm range.
What magnification does the instrument provide? The device delivers 30× magnification, which enlarges small details for inspection; the view field is Ø7 mm for concentrated observation.
Which inspection tasks is this loupe best suited for? The loupe is well suited to quick visual inspection and small-part measurement workflows in workshop, electronics and jewellery-related checks where a compact optical measuring tool is advantageous.
Can fine features be measured reliably with this unit? With the 0.05 mm scale and focused Ø7 mm view, MS905.285 supports reliable, rapid readings for routine precision checks rather thanreplace high-end laboratory metrology equipment.
Is a product image available for reference? An image is provided in the product listing; refer to the product assets for a visual overview of MS905.285
Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Magnification: | 30x |
|---|
Zubehör
A compact, single-piece optical reference with a 7 mm aperture, the Peak standard template delivers a consistent visual datum for routine inspection and alignment; order the item directly via Metav Werkzeuge or consult the team for application advice. Peak standard template — optical template with 7 mm aperture A Peak standard template for optical inspection and alignment, supplied as a single unit with a precise 7 mm aperture Precision aperture 7 mm Single unit delivery For optical inspection and alignment Consistent reference for quicker inspection decisions A calibrated aperture provides a clear, repeatable visual reference that supports faster acceptance checks and alignment tasks. The 7 mm aperture functions as a stable datum in optical workflows, reducing variability that can arise from ad hoc gauging. For production environments where visual standards must be applied repeatedly, the aperture template helps standardise inspection routines and speeds up setup and cross-checks between stations. Emphasis on a simple, unambiguous reference enhances traceability in everyday inspection tasks. Practical handling that integrates into existing processes Delivered as a single unit, the template is compact and intended for immediate use in bench-top or assembly-line checks. Its form factor simplifies storage and retrieval in common inspection kits, keeping the instrument readily accessible during short measurement cycles. The straightforward nature of the item minimises training overhead and supports lean handling practices: introduce the template into existing SOPs with minimal disturbance and maintain consistent visual criteria across operators and shifts. Supports a range of optical quality-control tasks The aperture template is suitable for routine tasks such as alignment verification, comparative visual assessment and basic lens or fixture positioning in optical assemblies. By offering a clear, repeatable aperture, the tool contributes to quality control measures without requiring specialised measuring instruments. When visual conformity and positional consistency are the objective, the template reduces ambiguous judgements and can be used in combination with microscopes, cameras or manual inspection benches as an objective reference point. Sourcing that prioritises dependable supply and industry expertise Choosing this optical template via an experienced supplier adds value beyond the item itself: consistent availability and a thoughtful product assortment simplify procurement and reduce lead-time risk. Metav’s approach to precision—combining a broad catalogue with regional fulfilment—supports continuity of supply and pragmatic purchasing for workshops and industry alike. The practical benefit is a reliable reference tool that fits into established inspection chains and contributes to steady, repeatable results on the shop floor. For standardised optical checks, request the Peak standard template (MS905.286) from Metav Werkzeuge; Metav’s team can advise on integration and availability — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: MS905.286 Brand: Peak Name: Peak standard template Variant: single, Ø7 mm Category: Optik Facts Diameter: 7 mm Image file size: 207200 bytes Special features Single unit delivery Optical reference template Image asset available FAQ What is the aperture size of the template? The aperture measures 7 mm and is stated on the technical data for the Peak standard template (MS905.286). How is the product supplied? The item is supplied as a single unit, indicated by the variant description for the Peak standard template. What applications suit this template? The template is intended for optical inspection tasks such as alignment checks, comparative visual assessments and basic positioning during assembly. Is the template compatible with visual inspection setups? Yes; the template serves as a repeatable visual datum and can be used alongside microscopes, cameras and bench-top inspection fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com