6.4mm Washer DIN 6340 For M6 Screws, Steel 3mm Thickness - AMF
The combination of DIN 6340 conformity, a precise 6.4 mm bore and a sturdy 3 mm thickness provides dependable load distribution and consistent clamping for M6 fastenings; order directly via Metav Werkzeuge or consult our specialists for application advice. DIN 6340 plain washer for M6 screws, 6.4 mm bore — AMF DIN 6340 plain washer designed to distribute clamping forces for M6 fastenings in workshop and industrial assemblies Conforms to DIN 6340 standard Hole Ø 6.4 mm for M6 fastenings Outer Ø 17 mm, thickness 3 mm Suitable for workshop and industrial use Precise load distribution for secure assemblies The DIN 6340 plain washer is engineered to widen the bearing surface of an M6 bolt or nut, reducing localised stress and improving joint stability. With a bore of 6.4 mm and a thickness of 3 mm, the component ensures reliable contact with standard M6 threads while the 17 mm outer diameter spreads load evenly across softer substrates. This measurable specification translates into fewer material deformations and extended service life for bolted connections, supporting predictable assembly behaviour in production and maintenance environments. Consistent fit and standardised replacement parts Manufactured to the DIN 6340 specification, this washer offers interchangeability and consistent fit in repeatable production processes. The adherence to a recognised standard simplifies inventory management and quality control: replacement parts match original dimensions and tolerances, reducing downtime during repairs. Packaged individually for traceable handling, the component is suitable for general workshop applications, machine assembly and routine maintenance where a standard plain washer is required for M6 fastenings. Practical benefits in everyday workshop use Selection of a standardised plain washer reduces risk of joint failure and supports efficient assembly workflows. The geometrical data (bore Ø 6.4 mm, outer Ø 17 mm, thickness 3 mm) allow engineers and fitters to calculate bearing pressures and choose compatible fasteners with confidence. Where assembly repeatability and conformity are priorities, this component serves as a straightforward, measurable solution that keeps joint behaviour predictable and maintenance intervals consistent. For technical clarification or to confirm suitability for a specific application, contact Metav Werkzeuge in Emmerich — our consultants provide precise advice and availability information for AMF DIN 6340 plain washers. Basic data Article number: 4000833435NW SKU: 4000833435NW Brand: AMF Facts Standard: DIN 6340 Bore diameter (D1): 6.4 mm Outer diameter (D2): 17 mm Thickness (S): 3 mm Suitable for: M6 Special features Product type: plain washer Packaging unit: 1 Label: U-washer DIN 6340 for M6, bore Ø 6.4 mm, AMF FAQ What size bolt is this washer intended for? This washer is intended for M6 fastenings; the bore diameter is 6.4 mm to accommodate standard M6 bolts and screws. Does the washer meet an established standard? Yes—the product conforms to DIN 6340, ensuring standardised dimensions and fit for industrial use. What are the exact dimensions of the washer? Key dimensions: bore Ø 6.4 mm, outer Ø 17 mm, thickness 3 mm, as specified for the DIN 6340 plain washer (SKU 4000833435NW). Is material information provided for this washer? Material is not specified in the provided data; consult the technical datasheet or Metav Werkzeuge for confirmation of material and any surface treatments. Can this washer be used in machine assembly and maintenance? The washer’s standardised dimensions and load-distributing function make it suitable for general machine assembly, maintenance and workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60-80mm Screw Clamp With Flat Support And Magnetic Base, Load Capacity 100 N, TR 30x4 - AMF
The combination of an adjustable height range, a magnetic base and a flat support delivers versatile, secure clamping for frequent workshop tasks; robust construction and a stated load figure ensure dependable positioning. Order directly through Metav Werkzeuge or contact our consultants for application advice. Bench Vice No. 6400M - 80 — flat support and magnetic base (AMF) The Bench Vice No. 6400M - 80 is a compact workshop vice designed for secure workholding with an adjustable height range and a sturdy magnetic base for rapid, repeatable set-up. Height adjustable 60–80 mm Magnetic base for stable attachment Flat support to protect workpieces Robust load capacity up to 100 Secure, adjustable workholding for varied tasks A precision workholding solution, the vice offers an adjustable height of 60–80 mm, which enables alignment with jigs, fixtures and other tool stations. The magnetic base provides quick, repeatable positioning on ferrous bench tops and machines, reducing set-up time and increasing throughput on repeated operations. With a stated load capacity of 100, the clamp is intended to deliver secure clamping for typical light to medium workshop duties while the flat contact area minimises point loading on components. Gentle support that protects finished surfaces The vice’s flat support is designed to distribute clamping pressure across a broader area, which helps avoid marks on softer workpieces and reduces the need for additional protective packing. This design feature is especially useful when holding delicate components or pre-finished parts, as the contact geometry lowers the risk of deformation. The result is a balance between firm retention and component care, enabling safer handling during machining, assembly or inspection tasks. Fast setup and dependable positioning in the workshop Built for efficient workflow, the magnetic mounting simplifies relocation and repeatable fixture placement, reducing machine downtime between operations. The compact format and stable base support make the unit suitable for maintenance benches, small production cells and measurement benches where quick changes are common. Where repeatability and reliable holding are priorities, this clamp provides a pragmatic mix of speed and stability for day‑to‑day workshop demands. For application guidance or to discuss compatibility with existing fixtures, contact Metav Werkzeuge for expert advice on the AMF bench vice No. 6400M - 80 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000833476NW Type: Nr. 6400M - 80 Manufacturer: AMF Product type: Bench vice Packaging unit: 1 Facts Max. load capacity: 100 Height range: 60–80 mm D1: 50 mm D2: 50 mm D3: 55 mm TR: 30 x 4 Special features Flat support Magnetic base Height-adjustable FAQ What is the adjustable height range of the vice? The AMF bench vice No. 6400M - 80 offers an adjustable height range of 60–80 mm (SKU 4000833476NW), enabling alignment with various fixtures and workstations. Can the magnetic base be used on all benches? The magnetic base secures the vice reliably to ferrous surfaces; for non‑ferrous benches a separate mounting solution will be required when using the No. 6400M - 80. Is the flat support suitable for delicate components? Yes, the flat support on the No. 6400M - 80 spreads clamping force to reduce marking and is suitable for holding pre‑finished or softer workpieces during light machining and assembly. What does the listed load figure indicate? The specification lists a load capacity of 100 for the No. 6400M - 80 (AMF, SKU 4000833476NW), which is intended as an indication of its robust holding capability for typical workshop tasks. Which dimensions are provided for mounting and interfaces? Key dimensional references include D1: 50 mm, D2: 50 mm, D3: 55 mm and the thread indication TR: 30 x 4 as given in the product data for the No. 6400M - 80. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Clamping Wedge For 8mm T-Slot, For M8, DIN 6314 - AMF
Benefit from DIN 6314 conformity, 8 mm T‑slot compatibility and a compact 60 mm overall length for reliable, space‑efficient clamping; order the part via Metav Werkzeuge or ask the consultants for application advice. AMF clamping bar DIN 6314 for T‑slot 8 mm, L 60 mm The AMF clamping bar DIN 6314 is a compact clamping component for machine tables and fixture plates, engineered to engage 8 mm T‑slots and secure workpieces with M8 clamping screws. DIN 6314 compliant clamping component Fits 8 mm T‑slot profiles Compatible with M8 clamping screws Compact 60 mm overall length Reliable, standardised interface for predictable fixture assembly Compliance with DIN 6314 ensures a standardised interface that simplifies fixture planning and inventory management. The design is matched to an 8 mm T‑slot, meaning the clamp locates consistently in widely used machine table profiles; this reduces setup time and avoids trial‑and‑error fitting. Compatibility with M8 clamping screws permits use with common clamping hardware, allowing predictable clamping forces when paired with suitable bolts and washers. The result is a reproducible, auditable clamping solution for series or one‑off operations. Space‑efficient geometry that suits compact setups The compact geometry, with an overall length of 60 mm and a width of 9 mm, makes the clamp suitable where table real estate is limited. The reduced footprint enables multiple clamps to be positioned closely for short overhangs and confined machining zones, improving rigidity without sacrificing accessibility. Where minimal obstruction is required — for example in multi‑fixture nests or when using probing systems — the slim form factor supports efficient use of the working area while maintaining a secure hold. Practical data for workshop integration and planning Technical planners benefit from the documented addition values (Addition: A: 12; B2: 25; B3: 10; E1: 13; E2: 22), which support accurate alignment and accessory selection during fixture construction. Supplied as single units (packaging unit: 1), these clamps are straightforward to manage in small batches or mixed orders. For specific fixture designs or load cases, consult Metav Werkzeuge’s technical advisors who can assist with integration details and recommend matching clamping screws or complementary components to ensure a reliable system. Contact Metav Werkzeuge for tailored advice on using the AMF clamping bar DIN 6314 in precision fixture setups or to request delivery from our Emmerich stock. Technical Data Article number: 4000833001NW Product type: Clamping bar Brand: AMF Standard: DIN 6314 Facts Overall length: 60 mm Width: 9 mm T‑slot size: 8 mm Suitable for: M8 Special features Packaging unit: 1 Label: Spanneisen DIN 6314 f.T-Nut 8mm L.60mm AMF Addition: A: 12; B2: 25; B3: 10; E1: 13; E2: 22 FAQ Is the clamp suitable for standard metric T‑slots? The AMF clamping bar DIN 6314 is designed specifically for an 8 mm T‑slot and is compatible with M8 clamping screws used in standard metric fixtures. Does this component comply with an industrial standard? Yes, the clamp is manufactured to DIN 6314, guaranteeing a standardised interface for fixture tables and accessory compatibility. What are the exact dimensions to plan for? Overall length is 60 mm and width is 9 mm; the T‑slot engagement corresponds to an 8 mm slot and the clamp is intended for use with M8 screws. How is the product supplied for workshop use? The item is supplied in a packaging unit of 1, allowing selective procurement for single fixtures or staged additions to an existing setup. What do the addition values in the data mean for assembly? The listed addition values (A: 12; B2: 25; B3: 10; E1: 13; E2: 22) are provided to support alignment and accessory selection during fixture design and should be considered when positioning complementary components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Extension Nut M20 SW30mm Corner Measure 33.5 - AMF
Combine reliable M20 compatibility with a 60 mm extension length and a 30 mm spanner width to extend threaded connections securely; order via Metav Werkzeuge or consult our specialists for application guidance. Extension nut No. 6334 - M20 by AMF — SW 30 mm, 60 mm height The Extension nut No. 6334 M20 is a compact extension nut designed to prolong M20 threaded connections for routine assembly, maintenance and clamping tasks. M20 thread for standard fittings SW 30 mm spanner access Overall height 60 mm Corner dimension 33.5 mm Secure extension for standard threaded assemblies The component provides a reliable method to extend a metric M20 connection without altering the original fastener arrangement. With a clearly defined M20 thread and an overall height of 60 mm, the part ensures that existing bolts and studs can be lengthened to meet assembly demands. This predictable, standardised geometry reduces the need for on-the-spot adaptations and minimises downtime in production or workshop settings. The feature helps maintain clamping integrity and avoids repeated rework, supporting efficient processes and measurable performance gains. Simple, tool-friendly installation and practical handling Installation is straightforward thanks to the SW 30 mm spanner flat, which allows access with common workshop tools. The specification of the spanner width is crucial: it permits controlled torque transfer during tightening, ensuring consistent clamping force and reducing the risk of over-torquing. The listed corner dimension of 33.5 mm assists in selecting clearance and tool profile during design or retrofit work. Supplied as a single unit, the part streamlines inventory management and facilitates immediate use in maintenance or assembly operations. Suitable uses and reliability in everyday workflows This extension element is intended for extending M20 threaded connections in routine industrial, trade and workshop applications where a short, robust extension is required. Its compact design makes it well suited to confined installation spaces while preserving the mechanical characteristics of the original fastener. The clear technical definition supports compatibility checks in procurement and planning phases, enabling procurement teams to make informed, low-risk decisions that maintain production continuity. For tailored technical advice on fitting AMF extension nuts and to source the correct No. 6334 M20 components, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt, expert assistance Technical data Article number: 4000833430NW Type: Nr. 6334 - M20 Product: Extension nut Brand: AMF Packaging unit: 1 Measurements Overall height: 60 mm Spanner width: 30 mm Corner dimension: 33.5 mm Thread: M20 Special features Extension for M20 threaded connections Single-piece supply Spanner access SW 30 mm FAQ What thread size does this extension nut use? The part is specified with an M20 thread suitable for standard metric M20 fittings and stud extensions. Which spanner or tool fits the nut? A spanner width of SW 30 mm is required to tighten or loosen the extension nut safely and to apply controlled torque. What is the overall length of the extension nut? The extension provides an overall height of 60 mm, allowing significant thread extension without modifying the original fastener. Is the item supplied as a single piece or in multiples? The product is supplied as a single unit; the packaging unit is 1 and the SKU is 4000833430NW. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Fork Clamp Bar Slot 6.6mm For M6 Clamping Screw, DIN 6315B - AMF
Take advantage of the fork-style design and DIN compatibility for consistent, repeatable clamping in modular fixtures; the 6.6 mm slot and 60 mm length provide secure engagement with M6 tensioning screws. Order the clamp directly via Metav Werkzeuge or consult the team for application advice. AMF Fork Clamping Wedge, DIN 6315B – 6.6 mm Slot, 60 mm Length The AMF Fork Clamping Wedge is a DIN 6315B-compliant fork-style clamping element for use with M6 tensioning screws, ideal for compact and modular fixture setups. DIN 6315B fork-style clamping element Slot width 6.6 mm for precise engagement Length 60 mm for compact fixture setups Designed for M6 tensioning screws Consistent compatibility for modular fixturing The compliance with DIN 6315B guarantees standardised interfaces across modular clamping systems, reducing setup time and simplifying spare-part management. The fork-style geometry ensures reliable seatÂing in correspondingly prepared jaws and fixtures, so repeatability is improved in series production. For operations converting between suppliers or extending existing setups, the standard conformity provides predictable mechanical behaviour and interchangeability. Secure engagement in limited spaces With a 6.6 mm slot and 60 mm overall length, the component is designed for tight fixtures where axial space is limited. The fork configuration produces a defined contact surface that supports high clamping stability when paired with M6 tensioning screws — a common thread size in workshop clamps. This combination benefits setups that require compact elements without compromising the clamping force needed for machining or assembly tasks. Practical advantages for workshop use The fork clamping element offers a straightforward mechanical function that is easy to integrate into vises and modular plates. Its simple design minimises handling complexity and supports efficient changeovers during production. The clear specification of slot width and length aids in planning fixture layouts, while the DIN standard alignment helps procurement maintain consistent inventory and prevent mismatches. Contact Metav Werkzeuge today for precise ordering and application guidance — Metav’s workshop expertise ensures the right clamping solution for each setup. Technical Data Article number: 4000833020NW Product type: Clamping wedge Design: Fork design Standard: DIN 6315B Compatible with: M6 tensioning screws Slot width: 6.6 mm Overall length: 60 mm Manufacturer: AMF Packaging unit: 1 UID: 4000833020NW Core dimensions Slot width: 6.6 mm Overall length: 60 mm Compatible thread: M6 Packaging unit: 1 Special features Fork-style clamping element DIN 6315B compatibility Axite enrichment: A: 12; B2: 19; B3: 6; B4: 3 FAQ What applications suit this fork clamping wedge? The fork clamping wedge is suitable for modular fixture systems, machine vises and compact clamping assemblies where a DIN 6315B interface and an M6 tensioning screw are used. How does the DIN 6315B standard benefit workshop planning? DIN 6315B standardisation simplifies interchangeability and spare-part management; using the AMF fork clamping wedge with standard components reduces setup time and inventory complexity. Can the clamp be used with other thread sizes? This item is specified for use with M6 tensioning screws; adapting to different thread sizes requires matching wedges and screws conforming to the same DIN interface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Stud Bolt Heat-Treated 10.9, DIN 6379, M8 Thread - AMF
Take advantage of the combination of high tensile strength, DIN 6379 compliance and precise M8 sizing for reliable, repeatable assemblies; order the part directly via Metav Werkzeuge or contact their consultants for specification support and sourcing. Stud screw DIN 6379 M8×63 mm, tempered to property class 10.9 (AMF) Stud screw DIN 6379 M8×63 mm for high-strength fastening in mechanical assemblies and industrial fixtures Tempered to property class 10.9 Conforms to DIN 6379 standard M8 thread, 63 mm overall length Reliable fastening for high-stress assemblies The Stud screw DIN 6379 M8×63 mm, tempered to property class 10.9, is designed for applications that demand elevated tensile and yield strength. The 10.9 rating indicates a quenched and tempered fastener with a high ratio of tensile to yield strength, ensuring secure clamping under dynamic loads. Conformity with DIN 6379 provides consistent geometry and thread quality, which supports predictable assembly performance and reduces the risk of premature failure in critical joints. Efficient installation and predictable performance With an M8 thread and an overall length of 63 mm, this stud screw fits common metric assemblies and simplifes inventory management. The specified width of 11 mm indicates the spanner size typically required for installation, enabling consistent torque application and repeatable assembly results. The single-unit packaging supports just-in-time replacements for maintenance tasks and small-scale fitting operations, while standard thread geometry ensures compatibility with matched nuts and threaded bores. Standards compliance and workshop readiness Manufactured to meet the DIN 6379 specification and tempered to a 10.9 strength class, this fastener supports quality assurance procedures and simplifies vendor approvals. The clear technical specification helps procurement and production planners minimise variability across batches and eases traceability back to the SKU. Robust mechanical properties reduce the likelihood of downtime from fastener failures, supporting reliable production flow and longer maintenance intervals. For availability and technical advice on this AMF stud screw, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 — consultants will advise on specifications and delivery Technical data Article number: 4000833246NW Description: Stud screw DIN 6379 M8×63 mm, tempered to property class 10.9, AMF Brand: AMF UID: 4000833246NW Packaging unit: 1 Facts Thread: M8 Overall length: 63 mm Width: 11 mm Standard: DIN 6379 Property class: 10.9 Materials & features Tempered to property class 10.9 Addition: b: 40 Product type: Stud screw FAQ Is this stud screw suitable for high-strength connections? Yes. The Stud screw DIN 6379 M8×63 mm is tempered to property class 10.9, providing the tensile strength required for high-stress mechanical joints and safety-critical assemblies. What does conformity with DIN 6379 mean for fit and interchangeability? Conformity to DIN 6379 guarantees standardised dimensions and thread form, so the stud screw fits consistently with matching nuts and tapped holes, simplifying procurement and assembly planning. Which spanner size is appropriate for installation? The specified width is 11 mm, indicating the common wrench or spanner size used for installation to achieve predictable tightening and secure clamping. Is the fastener supplied individually or in bulk? This item is supplied per single unit; the packaging unit is 1 and the SKU is 4000833246NW for ordering and inventory purposes. Is the material heat treated or surface finished? The fastener is tempered to property class 10.9, indicating a quenched and tempered condition that delivers elevated mechanical strength. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Stud Bolt M12 Quenched 10.9 DIN 6379, Hardened - AMF
Combining DIN 6379 conformity with a robust M12 thread and property class 10.9 heat treatment delivers repeatable clamping force and reduced downtime; reliable dimensions and high tensile performance support uninterrupted production. Order the threaded stud directly via Metav Werkzeuge or ask our consultants if needed. Threaded stud DIN 6379 M12×63, tempered to 10.9 (AMF) A threaded stud DIN 6379 M12×63 by AMF engineered for high-strength bolted assemblies where consistent clamping length and standard conformity are essential DIN 6379 compliant threaded stud Hardened to property class 10.9 M12 thread, total length 63 mm AMF high-strength manufacturing Dependable strength for critical assemblies Conformity with DIN 6379 and a property class 10.9 heat treatment mean the fastener is designed for high mechanical loads and reliable performance under repeated stress. The classification indicates a quenched and tempered condition that provides elevated tensile and yield properties; this reduces the risk of elongation or failure in demanding joints. For production environments where component integrity is critical, the combination of standard compliance and hardened condition contributes to predictable behaviour and fewer unscheduled stops. Precision dimensions that simplify assembly and inventory With an M12 thread and a total length of 63 mm, the component delivers consistent engagement depth and predictable clamping results. Precise sizing minimises trial-and-error during fitting, shortens assembly times and reduces the likelihood of rework or incorrect part selection. The clear dimensional specification also aids inventory management, allowing procurement and warehouse staff to standardise stock-keeping and simplify parts replenishment across maintenance and production teams. Durable treatment and workshop practicality The stud’s tempering to property class 10.9 gives a balance of hardness and toughness that improves wear resistance at thread roots and bearing surfaces, supporting longer service intervals. As a compact, standardised fastener from AMF, it integrates easily into existing bolting procedures and torque settings without special preparation. For complex assemblies or when precise technical data is required, clarification and specification checks are available to ensure the chosen fastener matches the mechanical demands of the joint. For reliable supply of AMF threaded studs and tailored technical advice, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and availability Technical data Article number: 4000833258NW Brand: AMF Standard: DIN 6379 Product type: Threaded stud Dimensions / Core data Thread: M12 Total length: 63 mm Width: 15 mm Packaging unit: 1 Features / Material treatment Heat treatment: tempered to property class 10.9 Label: Stiftschraube DIN6379 M12x63mm vergütet auf 10.9 AMF Addition: b: 32 FAQ What does property class 10.9 mean for the threaded stud? Property class 10.9 indicates the stud is quenched and tempered to a high-strength condition, giving the AMF threaded stud improved tensile and yield behaviour suitable for demanding bolted joints. Is the M12 thread compatible with standard nuts and tapped holes? Yes, the M12 thread on the AMF stud conforms to metric thread standards and is compatible with standard M12 nuts and tapped holes produced to metric tolerances. Which standard governs the dimensions and requirements of this fastener? The component is manufactured to DIN 6379, which defines the dimensional and mechanical requirements applicable to this type of threaded stud. What is the total length and which part is threaded? The total length is 63 mm; the specification lists thread size as M12 and the overall dimension as 63 mm for fitting and clamping calculations. How is the item supplied and what is the packaging unit? The product is supplied in packaging unit 1 as indicated by the product data (SKU 4000833258NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Stud Bolt M16 Hardened 8.8 DIN 6379, Pack 1 - AMF
Take advantage of a standardised design and high tensile rating to secure reliable clamping and fast replacement cycles; the combination of DIN 6379 conformity and tempered class 8.8 strength supports durable joints in industrial assemblies. Order the AMF set screw directly via Metav Werkzeuge or consult the team for specification assistance. Set screw DIN 6379 M16×63 mm, tempered to 8.8 — AMF A set screw DIN 6379 M16×63 mm designed for secure clamping in mechanical and assembly applications, offering standard geometry and hardened strength for repeatable performance DIN 6379 standardised geometry Metric thread M16 for common fittings Tempered to class 8.8 for high strength Overall length 63 mm, precise fit Reliable standard geometry for easy replacement Compliance with DIN 6379 ensures consistent form and fit across batches and suppliers, which simplifies spare-part management and reduces assembly errors. The M16 thread matches widely used metric fastenings, enabling straightforward integration into existing machinery and fixtures. With an overall length of 63 mm and a width of 19 mm, the component provides defined seating and engagement depth; the additional dimension b: 32 clarifies the critical insertion or shoulder measure for design checks. This standardised profile helps maintenance planners and buyers streamline procurement and limit machine downtime by enabling direct swaps without rework. Strength class and material treatment for durable joints The screw is tempered to 8.8, a designation that indicates a medium-high tensile class suitable for demanding clamping tasks. This heat treatment increases resistance to shear and thread stripping under load while retaining necessary ductility for safe assembly. Specifying a fastener with this hardness class reduces the risk of premature failure in environments with cyclic loads or vibration. AMF’s production under recognised standards contributes to consistent mechanical properties, which supports process reliability and predictable service life for fixtures, dies and bolted assemblies. Practical benefits for procurement and workshop use Standardisation and clear technical data accelerate specification checks and stock-keeping. The item is identified by SKU 4000833271NW, packaged as packing unit 1, and listed with the DIN reference for traceability. Using standard set screws cuts complexity in the bill of materials and reduces the variety of spares to be kept on the shelf. For engineers and workshop managers, this means fewer interruptions during repairs and a more transparent replacement workflow. Documentation-ready details allow rapid verification in procurement systems and support quality audits. For robust, standard-compliant fastening select the AMF set screw from Metav Werkzeuge — contact Metav Werkzeuge for specification advice or to place an order: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 4000833271NW Product type: Set screw Manufacturer: AMF Standard: DIN 6379 Data Thread: M16 Overall length: 63 mm Width: 19 mm Addition b: 32 Packing unit: 1 Special features Tempered to class 8.8 Standardised geometry for interchangeability AMF brand FAQ What does the DIN 6379 designation mean for fit and interchangeability? DIN 6379 specifies the standardised geometry and dimensions, so the set screw conforms to expected seating and thread profiles for consistent replacement and reliable fit. Is this fastener suitable for high‑load clamping applications? The set screw is tempered to class 8.8, which provides elevated tensile properties appropriate for many high‑load clamping tasks where medium‑high strength is required. Which dimensions are critical when checking compatibility with an existing assembly? Key dimensions are the M16 thread, the overall length of 63 mm, the width 19 mm, and the additional measure b: 32, which together determine engagement depth and seating. How is the product identified for ordering and stock control? The part is listed under SKU 4000833271NW and supplied in packing unit 1, supporting clear ordering and inventory tracking. Does the manufacturer or supplier provide traceability to the standard? Documentation and classification under DIN 6379 and the stated tempering to class 8.8 provide the necessary references for quality records and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Stud Screw M6 Hardened Class 8.8 DIN 6379 - AMF
Take advantage of a DIN-specified fastening solution that pairs DIN 6379 conformity with property class 8.8 strength — robust, repeatable performance for production and maintenance. The M6 thread and 63 mm overall length provide dependable engagement in common assemblies; order directly via Metav Werkzeuge or consult our specialists for technical clarification. Stiftschraube DIN6379 M6x63mm — Stud screw, quenched and tempered to 8.8 (AMF) A Stiftschraube DIN6379 M6x63mm designed for secure mechanical fastening in machinery, fixtures and general workshop applications. DIN 6379 standardised design Tempered to property class 8.8 M6 thread for common fastenings 63 mm overall length for deep engagement Consistent fit through standardised design Conformity with DIN 6379 ensures a consistent geometry that simplifies procurement and replacement in industrial settings. Standardisation means interchangeability across batches and suppliers, reducing inspection time and easing inventory management. The stud screw geometry supports predictable torque and clamping behaviour, which helps maintenance teams restore assemblies quickly and maintain process continuity. Strength and longevity from heat treatment Heat treatment to property class 8.8 delivers a balance of tensile strength and ductility suitable for many structural fastening tasks. This condition indicates a quenched and tempered low-alloy steel, providing superior fatigue resistance compared with untreated fasteners. The result is improved component life and fewer unscheduled stoppages, meaning less downtime and more reliable production throughput. Practical dimensions for everyday assemblies With an M6 thread and 63 mm overall length, this fastener suits a wide range of mechanical and workshop applications where medium-strength joints are required. The stated width of 9 mm supports conventional tightening tools and sockets, granting straightforward assembly and disassembly during maintenance cycles. Such dimensional clarity reduces the risk of selecting incompatible fasteners and supports efficient workshop workflows. Supply reliability and application advantages Specifying a DIN-compliant, heat-treated fastener reduces material uncertainty and supports quality assurance procedures. The AMF designation denotes the originating brand, while the clear specification facilitates procurement and inspection processes. Choosing this type of stud screw helps maintain consistent clamping forces and predictable service intervals, contributing to safer, more efficient plant operation. For tailored procurement or application advice contact Metav Werkzeuge in Emmerich — our team can confirm suitability for specific assemblies and advise on logistics via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4000833243NW Label: Stiftschraube DIN6379 M6x63mm vergütet auf 8.8 AMF Product type: Stiftschraube Key dimensions Thread: M6 Overall length: 63 mm Width: 9 mm Packaging unit: 1 Special features DIN 6379 compliant Tempered to property class 8.8 (quenched and tempered) Brand: AMF Additional note: Addition: b: 40 FAQ What standard does this stud screw comply with? This fastener is specified to DIN 6379, ensuring standardised geometry and interchangeability for AMF stud screws (SKU 4000833243NW). What does property class 8.8 mean for application? Property class 8.8 indicates the screw is quenched and tempered, offering a balance of tensile strength and ductility suitable for many structural fastening tasks. Is the M6 thread suitable for general machinery assemblies? Yes, the M6 thread and 63 mm overall length are typical for general machinery and workshop assemblies where medium-strength joints are required. How is the stud screw packaged and supplied? The item is supplied in a packaging unit of 1, as indicated for SKU 4000833243NW. Can this fastener be used for repeated maintenance operations? The DIN conformity and heat treatment make this stud screw appropriate for repeated assembly and disassembly in maintenance routines, providing predictable clamping behaviour. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm T-Slot Bolt 12mm M12 Grade 10.9 With Nut And Washer DIN 787 - AMF
Reliable, high-strength clamping for T-slotted tables: the combination of M12 engagement and Grade 10.9 performance delivers secure fixation and reduced rework in production environments — order via Metav Werkzeuge or consult our specialists for application matching. T-slot bolt DIN 787 — T-slot 12 mm, M12 thread, 63 mm, Grade 10.9 (AMF) The T-slot bolt DIN 787 is a high-strength fastener designed for secure clamping in T-slotted machine tables and fixture systems. Conforms to DIN 787 M12 metric thread T-slot width 12 mm Grade 10.9 high strength Durable clamping with reduced risk of failure Fasteners manufactured to Grade 10.9 provide elevated tensile properties compared with standard bolts, offering a dependable clamp under dynamic loads. The combination of a metric M12 thread and heat-treated strength class results in a tight joint that resists loosening and deformation during frequent setup changes. This translates into fewer interventions and longer periods of uninterrupted production when secure workholding is essential. Precision fit for T-slotted tables and fixtures Compliance with DIN 787 ensures a standardised shoulder and head geometry for insertion into T-slot 12 mm rails, so components seat consistently and without lateral play. The 63 mm overall length allows for sufficient thread engagement in typical clamping stacks, helping to maintain preload and prevent thread stripping. Explaining the standard in plain terms helps planners and buyers match the fastener to machine table profiles and clamping elements confidently. Practical dimensions and assembly advantages The package includes a mating nut and washer, enabling immediate assembly without sourcing additional components; this simplifies parts logistics and reduces BOM complexity. Precise axial measurements assist with setup calculation: A: 11.7; B: 40; E: 18; K: 7, providing clear guidance for designers and fitters working to tight tolerances. Delivered in single units for direct replacement or trial fit, the bolt supports modular clamping systems and straightforward retrofits. For specification advice or to secure reliable supply of AMF T-slot bolts, contact Metav Werkzeuge GmbH in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930; our specialists will assist with technical matching, availability and delivery options. Technical data Article number: 4000833310NW Description: T-slot bolt DIN 787 T-Nut 12mm M12 L.63mm Grade 10.9 with nut and washer AMF Brand: AMF Facts Thread: M12 T-slot width: 12 mm Overall length: 63 mm Packaging unit: 1 Axial dimensions: A: 11.7; B: 40; E: 18; K: 7 Special features Conforms to DIN 787 Grade 10.9 high strength Includes nut and washer Designed for 12 mm T-slots FAQ What standard does this fastener meet? The bolt complies with DIN 787; the AMF T-slot bolt (SKU 4000833310NW) is manufactured to that standard for consistent head and shoulder geometry. What thread and slot size are specified? Thread is M12 and it is intended for a 12 mm T-slot; these dimensions suit common machine table profiles and clamping fixtures. Does the delivery include fastening accessories? Yes — the article description indicates the bolt is supplied with a nut and washer, allowing immediate assembly. What is the overall length and how does it affect clamping? Overall length is 63 mm; this provides sufficient thread engagement for reliable preload in typical clamping stacks. Are detailed dimensional values available for installation planning? Axial dimensions are provided: A: 11.7; B: 40; E: 18; K: 7, which assist in calculating clearances and stacking heights for precise installations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm T-Slot Bolt 18mm T-Slot M16 With Nut And Washer, Grade 8.8 - AMF
Benefit from a robust combination of grade 8.8 tensile strength, precise M16 thread engagement and compatibility with 18 mm T-slots for dependable fixture clamping and reduced setup time; order directly via Metav Werkzeuge or consult our specialists for application advice. AMF T-slot bolt DIN 787 — M16, 18 mm T-slot, 63 mm length A durable AMF T-slot bolt manufactured to DIN 787 for secure clamping in 18 mm T-slots on machine tables and fixture plates. High tensile strength grade 8.8 Compatible with 18 mm T-slots Standard DIN 787 specification Includes nut and washer for assembly Secure clamping that keeps production moving The DIN 787 T-slot bolt delivers a predictable clamping solution with high tensile strength and a standardised head geometry that minimises slippage in machine table grooves. The M16 thread provides strong axial load capacity while reducing the need for frequent retightening; this translates into fewer interruptions during setup and a lower risk of workpiece movement under machining loads. By selecting a fastener with defined mechanical properties, production planners gain a measurable improvement in fixture reliability and process repeatability. Precise fit for standard machine tables and tooling Designed for use in an 18 mm T-slot, the fastener’s dimensions conform to established table and fixture systems, ensuring a consistent fit across compatible tooling. Conformity with DIN 787 means contractors and workshop engineers can rely on interchangeability when replacing or standardising clamping hardware. The defined geometry and thread specification simplify catalogue matching and make integration into tool lists straightforward, helping to speed purchasing decisions and reduce inventory complexity. Ready-to-use assembly reduces installation time Supplied complete with a nut and washer, the bolt is delivered as a ready-to-install fastener, eliminating the need to source separate components and accelerating the clamping process. With a total length of 63 mm, the fastener is suitable for many common clamping setups where a secure threaded engagement is required. The included washer helps distribute clamping forces evenly, protecting softer fixture surfaces and helping to maintain consistent torque readings across repeated assemblies. Practical benefits for workshops and production lines Adopting standardised T-slot fasteners supports lean workshop organisation: fewer unique parts, faster tool changes and a more predictable maintenance schedule. The combination of grade 8.8 strength and metric M16 thread makes the bolt suitable for medium to heavy clamping tasks without overengineering the solution. For planners and shopfloor technicians, this translates into improved uptime and a reliable baseline component for fixture design. For DIN 787-compliant clamping and advice on integrating this AMF T-slot bolt into existing tooling, contact Metav Werkzeuge for expert guidance and prompt supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833336NW Product type: T-slot bolt Standard: DIN 787 Brand: AMF Facts T-slot width: 18 mm Thread: M16 Total length: 63 mm Axite values: A: 17.7; B: 45; E: 28; K: 10 Pack unit: 1 Special features Grade 8.8 strength Includes nut and washer DIN 787 compliant FAQ What T-slot width is this bolt intended for? The bolt is designed for an 18 mm T-slot and matches standard table grooves used in many fixture systems. Which thread size does the fastener use? This fastener features an M16 thread, providing robust engagement for medium to heavy clamping tasks. Is the bolt supplied with assembly parts? Yes, the delivery includes a nut and washer, so the fastener is ready for immediate installation. What standard does the bolt comply with? The component is manufactured to DIN 787, ensuring dimensional compatibility with corresponding T-slot hardware. Can this bolt be used for heavy-duty clamping? With grade 8.8 tensile classification and an M16 thread, the bolt is suitable for many medium to heavy clamping applications where standardised performance is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm T-Slot Screw M10 Strength Class 10.9 With Nut And Washer, DIN 787 - AMF
Take advantage of a DIN‑compliant fastening solution that combines high tensile strength and standardised geometry for secure fixturing; the M10 thread and 63 mm overall length ensure reliable clamping in 10 mm T‑slot systems. Order the bolt via Metav Werkzeuge or consult our technical team for specification matching. T‑Slot Bolt DIN 787 — T‑slot 10 mm, M10 x 63 mm (AMF) The T‑Slot Bolt DIN 787 M10 x 63 mm is a high‑strength fastening element for machine tables and modular fixturing, designed to sit and lock securely in 10 mm T‑slots for precision clamping. DIN 787 standardised geometry Grade 10.9 high tensile strength Supplied with nut and washer Durable, standardised clamping for demanding fixtures The bolt meets DIN 787, providing a standardised profile that simplifies component selection and ensures compatibility across many clamping systems. Manufactured to Grade 10.9, the fastener delivers higher yield and tensile properties compared with lower grades, which translates into greater clamping security and fewer retightening cycles. For operations that demand repeatable locating and minimal play, the standard geometry reduces setup time and helps maintain machining tolerances during production runs. Fast and reliable assembly with included accessories Equipped with an M10 thread and a total length of 63 mm, the fastener suits a wide range of table plates and clamping stacks. The scope of delivery includes a nut and washer, enabling immediate installation without sourcing additional parts and reducing assembly steps. The combined dimensions are optimised for direct use in 10 mm T‑slot channels, improving throughput during fixture changes and decreasing machine downtime through quick, dependable fastening. Designed for industrial workshop efficiency and compatibility The T‑slot design is intended for repetitive clamping in production and maintenance contexts where consistency and robustness matter. Compatibility with a 10 mm T‑slot makes the fastener suitable for common milling tables and modular fixture systems. The component’s standardisation supports inventory rationalisation and procurement efficiency, while the high‑grade specification contributes to a longer service life under cyclic loads. Where traceable conformity and predictable behaviour under load are required, this solution supports dependable workshop workflows. For expert guidance on integrating AMF T‑slot bolts into existing fixturing systems, contact Metav Werkzeuge for personalised advice and supply from our Emmerich location. Technical data Article number: 4000833306NW Norm: DIN 787 Product type: T‑slot bolt Brand: AMF Core dimensions T‑slot size: 10 mm Thread: M10 Overall length: 63 mm Grade: 10.9 Packing unit: 1 Features & additions Supplied with nut and washer Axial additions: A: 9.7; B: 45; E: 15; K: 6 FAQ Is this fastener suitable for standard 10 mm T‑slots? Yes. The fastener is specified for a 10 mm T‑slot and is manufactured to DIN 787 dimensions to ensure fit and function in standard T‑slot systems. What are the thread type and total length of the bolt? The bolt features an M10 thread with an overall length of 63 mm, designated under article number 4000833306NW. Does the scope of delivery include fastening accessories? Yes. The product is supplied complete with a nut and washer to enable immediate assembly. What strength class does the bolt have? The fastener is specified as Grade 10.9, offering high tensile and yield performance suitable for demanding clamping applications. Is the component suitable for repeated fixture changes in a production environment? Yes. The standardised geometry and high‑grade specification support reliable repeated clamping and reduced setup time in production workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6mm T-Slot Nut M5 DIN 508, Height 8mm - AMF
Take advantage of standardised compatibility, compact dimensions and high tensile class for secure, repeatable clamping in workshop fixturing. Order the AMF component directly via Metav Werkzeuge or consult our specialists for application advice. T-Nutenstein DIN 508 T-Nut 6mm M5 AMF — standardised T-slot nut with M5 thread T-Nutenstein DIN 508 T-Nut 6mm M5 AMF is a compact, DIN‑compliant slot nut designed for secure clamping in 6 mm T‑slot systems and industrial fixturing DIN 508 standardised component 6 mm T-slot compatible M5 internal thread High strength class 10 Reliable, standardised fastening that reduces setup time The DIN 508 conformity ensures predictable fit and interchangeability in a wide range of clamping rails and machine tables. With a 6 mm T-slot interface and an M5 thread, the component allows rapid assembly with common fastening hardware, shortening set‑up cycles and lowering machine downtime. This standardisation supports efficient inventory management and simplifies procurement for maintenance and production teams. Robust strength for demanding clamping tasks Designed with strength class 10, the part provides elevated tensile strength for repeatable clamping forces in everyday shop use. The listed axial parameters (A: 5.7; E: 10; K: 4) indicate the measured performance characteristics that support reliable force transmission under load. Such mechanical consistency reduces the need for frequent replacement and contributes to stable machining setups in both prototyping and small‑series production. Compact height for low‑profile fixtures and precise positioning At an 8 mm height, the nut offers a low-profile solution for fixtures where vertical clearance is limited. The reduced profile helps avoid interference with workpieces while maintaining firm thread engagement via the M5 bore. This physical compactness is particularly beneficial for modular clamping systems and jigs where space optimisation and exact positioning are priorities. Practical choice for workshops and industrial users As a straightforward fastening element, the slot nut combines easy handling with technical reliability. Its clear specification supports planners and buyers in selecting compatible parts for retrofit or new builds without time‑consuming compatibility checks. Paired with Metav’s quality filter and broad product range, the component becomes part of a dependable supply chain solution for trades, maintenance departments and small industrial operations. For secure, standardised workholding, select the AMF T‑slot nut via Metav Werkzeuge or request tailored advice from Metav Werkzeuge’s application consultants. Technical data Article number: 4000833200NW Label: T-Nutenstein DIN 508 T-Nut 6mm M5 AMF Manufacturer: AMF Product type: T-Nutenstein Packaging unit: 1 Facts Height: 8 mm T-slot width: 6 mm Thread: M5 Standard: DIN 508 Strength class: 10 Axial values: A = 5.7; E = 10; K = 4 Special features DIN 508 compliant For 6 mm T-slots Internal M5 thread Strength class 10 Compact, low-profile design FAQ Is this part suitable for standard 6 mm T-slots? Yes. The T-Nutenstein DIN 508 T-Nut 6mm M5 AMF is specified for 6 mm T-slots and is manufactured to DIN 508 tolerances for compatibility with standard rails. What does strength class 10 mean for workshop use? Strength class 10 denotes a high tensile rating for the slot nut, so the AMF T-slot nut delivers robust clamping performance and durability in routine fixturing applications. Can the component be used with common M5 bolts? Yes. The internal M5 thread is compatible with standard M5 bolts and fastening hardware used in clamping and machine table assemblies. How does the 8 mm height affect installation in fixtures? The 8 mm height provides a low-profile solution that minimises interference while ensuring sufficient thread engagement for secure fastening within compact fixtures. What reference identifies the part for ordering? Order using article number 4000833200NW; the product is listed as T-Nutenstein DIN 508 T-Nut 6mm M5 AMF for clear identification. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70-100mm Screw Vise No. 6400 Flat Support, Max Load 100 N - AMF
Take advantage of a compact, adjustable support that combines a max. load of 100 with a flat support plate and a precise TR 30 x 4 thread for reliable workshop clamping; order the component directly via Metav Werkzeuge or consult our advisors for setup recommendations. AMF Screw clamp Nr. 6400 - 100 — adjustable height 70–100 mm, flat support AMF Screw clamp Nr. 6400 - 100 provides an adjustable clamping support for fixtures and general workshop use, suited to repeatable setups and stable part support Adjustable height 70–100 mm range Flat support plate for stable contact TR 30 x 4 precision thread Max. load 100 for secure holding Stable support for repeatable clamping The adjustable height of 70–100 mm allows controlled positioning of components during machining and assembly, reducing rework and set-up time. The flat support design delivers consistent contact across workpieces, which improves repeatability. Built for workshop environments, this clamping support converts thread movement into reliable vertical adjustment, enabling straightforward alignment with fixtures. The compact construction in size Gr.100 keeps the footprint small while maintaining the necessary contact surface for stable holding. Precision mechanics for consistent setups A TR 30 x 4 thread provides coarse, dependable pitch for fast adjustment and secure locking under load. With diameters D1 50 mm and D2 50 mm, the component offers standardised interfaces for integration into existing clamping fixtures and subplates. These dimensions support accurate height control and mechanical stability, making the part suitable for routine production environments where tolerance to variation must be minimised. The functional design focuses on motion control and long-term mechanical integrity. Capacity and application versatility Rated with a max. load of 100, the device is sized to support a wide range of workshop tasks without over-specification. The flat support surface and the adjustable spindle make it suitable for fixture building, jigs and general support duties in metalworking and light assembly. Supplied as a single unit, the component is pragmatic for replacement or for incremental upgrades of existing clamping systems. Selected where straightforward, mechanical solutions are preferred, the construction emphasises robustness and ease of integration. Secure the AMF screw clamp via Metav Werkzeuge for dependable delivery from Emmerich — enquiries: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000833115NW Type: Nr. 6400 - 100 Brand: AMF Product: Screw clamp Packaging unit: 1 Facts Max. load: 100 Thread: TR 30 x 4 H min: 70 mm H max: 100 mm D1: 50 mm D2: 50 mm Special features Flat support plate Size Gr.100 Compact adjustable support FAQ What height range does the clamp cover? The AMF screw clamp Nr. 6400 - 100 has an adjustable height range from 70 mm to 100 mm. What thread specification is used for adjustment? Adjustment is via a TR 30 x 4 thread, providing coarse, reliable pitch for height changes. What load can the support carry? The device is rated for a maximum load of 100, suitable for a variety of workshop support tasks. Are the support diameters compatible with standard fixtures? Yes, the clamp features D1 50 mm and D2 50 mm dimensions allowing integration with common fixture interfaces. Is the component supplied as a single unit? The product is supplied in a packaging unit of 1 and is intended for direct installation into existing clamping setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
72mm Extension Nut M24 SW36 40mm Corner Dimension - AMF
Benefit from a compact combination of secure M24 thread extension and a 36 mm spanner face with a 72 mm overall height for reliable connection extensions in assembly work. Order or request application advice via Metav Werkzeuge to ensure seamless integration into production processes. Extension Nut No. 6334 M24 — M24 thread, 36 mm spanner face (AMF) The Extension Nut No. 6334 M24 is an M24 thread extension nut designed to extend threaded connections and provide a defined engagement length for assembly and repair tasks. M24 thread for secure fastening 36 mm spanner width (SW 36) Overall height 72 mm for thread extension Secure thread extension where strength matters The M24 specification gives a clear, standardised basis for compatibility with M24 bolts and studs, enabling a dependable thread extension without rework. Using the extension nut reduces the need to replace long components and helps maintain clamping force where original threads are worn or inaccessible. The defined 72 mm overall height creates predictable engagement length, which supports consistent torque transmission and contributes to stable joint integrity in repetitive assemblies. Fast, tool-compatible installation for workshop efficiency Fitting requires only a standard 36 mm spanner, which simplifies maintenance and lowers machine downtime. The single-tool installation removes complexity from assembly sequences and shortens set-up times, offering a measurable improvement in throughput. This straightforward procedure translates into time savings during regular servicing and enables quicker turnaround in production and repair environments without specialised tooling. Predictable integration and process reliability Designed as a practical component for workshop and industrial use, the part supports predictable assembly outcomes and helps avoid process interruptions. The clear specification of thread size and spanner face reduces selection errors during procurement and at the bench, improving workflow reliability. Where repeatability matters, this extension nut provides a consistent mechanical connection that aligns with common workshop practices and standard torque procedures. Contact Metav Werkzeuge for technical clarification on fitment, stock availability or to discuss how the AMF Extension Nut No. 6334 M24 suits specific applications Technical Data SKU: 4000833433NW Type: No. 6334 - M24 Label: Verlängerungsmutter Nr. 6334 M24 SW 36mm AMF Product type: Extension nut UID: 4000833433NW Dimensions & Key figures Overall height: 72 mm Spanner width: 36 mm Packaging unit: 1 Features & Applications M24 thread engagement SW 36 spanner face Addition: corner size 40 FAQ What thread size does this extension nut use? The AMF extension nut uses an M24 thread specification suitable for extending M24 threaded connections and ensuring secure fastening. Which tool is required to fit the part? A 36 mm spanner (SW 36) is required to tighten or loosen the extension nut; the SKU for reference is 4000833433NW. What is the overall height and why does it matter? The overall height is 72 mm, which determines the additional engagement length provided by the extension nut and helps ensure predictable clamp performance. Is the component intended for workshop and industrial assemblies? Yes — the AMF extension nut No. 6334 M24 is designed for workshop and industrial use where a standardised thread extension and reliable mechanical connection are required. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.4mm Bore DIN 6340 Washer For M8, Thickness 4mm - AMF
A reliable DIN‑standard washer offering a precise 8.4 mm bore and 4 mm thickness for secure M8 fastening; ideal where conformity and consistent clamping behaviour matter. Order directly via Metav Werkzeuge or consult its specialists for procurement and supply-chain guidance. AMF U-washer DIN 6340 — Washer for M8 screws, bore Ø 8.4 mm, 4 mm thick AMF U‑washer DIN 6340 is a standardised washer designed to ensure consistent fastening performance in general assembly and maintenance applications DIN 6340 standard-compliant washer Precision bore Ø 8.4 mm for M8 fasteners 4 mm thickness for reliable clamping Outer diameter D2 23 mm for load distribution Consistent fastening through standard conformity Compliance with DIN 6340 guarantees repeatable dimensions and interchangeability across batches, reducing variability in assembly lines. The defined bore and form tolerance minimise axial play around M8 threads, which in turn lowers the risk of uneven torque transfer and subsequent loosening. For procurement and quality managers, standard conformity translates directly into fewer rejects and more predictable joint behaviour during routine inspections and torque-controlled assembly. Dimension-driven benefits for secure joints The combination of a 8.4 mm internal bore and 4 mm plate thickness provides a balance between ease of fitting and effective load-bearing. The specified outer diameter D2 23 mm spreads compressive forces over a larger contact area, helping to prevent embedment where clamping faces are softer. As a result, fastenings exhibit improved seating and reduced creep under cyclic loads, which is especially relevant for repetitive maintenance tasks and medium‑duty assemblies that rely on consistent clamp force rather than bespoke shimming. Practical integration into procurement and inventory Packaged as single units and identified by SKU 4000833436NW, this washer simplifies stockkeeping and traceability. Clear labelling and the adherence to a recognised norm make it straightforward to match components to work instructions and bill of materials. The product is a pragmatic choice for workshops and purchasing departments seeking a standardised component that streamlines procurement, reduces the need for multiple processed part numbers and supports predictable reordering from a trusted European supplier network. Recommended: Source the AMF U‑washer through Metav Werkzeuge for consistent supply and consulting on compatibility — contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for ordering and technical clarification Technical data Article number: 4000833436NW Label: U-Scheibe DIN 6340 f.Schrauben M8 Bohrungs-D.8,4mm AMF SKU / UID: 4000833436NW Facts Standard: DIN 6340 Bore diameter (D1): 8.4 mm Outer diameter (D2): 23 mm Thickness (S): 4 mm Suitable for: M8 Packaging unit: 1 Design / Special features Product type: Washer (Unterlegscheibe) Brand: AMF Intended application: fastening and load distribution FAQ What standard does this washer follow? The washer is manufactured to DIN 6340, ensuring standardised dimensions and interchangeability for M8 applications. Is this washer suitable for M8 bolts? Yes, the internal bore of 8.4 mm is specified for use with M8 fasteners. What are the key dimensions to check when specifying this washer? Relevant dimensions include the bore D1 8.4 mm, outer diameter D2 23 mm and thickness S 4 mm. How is the product identified for ordering and stock? This item is listed under SKU 4000833436NW for straightforward procurement and inventory control. Can this washer improve joint stability in repeated assemblies? The combination of the specified bore, thickness and outer diameter supports consistent seating and improved load distribution, which aids joint stability under repeated assembly cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80-110mm Screw Vice With Flat Rest And Magnetic Base, 100kg Capacity, 30x4 Thread - AMF
Product data error: the manufacturer "AMF" is not listed among the authorised manufacturers provided; please supply a valid manufacturer from the approved list to ensure compliance with the specified requirements and avoid any potential delays or issues in processing the product data, as it is essential to adhere to the approved list of manufacturers to maintain accuracy and reliability in the system, ensuring that all entries meet the necessary standards and guidelines set forth for proper validation and approval, which is a critical step in maintaining the integrity and functionality of the overall process.
80mm 18mm T-Slot Screw M16 Grade 8.8 With Nut And Washer, DIN 787 - AMF
Robust fastening for fixture tables: the T-slot bolt DIN 787 combines standard-compliant design and a metric M16 thread with an 80 mm length for secure clamping, supplied complete with nut and washer; order directly via Metav Werkzeuge or consult the technical advisors for specification support. AMF T-slot bolt DIN 787 — 18 mm T-slot, M16 × 80 mm AMF T-slot bolt DIN 787 for machine tables and fixture systems, designed to secure workpieces and tooling in 18 mm T-slots. DIN 787 standardised design Suitable for 18 mm T-slot rails Metric M16 thread for strong clamping Supplied with nut and washer Secure clamping that fits standard fixtures The T-slot bolt is produced to DIN 787 dimensions and is intended for industrial and workshop fixture systems where repeatable positioning is required. The combination of an M16 thread and an 80 mm overall length provides a reliable grip through standard clamping plates and fixtures; this ensures consistently low setup times and stable fixation during machining or assembly, improving cycle-time efficiency. Compatibility with 18 mm T-slot rails reduces the need for custom adapters and supports quick integration into existing systems. High-strength performance for demanding applications Manufactured for strength and operational reliability, the fastener is specified as grade 8.8 in the product label, indicating a hardened steel class suited to medium- to high-load clamping tasks. The inclusion of a nut and washer in the delivery supports even pressure distribution and reduces the risk of loosening under vibration. Where repeatable torque application is required, this bolt’s mechanical rating allows predictable clamping forces and contributes to a safer, more stable production environment. Clear dimensions and quick verification at the workbench Critical dimensions are provided for rapid assessment and installation. The head and shank geometry (A: 17.7 mm, B: 55 mm, E: 28 mm, K: 10 mm) enables verification against fixture drawings and ensures the bolt seats correctly in the 18 mm T-slot. Such explicit measures assist in planning tooling layouts and avoiding assembly errors; the standardised geometry also simplifies inventory management by matching established fixture specifications. For reliable fixtures using AMF components, contact Metav Werkzeuge for ordering or technical clarification — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833337NW Manufacturer: AMF Product type: T-slot bolt Standard: DIN 787 UID: 4000833337NW Key dimensions T-slot width: 18 mm Thread: M16 Overall length: 80 mm Axite dimensions: A 17.7 mm; B 55 mm; E 28 mm; K 10 mm Features Supplied with nut and washer Grade: 8.8 (as stated in label) Packaging unit: 1 Label: T-Nutenschraube DIN 787 T-Nut 18mm M16 L.80mm Güte 8.8 m.Mutter u.Scheibe AMF FAQ What T-slot size does this bolt fit? The AMF T-slot bolt DIN 787 is designed specifically for 18 mm T-slots and matches common fixture table profiles. Is the thread standard metric and what size is it? Yes, the fastener uses a standard metric M16 thread suitable for general fixture clamping applications. What does grade 8.8 indicate for performance? Grade 8.8 denotes a medium-high tensile strength class for steel fasteners; the AMF bolt’s specification supports reliable clamping under substantial loads while maintaining predictable elongation and torque behaviour. Are nut and washer included with the bolt? The delivery includes the corresponding nut and washer, allowing immediate installation and even load distribution across the clamped surface. Does the bolt comply with recognised standards for interchangeability? Compliance with DIN 787 ensures dimensional interchangeability with other components designed to the same standard, simplifying replacement and system planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Set Screw DIN 6379 Hardened 8.8, M16 Thread - AMF
Take advantage of a durable, standard-compliant fastener that combines consistent mechanical performance with straightforward installation; the heat-treated property class 8.8 and M16 thread ensure dependable clamping strength for industrial assemblies. Order directly via Metav Werkzeuge or consult Metav’s experts for specification advice and secure supply from their Emmerich facility. Stud screw DIN 6379 – M16 x 80 mm, heat-treated to property class 8.8 (AMF) Stud screw DIN 6379 – M16 x 80 mm, heat-treated to property class 8.8 (AMF) is a purpose-made fastener for load-bearing machine and structural joints, specified to DIN 6379 for repeatable mechanical performance DIN 6379 compliant design Heat-treated to property class 8.8 M16 thread with 80 mm overall length Across-flats tool engagement 19 mm Reliable clamping performance for industrial assemblies The stud screw is manufactured to DIN 6379, delivering a predictable combination of tensile and yield strength thanks to the heat-treated finish at property class 8.8. This material treatment increases load capacity while maintaining ductility, which helps prevent sudden brittle failure in cyclic or dynamic applications. In practice, that means the fastener sustains higher preloads and resists relaxation under vibration—attributes that promote longer service intervals and fewer rework cycles in production lines and maintenance schedules. Clear specification for correct component selection Critical specifications are immediately usable for procurement and engineering documentation: M16 thread, 80 mm overall length and a spanner engagement of 19 mm indicate the intended mating hardware and tool sizes. The part is listed under SKU 4000833272NW and packaged as Packaging unit 1, which simplifies traceability and inventory management. Specifying the fastener by these data points reduces the risk of ordering mismatched items and supports consistent assembly quality across batches. Efficient workshop handling and installation The combination of standard thread sizing and a conventional across-flats dimension enables rapid installation with common workshop tools, reducing downtime during assembly or repair. Because the component adheres to a recognised DIN standard, it integrates smoothly into existing bills of materials and quality checks. The result is improved shop-floor throughput and fewer interruptions caused by atypical fasteners, supporting a leaner workflow in both manufacturing and maintenance contexts. Suitable applications and material compatibility Designed for general steel construction, machinery assembly and repair work, this stud screw is a pragmatic choice where a reliable threaded connection is required. The AMF designation denotes the brand origin; the fastener’s heat treatment to 8.8 offers a suitable balance for medium-duty structural tasks. Where higher hardness classes or corrosion resistance are necessary, selection should be guided by specific environmental and mechanical requirements to ensure optimal longevity. Contact Metav Werkzeuge for tailored advice on integrating this AMF stud screw into production or maintenance planning and to arrange prompt delivery from Emmerich. Technical data Article number: 4000833272NW Label: Stud screw DIN 6379 M16x80 mm heat-treated to 8.8 AMF Manufacturer: AMF Facts Thread: M16 Overall length: 80 mm Width (across flats/tool engagement): 19 mm Packaging unit: 1 Special features Heat-treated to property class 8.8 Compliant with DIN 6379 Product type: Stud screw FAQ What mechanical class does this stud screw have? The stud screw is heat-treated to property class 8.8, providing a balanced tensile and yield strength suitable for many industrial fastening tasks. Is the fastener compliant with recognised standards? Yes, the component is specified to DIN 6379, ensuring dimensional and mechanical conformity for use in standard assemblies. Which thread and length are supplied with this SKU? The item is supplied as an M16 thread with an 80 mm overall length under SKU 4000833272NW. For which applications is this fastener most suitable? This AMF stud screw is suitable for steel construction, machine assembly and maintenance where medium-duty tensile properties and standardised dimensions are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Bolt M10 Heat-Treated Class 10.9 DIN 6379 - AMF
Take advantage of the combination of DIN 6379 compliance, M10 x 80 mm dimensions and tensile class 10.9 for secure, high-strength connections in mechanical and assembly applications; order the stud screw directly via Metav Werkzeuge or ask our consultants for application advice. Stud screw DIN 6379 M10 x 80 mm — high-strength, tempered to 10.9 (AMF) A stud screw DIN 6379 M10 x 80 mm designed for demanding fastening tasks in mechanical assemblies, driven where high clamping force and standard conformity are required High tensile class 10.9 Standard-compliant DIN 6379 M10 thread for standard fittings Hex width 13 mm across flats Robust fastenings where strength matters The combination of a M10 x 80 mm thread and tensile class 10.9 delivers reliable clamp loads for connections that must withstand vibration and dynamic stress. The heat treatment to property class 10.9 means the component maintains a high yield and tensile strength compared with untreated fasteners, reducing the risk of elongation or failure under load. Specified to an industrial standard, this fastening solution supports consistent assembly quality and predictable mechanical behaviour in production environments. Clear standards and predictable compatibility Manufactured to DIN 6379, the fastener ensures compatibility with industry-standard nuts and threaded holes, simplifying parts procurement and inventory management. The M10 thread size is widely used across machines and jigs, enabling straightforward replacement and retrofit operations. Where interchangeability and conformity to engineering drawings are essential, the adherence to DIN 6379 reduces inspection time and supports a smoother approval process in quality-controlled workshops. Practical design for efficient installation With a 13 mm across-flats width and an overall length of 80 mm, the stud is suited to common installation tools and sockets, enabling quick assembly and maintenance. The geometry balances grip and accessibility, which can shorten fixture time on production lines or during on-site servicing. Where torque control is used, the combination of thread form and heat treatment provides predictable torque–tension behaviour, aiding correct preload without excessive settling. Application guidance and material suitability Tempered to property class 10.9, this stud is intended for high-strength steel applications rather than for corrosion-critical environments unless additional surface protection is specified. The product is particularly suitable for mechanical assemblies, frames, and tooling where high clamping force is prioritised. For specific substrate combinations or environmental exposures, specification checks are recommended to confirm suitability and any need for coatings or alternative materials. Procurement reliability and traceable identification Each item is traceable by SKU and designation for streamlined logistics and quality records. Consistent labelling and standard conformity facilitate batch checks and integration into inventory systems. Choosing industry-standard fasteners like this stud supports reduced downtime through easier sourcing of spares and predictable interchangeability across equipment from different suppliers. For secure, high-strength connections and ordering support, contact Metav Werkzeuge for procurement advice and reference SKU 4000833252NW — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance. Technical data Article number: 4000833252NW Designation: Stiftschraube DIN6379 M10x80mm vergütet auf 10.9 AMF Brand: AMF Facts Thread: M10 Overall length: 80 mm Width across flats: 13 mm Packaging unit: 1 UID: 4000833252NW Addition: b: 50 Special features Tempered to property class 10.9 Standard: DIN 6379 Product type: Stud screw FAQ What mechanical strength does this stud provide compared with standard bolts? This stud is heat-treated to tensile class 10.9, providing higher tensile and yield strength than untreated or lower-class fasteners, making it suitable for applications requiring increased clamp force. Is the thread size compatible with common M10 nuts and inserts? Yes, the M10 thread conforms to standard dimensions and mates with conventional M10 nuts and threaded inserts specified for metric fastenings. Can this stud be used in corrosive environments? The item is supplied tempered to class 10.9; corrosion resistance depends on surface finish or coating, which is not specified for this SKU, so additional protection should be considered for corrosive conditions. How is the product identified for ordering and inventory? The stud is referenced by SKU 4000833252NW and the DIN 6379 designation; these identifiers support traceability and correct procurement. What tooling is recommended for installation? A 13 mm across-flats tool or socket matches the stud geometry for safe torque application and efficient installation during assembly or maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Bolt M12 Hardened 10.9, DIN 6379 - AMF
Take advantage of the combination of DIN 6379 compliance, heat treatment to property class 10.9 and standard M12 dimensions for dependable, repeatable fastening in mechanical assemblies; order the AMF stud bolt via Metav Werkzeuge or consult Metav’s technical team for specification advice. AMF stud bolt DIN 6379 M12 x 80 mm – heat-treated to property class 10.9 The AMF stud bolt DIN 6379 M12 x 80 mm is a high-strength fastening component intended for mechanical assemblies, maintenance tasks and industrial repair jobs where standardised threads and certified tensile properties are required. Complies with DIN 6379 standard Heat-treated to property class 10.9 M12 thread for common industrial fittings 80 mm overall length for deep connections Robust connection performance for critical joints The stud is manufactured to DIN 6379, which guarantees interchangeability and predictable mechanical behaviour across assemblies. Heat treatment to property class 10.9 increases yield and tensile strength compared with lower classes, making this stud suitable for demanding bolted joints where service loads are significant. By choosing a component that adheres to an established standard, maintenance planners benefit from faster part selection and reduced downtime when replacements are required. Precise dimensions for reliable assembly and fit With an M12 thread and 80 mm overall length, this stud offers a straightforward fit into standard tapped holes and mating nuts. The supplied nominal width of 15 mm ensures consistent engagement and clamping force when torqued to the appropriate values for class 10.9 fasteners. Clear dimensional data reduces the need for trial fittings and simplifies inventory management thanks to the predictability of thread and length specifications. Practical advantages for procurement and workshop use Standardisation and traceable mechanical properties make stock rotation and quality assurance easier for purchasing and workshop teams. The stud is supplied in a single-piece packaging unit, reducing handling complexity for small maintenance tasks. Compliance with recognised norms supports audits and documentation requirements, while the robust heat treatment reduces the likelihood of premature failure in service, contributing to safer and more reliable installations. For reliable high-strength fastening from AMF order directly via Metav Werkzeuge GmbH or contact Metav’s specialists at info@metav-werkzeuge.com / +49 2822 7131930 for specification support and availability Technical data Article number: 4000833259NW Standard: DIN 6379 Manufacturer: AMF Product type: Stud bolt Facts Thread: M12 Overall length: 80 mm Width: 15 mm Packaging unit: 1 UID: 4000833259NW Special features Heat-treated to property class 10.9 Complies with DIN 6379 Brand: AMF Additional dimension b: 50 FAQ What standard does this stud follow? The stud conforms to DIN 6379, ensuring standardised thread and form for the AMF stud bolt (SKU 4000833259NW). What mechanical class is this fastener? This AMF stud bolt is heat-treated to property class 10.9, providing enhanced tensile and yield performance for demanding applications. Which thread and length are specified? The fastening element is an M12-thread stud with an overall length of 80 mm, suitable for common industrial fittings. How is the product supplied for workshop use? The AMF stud bolt (4000833259NW) is supplied in a single-piece packaging unit for straightforward handling and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Bolt M6 Hardened Grade 8.8, DIN 6379 - AMF
Reliable connection through Grade 8.8 hardness and a standardised M6 thread combine to deliver secure assemblies with consistent clamping force; suitable for industrial fixtures and maintenance work. Order the part directly via Metav Werkzeuge or consult our product advisers for specification matching. Stiftschraube DIN6379 M6x80mm — hardened M6 stud bolt for metric fastening A Stiftschraube DIN6379 M6x80mm designed for secure joins in mechanical and assembly applications, complying with DIN standards and tempered to Class 8.8 for enhanced tensile strength. DIN 6379 standard-compliant Hardened to grade 8.8 Metric thread M6 80 mm overall length Proven strength for industrial fastening The fastener is manufactured to DIN 6379, ensuring dimensional consistency and interchangeability across assemblies. With a M6 metric thread and an 80 mm overall length, the component delivers predictable engagement depth and reliable load distribution. The specified Grade 8.8 tempering indicates a high tensile strength and improved fatigue resistance, making the fastener suitable for repetitive load cycles in production and maintenance environments. This combination reduces downtime by lowering the risk of premature failure and simplifies procurement through standard conformity. Practical compatibility and installation advantages Compatibility with standard metric tooling and thread tolerances reduces set-up time on the shop floor. The stud’s metric thread enables straightforward integration with tapped holes, nuts or coupling components commonly used in mechanical assemblies. Where adjustment or replacement is required, the standardised dimensions support rapid part matching and inventory harmonisation, contributing to a leaner spare-parts strategy. The AMF designation denotes the manufacturer label on the article, assisting traceability and supplier selection. Durable performance and application guidance Tempering to 8.8 enhances yield and tensile limits while preserving machinability for secondary operations where minor thread finishing may be needed. For applications demanding secure, reusable mechanical joints—such as fixture construction, machine rebuilds and conveyor supports—the hardened stud provides consistent clamping behaviour. When specifying for critical joints, pair the stud with matching grade washers and nuts to maintain the assembly’s rated strength and to avoid galvanic or mechanical incompatibilities. For procurements of hardened metric stud bolts and further technical advice on AMF fasteners, contact Metav Werkzeuge for tailored recommendations and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833244NW SKU: 4000833244NW Standard: DIN 6379 Description: Stiftschraube M6x80mm, tempered to 8.8, AMF Measurements / Core data Thread: M6 Overall length: 80 mm Width: 9 Materials / Special features Hardness class: 8.8 Packaging unit: 1 Addition: b: 50 Manufacturer: AMF FAQ What standard does this stud comply with? The stud complies with DIN 6379, ensuring standardised dimensions and interchangeability for metric fastening applications. What are the key mechanical characteristics of this fastener? The stud is tempered to Grade 8.8, providing enhanced tensile strength and good fatigue performance for industrial use. Which thread size is provided and what is the overall length? The fastener features a M6 metric thread and an overall length of 80 mm (SKU 4000833244NW). Is this stud suitable for repeated assembly and disassembly? Yes; the Grade 8.8 temper combined with standard metric threading supports multiple assembly cycles when paired with compatible nuts and washers. How is the article packaged? The article is supplied in a packaging unit of 1. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Bolt M8 Heat Treated 10.9, DIN 6379 - AMF
Benefit from a combination of DIN-compliant specification, high tensile strength and precise dimensions for dependable mechanical assemblies; order the threaded stud directly via Metav Werkzeuge or consult our advisors if technical clarification is required. Threaded stud DIN 6379 M8 x 80 mm, hardened to 10.9 — AMF Threaded stud DIN 6379 M8 x 80 mm, hardened to 10.9 — AMF is a metric fastener designed for secure mechanical joining in industrial and workshop applications. DIN 6379 compliant Hardened to property class 10.9 Metric thread M8 x 80 mm Packaging unit 1 piece Long-term load capacity for high-stress joints The threaded stud is engineered to meet the demands of high-stress mechanical connections by combining standardised dimensions with a strength class of 10.9. The heat treatment to property class 10.9 increases yield and tensile strength, which allows assemblies to resist shear and tensile loads more reliably than untreated fasteners. In practice, this means fewer service interventions and a reduced risk of mechanical failure in critical joints. The conformity to DIN 6379 ensures interchangeability in repair and production environments, simplifying procurement and replacement processes. Precise dimensions that reduce assembly time With a metric thread M8 x 80 mm and a nominal width of 11 mm, the component provides predictable fitment in threaded holes and mating components. The standard thread geometry and overall length are manufactured to tolerances that support consistent torque values during assembly. Consistent dimensions reduce rework and enable faster line-side installation because torqueing procedures and tool settings remain stable across batches. The result is improved production flow and less downtime during assembly changes. Material properties and practical benefits in service Hardened and tempered to reach the specified property class, the fastener exhibits enhanced resistance to deformation under load. This resistance is particularly beneficial where vibration or cyclic loading is present, since the mechanical properties of the material help maintain clamping force over time. The component’s simple geometry—fully threaded stem with standard metric pitch—facilitates predictable load distribution and makes it suitable for a broad range of industrial fastening tasks. Where traceability is required, the clear specification to DIN 6379 supports documentation and verification during quality checks. Supply and ordering reliability for production planning Supplied individually in a packaging unit of 1, the item is suitable for spare-part provisioning, maintenance tasks and small-batch production use without oversupply. The clear SKU and standard specification allow purchasing departments to integrate the part into inventory systems with confidence. Sourcing from an established distribution partner reduces logistics uncertainty and supports just-in-time replenishment strategies, particularly where exact conformity to standards is mandatory for safety or certification purposes. For technical advice or to secure a dependable supply of the AMF threaded stud (DIN 6379, M8 x 80 mm, property class 10.9), contact Metav Werkzeuge for personalised procurement and application support. Technical data SKU: 4000833247NW Product type: Threaded stud Label: Threaded stud DIN 6379 M8 x 80 mm, hardened to 10.9, AMF Numbers / Core technical data Thread: M8 Overall length: 80 mm Width: 11 mm Packaging unit: 1 Special features Standard: DIN 6379 Strength class: 10.9 (heat-treated) Addition b: 50 FAQ What strength class does this stud have? The threaded stud is heat-treated to property class 10.9, providing elevated tensile and yield strength suitable for demanding assemblies. Is the part manufactured to an established standard? Yes, the component conforms to DIN 6379, which ensures standard dimensions and interchangeability for industrial use. Which thread and length are specified for this item? The item features a metric M8 thread with an overall length of 80 mm, as indicated by the product specification and SKU 4000833247NW. How is the fastener supplied for maintenance tasks? The fastener is supplied in a packaging unit of 1, allowing precise replenishment for repairs and small-batch requirements. Can this stud be used where vibration is present? Due to the 10.9 strength class and heat treatment, the stud offers improved resistance to deformation, making it suitable for applications subject to vibration and cyclic loads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Screw DIN 6379 Hardened Grade 8.8, M20 Thread - AMF
Take advantage of the combination of standardised DIN 6379 geometry, a metric M20 thread and property class 8.8 strength for reliable medium‑duty assemblies; order directly via Metav Werkzeuge or consult our advisers for specification matching. Stud bolt DIN 6379 M20x80 mm — heat-treated to 8.8, AMF A Stud bolt DIN 6379 M20x80 mm designed for secure, repeatable fastening in machinery and equipment where standard conformity and predictable mechanical behaviour are required. DIN 6379 standardised geometry Property class 8.8, heat‑treated Thread M20 for metric assemblies Overall length 80 mm, shank b = 32 mm Reliable strength for medium‑duty fastening tasks Manufactured to DIN 6379, the fastener delivers consistent form and fit, while the 8.8 property class denotes a heat‑treated component suited to medium‑duty connections. Such classification ensures a dependable balance between tensile strength and ductility, which reduces the risk of unexpected failure under typical assembly loads. The result is a fastener that supports predictable performance in recurring maintenance and production environments, lowering downtime and rework. Predictable fit and easy installation with metric standards The M20 metric thread and the defined shank dimension b = 32 mm provide compatibility with common nuts and threaded holes used across industrial applications. Compliance with the DIN specification simplifies procurement and assembly planning because mating parts can be selected with confidence. The clear geometric definition reduces assembly variability, shortens installation times and supports consistent torque application during tightening. Practical logistics and assured sourcing for workshops Supplied by the brand AMF and offered as an individual unit, the component is suitable for replacements and small batch assemblies where single items are required. Sourcing via Metav Werkzeuge benefits from a European quality filter and centralised stock management, enabling reliable supply to workbenches and workshops. The SKU and standard reference help to integrate the component into inventory systems and maintenance lists for streamlined operations. Contact Metav Werkzeuge for specification advice and secure supply of AMF stud bolts directly from our Emmerich warehouse Technical data Article number: 4000833282NW Product type: Stud bolt Brand: AMF Standard: DIN 6379 Thread: M20 Overall length: 80 mm Width: 27 mm Shank b: 32 mm Packaging unit: 1 Facts Thread size: M20 Length: 80 mm Width: 27 mm Shank b dimension: 32 mm Pack: 1 piece Special features Heat‑treated to property class 8.8 Metric DIN standardised geometry Suitable for repeatable industrial assemblies FAQ Does this fastener conform to a recognised standard? Yes. The item is produced in accordance with DIN 6379, ensuring standardised geometry and interchangeability for metric assemblies. What does property class 8.8 indicate for the stud bolt? Property class 8.8 means the fastener is heat‑treated to provide elevated tensile strength and yield characteristics suitable for medium‑duty fastening tasks where reliable mechanical performance is required. What are the key dimensions to check for compatibility? Key dimensions are M20 thread, overall length 80 mm, width 27 mm and a shank section b = 32 mm; reference the SKU 4000833282NW when cross‑checking mating parts. Is the component sold individually or in bulk? This item is supplied as a single unit (packaging unit: 1), which is practical for replacement parts or small assembly runs. Can the stud bolt be used in machinery and equipment assemblies? Yes. The combination of standard conformity and property class makes it suitable for many machinery and equipment fastening applications; however, specific load and safety calculations should follow the relevant engineering guidelines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com