400mm Dowel Screw M24x400 Heat Treated 8.8, DIN 6379 - AMF
Take advantage of a standardised, high-strength fastening solution that combines conformity with DIN 6379, robust M24 threading and heat treatment to property class 8.8 for reliable joint integrity; order via Metav Werkzeuge or consult their technical advisers for specification support. AMF stud bolt DIN 6379 — M24 × 400 mm, property class 8.8 A AMF stud bolt DIN 6379 M24 x 400 mm, heat-treated to property class 8.8, designed for secure bolted connections in mechanical and structural assemblies Stud bolt to DIN 6379 standard Heat-treated to property class 8.8 M24 metric thread for high-strength fastening 400 mm overall length for deep assemblies Engineered for dependable, high-strength joints The stud is manufactured to the DIN 6379 specification, ensuring repeatable geometry and compatibility with standard M24 components. Heat treatment to property class 8.8 provides defined mechanical properties and improved fatigue resistance compared with untreated fasteners. These characteristics translate into consistent clamp force and reduced risk of connection loosening in demanding applications, supporting predictable maintenance intervals and reliable operational uptime. Dimensions and thread form that speed up assembly With an M24 metric thread and an overall length of 400 mm, the stud is suitable for deep fittings where standard-length fasteners are insufficient. The long engagement length enables secure thread engagement without extensions, while compatibility with standard M24 nuts and washers simplifies procurement and reduces the number of bespoke parts required. The result is a leaner assembly process with fewer handling steps and less downtime during installation. Proven quality and supply continuity for workshops Produced by a recognised industrial supplier and offered through Metav’s distribution, the fastener is intended for industrial and workshop environments where traceability and consistent quality matter. Sourcing via a supplier with a quality filter in Emmerich supports steady availability and batch consistency. The component’s specification and conformity to standards help maintain safety margins in structural and mechanical joints, offering long-term confidence in both new builds and retrofit projects. Contact Metav Werkzeuge for specialist advice on AMF stud bolts and to secure supply from the Emmerich warehouse — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and availability Technical data Article number: 4000603368NW Manufacturer: AMF Product type: Stud bolt Standard: DIN 6379 Designation: M24 x 400 mm, property class 8.8 Measurements Thread: M24 Overall length: 400 mm Width: 35 mm Materials & features Heat-treated to property class 8.8 Pack unit: 1 Additional note: Addition: b: 250 FAQ What does property class 8.8 mean for the stud bolt? Property class 8.8 indicates a heat-treated steel fastener with elevated mechanical properties; the AMF stud bolt in property class 8.8 is designed for higher tensile and yield strength than non-heat-treated equivalents, suitable for structural and mechanical load-bearing joints. Is this stud bolt compatible with standard M24 nuts and washers? Yes, the stud has an M24 metric thread and is designed to mate with standard M24 nuts and washers for conventional fastening arrangements. For which applications is the 400 mm overall length intended? The 400 mm overall length suits deep assemblies and situations where extended thread engagement is required, such as long flanges, stacked components or retrofits that exceed standard fastener lengths. Does the product conform to any recognised standard? The fastener complies with DIN 6379, providing standardised dimensions and tolerances for use in industrial and workshop applications. What information does the SKU 4000603368NW provide? SKU 4000603368NW uniquely identifies this AMF stud bolt variant (M24 x 400 mm, property class 8.8) for ordering and inventory tracking purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Stud Bolt M20 Grade 8.8 Heat Treated, DIN 6379 - AMF
Take advantage of a combination of robust tensile performance, standardised DIN conformity and long reach for dependable bolted joints in machinery and structural assemblies; order the required stud bolts directly via Metav Werkzeuge or contact our consultants for selection support. Stud bolt DIN 6379 M20x400 mm, tempered to 8.8 (AMF) A Stud bolt DIN 6379 M20x400 mm engineered for secure threaded connections in industrial machinery and structural applications, supplied as a single piece and finished to property class 8.8 Stud bolt DIN 6379, M20×400 mm Tempered to property class 8.8 High tensile strength for heavy-duty use Supplied as single piece, SKU 4000833288NW Reliable joining for heavy-duty assemblies The Stud bolt DIN 6379 M20x400 mm provides a straightforward, standardised solution for long-span threaded connections. Compliance with DIN 6379 ensures consistent thread geometry and dimensional accuracy, which simplifies assembly with matching nuts and threaded components. The long 400 mm overall length allows for clamping thick flanges or multiple component stacks without resorting to special fasteners, while the M20 thread delivers a proven interface for high-load bolting tasks. This results in fewer part numbers to manage and a predictable bolted-joint behaviour under operational loads. Material treatment and what property class 8.8 delivers Tempering to property class 8.8 denotes a heat-treated steel fastener with elevated mechanical performance compared with untreated carbon steels. The tempering process increases yield and tensile capacity and improves resistance to plastic deformation under load, which is particularly relevant where repetitive or dynamic forces occur. Specifying a tempered fastener reduces the likelihood of elongation or loss of clamp force in service. For customers less familiar with fastener grades, property class 8.8 is commonly chosen where a balance of strength and ductility is required for industrial applications. Practical installation and suitable applications The threaded stud is designed for use where a through-bolt or double-ended stud is preferable: repair work, machinery assembly, gearbox mounting and structural clamping are typical use cases. With an M20 thread, standard nuts and washers can be paired to achieve the required clamping force; torquing must follow the assembly specifications appropriate to property class 8.8 components to ensure joint integrity. The single-piece supply simplifies inventory and traceability, and the long reach of the component removes the need for extensions or splicing in most configurations. For advice on selecting AMF stud bolts or for procurement assistance with tempered M20×400 mm studs, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and our specialists will support the specification and delivery Technical data Article number / SKU: 4000833288NW Brand: AMF Standard: DIN 6379 Facts Thread: M20 Overall length: 400 mm Width: 27 mm Packaging unit: 1 Special features Tempered to property class 8.8 Product type: Stud bolt Addition: b: 250 FAQ What does the DIN 6379 designation mean for the component? DIN 6379 refers to the German standard that defines dimensions and geometry for this type of stud bolt, ensuring compatibility with mating parts and interchangeability in industrial assemblies. Is the M20×400 stud ready to install with standard nuts? Yes, the M20 thread on this stud bolt matches standard M20 nuts and washers; the long 400 mm length accommodates thick assemblies or multiple stacked components. How is the product supplied and how can it be identified? The AMF stud bolt is supplied as a single piece and can be referenced by SKU 4000833288NW for ordering and inventory purposes. What are the benefits of the tempering to property class 8.8? Tempering to property class 8.8 enhances the fastener's strength and resistance to permanent deformation, making it suitable for heavy-duty and cyclic load applications where reliable clamp retention is required. Can the stud bolt be used for structural applications? The stud's conformity to DIN 6379 and its 8.8 tempering make it suitable for many structural and machinery applications; specific use should follow project engineering standards and torque specifications to ensure joint safety. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Clamping Tool Kit M14 x 16 40-Piece, Universal Clamping Accessories - AMF
Robust clamping performance combined with a comprehensive component kit speeds fixture set-up and reduces changeover time; the M14 x 16 compatibility and the 40-piece assortment ensure secure, repeatable clamping. Order the set directly via Metav Werkzeuge or request consultant support for fixture planning. AMF Clamping Tool Set Nr. 6532 (M14 x 16) — 40-piece The AMF Clamping Tool Set Nr. 6532 is a complete clamping solution for T‑slot fixture systems, supplying essential screws, pads and jaws for secure workpiece holding in machining and assembly. 40-piece complete clamping set M14 x 16 T-slot compatibility Includes universal clamping pads Gr. 2 & 3 DIN-spec hex nuts and washers included Faster fixture set-up and less downtime The 40-piece kit is organised to accelerate fixture assembly: the combination of M14 x 16 T-slot screws, assorted lengths and clamping jaws enables quicker positioning and fewer tool changes. Using standardised T‑slot hardware reduces time spent selecting parts and lowers the risk of mismatched components, which translates into a measurable increase in throughput. The practical assortment promotes modular clamping layouts, so fixture changes become a predictable, repeatable process rather than an interruption to production. Components engineered for consistent clamping force Key metal parts conform to established standards and contribute to reliable clamp behaviour. The kit contains hex nuts M14 (DIN 6330 B) and washers M14 (DIN 6340) that ensure even load distribution and corrosion-resistant contact surfaces where applicable. DIN-spec fasteners simplify procurement and maintenance, and the standardisation supports consistent torque application across clamping points. Stable clamping force improves machining accuracy and reduces rework cycles. Adaptable scope for varied workshop tasks The assortment includes universal clamping pads in two sizes and clamping bars of different lengths, providing flexibility for diverse workpiece geometries. With clamping jaws 14 x 100 mm and 14 x 160 mm, plus a mix of T-slot screw lengths (63, 100 and 160 mm), the set supports both small fixtures and larger setups. This adaptable scope reduces the need for multiple specialised kits and helps streamline storage and inventory management in the tooling cupboard. Clear parts breakdown for easy planning and replenishment The set’s documented content allows quick assessment of remaining life and replacement needs: stud screws, extension nuts and standard fasteners are listed to enable straightforward reorders of the exact items required. The organised composition supports purchasing consolidation and long-term workshop reliability, while the robust selection of components helps maintain fixture integrity over repeated cycles, contributing to predictable machining outcomes. Discuss fixture layout and part selection with Metav Werkzeuge to optimise use of the AMF 40-piece clamping kit; contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833101NW Item designation: Clamping tool set Nr. 6532 Manufacturer: AMF Packaging unit: 1 Facts T-slot size: M14 x 16 Content: 40 pieces Packaging unit: 1 Special features 4 × universal clamping pad, size 2 4 × universal clamping pad, size 3 2 × clamping jaw 14 × 100 mm 2 × clamping jaw 14 × 160 mm 2 × T-slot screw 63 mm 4 × T-slot screw 100 mm 4 × T-slot screw 160 mm 2 × stud screw 100 mm 2 × stud screw 160 mm 6 × hex nut M14 DIN 6330 B 6 × washer M14 DIN 6340 2 × extension nut M14 FAQ What is included in the clamping kit? The AMF Clamping Tool Set Nr. 6532 contains a 40-piece assortment of pads, jaws, T-slot screws, stud screws, hex nuts and washers as listed in the special features; SKU 4000833101NW identifies the exact composition. Which T-slot size does the set support? The kit is configured for M14 x 16 T-slot systems and includes matching T-slot screws in several lengths to accommodate different slot depths and fixture profiles. Are standardised fasteners included for consistent torqueing? Yes, the set includes hex nuts M14 (DIN 6330 B) and washers M14 (DIN 6340) to support uniform torque application and repeatable clamping results. What jaw lengths are provided for larger workpieces? Two clamping jaw lengths are supplied: 14 × 100 mm and 14 × 160 mm, allowing accommodation of both compact and extended clamp configurations. Is the assortment suitable for modular fixture design? The range of pads, jaws and screw lengths in the kit supports modular clamping layouts and flexible fixture planning for varied machining operations. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Stud Screw M6 Heat-Treated Grade 8.8, DIN 6379 - AMF
Take advantage of metric compatibility and standard conformity combined with hardened performance for dependable fastening in production and maintenance work; the combination of DIN 6379 compliance, M6 thread and property class 8.8 delivers consistent mechanical integrity. Order the part directly via Metav Werkzeuge or consult our technical team for application-specific advice. AMF Stud screw DIN 6379 M6 x 40 mm, tempered to 8.8 AMF Stud screw DIN 6379 M6 x 40 mm, designed for metric assemblies where standardised strength and repeatable fit are required DIN 6379 standard conformity Property class 8.8 strength Thread M6 for metric assemblies 40 mm overall length Reliable strength for secure mechanical joints The product adheres to the DIN 6379 specification and is tempered to property class 8.8, which indicates a quenched-and-tempered finish intended for demanding fastening tasks. This treatment improves tensile performance and wear resistance, offering a reliable solution where shear and clamp forces are relevant. The result is a fastening component that reduces risks of premature failure and supports longer service intervals in workshop and light-industrial environments. Precision thread and consistent dimensions for easy installation Manufactured with a M6 metric thread and an overall length of 40 mm, the component provides predictable engagement with matching nuts and threaded holes. Metric conformity simplifies part selection across common assemblies, while dimensional consistency minimises rework and fitting time. The controlled geometry supports accurate torque application and repeatable clamping, which benefits both assembly-line efficiency and maintenance operations that rely on dependable interchangeability. Practical choice for production, maintenance and stock consolidation As a standardised fastening element, this AMF stud screw is suitable for general mechanical assemblies in workshops, plant maintenance and small-scale production. The simple specification aids inventory management and reduces procurement complexity, while sourcing via Metav ensures a European quality filter and steady supply. For purchasers aiming to consolidate suppliers without compromising on conformity, this component supports streamlined logistics and straightforward replacement strategies. For guaranteed conformity and reliable supply, request the AMF stud screw via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for specification checks and availability. Technical Data Article number: 4000833241NW Product: Stud screw (Stiftschraube) Brand: AMF Standard: DIN 6379 Core specifications Thread: M6 Overall length: 40 mm Width: 9 mm Packaging unit: 1 Material and features Tempered to property class 8.8 Label: Stiftschraube DIN6379 M6x40mm vergütet auf 8.8 AMF Additional dimension b: 20 FAQ What standard does this component comply with? The component is specified to DIN 6379, confirming its geometry and production tolerances for the intended application. What is the thread and size of the part? This stud screw uses an M6 metric thread and an overall length of 40 mm, as stated on the AMF product label (SKU 4000833241NW). What does property class 8.8 mean for performance? Property class 8.8 denotes a hardened finish suitable for higher-strength applications; the tempering process improves load-bearing capacity and wear resistance. Can this part be used in industrial maintenance tasks? Yes, the metric design and standard conformity make it appropriate for routine maintenance and general mechanical assemblies where DIN 6379 components are specified. Is the part supplied individually or in bulk packs? The technical data lists a packaging unit of 1, indicating single-piece supply for this SKU. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm T-Slot Bolt M10 Strength Class 10.9, DIN 787 - AMF
Take advantage of the combination of industrial standard conformity, M10 compatibility and grade 10.9 strength for dependable fixture clamping; order directly via Metav Werkzeuge or consult the team for specification advice. T-slot screw DIN 787 — 10 mm T-slot, M10 x 40 mm (AMF) The T-slot screw DIN 787 is a high-strength clamping fastener designed for securing fixtures and tooling in 10 mm machine table T-slots. DIN 787 standard for industrial compatibility High-strength grade 10.9 for secure clamping M10 metric thread for standard tooling Fits 10 mm T-slots, overall length 40 mm Consistent clamping force through recognised standardisation The use of the DIN 787 specification ensures a predictable interface between table, clamp and fastener, reducing setup variance across repeated assemblies. Manufactured to grade 10.9, the screw offers high-strength characteristics that translate into greater clamp preload and less loosening under vibration; this is particularly relevant for medium- to heavy-duty machining where steady holding power matters. The metric M10 thread provides broad compatibility with standard clamping hardware and makes replacement straightforward when maintenance is required. Precise fit in 10 mm T-slots for repeatable setups A precise geometry for the 10 mm T-slot combined with an overall 40 mm length gives a reliable engagement depth for clamps and support elements, promoting repeatable positioning of workpieces. The head and shank geometry create a secure mechanical seat inside the slot, which limits lateral play and supports accurate fixturing. For workshop planners and production engineers, this means shorter setup times and fewer adjustments between jobs, contributing directly to process efficiency and uptime. Reliability and integration for workshop use Built to perform as part of standard fixturing systems, this fastener supports modular clamping concepts and integrates easily with existing tooling plates and clamps. The robust mechanical properties reduce the frequency of fastener replacements, helping to maintain a steady production rhythm. Sourcing through an established distributor further ensures consistent supply and traceability, which aids quality control processes and procurement planning in assembly and machining environments. For procurement or technical advice on AMF grade 10.9 T-slot screws, contact Metav Werkzeuge for tailored support and supply information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000603196NW Standard: DIN 787 Product: T-slot screw Thread: M10 T-slot size: 10 mm Length: 40 mm Strength class: 10.9 Manufacturer: AMF Packaging unit: 1 Dimensions & measurable data Addition A: 9.7 Addition B: 30 Addition E: 15 Addition K: 6 Special features Metric thread for standard fixtures Conforms to DIN 787 for interchangeability High-strength class for secure clamping Suitable for machine table fixturing FAQ What T-slot size does this screw fit? This T-slot screw fits a 10 mm T-slot and is dimensioned for reliable seating in that slot size. What does grade 10.9 signify for this fastener? Grade 10.9 indicates a high-strength fastener class; the AMF T-slot screw in 10.9 offers elevated tensile strength and improved clamp retention compared with lower classes. Is the thread standard metric M10? Yes, the screw uses an M10 metric thread, ensuring compatibility with common nuts and clamping components. Can this screw be used for heavy-duty clamping on machine tables? The high-strength class and DIN 787 conformity make this screw suitable for demanding fixturing tasks on machine tables. What is the overall length and how does it affect fixture selection? The overall length is 40 mm, which determines the maximum clamping thickness and should be matched to clamp and workpiece stack-up. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42-52mm Screw Vice Nr. 6400 Group 52 Flat Base Load Capacity 100, TR 30 x 4 - AMF
Take advantage of a compact clamping solution that combines a flat support and a height-adjustable range of 42–52 mm for consistent, repeatable positioning in jig and fixture setups; order directly via Metav Werkzeuge or ask the consultants for assistance. AMF Screw Clamp Block Nr. 6400 - 52 — flat support, height 42–52 mm AMF Screw Clamp Block Nr. 6400 - 52 is a compact clamping element designed for precise, repeatable fixation in production fixturing and workshop jigs; suitable where stable support and reliable thread-driven adjustment are required Flat support for secure clamping Height adjustable 42–52 mm Trapezoidal thread TR 30 x 4 Max. load capacity 100 Consistent clamping accuracy for repetitive production The clamp block offers a height-adjustable range (H min. 42 mm to H max. 52 mm) that enables fine vertical alignment when integrating into fixtures or machine tables. Thanks to the trapezoidal thread TR 30 x 4, movement is smooth and backlash is reduced compared with standard metric threads, which supports repeatable positioning during series work. This mechanical precision reduces set-up time and ensures that fixtures keep their reference points across repeat operations, improving throughput and process reliability. Robust mechanics that simplify maintenance and integration Constructed for workshop use, the component features equal-diameter mounting interfaces (D1: 50 mm, D2: 50 mm) that make it straightforward to seat and replace in modular clamping systems. The defined maximum load capacity (100) provides a clear performance threshold for design calculations and safety margins in jig construction. The screw-driven concept preserves clamping force under cyclic loads and requires minimal maintenance: routine inspection of the thread and lubrication keeps the unit operational with low downtime, supporting consistent production cycles. Practical benefits for engineering and tooling teams As a compact clamping element, the block reduces the complexity of bespoke fixtures while retaining flexibility for multiple part families. The flat support allows broad contact with workpieces where surface stability matters, while the screw adjustment enables controlled force application without relying on hydraulic or pneumatic systems. For engineering teams, integration is straightforward: the unit’s clear mechanical parameters permit fast CAD modelling and simple verification of clamping geometry, shortening the development loop for new jigs and reducing the iterative trial phase. For precision clamping and practical workshop integration, request supply details and technical advice from Metav Werkzeuge regarding the AMF screw clamp block Nr. 6400 - 52 (SKU 4000833113NW) — support and delivery are coordinated from Emmerich. Technical data Article number / SKU: 4000833113NW Type: Nr. 6400 - 52 Product type: Screw clamp block Manufacturer: AMF Packaging unit: 1 Facts Max. load capacity: 100 Thread: TR 30 x 4 Height min.: 42 mm Height max.: 52 mm D1: 50 mm D2: 50 mm Special features Flat support Trapezoidal thread for low backlash Size: Gr. 52 FAQ What applications suit this clamp block best? The AMF screw clamp block Nr. 6400 - 52 is intended for fixture and jig clamping in workshop and light industrial settings where a flat support and height adjustment (42–52 mm) are required for stable part positioning. How is vertical adjustment achieved on this unit? Vertical adjustment is provided via the trapezoidal thread (TR 30 x 4) built into the AMF screw clamp block, allowing controlled and repeatable movement between the specified height limits. Which mounting dimensions must be considered when integrating the block into a fixture? The block has two mounting diameters (D1: 50 mm and D2: 50 mm) that should be matched to locating bores or seats in the fixture layout to ensure secure installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
44-Piece Clamping Tool Set M16 x 18, Universal Vices, Clamping Bars, T-Slot Bolts - AMF
Take advantage of the kit's compatibility with M16 x 18 T‑slots and the comprehensive selection of clamp pads, clamping bars and T‑slot screws to speed up fixture set‑up; order directly via Metav Werkzeuge or ask our consultants for application advice. AMF Clamping Tool Set No. 6532 — 44‑piece M16 x 18 T‑slot kit The AMF Clamping Tool Set No. 6532 is a comprehensive clamping kit for modular T‑slot fixturing on machine tables, engineered for use with M16 x 18 slots. AMF clamping set No. 6532, 44 pieces Compatible with M16 x 18 T‑slots Includes universal clamping pads and clamping bars Full T‑slot hardware: screws, nuts and washers Fast, secure T‑slot clamping for machine tables The clamping kit supports repeatable, mechanical fixturing on standard machine tables with M16 x 18 T‑slot geometry. Using a matched set of T‑slot screws, hex nuts M16 and washers M16 ensures a secure, torqueable connection between workpiece and table, which reduces slippage and rework. For workshop planners this means shorter set‑up times and more predictable machining cycles, because the modular parts are designed to engage directly with the slot profile common in milling and boring machines. Versatile component range to reduce set‑up time A varied component selection enables flexible clamping strategies without ad‑hoc fabrication. The kit contains a mix of universal clamping pads, clamping bars in two lengths and multiple T‑slot screws, so different workpiece geometries can be held with minimal additional parts. Keeping the most‑used lengths and pads in one kit simplifies toolroom inventory and speeds changeovers; fewer searches for odd items translates into measurable gains in shopfloor productivity. Sized parts for repeatable, adjustable fixtures Contents include standardised elements such as clamp bars 18 x 125 mm and 18 x 200 mm, T‑slot screws in 63, 100 and 160 mm lengths, stud bolts 125 and 200 mm, and fastening hardware to DIN specifications. These specific lengths are chosen to cover common workpiece heights and allow safe clamping across a range of setups. The presence of extension nuts M16 and DIN‑rated hex nuts and washers supports secure preloading and repeatable torque application, which is especially valuable where precise clamping force affects machining accuracy. Practical benefits for production and maintenance workshops The kit suits production shops, toolrooms and maintenance departments that require quick, modular fixturing for small to medium batches. The standardised hardware reduces the need for bespoke clamps, while the assortment allows for both rapid prototyping and predictable series work. Integration into existing fixturing regimes is straightforward thanks to the focus on widely used M16 x 18 slot dimensions and DIN‑compatible fasteners, making the set a pragmatic addition to any machine shop's clamping inventory. For tailored application advice or to discuss delivery and availability of the AMF Clamping Tool Set No. 6532, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt consultancy and ordering support Technical data Article number: 4000833102NW Model: No. 6532 Product: Clamping tool set Brand: AMF Facts Pieces: 44 T‑slot: M16 x 18 Packaging unit: 1 Special features 4 x universal clamping pad size 2 4 x universal clamping pad size 3 2 x clamping bar 18 x 125 mm 2 x clamping bar 18 x 200 mm 2 x T‑slot screw 63 mm 4 x T‑slot screw 100 mm 4 x T‑slot screw 160 mm 2 x stud bolt 200 mm 4 x stud bolt 125 mm 6 x hex nut M16 DIN 6330 B 6 x washer M16 DIN 6340 4 x extension nut M16 FAQ What T‑slot size is the set designed for? The kit is designed specifically for M16 x 18 T‑slots and delivers matched fasteners and accessories for reliable engagement. Which components are included in the AMF Clamping Tool Set No. 6532? The AMF Clamping Tool Set No. 6532 contains universal clamping pads (two sizes), clamping bars, a range of T‑slot screws, stud bolts and DIN‑specified nuts and washers to cover typical fixture requirements. Is the assortment suitable for both single‑piece and small batch production? Yes, the set’s mix of pad sizes and screw lengths makes it suitable for single‑piece set‑ups and repeatable small batch production without frequent retooling. Can the T‑slot screws and nuts be used with other clamping systems? The included T‑slot screws and M16 nuts conform to standard DIN dimensions and can be integrated with other T‑slot based clamping systems that accept M16 x 18 interfaces. How does this kit help reduce setup time on the machine table? By providing a ready combination of pads, bars and fasteners, the kit reduces the need to source individual parts during set‑up, enabling faster, more consistent fixture assembly on the machine table. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm M30 Hex Nut Swaged And Milled Strength Class 10, DIN 6331 - AMF
Combine robust DIN 6331 compliance with strength class 10 and precise dimensions (M30, SW 46, 45 mm height) for reliable clamping in demanding industrial assemblies; order the AMF hexagon nut directly via Metav Werkzeuge or consult our technical advisors if specification help is required. AMF Hexagon Nut DIN 6331 M30 – Strength Class 10, SW 46 A Hexagon Nut DIN 6331 M30 engineered for secure clamping in heavy-duty flanged and shaft connections across industrial and workshop applications Conforms to DIN 6331 standard Strength class 10 for high load resistance Wrench size SW 46 for precise torque application Total height 45 mm, corner 51.3 mm Reliable performance for heavy-duty assemblies The combination of DIN 6331 conformity and strength class 10 offers a clear technical advantage where high clamping force and fatigue resistance matter. The threaded M30 form provides a standardised interface for shafts and studs, while the robust mechanical class ensures predictable behaviour under tension and shear. For procurement and engineering teams, this means fewer unexpected failures, longer maintenance intervals and simplified component qualification in safety‑critical joints. Precision dimensions reduce setup and adjustment time Consistent geometry—notably the wrench size SW 46, overall height 45 mm and corner measurement 51.3 mm—ensures repeatable seating and even load distribution on the mating surfaces. Precise face and corner dimensions minimise the need for shims or secondary machining and allow torque tools and socket drives to seat correctly first time. That dimensional reliability translates directly into quicker assembly cycles and reduced downtime during maintenance. Robust production and traceable standards for dependable supply Manufactured by AMF with a pressed and milled finish, the component delivers flat bearing faces and defined edge geometry for secure tool engagement. The construction and finishing process support stable clamping behaviour and resistance to fretting at the contact surfaces. For projects requiring traceability, the item is identified by SKU 4000603337NW and supplied singly in the stated packaging unit; Metav Werkzeuge’s procurement team can confirm batch and inspection data on request, ensuring compatibility with quality management procedures. Contact Metav Werkzeuge for specification guidance and reliable supply of AMF hexagon nuts (M30, strength class 10) from Emmerich — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to request technical documentation or delivery options Technical data Article number: 4000603337NW Product type: Hexagon nut Standard: DIN 6331 Manufacturer: AMF Package unit: 1 Core dimensions Thread size: M30 Wrench size: 46 mm Total height: 45 mm Corner measurement: 51.3 mm Features Strength class 10 Pressed and milled finish Suitable for industrial clamping and flange connections Labelled SW 46 for tool compatibility FAQ Which standard does this nut conform to? The Hexagon Nut DIN 6331 M30 conforms to the DIN 6331 standard, ensuring standardised dimensions and interchangeability. What indicates the load capability of this component? The AMF hexagon nut (M30) is rated strength class 10, which denotes high tensile and shear capacity for demanding assemblies. Which spanner or socket size is required for assembly? The specified tool size is SW 46 (46 mm), matching the nut’s wrench flats for correct torque application. What are the principal dimensions to check for installation? Key dimensions are thread M30, overall height 45 mm, and corner measurement 51.3 mm for clearance and seating considerations. How is the surface finished and what does that mean in practice? The nut is pressed and milled, providing flat bearing faces and precisely defined edges that improve tool engagement and reduce the need for secondary machining Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
48mm Extension Nut M16 SW24mm Corner Size 26.8 - AMF
Take advantage of a reliable thread extension that combines M16 compatibility with a 24 mm spanner size for straightforward assembly and maintenance. The 48 mm overall height provides increased reach where additional thread length is required; order directly via Metav Werkzeuge or consult our advisors for application-specific advice. Extension nut No. 6334 M16 (AMF) — 24 mm spanner, 48 mm height A Extension nut No. 6334 M16 engineered to extend threaded connections in mechanical assemblies and workshop fixtures for improved accessibility and secure fastening. M16 thread compatibility Spanner size 24 mm Overall height 48 mm Increase assembly flexibility with a standard M16 solution The extension component offers a simple mechanical solution when original bolt length is insufficient. By providing an additional threaded section compatible with M16 fittings, the component removes the need for bespoke fasteners or temporary workarounds. The standardised geometry and 24 mm spanner width make it compatible with common tools, reducing preparation time and streamlining assembly operations. This results in measurable efficiency gains during maintenance or retrofit tasks. Minimise downtime through straightforward handling and fit Designed for quick integration into existing assemblies, this extension nut ensures consistent clamping behaviour and predictable torque application. The 48 mm overall height supplies the extra engagement required for secure joints without compromising access for tools. Where repeatability matters, the regularised dimensions support reproducible results across multiple assemblies, helping to cut rework and keep production or workshop schedules on track. Proven practicality for workshop and industrial use Manufactured by AMF, the extension nut combines robust design with everyday usability. The precise corner measure and standard spanner width ensure reliable tightening and a reduced risk of rounding during service. For engineers and technicians seeking a pragmatic component to restore or extend thread length, this part provides a balance of precision and convenience compatible with standard clamping and fastening practices. For tailored advice on integrating this AMF extension nut into a specific assembly or to request a quotation, contact Metav Werkzeuge for expert guidance and reliable supply — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833428NW Type: Nr. 6334 - M16 Name: Extension nut No. 6334 M16 SW 24mm AMF Manufacturer: AMF Product type: Extension nut Facts Overall height: 48 mm Spanner width: 24 mm Corner dimension: 26.8 mm Packing unit: 1 UID: 4000833428NW Special features Thread size: M16 Corner measurement (addition): 26.8 mm Standard spanner compatibility: SW 24 mm AMF brand component FAQ What thread size does the extension nut support? The extension nut supports an M16 thread and is supplied as extension nut No. 6334 from AMF. Which tool fits the nut for assembly? A 24 mm spanner is specified for the nut, matching the SW 24 mm designation on the product. How much additional length does the component provide? The component has an overall height of 48 mm, giving a predictable increase in usable thread length for assemblies. Is this suitable for industrial retrofit applications? Yes, the extension nut No. 6334 M16 by AMF is intended for mechanical assemblies and workshop fixtures where extra thread engagement is required. How is the part packaged? The item is supplied with a packing unit of 1. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Fork Clamp Bar Slot B26mm For M24 Screw DIN 6315B - AMF
Benefit from a fork-style clamping bar built to DIN 6315B with a 26 mm slot and 500 mm overall length for secure M24 screw clamping and stable setups; this configuration streamlines fixture preparation and improves repeatability on the workshop floor. Order the clamping bar directly via Metav Werkzeuge or consult our advisors for specification support. Fork-style clamping bar (Gabelspanneisen) DIN 6315B — 26 mm slot, 500 mm — AMF The Fork-style clamping bar DIN 6315B is a precision clamping accessory designed for robust fixturing and long-reach applications, intended for use with an M24 clamping screw. Fork-style design for secure clamping DIN 6315B standardised compatibility 26 mm slot width for M24 clamping screw 500 mm overall length for long reach Faster setups through standardised compatibility Compliance with DIN 6315B ensures straightforward integration into existing fixturing systems, reducing the time spent selecting compatible parts. The 26 mm slot is sized for an M24 clamping screw, which simplifies procurement and lowers the risk of mismatched components. For production environments where quick changeovers and consistent alignment matter, the standardised interface delivers reduced setup time and repeatable positioning without the need to alter fixture geometry. Secure, repeatable clamping with extended reach The fork-style configuration concentrates clamping forces at two prongs, improving stability under load while maintaining accessibility to the workpiece. With a 500 mm overall length the bar provides long reach for larger or awkwardly placed components, enabling clamping closer to the machining area and reducing the need for secondary supports. The result is improved precision during operations that demand consistent contact pressure and minimal movement. Practical workshop integration and inventory benefits Supplied in a single packing unit, the bar is suited to standard clamping setups and simplifies inventory management for maintenance and production departments. The plain, standardised design supports modular fixturing concepts, allowing quick pairing with commonly used clamping screws and fixtures. By choosing components that match established norms, workshop planners achieve smoother ordering, fewer downtime risks and a leaner supplier landscape. For assured DIN 6315B compatibility and reliable delivery, contact Metav Werkzeuge to specify and proc ure the AMF fork-style clamping bar — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and order processing. Technical data Article number: 4000603053NW Type: Fork version (Gabelausführung) Standard: DIN 6315B Product type: Clamping bar (Spanneisen) Brand: AMF Facts Slot width: 26 mm Overall length: 500 mm Suitable for: M24 clamping screw Packaging unit: 1 Special features Fork-style execution Slot for 26 mm clamp Axial enrichment: A: 50; B2: 66; B3: 20; B4: 10 DIN 6315B compatible FAQ What does the DIN 6315B designation mean for this clamping bar? DIN 6315B denotes the standardised interface and dimensions that the fork-style clamping bar (Spanneisen) 4000603053NW by AMF adheres to, ensuring compatibility with fixtures manufactured to the same specification. Which clamping screw size fits this fork-style clamping bar? The fork-style clamping bar is designed for an M24 clamping screw, matching the 26 mm slot profile to provide a secure connection. How does the 500 mm length affect workshop applications? The 500 mm overall length offers extended reach for larger workpieces, allowing clamping closer to the machining area and reducing the need for additional supports when using the AMF clamping bar. Is the fork-style clamping bar suitable for modular fixturing systems? Yes, the standardised DIN 6315B interface and common M24 compatibility make this bar well suited to modular fixturing concepts and standard workshop toolsets. What is included in the delivery for SKU 4000603053NW? Delivery consists of the clamping bar as a single unit (packaging unit: 1); additional clamping screws or fixture components are not included unless specified separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Fork Jaw Clamp DIN 6315B 22mm Slot For M20/M22 Screw - AMF
Take advantage of the fork‑type design, the 22 mm slot and the 500 mm overall length for stable, standardised clamping in fixture systems; order the component directly via Metav Werkzeuge or consult the Metav team for tailored selection and application advice. AMF Fork Clamping Bar DIN 6315B — Fork‑type clamping bar with 22 mm slot, 500 mm length The AMF Fork Clamping Bar DIN 6315B is a fork‑type clamping component for fixture and bench systems, designed to accept standard M20 and M22 clamping screws and to integrate with DIN‑compliant tooling. Fork‑type design for secure clamping 22 mm slot for standard mounting 500 mm overall length for extended reach Reliable clamping for precision fixtures The fork‑type geometry, specified to DIN 6315B, ensures a predictable engagement with clamping hardware and a secure clamping interface. The 22 mm slot provides a standard contact area that aligns with common fixture bars, enabling consistent force transfer when paired with M20 or M22 clamping screws. This standardisation reduces variability in repetitive setups and supports stable machining or assembly processes without the need for custom adapters. Fast integration with standard screw systems A 500 mm overall length combines reach with stable leverage, allowing integration across longer jaws and multiple clamping points. The length supports flexible positioning within a clamping layout and reduces the number of separate components required for extended fixtures. Compatibility with M20 and M22 thread sizes simplifies procurement and spare‑part management, contributing to reduced setup time and smoother changeovers between jobs. Practical workshop benefits and traceability Specification conformity and a clear SKU facilitate stock control and traceability in production environments. The clamping bar is listed under SKU 4000603051NW, supplied as a single unit, and marked for use in standardised systems. The fork execution offers a reliable mechanical interface for recurring fixturing tasks, supporting efficient workflows and predictable maintenance cycles while easing parts management in the workshop. For selection assistance or to secure this AMF fork clamping bar for specific fixtures, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 and request guidance from the Metav consultants. Technical data SKU: 4000603051NW Product type: Clamping bar (fork design) Standard: DIN 6315B Dimensions & compatibility Slot width: 22 mm Overall length: 500 mm Compatible with clamping screws: M20, M22 Features & applications Product category: Clamping bar Packaging unit: 1 Manufacturer: AMF FAQ What thread sizes are compatible with this clamping bar? The AMF fork clamping bar is compatible with M20 and M22 clamping screws, as stated in the technical specification. Does the bar conform to an industry standard? Yes, conformity to DIN 6315B is specified, which ensures interchangeability with other components designed to the same standard. What is the overall length and how does it affect fixturing? The overall length is 500 mm, providing extended reach for larger jaws or multiple clamping positions in a fixture layout. Can the SKU be used for stock and reorder purposes? SKU 4000603051NW is provided for ordering and inventory management to ensure correct identification and traceability. How is the product delivered in terms of packaging? The item is supplied as a single unit, with a packaging unit of 1 for straightforward handling and storage. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Stud Bolt M16 Forged 8.8 Heat Treated DIN 6379 - AMF
Take advantage of a robust combination of recognised standard compliance and high tensile strength for dependable, repeatable jointing in production and maintenance environments; secure supply and technical advice via Metav Werkzeuge for streamlined procurement and reliable delivery. AMF stud bolt (DIN 6379) — M16 x 500 mm, property class 8.8 A AMF stud bolt (DIN 6379) designed for load-bearing threaded connections in machinery, structural assemblies and mechanical engineering applications. DIN 6379 standard compliant stud bolt Property class 8.8, heat treated for strength M16 thread, 500 mm total length Hexagon width 19 mm for standard tools High-strength fastening for industrial assemblies The DIN 6379 conformity signals a production and inspection regime aligned with industrial expectations, while the 8.8 property class denotes a heat treated carbon steel fastener engineered for elevated tensile and yield performance. As a stud bolt, this component provides axially reliable clamping where bolt-and-nut connections are required; fatigue resistance is improved by the tempering process, which translates into longer service intervals and fewer unscheduled maintenance stops. Traceable manufacturing and consistent mechanical properties reduce assembly variability and support predictable safety margins in static and semi-dynamic loads. Precise dimensions for predictable installation Featuring an M16 metric thread and a 500 mm total length, the component is specified for applications demanding significant grip length or through-bolt arrangements. The hexagon 19 mm across flats ensures compatibility with common spanners and torque tools, enabling controlled tightening with standard industrial equipment. Clear dimensional conformity simplifies parts matching with existing assemblies and minimises rework; where accurate clamp length and thread engagement are critical, the defined geometry assists in achieving the required preload without guesswork. Suitable uses and procurement reliability for workshops Manufactured for durable mechanical joints, this stud is suitable for heavy machinery, plant construction and maintenance tasks that require secure threaded connections under load. The single-piece supply format supports just-in-time replacement of worn studs or targeted spares stocking. Procurement through an experienced distributor ensures quality filtering and logistical reliability: Metav provides centralised access to precision components and can assist in part selection for compatibility with existing assemblies and standards. Reliable sourcing reduces the risk of mismatched components and supports uninterrupted production. For secure, high-strength assemblies specify the AMF stud bolt (DIN 6379, M16 x 500 mm) and contact Metav Werkzeuge in Emmerich for technical clarification and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4000603418NW Standard: DIN 6379 Designation: Stud bolt M16 x 500 mm Brand: AMF Facts Thread: M16 Total length: 500 mm Width across flats: 19 mm Property class: 8.8 Special features Heat treated to property class 8.8 Suitable for load-bearing threaded joints Packaging unit: 1 Addition: b: 315 FAQ Is this stud suitable for structural applications? Yes. The stud complies with DIN 6379 and the 8.8 property class, making the AMF stud bolt appropriate for many structural and mechanical fastening tasks where defined mechanical properties are required. What material treatment does the stud have? The component is heat treated to achieve property class 8.8, providing improved tensile strength and yield compared with untreated fasteners. Which tools are required for installation? Standard spanners or sockets matching the 19 mm hexagon across flats and standard torque equipment for an M16 thread are suitable for installation of this stud bolt. Is the stud corrosion-resistant for outdoor use? No specific corrosion protection is specified. For corrosive or outdoor environments, additional surface treatment or a corrosion-resistant alternative should be considered. What is the packaging unit and SKU for ordering? The packaging unit is 1 and the article number / SKU is 4000603418NW for ordering and stock identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Stud Bolt M20 Heat-Treated 8.8 DIN 6379 - AMF
Take advantage of a DIN 6379 specification and grade 8.8 tempering for dependable load-bearing performance in long-reach connections; the M20 thread and 500 mm length reduce the need for adapters and speed assembly. Order the stud bolt directly via Metav Werkzeuge or ask our consultants if needed. Stiftschraube DIN6379 M20x500mm, tempered to 8.8 — AMF stud bolt for heavy-duty fastening Stiftschraube DIN6379 M20x500mm vergütet auf 8.8 AMF is a long M20 stud bolt designed for secure mechanical joins and through-bolting in structural and machine-building applications. DIN 6379 conformity High-strength grade 8.8 tempering M20 thread for heavy-duty fastening 500 mm overall length Predictable assembly with standard compliance Conformity to DIN 6379 guarantees dimensional interchangeability and consistent thread geometry, which simplifies procurement and replacement planning. For production lines and maintenance workshops, a standardised fastener reduces measurement effort and tolerance checks; the clear reference to the norm also aids documentation and quality control. The certified specification contributes to reliable joint behaviour under dynamic load and supports traceability across components. Strength and safety from grade 8.8 tempering Tempering to grade 8.8 provides improved tensile and yield properties compared with general-purpose fasteners, resulting in a more secure clamped joint and lower risk of deformation in service. This fastener's heat treatment enhances fatigue resistance for cyclic loads in rotating or vibrating equipment. For engineers and buyers, the benefit is fewer unscheduled maintenance stops and extended service intervals owing to the improved mechanical performance. Long reach design reduces installation complexity With an overall length of 500 mm, the stud bolt is suitable for deep or sandwich-type assemblies where through-bolting is required. The extended length eliminates the need for multiple components or extensions, streamlining inventory and minimising assembly steps. The M20 thread dimension is a common size in heavy machinery, ensuring compatibility with standard nuts and washers and easing integration into existing assemblies. Manufactured for consistency and reliable supply Produced under the AMF label, the fastener is made to the declared standard and labelled for clear identification. Sourcing through Metav provides an additional quality filter and logistical reliability from the Emmerich location, which is particularly valuable for industrial users who require consistent replenishment. The combination of defined manufacturing practice and dependable delivery reduces administrative overhead and supports uninterrupted production. Practical benefits for procurement and maintenance Specifying this stud bolt simplifies purchasing lists and maintenance kits: the clear designation, known thread size and tempering class enable straightforward selection and stock control. Maintenance technicians and assembly planners benefit from fewer part variants and direct compatibility with common tightening tools and torque tables. Where traceability matters, the SKU and labelling help link installed parts to batch records. For robust, standard-compliant fastening choose the AMF M20×500 stud bolt and contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833289NW SKU: 4000833289NW UID: 4000833289NW Manufacturer: AMF Product type: Stud bolt Dimensions / core data Thread: M20 Overall length: 500 mm Width: 27 mm Standard: DIN 6379 Materials & special features Tempered to grade 8.8 Label: Stiftschraube DIN6379 M20x500mm vergütet auf 8.8 AMF Packaging unit: 1 Addition: b: 315 FAQ What standards does this stud bolt meet? This stud bolt complies with DIN 6379, ensuring standard thread form and dimensions for reliable interchangeability. Is the fastener suitable for heavy-duty applications? Yes; the component is tempered to grade 8.8, providing enhanced tensile properties suitable for demanding machine and structural connections. What are the key dimensions to check for fit? Confirm the M20 thread and the 500 mm overall length to ensure compatibility with the intended assembly and available nuts or tapped holes. Can the stud bolt be used with standard M20 nuts and washers? The fastener uses a standard M20 thread form, so it pairs with common M20 nuts and washers specified for the application’s load class. How is the product identified for reordering? Use the SKU 4000833289NW and the AMF labelling on the product for accurate reordering and batch traceability. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 12mm T-Slot Screw M12 Grade 10.9 With Nut And Washer, DIN 787 - AMF
A compact solution for secure fixture clamping: the M12 T-slot screw meets DIN 787 and offers high tensile grade 10.9 strength in a 50 mm length for reliable tool-holding; supplied complete with nut and washer for immediate installation. Order the T-slot screw directly via Metav Werkzeuge or ask our consultants if needed. T-slot screw DIN 787 — M12 x 50 mm, grade 10.9 (AMF) T-slot screw DIN 787 for 12 mm T-slots, designed for secure clamping in machine tables, fixtures and tooling plates T-slot screw »4000833309NW« by AMF DIN 787 standard for secure clamping M12 thread for 12 mm T-slots Grade 10.9 strength, incl. nut and washer Robust clamping performance for workshop and production The fastener conforms to DIN 787, ensuring a standardised fit for machine tables and fixture systems. With an M12 thread matched to a 12 mm T-slot and an overall length of 50 mm, the screw provides consistent thread engagement and repeatable clamping force. The grade 10.9 designation signals elevated tensile and yield strength compared with lower grades, which reduces elongation under load and helps prevent fixture movement during machining. This combination of standard conformity and mechanical strength supports reliable production processes and minimises rework. Ready-to-install design reduces assembly time Delivered with a matched nut and washer, the fastener arrives as a complete clamping solution ready for immediate use on standard T-slot tables. The single-length configuration simplifies parts handling and inventory, while the screw geometry is optimised for insertion into 12 mm slots without additional modification. Because the item is supplied as a set, workshop staff can complete jigs and fixtures faster, reduce downtime between set-ups and keep cycle times predictable — practical benefits for both one-off jobs and repetitive production runs. Proven quality and supply assurance for industrial use Produced under the AMF designation, this screw is traceable by SKU 4000833309NW and intended for demanding assembly and tooling tasks. The robust mechanical properties and standardised dimensions make it suitable for use across milling machines, drilling rigs and modular fixture systems where consistent clamping is required. Metav’s distribution ensures a dependable supply channel and a quality filter at the European hub in Emmerich, supporting long-term availability and straightforward replenishment for professional workshops and industrial buyers. For AMF-grade clamping reliability and quick technical advice, contact Metav Werkzeuge in Emmerich — ordering and consultancy are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833309NW Label: T-slot screw DIN 787 M12 x 50 mm grade 10.9 incl. nut and washer Brand: AMF Numbers / Core technical data Thread: M12 T-slot width: 12 mm Overall length: 50 mm Strength class: 10.9 Packaging unit: 1 Special features / Versions Conforms to DIN 787 Supplied with nut and washer SKU for ordering: 4000833309NW Axite enrichment values: A: 11.7; B: 35; E: 18; K: 7 FAQ What standard does this T-slot screw meet? The item complies with DIN 787, which defines dimensions and profiles for T-slot screws used in machine tables and fixtures. Which thread and T-slot size are suitable for this screw? The screw carries an M12 thread and is designed specifically for 12 mm T-slots, providing standardised compatibility with machine tables. Is the nut and washer included in delivery? Yes, the T-slot screw is supplied complete with the matching nut and washer so it is ready for immediate installation. What is the overall length and strength class? Overall length is 50 mm and the fastener is manufactured to grade 10.9, offering higher tensile strength for demanding clamping tasks. How can the product be identified when ordering? Use SKU 4000833309NW or the label reference for ordering and stock enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Clamping Vise Flat Support Height 50-70mm Load Capacity 100kg TR 30x4 - AMF
Take advantage of a compact clamping solution that combines robust load handling, adjustable flat support and simple operation for consistent workshop results. The combination of secure thread drive and a 50–70 mm support height ensures stable seating of varied workpieces. Order the AMF screw clamp directly via Metav Werkzeuge or ask our consultants if needed. AMF Screw Clamp Nr. 6400 - 70 — flat support, adjustable 50–70 mm The AMF Screw Clamp Nr. 6400 - 70 is a compact clamping device for workshop and industrial fixtures, offering a flat support with an adjustable height range to hold a variety of components securely. Flat support, height adjustable 50–70 mm Max. capacity 100 Thread TR 30 x 4 for secure clamping Compact group size 70 with 50 mm diameters Reliable clamping performance for routine production This clamping unit delivers predictable, repeatable holding with a focus on operational efficiency. The screw clamp mechanism, driven by a TR 30 x 4 thread, converts operator input into steady axial force, reducing the need for frequent repositioning. For production environments where cycle time and reproducibility matter, the stable mechanical action supports quicker setup and consistent results, helping to reduce rework and maintain throughput. Flexible flat support for varied workpieces An adjustable flat support with a 50–70 mm height range provides flexibility when securing parts of different profiles. The adjustable height allows the support to be aligned with the workpiece datum, improving contact area and reducing deformation risk on delicate components. This adaptability makes the device suitable for workshops that process both small-scale fixtures and larger assemblies, simplifying the clamping process while preserving precision. Compact design that integrates into workshop jigs Designed as a group-size 70 clamping element with D1/D2 = 50 mm, the item is easy to incorporate into existing jigs and fixtures. The compact footprint enables close placement of multiple clamps when evenly distributed holding force is required. Given its construction, the unit is appropriate for metalworking and general workshop use where secure seating and repeatable positioning are essential. The AMF screw clamp balances robustness and space efficiency for everyday shop applications. Contact Metav Werkzeuge for tailored advice on integrating the AMF screw clamp Nr. 6400 - 70 into production fixtures; call +49 2822 7131930 or email info@metav-werkzeuge.com for immediate assistance and supply from Emmerich Technical Data Article number: 4000833114NW Type: Nr. 6400 - 70 Product: Screw clamp Brand: AMF Packaging unit: 1 Core specifications Max. capacity: 100 Thread: TR 30 x 4 Height min.: 50 mm Height max.: 70 mm D1: 50 mm D2: 50 mm Features Flat support Group size 70 Compact design Ready for jig integration FAQ What is the maximum load the clamp can take? The maximum load is stated as 100 for the AMF screw clamp Nr. 6400 - 70. How is the support height adjusted? Height adjustment is achieved via the clamping assembly; the adjustable flat support on the AMF screw clamp allows settings from 50 mm to 70 mm. Is the clamp suitable for integration into existing fixtures? Yes, the compact group size 70 and 50 mm diameters make the clamp suitable for integration into workshop jigs and fixture plates. Which thread specification does the clamping drive use? The clamping drive uses a TR 30 x 4 thread, providing secure and reliable axial movement for clamping action. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Screw Vice With Flat Jaw Support H38-50mm, Load Capacity 25kg - AMF
Take advantage of a compact, low-profile clamping solution that combines adjustable height (38–50 mm) with a flat support and a rated max. load of 25 kg for consistent workshop performance; order via Metav Werkzeuge or consult the team for specification guidance. AMF Screw Clamp No. 6400, Size 50 — flat support, H 38–50 mm AMF Screw Clamp No. 6400, Size 50 is a compact screw clamp for low-profile clamping and light assembly or machining tasks, offering a small footprint and reliable holding power Flat low-profile support Adjustable height 38–50 mm Max. load 25 kg Compact jaw diameter 31 mm Precise, low-profile clamping that saves setup time The screw clamp delivers stable clamping where space is limited. Its flat support reduces workpiece lift and facilitates accurate alignment on assembly jigs and fixtures. With an adjustable height of 38–50 mm, the device allows fine tuning of clamping position without additional shimming, which shortens setup times and supports repeatable results. The compact jaw diameter of 31 mm provides a concentrated hold for small components while maintaining accessibility. Secure mounting and clear technical fit for workshop systems Designed with a mounting interface of TR 20 x 4 mm, the component integrates cleanly into slot-based fixture systems and modular tooling plates. The rated max. load of 25 kg gives a verifiable basis for selection when planning clamping forces in small- to medium-duty operations. Clear numeric specifications reduce uncertainty during procurement and help maintain throughput: the mechanical data supports predictable behaviour under normal workshop loads and repetitive cycles. Robust everyday use with straightforward integration Constructed for routine workshop environments, this clamp combines durability with simple handling. The low-profile design minimises interference with tooling paths and the flat support improves contact stability for thin or delicate parts. Integration requires minimal amendment to existing fixturing thanks to standardised dimensions, enabling quick replacement or addition to modular setups. Metav’s stock and logistics ensure dependable delivery from Emmerich and assistance is available for technical queries. Choose the AMF screw clamp No. 6400 for compact, reliable clamping — contact Metav Werkzeuge for specification advice and prompt delivery from our Emmerich hub Technical data Article number: 4000833112NW Type: Nr. 6400 - 50 Product: Screw clamp Brand: AMF Packaging unit: 1 Dimensions & performance Max. load: 25 kg TR: 20 x 4 mm Height range: 38–50 mm D1: 31 mm D2: 31 mm Materials & features Flat support for low-profile clamping T-slot compatibility 20 x 4 mm Compact jaw diameter 31 mm Suitable for assembly and light machining FAQ What is the maximum load capacity of this clamp? The AMF Screw Clamp No. 6400 (SKU 4000833112NW) has a rated maximum load of 25 kg, which serves as the selection baseline for light- to medium-duty clamping tasks. How is the clamp mounted to a fixture plate? Mounting is achieved via a TR 20 x 4 mm slot interface; this standardised dimension allows the clamp to be integrated into common slot-based fixture systems and modular tooling plates. What height adjustment does the clamp allow? The device provides an adjustable height range of 38–50 mm, enabling fine positional tuning without the need for shims. Is this clamp suitable for thin or delicate parts? Yes — the flat support and compact jaw geometry give stable contact and reduced point loading, which is beneficial when securing thin or fragile components during assembly. Can this clamp be used in automated processes? The compact profile and standard interface dimensions make the clamp compatible with many automated and semi-automated setups; check the specified TR and height range against the machine’s tooling envelope for confirmation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Stud Screw M10x50 Hardened Grade 10.9, DIN 6379 - AMF
Take advantage of the combination of high-strength performance, DIN 6379 compliance and precise M10 × 50 mm sizing for secure, long-lasting assemblies; order the fastener directly via Metav Werkzeuge or consult the technical team for application advice. Stud screw DIN 6379, M10 × 50 mm, tempered to grade 10.9 — AMF A Stud screw DIN 6379 M10 × 50 mm engineered for high-strength mechanical fastening in industrial and workshop assemblies where standard metric threads and robust tensile performance are required. DIN 6379 certified fastening component High-strength tempered steel, grade 10.9 M10 metric thread for standard connections 50 mm overall length for flexible assembly Reliable high-strength fastening for industrial assemblies The fastener meets DIN 6379 and is manufactured to deliver consistent mechanical performance. As a high-strength element tempered to grade 10.9, this component is suitable where elevated clamping forces and resistance to shear are needed. The M10 thread follows metric standards, enabling compatibility with commonly used nuts and tapped holes, while the 50 mm overall length provides sufficient engagement for many assembly scenarios. This combination reduces the risk of joint failure and supports uninterrupted production. Simple integration into existing fittings and jigs Designed as a standard metric fastener, the component slots into existing tooling and assemblies without modification. The defined thread geometry ensures predictable fit with matched hardware, which simplifies inventory management and reduces assembly time. Where repeatability matters, the standardisation of dimensions and compliance with the recognised norm streamline procurement decisions and spare-part replacement, increasing operational efficiency on the shop floor. Built for durability and straightforward maintenance Tempering to grade 10.9 provides the fastener with enhanced strength and wear resistance compared with lower-strength classes. This improves fatigue behaviour in cyclic loads and extends service life in demanding environments. The robust manufacturing standard minimises the need for frequent change-outs, lowering downtime and supporting a dependable maintenance schedule for production equipment. Clear specification and traceability for quality assurance Specification clarity is essential in industrial procurement. The component is identifiable by its SKU and conformity statement, facilitating traceability in documentation and inspection processes. Clear technical labelling supports quality audits and assists purchasers and engineers in selecting the correct fastener for structural or moving assemblies, thereby reducing the likelihood of mismatched parts and subsequent rework. Order genuine AMF stud screws via Metav Werkzeuge for dependable, standard-compliant fastening; for specific application guidance contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4000833251NW SKU: 4000833251NW Standard: DIN 6379 Brand: AMF Facts Thread: M10 Width: 13 mm Overall length: 50 mm Packaging unit: 1 Special features Product type: Stud screw Tempered to grade 10.9 Addition: b: 25 UID: 4000833251NW FAQ What is the primary standard for this fastener? The stud screw complies with DIN 6379, ensuring standardised dimensions and performance characteristics appropriate for industrial assemblies. Which applications is the stud screw suitable for? The stud screw DIN 6379 M10 × 50 mm (AMF, SKU 4000833251NW) is intended for mechanical fastening where a strong metric connection is required, such as machinery assemblies, fixtures and structural joins. How does grade 10.9 affect performance? Tempering to grade 10.9 gives the fastener higher tensile strength and improved fatigue resistance, which is beneficial for load-bearing or vibrating assemblies. Can the M10 thread be used with standard nuts and tapped holes? Yes, the M10 metric thread conforms to standard metric fittings and is compatible with matched nuts and tapped holes following metric specifications. How is the component identified for procurement and documentation? Use the SKU 4000833251NW, the DIN reference and the brand designation to ensure correct ordering and traceability in inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Stud Screw M12 Heat Treated 10.9, DIN 6379 - AMF
Take advantage of a robust combination of DIN 6379 compliance, property class 10.9 strength and standardised metric sizing for reliable, repeatable assemblies; order the fastener directly via Metav Werkzeuge or consult the team for specification support. Stud bolt DIN 6379 M12×50, tempered to property class 10.9 (AMF) Stud bolt DIN 6379 M12×50 is a high-strength fastener for mechanical and structural applications, offering standard metric thread engagement for consistent clamping performance Tempered to property class 10.9 Conforms to DIN 6379 standard Metric thread M12 for interchangeability Overall length 50 mm for defined engagement Reliable high-strength fastening for industrial assemblies The AMF stud bolt, manufactured to DIN 6379, delivers predictable mechanical performance thanks to its tempering to property class 10.9, which indicates elevated tensile and yield strength compared with lower classes. In practical terms, this means the fastener sustains higher clamping loads and resists permanent deformation in demanding joints. For procurement and engineering teams the clear benefit is a fastener that supports safety margins without oversizing components, reducing redesign effort and maintaining production throughput through dependable mechanical behaviour. Standard compliance and assembly compatibility Compliance with DIN 6379 and the use of a standard M12 thread ensure straightforward integration into metric assemblies and compatibility with commonly stocked nuts, washers and tapped holes. Specifying this fastener reduces variability in component sourcing and simplifies inventory management for maintenance and production. The standardised geometry also aids automated assembly processes, as tools and torque settings can remain consistent across batches, improving cycle times and lowering risk of assembly errors. Durability that supports long service intervals Tempering to property class 10.9 provides enhanced fatigue resistance and dimensional stability under cyclic loading, which benefits installations subject to vibration or fluctuating loads. The controlled heat treatment process yields uniform mechanical properties that translate into longer maintenance intervals and fewer unscheduled stoppages. Combined with AMF’s manufacturing standards, the result is a robust fastener option for machinery, frames and structural connections where reliability is a priority. Practical application guidance for designers and fitters The stud bolt is supplied in a single-piece packaging unit, suitable for controlled assembly procedures and traceable component usage. When integrating the fastener into a joint, match thread class and mating materials, apply the manufacturer-recommended lubrication and tightening procedure, and verify clamp loads according to the joint design; this approach preserves the 10.9 property-class performance. For special applications or unusual material combinations, technical consultation is recommended to confirm suitability and torque settings. Choose the AMF stud bolt tempered to property class 10.9 for high-strength, standardised fastening — contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833257NW Label: Stiftschraube DIN6379 M12x50mm tempered to property class 10.9 AMF Manufacturer: AMF Packaging unit: 1 Measurements Thread: M12 Overall length: 50 mm Width: 15 mm Addition: b: 25 Standards & material properties Standard: DIN 6379 Tempered to property class 10.9 Fastener type: Stud bolt SKU: 4000833257NW FAQ What strength class does this stud bolt have and what does it mean? The stud bolt is tempered to property class 10.9, which indicates high tensile strength and good yield characteristics suitable for demanding mechanical joints. Is the thread specification compatible with standard metric nuts? Yes, the M12 thread conforms to metric standards and is compatible with standard M12 nuts and tapped holes when matched by thread class. For which applications is this DIN 6379 stud bolt most suitable? This fastener is suitable for mechanical assemblies, structural connections and equipment subject to elevated loads or dynamic stresses where property class 10.9 performance is required. How long is the stud bolt and how does that affect engagement? The overall length is 50 mm, providing defined thread engagement; designers should verify that this length matches the required clamping and thread engagement for the joint. Can the fastener be used with hardened or specialised materials? Use of the stud bolt with hardened or specialised mating materials should be reviewed for compatibility; consult the technical documentation or Metav Werkzeuge for joint-specific guidance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm T-Slot Bolt M12 With Nut And Washer DIN 787 Grade 10.9 - AMF
Take advantage of a high-strength T-slot fastening solution that combines DIN 787 compliance, reliable M12 threading and a grade 10.9 specification for secure clamping; order the part directly via Metav Werkzeuge or consult their specialists for compatibility advice. AMF T-slot bolt, DIN 787 — M12 thread, 14 mm T-slot, 50 mm length AMF T-slot bolt for secure clamping in 14 mm T-slots; supplied complete with nut and washer for immediate fitting in workshop and machine tool applications. T-slot bolt to DIN 787 standard 14 mm T-slot compatibility M12 metric thread, 50 mm overall length Strength grade 10.9; incl. nut and washer Secure, standardised fastening for machine tables The DIN 787 compliant design ensures consistent geometry and interchangeability across machine tables and fixtures. Manufactured to meet a recognised metric standard, this T-slot fastener delivers predictable seating and clamping behaviour when used in compatible 14 mm T-slots. The standard conformity simplifies procurement and inventory management by aligning with established workshop norms, while the included nut and washer permit immediate installation without sourcing additional components. High clamping reliability and material performance Specified as grade 10.9, the fastener offers elevated tensile strength compared with lower-grade alternatives, translating into improved resistance to shear and elongation under load. The M12 thread provides a common metric interface for many clamping elements and tooling accessories, supporting reliable torque transmission and repeatable clamp forces. For routine assembly, the combination of thread size and grade results in a robust connection suited to demanding machining and fixture applications where secure workholding is essential. Practical dimensions and straightforward integration With a clear overall length of 50 mm and compatibility with 14 mm T-slots, this fastener integrates cleanly into standard clamping setups without modification. The additional axite specification (A: 13.7; B: 35; E: 22; K: 8) gives precise dimensional guidance for designing or verifying fixture clearances and seating depths. These numeric details aid planning for toolpaths, guard clearance and component layout, reducing set-up time and supporting efficient production workflows. Contact Metav Werkzeuge for tailored advice on integrating the AMF T-slot bolt (SKU 4000833316NW) into existing fixturing systems or to request a technical quotation and delivery options Technical data Article number: 4000833316NW Standard: DIN 787 Product type: T-slot bolt Brand: AMF Thread: M12 T-slot width: 14 mm Overall length: 50 mm Strength grade: 10.9 Includes: nut and washer Packaging unit: 1 Axite addition: A: 13,7; B: 35; E: 22; K: 8 Numbers / facts T-slot width: 14 mm Thread size: M12 Length: 50 mm Strength: grade 10.9 SKU: 4000833316NW Axite values: 13.7 / 35 / 22 / 8 Special features / versions DIN 787 compliant geometry Supplied with nut and washer for immediate use Designed for workshop and machine tool clamping applications AMF brand component FAQ What machine table slots is this fastener compatible with? The AMF T-slot bolt is designed for 14 mm T-slot systems and follows DIN 787 geometry to ensure compatibility with standard machine tables and fixtures. Can this fastener withstand high clamping loads? Yes; the bolt is specified as grade 10.9, which provides high tensile strength and reliable performance under significant clamping forces when tightened to the appropriate torque for an M12 thread. Is the fastener supplied ready for installation? The delivery includes the T-slot bolt together with a nut and washer for immediate fitting, allowing installation without the need to source additional fastening parts. Are there detailed dimensions for fixture planning? Dimensional guidance is provided via the axite values (A: 13.7; B: 35; E: 22; K: 8) and the core measurements (14 mm T-slot, M12 thread, 50 mm length), which assist in checking seating depth and clearance. What is the SKU for ordering and reference? The product is listed under SKU 4000833316NW, referenced as an AMF T-slot bolt to DIN 787, M12, 50 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
52-62mm Clamping V-Block With Flat Support And Magnetic Base, Load 100 N - AMF
Take advantage of the adjustable height and magnetic base to secure small workpieces quickly while maintaining precise set-ups; the compact diameters and reliable max. load capacity of 100 kg ensure stable support across assembly and inspection tasks. Order directly via Metav Werkzeuge or request tailored advice from the consultants. AMF Screw Support No. 6400M - 62 — adjustable support with magnetic base, 52–62 mm The AMF Screw Support No. 6400M - 62 is an adjustable screw support with a flat contact surface and an integrated magnetic base, designed for secure positioning and support of components in machining, assembly and inspection applications. Adjustable height 52–62 mm Magnetic base for firm hold Max. load capacity 100 kg Thread 30 x 4 for fine adjustment Stable support for machining and inspection The component delivers a secure positioning solution where repeatable support is required. The combination of a flat contact surface and an integrated magnetic base allows the support to be fixed on ferrous machine tables or fixtures, so setups remain stable during measurement or light machining tasks. This reduces clamping time and minimises rework, supporting a more efficient workflow in the workshop. Fine, reliable adjustment for consistent set-ups A thread 30 x 4 provides controlled, incremental height changes across the adjustable height range of 52–62 mm, enabling precise alignment with jigs and tooling. Because the adjustment mechanism is coarse enough for quick rough setting yet fine enough for accurate levelling, the support is suitable for repeatable processes where consistent vertical position is essential. The measured approach to adjustment improves process reliability. Compact footprint with practical load capacity The support features compact diameters (top and base around 50–55 mm) and a max. load capacity of 100 kg, making it a space-efficient solution for benches, fixtures and small machines. The small footprint allows multiple supports to be used in close proximity, while the rated capacity is sufficient for many component-holding and assembly tasks. This balance of size and strength helps maintain a tidy workstation without sacrificing stability. Designed for workshop durability and quick deployment Constructed for everyday shop use, the support is finished for practical handling and quick placement. The flat support is suited to a variety of workpiece profiles, while the magnetic base facilitates rapid repositioning without the need for additional clamps. For operations that demand frequent changeovers, this setup reduces downtime and streamlines setup procedures, contributing to increased productivity. Contact Metav Werkzeuge for specific delivery options or to discuss how the AMF Screw Support No. 6400M - 62 can be integrated into existing clamping setups Technical data Article number / SKU: 4000833475NW Type: Nr. 6400M - 62 Item name: Schraubbock Nr.6400M Gr.62 m.flacher Auflage u.Magnetfuß H.52-62mm AMF Product type: screw support Manufacturer: AMF Packaging unit: 1 Internal ID: 4000833475NW Dimensions & performance Max. load capacity: 100 kg Thread: 30 x 4 Height minimum: 52 mm Height maximum: 62 mm D1: 50 mm D2: 50 mm D3: 55 mm Features Flat support surface Magnetic base for fixing to ferrous surfaces Fine-thread adjustment Compact top and base diameters FAQ What surfaces is the magnetic base suitable for? The magnetic base is designed to hold the AMF Screw Support No. 6400M - 62 firmly on ferrous machine tables and steel fixtures, enabling stable support during assembly and inspection. How precise is the height adjustment? Height is adjusted by a 30 x 4 thread on the AMF screw support, which permits controlled changes across the 52–62 mm range for repeatable set-ups. What load can the support carry? The support has a stated maximum load capacity of 100 kg, which is suitable for many small assembly and inspection tasks where compact supports are required. Can multiple supports be used together for larger components? Yes, the compact diameters and flat contact surfaces of the AMF Screw Support No. 6400M - 62 allow several units to be positioned close together to distribute load and support larger workpieces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
58-Piece Clamping Tool Set M10x12mm, Metric Threads, Assorted Clamps - AMF
Secure, standard-compatible workholding with 24 clamping bolts and M10 x 12 T-slot nuts delivers fast set-up and consistent clamping across metric machine tables; the 58-piece kit in a sorted storage case keeps inventory under control and reduces downtime — order directly via Metav Werkzeuge or consult their specialists for application advice. Clamping tool assortment M10 x 12 – 58-piece set by AMF The Clamping tool assortment M10 x 12 is a compact workshop kit designed for secure workholding on metric T-slotted machine tables. Complete 58-piece clamping set M10 x 12 T-slot compatibility Includes step clamps and clamping blocks Supplied in a sorted storage case Rapid, reliable clamping for metric T-slots The 58-piece assortment brings together the most used components for T-slot workholding: 24 clamping bolts, 6 T-slot nuts, nuts and extension nuts, together with step clamps and clamping blocks. Having these parts assembled in one kit shortens machine set-up time and avoids mismatched threads at the bench. The predominance of metric threads ensures compatibility with standard machine tables and fixtures, enabling repeatable clamping without improvised adapters. Consistent force and faster set-up cycles Built around metric thread dimensions and standardised components, this clamping kit promotes predictable clamping force and reproducible results. The presence of multiple clamping bolts and step clamps allows secure fixation of varied workpiece geometries with minimal adjustment. For production environments where set-up time translates directly into cost, the organised assortment supports quicker changeovers and fewer interruptions, contributing to improved throughput and fewer scrapped parts. Organised storage for workshop efficiency Supplied in a sorted storage case, the set simplifies tool control and stocktaking on the shop floor. Individual compartments keep clamping bolts, T-slot nuts, extension nuts and clamping blocks clearly separated, making replenishment straightforward and reducing time spent searching for the right part. The compact kit fits a toolbox or maintenance cart, making it suitable for both stationary machine tools and mobile service tasks while maintaining an orderly inventory. For tailored advice on how the AMF clamping tool assortment fits specific T-slot tables, contact Metav Werkzeuge for direct technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832752NW Designation: Clamping tool assortment M10 x 12, 58-piece Manufacturer: AMF Facts T-nut size: M10 x 12 Content: 58 pieces Packing unit: 1 Special features Metric threads 24 clamping bolts 6 T-slot nuts 6 nuts 4 extension nuts 12 step clamps 6 clamping blocks Sorted storage case FAQ What components are included in the clamping tool assortment? The clamping tool assortment M10 x 12 (AMF) contains 24 clamping bolts, 6 T-slot nuts, 6 nuts, 4 extension nuts, 12 step clamps and 6 clamping blocks, all supplied in a sorted storage case (SKU 4000832752NW). Which T-slot size is this set compatible with? The AMF clamping tool assortment is designed for M10 x 12 T-slots and uses metric threads throughout for direct compatibility with standard metric machine tables. Is the set ready for immediate use in the workshop? Yes, the AMF clamping kit is delivered as a ready-to-use assortment in a sorted case so it can be deployed straightaway for clamping operations. Can this kit be used for different workpiece sizes and shapes? The assortment includes step clamps and clamping blocks that enable adaptable clamping configurations, and the variety of clamping bolts in the AMF set supports different workpiece geometries. What is the product reference for orders and enquiries? Refer to the AMF clamping tool assortment, SKU 4000832752NW, when enquiring or ordering to ensure the correct 58-piece configuration is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
58mm Clamping Tool Kit M8 x 10, 58 Pieces - AMF
Take advantage of a compact, workshop-ready clamping solution that combines comprehensive component coverage and straightforward organisation to speed up setups and reduce downtime; the set includes M8 x 10 T-slot components and an organised sorting case for immediate use — order the AMF Clamping Tool Set directly via Metav Werkzeuge or ask our consultants if needed. AMF Clamping Tool Set M8 x 10 mm, 58-piece – organised T-slot clamping kit AMF Clamping Tool Set M8 x 10 mm is a compact clamping assortment conceived for T-slot machining and general workshop fixture tasks Metric threads M8 x 10 for T‑slots Complete 58-piece clamping set Includes 24 clamping bolts and nuts Supplied in organised sorting case Faster, repeatable clamping for production workflows This clamping assortment delivers a pragmatic route to consistent fixturing: with 24 clamping bolts and matched nuts, the kit enables secure fastening across multiple T‑slot positions, reducing rework and improving repeatability in batch machining. The combination of step clamping irons and dedicated clamping blocks allows controlled vertical clearance and progressive clamping pressure, which helps maintain part geometry during milling or drilling. For purchasing and planning, the clearly defined component mix supports predictable tool management and faster changeovers on the shopfloor. Clear organisation that shortens setup times An organised sorting case keeps every element accessible and visible, simplifying inventory checks and tool allocation. By grouping T‑slot nuts, extension nuts and bolts together, the set reduces time spent searching for matched parts and avoids incompatible pairings. The practical arrangement also aids training for less experienced operators: the condition and function of each part is immediately apparent, which streamlines standard operating procedures and improves throughput without adding complexity to the workplace. Compatibility explained: what the components do The contents are tailored for standard T‑slot tables and fixtures. T‑slot nuts slide into M8 grooves for secure lateral positioning, while clamping bolts draw down the step clamping irons or clamping blocks to apply vertical pressure. Extension nuts increase reach where clamping studs are short or when additional standoff is required. These elements together form a flexible clamping system that adapts to variable workpiece heights and profiles, so workshops can clamp irregular shapes or stepped parts without bespoke hardware. Built for workshop use and long service life Components are suitable for regular workshop environments where fast assembly and repeated clamping cycles are the norm. The construction of the set focuses on robustness and serviceability: standardised thread forms and metric sizing ensure compatibility with widely used fixtures and replacement parts. Because the assortment concentrates on proven clamping principles rather than specialised, single‑use items, it supports broad shopfloor applications from prototyping to small‑batch production, offering a dependable foundation for everyday fixture work. For procurement advice or to discuss compatibility with existing fixtures, contact Metav Werkzeuge — the AMF kit is available through Metav and our consultants can advise on integration and order fulfilment Technical Data SKU: 4000832751NW Product type: Clamping tool set Brand: AMF T‑slot size: M8 x 10 Content: 58 pieces Packaging unit: 1 UID: 4000832751NW Facts 24 clamping bolts 6 T‑slot nuts 6 nuts 4 extension nuts 12 step clamping irons 6 clamping blocks Special features Metric threads M8 x 10 Organised sorting case Suitable for standard T‑slot tables Flexible configuration for variable part heights Workshop‑grade components FAQ What is included in the set? The set contains 58 parts: 24 clamping bolts, 6 T‑slot nuts, 6 nuts, 4 extension nuts, 12 step clamping irons and 6 clamping blocks as detailed in the product listing for the AMF Clamping Tool Set (SKU 4000832751NW). Is the kit compatible with standard T‑slot tables? Yes, the components are designed for M8 x 10 T‑slots and match common table profiles used in general machining and fixture setups. Can the assortment handle stepped or irregular parts? The combination of step clamping irons and clamping blocks allows secure clamping of stepped or uneven workpieces without the need for bespoke fixtures. Are replacement parts available separately? Individual elements such as clamping bolts and T‑slot nuts from the AMF clamping assortment can be reordered; refer to the SKU 4000832751NW when requesting matching items. Who is the manufacturer of this kit? The clamping tool set is supplied by AMF and distributed through Metav Werkzeuge for European workshop customers. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
58mm Clamping Tool Set M12 x 14, 58 Pieces - AMF
Combining a comprehensive 58-piece configuration with M12 x 14 T-slot compatibility and a purpose-built storage case, this clamping assortment speeds fixture changes and standardises setup across machines; order directly via Metav Werkzeuge or consult our specialists for application guidance. AMF Clamping tool assortment M12 x 14 mm — 58-piece set A Clamping tool assortment M12 x 14 mm engineered for fast, repeatable fixturing in T-slot worktables across production and jobbing environments 58-piece industrial clamping set Metric M12 x 14 T-slot compatibility Includes 24 clamping bolts and T-nuts Supplied in organised storage case Faster set-ups through standardised thread compatibility The assortment is built around M12 x 14 T-slot compatibility, enabling a consistent interface between fixtures and machine tables. Standardised metric threads reduce the need for ad hoc adaptors and simplify stock management, so changeovers become predictable and faster. With the 58-piece configuration, common clamping elements are available at hand, which cuts preparation time and supports higher machine utilisation. This reduces idle time and helps maintain steady production throughput without compromising clamping repeatability. Robust component mix for secure clamping and repeatability Contained items — including clamping bolts, T-slot nuts, extension nuts and step clamping levers — are selected to provide reliable clamping force and repeatable positioning. The step clamping levers permit rapid vertical adjustment without tools, while the combination of bolts and nuts secures parts for machining operations. Where even clamping pressure and repeatable contact points matter, this kit supplies the necessary elements to build stable, tool-holding fixtures; fewer improvisations mean fewer rejects and more confidence in process outcomes. Organised kit design to reduce inventory complexity A clearly organised set minimises time spent searching for parts: the assortment groups like items together for quick retrieval and replenishment. The included storage case keeps components visible and protected, accelerating toolroom logistics and simplifying inventory checks. For workshops seeking to consolidate suppliers and reduce procurement overhead, the kit supports lean stocking by covering the most common clamping needs in one package — a practical route to fewer purchase orders and a tidier workbench. For application advice on AMF clamping solutions or to arrange supply through Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich — specialists are available by phone or e‑mail to recommend the best configuration for specific T-slot setups. Technical data Article number: 4000832753NW Product: Clamping tool assortment Brand: AMF T-slot size: M12 x 14 Content: 58 pieces Packaging unit: 1 Core data 24 clamping bolts 6 T-slot nuts 6 nuts 4 extension nuts 12 step clamping levers 6 clamping blocks Special features Metric threads Storage case included Suitable for T-slots M12 x 14 Organised set for quick set-up FAQ What is included in the clamping kit? The AMF clamping tool assortment M12 x 14 mm contains 58 pieces, including 24 clamping bolts, 6 T-slot nuts, 12 step clamping levers and 6 clamping blocks (SKU 4000832753NW). Is this assortment suitable for standard T-slot tables? Yes, the set is designed for T-slot tables with M12 x 14 specification and provides the common components required for typical fixturing tasks. Can the step clamping levers be adjusted without extra tools? The supplied step clamping levers permit quick height adjustment and repositioning without additional tools, enabling faster part changes. How does the storage case improve workshop efficiency? The organised storage case protects components and groups like items together, making replenishment and part retrieval faster and reducing setup times. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
58mm Clamping Tool Set M14 x 16 With 24 Clamping Bolts 6 T-Nut Stones 6 Nuts - AMF
Take advantage of a complete, 58-piece kit designed for fast, repeatable clamping in M14 workstations; the combination of comprehensive contents and organised storage ensures shorter setup times and fewer missing parts on the shop floor. Order the set via Metav Werkzeuge or contact the consultants for tailored advice. Clamping tool assortment M14×16, 58-piece – AMF clamping kit with M14 x 16 T-slot compatibility Clamping tool assortment M14×16, 58-piece provides a ready-to-use collection of clamping hardware for machine tables and fixtures, optimised for metric T-slots and workshop production. Complete 58-piece kit for quick setups Includes 24 clamping bolts and T-slot nuts Compatible with M14 x 16 T-slots and fixtures Faster set-up and consistent clamping for production The kit delivers an immediate productivity uplift through an organised selection of clamping elements that reduces changeover times. With 24 clamping bolts and a variety of nuts and extensions included, the assortment enables consistent clamp force across multiple workpieces, which supports reliable machining tolerances. The use of standard M14 x 16 T-slot components simplifies integration into existing fixtures and machine tables; for purchasers unfamiliar with T-slot terminology, these are the common recessed tracks on machine beds that accept the kit’s nuts and bolts to secure workpieces firmly and repeatably. Organised contents minimise downtime and errors A clear benefit of the set is the integrated sorting case, which keeps the individual parts visible and accessible during tool changes. The assortment groups components—such as bolts, T-slot nuts, extension nuts, step clamps and clamp blocks—so that operators can select the right item without searching through mixed boxes. This organisational advantage not only reduces interruptions during shift handovers but also supports traceability and inventory control in busy workshops, helping maintain a smoother production flow and fewer lost components. Versatile components for workshop reliability The selection of stepped clamp irons and multiple nut types in this assortment supports a range of clamping geometries, from low-profile holds to taller set-ups requiring extensions. The variety supplied makes the kit suitable for both repetitive series production and flexible job-shop work, improving set-up flexibility while keeping fixture complexity low. Specifying a single, comprehensive kit removes the need for multiple small orders and ensures that compatible, metric-threaded parts are always at hand, which contributes to steadier lead times and fewer emergency purchases. For procurement or technical advice on the AMF clamping tool assortment, contact Metav Werkzeuge for a tailored recommendation and assured supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000832754NW SKU: 4000832754NW Name: Clamping tool assortment M14×16, 58-piece Product type: Clamping tool assortment Brand: AMF Facts Contents: 58 pieces T-slot size: M14 x 16 Packaging unit: 1 Special features Metric threads 24 clamping bolts 6 T-slot nuts 6 nuts 4 extension nuts 12 step clamp irons 6 clamping blocks Sorting case FAQ What components are included in the clamping tool assortment? The AMF clamping tool assortment M14×16, 58-piece contains 24 clamping bolts, 6 T-slot nuts, 6 nuts, 4 extension nuts, 12 step clamp irons, 6 clamping blocks and a sorting case (SKU 4000832754NW). Is this kit compatible with standard machine T-slots? Yes, the set is designed for M14 x 16 T-slot systems and fits machine tables and fixture plates that use that metric T-slot specification. Can the assortment support different clamp heights and setups? The included step clamp irons and extension nuts allow for a range of clamp heights and geometries, making the kit adaptable to various workpiece profiles. Is the assortment suitable for series production and one-off jobs? The organised contents and variety of clamping elements make the kit suitable for both repetitive production and flexible job-shop environments, supporting fast changeovers and consistent clamping. How does the sorting case improve workshop efficiency? The sorting case keeps items grouped and visible, reducing search time and the risk of missing parts during fixture changes; this supports faster set-up and better inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com