600kg Floor-Through Precision Scale With Stainless Steel Indicator, IP68 Scale/IP65 Indicator - KERN

Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —

Reliable stainless steel tripod with height-adjustable support and a solid three‑leg base guarantees steady elevation of weighing and evaluation units; combine robust construction and ergonomic adjustment for uninterrupted measurement workflows. Order directly via Metav Werkzeuge or consult our technical advisers for individual compatibility. YKP-01 Tripod Stand — Stainless steel, height-adjustable 750–1000 mm (KERN) A YKP-01 tripod stand designed to raise weighing indicators and evaluation units, optimised for workshop and laboratory scale applications. Height-adjustable 750–1000 mm Stainless steel construction Solid three‑leg tripod base Compact weight of 3 kg Engineered stability for consistent results The tripod provides a stable platform for measurement electronics, reducing vibration and movement that can impair readings. Constructed with a three‑leg base, the stand distributes weight evenly to maintain level positioning on uneven floors, which supports reliable output from connected indicators. This stability translates into fewer rechecks and a smoother production process, especially where repeatable accuracy is essential in weighing tasks. Durable materials built for workshops Made from stainless steel with a solid tripod foot, the stand resists corrosion and daily wear common in industrial environments. The corrosion‑resistant finish ensures longevity and reduces maintenance intervals, which means less downtime and lower total cost of ownership for workshop equipment. The material choice also supports hygienic environments where cleanability is required, while preserving structural integrity under routine use. Ergonomic adjustment for practical use The height-adjustable range of 750–1000 mm enables ergonomic placement of displays and evaluation units at operator height, improving visibility and reducing strain during frequent readings. Quick adjustment allows technicians to set the optimal working height for bench, trolley or floor setups without complex tools. This straightforward adaptability enhances workflow efficiency and contributes to a safer, more productive working environment. Seamless integration with weighing systems Designed for mounting evaluation devices and indicators, the tripod is compatible with a wide range of scale accessories and display units used in industrial metrology. The compact design and 3 kg mass support portability between workstations while preserving precision during measurement tasks. Installation is uncomplicated; the stand serves as a practical elevation solution where stable, elevated mounting of weighing electronics is required. Contact Metav Werkzeuge in Emmerich to confirm compatibility with specific indicators and to arrange delivery or technical consultation for the KERN YKP-01 tripod stand Technical data Article number: YKP-01 Manufacturer: KERN GTIN: 4045761184367 Country of origin: CN Tariff number: 73269098 ECLASS: 21170601 Facts Weight: 3 kg Height adjustment: 750–1000 mm Special features Material: stainless steel with solid three‑leg tripod base Application: for elevating weighing indicators and evaluation units Category: Scales accessories (Waagen > Zubehör) SKU: YKP-01 FAQ Is the tripod suitable for all types of weighing indicators? The tripod stand is designed for mounting weighing indicators and evaluation units; compatibility depends on the indicator's base plate or mounting interface and can be checked with the YKP-01 specifications. How is the height adjusted and locked in place? Height adjustment is mechanical within the 750–1000 mm range and is secured by the stand's locking mechanism to ensure stable positioning of the mounted device. Can the stand be used in corrosive or humid environments? The stainless steel construction provides corrosion-resistant properties, making the tripod suitable for many workshop and laboratory conditions where increased durability is required. Is the tripod portable between workstations? At a compact weight of 3 kg, the tripod is intended for easy repositioning while maintaining a robust base for accurate measurement tasks. What information identifies the product for ordering or stock checks? Use the SKU YKP-01, GTIN 4045761184367 and manufacturer KERN when checking availability or ordering. Metav Werkzeuge, Emmerich am Rhein, Germany | info@metav-werkzeuge.com | +49 2822 7131930

Take advantage of the combination of long runtime, rapid recharge and proven KERN compatibility to keep weighing operations uninterrupted. Order the power module directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN GAB-A04 internal battery pack — up to 90 h runtime, approx. 12 h recharge The GAB-A04 is an internal rechargeable battery pack for KERN weighing instruments, designed to deliver extended operation between charges and secure measurement availability in workshop and industrial settings. Internal rechargeable battery operation Up to 90 h runtime (without backlight) Full recharge in approx. 12 h Compatible with KERN scale series Fewer interruptions thanks to extended operation The internal power module provides a long runtime of up to 90 h without backlight, which means extended periods of unattended measurement and less need for mains connection. For production environments and mobile weighing tasks this reduces process interruptions and allows measuring equipment to remain operational during shift changes or temporary site relocations. The specification assumes operation with the display backlight switched off; enabling illumination will reduce the runtime accordingly. Fast recharge to keep workflows moving A complete recharge takes approximately 12 h, allowing predictable scheduling of maintenance windows and ensuring the instrument is ready for the next workday. The charging characteristic supports efficient turnaround between uses, and the unit’s modest mass of 0.74 kg makes replacement and handling straightforward for workshop staff. These attributes contribute directly to higher equipment availability and lower indirect labour costs associated with battery management. Designed for seamless integration with KERN instruments This battery pack is intended as an internal accessory for KERN weighing devices and is supplied as a purpose-built power solution rather than a third-party retrofit. The design focuses on plug-and-play compatibility with the relevant scale range, simplifying installation and avoiding complex conversions. As a dedicated power module it maintains the instrument’s original operation modes and preserves calibration routines, supporting consistent measurement results in daily use. Reliability backed by a trusted distributor network Sourcing the power module through an established partner ensures dependable supply and after-sales continuity. Metav Werkzeuge acts as a quality filter for the European market, combining long-standing expertise with a wide product range to simplify procurement. The combination of component reliability and a dependable logistics partner reduces the risk of downtime and supports uninterrupted measurement capability in industrial and workshop environments. Contact Metav Werkzeuge in Emmerich to secure a KERN GAB-A04 for your scales or request further technical clarification via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: GAB-A04 Manufacturer: KERN GTIN: 4045761126473 Country of origin: CN Facts Weight: 0.74 kg Recharge time: 12 h Battery runtime: up to 90 h (without backlight) Tariff number: 85072080 ECLASS: 21059207 Special features Internal battery operation for scales Lead (Pb) battery chemistry Accessory for weighing equipment Product group: batteries / accumulators Segment: scale accessories FAQ Is the battery compatible with all KERN scales? The battery pack is designed for integration with the relevant KERN weighing instrument series; compatibility should be checked against the instrument model and specifications. How long does a full recharge take? A full recharge requires approximately 12 h under standard charging conditions for the GAB-A04 internal pack. What runtime can be expected in daily use? The specified runtime is up to 90 h without display backlight; using the backlight or additional functions will reduce available operating time. What type of battery is used in this module? The unit uses a lead (Pb) accumulator chemistry, specified for internal operation in compatible KERN instruments. Is the runtime affected by instrument settings? Yes. Features such as display illumination and frequent data transmissions shorten the battery life compared with the quoted figure for non-illuminated operation. KERN · Origin: CN · GTIN: 4045761126473

Combine compact RS‑232 connectivity, an included 1.5 m interface cable and direct compatibility with KERN floor, platform and pallet scales for reliable data transfer; order the interface directly via Metav Werkzeuge or consult our specialists for configuration advice. KFN-A01 RS-232 data interface – KERN, for floor and pallet scales, includes 1.5 m cable The KFN-A01 RS-232 data interface delivers dependable serial communication for KERN floor scales, stainless-steel platform scales and pallet scales, enabling straightforward transfer of weighing data to terminals or PCs. RS-232 serial interface with cable 1.5 m interface cable supplied Compatible with KERN BFN, SFB and UFN Streamlined data capture for process control The RS‑232 standard remains a robust choice for industrial weighing applications thanks to its simple, well-documented wiring and broad device support. By offering a dedicated serial connection the interface secures fast data capture from scales into data loggers, label printers or legacy terminals without intermediary conversion. For production environments this means fewer protocol issues, reduced integration time and a predictable data flow from the weighing point to backend systems. The clear, unambiguous signal format reduces the need for repeat readings and supports traceable record keeping. Fast installation and assured compatibility The KFN‑A01 arrives with a 1.5 m interface cable ready for immediate connection, minimising setup time on the workshop floor. Intended for KERN models such as BFN (floor scales), SFB (stainless-steel platform) and UFN (pallet scales), the module is supplied as a factory-fit option and is not retrofittable, so planning for initial integration is advised. The compact module and supplied lead support neat cable routing and straightforward mounting, helping to avoid common installation delays and maintain the uptime of weighing processes. Reliable workflow and supply assurance Compact in design and light in weight, the interface contributes to a tidy installation that integrates with production routines and measurement systems. Choosing accessories from established brands and a trusted distributor reduces procurement risk: Metav combines decades of precision expertise with central supply from Emmerich, a broad product range and consistent stock handling. This supplier reliability supports uninterrupted operations and aligns with quality-driven purchasing policies in industry and trade. For fast supply and expert advice on the KFN-A01 RS-232 data interface, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: KFN-A01 Manufacturer: KERN SKU: KFN Facts Weight: 0.15 kg Cable length: 1.5 m Special features Interface: RS-232 Compatible with: KERN BFN, KERN SFB, KERN UFN Not retrofittable Supplied: interface cable 1.5 m FAQ What types of scales is the interface compatible with? The KFN-A01 RS-232 data interface is compatible with KERN floor scales (BFN), stainless-steel platform scales (SFB) and pallet scales (UFN). Is the interface supplied with a cable? Yes, the product is supplied with an included interface cable of 1.5 m length for immediate connection. Can the RS‑232 interface be retrofitted to existing scales? The interface is specified as not retrofittable; it is intended for original-fit installation on the compatible KERN models. Which data destinations can receive signals from this interface? The RS‑232 output is suited to PCs, terminals, label printers and data loggers that accept serial input in standard ASCII or configured protocols. How heavy is the module and how does that affect installation? The module has a weight of 0.15 kg, allowing discreet mounting with minimal impact on scale handling and cabling. Manufacturer: KERN · Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930

Take advantage of the combination of compatibility with KERN BFN, UFN and NFN, reliable stable support for precision weighing, and rapid dispatch from Emmerich to keep calibration and measuring routines uninterrupted. Order the stand directly via Metav Werkzeuge or ask our consultants for clarification. BFN-A04 Stand for BFN, UFN and NFN by KERN — compatible scale accessory BFN-A04 is a dedicated stand designed to support KERN scale systems, offering stable mounting for precision weighing applications in workshops and production environments. KERN accessory for BFN, UFN and NFN Stable support for precise weighing Simple mounting and secure fitting Rapid dispatch from Emmerich Stable support for consistent measurement results A properly chosen support reduces variability in weighing and measurement tasks. The BFN-A04 stand provides a secure platform that helps maintain precision across repeated measurements, lowering fluctuation and improving reproducibility. Compatibility with the specified KERN models ensures interfacing without improvised adapters, which translates into fewer setup errors and a more reliable measuring process for lab benches and workshop scales. Faster installation keeps workflows moving Time spent aligning and mounting equipment is time away from production. The stand is engineered for straightforward mounting and secure fitting with compatible scale units, helping to minimise installation time and reduce downtime. Clear interfaces and model-specific compatibility mean fewer steps to get measuring equipment into service, supporting efficient changeovers and quicker calibration cycles in busy environments. Sourcing and logistics that support operational continuity Metav's distribution from Emmerich combines a broad product range with dependable logistics. Relying on a known accessory such as this stand reduces procurement complexity and supports predictable replenishment. Metav Werkzeuge’s long-standing marketplace presence and extensive product portfolio back a steady supply chain, so installations and repairs can proceed without administrative delays. Who benefits from this accessory Workshops, calibration labs and production lines that use KERN scale equipment will value the robust mounting and direct compatibility of the stand. The accessory suits environments where stable, repeatable weighing is required and where fast, uncomplicated integration of scale components supports daily operations and quality assurance routines. For secure mounting of KERN scale units, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to request product availability and expert advice. Technical Data Article number: BFN-A04 Manufacturer: KERN Designation: Stand for BFN, UFN and NFN Category: Accessories for scales Core data ECLASS: 21170601 Special features Compatibility: for BFN, UFN and NFN Application area: accessories for weighing systems Sales channel: available via Metav Werkzeuge with rapid dispatch FAQ Which KERN models is the stand compatible with? The stand is compatible with the KERN BFN, UFN and NFN series and is intended for use with those scale models. What purpose does the stand serve in a weighing setup? The stand provides stable mechanical support to improve precision and reproducibility when using compatible KERN weighing units. Is the stand suitable for workshop and production environments? Yes, the design targets workshop and production use where a secure, model-specific mount for scale units is required. How straightforward is assembly of the stand? Assembly is designed to be straightforward, with model-specific interfaces that simplify securing the scale unit and reduce setup time. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930

KERN Analogue Module Technical Data: and Summary:Manufacturer: KERNSeries: KFBModel: Analog ModuleOrder now Analogue Module Online.

Summary and Technical Data for KERN Y-Schnittstellenkabel :Manufacturer: KERNSeries: CFSModel: Y-SchnittstellenkabelOrder your new Y-Schnittstellenkabel now Online!

Reliable RS-232 data transfer combined with a 1.5 m cable length and a compact weight of 0.07 kg enables straightforward integration into existing workshop and laboratory setups; Order the CFS-A01 directly via Metav Werkzeuge or ask our consultants if needed CFS-A01 RS-232 interface cable by KERN — 1.5 m, lightweight A CFS-A01 RS-232 interface cable for linking precision scales and terminals to data acquisition systems, designed for reliable serial communication in industrial and workshop environments RS-232 interface for stable data transfer 1.5 m length for flexible device placement Compatible with KERN scales and terminals Lightweight 0.07 kg for easy handling Stable serial connection for precise measurement transfer The RS-232 protocol remains a standard for reliable, real-time data transmission in metrology and weighing applications. This serial lead ensures consistent data flow from measuring instruments to terminals or PCs, reducing the risk of transmission errors that can affect traceability. Built for industrial use, the cable supports common serial communication requirements and simplifies integration into existing measurement chains. The minimal signal loss and shielding typical of RS-232 connections help maintain measurement integrity during logging or process control. Flexible installation that suits bench and test environments With a 1.5 m length the lead offers practical reach between bench-top scales and nearby data collection hardware without excess cable clutter. The cable’s moderate span enables tidy routing behind workstations and straightforward placement in racks or carrying cases. Its design supports rapid reconnection and reduces setup time during shift changes or when moving devices between test stations, contributing to improved uptime and a smoother workflow in production and laboratory contexts. Compact handling and dependable supply chain quality The cable’s lightweight build (0.07 kg) makes handling and storage effortless, while still meeting the robustness expected for workshop accessories. As part of Metav’s curated offering, this accessory is supplied with a consistent quality filter from Emmerich, ensuring reliable availability for industry users. The combination of compact dimensions and dependable manufacture reduces logistical friction and supports uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge for purchasing or specialist advice on integrating the CFS-A01 into existing measurement systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CFS-A01 Manufacturer: KERN GTIN: 4045761245198 Country of origin: CN Measurements / Core data Cable length: 1.5 m Weight: 0.07 kg Special features Interface: RS-232 Category: Scales → Accessories Intended use: Connection of scales and terminals for data transfer FAQ What interface does the cable use? The CFS-A01 uses an RS-232 serial interface for stable, real-time data transfer between scales and downstream devices. What is the usable cable length? The cable provides a fixed length of 1.5 m, offering practical reach for bench and workstation arrangements. Is the cable compatible with KERN weighing instruments? Yes, the lead is specified for use with KERN scales and terminals and is intended for direct serial connections where RS-232 is supported. How heavy is the cable and how does that affect handling? Weighing 0.07 kg, the lead is lightweight and easy to route, store and reconnect without adding significant bulk to instrument setups. Can the cable be used with modern PCs without a serial port? The CFS-A01 communicates via RS-232; for PCs lacking a serial port, a USB-to-RS232 adapter can be used to bridge the connection. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930

Take advantage of the 15 m special length and the secure link between indicator and platform for flexible scale installation; compatibility notes require checking models with optional calibration before purchase. Order the cable directly via Metav Werkzeuge or consult our specialists for application advice. BFB-A03 connection cable for scales by KERN — 15 m special length The BFB-A03 is a 15 m connection cable designed to link a scale indicator and its weighing platform, suitable for industrial and workshop weighing setups where extended separation is required 15 m special length for flexible layouts Designed for indicator-to-platform connection Not retrofit‑compatible on calibrated models Suitable for industrial weighing installations Flexible installation that keeps the workspace organised The extended 15 m run enables placing the weighing indicator at a convenient workstation while the platform remains in the process area, so measurement points and operator stations can be separated without resorting to makeshift extensions. This layout reduces clutter on the bench and minimises the need to reposition heavy platforms, delivering a more efficient workflow. The long reach also simplifies integration into existing production lines where direct proximity is impractical. Clear compatibility guidance to avoid costly errors Compatibility is decisive when selecting this accessory. The cable is intended specifically for connection between evaluation unit and platform and is not retrofit‑compatible on models with optional calibration, which means certain scale configurations require ordering the cable at the time of initial system specification. For installations where calibration options have been selected later, an alternative factory‑approved connection must be used. This transparency prevents downtime and supports a reliable measuring chain. Practical benefits for industrial weighing applications Beyond mere length, the design focuses on dependable signal transmission and straightforward installation in workshop and industrial contexts. The robust construction suits routine handling and fixed installations, helping to maintain consistent measurement performance. Combined with Metav Werkzeuge’s role as a quality filter for the European market, the accessory contributes to a predictable supply chain and dependable product selection for professionals seeking long‑term reliability. Contact Metav Werkzeuge in Emmerich for compatibility checks and to secure the KERN BFB-A03 15 m connection cable — expert advice and prompt dispatch available from our warehouse to your workbench Technical data Article number: BFB-A03 Manufacturer: KERN GTIN: 4045761161788 Country of origin: China Core data Cable length: 15 m Weight: 3.5 kg Tariff code: 84239010 eCl@ss: 21131814 Special features Function: connection between indicator and platform Note: not retrofit-compatible for models with optional calibration Product group: scales accessories Category path: Scales › Accessories FAQ Is this cable suitable for remote mounting of the indicator? The BFB-A03 cable by KERN is intended precisely for remote mounting, enabling the indicator to be positioned up to 15 m from the platform for ergonomic or process-driven installations. Can the cable be fitted afterwards if calibration was added later? No, the cable is not retrofit‑compatible on models that use an optional calibration package; the BFB-A03 must be confirmed as suitable for the specific scale configuration before procurement. Which devices is the BFB-A03 compatible with? Compatibility depends on the scale model and its factory options; the BFB-A03 is a connection cable for indicator-to-platform links on compatible KERN weighing systems. Where does this cable ship from and who supplies it? The KERN BFB-A03 is supplied via Metav Werkzeuge’s stock in Emmerich, with logistics set up for reliable delivery to industrial and workshop customers. Manufacturer: KERN — Origin: China

Take advantage of robust floor anchoring and consistent weighing results with a dedicated, lightweight KERN footplate solution for BFN and NFN scales; the design ensures legal compliance for calibrated installations and a compact option where a ramp or pit frame is unsuitable. Order the footplate pair directly via Metav Werkzeuge or ask our consultants if needed. Footplate pair for BFN and NFN (BFN-A03) — KERN floor fixing plates for weighing bridges A footplate pair for BFN and NFN by KERN designed to secure the weighing bridge to the floor in calibrated scale installations, providing a stable and legally compliant mounting option. For KERN BFN and NFN floor scales Secures weighing bridge to the floor Not retrofittable; dedicated fit Lightweight: 0.7 kg for the pair Consistent weighing through secure floor anchoring For legally calibrated systems, reliable floor fixation of the weighing bridge is a practical necessity: it prevents movement, reduces measurement scatter and supports traceable results for quality control. The BFN-A03 footplate pair provides a dedicated solution for KERN BFN and NFN installations, offering a compact alternative when a ramp or pit frame is not used. By fixing the weighing bridge at defined points, the plates help maintain stability across repeated cycles and contribute to demonstrable compliance during inspections. This focused approach reduces uncertainty in process weighing and supports efficient production monitoring. Dedicated fit and predictable installation behaviour The design prioritises a specific model fit and therefore is not retrofittable, which simplifies selection and installation planning for procurement and workshop teams. The compact pair combines a small footprint with the functional benefit of direct anchoring to the subfloor, making it suitable where space or pit construction is limited. At approximately 0.7 kg, the assembly is lightweight yet intended to deliver secure contact between the weighing bridge and the floor. Clear specification of the intended models reduces ambiguity in logistics and ensures the mounting option matches the scale chassis for reliable long-term performance. Selection guidance to support accuracy and uptime When deciding between fixation options, consider the operational context: a ramp, a pit frame or a dedicated footplate pair each address different site constraints and service needs. The footplate pair is an economical way to meet calibration requirements without major civil works, delivering reproducible mounting points and helping to protect service intervals by reducing movement-induced wear. For procurement and maintenance planning, this solution offers an efficient balance of practicality and conformity to calibration rules while supporting uninterrupted measurement quality and operational confidence. For reliable floor fixing of KERN weighing bridges, contact Metav Werkzeuge in Emmerich for tailored advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical data Article number: BFN-A03 SKU: BFN-A03 Manufacturer: KERN GTIN: 4045761145436 Origin: CN Commodity code: 84239010 Facts Weight: 0.7 kg ECLASS: 21130190 Special features Suitable for KERN BFN and NFN Not retrofittable Recommended fixation option for calibrated scales; alternatives: ramp or pit frame FAQ What models are compatible with these floor plates? The footplate pair is specified for KERN BFN and NFN floor scales and is supplied as the BFN-A03 mounting set for those models. Can the footplate pair be fitted to other scale types? No, the BFN-A03 is a dedicated fit and is not retrofittable to other models; it is intended specifically for the KERN BFN and NFN range. Why choose a footplate pair instead of a ramp or pit frame? The footplate pair offers a compact, low-impact method to fix the weighing bridge to the floor, suitable where full pit installation or ramps are impractical and where calibration requires defined floor anchoring. Does the package include multiple plates or accessories? The product is supplied as a pair of floor plates intended to secure the weighing bridge; consult the product listing for scope of delivery details before ordering. Will using the footplate pair affect calibration or inspection? When installed as the specified floor-fixing option for BFN and NFN systems, the footplate pair supports consistent mounting required for calibrated scales and assists in meeting inspection criteria. KERN — Origin: China — GTIN: 4045761145436