ODMW060508T-A27 WKP35G Wendeplatten - Walter Tools

The combination of Tiger‑tec Gold wear resistance, the WKP35G grade and a 15° clearance angle ensures consistent productivity and reliable chip control in demanding milling operations; benefit from extended tool life and stable cutting results. Order the ODMW060508T‑A27 WKP35G milling insert directly via Metav Werkzeuge or request application advice from the consultants if required.

ODMW060508T‑A27 WKP35G Milling insert (steel & cast iron) – Walter Tools

The ODMW060508T‑A27 WKP35G is an octagonal milling insert engineered for productive machining of steel and cast iron in general milling applications.

• Tiger‑tec Gold coating for extended tool life
• Grade WKP35G for steel and cast iron
• 15° clearance angle for stable cutting
• Octagonal 06 shape with 0.8 mm corner radius

Maximised productivity through coating and grade

The combination of the Tiger‑tec Gold coating and the WKP35G grade provides a high‑performance solution for interrupted and continuous milling. The multi‑layer coating system reduces adhesive and abrasive wear, which extends tool life and keeps cutting edges sharper for longer. As a result, cycle times are reduced and tool change frequency is lower, translating directly into improved machine utilisation and lower process costs. The coated carbide substrate is balanced to withstand the thermal and mechanical loads typical when machining P (steel) and K (cast iron) workpieces.

Reliable material compatibility and process stability

Designed for P and K groups according to ISO 513, this insert is tailored to the specific chip formation and wear mechanisms of steel and cast iron. The specified geometry supports controlled chip breakage and evacuation, limiting the risk of rework due to poor surface finish or edge failure. By using an insert with proven material compatibility, shops gain predictable tool life and repeatable part quality, which simplifies planning for production runs and reduces scrap rates.

Geometry that supports cutting performance and edge security

The octagonal form (06) and the 0.8 mm corner radius deliver a compromise between edge strength and cutting finesse. The 15° clearance angle provides secure engagement and reduces rubbing on the flank face, improving dimensional accuracy and surface integrity. The built‑in chipbreaker A27 is optimised to assist fracture and control of chips in typical milling tasks, helping to avoid long, entangling swarf and to maintain a stable cutting process under varying cutting conditions.

Practical handling, mounting and application benefits

The insert’s standard designation and tolerance class M make it straightforward to integrate into established milling systems and toolholders, simplifying inventory and changeover. The octagonal shape allows multiple indexings per insert, increasing the number of usable cutting edges and lowering per‑edge cost. For workshops aiming to increase uptime and reduce tooling overhead, this indexable insert presents a practical balance of performance and economy while remaining compatible with common milling setups.

Request application advice from Metav Werkzeuge for the Walter Tools ODMW060508T‑A27 WKP35G insert to optimise cutting data and tool life, and to check current availability in the required grade and geometry

Technical data

• SKU: ODMW060508T-A27-WKP35G-WALTER
• Article: ODMW060508T-A27 WKP35G
• Manufacturer: Walter Tools

Core specifications

• Clearance angle: 15°
• Corner radius: 0.8 mm
• Plate size: 06
• Plate thickness: 05
• Tolerance class: M

Features

• Grade: WKP35G
• Series: Tiger‑tec Gold
• Substrate/coating: coated carbide
• Suitable for: steel (P) and cast iron (K)
• Chipbreaker: A27
• Shape: octagonal

FAQ

Which materials are suitable for this insert?
The insert is specified for machining steel (P) and cast iron (K); the WKP35G grade and Tiger‑tec Gold coating are optimised for these material groups.

What are the key geometry parameters to consider?
Important values are the 15° clearance angle and the 0.8 mm corner radius; these influence edge strength, cutting forces and surface finish for typical milling tasks.

How many cutting edges are available per insert?
The octagonal shape (06) provides multiple indexable edges, permitting several re‑uses of the insert before replacement, which improves cost efficiency.

Is the chip control suitable for interrupted cuts?
Yes, the A27 chipbreaker combined with the coated grade supports stable chip formation and evacuation in both continuous and interrupted milling conditions.

Can this insert be used with standard Walter toolholders?
The designation and tolerance class M are compatible with common milling systems; confirmation with the chosen toolholder is recommended for correct seating and clamping.

Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen

Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product of the manufacturer.