20mm A16R PWLNL Boring Bar PWLN for WNMG 0604, 95° Cut Angle, 16mm Shank - Teknik Makina
€55.00
Product information "20mm A16R PWLNL Boring Bar PWLN for WNMG 0604, 95° Cut Angle, 16mm Shank - Teknik Makina"
Take advantage of the combination of rigid clamping and precise insert compatibility for consistent turning results; the 16 mm shank and compatibility with WNMG 0604 inserts ensure stable performance in left-hand operations. Order the tool via Metav Werkzeuge or consult Metav's specialists for application-specific advice.
A16R PWLNL Boring Bar – PWLN for WNMG indexable inserts, 16 mm shank (Teknik Makina)
the A16R PWLNL boring bar is a left-hand turning toolholder optimised for external machining with WNMG 0604 indexable inserts, offering extended reach and secure clamping for demanding workshop use
- 16 mm shank diameter for stable clamping
- Compatible with WNMG 0604 indexable inserts
- 95° cutting angle for secure chip control
- 200 mm overall length for extended reach
Stable clamping and reproducible cutting performance
The design centres on a 16 mm shank that provides a secure connection to the tool post, reducing vibration and increasing repeatability. This rigidity translates into consistent surface finish and longer insert life when machining steels and general-purpose materials. The ISO designation A16R PWLNL denotes the shank and holder geometry, enabling straightforward tool selection and compatibility checks in CNC setups. By focusing on mechanical stability, the holder supports higher feed rates without compromising part accuracy.
Insert compatibility that simplifies setup and inventory
Built for WNMG 0604 indexable inserts, the toolholder accepts standard negative inserts common across many workshops, simplifying tooling logistics. The 95° cutting angle is tuned for effective chip formation and edge engagement, which helps maintain predictable cutting forces and reduces the risk of chatter. For procurement and maintenance teams, the use of established insert types minimises the need for specialised stock and accelerates changeover times on multi-shift lines.
Extended reach with controlled chip flow and access
With an overall length of 200 mm and a nominal diameter of 20 mm, the boring bar is engineered to reach deeper external features while maintaining control over chip evacuation. The left-hand cutting direction suits operations where tool orientation or part clamping dictates reverse approach tooling. A measured mass of 0.316 kg keeps inertia low, aiding rapid spindle speed changes and improving dynamic response during interrupted cuts. These characteristics combine to offer a balance between reach and stability for medium-duty turning tasks.
Practical use cases and workshop integration
This holder is aimed at industrial and professional workshops requiring a reliable solution for external turning with indexable inserts. Typical applications include finishing and semi-finishing of turned parts where a compact holder with predictable engagement is needed. The compatibility with established insert geometries and the clear ISO marking contribute to fast tool management and predictable replacement cycles. If application details require validation, Metav's specialists can supply further cutting data and mounting advice to match the machining setup.
Choose Teknik Cutting Tools' A16R PWLNL boring bar for robust left-hand machining — contact Metav Werkzeuge in Emmerich for tailored technical guidance and reliable supply via info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: P388TM
- Manufacturer: Teknik Makina
Facts
- Shank diameter: 16 mm
- Diameter: 20 mm
- Overall length: 200 mm
- Cutting angle: 95°
- Cutting height: 40 mm
- Weight: 0.316 kg
Special features
- ISO designation: A16R PWLNL
- Compatible inserts: WNMG 0604
- Cutting direction: left
- eClass: 21180806
FAQ
What insert size is recommended for this boring bar?
The A16R PWLNL boring bar (P388TM) is specified for WNMG 0604 indexable inserts, which fit the pocket and deliver the intended cutting geometry for left-hand external turning.
Is the holder suitable for deep-reach turning operations?
Yes, the holder’s 200 mm overall length and 20 mm diameter provide extended reach while maintaining control; the mass of 0.316 kg helps preserve dynamic stability during longer overhangs.
Which cutting direction is intended for this tool?
The toolholder is manufactured for left-hand cutting, making it appropriate for setups and lathes that require reverse-orientated tooling.
How is the tool identified for procurement and replacement?
Identification is via the SKU P388TM and the ISO designation A16R PWLNL; Teknik Makina specifies these markings for consistent procurement and replacement.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Bohrstange |
| Diameter-1: | 20mm |
Passende Wendeplatten MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Specifications for indexable inserts WNMG 060404 from MetavCUT Brand: MetavCUT Manufacturer Order Number: WNMG060404-Steel ISO-Code: WNMG060404 Material: cemented carbide Form: trigon Usable to the work on: Stahl Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-WNMG-060404-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features WNMG 060412 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: WNMG060412-Steel Facts and Figures: ISO-Code: WNMG060412 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-WNMG-060412-Stahl-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product details for WNMG 060408 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: WNMG060408-Stainless Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-WNMG-060408-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts WNMG 060404 from MetavCUT Brand: MetavCUT Manufacturer Order Number: WNMG060404-Stainless Dataand Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-WNMG-060404-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product features for WNMG 060408 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: WNMG060408-Steel ISO-Code: WNMG060408 Usage for: Steel Material: cemented carbide Form: trigon Usable to the work on: Stahl Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-WNMG-060408-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product details for WNMG 060412 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: WNMG060412-Stainless ISO-Code: WNMG060412 Usage for: Stainless steel Material: cemented carbide Form: trigon Usable to the work on: Stainless Steel Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 1.2 Chip Breaker: double-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-WNMG-060412-Stainless Steel-MetavCUT 40END
Passende Wendeplatten ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product characteristics for WNMG 060404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-PPIC807 Dataand Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-WNMG-060404-IC807-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts WNMG 060404 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-NFIC8250 Series: ECO FLASHTURN ISO-Code: WNMG060404 Grade: IC8250 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-WNMG-060404-IC8250-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts WNMG 060408 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-F3PIC8250 Facts and Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-WNMG-060408-IC8250-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for insert WNMG 060412 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060412-F3MIC6015 Facts for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: IC6015 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060412-IC6015-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features WNMG 060408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-GNIC9250 Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: IC9250 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060408-IC9250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts WNMG 060408 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-TFIC9250 Series: ECO FLASHTURN ISO-Code: WNMG060408 Grade: IC9250 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060408-IC9250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Specifications indexable inserts WNMG 060408 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-TFIC830 Data/ Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC830 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-WNMG-060408-IC830-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts WNMG 060408 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-TFIC8250 Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060408-IC8250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product characteristics indexable inserts WNMG 060412 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060412-TFIC907 Figures for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 1.2 Features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-WNMG-060412-IC907-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features WNMG 060408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-F3MIC830 Series: ECO FLASHTURN ISO-Code: WNMG060408 Grade: IC830 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-WNMG-060408-IC830-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for WNMG 060408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-PPIC907 Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060408-IC907-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for WNMG 060408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-PPIC8350 Dataand Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: IC8350 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-WNMG-060408-IC8350-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts WNMG 060412 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060412-M3MIC806 Facts / Figures: ISO-Code: WNMG060412 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060412-IC806-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Design details for indexable inserts WNMG 060404 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-F3PIC8250 Series: ECO FLASHTURN ISO-Code: WNMG060404 Grade: IC8250 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060404-IC8250-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts WNMG 060402 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060402-NFIC907 Facts for the tool: ISO-Code: WNMG060402 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.2 Features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-WNMG-060402-IC907-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details WNMG 060402 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060402-NFIC807 Series: ECO FLASHTURN ISO-Code: WNMG060402 Grade: IC807 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.2 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-WNMG-060402-IC807-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for WNMG 060404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-TFIC807 Series: ECO FLASHTURN ISO-Code: WNMG060404 Grade: IC807 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060404-IC807-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Design details WNMG 060404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-SWFIC8250 Facts & Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-WNMG-060404-IC8250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts WNMG 060404 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-PPIC907 Dataand Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060404-IC907-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts WNMG 060408 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-M3MIC806 Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-WNMG-060408-IC806-ISCAR 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Design details for insert WNMG 060408 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-M3MIC6025 Facts & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-WNMG-060408-IC6025-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Information on technical features for indexable inserts WNMG 060404 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-F3PIC807 Series: ECO FLASHTURN ISO-Code: WNMG060404 Grade: IC807 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-WNMG-060404-IC807-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for WNMG 060404 insert from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-F3PIC20N Facts for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC20N with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060404-IC20N-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts WNMG 060404 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-F3MIC830 Facts & Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: IC830 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060404-IC830-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Information on technical features for WNMG 060408 insert from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-F3MIC6025 Series: ECO FLASHTURN ISO-Code: WNMG060408 Grade: IC6025 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-WNMG-060408-IC6025-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product details indexable inserts WNMG 060404 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-WGIC807 Facts for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-WNMG-060404-IC807-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for WNMG 060404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-WGIC530N Facts & Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: IC530N with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-WNMG-060404-IC530N-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features WNMG 060404 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-TFIC9250 Facts for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC9250 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-WNMG-060404-IC9250-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Information on technical features for indexable inserts WNMG 060404 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-TFIC907 Data/ Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-WNMG-060404-IC907-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for WNMG 060408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060408-M3PIC807 Data & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-WNMG-060408-IC807-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts WNMG 060404 from ISCAR Brand: ISCAR Manufacturer Order Number: WNMG060404-F3MIC6015 Series: ECO FLASHTURN ISO-Code: WNMG060404 Grade: IC6015 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-WNMG-060404-IC6015-ISCAR 40END
Passende Wendeplatten Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408RP-KCU25-KENNAMETAL Facts and Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCU25 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCU25-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Product characteristics WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408RP-KCU10B-KENNAMETAL Facts / Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060408-KCU10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Performance features WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408RP-KCP25C-KENNAMETAL Facts / Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060408-KCP25C-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408RP-KCP25-KENNAMETAL Facts / Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KCP25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for insert WNMG 060412 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060412RP-KCP25C-KENNAMETAL Dataand Figures: ISO-Code: WNMG060412 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 1.2 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060412-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts WNMG 060412 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060412RN-KCP25-KENNAMETAL Figures for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060412-KCP25-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product features indexable inserts WNMG 060412 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060412MV-KCP25C-KENNAMETAL Figures for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 1.2 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060412-KCP25C-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product features for WNMG 060412 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060412MN-KCP25-KENNAMETAL ISO-Code: WNMG060412 Grade: KCP25 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 1.2 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060412-KCP25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408RN-KCP25B-KENNAMETAL Facts / Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25B with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCP25B-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408RN-KCP25-KENNAMETAL Data & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KCP25-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408RN-KCP10B-KENNAMETAL ISO-Code: WNMG060408 Grade: KCP10B Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060408-KCP10B-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Information on technical features for indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MW-KCP25-KENNAMETAL ISO-Code: WNMG060408 Grade: KCP25 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KCP25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408UN-KCK20B-KENNAMETAL ISO-Code: WNMG060408 Grade: KCK20B Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KCK20B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Performance features WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408UN-KCK15-KENNAMETAL Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KCK15 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCK15-Kennametal 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Product characteristics for indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MW-KCP10-KENNAMETAL ISO-Code: WNMG060408 Grade: KCP10 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KCP10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Specifications for WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MV-KCP25C-KENNAMETAL Dataand Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MV-KCP10B-KENNAMETAL Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP10B with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCP10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MS-KCU25-KENNAMETAL ISO-Code: WNMG060408 Grade: KCU25 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCU25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MS-KCU10-KENNAMETAL Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KCU10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MS-KC5025-KENNAMETAL ISO-Code: WNMG060408 Grade: KC5025 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KC5025-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MS-KC5010-KENNAMETAL ISO-Code: WNMG060408 Grade: KC5010 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060408-KC5010-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MN-KCP30-KENNAMETAL Dataand Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP30 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCP30-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications for WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MN-KCP25C-KENNAMETAL ISO-Code: WNMG060408 Grade: KCP25C Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MN-KCP25B-KENNAMETAL Facts & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCP25B with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCP25B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MN-KCP25-KENNAMETAL ISO-Code: WNMG060408 Grade: KCP25 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCP25-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Features WNMG 060404 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404MN-KCP25C-KENNAMETAL Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060404-KCP25C-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details inserts WNMG 060404 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FW-KT315-KENNAMETAL Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060404-KT315-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features inserts WNMG 060404 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FW-KCU10-KENNAMETAL Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060404-KCU10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MR-KCM15B-KENNAMETAL ISO-Code: WNMG060408 Grade: KCM15B Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCM15B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Specifications for indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MP-KCM15-KENNAMETAL Facts & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCM15 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060408-KCM15-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408MP-KC5010-KENNAMETAL Dataand Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KC5010-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FW-KCU10B-KENNAMETAL Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCU10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Specifications for WNMG 060408 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FW-KCP10-KENNAMETAL Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCP10-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product specifications for insert WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FV-KTP10-KENNAMETAL Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KTP10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KTP10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Specifications for indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FV-KCP25C-KENNAMETAL Data & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KCP25C-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Specifications for WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FP-KCP10-KENNAMETAL Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCP10-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product features for WNMG 060408 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FP-KCM15-KENNAMETAL Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCM15 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KCM15-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for WNMG 060404 insert from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FV-KTP10-KENNAMETAL Facts / Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KTP10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060404-KTP10-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data inserts WNMG 060404 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FV-KCP10B-KENNAMETAL Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KCP10B with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060404-KCP10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Specifications for indexable inserts WNMG 060404 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FP-KCU10B-KENNAMETAL Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060404-KCU10B-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for WNMG 060404 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FP-KC5010-KENNAMETAL Facts for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060404-KC5010-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications for indexable inserts WNMG 060404 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FN-KT315-KENNAMETAL Facts and Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060404-KT315-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features insert WNMG 060404 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FN-KCP10-KENNAMETAL Facts for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060404-KCP10-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Specifications for WNMG 060404 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FF-KCU10B-KENNAMETAL ISO-Code: WNMG060404 Grade: KCU10B Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060404-KCU10B-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for WNMG 060404 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404FF-KCU10-KENNAMETAL Facts & Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-WNMG-060404-KCU10-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FN-KCP10-KENNAMETAL Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCP10-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FF-KCU10B-KENNAMETAL Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060408-KCU10B-Kennametal 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product features WNMG 060408 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FF-KCP10-KENNAMETAL Data/ Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-WNMG-060408-KCP10-Kennametal 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Product characteristics indexable inserts WNMG 060408 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060408FF-KC5010-KENNAMETAL Data/ Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060408-KC5010-Kennametal 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a picture of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us a sample insert or drawing by post Design details indexable inserts WNMG 060404 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404MP-KCU10-KENNAMETAL Data/ Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-WNMG-060404-KCU10-Kennametal 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Product characteristics for indexable inserts WNMG 060404 from Kennametal Brand: Kennametal Manufacturer Order Number: WNMG060404MP-KCM25B-KENNAMETAL ISO-Code: WNMG060404 Grade: KCM25B Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-WNMG-060404-KCM25B-Kennametal 40END
Passende Wendeplatten Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts WNMG 060404 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404LC1515-SANDVIK Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 1515 Chip Breaker: LC with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060404-1515-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts WNMG 060404 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404LC4315-SANDVIK Dataand Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 4315 Chip Breaker: LC with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060404-4315-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404MF1115-SANDVIK Dataand Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1115 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060404-1115-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for WNMG 060404 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404MF1125-SANDVIK Facts / Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1125 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060404-1125-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts WNMG 060404 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404MF2015-SANDVIK Data & Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060404-2015-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Specifications WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404MF2025-SANDVIK Data & Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060404-2025-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product details for indexable inserts WNMG 060404 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404MF2220-SANDVIK Facts for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 2220 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060404-2220-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404MF5015-SANDVIK Facts and Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 5015 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060404-5015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404PF1515-SANDVIK ISO-Code: WNMG060404 Grade: 1515 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: PF Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060404-1515-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features for WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404PF1525-SANDVIK Facts for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1525 Chip Breaker: PF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060404-1525-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404PF4325-SANDVIK Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060404-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404PF5015-SANDVIK Dataand Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 5015 Chip Breaker: PF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060404-5015-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Specifications for indexable inserts WNMG 060404 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404SM1105-SANDVIK ISO-Code: WNMG060404 Grade: 1105 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: SM Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060404-1105-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts WNMG 060404 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404-SM1205-SANDVIK ISO-Code: WNMG060404 Grade: 1205 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: -SM Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060404-1205-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404WF1515-SANDVIK ISO-Code: WNMG060404 Grade: 1515 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: WF Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060404-1515-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404WF2015-SANDVIK Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 2015 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060404-2015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product characteristics for WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404WF3210-SANDVIK Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 3210 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060404-3210-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404WF3225-SANDVIK Facts and Figures: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 3225 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060404-3225-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404WF4315-SANDVIK Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060404-4315-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for insert WNMG 060404 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404WF4415-SANDVIK ISO-Code: WNMG060404 Grade: 4415 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: WF Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060404-4415-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404WL1515-SANDVIK Figures for the tool: ISO-Code: WNMG060404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1515 Chip Breaker: WL with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060404-1515-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features for WNMG 060404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060404XFGC15-SANDVIK ISO-Code: WNMG060404 Grade: GC15 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060404-GC15-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408KM3225-SANDVIK ISO-Code: WNMG060408 Grade: 3225 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: KM Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-3225-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Performance features indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408LC4315-SANDVIK Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4315 Chip Breaker: LC with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-4315-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Technical data for WNMG 060408 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408LC4325-SANDVIK ISO-Code: WNMG060408 Grade: 4325 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-4325-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408LC4425-SANDVIK Dataand Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: LC with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060408-4425-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MF1115-SANDVIK Data & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 1115 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-1115-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Information on technical features indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MF1125-SANDVIK Facts & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 1125 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-1125-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product details for WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MF2015-SANDVIK Dataand Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-2015-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MF2025-SANDVIK Data/ Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-2025-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MF4425-SANDVIK Facts & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: MF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-4425-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MM1125-SANDVIK ISO-Code: WNMG060408 Grade: 1125 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: MM Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060408-1125-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Product details indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MM2015-SANDVIK ISO-Code: WNMG060408 Grade: 2015 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: MM Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-2015-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MM2035-SANDVIK Facts / Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 2035 Chip Breaker: MM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-2035-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Performance features indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MM2220-SANDVIK Facts & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 2220 Chip Breaker: MM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-2220-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MR2015-SANDVIK Facts & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MR with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-2015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408MR2220-SANDVIK Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 2220 Chip Breaker: MR with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-2220-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408PF1525-SANDVIK ISO-Code: WNMG060408 Grade: 1525 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: PF Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-1525-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Specifications for WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408PF4305-SANDVIK Data & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4305 Chip Breaker: PF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-4305-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Specifications indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408PF4325-SANDVIK Dataand Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-4325-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408PF4415-SANDVIK Facts / Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: PF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product characteristics inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408PF4425-SANDVIK Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: PF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408PM4405-SANDVIK ISO-Code: WNMG060408 Grade: 4405 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: PM Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-4405-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Features for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408PR4325-SANDVIK Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Design details for WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408PR4415-SANDVIK Data/ Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: PR with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408QM1115-SANDVIK Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 1115 Chip Breaker: QM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product specifications indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408QM235-SANDVIK Data/ Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: M235 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-M235-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408QM4335-SANDVIK Dataand Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4335 Chip Breaker: QM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-4335-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for insert WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408QM4415-SANDVIK Data/ Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: QM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060408-4415-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Design details WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408QM4425-SANDVIK Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4425 Chip Breaker: QM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-4425-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408SM1105-SANDVIK Data/ Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 1105 Chip Breaker: SM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-1105-Sandvik 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Technical data WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408-SM1205-SANDVIK Data & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 1205 Chip Breaker: -SM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-1205-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WF1115-SANDVIK Facts and Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 1115 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WF1125-SANDVIK Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 1125 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-1125-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WF1515-SANDVIK Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 1515 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-1515-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details WNMG 060408 insert from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WF1525-SANDVIK Dataand Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 1525 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-1525-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Features for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WF2015-SANDVIK Data & Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 2015 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-2015-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WF3225-SANDVIK Facts and Figures: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 3225 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060408-3225-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WF4315-SANDVIK ISO-Code: WNMG060408 Grade: 4315 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: WF Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060408-4315-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Features indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WF4415-SANDVIK Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-4415-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Performance features WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WF5015-SANDVIK ISO-Code: WNMG060408 Grade: 5015 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: WF Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-5015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WL1515-SANDVIK Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 1515 Chip Breaker: WL with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-1515-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WM4325-SANDVIK ISO-Code: WNMG060408 Grade: 4325 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060408-4325-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WM4415-SANDVIK Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: WM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WM4425-SANDVIK Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: WM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for WNMG 060408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WMX3205-SANDVIK ISO-Code: WNMG060408 Grade: 3205 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-3205-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WMX3225-SANDVIK Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 3225 Chip Breaker: WMX with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060408-3225-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Product characteristics indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WMX4315-SANDVIK Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4315 Chip Breaker: WMX with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060408-4315-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WMX4325-SANDVIK Figures for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060408-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Specifications for indexable inserts WNMG 060408 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060408WMX4405-SANDVIK Facts for the tool: ISO-Code: WNMG060408 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4405 Chip Breaker: WMX with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060408-4405-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for WNMG 060412 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412KM3210-SANDVIK Figures for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Features Material: cemented carbide Grade: 3210 Chip Breaker: KM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060412-3210-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412MM2015-SANDVIK Figures for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Features Material: cemented carbide Grade: 2015 Chip Breaker: MM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060412-2015-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Detail specifications for indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412MM2025-SANDVIK Facts for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Features Material: cemented carbide Grade: 2025 Chip Breaker: MM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060412-2025-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Performance features for indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412MR2025-SANDVIK Data/ Figures: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MR with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060412-2025-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product specifications WNMG 060412 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412MR2035-SANDVIK Facts for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 2035 Chip Breaker: MR with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060412-2035-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Specifications for indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412MR2220-SANDVIK Facts for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 2220 Chip Breaker: MR with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060412-2220-Sandvik 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Specifications for indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412MRR2015-SANDVIK ISO-Code: WNMG060412 Grade: 2015 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 1.2 Chip Breaker: MRR Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060412-2015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Information on technical features for WNMG 060412 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412PM4335-SANDVIK Facts for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060412-4335-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412PR4335-SANDVIK Facts & Figures: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Features Material: cemented carbide Grade: 4335 Chip Breaker: PR with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060412-4335-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412PR4415-SANDVIK Facts for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 4415 Chip Breaker: PR with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060412-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Information on technical features indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412QM4325-SANDVIK Facts for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060412-4325-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Technical data for WNMG 060412 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412QM4425-SANDVIK Facts for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 4425 Chip Breaker: QM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-WNMG-060412-4425-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Information on technical features WNMG 060412 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412WM3005-SANDVIK Data/ Figures: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Features Material: cemented carbide Grade: 3005 Chip Breaker: WM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060412-3005-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics WNMG 060412 insert from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412WM3210-SANDVIK Facts for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 3210 Chip Breaker: WM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060412-3210-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for WNMG 060412 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412WM4315-SANDVIK Facts and Figures: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 4315 Chip Breaker: WM with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060412-4315-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for WNMG 060412 insert from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412WM4415-SANDVIK ISO-Code: WNMG060412 Grade: 4415 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 1.2 Chip Breaker: WM Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-WNMG-060412-4415-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412WMX3210-SANDVIK Figures for the tool: ISO-Code: WNMG060412 Clearance Angle: 0° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Grade: 3210 Chip Breaker: WMX with hole Hole Style: cylindrical hole Form: trigon Chip Breaker: double-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-WNMG-060412-3210-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts WNMG 060412 from Sandvik Brand: Sandvik Manufacturer Order Number: WNMG060412WMX4325-SANDVIK ISO-Code: WNMG060412 Grade: 4325 Material: cemented carbide Form: trigon Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 1.2 Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-WNMG-060412-4325-Sandvik 40END