200g Precision Caliper Balance 0.001g Readability, Checkweighing, Stainless Steel Pan 80mm, LCD 15mm - KERN

Take advantage of OIML Class F1 accuracy and a compact 200 g nominal mass combined with a corrosion‑resistant polished stainless steel Eco‑Form to ensure reliable scale verification; order the calibration weight directly via Metav Werkzeuge or consult our specialists for technical advice. KERN 326-08 calibration weight — 200 g, OIML Class F1, polished stainless steel The KERN 326-08 is a single calibration weight for precise verification of balances and scales in laboratories and industrial workshops. OIML Class F1 accuracy Nominal mass 200 g Polished stainless steel Eco‑Form Legal accuracy that supports compliant measurement routines A calibration weight in OIML Class F1 delivers tight tolerances for routine verification and internal control checks. The certified tolerance of 1 mg ensures that balances used for quality control or internal traceability remain within legally recognised limits. By choosing an OIML‑rated standard, the metrological base for measurements is strengthened, reducing the risk of out‑of‑tolerance results and helping maintain consistent production quality. Robust materials for frequent handling and long service life Constructed from polished stainless steel in an ergonomic Eco‑Form, this single mass resists corrosion and surface wear during regular use. The compact cylindrical profile (approx. 28×47 mm) combines ease of handling with stable centre of gravity for repeatable placement on pans. These material and form choices reduce the need for frequent refurbishment while preserving the calibrated mass value over time, supporting uninterrupted verification cycles in busy environments. Simple integration into laboratory and workshop procedures The compact 200 g nominal value and standardised geometry make this weight suitable for verification of a wide range of laboratory and industrial balances. The single‑mass format is ideal for spot checks, routine internal calibration and comparison measurements. Clear identification (manufacturer KERN, SKU 326-08, GTIN 4045761223677) supports inventory control and traceability within calibration records without adding administrative complexity. Practical benefits for procurement and daily use Selecting a robust, certified calibration weight streamlines audit preparation and daily quality assurance. The Eco‑Form design facilitates safe storage and handling, while the stainless finish is easy to clean and inspect for contamination. For operations seeking dependable, low‑maintenance standards, this single weight balances metrological performance with practical usability, helping to sustain measurement confidence across the workflow. Contact Metav Werkzeuge in Emmerich for tailored advice on KERN calibration weights — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Nominal value 200 g Tolerance 1 mg OIML Class F1 Manufacturer KERN SKU 326-08 GTIN 4045761223677 Dimensions & numbers Cylinder dimensions 28×47 mm Mass 0.200 kg Harmonised system code 84239090 Country of origin DE Material & special features Polished stainless steel Eco‑Form design Single calibration weight for scale verification FAQ What level of accuracy does this calibration weight provide? The KERN 326-08 calibration weight is OIML Class F1 with a tolerance of 1 mg, suitable for precise routine verification and internal checks. Is the weight suitable for regular workshop use? Yes, the polished stainless steel construction and Eco‑Form shape make the weight durable for frequent handling in both laboratory and workshop environments. How does the 200 g nominal mass integrate with balance checks? A 200 g nominal mass is a common reference value for verifying medium‑range balances; the KERN 326-08 supports fast spot checks and traceable routine calibration. Can this weight be added to existing calibration records? Yes, the weight’s identification (KERN, SKU 326-08, GTIN 4045761223677) facilitates registration in calibration logs and inventory systems for traceability. What is the legal conformity for measurements using this weight? As an OIML Class F1 standard, this weight provides conformity suitable for internal verification and many regulatory quality procedures. KERN — Germany

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Reliable RS-232 data transfer combined with a 1.5 m cable length and a compact weight of 0.07 kg enables straightforward integration into existing workshop and laboratory setups; Order the CFS-A01 directly via Metav Werkzeuge or ask our consultants if needed CFS-A01 RS-232 interface cable by KERN — 1.5 m, lightweight A CFS-A01 RS-232 interface cable for linking precision scales and terminals to data acquisition systems, designed for reliable serial communication in industrial and workshop environments RS-232 interface for stable data transfer 1.5 m length for flexible device placement Compatible with KERN scales and terminals Lightweight 0.07 kg for easy handling Stable serial connection for precise measurement transfer The RS-232 protocol remains a standard for reliable, real-time data transmission in metrology and weighing applications. This serial lead ensures consistent data flow from measuring instruments to terminals or PCs, reducing the risk of transmission errors that can affect traceability. Built for industrial use, the cable supports common serial communication requirements and simplifies integration into existing measurement chains. The minimal signal loss and shielding typical of RS-232 connections help maintain measurement integrity during logging or process control. Flexible installation that suits bench and test environments With a 1.5 m length the lead offers practical reach between bench-top scales and nearby data collection hardware without excess cable clutter. The cable’s moderate span enables tidy routing behind workstations and straightforward placement in racks or carrying cases. Its design supports rapid reconnection and reduces setup time during shift changes or when moving devices between test stations, contributing to improved uptime and a smoother workflow in production and laboratory contexts. Compact handling and dependable supply chain quality The cable’s lightweight build (0.07 kg) makes handling and storage effortless, while still meeting the robustness expected for workshop accessories. As part of Metav’s curated offering, this accessory is supplied with a consistent quality filter from Emmerich, ensuring reliable availability for industry users. The combination of compact dimensions and dependable manufacture reduces logistical friction and supports uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge for purchasing or specialist advice on integrating the CFS-A01 into existing measurement systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CFS-A01 Manufacturer: KERN GTIN: 4045761245198 Country of origin: CN Measurements / Core data Cable length: 1.5 m Weight: 0.07 kg Special features Interface: RS-232 Category: Scales → Accessories Intended use: Connection of scales and terminals for data transfer FAQ What interface does the cable use? The CFS-A01 uses an RS-232 serial interface for stable, real-time data transfer between scales and downstream devices. What is the usable cable length? The cable provides a fixed length of 1.5 m, offering practical reach for bench and workstation arrangements. Is the cable compatible with KERN weighing instruments? Yes, the lead is specified for use with KERN scales and terminals and is intended for direct serial connections where RS-232 is supported. How heavy is the cable and how does that affect handling? Weighing 0.07 kg, the lead is lightweight and easy to route, store and reconnect without adding significant bulk to instrument setups. Can the cable be used with modern PCs without a serial port? The CFS-A01 communicates via RS-232; for PCs lacking a serial port, a USB-to-RS232 adapter can be used to bridge the connection. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of the compact Bluetooth 2.0 connection, lightweight design and fixed installation concept for reliable, error-reducing data transfer in weighing applications; order the PFB-A10 directly via Metav Werkzeuge or ask our consultants if needed. PFB-A10 Bluetooth data interface for PFB — KERN, Bluetooth 2.0 The PFB-A10 Bluetooth data interface is a compact wireless module designed to transmit weighing data from PFB scales to recording devices and PCs in workshop and industrial environments. Compact Bluetooth 2.0 interface Designed for PFB scales Lightweight: 30 g Not retrofittable Streamlined wireless data capture for precise documentation The module provides a straightforward path from weighing to digital records by enabling stable data transmission over a wireless link. The integrated Bluetooth 2.0 connection reduces manual entry and related errors, which improves traceability and saves administrative time in production and quality-control processes. For users who handle batch documentation or serial-numbered goods, the resulting consistency in measurement records supports auditability and process control without complex setup. Small footprint and practical installation benefits Weighing modules with a lightweight form factor minimise strain on mounting points and keep the overall system compact. The interface is designed specifically for integration with PFB scales and is not retrofittable, which indicates it is intended for direct factory or authorised installation to ensure correct electrical and protocol matching. This reduces the risk of compatibility problems and provides a robust connection suited to workshop and industrial conditions. Integration-ready module that supports workflow efficiency By transmitting readings wirelessly, the module speeds up data capture and reduces interruptions to production flow; this enables faster decision-making and fewer transcription errors. The interface’s simplicity helps teams who are new to digital weighing: the basic concept of a wireless serial link is explained as a way to move weight values directly to spreadsheets, databases or data-loggers without manual retyping. For configuration advice or questions about system compatibility, Metav Werkzeuge offers consultancy to support selection and commissioning. For reliable wireless weighing data with KERN devices, request the PFB-A10 via Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical advice and supply from Emmerich. Technical data Article number: PFB SKU: PFB-A10 Manufacturer: KERN GTIN: 4045761161931 Origin: CN HS code: 84239010 Facts Weight: 0.03 kg Interface type: Bluetooth 2.0 ECLASS: 19050110 Special features For PFB scales Not retrofittable FAQ What does the Bluetooth module do? The PFB-A10 transmits recorded weights from compatible PFB scales to external devices via a Bluetooth 2.0 link for digital logging and processing. Is the interface compatible with other scale series? Compatibility is defined for PFB scales; consult Metav Werkzeuge for integration options and confirmation before selecting the PFB-A10. How heavy is the unit and what does that mean for installation? The module weighs 0.03 kg (30 g), so it has a minimal physical footprint and is suited to compact installations on PFB equipment. Can the interface be retrofitted to existing scales? The device is specified as not retrofittable; the PFB-A10 is intended for direct installation where mechanical and protocol compatibility have been assured. KERN · Origin: China · GTIN: 4045761161931