Precision recycling knives for efficient material size reduction
Precision recycling knives and complementary cutting systems are engineered to deliver consistent particle size control and extended uptime in shredders and granulators, providing reliable throughput for processing plastics and other recyclables. These knives serve as wear-resistant replacements that reduce maintenance intervals and preserve cutting geometry for cleaner cuts, improving downstream separation and granulation; suitable for use in shredders, granulators and cutting mills. MetavCUT's own-brand spare and wear parts are tailored to specific machine applications to ensure fit and performance, offering a cost-effective alternative to OEM components.
40 x 20 x 1.6 x 40D Shredding/Granulator Knife, M2 1.3343 DMo5 - MetavCUT
Take advantage of a precision-engineered wear part that combines durable M2 1.3343 DMo5 tool steel, exact 40 x 20 x 1.6 x 40D dimensions and compatibility with ECON recycling systems to maintain consistent pellet quality and reduce unplanned downtime. Order the knife directly via Metav Werkzeuge or request tailored advice from our consultants. ECON04 granulation and shredding knife, M2 tool steel, 40 x 20 x 1.6 x 40D — MetavCUT The ECON04 is a granulating and shredding knife designed for ECON recycling, shredding and pelletising equipment, optimised to deliver uniform particle size and lower dust generation in plastic reprocessing applications. Precision ground M2 tool steel Dimensions 40 x 20 x 1.6 x 40D Compatible with ECON recycling machines Reduced dust and uniform pellet output Consistent pellet quality for reliable production Precision manufacturing of the blade geometry delivers uniform pellets and a stable production process. Manufactured from M2 1.3343 DMo5, the knife retains a sharp cutting edge under continuous load, which results in fewer fines and more consistent downstream processing. For operators, this means less screen clogging and a lower reject rate; for procurement, it translates into predictable output and reduced waste disposal costs. The cutting behaviour is tuned for common recycling tasks including films, pipes and sprues, ensuring that the processed material meets the requirements for further extrusion or regranulation. Durable tool steel that extends service intervals The choice of M2 1.3343 DMo5 high-speed tool steel provides a balance between edge retention and toughness that is suitable for abrasive and contaminated plastics streams. Heat-treatment and grinding yield a wear-resistant surface that delays the drop in cutting performance and extends intervals between resharpening or replacement. As a result, maintenance cycles are lengthened and machine uptime is improved. The material properties also reduce the frequency of emergency stoppages caused by blunt tools, supporting continuous operation in high-throughput recycling lines. Exact fit for ECON systems and straightforward integration Designed specifically for ECON machines, the knife’s 40 x 20 x 1.6 x 40D specification ensures a precise fit and repeatable alignment in the knife carrier. A precise match reduces vibration and promotes even blade wear, which in turn protects the rotor and feed components from uneven loading. Because the geometry is engineered to the original tool envelope, installation is straightforward and does not require modifications to the holder. This compatibility supports a rapid return to production after replacement, maintaining processing stability on shredders, granulators and pelletisers. Fewer process issues and easier material handling Sharp, accurately ground cutting edges reduce the generation of fine particles and dust, improving material handling and the quality of the regranulate. Lower dust levels also ease filtration requirements and minimise housekeeping effort around the machine. The combination of good edge stability and correct cutting geometry supports a cleaner cut, producing strands and chips that are easier to dry and convey, thereby streamlining subsequent processing steps and improving overall throughput. Practical lifecycle and value for procurement As a process-optimised wear part from MetavCUT, the knife offers an economical alternative to original manufacturer components while retaining the core functional characteristics required for industrial recycling. The focus on durable steel and consistent geometry reduces total cost of ownership by extending service life and cutting maintenance hours. Decision-makers benefit from predictable performance and simplified stock management when selecting a standardised replacement blade for ECON equipment. Contact Metav Werkzeuge for a tailored quotation or compatibility check based on machine type and processing material — Metav Werkzeuge provides fast, expert support from Emmerich to keep production running smoothly Technical Data Article number: ECON-ECON04-40x20x1.6x40D-M2-13343-DMo5 Designation: ECON04 Brand: MetavCUT Facts Dimensions: 40 x 20 x 1.6 x 40D Special features Material: M2 1.3343 DMo5 Application: granulation and shredding in recycling and pelletising systems Suitable for: recycling plants, shredding systems and pelletising equipment of the ECON manufacturer FAQ What materials can this knife process effectively? The ECON04 granulation and shredding knife, manufactured in M2 1.3343 DMo5 by MetavCUT, is intended for a broad range of plastic waste such as films, pipes and sprues where reliable cutting and uniform pellet formation are required. How does the ECON04 affect pellet quality and dust levels? A precisely ground geometry and wear-resistant M2 steel minimise fines and dust, producing more uniform pellets and improving downstream handling compared with blunt or ill-fitting blades. Is the knife a direct replacement for original ECON parts? The knife is specified for use in ECON recycling and pelletising machines and is supplied to match the required 40 x 20 x 1.6 x 40D envelope for straightforward installation and alignment. How often will the blade need replacement or resharpening? Service intervals depend on feed material and contamination; the ECON04’s durable M2 1.3343 DMo5 composition is selected to extend edge life and reduce unplanned replacements in typical recycling workloads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We provide an economical alternative to original manufacturer parts with our MetavCUT brand: our process-optimised wear parts are precisely matched, long-lasting and specifically developed for productive use.
40 x 20 x 1.65 x 35D Granulator Knife, M2 1.3343 DMo5 - MetavCUT
Take advantage of robust M2 (1.3343 DMo5) tool steel, precision-ground geometry and compatibility with ECON granulators to maintain consistent pellet quality and low downtime. Order the ECON04 granulator and shredder blade directly via Metav Werkzeuge or ask our consultants if needed. ECON04 Granulator and Shredder Knife — 40 x 20 x 1.65 x 35D, M2 (1.3343 DMo5) — MetavCUT A ECON04 granulator and crusher blade for ECON recycling machinery, engineered to deliver uniform cutting performance in shredders and pelletising systems. M2 tool steel (1.3343 DMo5) for long wear Precision ground 40 x 20 x 1.65 x 35D profile Designed for ECON granulators and shredders Consistent output and improved process efficiency High-process environments demand consistent particle size and reliable throughput. The blade’s M2 tool steel composition combines hardness with toughness to preserve a sharp cutting edge, which results in more uniform pellets and reduced regrind. Fewer fines and lower dust levels contribute to cleaner downstream processing and less load on filtration and conveying systems. By prioritising repeatable geometry, the component supports stable production rates and helps keep cycle times predictable. Durable construction that reduces maintenance intervals Built from grade 1.3343 (DMo5) high-speed steel, the cutting element resists abrasive wear while tolerating the mechanical stresses common in recycling applications. Precision grinding of the profile ensures an even contact line during cutting, reducing localised wear and the need for frequent reshaping. These material and manufacturing choices translate into longer service intervals, fewer planned stops and lower total cost of ownership for the system operator. Purpose-designed for compatibility and simple replacement The knife is supplied in the exact 40 x 20 x 1.65 x 35D configuration specified for many ECON systems, allowing for straightforward interchange during maintenance. The geometry is optimised for both shredding of bulky scrap and granulation of extruded strands, so a single blade design serves multiple machine stages. Clear, standardised dimensions simplify inventory management and enable reliable fitment without trial adjustments. For supply, technical matching or tailored advice on MetavCUT wear parts, contact Metav Werkzeuge for expert guidance and fast delivery from Emmerich. Technical data Article number: ECON-ECON04-40x20x1.65x35D-M2-13343-DMo5 Product name: Granulator and shredder knife ECON04 Brand: MetavCUT Core specifications Dimensions: 40 x 20 x 1.65 x 35D Material grade: M2 (1.3343 DMo5) Features & application Intended for shredders, granulators and pelletising systems Compatible with ECON recycling and granulation machines Precision-ground cutting geometry for consistent pellet quality Wear-resistant high-speed steel for extended service life FAQ What materials can this blade process effectively? The ECON04 blade, made from M2 (1.3343 DMo5), is designed to process typical recycling materials in shredders and granulators, delivering consistent cutting performance for plastics, films and common thermoplastic scrap. How does the material grade affect blade life? Using high-speed steel like M2 improves wear resistance and retains a sharper edge under heavy load; this means the ECON04 granulator knife achieves longer service intervals compared with softer steels. Is the blade a direct replacement for ECON machines? Yes, the ECON04 blade is manufactured to the specified 40 x 20 x 1.65 x 35D profile and is intended for direct fitment in compatible ECON shredders and granulators. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten dir mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
40 x 20 x 1.65 x 35D Granulator/Shredder Knife, 1.3207 EW9Co10 Wear-Resistant - MetavCUT
Benefit from durable, wear-resistant cutting edges, precise dimensions and a design matched to ECON recycling systems for consistent pellet quality and longer production runs. Order supply directly via Metav Werkzeuge or request tailored advice from our consultants. ECON04 granulator knife (MetavCUT) – 1.3207 EW9Co10, 40 x 20 x 1.65 x 35D ECON04 is a replacement granulator and shredder blade designed for reliable reduction of plastic waste and regranulation in ECON recycling equipment. Wear-resistant EW9Co10 steel Precise 40 x 20 x 1.65 profile Designed for ECON recycling systems Sharp edge for consistent pellet quality Consistent cutting quality for continuous operation The ECON04 is engineered to maintain a sharp edge under continuous load, giving a uniform cut that supports steady downstream processing. Made to the quoted dimensions, the blade’s exact profile reduces vibration and irregular wear in granulators and shredders, which in turn lowers the risk of unexpected stoppages. The combination of precise geometry and robust material selection contributes to reliable production flow and helps sustain throughput targets in high-demand recycling lines. Faster maintenance cycles through precise fit A close-fitting knife reduces set-up time and simplifies replacement in routine maintenance windows. The specified dimensions ensure a precise fit in ECON machines, which minimises mechanical play and the need for repeated adjustments. When blades sit cleanly in their carriers, strain on bearings and shafts is reduced, delivering a measurable effect on service intervals and spare-part logistics. This design focus translates into less downtime and more predictable maintenance planning. Adapted for a wide range of plastic processing tasks Granulating and shredding tasks such as cutting film, sprues, tubes, sheets or bulky waste demand consistent results to avoid quality loss in regrind. The knife’s geometry supports even particle size, which improves melt behaviour and screening efficiency in subsequent processing stages. By reducing fines and dust generation, the blade helps maintain a cleaner working environment and stabilises material handling, benefiting both product quality and operator comfort in recycling operations. Material designation and role in wear performance The blade is supplied in the specified grade 1.3207 EW9Co10, a tool-steel designation used for wear-critical cutting components. This material choice is intended to balance edge retention with toughness for cyclic loads encountered in granulators and shredders. Correct selection and mounting of the knife are central to achieving the anticipated service life; regular inspection and professional reconditioning keep cutting performance consistent and limit scrap rates. For durable performance in recycling lines, choose the MetavCUT ECON04 with 1.3207 EW9Co10 and contact Metav Werkzeuge for tailored supply and technical advice by phone or email Technical Data Article number: ECON-ECON04-40x20x1.65x35D-13207-EW9Co10 Product name: Zerkleinerungsmesser / Granuliermesser 40 x 20 x 1.65 x 35D ECON04 für ECON Maschinen aus 1,3207 EW9Co10 Brand: MetavCUT Facts Dimensions: 40 x 20 x 1.65 x 35D Special features Material: 1.3207 EW9Co10 Application: recycling, shredding, granulation Suitable for ECON recycling, shredders and pelletiser systems FAQ What machines is this blade compatible with? The ECON04 granulator knife is specified for use in ECON recycling, shredding and pelletising systems and fits the original mounting profile for those machines. How does the material 1.3207 EW9Co10 affect service life? The designation 1.3207 EW9Co10 identifies the tool steel chosen for wear-critical cutting parts; in the ECON04 it supports sustained edge retention under typical granulator loads. Can this blade improve pellet consistency? Yes, the ECON04’s precise geometry and sharp cutting edge promote uniform particle size, which helps achieve more consistent pellets and smoother downstream extrusion or compounding. What items are typically processed with this knife? The knife is intended for processing plastic waste such as film, sprues, tubes, plates and other common feedstock in recycling and granulation lines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten dir mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
40 x 20 x 2.8 x 35D Granulator/Chipper Knife, High-Speed Steel EW9Co10, For ECON Machines - MetavCUT
Take advantage of the wear-resistant 1.3207 EW9Co10 alloy and the precise 40 x 20 x 2.8 x 35D geometry to maintain steady granulate quality and reduce downtime; order the blade directly via Metav Werkzeuge or consult their specialists for supply and technical advice. ECON03 Granulator and Shredder Knife – 1.3207 EW9Co10, 40 x 20 x 2.8 x 35D (MetavCUT) ECON03 is a granulator and shredding blade engineered for ECON recycling equipment, designed to produce uniform pellets and reliable throughput in continuous operation Wear-resistant 1.3207 EW9Co10 steel Precise 40 x 20 x 2.8 x 35D dimensions Direct fit for ECON recycling machines Sharp cutting edge for consistent pellets Reliable cutting performance that prolongs run times Manufactured from 1.3207 EW9Co10, a cobalt-enriched tool steel, this granulator blade delivers high wear resistance and sustained edge retention under abrasive conditions. The material choice reduces frequency of blade changes in heavy-duty recycling, which directly supports higher machine availability. In shredders and granulators that process films, pipes or sprues, the result is a consistent material flow and lower fines generation, improving downstream handling and reducing rework. Exact dimensions and fit that reduce setup time The 40 x 20 x 2.8 x 35D specification ensures an accurate mechanical match with ECON machines, enabling straightforward installation and precise blade seating. A correct fit minimises vibration and uneven loads, which preserves bearing life and lowers the risk of imbalance-related faults. This dimensional stability translates into predictable maintenance cycles and faster changeovers, so operational planning becomes more reliable and less labour-intensive. Consistent pellet quality for efficient reprocessing A sharp, precision-ground cutting geometry supports uniform granulate size and reduces dust formation during size reduction, which benefits both product quality and environmental hygiene in the plant. Consistent particle shape simplifies downstream extrusion and regranulation steps, contributing to measurable operational efficiency and material yield improvements. By using a purpose-made replacement blade, process stability is preserved and the overall cost of production per kilo of recycled material is optimised. For durable, process-optimised wear parts from MetavCUT, contact Metav Werkzeuge in Emmerich for tailored supply and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ECON-ECON03-40x20x2.8x35D-13207-EW9Co10 Name: Zerkleinerungsmesser / Granuliermesser 40 x 20 x 2.8 x 35D ECON03 Facts Material: 1.3207 EW9Co10 Dimensions: 40 x 20 x 2.8 x 35D SKU: ECON-ECON03-40x20x2.8x35D-13207-EW9Co10 Special features Suitable for ECON recycling, shredding and pelletising equipment Brand: MetavCUT Part designation: ECON03 FAQ What applications is this blade designed for? This granulator and shredder knife is intended for use in recycling lines and pelletising systems; the ECON03 from MetavCUT is suitable for processing plastic waste, sprues, films, pipes and plates in ECON machines. How does the material 1.3207 EW9Co10 benefit performance? The 1.3207 EW9Co10 alloy provides enhanced wear resistance and edge stability, so the ECON03 maintains cutting performance longer and supports reduced changeover frequency. Is the ECON03 compatible with all ECON machines? The knife is manufactured to the 40 x 20 x 2.8 x 35D specification for direct fit in designated ECON shredders and granulators; compatibility depends on matching the machine’s blade holder dimensions. What operational advantages can be expected after replacement? Fitting a correctly specified replacement blade improves pellet uniformity and reduces dust, which in turn lowers downstream processing effort and helps to maintain steady throughput. How does blade precision affect equipment life? A precise blade seating reduces imbalance and vibration, which protects bearings and other drivetrain components; the ECON03’s dimensional accuracy supports longer service intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer with our MetavCUT brand an economical alternative to original manufacturer parts: our process‑optimised wear parts are precisely fitting, durable and developed specifically for productive industrial use.
40 x 20 x 2.8 x 35D Granulator/Size-Reduction Knife, M2 (1.3343 DMo5) - MetavCUT
Reliable cutting performance and long service life from M2 high-speed steel, combined with precise dimensions for direct fit on ECON machines. Order the ECON03 directly via Metav Werkzeuge or ask our consultants if needed. ECON03 granulator and shredding knife — M2 high-speed steel, 40 x 20 x 2.8 x 35D The ECON03 is a granulator and shredding knife designed for ECON recycling and pelletising machines, engineered to deliver consistent cutting performance for a wide range of plastic waste and reprocessing tasks. M2 (1.3343 DMo5) high-speed steel construction Precision ground edges for consistent pellet size Compatible with ECON recycling and granulators Low dust generation and improved throughput Consistent pellet quality through optimised cutting geometry The ECON03 is manufactured from M2 high-speed steel (1.3343 DMo5), a material chosen for its balance of hardness and toughness. This composition supports stable cutting edges that preserve geometry under cyclic loads, resulting in consistent pellet size and fewer fines. For recycling and granulating processes, this translates into more uniform regranulate, reduced downstream filtration effort and improved process stability. The knife’s ground profile is designed to reduce friction and control chip formation, which helps maintain throughput without sacrificing cut quality. Reduced downtime and longer maintenance intervals Precision finishing and the inherent wear resistance of the steel minimise rapid edge degradation, allowing longer service intervals and fewer unscheduled stops. The accurate manufacturing tolerances ensure a secure fit in the knife holder, which reduces vibration and wear on adjacent components. Lower dust generation means less load on extraction and screening systems, contributing to a cleaner production environment and reduced maintenance on ancillary equipment. Taken together, these factors improve overall equipment effectiveness and support a more predictable maintenance schedule. Direct fit for ECON systems and reliable supply chain backing With dimensions 40 x 20 x 2.8 x 35D, the knife is configured for direct replacement in compatible ECON shredders, granulators and pelletisers, providing a straightforward swap without custom machining. The design focus on repeatable geometry ensures even contact pressure across the blade, preserving both cut quality and machine life. Metav’s quality filter in Emmerich underpins product reliability for industrial applications, combining workshop practicality with industrial supply security — an economical wear-part solution developed for continuous production. Our MetavCUT range offers a targeted alternative to original parts while maintaining fit and function. Contact Metav Werkzeuge for MetavCUT ECON03 replacements and ensure uninterrupted production—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ECON-ECON03-40x20x2.8x35D-M2-13343-DMo5 Item name: Zerkleinerungsmesser / Granuliermesser ECON03 Material: M2 1.3343 DMo5 Brand: MetavCUT Facts Dimensions: 40 x 20 x 2.8 x 35D UID: ECON-ECON03-40x20x2.8x35D-M2-13343-DMo5 Special features Suitable for ECON recycling and pelletising machines Application: shredding and granulating plastics Precision ground cutting edges Designed as a wear part for productive operation FAQ What material is used for this knife and why is it suitable? The ECON03 is made from M2 high-speed steel (1.3343 DMo5), chosen for a balance of hardness and toughness that preserves cutting geometry under continuous use and supports consistent pellet quality. Which machines is this knife compatible with? This granulator and shredding knife is compatible with ECON recycling, shredding and pelletising machines and is supplied in a standard format for direct replacement. What are the exact dimensions and how do they affect fit? Dimensions are 40 x 20 x 2.8 x 35D; these measurements ensure accurate seating in the knife holder and maintain correct clearance for stable cutting and minimal vibration. How does this knife influence dust generation and downstream processing? The precision-ground edges of the ECON03 produce fewer fines, reducing dust generation and easing the load on extraction and screening systems, which benefits downstream processing and filtration. Is the MetavCUT knife a direct alternative to original equipment parts? MetavCUT knives like the ECON03 are engineered as economical, process-optimised wear parts that match form, fit and function for productive use while offering a cost-efficient alternative to some manufacturer-original components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 1.6 x 40D Granulator/Chipper Knife M2 1.3343 DMo5 - MetavCUT
Take advantage of precise M2 (1.3343 / DMo5) high‑speed steel, exact 40 x 25 x 1.6 x 40D dimensions and a design optimised for continuous operation to keep production steady and pellet quality consistent. Order replacements or discuss suitability directly with Metav Werkzeuge for a reliable supply chain solution. Shredder and granulator cutter 40 x 25 x 1.6 x 40D — MetavCUT M2 HSS blade The shredder and granulator cutter 40 x 25 x 1.6 x 40D is a replacement cutting blade designed for ECON recycling and granulating equipment, providing a precision fit and durable cutting performance in industrial recycling applications. M2 high‑speed steel construction Exact 40 x 25 x 1.6 x 40D dimensions Sharp edge for uniform pellets Compatible with ECON recycling machinery Consistent pellet quality through precision materials Made from M2 (1.3343 / DMo5) high‑speed steel, this cutter combines hardness and toughness to deliver a consistently sharp cutting edge. The material selection reduces micro‑fracture and wear during high‑speed cutting, which in turn supports uniform pellet sizes and reduced dust generation. For operators of granulators and shredders, this translates into fewer rejects and less downstream screening, improving overall process efficiency. Exact dimensions for fast installation and reliable running The specified 40 x 25 x 1.6 x 40D geometry ensures a precise mechanical fit in compatible ECON machines, eliminating the need for on‑site modification. A correct fit maintains blade alignment and cutting geometry, which helps keep the rotor balance and reduces vibration. Faster changeovers and consistent alignment directly support higher machine availability and predictable maintenance intervals. Designed for demanding recycling workflows Blades used in shredders and granulators face a mix of materials and operating stresses; this cutter is engineered for that environment. Its geometry and edge preparation are aimed at processing plastics, film remnants and sprues with minimal smearing and clogging. The result is steady throughput and a clean cut surface that eases downstream handling and reduces energy consumption per tonne processed. Serviceable design that supports cost efficiency The hardness and grindability of M2 allow for multiple re‑sharpening cycles where appropriate, extending the useful life compared with coated low‑grade steels. By enabling controlled reconditioning, the cutter offers a cost‑effective balance between initial blade performance and long‑term tool economy. For budget‑conscious operations, this combination of performance and serviceability lowers total cost of ownership across production runs. Application focus and operational benefits Intended for use in ECON recycling, shredding and pelletising systems, the blade contributes directly to product consistency and plant reliability. Sharp, correctly dimensioned knives improve cut geometry, reduce fines and help maintain melt quality in granulation lines. Choosing a blade with industrial specification promotes safer operation and predictable maintenance planning, aligning with lean production goals. Contact Metav Werkzeuge for a tailored replacement blade and technical guidance for ECON machines; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility, delivery and reconditioning options Technical data Article number: ECON--40x25x1.6x40D-M2-13343-DMo5 Description: Shredder and granulator cutter 40 x 25 x 1.6 x 40D for ECON machines Material: M2 (1.3343 / DMo5) high‑speed steel Manufacturer: MetavCUT Facts Dimensions: 40 x 25 x 1.6 x 40D Special features Application: Recycling, shredding and granulating of plastics Compatibility: Designed for ECON recycling and pelletising equipment Wear characteristics: Hardened high‑speed steel for extended service life FAQ What materials is this cutter intended for? The cutter is specified for use in recycling and granulating workflows processing various plastics; the MetavCUT shredder and granulator cutter (SKU ECON--40x25x1.6x40D-M2-13343-DMo5) is engineered to handle film, sprues and general plastic offcuts. Is this blade compatible with all ECON machines? Compatibility is intended for ECON recycling and granulating machines that accept the 40 x 25 x 1.6 x 40D geometry; confirm machine specifications before installation. Can the blade be re‑sharpened? Yes. The M2 (1.3343 / DMo5) high‑speed steel composition permits controlled re‑sharpening to extend blade life while maintaining cutting performance. How does the blade affect pellet quality? A sharp, precisely ground edge contributes to uniform pellet dimensions and reduced dust, improving downstream processing and product consistency. Which part identifier should be used when ordering replacements? Use the SKU ECON--40x25x1.6x40D-M2-13343-DMo5 and specify MetavCUT as the brand to ensure the correct replacement item is supplied. Manufacturer / Responsible: MetavCUT / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller‑Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz ausgelegt.
40 x 25 x 1.6 x 40D Granulator/Shredder Knife, 1.3207 EW9Co10 - MetavCUT
Taking advantage of wear-resistant 1.3207 EW9Co10 and an exact 40 x 25 x 1.6 x 40D profile, this blade delivers consistent particle size and reduced dust generation for continuous operation; order MetavCUT replacement knives via Metav Werkzeuge or consult the technical team for machine-specific advice. Shredder/Granulator Blade 40 x 25 x 1.6 x 40D – 1.3207 EW9Co10 (for ECON machines) by MetavCUT A Shredder/Granulator Blade 40 x 25 x 1.6 x 40D engineered to reduce plastics to processable sizes in ECON recycling and pelletising equipment *Made from 1.3207 EW9Co10 wear-resistant steel *Dimensions 40 x 25 x 1.6 x 40D for direct fit *Designed for shredders and granulators *Precision fit for ECON recycling systems High-performance wear characteristics prolong run times Manufactured from 1.3207 EW9Co10, this blade offers a balance of toughness and abrasion resistance that supports longer intervals between replacements. In continuous recycling lines, reduced wear translates into fewer stoppages and steadier production rates. The material choice contributes to predictable service life and consistent cutting behaviour, which in turn helps maintain throughput and lowers total lifecycle intervention. Exact fit reduces setup time and mechanical stress The 40 x 25 x 1.6 x 40D profile is produced to match ECON equipment tolerances, ensuring a precision fit that minimises play and vibration during operation. Reduced mechanical stress on the knife holder and rotor increases the reliability of the entire cutting assembly. A close-fitting blade also supports uniform contact across the cutting edge, improving cut quality and reducing the risk of premature component failure. Improved product quality through controlled cutting Sharp, well-matched knives deliver a consistent particle size, which eases downstream handling and reprocessing. The blade geometry and hard-wearing steel help to limit fines and dust generation, resulting in cleaner material streams and less loss of material value. These effects are particularly relevant in shredders and granulators where downstream filters and conveyors benefit from a more uniform feed. Application focus and operational advantages in recycling lines Intended for use in shredders, cutting mills and granulators on ECON machines, the blade supports both primary size reduction and post-extrusion pelletising tasks. Its design emphasises stable, repeatable cuts under industrial loads, enabling steady plant performance. Where frequent changeovers are required, the compatibility and predictable behaviour of this component simplify inventory planning and maintenance scheduling. Contact Metav Werkzeuge for tailored specification support and to secure MetavCUT replacement blades matched to ECON machines; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ECON--40x25x1.6x40D-13207-EW9Co10 Article designation: Zerkleinerungsmesser / Granuliermesser 40 x 25 x 1.6 x 40D für ECON Maschinen aus 1,3207 EW9Co10 Manufacturer: MetavCUT Material: 1.3207 EW9Co10 Dimensions: 40 x 25 x 1.6 x 40D Facts Dimensions: 40 x 25 x 1.6 x 40D Material grade: 1.3207 EW9Co10 SKU: ECON--40x25x1.6x40D-13207-EW9Co10 Special features Suitable for ECON recycling, shredding or pelletising systems Intended for shredders, cutting mills and granulators Designed to deliver consistent particle size and low dust Process-optimised wear part for industrial recycling applications FAQ What materials can this blade process? The blade is specified for general recycling use in shredders and granulators; the MetavCUT shredder/granulator blade (ECON--40x25x1.6x40D-13207-EW9Co10) is used primarily on plastic waste, sprues, films and similar polymeric feedstocks in ECON equipment. How does the material 1.3207 EW9Co10 benefit cutting performance? The 1.3207 EW9Co10 steel offers a combination of abrasion resistance and toughness that keeps the cutting edge functional for longer periods, so the MetavCUT blade maintains cutting quality under continuous industrial operation. Is this blade a direct replacement for ECON originals? The item is dimensioned for direct fit in ECON shredders and granulators; its 40 x 25 x 1.6 x 40D profile is intended to match the corresponding machine holders and mounting geometry. What operational improvements can be expected after installation? Installation of a correctly matched blade reduces vibration and uneven wear, promoting consistent particle size, less dust and more reliable plant throughput when used in the appropriate ECON system. Can the blade be resharpened or must it be replaced? Resharpening depends on wear pattern and service economics; the MetavCUT blade is produced as a process‑optimised wear part, and replacement is often the most efficient option in high‑throughput recycling operations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to original manufacturer parts with our MetavCUT brand: our process‑optimised wear parts are precisely matched, durable and specifically developed for productive use.
40 x 25 x 1.65 x 35D Granulator/Shredder Knife, EW9Co10 High-Alloy Steel - MetavCUT
Take advantage of a wear-resistant design and precise dimensions to secure consistent cutting performance and reliable pellet quality; the combination of 1.3207 EW9Co10 steel and the 40 x 25 x 1.65 x 35D profile supports stable operation in ECON systems. Order supply or consult Metav Werkzeuge for application advice and supply chain continuity. MetavCUT Shredding / Pelletising Knife 40 x 25 x 1.65 x 35D – 1.3207 EW9Co10 The MetavCUT Shredding / Pelletising Knife 40 x 25 x 1.65 x 35D is a wear part engineered for recycling and granulation duties in ECON recycling, shredding and pelletising machines. Precision-ground 1.3207 EW9Co10 material Compatible with ECON recycling systems Optimised for low dust and uniform pellets Consistent cut quality that improves downstream processing The blade profile 40 x 25 x 1.65 x 35D and the chosen 1.3207 EW9Co10 material deliver a defined cutting edge that promotes uniform pellets and reduced fines during granulation. In shredding and pelletising applications, a consistent edge geometry lowers the proportion of dust and fines, which in turn reduces the need for additional sieving or rework. This translates into more predictable throughput and a steadier end-product quality for recycling or regranulate production. Built for reliable integration with ECON equipment Designed specifically for use in ECON machines, the knife matches the typical holder geometries and mounting requirements used across shredders and granulators from this manufacturer. The compatibility focus reduces installation time and simplifies spare-part logistics. By aligning blade geometry with machine tolerances, operational stability is improved and the risk of uneven wear or premature edge failure is minimised, supporting continuous production cycles. Material choice and wear behaviour explained Manufactured from 1.3207 EW9Co10, the component is specified as a wear part for abrasive and repetitive cutting tasks commonly encountered in recycling plants. The steel grade provides the hardness and toughness balance needed to withstand contact with varied plastic scrap such as sprues, films, pipes and plates. Because the material selection targets durability, the blade sustains cutting performance over longer service intervals while maintaining a predictable wear pattern that facilitates planned maintenance. Practical benefits: maintenance, process efficiency and uptime Using a process-optimised knife reduces unplanned stops and eases maintenance planning. The precise edge geometry contributes to steady feed behaviour and lowers mechanical stress on the granulator shaft and counter-rotating knives. Fewer fines and more regular pellet size improve downstream handling and extrusion efficiency, which can cut reprocessing steps and conserve energy. As a replaceable wear item, the blade supports quick changeovers and keeps overall production interruptions to a minimum. For process-stable granulation with MetavCUT precision, contact Metav Werkzeuge for tailored advice and supply from Emmerich: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ECON--40x25x1.65x35D-13207-EW9Co10 Article name: Zerkleinerungsmesser / Granuliermesser 40 x 25 x 1.65 x 35D for ECON machines made from 1.3207 EW9Co10 Manufacturer: MetavCUT Facts Dimensions: 40 x 25 x 1.65 x 35D Material grade: 1.3207 EW9Co10 UID: ECON--40x25x1.65x35D-13207-EW9Co10 Special features Application: shredders, granulators and pelletisers Compatible with ECON recycling, shredding and pelletising machines Purpose: reduce plastic waste to processable size and produce uniform pellets Intended as a replaceable wear part in industrial recycling lines FAQ Which machines is this knife compatible with? The blade is specified for use in ECON recycling, shredding and pelletising machines and is designed to match common holder geometries used by that manufacturer. What material is the knife made from and why? The knife is manufactured from 1.3207 EW9Co10, selected to provide the balance of wear resistance and toughness required for repeated cutting of plastic scrap. Which types of plastic can be processed with this blade? The knife is suitable for a wide range of plastic waste such as sprues, films, pipes and plates, supporting both shredding and subsequent granulation tasks. How does the blade influence pellet quality and dust generation? A precise edge and correct profile help produce uniform pellets and reduce fines, which decreases dust generation and improves downstream handling and extrusion performance. Is this a direct replacement part for ECON granulators? The component has been produced to fit ECON systems; compatibility with specific models should be checked against machine holder details and the listed profile dimensions. Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer with our MetavCUT brand a cost-effective alternative to original manufacturer parts: our process-optimised wear parts are precisely matched, long-lasting and developed for productive industrial use.
40 x 25 x 1.65 x 35D Shredder/Granulator Knife M2 (1.3343 / DMo5) - MetavCUT
Benefitting from durable M2 (1.3343 / DMo5) high‑speed steel, exact 40 x 25 x 1.65 x 35D dimensions and direct compatibility with ECON recycling equipment, this blade delivers consistent cutting performance and longer service intervals. Order the blade directly via Metav Werkzeuge or ask our consultants if needed. Shredder / Granulator Blade 40 x 25 x 1.65 x 35D (M2 1.3343 DMo5) by MetavCUT A robust Shredder and Granulator Blade designed for ECON recycling and granulation machines, providing precise cutting geometry and extended wear life for continuous industrial processing. Solid M2 high‑speed steel construction Exact 40 x 25 x 1.65 x 35D dimensions Compatible with ECON recycling machines High wear resistance for continuous operation Engineered for consistent, clean cuts The blade is manufactured from M2 (1.3343, DMo5), a high‑speed steel grade chosen for its balance of hardness and toughness. This material selection yields a sharp edge that is retained under cyclic loads, resulting in consistent pellet size or shred quality and reduced rework. By focusing on cutting geometry and edge preparation, the component minimises jagged breaks and uneven fragments, which in turn lowers downstream screening effort and improves secondary processing efficiency. Precision fit that reduces machine downtime With exact 40 x 25 x 1.65 x 35D dimensions, the cutting part is produced to tight tolerances so that replacement is straightforward and repeatable. A precise fit to ECON machines ensures alignment of the cutting gap and blade seating, which reduces vibration and uneven wear. The result is faster service routines, fewer alignment adjustments and less unplanned stoppage — clear operational advantages for continuous recycling lines and pelletising processes. Material and wear characteristics that extend service intervals The choice of M2 HSS, combined with heat treatment and surface finishing, is aimed at abrasion resistance and edge stability during high‑throughput operation. Such properties enable the blade to handle a range of feedstocks — from films and sprues to thicker pipes and plates — without rapid blunting. Reduced wear rate means fewer blade changes and lower inventory turnover for wear parts, supporting a predictable maintenance schedule and steady production output. Suited applications and process benefits Designed for use in shredders, cutting mills and granulators, this blade performs where consistent size reduction is required prior to extrusion or recycling. In granulation tasks the geometry supports clean strand cutting for uniform pellet formation, while in shredding applications the component helps limit dust generation and fines. As a process‑optimised wear part, it contributes to improved product quality, lower waste rates and reliable machine availability on busy shop floors. For process‑optimised wear parts from MetavCUT and advice on integrating this blade into ECON equipment, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery options Technical data SKU: ECON--40x25x1.65x35D-M2-13343-DMo5 Material: M2 1.3343 DMo5 Dimensions: 40 x 25 x 1.65 x 35D Brand: MetavCUT Suitable for: Recycling, shredding and pelletising equipment from ECON Facts Dimension specification: 40 x 25 x 1.65 x 35D Steel grade: M2 (1.3343 / DMo5) Special features Compatibility with ECON recycling and granulator machines Application: shredders, cutting mills, granulators Process‑optimised wear part for industrial use Designed for reduced dust and consistent pellet output FAQ What material is the blade made from and why is it used? The blade is produced from M2 (1.3343, DMo5) high‑speed steel; this grade provides a durable cutting edge and wear resistance suited to repeated size reduction in recycling and granulation. Is this blade compatible with ECON machines? Yes, the blade is specified for use in ECON recycling, shredding and pelletising equipment and is produced to match the required seating and cutting gap dimensions. How do the dimensions affect performance? Exact dimensions (40 x 25 x 1.65 x 35D) ensure correct blade alignment and cutting geometry, which reduces vibration, improves cut quality and extends service intervals for the machine. Can this blade handle different types of plastic feedstock? The blade’s material and geometry are suited to a wide range of plastics including films, sprues and thicker sections, enabling reliable shredding or granulation with reduced fines. Is the blade supplied ready for installation or does it require further machining? The component is delivered machined to the specified tolerances and prepared for installation in compatible ECON equipment; final installation checks should follow machine manufacturer guidelines. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com With the MetavCUT brand, a cost‑effective alternative to original manufacturer parts is offered: process‑optimised wear parts that are precisely fitting, long‑lasting and expressly developed for productive industrial use.
40 x 25 x 1.65 x 35D Shredder/Granulator Knife M35 HSS-Co, For Recycling Machines - MetavCUT
Take advantage of a wear-resistant M35 HSS‑Co cutting geometry and precise 40 x 25 x 1.65 x 35D sizing for reliable performance in recycling lines; the result is consistent pellet quality and reduced machine downtime. Order replacement knives via Metav Werkzeuge for assured delivery and technical advice, or consult our specialists for installation and compatibility guidance. MetavCUT Granulator Knife 40 x 25 x 1.65 x 35D (M35 HSS‑Co) – Granulator / Shredder Blade The MetavCUT Granulator Knife 40 x 25 x 1.65 x 35D is a precision replacement blade designed for ECON granulators and shredders, optimised for industrial recycling and pelletising of plastic waste. M35 HSS‑Co high wear resistance Precisely ground cutting edge Compatible with ECON machines Consistent pellets with reduced dust Robust material for continuous production gains Made from M35 HSS‑Co, this blade delivers high wear resistance and a predictable tool life in abrasive recycling environments. The alloyed high-speed steel contains cobalt to retain hardness at elevated temperatures, which helps to maintain a sharp cutting edge under prolonged load. The material choice translates into fewer changeovers and less unscheduled downtime, improving the productivity of shredders and granulators in continuous operation. Precise geometry for uniform regranulate The specified dimensions 40 x 25 x 1.65 x 35D and factory-ground tolerances ensure an accurate fit and consistent clearance when mounted in ECON machines. A stable geometry promotes even shearing of film, pipes, sprues and plates, producing consistent pellets and reducing fines and dust. Lower dust generation benefits downstream filtration and reduces material loss, contributing to better yield and easier handling of reprocessed material. Application-focused design that reduces total cost of ownership These knives are engineered for use in shredders, cutting mills and extrusion granulators where a reliable cutting performance is essential. The combination of a hard-wearing substrate and precise edge preparation improves cut quality and reduces the frequency of regrinds. In practice, this leads to a lower total cost of ownership through extended service intervals and fewer production interruptions, while maintaining the quality required for regranulate resale or reuse. Installation, maintenance and compatibility notes The blade is supplied to match the ECON mounting pattern and nominal thickness for immediate interchangeability. Correct installation and torque settings are important to preserve blade life and machine safety; protective covers and secure fastenings are recommended. When integrated into a granulation line, a properly aligned knife set contributes to even strand cutting and homogenous pellet size, which simplifies downstream sieving and drying operations. Mit unserer Marke MetavCUT bieten wir eine wirtschaftliche Alternative zu Hersteller‑Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. For tailored advice on MetavCUT granulator knives in M35 HSS‑Co, contact Metav Werkzeuge in Emmerich for a quotation and technical guidance Technical data Article number: ECON--40x25x1.65x35D-M35-HSS-Co Label: Zerkleinerungsmesser / Granuliermesser 40 x 25 x 1.65 x 35D für ECON Maschinen aus M35 - HSS-Co Manufacturer: MetavCUT Material: M35 - HSS‑Co Dimensions: 40 x 25 x 1.65 x 35D Core dimensions Nominal dimensions: 40 x 25 x 1.65 x 35D Applications & special features For ECON granulators and shredders Designed for shredding and granulating plastics (films, pipes, sprues, plates) High wear resistance via M35 HSS‑Co construction Factory-ground cutting edge for consistent pellet quality FAQ What materials can this blade process effectively? The MetavCUT granulator knife is manufactured from M35 HSS‑Co and is suitable for processing a wide range of plastic waste such as films, pipes and sprues in shredders and granulators. Is the knife compatible with ECON machines? Yes, the blade is dimensioned and drilled to match the mounting pattern specified for ECON granulators and shredders; refer to the article number ECON--40x25x1.65x35D‑M35‑HSS‑Co for ordering. How does the M35 HSS‑Co alloy improve performance? The cobalt-alloyed high-speed steel in this blade retains hardness at higher temperatures, which helps maintain a sharp cutting edge and extend service intervals in continuous recycling operations. Can the blade be re-sharpened or reconditioned? The MetavCUT cutting geometry permits regrinding where appropriate; reconditioning should follow original tolerances to preserve pellet quality and fitment in the machine. What operational benefits should be expected after switching to this knife? Using this granulator blade typically leads to more uniform pellets, reduced dust generation and fewer blade changes, supporting steadier production and improved material yield. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8 x 35D Granulator Cutter, M2 1.3343 DMo5, For ECON Machines - MetavCUT
Take advantage of the combination of durable high‑speed steel, precise edge geometry and straightforward compatibility with ECON machines for stable production and reduced downtime. Order the required blade directly via Metav Werkzeuge or consult our specialists for configuration advice. Shredding knife / Granulator knife – 40 x 25 x 2.8 x 35D, M2 1.3343 DMo5 (MetavCUT) The Shredding knife / Granulator knife is a hardened cutting blade engineered for reducing plastic waste and producing consistent pellets in industrial recycling and granulation systems. M2 (1.3343 DMo5) high-speed steel construction Precision ground for consistent pellet size Designed for ECON shredders and granulators Higher throughput with consistent pellet quality The Shredding knife / Granulator knife delivers a measurable improvement in output uniformity thanks to its precision-ground cutting edge and optimised geometry. These characteristics reduce fines and fragment variation, resulting in consistent pellet quality and smoother downstream processing. For operators focused on throughput and material yield, the blade’s geometry translates directly into fewer rejects and less machinery cleaning between batches. Built for longevity in heavy-duty recycling Manufactured from M2 1.3343 DMo5, a recognised high-speed steel grade, the component combines hardness and toughness for extended service life under continuous operation. The choice of this material boosts wear resistance at elevated temperatures encountered in intensive shredding and granulation. As a result, replacement intervals are extended and the frequency of spare orders is reduced, supporting reliable machine availability during long production runs. Straightforward fitment that keeps lines moving Intended as a direct replacement for ECON recycling equipment, the blade’s form factor and mounting dimensions enable efficient swap‑outs with minimal machine downtime. The design supports quick re‑installation and alignment, helping to restore cutting performance rapidly after replacement. Clear compatibility reduces planning effort for maintenance cycles, so conveyor and extrusion lines can return to full operation with confidence. MetavCUT: process‑optimised wear parts for productive use Through the MetavCUT brand, a cost‑effective alternative to original manufacturer parts is provided: process‑optimised wear components are engineered to match OEM fits, extend operational life and withstand the demands of continuous industrial recycling. These parts are produced with an emphasis on precision, repeatability and productive durability to support efficient plant operation. Contact Metav Werkzeuge for tailored supply of MetavCUT wear blades or request technical configuration support from our consultants in Emmerich. Technical data Article number: ECON--40x25x2.8x35D-M2-13343-DMo5 Designation: Shredding knife / Granulator knife 40 x 25 x 2.8 x 35D Manufacturer: MetavCUT Core specifications Dimensions: 40 x 25 x 2.8 x 35D Material grade: M2 1.3343 DMo5 Applications & features Suitable for ECON recycling, shredding and pelletising machines Intended use: cutting plastic waste, sprues, films, pipes, plates Function: wear part for granulators and shredders, precision ground edge Benefit: reduced dust and improved pellet consistency FAQ What materials can this blade process? The Shredding knife / Granulator knife from MetavCUT is designed for processing a wide range of plastics encountered in recycling, including films, pipes, plates and injection moulding sprues. How does the M2 1.3343 DMo5 material affect service life? M2 1.3343 DMo5 is a high‑speed steel chosen for its balance of hardness and toughness; the material selection for the MetavCUT blade supports enhanced wear resistance and longer service intervals under continuous operation. Is this blade compatible with all ECON granulators and shredders? The blade’s dimensions and mounting pattern are specified for ECON recycling and granulation machines; compatibility is indicated for ECON equipment and the blade is intended as a direct replacement wear part. Can the blade be resharpened or must it be replaced? The MetavCUT granulator blade is engineered for durable use; resurfacing is possible depending on wear pattern and local workshop capability, though replacement with a precision component is recommended to restore original cutting geometry. What operational benefits can be expected after fitting this blade? Fitting a precision, process‑optimised blade such as this improves pellet uniformity, reduces dust generation and helps maintain steady machine throughput, contributing to more efficient downstream processing. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8 x 35D Granulator/Crusher Knife, 1.3207 EW9Co10 - MetavCUT
Take advantage of the combination of durable cobalt-alloyed high-speed steel, precise 40 x 25 x 2.8 x 35D dimensions and a design tailored for ECON recycling systems to ensure consistent pellet quality and reduced downtime. Order the Granulator knife 40 x 25 x 2.8 x 35D for ECON directly via Metav Werkzeuge or ask our consultants if needed. Granulator knife 40 x 25 x 2.8 x 35D for ECON machines — MetavCUT, 1.3207 EW9Co10 The Granulator knife 40 x 25 x 2.8 x 35D is a precision cutting blade engineered for use in ECON recycling and granulation machinery to produce uniform granulate from plastic waste streams. 1.3207 EW9Co10 cobalt-alloyed steel Precision ground cutting edges Compatible with ECON recycling machines Consistent granulate, reduced dust Durable material for prolonged cutting performance The blade is manufactured from 1.3207 EW9Co10, a cobalt-alloyed high-speed steel grade chosen for its enhanced wear resistance and thermal stability under demanding cutting conditions. This material selection reduces micro-chipping and edge wear when processing common feedstocks such as film, pipes or sprues, meaning fewer unscheduled stops for replacement. The use of a cobalt-alloyed substrate is particularly beneficial for continuous operation, where blade temperature can rise and conventional tool steels would lose hardness; the result is a more reliable production rhythm and lower overall tooling consumption. Precision dimensions that deliver consistent output With nominal dimensions of 40 x 25 x 2.8 x 35D, the cutting geometry is matched to the rotor and stator tolerances of ECON units, supporting even chip formation and uniform pellet size. Precision grinding of the cutting edge and controlled tolerances contribute to reduced dust generation and better downstream handling of material. For operators, this translates into improved product quality and reduced sorting or rework. The blade geometry also supports predictable cutting forces, which benefits motor load stability and can help extend the service life of other machine components. Engineered for straightforward maintenance and process efficiency The blade design focuses on interchangeability and a clean interface with standard ECON mounts, enabling quick replacement and minimal adjustment time. Sharp, accurately finished edges reduce friction and heat build-up during cutting, which lowers the risk of polymer melting and agglomeration at the knife face. This contributes to stable throughput and consistent granulate quality over longer production runs. As part of MetavCUT’s process-optimised wear parts, the knife is intended to contribute to lower lifetime costs through reduced frequency of replacement and predictable maintenance intervals. Wir bieten eine wirtschaftliche Alternative zu Hersteller-Originalteilen von MetavCUT: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. Discuss MetavCUT granulator knives with Metav Werkzeuge for fast, reliable supply from Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: ECON--40x25x2.8x35D-13207-EW9Co10 Name: Granulator knife / shredder blade 40 x 25 x 2.8 x 35D for ECON machines Brand: MetavCUT Facts Dimensions: 40 x 25 x 2.8 x 35D Special features Material: 1.3207 EW9Co10 Application: Recycling plants, shredding and pelletising systems for ECON equipment FAQ What materials can be processed with this blade? The MetavCUT granulator knife made from 1.3207 EW9Co10 is suitable for conventional plastic waste streams such as films, sprues, pipes and plates when used in ECON shredders and granulators. Is this knife compatible with standard ECON rotors and holders? Yes. The knife is specified to the 40 x 25 x 2.8 x 35D interface and is intended for direct fitment in ECON recycling and pelletising machines. How does the material choice affect blade life? The cobalt-alloyed 1.3207 EW9Co10 composition provides improved wear resistance and thermal stability, which helps maintain edge sharpness and extend operational life under continuous cutting loads. Can the blade be resharpened or is it a one-time component? Resharpening may be possible depending on wear pattern and remaining edge geometry; however, the blade is supplied as a process-optimised replacement part designed for reliable performance and predictable life cycles. MetavCUT — Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8 x 40D Granulator/Shredder Cutter, M2 (1.3343/DMo5) - MetavCUT
High-performance M2 1.3343 DMo5 tool steel and exact 40 x 25 x 2.8 x 40D geometry deliver consistent pellet quality and low dust generation, while direct compatibility with ECON machines ensures fast replacement and reliable production. Order the granulator knife directly via Metav Werkzeuge or ask the consultants if needed. Granulator / Shredder Knife 40 x 25 x 2.8 x 40D by MetavCUT — M2 1.3343 DMo5, for ECON machines The Granulator / Shredder Knife 40 x 25 x 2.8 x 40D is a wear part for recycling and pelletising systems, designed to reduce plastic waste and to produce uniform granulate in ECON shredders and granulators Granulating and shredding geometry Hardened M2 1.3343 DMo5 steel Exact dimensions 40 x 25 x 2.8 x 40D Compatible with ECON recycling machines Consistent pellet quality through precise material and edge geometry The knife is manufactured from M2 1.3343 DMo5, a high-speed tool steel selected for its combination of hardness and toughness. This material choice supports a sharp, stable cutting edge that preserves shape under cyclic loads, resulting in consistent pellets and reduced fines. The designed cutting geometry promotes even material flow and cutting action, which directly improves downstream handling and reduces rejects. By focusing on metallurgical quality and edge form, operational variation is minimised and process stability is enhanced. Longer productive intervals and reliable wear behaviour Made as a dedicated wear part, the blade’s material properties translate into slower wear progression compared with lower-grade steels. This durability helps to extend service intervals and lowers unplanned downtime, supporting predictable maintenance cycles. For recycling operations where throughput and uptime are critical, such reliable wear behaviour reduces handling costs and the frequency of spare-part orders, contributing to a more economical production rhythm without sacrificing cutting performance. Accurate fit and reduced process emissions for ECON systems The knife’s dimensions 40 x 25 x 2.8 x 40D ensure a precise fit in ECON shredders and granulators, reducing vibration and minimising air-born dust during cutting. A well-matched blade seat helps maintain correct knife-to-knife clearance, which is essential for uniform granulate and low contamination. Intended applications include processing of plastic waste streams such as sprues, films, pipes and plates, where a clean cut reduces secondary operations and improves material quality for reuse or re-extrusion. MetavCUT — a practical alternative to original parts As a production-focused option, this replacement knife is engineered to meet the demands of high-volume recycling and pelletising. The combination of targeted material selection and dimensional accuracy delivers cost-efficient performance for everyday industrial use, while being straightforward to install and replace in standard ECON modules. Wir bieten eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Mit MetavCUT prozessoptimierte Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. Contact Metav Werkzeuge for tailored replacement knives and supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ECON--40x25x2.8x40D-M2-13343-DMo5 Product name: Granulator / Shredder Knife 40 x 25 x 2.8 x 40D Manufacturer: MetavCUT Facts Dimensions: 40 x 25 x 2.8 x 40D Material hardness class: M2 1.3343 DMo5 Special features Material: M2 1.3343 DMo5 Application: granulating and shredding in recycling and pelletising lines Suitable for: processing plastics, sprues, films, pipes, plates Compatibility: ECON recycling and granulator machines Role: wear part for shredders, granulators and pelletisers FAQ What materials can be processed with this knife? The MetavCUT granulator/shredder knife is suitable for a wide range of plastic waste streams including sprues, films, pipes and plates; it is specified as a wear part for processing plastics in ECON systems. Is the knife a direct replacement for ECON equipment? Yes, the geometry and 40 x 25 x 2.8 x 40D dimensions match ECON installation requirements, enabling straightforward replacement without modification. How does the M2 1.3343 DMo5 material benefit production? M2 1.3343 DMo5 offers a balance of hardness and toughness that preserves edge stability under cyclic loads, which leads to consistent pellet quality and longer service intervals for the knife. Can this knife reduce dust and fines during granulation? Correct geometry and precise fit in the cutterhead help to reduce vibration and minimise dust formation, supporting cleaner granulate and less downstream processing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8 x 40D Shredder/Granulator Knife, 1.3207 EW9Co10 - MetavCUT
Benefit from the EW9Co10 high‑cobalt steel composition, exact 40 x 25 x 2.8 x 40D dimensions and direct compatibility with ECON recycling systems — order the blade directly via Metav Werkzeuge or consult our specialists if required. Shredding and Granulating Knife 40 x 25 x 2.8 x 40D (EW9Co10) — MetavCUT The Shredding and Granulating Knife 40 x 25 x 2.8 x 40D is a precision cutting tool for shredders, granulators and pelletisers in ECON recycling systems, engineered to produce uniform regrind and stable process performance. Made from EW9Co10 high‑cobalt steel Precise 40 x 25 x 2.8 x 40D dimensions Compatible with ECON recycling machines Optimised for low dust and uniform output Consistent granulate quality through precise cutting A correctly profiled cutting edge delivers measurable process benefits. The blade’s 1.3207 EW9Co10 grade provides a hard, wear‑resistant matrix that keeps the edge geometry stable under continuous load, translating into uniform pellet size and reduced fines. Consistent fragment dimensions improve downstream drying and extrusion yields, while a precision ground edge minimises frictional heat and thus dust generation, which supports cleaner operation and reduced filtration load. Technical advantages are presented in straightforward terms to aid procurement and production planning. Long service life with predictable maintenance intervals Durability is engineered into the material and profile to lower total operating costs. The cobalt‑alloy composition resists abrasive wear and retains cutting geometry longer than standard tool steels, enabling extended run times between changes and fewer unscheduled stops. Fit and finish follow ECON mounting standards so replacement is rapid and predictable, reducing downtime. The result is improved uptime and simplified inventory planning for replacement knives and spare sets — a clear efficiency gain for continuous recycling operations. Simple integration and supply reliability from Metav The knife is supplied to match ECON machine interfaces and is dimensioned as 40 x 25 x 2.8 x 40D for direct installation in shredders and granulators. MetavCUT production focuses on process‑optimised wear parts that are manufactured to consistent tolerances, supporting repeatable installation and process settings. Metav’s presence in Emmerich acts as a quality filter for the European market, ensuring steady availability and traceability of parts. Mit MetavCUT wird eine wirtschaftliche Alternative zu Originalteilen geboten: prozessoptimierte Verschleißteile, passgenau, langlebig und für den produktiven Einsatz konzipiert. Speak to Metav Werkzeuge for specification checks, rapid replacement supply and tailored recommendations for MetavCUT knives compatible with ECON systems — Metav Werkzeuge is ready to assist. Technical Data Article number: ECON--40x25x2.8x40D-13207-EW9Co10 Manufacturer: MetavCUT Material: 1.3207 EW9Co10 Dimensions: 40 x 25 x 2.8 x 40D Facts Dimensions: 40 x 25 x 2.8 x 40D Material designation: 1.3207 EW9Co10 SKU: ECON--40x25x2.8x40D-13207-EW9Co10 Special features For ECON recycling and granulation machines Suitable for shredders, granulators and pelletisers High‑wear cobalt‑grade steel Precision ground cutting edge Reduces dust and ensures uniform granulate FAQ How does the EW9Co10 material affect blade life? The EW9Co10 composition in this MetavCUT knife increases wear resistance and heat tolerance compared with standard tool steels, so the blade retains its edge longer and extends service intervals. Is this blade compatible with all ECON shredders and granulators? The knife is specified for ECON recycling systems and is dimensioned 40 x 25 x 2.8 x 40D to match typical ECON mounting; compatibility should be confirmed against the machine’s spare‑parts list and mounting drawing. Can the blade be re‑sharpened or must it be replaced? Depending on wear and the required cut quality, the blade can be reprofiled, but MetavCUT replacement knives are optimised for cost‑effective exchange to maintain consistent granulate quality. What process benefits can be expected after fitting this knife? Fitting a precision ground MetavCUT granulating blade reduces dust generation and produces more uniform particles, improving downstream handling and extrusion stability. What is the exact article number for ordering spares? Order using SKU ECON--40x25x2.8x40D-13207-EW9Co10 to ensure the correct MetavCUT knife and specifications are supplied. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8/1.7 x 40D Granulator/Knife For ECON Recycling Machines, M2 1.3343 DMo5 - MetavCUT
Take advantage of the combination of durable M2 tool steel, precise fit and proven compatibility with ECON recycling equipment to maintain steady production and consistent pellet quality. Order the replacement blades directly via Metav Werkzeuge or consult our technical team for application-specific advice. APL002 Granulator and Shredder Blade — 40 x 25 x 2.8/1.7 x 40D, M2 (1.3343 DMo5) by MetavCUT A robust replacement blade for ECON recycling and granulation systems, designed to deliver uniform cuts and reliable wear performance in continuous industrial operation. Hard M2 (1.3343 DMo5) tool steel Precision 40 x 25 x 2.8/1.7 x 40D dimensions Compatible with ECON recycling and granulator machines Consistent pellet quality for steady production flow The APL002 blade is engineered to produce uniform pellets and granules, reducing rework and improving downstream processing. Fitted in shredders and granulators, the cutting geometry promotes a clean shear that helps to minimise fines and dust. By achieving a consistent strand or chip size, the blade supports predictable melting and extrusion behaviour, which in turn helps stabilise cycle times and reduces material losses during reprocessing. Durable high-speed steel that extends runtime Manufactured from M2 (1.3343 DMo5) high-speed steel, the blade offers a balanced combination of hardness and toughness suitable for abrasive and intermittent loads typical in recycling environments. The selected alloyation improves resistance to wear and chipping while allowing for economical regrinding during scheduled maintenance. For operations that prioritise uptime, this material choice supports longer intervals between exchanges and conserves tool inventories. Precision fit that reduces changeover time Exact adherence to the specified dimensions — 40 x 25 x 2.8/1.7 x 40D — ensures a snug, repeatable fit in ECON housings and carrier plates. A precise fit keeps blade clearance uniform across the cutting circle, reducing vibration and uneven wear that can shorten service life. When blades are correctly matched to the rotor, the result is lower noise, less dust generation and fewer unplanned stops for adjustment, improving overall equipment effectiveness. Practical advantages for recyclers and processors As a dedicated wear part for shredders, granulators and pelletisers, the blade is designed for operational reliability rather than decorative finishes. The geometry and edge preparation focus on performance: sharp cutting edges for clean separation, dimensional accuracy for uniform product and a substrate that supports economical refurbishment. For facilities processing films, pipes, plates or sprues, these attributes translate into higher throughput and more consistent regranulate quality. Installation and lifecycle considerations Replacement intervals depend on processed material and operating conditions; however, the combination of wear-resistant M2 steel and correct mounting practice leads to predictable maintenance cycles. Blades can be reground where appropriate to restore cutting geometry; maintaining documentation of run hours and processed tonnage will help in planning reorder and regrind schedules. When in doubt about suitability for a specific material stream or machine setup, technical specifications and compatibility notes are available from our product advisors. For reliable, application-ready MetavCUT replacement blades for ECON systems, contact Metav Werkzeuge in Emmerich for tailored advice and supply coordination. With our MetavCUT range an economical alternative to original manufacturer parts is provided: process-optimised wear components that are precisely matched, long-lasting and engineered for productive industrial use. Technical data Article number: ECON-APL002-40x25x2.8/1.7x40D-M2-13343-DMo5 SKU: ECON-APL002-40x25x2.8/1.7x40D-M2-13343-DMo5 Label: Zerkleinerungsmesser / Granuliermesser 40 x 25 x 2.8/1.7 x 40D APL002 für ECON Maschinen aus M2 1.3343 DMo5 Manufacturer: MetavCUT Facts Dimensions: 40 x 25 x 2.8/1.7 x 40D Material designation: M2 (1.3343 DMo5) SKU identifier: ECON-APL002-40x25x2.8/1.7x40D-M2-13343-DMo5 Special features For use in shredders, granulators and pelletisers Designed for ECON recycling and granulation machines Optimised cutting geometry for low dust and consistent pellets Suitable for regrinding and refurbishment where applicable FAQ Is this blade compatible with all ECON granulators and shredders? The APL002 granulator and shredder blade is specified for use in ECON recycling and granulator machines; compatibility is confirmed by matching the 40 x 25 x 2.8/1.7 x 40D dimensions and mounting pattern to the target machine model. What advantages does M2 (1.3343 DMo5) offer for recycling blades? M2 (1.3343 DMo5) provides a balance of wear resistance and toughness appropriate for abrasive polymer streams; the APL002 blade uses this alloy to extend service intervals and allow controlled regrinding. Can the blade be resharpened or refurbished? The APL002 blade is suitable for refurbishment by regrinding where the parent material remains within tolerances; regrinding restores cutting geometry and can extend the component’s useful life. Which materials can be processed with this blade? This blade is intended for typical recycling tasks such as plastics, films, pipes and sprues; cutting performance will depend on material composition and contaminants — the APL002 is optimised for general recycling streams in ECON equipment. How does the blade influence dust and fines generation? The precision geometry and sharp edge of this blade reduce tearing and promote clean cuts, which helps to lower dust and fine particle generation and yields more consistent granulate quality. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 30 x 1.65 x 35D Granulator/Crusher Knife, M2 1.3343 DMo5 - MetavCUT
Take advantage of precision-ground M2 (1.3343 / DMo5) steel and exact 40 x 30 x 1.65 x 35D sizing for reliable cutting performance and consistent pellet quality; order directly via Metav Werkzeuge or request advice from our consultants. Granulator / Shredder Knife 40 x 30 x 1.65 x 35D — M2 (1.3343 / DMo5) by MetavCUT The Granulator / Shredder Knife 40 x 30 x 1.65 x 35D is a wear part for ECON recycling and granulating machines, engineered to deliver uniform pellet size and reduced dust in continuous processing. Precision-ground M2 steel for durable edges Exact 40 x 30 x 1.65 x 35D dimensions Compatible with ECON recycling machines Optimised for consistent pellet size and low dust Consistent pellet quality and lower fines for easier reprocessing Sharp, precisely ground cutting edges on this granulator blade ensure a clean shearing action, producing uniformly sized granulate with fewer fines and lower dust generation. Consistent particle geometry improves downstream handling, drying and re-extrusion, resulting in more reliable material properties and reduced waste. The combination of edge geometry and correct clearance reduces friction and heat at the cutting zone, which translates into improved cut quality and longer intervals between maintenance. Robust M2 high‑speed steel for sustained performance Manufactured from M2 (1.3343 / DMo5), a proven high‑speed steel grade, the knife offers high wear resistance and retained hardness at elevated temperatures. The material’s metallurgical properties support repeated regrinding and refurbishment, extending service life compared with standard tool steels. For workshop planning this means fewer replacements and predictable tool management; the material choice therefore contributes directly to process economy and operational uptime while maintaining cutting performance. Exact fit and process stability for ECON lines With true-to-dimension sizing of 40 x 30 x 1.65 x 35D, this blade is designed for direct fitment into ECON shredders and granulators, simplifying stock keeping and replacement procedures. Correct fitment reduces vibration and uneven wear, which preserves both process stability and blade geometry over time. As a standardised wear part for recycling plants, the knife supports steady production cycles and straightforward inventory control, helping maintenance teams to plan interventions with confidence. Choose MetavCUT granulator knives for dependable cutting performance — contact Metav Werkzeuge in Emmerich for expert advice and reliable supply. Technical data Article number: ECON--40x30x1.65x35D-M2-13343-DMo5 Designation: Granulator / shredder knife 40 x 30 x 1.65 x 35D Manufacturer: MetavCUT Core data Dimensions: 40 x 30 x 1.65 x 35D Material grade: M2 (1.3343 / DMo5) Application: Recycling and granulating machines (ECON) Special features For shredders, granulators and pelletisers Precision-ground cutting edges Optimised for consistent pellet size and low dust Wear part for recycling applications FAQ What materials can this knife process effectively? The granulator / shredder knife made from M2 (1.3343 / DMo5) is intended for common plastic waste streams used in recycling and is suitable for typical thermoplastics processed in ECON machines. Is the blade compatible with all ECON shredder models? The knife is specified for ECON recycling and granulating machines matching the 40 x 30 x 1.65 x 35D mounting; confirm chassis and holder dimensions against the product designation ECON--40x30x1.65x35D-M2-13343-DMo5 for compatibility. Can the M2 knives be reground to extend life? Yes, the M2 (1.3343 / DMo5) composition is chosen to allow refurbishment by regrinding; proper workshop reconditioning preserves cutting geometry and restores cut quality. What operational benefits does this wear part provide? Using a precision-ground MetavCUT blade reduces dust and fines, yields more uniform pellets and supports steadier machine operation, contributing to easier downstream processing and improved material yield. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com MetavCUT supplies a cost-effective alternative to OEM parts; these process‑optimised wear components fit precisely, deliver long service life and are engineered for continuous production.
40 x 30 x 2.8 x 35D Granulator Knife ECON21, M2 1.3343 (DMo5) - MetavCUT
Take advantage of the combination of durable M2 tool steel, precise ground geometry and straightforward compatibility for reliable production runs; order replacement knives directly via Metav Werkzeuge or consult the team for application advice. ECON21 Shredder / Granulator Knife — 40 x 30 x 2.8 x 35D, M2 (1.3343 DMo5) by MetavCUT The ECON21 is a precision replacement knife for ECON recycling and granulating machines, engineered to deliver consistent cutting performance in shredders and granulators. M2 (1.3343 DMo5) high-speed tool steel Precisely ground 40×30×2.8×35D profile Compatible with ECON shredders and granulators Optimised for low dust and uniform granulate Consistent cuts that reduce downstream rejects The replacement blade is designed for repeatable, clean cuts which translate into uniform pellet size and fewer rejects. Using a blade made from M2 (1.3343 DMo5) ensures a balance between hardness and toughness, so the knife maintains its profile under continuous load. The precise geometry of the knife reduces the formation of fines and dust, which helps to protect screens and sieves and lowers the need for secondary processing. This yields measurable productivity gains and a steadier product quality for industrial recycling lines. Material selection that extends wear life Manufactured from M2 tool steel, the blade combines high wear resistance with good edge stability. In practical terms, this means longer intervals between regrinds and reduced consumable turnover. The steel grade is chosen for its ability to hold a sharp edge at the operating temperatures typical in shredding and granulation, while resisting chipping on mixed plastic streams. For operations that value predictable maintenance cycles, the material choice contributes directly to lower total cost of ownership and fewer unscheduled stops. Designed for process stability and cleaner production Fitted in shredders, granulators or pelletisers, the knife supports stable throughput and cleaner output. The ground cutting edge minimises smearing and ensures that extruded strands or flakes are separated evenly, producing a consistent granulate that feeds downstream processes more effectively. Improved chip formation and reduced dust generation also support safer and cleaner plant conditions, which can reduce filter loading and maintenance on extraction systems. Simple replacement, clear compatibility and commercial reliability The blade is manufactured to match the 40 x 30 x 2.8 x 35D profile used in ECON equipment, which simplifies inventory management and reduces fitment errors during maintenance. As a dedicated wear part, the knife is precision ground to ensure a straightforward swap with OEM geometries. The combination of reliable dimensions and high-grade steel delivers a pragmatic upgrade path for plants seeking cost-effective sustainability in daily operation. Wir bieten dir mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. Contact Metav Werkzeuge for expert guidance on MetavCUT ECON21 knives and to secure suitable replacement blades directly from stock at Metav Werkzeuge. Technical data Article number: ECON-ECON21-40x30x2.8x35D-M2-13343-DMo5 Product: ECON21 shredder/granulator knife Material: M2 (1.3343 DMo5) Manufacturer: MetavCUT Facts Dimensions: 40 x 30 x 2.8 x 35D SKU: ECON-ECON21-40x30x2.8x35D-M2-13343-DMo5 Suitability: ECON recycling and granulating machines Special features Suitable for shredders, granulators and pelletisers Optimised for consistent pellet size and low dust High wear resistance due to M2 tool steel Precision ground cutting edges for repeatable performance FAQ What machines is this knife compatible with? The knife is compatible with ECON recycling, shredding and granulating machines; the ECON21 blade matches the specified profile for direct replacement. What material is the blade made from and why does it matter? Manufactured from M2 (1.3343 DMo5) tool steel, the blade offers a combination of hardness and toughness that extends wear life and maintains edge stability under cutting loads. How does this knife affect granulate quality? A precisely ground edge produces more uniform pellets and reduces fines and dust, which improves downstream processing and reduces sorting or sieving effort. Can the blade be resharpened or is it a single-use part? The knife is a replaceable wear part; resharpening is possible depending on wear pattern, but the M2 material is selected to maximise time between regrinds. Does the blade suit mixed-plastic streams? Yes, the blade’s geometry and material make it appropriate for mixed plastic waste streams commonly processed in industrial recycling plants. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 30 x 2.8 x 35D Granulator Knife For Recycling Machines, EW9Co10 1.3207 - MetavCUT
Take advantage of a wear-resistant design and precise dimensions for consistent pellet quality and reduced dust generation; the 1.3207 (EW9Co10) construction and the exact 40 x 30 x 2.8 x 35D profile ensure reliable performance in ECON systems. Order the knife directly via Metav Werkzeuge or consult our technical team for application advice. ECON21 Granulator and Shredder Knife – 40 x 30 x 2.8 x 35D (1.3207 EW9Co10) by MetavCUT The ECON21 is a granulator and shredder blade crafted for ECON recycling machines, delivering sharp, consistent cuts for efficient pelletising and shredding applications. Precision fit for ECON recycling machines High-cobalt 1.3207 (EW9Co10) steel for long edge life Reduced dust and consistent particle size Increase throughput with consistent cutting performance The blade is engineered to provide a consistent cutting geometry, which translates directly into steadier throughput and less process variation. Manufactured from 1.3207 (EW9Co10) high-cobalt steel, the component retains its edge under continuous load, reducing the frequency of changeovers. For recycling and granulation systems, this means fewer interruptions and more predictable output, improving overall plant efficiency. Clear, repeatable cuts also support downstream sieving and drying processes by producing a uniform particle size, which eases handling and improves final regranulate quality. Durable material and precise fit reduce total operating costs The combination of a robust alloy and accurate machining results in higher wear resistance and stable blade geometry over time. The specified dimensions 40 x 30 x 2.8 x 35D assure a direct replacement fit in compatible ECON machines, eliminating time spent on fine adjustment or secondary machining. A blade that maintains its profile reduces the generation of fines and dust, lowering housekeeping effort and extending service intervals for screens and conveyors. The high-cobalt composition offers improved toughness at elevated temperatures, making the component suitable for continuous industrial use where edge stability matters. Designed for cleaner cuts and easier maintenance Sharp, well-fitting knives lead to cleaner cuts that reduce the risk of melting, stringing or contamination in thermoplastic streams. The stable edge geometry contributes to a lower dust fraction, which benefits both product quality and workplace cleanliness. Maintenance routines become more predictable: scheduled inspections and rotating spares can be coordinated around actual wear rates rather than unexpected failures. Documentation of dimension and material supports quality control procedures and helps maintenance teams plan blade inventories to match production cycles. For reliable long-term performance in ECON granulators and shredders, choose the MetavCUT ECON21 knife via Metav Werkzeuge—contact our specialists in Emmerich for precise compatibility and supply guidance Wir bieten dir mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. Technical data Article number: ECON-ECON21-40x30x2.8x35D-13207-EW9Co10 SKU: ECON-ECON21-40x30x2.8x35D-13207-EW9Co10 Facts Dimensions: 40 x 30 x 2.8 x 35D Material designation: 1.3207 (EW9Co10) Special features Suitable for ECON recycling, shredding and pelletising machines Application: granulating, shredding plastics, sprues, films, pipes and plates Designed for reduced dust, uniform particle size and long edge life FAQ What materials can this knife handle? The ECON21 blade is specified for plastics processing tasks common to recycling and granulating; its design supports cutting of films, sprues, pipes and plates in ECON systems. Is the knife a direct replacement for ECON machines? Yes, the ECON21 is manufactured to the stated dimensions for direct fitment in compatible ECON recycling and granulation equipment. How does the 1.3207 (EW9Co10) material benefit operation? The high-cobalt alloy in the ECON21 increases edge retention and toughness under continuous operation, extending service intervals and stabilising cut quality. Can this blade reduce dust and fines during processing? Engineered cutting geometry and precise tolerances of the knife help produce uniform particle size and lower the proportion of fines compared with worn or poorly fitting blades. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 16.5 x 3.6 Granulator Cutter Blade For GALA Recycling Machines, 1.3207 EW9Co10 - MetavCUT
The hard-wearing composition and exact dimensions ensure long service life and consistent pellet quality in GALA systems. Combine high wear resistance, precise fitting and compatibility with GALA shredders or granulators for reliable production. Order the replacement directly via Metav Werkzeuge or consult our specialists for selection support. Zerkleinerungsmesser / Granuliermesser 40.6 x 16.5 x 3.6 — precision blade for GALA recycling and granulation equipment Zerkleinerungsmesser / Granuliermesser 40.6 x 16.5 x 3.6 is a purpose-made replacement blade for shredders and granulators, produced from high-alloy tool steel for durable cutting performance Precision-ground 1.3207 EW9Co10 tool steel Dimensions 40.6 x 16.5 x 3.6 mm Compatible with GALA shredders and granulators Optimised for uniform pellet and regranulate quality Consistent cuts through high-wear tool steel The blade is manufactured from 1.3207 EW9Co10, a cobalt-alloyed tool steel chosen for wear resistance and edge stability. This composition resists abrasive plastics and fillers, keeping the cutting edge sharper for longer and reducing the frequency of replacements. For operations where changeover time is valuable, the material choice translates into measurable uptime gains and fewer interruptions for blade swaps. Exact fit for stable operation and uniform output With dimensions of 40.6 x 16.5 x 3.6 mm, the blade is produced to tight tolerances to match GALA machine mounting points. A precise fit lowers vibration and runout, which directly improves pellet consistency and reduces fines and dust. Operators benefit from steadier throughput and more predictable downstream processing, while maintenance teams find blade reinstallation straightforward thanks to the accurate form factor. Designed for production use and lower lifecycle cost As a replacement wear part from MetavCUT, this granulator knife is optimised for continuous industrial use: sharp geometry for clean shearing, robust steel for prolonged service life and dimensions that maintain process stability. The practical result is less manual rework, reduced material loss and a more reliable granulation process. Where sustainability matters, longer-lived components also mean fewer spare parts consumed over time. We offer an economical alternative under the MetavCUT brand: our process-optimised wear parts are precisely fitting, durable and specifically developed for productive use. For tailored MetavCUT replacements and rapid supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge to secure durable, process-optimised blades for GALA equipment. Technical data Article number: GALA--40.6x16.5x3.6-13207-EW9Co10 Item: Zerkleinerungsmesser / Granuliermesser 40.6 x 16.5 x 3.6 Brand: MetavCUT Material: 1.3207 EW9Co10 Core specifications Dimensions: 40.6 x 16.5 x 3.6 mm Thickness: 3.6 mm Applications and special features For use in shredders, granulators and pelletisers Ensures uniform pellet size and reduced dust Process-optimised geometry for industrial production FAQ Which machines is this blade compatible with? The blade is specified for recycling and granulation lines of GALA; the article GALA--40.6x16.5x3.6-13207-EW9Co10 fits standard GALA shredders and granulators. What advantage does the 1.3207 EW9Co10 material provide? The 1.3207 EW9Co10 composition provides enhanced wear resistance and edge retention, so the MetavCUT granulator knife maintains cutting performance over extended service intervals. Can the blade be resharpened to extend service life? Resharpening depends on the wear pattern; the MetavCUT recycling knife can be reground where geometry permits, helping to recover edge quality and extend usable life. How does precise fitting affect production quality? A precise fit reduces vibration and runout, which improves pellet uniformity and lowers dust generation, supporting steadier throughput and less downstream sorting. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 16.5 x 3.6 Granulator/Chipper Cutter M2 (1.3343 DMo5) For GALA Machines - MetavCUT
High-performance M2 construction and exact 40.6 × 16.5 × 3.6 mm dimensions deliver consistent pellet size, reduced dust and extended runtime; benefit from a precise fit for GALA systems and robust, process-optimised wear behaviour. Order the granulating knife directly via Metav Werkzeuge or consult our specialists for application-specific advice. Granulating / Shredding Knife 40.6 × 16.5 × 3.6 mm (M2 1.3343 DMo5) — MetavCUT A Granulating / Shredding Knife 40.6 × 16.5 × 3.6 mm engineered for reliable size reduction in GALA recycling and pelletising machinery Solid M2 (1.3343 DMo5) wear steel Precise fit 40.6×16.5×3.6 mm for GALA systems Low-dust cutting for consistent pellet quality Process-optimised edge geometry for long service life Proven material and cutting performance for stable production Constructed from M2 (1.3343 DMo5) high-speed tool steel, this granulating knife offers a balance of hardness and toughness that supports sharp cutting edges and predictable wear behaviour. The combination of heat-treated substrate and optimised geometry produces a consistent cut with reduced fines, which directly improves downstream screening and drying performance. Hardness and wear resistance are explained here so procurement and operations can assess lifetime and replacement intervals without specialist metallurgy knowledge. Fit and function that reduce downtime and material loss Designed to match the specified dimensions, the knife provides a precision fit in GALA shredders and pelletisers, eliminating play that can accelerate wear or generate noise. Stable mounting and a clean shearing action lower the amount of dust and micro-particles generated, improving process yield and reducing cleaning intervals. For production environments where throughput and repeatability matter, the geometry and tolerances translate into fewer unscheduled stops and a more predictable maintenance schedule. Maintenance, replacement and sustainability advantages The component’s wear characteristics are tuned to be process-optimised, allowing predictable rotation of spare parts and simpler stock-keeping. Replacement is straightforward when scheduled, limiting labour time and preserving machine availability. By maintaining sharp, matching knives, the system achieves better material quality for regranulate, supporting circular economy goals through higher-quality recyclate. MetavCUT supplies an economical, production-focused alternative to original parts without compromising on fit or longevity — a practical choice for continuous recycling operations. We offer an economical alternative to original manufacturer parts under the MetavCUT brand: our process-optimised wear parts are precisely fitting, long-lasting and engineered specifically for productive, industrial use. Contact Metav Werkzeuge today to secure MetavCUT granulating knives optimised for GALA systems and ensure uninterrupted recycling throughput — our consultants can advise on fitment and stock planning Technical data Article number: GALA--40.6x16.5x3.6-M2-13343-DMo5 Product name: Zerkleinerungsmesser / Granuliermesser 40.6 x 16.5 x 3.6 für GALA Maschinen aus M2 1.3343 DMo5 Manufacturer: MetavCUT Specifications Dimensions: 40.6 × 16.5 × 3.6 mm Material: M2 (1.3343 DMo5) SKU: GALA--40.6x16.5x3.6-M2-13343-DMo5 Applications & features Suitable for GALA recycling, shredding and pelletising systems Designed for plastics size reduction and pellet cutting Process-optimised edge geometry for low dust and uniform granulate Wear part intended for productive, continuous use FAQ What materials can be processed with this knife? This granulating knife is intended for plastics size reduction; used in shredders and pelletisers it reliably processes common plastics and offcuts to produce uniform granulate. Is the knife compatible with GALA machines? Compatibility is specified for GALA systems; the part is manufactured to the stated dimensions for direct fitting in the corresponding holder and mounting arrangement. How does the M2 (1.3343 DMo5) material affect service life? M2 tool steel combines hardness and toughness to sustain sharp edges under continuous load, providing predictable wear behaviour and longer intervals between replacements. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 16.5 x 3.6/2 Granulator Knife For GALA Machines, 1.3207 EW9Co10 - MetavCUT
Take advantage of durable, wear-resistant steel and precision-ground geometry to secure consistent pellet quality and reduced downtime; order the blade directly via Metav Werkzeuge or contact our consultants for compatibility advice. Granulator and Shredder Knife 40.6 x 16.5 x 3.6/2 – 1.3207 EW9Co10 (MetavCUT) Granulator and Shredder Knife 40.6 x 16.5 x 3.6/2 for GALA recycling and granulation machines, engineered to deliver consistent cutting performance and long service life Wear-resistant 1.3207 EW9Co10 steel Exact dimensions 40.6 x 16.5 x 3.6/2 mm Designed for GALA recycling machines Precision ground for clean, even cuts Maximise throughput with uniform cutting quality The knife is designed to ensure consistent pellet quality and stable machine throughput in recycling and granulation lines. Applied in shredders, granulators and cutting mills, the blade ensures a uniform cut size that supports downstream screening and washing processes. Using a wear-resistant steel grade and a precision-ground edge, this component reduces the frequency of unplanned stops and supports predictable production planning. The combination of dimensional accuracy and a sharp cutting geometry results in reduced dust generation and fewer rework cycles, which directly improves processing efficiency. Material choice that extends service intervals Manufactured from 1.3207 EW9Co10, a cobalt-alloyed tool steel chosen for abrasion resistance and edge retention, the blade balances hardness with toughness to withstand the mechanical stresses of recycling applications. The material selection helps retain a sharp edge under cyclic loading and abrasive contact with contaminants often found in feedstock. As a result, tool change intervals are extended and total operating costs are lowered through reduced consumable turnover. The material also contributes to a stable cut surface, supporting downstream quality and lowering the need for secondary processing. Accurate fit for reliable operation and easy replacement With exact dimensions of 40.6 x 16.5 x 3.6/2 mm, the knife is produced to fit GALA machines without additional modification, enabling quick replacement and minimal downtime. Precision grinding of the cutting face improves cutting performance, while the standardised geometry simplifies inventory management for maintenance teams. The blade’s design supports consistent feed behaviour and even wear distributions, which helps maintain output rate and particle homogeneity over time. For operators and maintenance staff, the clear specification and repeatable mounting reduce installation time and the risk of incorrect assembly. Mit der Marke MetavCUT bietet Metav eine kosteneffiziente Alternative zu Originalersatzteilen: Unsere prozessoptimierten Verschleißkomponenten sitzen passgenau, sind langlebig und speziell für den produktiven Dauereinsatz konzipiert. Choose MetavCUT blades via Metav Werkzeuge for predictable machine performance; contact our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and supply. Technical Data SKU: GALA--40.6x16.5x3.6/2-13207-EW9Co10 Article name: Granulator and Shredder Knife 40.6 x 16.5 x 3.6/2 Manufacturer: MetavCUT Material: 1.3207 EW9Co10 Dimensions: 40.6 x 16.5 x 3.6/2 mm Facts Dimensions: 40.6 x 16.5 x 3.6/2 mm Special features Application: recycling, shredding, granulating Compatible with GALA recycling and granulation machines Precision-ground cutting edge Wear part optimised for industrial production environments FAQ What materials can this knife process effectively? The knife, manufactured from 1.3207 EW9Co10, is intended for typical recycling feeds such as plastic waste, films, sprues and profiles used in GALA granulation and shredding systems. Is this blade a direct replacement for GALA machines? Yes, the Granulator and Shredder Knife 40.6 x 16.5 x 3.6/2 is specified to fit GALA recycling and granulation machines and is produced to match the original mounting and dimensional requirements. How does the material 1.3207 EW9Co10 benefit production? The 1.3207 EW9Co10 grade provides improved wear resistance and edge retention, leading to longer service intervals and more stable cutting performance for the blade. Can the blade reduce maintenance-related downtime? By delivering consistent cut quality and extended edge life, the knife reduces the frequency of changes and unplanned stops, improving overall equipment availability in recycling lines. How should the knife be ordered and who supplies it? The blade is supplied under the MetavCUT brand and can be ordered via Metav Werkzeuge; refer to SKU GALA--40.6x16.5x3.6/2-13207-EW9Co10 for exact identification. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 20.6 x 3.6 Granulator Knife, EW9Co10 High-Carbon Tool Steel - MetavCUT
Take advantage of the combination of durable EW9Co10 tool steel, precise 40.6 x 20.6 x 3.6 mm dimensions and fitment for GALA equipment to maintain consistent pellet quality and minimise downtime. Order the MetavCUT granulator/shredder knife directly via Metav Werkzeuge or consult our specialists for application advice. MetavCUT granulator/shredder knife 40.6 x 20.6 x 3.6 mm — EW9Co10 wear-resistant steel MetavCUT granulator/shredder knife 40.6 x 20.6 x 3.6 mm is a purpose-built cutting blade for GALA recycling and pelletising machinery, designed to reduce plastic waste and convert extruded strands into uniform regranulate. High-wear EW9Co10 tool steel Exact size 40.6 x 20.6 x 3.6 mm Compatible with GALA granulators and shredders Sharp ground edge for clean cuts Reliable cutting performance for continuous operation The blade is manufactured from 1.3207 EW9Co10, a cobalt-alloyed tool steel chosen for wear resistance under high-stress conditions. This material selection keeps the cutting edge stable at elevated temperatures and during abrasive processing, which translates into fewer production interruptions and longer intervals between regrinds. The engineering focus is on consistent mechanical properties, which supports steady throughput in recycling lines and granulators. Consistent pellet quality with reduced dust and fines A precisely ground geometry delivers a clean shearing action, producing uniform particle sizes and minimising fines and dust generation. Uniform output simplifies downstream screening and drying processes, improving bulk material handling and product quality. The controlled cutting behaviour helps maintain extrusion and pelletising efficiency, reducing waste and promoting predictable process control. Exact dimensions for straightforward replacement With nominal dimensions 40.6 x 20.6 x 3.6 mm, the knife is manufactured to tight tolerances so replacement is reproducible and quick. Proper fitment reduces vibration and blade play, which in turn preserves gearboxes and bearings in the cutting unit. The dimensional accuracy supports repeatable assembly and consistent blade-to-counterknife engagement, essential for both shredders and granulators. Durability that lowers lifecycle costs The material composition and thermal treatment focus on achieving a balance between hardness and fracture toughness. This results in blades that resist edge chipping while maintaining a serviceable cutting angle for longer. Longer blade life reduces tooling exchanges and maintenance windows, contributing to a lower total cost of ownership for recycling operations and pelletising lines. Application scope and compatibility Designed specifically for use in GALA recycling systems, shredders and pelletisers, the blade suits a wide range of polymer processing tasks, from film and sheet to sprues and extrusion strands. Its geometry and material are selected to handle abrasive and soft plastics alike, enabling versatile use across mixed-waste or dedicated production lines. Where process consistency and cut quality are priorities, this knife performs reliably. Contact Metav Werkzeuge for supply and application guidance on MetavCUT granulator and shredder knives to secure continuous production and optimised pellet quality We offer an economical alternative to original manufacturer parts with our MetavCUT brand: our process‑optimised wear parts are precisely fitting, durable and developed specifically for productive use. Technical data Article number: GALA--40.6x20.6x3.6-13207-EW9Co10 Material: 1.3207 EW9Co10 Dimensions: 40.6 x 20.6 x 3.6 mm Manufacturer: MetavCUT UID: GALA--40.6x20.6x3.6-13207-EW9Co10 Facts Size: 40.6 x 20.6 x 3.6 mm Material grade: 1.3207 EW9Co10 SKU: GALA--40.6x20.6x3.6-13207-EW9Co10 Special features For recycling, shredding and pelletising applications Designed for GALA granulators and shredders Wear-resistant, cobalt-alloyed tool steel Ground cutting edge for reduced fines FAQ What machines is this knife compatible with? The MetavCUT granulator/shredder knife is compatible with recycling systems, shredding lines and pelletiser units from GALA and is designed to match the original blade envelope and fixation. Which materials can be processed with this blade? The knife is intended for typical plastic waste streams used in recycling and granulation; its EW9Co10 composition performs well across a range of polymers and contaminated feedstocks. How does the material affect service life? The 1.3207 EW9Co10 steel provides increased wear resistance and thermal stability, which gives the knife a longer cutting life compared with non‑alloyed steels under similar operating conditions. Can the blade be resharpened? Yes, the blade geometry permits regrinding; resharpening restores edge performance and extends the operational lifespan of the MetavCUT knife when performed to original profiles. What improvement in output quality can be expected? Using a precisely ground MetavCUT granulator/shredder knife typically reduces fines and produces a more uniform particle distribution, supporting improved downstream processing and consistent pellet quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 20.6 x 3.6/2.1 Granulator Knife For GALA Machines, M2 1.3343 DMo5 - MetavCUT
Take advantage of the combination of high wear resistance, precise fit and consistent cutting quality to keep production running smoothly. Order matching replacement blades via Metav Werkzeuge or ask their consultants for application advice. Zerkleinerungsmesser / Granuliermesser 40.6 x 20.6 x 3.6/2.1 — M2 (1.3343 DMo5) wear knife for GALA machines by MetavCUT The Zerkleinerungsmesser / Granuliermesser 40.6 x 20.6 x 3.6/2.1 is a dedicated wear part for GALA recycling and pelletising systems, engineered to provide consistent granulate quality and reduced dust generation Precision ground in M2 1.3343 DMo5 Exact fit for GALA recycling systems Optimised edge geometry for clean cuts Durable wear part for continuous production Consistent pellet quality from a precision blade A consistent pellet size stems from a sharp, accurately profiled cutting edge and a stable blade geometry. Made from M2 1.3343 DMo5, the knife offers a high level of edge retention and dimensional stability, which translates into uniform pellets and fewer fines. Reduced dust formation and even particle distribution help downstream processing, lower filtration load and improve the quality of regranulate used in extrusion or injection moulding. Reduced downtime through robust wear characteristics The use of a proven high-speed steel at the core of the design ensures reliable wear resistance under continuous operation. The blade’s ground surfaces are finished to maintain cutting performance over longer service intervals, supporting predictable maintenance planning and fewer unscheduled stops. As a result, production throughput becomes more reliable and tool-change cycles can be planned around operations rather than reacting to sudden failures. Exact fit and straightforward replacement for GALA equipment With dimensions of 40.6 x 20.6 x 3.6/2.1 mm and a design matched to GALA systems, this granulator blade provides immediate interchangeability with original housings and blade holders. The precise tolerances reduce adjustment work during replacement and ensure correct blade alignment for a stable cutting gap. The result is fast changeovers and reproducible cutting geometry that preserves final pellet consistency for each production batch. Economical sourcing and traceable quality for workshop efficiency Sourcing wear parts from a specialist supplier streamlines procurement and secures a traceable quality channel. MetavCUT parts combine process-oriented design with production-ready durability to support industrial recycling and shredding tasks. Backed by a reliable logistics base in Emmerich, Metav’s distribution ensures consistent availability and supports a consolidated supplier strategy for workshops and contract processors seeking long-term operational stability. Contact Metav Werkzeuge on +49 2822 7131930 or info@metav-werkzeuge.com to arrange supply of MetavCUT granulator knives and expert application guidance for GALA systems Technical data Article number: GALA--40.6x20.6x3.6/2.1-M2-13343-DMo5 Material: M2 1.3343 DMo5 Dimensions: 40.6 x 20.6 x 3.6/2.1 mm Brand: MetavCUT Suitable for: Recycling plants, shredding systems or pelletising systems by GALA Facts Nominal length: 40.6 mm Nominal width: 20.6 mm Thickness: 3.6/2.1 mm SKU: GALA--40.6x20.6x3.6/2.1-M2-13343-DMo5 Special features High-speed steel construction Wear part for granulators and shredders Optimised cutting geometry for low dust and uniform material Engineered for continuous production environments Compatible with GALA machines FAQ Is this knife compatible with GALA granulators and shredders? The MetavCUT granulator knife is designed for direct compatibility with GALA recycling, shredding and pelletising equipment and matches the original mounting dimensions. Which materials can be processed with this blade? The knife made from M2 (1.3343 DMo5) is suitable for a broad range of thermoplastics and common recycling feedstocks; performance depends on feed composition and cutter setup. Can the blade be resharpened or is it a one-time use part? The MetavCUT granulator knife can be resharpened to restore cutting geometry; resharpening intervals depend on application, abrasiveness of the feed and maintenance practice. How does the M2 1.3343 DMo5 material affect service life? M2 high-speed steel provides a balance of hardness and toughness, offering extended edge life under typical granulation loads while maintaining predictable wear patterns. What should be considered when replacing the blade to maintain pellet quality? Maintain correct blade-housing alignment and the original cutting gap; the listed dimensions ensure a repeatable fit when the replacement follows the specified tolerances (see SKU GALA--40.6x20.6x3.6/2.1-M2-13343-DMo5). MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer with our MetavCUT brand an economical alternative to original manufacturer parts: our process-optimised wear parts are precisely matched, long-lasting and specifically developed for productive use.
40.6 x 20.6 x 3.6/2.1 Granulator Knife For GALA Recycling Machines, 1.3207 EW9Co10 - MetavCUT
Robust 1.3207 EW9Co10 alloy, a precisely ground 40.6 x 20.6 x 3.6/2.1 mm profile and direct compatibility with GALA recycling systems deliver consistent cutting performance and improved pellet quality. Order the GALA granulator knife directly via Metav Werkzeuge or ask our consultants if needed. GALA granulator knife 40.6 x 20.6 x 3.6/2.1 – 1.3207 EW9Co10 (MetavCUT) The GALA granulator knife 40.6 x 20.6 x 3.6/2.1 is a precision wear part for GALA shredders and pelletiser systems, engineered from high-alloy 1.3207 EW9Co10 steel for demanding recycling applications. *High-alloy 1.3207 EW9Co10 steel for long life *Precisely ground 40.6 x 20.6 x 3.6/2.1 profile *Designed for GALA shredders and granulators *Ensures uniform pellets with reduced dust Consistent pellets through precision cutting A precisely finished cutting edge ensures uniform pellet quality and predictable material flow in downstream processes. The geometry and finish of the blade control chip size and strand behaviour during cutting, which leads to dust reduction and fewer fines. For recycling and granulating tasks, that stability reduces waste, simplifies sieving and lowers the effort required in subsequent handling and melting steps. Durability that reduces maintenance cycles Manufactured from 1.3207 EW9Co10, the blade benefits from a high-cobalt, wear-resistant composition that maintains edge integrity under abrasive conditions. The result is improved service life and fewer blade changes, which supports higher machine uptime and lower maintenance frequency. Sturdiness and predictable wear behaviour contribute directly to operational efficiency in continuous recycling lines. Exact fit for reliable machine performance The defined 40.6 x 20.6 x 3.6/2.1 mm cross-section and precision grinding ensure an accurate fit in GALA knife holders and rotor assemblies. Correct blade geometry preserves the required clearances and cutting angles, preventing impact damage and uneven wear. When assembly tolerances are kept, cutting forces remain balanced and the machine operates with reduced vibration and improved product consistency. Material and application advantages Optimised for plastic waste processing, the blade design supports shredding of film, sprues, pipes and plate material as well as granulation of extruded strands. The combination of high wear resistance and clean-cutting geometry leads to efficient cutting at typical granulation speeds while helping to maintain melt quality. As a process-optimised spare part from MetavCUT, the knife is intended for productive, industrial use where repeatable results matter. For reliable, long-lived cutting performance choose MetavCUT granulator knives—contact Metav Werkzeuge in Emmerich for availability and tailored technical advice Technical data SKU: GALA--40.6x20.6x3.6/2.1-13207-EW9Co10 Product: GALA granulator knife 40.6 x 20.6 x 3.6/2.1 Manufacturer: MetavCUT Facts Material designation: 1.3207 EW9Co10 Dimensions: 40.6 x 20.6 x 3.6/2.1 mm SKU number: GALA--40.6x20.6x3.6/2.1-13207-EW9Co10 Special features Suitable for GALA recycling, shredding and pelletising systems High-alloy, cobalt-containing tool steel for wear resistance Precision-ground profile for reduced dust and uniform pellets Process-optimised replacement part for industrial use FAQ What machines is this blade compatible with? The GALA granulator knife 40.6 x 20.6 x 3.6/2.1 is designed specifically for GALA recycling and granulation systems and fits knife holders matching these dimensions. What advantages does 1.3207 EW9Co10 offer? The 1.3207 EW9Co10 material combines high wear resistance and thermal stability, which helps the blade maintain edge life and consistent cutting performance in abrasive plastic-processing environments. Can this knife be used for different plastic types? Yes, the knife is suitable for processing a range of plastics such as film, sprues, pipes and plates; geometry and sharpness support consistent granulate quality across common polymer types. How does the blade affect dust and fines generation? The precise ground profile and correct edge geometry promote clean shearing action, which leads to dust reduction and fewer fines compared with worn or improperly matched knives. Is regrinding possible or recommended? Regrinding may be feasible depending on wear history and maintaining original profile tolerances; consult technical advice from Metav Werkzeuge to assess rework options and safe limits. What should be considered when replacing the blade? Ensure the knife holder and counter-knife are in serviceable condition and that the specified 40.6 x 20.6 x 3.6/2.1 mm dimensions are observed to preserve cutting geometry and machine balance. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to original manufacturer parts with our MetavCUT brand: our process-optimised wear parts are precisely matched, durable and designed specifically for productive, industrial use.
Precision-fit recycling knives that keep production moving
Recycling knives — also referred to as shredder blades or granulator knives — are wear parts engineered for size reduction and material preparation in industrial recycling. Metav supplies fit-for-purpose replacement and wear parts under the MetavCUT brand; these are not original parts from the machine manufacturers but are designed for precise compatibility and reliable performance.
Where these knives are used and how they work
Recycling knives perform the cutting and shearing tasks in waste-processing equipment, converting mixed input streams into consistent fractions. Typical applications include shredders, granulators, cutting mills and granulator systems, as well as ancillary equipment such as friction washers and screening machines. Designed geometry and edge preparation determine cutting quality, throughput and resistance to abrasion; tailored blade profiles enable efficient shredding across a wide range of materials while reducing peak loads on shafts and bearings.
Clear benefits for workshop and production managers
- reduced downtime — rapid replacement with ready-to-fit MetavCUT knives lowers machine standstill.
- consistent particle size — optimised blade geometry for predictable downstream processing.
- extended service life — wear-resistant design and quality-controlled production increase run times.
- simplified procurement — common items kept in stock for fast availability.
- adaptability — compatible blade shapes and edge types for different materials and machine concepts.
Metav as the practical partner for precision in recycling
Metav stands for democratisation of precision: a quality filter based in Emmerich that combines decades of expertise with a broad range of industrial supplies. With over 48,000 customers and a catalogue of more than 250,000 products, Metav offers the scale and know-how that workshop managers rely on. The MetavCUT range represents the brand’s own engineered solution for replacement and wear parts in recycling plants, making it a pragmatic choice for organisations seeking dependable alternatives to original equipment.
Technical data (at a glance)
- tailored replacement and wear parts for recycling plants
- common items held in stock for: shredders, granulators, cutting mills, granulator systems, friction washers, screening machines
- MetavCUT own-brand components, not original manufacturer parts
FAQ
Are MetavCUT recycling knives compatible with different machine brands?
MetavCUT recycling knives are engineered as fit-for-purpose replacement parts and are available in profiles and sizes suitable for a wide range of shredder and granulator makes.
How do I choose the right recycling knife or shredder blade for a specific material?
Select a recycling knife based on material hardness, abrasiveness and desired particle size; granulator knives with specific edge geometry are recommended for brittle plastics, while robust blade profiles suit mixed municipal waste.
What maintenance extends the life of granulator knives?
Regular inspection, correct mounting torque and timely rotation or replacement of blades maintain cutting geometry and reduce uneven wear on the machine.
Are these replacement parts original equipment?
No — the recycling knives are MetavCUT own-brand replacement and wear parts, manufactured to provide precise fit and consistent performance without being original manufacturer components.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com