RPMT 10T3MO Indexable Insert for Aluminium - MetavCUT

Take advantage of a compact, screw-in design and proven indexable-insert compatibility to secure consistent milling performance and fast insert changes. Combine the M16 thread and robust Torx locking to reduce downtime—order via Metav Werkzeuge or request tailored advice from our consultants. VT182TM screw-in milling cutter — M16 thread, Ø32 mm (Teknik Makina) A compact VT182TM screw-in milling cutter designed for RPMT 10-12 indexable inserts, offering stable clamping for light to medium milling operations. M16 thread for secure clamping Ø32 mm cutting diameter Compatible with RPMT 10 indexable inserts Torx M3.5x8.5 screws, key T15 Consistent clamping for repeatable finishes The holder's M16 thread and dedicated locking parts ensure a rigid connection to the spindle or arbor, which directly improves repeatability and surface quality. With a locking screw sized M3.5 and a Torx screw M3.5x8.5 driven by a T15 key, the system minimises micro-movement at the insert seat. That mechanical stability translates into fewer reworks and predictable tool life, making the assembly a sound choice where dimensional consistency is critical. Fast insert changes that reduce machine downtime Designed for RPMT 10 indexable inserts, the cutter body accepts standard triangular inserts for quick replacement and economical tooling cycles. Compatibility with established manufacturers such as Mitsubishi allows straightforward sourcing of cutting edges. The indexable concept reduces setup time: worn edges are rotated or swapped without regrinding, improving throughput and keeping machining cells productive in small-batch and mixed-production environments. Compact geometry that balances reach and rigidity With an overall length of 68 mm, cutting height of 36 mm, and a cutting diameter of Ø32 mm, the tool offers a compact profile that limits overhang while providing sufficient engagement for common milling tasks. The shaft and thread geometry produce a low-mass, 0.189 kg assembly that is quick to handle yet engineered for stable cutting. Three cutting edges spread cutting forces evenly, supporting controlled chip formation and extending insert life where consistent chip evacuation is required. Contact Metav Werkzeuge in Emmerich for specification matching or to reserve the VT182TM screw-in milling cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT182TM Manufacturer: Teknik Makina Facts Diameter: 32 mm Total length: 68 mm Cutting height: 36 mm Thread: M16 Thread height: 24.5 mm Number of cutting edges: 3 Weight: 0.189 kg Special features For RPMT 10 indexable inserts Compatible with Mitsubishi inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ Which inserts fit this screw-in cutter? The VT182TM screw-in milling cutter is specified for RPMT 10 indexable inserts and supports RPMT 10–12 styles; Mitsubishi-compatible inserts are confirmed suitable for this holder. What thread and mounting are required? Mounting uses an M16 thread with a 24.5 mm thread height on the VT182TM, providing a secure screw-in connection for standard arbors. How is the insert clamped and serviced? Inserts are secured with a Torx M3.5x8.5 screw; service and replacement require a T15 Torx key and allow fast edge changes without special tools. What machining tasks suit this cutter? The compact geometry with Ø32 mm diameter and three cutting edges makes the VT182TM suitable for light to medium milling operations where rigidity and quick insert exchange are priorities. How does the tool support production efficiency? By combining a robust screw-in mount, standardised RPMT 10 inserts and simple Torx fastening, the VT182TM reduces setup times and maintains consistent cutting performance over repeated cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine the compact M12 screw-in mounting with a 25 mm cutting diameter and compatibility with RPMT 10-12 indexable inserts for repeatable, small‑diameter milling. Order the screw‑in cutter directly via Metav Werkzeuge or consult our technical team for specification advice. VT180TM Screw‑in cutter by Teknik Makina — M12 thread, 25 mm diameter, for RPMT 10-12 inserts VT180TM is a precision screw‑in cutter designed for compact milling tasks and CNC pocketing using RPMT series indexable inserts M12 screw‑in mounting for secure fixture 25 mm cutting diameter for compact milling Compatible with RPMT 10 indexable inserts Lightweight 0.084 kg for fast tool changes Secure mounting for predictable rigidity and repeatability The VT180TM is engineered around an M12 screw‑in connection that provides a compact, rigid interface for short overhang applications. The combination of the M12 thread and a thread height 22 mm ensures stable seating in holders, reducing vibration and improving repeatability on successive parts. The modest overall length of 55 mm and the 25 mm cutting diameter make this tool particularly suited to close‑tolerance pocketing and finishing operations where space and stiffness are critical. The low mass improves dynamic response during spindle acceleration and deceleration. Cost-effective performance with RPMT 10‑12 indexable inserts Compatibility with RPMT 10-12 indexable inserts allows economical turning of cutting edges and quick insert changes to maintain productivity. The head accepts RPMT 10‑sized inserts commonly offered by Mitsubishi, enabling access to a wide range of grades and chip‑breaking geometries for differing materials. The tooling body supports 3 cutting edges, paired with a cutting height 33 mm, to balance material removal with smooth chip evacuation. By using indexable inserts, tool life is effectively extended and downtime for regrinding is eliminated, providing clear cost‑benefit in batch and serial production. Quick serviceability and workshop integration Maintenance and insert changes are straightforward: the cutter uses a locking screw M3,5 and a Torx fixing screw M3,5x8,5 secured with Torx T15, enabling fast, tool‑standardised servicing on the shop floor. At just 0.084 kg, the body is easy to handle during tool set‑up and quick changes, shortening non‑productive time. The compact design integrates readily with common screw‑in holders and small‑diamence tool stations found in CNC milling and general workshop environments, supporting efficient changeover routines and consistent part quality. For compact, reliable M12 screw‑in cutters from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for tailored supply and technical guidance — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: VT180TM Manufacturer: Teknik Makina Product: Screw‑in cutter for RPMT 10-12 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Core specifications Diameter: 25 mm Thread: M12 Total length: 55 mm Cutting height: 33 mm Thread height: 22 mm Cutting edges: 3 Weight: 0.084 kg Special features Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 Compatible inserts: RPMT 10 Insert manufacturer compatibility: Mitsubishi FAQ Is the cutter compatible with RPMT 10 inserts from Mitsubishi? Yes — the VT180TM is specified for RPMT 10-12 indexable inserts and lists Mitsubishi as a compatible insert manufacturer. What mounting thread does the tool use? The tool uses an M12 screw‑in thread with a thread height of 22 mm for secure seating. How many cutting edges does the head support and what is the cutting height? The tool body supports 3 cutting edges and provides a cutting height of 33 mm. Which fastening hardware is required for insert retention? Insert retention uses a locking screw M3,5 together with a Torx screw M3,5x8,5, tightened with a Torx T15 key. Is the VT180TM suited to compact CNC tool stations? Yes — with a 25 mm cutting diameter, 55 mm total length and lightweight construction, the body is optimised for compact CNC setups and short overhang applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com