RPMT 1204MO Indexable Insert for Stahl - MetavCUT

Take advantage of the combination of robust compatibility with RPMT inserts, precise screw-in mounting and a compact, lightweight design to streamline milling setups and reduce changeover time; order directly via Metav Werkzeuge or consult our specialists for application support. Screw-in Cutter VT176TM — 32 mm, M16 thread for RPMT 10–12 indexable inserts by Teknik Makina A Screw-in Cutter VT176TM engineered for efficient indexable-insert milling operations where quick insert replacement and secure screw-in mounting are required 32 mm diameter, M16 screw-in thread Accepts RPMT 10–12 indexable inserts Three cutting edges for balanced cutting Lightweight 0.164 kg for easy handling High compatibility and predictable performance for CNC milling The VT176TM delivers a predictable cutting cycle thanks to its threaded M16 mounting and compatibility with RPMT 10–12 inserts. The screw-in design reduces runout and secures the head in the machine spindle, which helps to maintain a consistent cutting height of 34.7 mm. For production planners this means repeatable tool offsets and simplified tool life calculations; the interface with Mitsubishi RPMT inserts ensures widely available geometries and grades for different workpiece materials. Compact design that improves handling and reduces set-up time A compact overall length of 60 mm and a nominal diameter of 32 mm combine with a weight of 0.164 kg to make the cutter easy to manipulate during tool changes and less demanding on toolholding systems. The three cutting edges are arranged to provide a balanced cut, which moderates vibration and supports improved surface finish without requiring complex toolholders. The included fastening elements — M3.5 locking screw, M3.5x8.5 Torx screw and T15 Torx key — are industry-standard sizes that simplify maintenance and reduce the need for special spares. Clear technical fitment that aids purchase decisions The screw-in head is supplied with a thread height of 25.3 mm and a defined cutting height of 34.7 mm, enabling quick verification against existing tool holders and machine clearances. The three-flute layout is suited to light-to-medium material removal rates where insert indexing and repeatability are priorities. Where tool change frequency or tool inventory is a concern, the VT176TM’s compatibility with common RPMT insert formats reduces SKUs and supports leaner stock management. Practical handling and workshop integration Assembly and replacement follow straightforward mechanical steps: the cutter is torqued into the mating thread and inserts are secured with the supplied Torx screw. The compact mass and reliable fixing help to limit centrifugal imbalance at operational speeds. For workshops integrating this head into existing tool sets, the familiar screw sizes and insert family facilitate rapid training of machinists and reduce the onboarding time for new operations. For tailored procurement advice or to secure the Teknik Makina VT176TM for production use, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for delivery and technical consultation. Technical data SKU: VT176TM Brand: Teknik Makina Type: Screw-in cutter for RPMT 10–12 indexable inserts Compatible inserts: RPMT 12 (Mitsubishi) Facts Diameter: 32 mm Thread: M16 Overall length: 60 mm Thread height: 25.3 mm Cutting height: 34.7 mm Cutting edges: 3 Weight: 0.164 kg Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Special features For RPMT 10–12 indexable inserts Compatible with Mitsubishi inserts Screw-in mounting for reduced runout Three cutting edges for balanced machining Compact and lightweight construction FAQ Is the cutter compatible with standard RPMT inserts? The VT176TM accepts RPMT 10–12 indexable inserts and is specified for RPMT 12 format; compatibility with Mitsubishi RPMT geometries is confirmed in the product data. What is the mounting thread and how deep is it? The cutter uses an M16 screw-in thread with a thread height of 25.3 mm, designed for secure screw-in mounting in compatible toolholders. Which fastening hardware is supplied or required? Assembly requires an M3.5 locking screw, an M3.5x8.5 Torx screw and a T15 Torx key for insert clamping and locking. How many cutting edges does the head have and what is the benefit? The head features three cutting edges, providing a balanced cut that helps to reduce vibration and improve surface finish during light-to-medium milling. Is the VT176TM suitable for high-speed machining? The tool is optimised for reliable insert seating and balanced cutting; suitability for high-speed applications depends on the selected insert grade and machine capability — verify insert recommendations for the intended cutting speed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, reliable clamping and broad insert compatibility for consistent finishing in confined setups; order the VT174TM screw-in cutter directly via Metav Werkzeuge or consult our specialists for application advice. VT174TM screw-in cutter (25 mm, M12 thread) by Teknik Makina The VT174TM is a screw-in cutter designed for RPMT 10–12 indexable inserts, optimised for small-diameter milling and accurate finishing in limited workspaces. Compact 25 mm diameter for tight spaces M12 screw-in shank for secure mounting Compatible with RPMT 10–12 indexable inserts Two cutting edges for efficient material removal Lightweight at 0.109 kg for reduced spindle load High-precision cutting in a compact form The VT174TM combines a 25 mm diameter with a short 55 mm overall length to deliver accurate machining where accessibility is limited. Its compact geometry reduces tool overhang and vibration, which helps maintain a consistent surface finish and prolongs insert life. The tool’s two cutting edges provide a balance between material removal and control, making the cutter suitable for semi-finish and finish passes. For operations requiring repeatable results in small pockets or narrow jaws, this design ensures the required dimensional stability. Secure clamping and straightforward insert handling Clamping is achieved with an M12 screw-in interface and a dedicated M3.5 locking screw system, tightened using a T15 Torx key, which guarantees repeatable seat pressure and simple servicing. The use of standard RPMT 10–12 indexable inserts (RPMT 12) simplifies supply chains and reduces setup time when changing inserts. A driven, indexed insert system allows for rapid replacement and minimal downtime; the combination of M3.5x8.5 Torx screws and accessible tool geometry ensures service can be carried out quickly and safely at the machine. Material compatibility and machining performance Although intended primarily for general milling tasks with RPMT inserts, the cutter’s design supports a range of typical workshop materials when used with the appropriate grade of insert from recognised suppliers such as Mitsubishi. The short thread height of 22 mm and a cutting height of 33 mm provide a stable support for the insert, improving edge life under moderate cutting forces. The lightweight construction (0.109 kg) reduces additional load on the spindle, which is beneficial for high-speed finishing and for machines with lower power reserves. Operational benefits and workshop integration For production environments seeking predictable throughput, the VT174TM offers a compact, easy-to-manage tool body that integrates with existing insert assortments. The screw-in M12 mounting reduces inventory complexity compared with proprietary holders, while compatibility with widespread RPMT 10–12 inserts keeps replenishment straightforward. The tool’s modest mass and short overhang contribute to lower dynamic stress on the machine spindle, assisting with longer-term tool life and reduced maintenance intervals—attributes that support operational efficiency on the shop floor. For tight-space milling tasks trusting Teknik Cutting Tools' VT174TM is recommended—order via Metav Werkzeuge or contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VT174TM Brand: Teknik Makina Product: screw-in cutter for RPMT 10–12 indexable inserts Compatible inserts: RPMT 12 Compatible insert manufacturer: Mitsubishi Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Core specifications Diameter: 25 mm Thread: M12 Overall length: 55 mm Thread height: 22 mm Cutting height: 33 mm Cutting edges: 2 Weight: 0.109 kg Features and compatibility For RPMT 10–12 indexable inserts Suitable for finishing and semi-finish operations Compact design for limited-access machining Standardised fastening for simple maintenance Compatible with Mitsubishi RPMT 12 inserts FAQ Which inserts fit this cutter? The cutter accepts RPMT 10–12 indexable inserts; the body is specified for RPMT 12 sizes and works with common grades from Mitsubishi. How is the insert secured and serviced? Inserts are secured with an M3.5 locking screw tightened with a T15 Torx key; the M3.5x8.5 Torx screw allows quick replacement and reliable clamping. Is the VT174TM suitable for tight internal pockets? Yes — the 25 mm diameter and 55 mm overall length make the tool appropriate for confined spaces where reduced overhang improves stability. What are the key mounting requirements? The tool uses an M12 screw-in shank; ensure the machine arbor or adapter accepts M12 screw-in holders and observe correct mounting torque. Will the cutter suit high-speed finishing? The lightweight body (0.109 kg) and short overhang support high-speed finishing when paired with appropriate inserts and machine parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com