25mm Milling Cutter for APKT 0903 and AXMT 0602 Indexable Inserts, 3 Flutes 60mm Cut Length, 150mm Overall - Teknik Makina

Take advantage of a rigid tool body and quick insert changes to keep cycle times low and surface finish high; the combination of a 25 mm shank and a 60 mm cutting length delivers stability for longer passes while the Torx clamping system reduces downtime. Order the cutter directly via Metav Werkzeuge or contact our consultants for technical clarification.

Shank Milling Cutter S024TM — 25 mm diameter, 3-flute tool for AXMT 0602 & APKT 0903 inserts by Teknik Makina

A compact, indexable-insert shank milling cutter, Shank Milling Cutter S024TM, engineered for insert-based milling with AXMT 0602 and APKT 0903 systems and intended for CNC and shop-floor use

• 25 mm shank diameter
• 3 cutting edges for smooth operation
• 60 mm cutting length
• Torx fastening M2.5×5.5, T8 key

Higher throughput with stable toolholding

The S024TM is designed to convert insert flexibility into process efficiency. The use of indexable inserts such as AXMT 0602 and APKT 0903 allows economical edge changes without regrinding, while the solid 25 mm shank increases tool rigidity for longer unsupported lengths. This combination reduces chatter and supports higher material removal rates, so production runs remain consistent and predictable. The tool body geometry and three-flute layout favour a balance between cutting speed and surface finish.

Reliable insert clamping for minimal downtime

Fast, repeatable clamping is a practical advantage on busy production lines. The cutter secures inserts using a Torx screw M2.5×5.5 tightened with a T8 key, enabling quick replacement and uniform clamping torque across inserts. Consistent clamping reduces the risk of seating errors and uneven wear, translating into fewer interruptions for rework and a steadier output quality over multiple tool changes.

Rigidity and handling that suit series production

With an overall length of 150 mm and a cutting length of 60 mm, this milling cutter is configured to offer a good compromise between reach and stiffness. The three-flute configuration provides efficient chip evacuation while maintaining a clean surface; combined with the tool’s mass (approx. 0.583 kg) and 25 mm diameter, the cutter performs reliably in end-use setups where axis stability and repeatability matter. These attributes are particularly useful for short-to-medium length passes in standard toolholders.

Practical integration and compatibility

The cutter matches common insert families and is supplied for use with inserts from established manufacturers such as Taegutec, simplifying procurement and tool planning. The modular nature of indexable-insert systems means blades can be chosen to suit specific materials and finishes without replacing the entire cutter body, supporting lean stocking and rapid adaptation to changing production needs.

Choose the Teknik Cutting Tools S024TM for a stable, insert-based milling solution and contact Metav Werkzeuge GmbH in Emmerich for availability or detailed specification support: info@metav-werkzeuge.com, +49 2822 7131930

Technical data

• Article number: S024TM
• Manufacturer: Teknik Makina
• ECLASS: 21180806
• ETIM: EC011860

Facts

• Shank diameter: 25 mm
• Cutting length: 60 mm
• Overall length: 150 mm
• Number of cutting edges: 3
• Weight: 0.583 kg
• Diameter: 25 mm

Special features

• For AXMT 0602 and APKT 0903 indexable inserts
• Compatible with Taegutec inserts
• Torx fastening M2.5×5.5
• Torx key size T8

FAQ

Which insert types fit this cutter? The cutter accepts AXMT 0602 and APKT 0903 indexable inserts; it is compatible with inserts from Taegutec as indicated for the S024TM shank milling cutter.

What is the shank diameter and why does it matter? The shank diameter is 25 mm; a larger shank diameter increases rigidity and reduces vibration, improving stability during milling passes.

How many cutting edges does the tool have? This milling cutter has three cutting edges (3 flutes), which balance chip evacuation and surface finish for general milling tasks.

What are the tool’s dimensions for setup planning? The cutter’s overall length is 150 mm with a cutting length of 60 mm; use these values when planning holder selection and tool offsets for CNC programmes.

Which screw and key are required to change inserts? Insert clamping uses a Torx screw specified as M2.5×5.5 and requires a T8 Torx key for secure and repeatable fastening.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com