18mm Cutter For APXT 1003 Indexable Inserts 2 Flutes 90° Cutting Angle 60mm Cutting Length, 16mm Shank - Teknik Makina

Combining an indexable-insert system with a robust 18 mm cutting diameter and a 16 mm shank delivers fast cycle times and dependable tool stability; order via Metav Werkzeuge for dependable supply or consult our specialists for application-specific guidance.

Shank Milling Cutter S184TM — for APXT 1003 indexable inserts, Ø18 mm, 60 mm cutting length (Teknik Makina)

The Shank Milling Cutter S184TM is a precision shank cutter designed for productive milling with APXT 1003 indexable inserts, suited to roughing and semi-finish operations where rapid insert changes and consistent geometry are required.

• Indexable system for APXT 1003 inserts
• 18 mm cutting diameter for versatile milling
• 16 mm shank for stable clamping
• Two cutting edges with 90° cutting angle

Increased machining efficiency through insert technology

The combination of an indexable-insert system and a defined 18 mm cutting diameter reduces downtime for regrinding and keeps spindle utilisation high. Using replaceable APXT 1003 inserts means the cutting edge is renewed within seconds, so cycle times are shortened and process consistency improves. The available 60 mm cutting length supports deeper passes than shorter tools, enabling effective material removal without frequent tool changes. The design focuses on predictable performance on repetitive milling tasks, making the cutter a practical choice where throughput and consistency matter.

Stable toolholding and precise geometry for repeatable results

A solid 16 mm shank gives the necessary rigidity for stable clamping in standard collets or shrink-fit holders, which helps to reduce chatter and improve surface finish. The cutter's relatively low mass (approx. 0.35 kg) and balanced form assist with runout control and tool life. The 90° cutting angle and two cutting edges provide a straightforward cutting geometry that is simple to set up and predictable in behaviour, so technicians can rely on repeatable results across batches without complex parameter tuning.

Fast assembly and clear compatibility for workshop use

Assembly and indexable-insert replacement are kept simple: the cutter uses a Torx screw M2.5x5.5 secured with a T8 torx key, allowing quick, reliable clamping of inserts and minimal downtime during changeover. Compatibility with APXT 1003 inserts — commonly supplied by Korloy — means inserts are readily available from standard distributors, simplifying logistics and inventory management. The design emphasises practical serviceability, making it suitable for both jobbing shops and production environments where quick maintenance is essential.

Practical applications and when to specify this cutter

This shank cutter is intended for general milling tasks that benefit from indexable-insert systems: shoulder milling, pocketing, and medium- to heavy-duty passes where removal rates and fast edge replacement are priorities. Specify the cutter where tooling strategies favour insert-based solutions to reduce tooling cost per edge and to keep machine uptime high. The combination of diameter, cutting length and insert format makes it a flexible option for production lines and workshop setups seeking efficient, repeatable milling without special tooling changes.

Contact Metav Werkzeuge for tailored technical advice and reliable supply of the Teknik Cutting Tools Shank Milling Cutter S184TM; phone +49 2822 7131930 or email info@metav-werkzeuge.com

Technical data

• Article number: S184TM
• Brand: Teknik Makina
• Product: Shank milling cutter for APXT 1003 indexable inserts
• ECLASS: 21180806
• ETIM: EC011860
• Files: 62de7eecbd24461b3d5f7a7d, 62de7e5c0f56dbb4de4dbf0f

Dimensions & core data

• Diameter: 18 mm
• Shank diameter: 16 mm
• Cutting length: 60 mm
• Overall length: 200 mm
• Number of cutting edges: 2
• Cutting angle: 90°
• Weight: 0.35 kg

Compatibility & assembly

• Compatible inserts: APXT 1003
• Compatible insert manufacturer: Korloy
• Torx screw: M2.5x5.5
• Torx key: T8
• Indexable-insert format for quick replacement

FAQ

Which inserts are compatible with this cutter?
The cutter accepts APXT 1003 indexable inserts; Korloy-manufactured APXT 1003 inserts are commonly used with this shank milling cutter S184TM (Teknik Makina).

How is the tool secured in the spindle and how is the insert fixed?
The tool has a 16 mm shank for standard clamping systems; inserts are secured with a Torx screw M2.5x5.5 tightened using a T8 torx key for reliable seating.

What are the main cutting dimensions to consider for programming?
Key dimensions are Ø 18 mm cutting diameter, 60 mm cutting length, and 200 mm overall length; these values guide depth of cut and reach planning for the S184TM cutter.

How many cutting edges does the cutter have and what is the cutting angle?
The cutter is equipped with two cutting edges and a 90° cutting angle, providing a balanced geometry for shoulder and face milling operations.

Is insert replacement quick and suitable for production environments?
Yes — the indexable design and Torx screw fastening enable rapid insert changes, making the Teknik Cutting Tools shank cutter S184TM appropriate for production settings that require short tool-change times.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com