20mm Solid Carbide Cutter For APMT 11T3 Indexable Inserts 2 Flutes 30mm Cutting Length, 90° - Teknik Makina

Take advantage of a rigid Ø20 mm shank combined with a 30 mm effective cutting length for consistent surface quality and reduced vibration; the modular design for APMT 11T3 indexable inserts keeps downtime to a minimum. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations.

S234TM — Shank milling cutter for APMT 11T3 indexable inserts, Ø20 mm, 30 mm cutting length (Teknik Makina)

The S234TM is a shank milling cutter purpose-built to accept APMT 11T3 indexable inserts, providing secure insert clamping and repeatable performance across a wide range of milling tasks

• Shank Ø20 mm for stable clamping
• 30 mm effective cutting length
• Compatible with APMT 11T3 indexable inserts
• Torx M2.5x5.5 screw, T8 key required

High rigidity for predictable cycle times and improved surface finish

A robust holder geometry with a Ø20 mm shank and a 30 mm cutting length translates into greater rigidity at the cutting edge, which reduces chatter and delivers a more consistent finish on workpieces. The combination of these dimensions and a substantial overall length of 210 mm stabilises the tool during deep cuts and interrupted cuts alike. With two cutting edges, index changes are infrequent yet fast, so machining cycles stay predictable and tool costs are kept under control. The measured mass of 0.523 kg contributes to good dynamic balance on modern milling spindles, supporting reproducible results in serial production.

Fast insert changes and economical tooling strategy

The holder is compatible with APMT 11T3 indexable inserts and is listed as suitable for inserts from Korloy, enabling the use of widely available geometries and grades. Insert clamping is secured by a Torx M2.5x5.5 screw; the required key size is T8, allowing quick replacement without special fixtures. Indexable inserts permit multiple cutting edges per insert, so the effective cost per cutting edge is reduced and maintenance becomes a matter of minutes rather than hours. For operations where rapid throughput and low tooling logistics are priorities, this modular approach supports leaner tooling inventories and faster machine turnarounds.

Geometry tuned for right‑angle operations and versatile milling

A 90° cutting angle gives this shank milling cutter natural aptitude for shoulder milling, slotting and milling of right-angled contours with minimal setup complexity. The tool’s geometry balances the need for aggressiveness and control: suitable for light to medium cuts while maintaining edge stability. The two-edged concept supports alternating cutting directions and can improve chip evacuation compared with single-edge designs. Where tight tolerances and square shoulders are required, this configuration helps deliver repeatable dimensional accuracy with reduced rework.

Reliable supply and application support from a precision partner

Sourcing tooling through a specialist distributor offers tangible benefits for production planning. Metav combines a broad product range with a local quality filter based in Emmerich, providing stable supply and documented product integrity for industrial buyers. Established relationships with thousands of customers and a catalogue that covers precision metrology and workshop tooling make procurement simpler and reduce the number of suppliers involved in a project. For buyers evaluating process changes or scaling production, availability and consistent performance data are decisive factors in maintaining uptime and cost control.

Choose the Teknik Cutting Tools S234TM shank milling cutter for robust right‑angle milling and contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930

Technical data

• SKU: S234TM
• Manufacturer: Teknik Makina
• Article name: Shank milling cutter for APMT 11T3 indexable inserts
• ECLASS: 21180806
• ETIM: EC011860

Facts

• Shank diameter: 20 mm
• Cutting length (shank): 30 mm
• Diameter: 20 mm
• Number of cutting edges: 2
• Overall length: 210 mm
• Weight: 0.523 kg
• Cutting angle: 90°

Special features

• Compatible inserts: APMT 11T3
• Suitable insert supplier: Korloy
• Torx screw: M2.5x5.5
• Torx key: T8

FAQ

Which inserts fit this holder?
The holder accepts APMT 11T3 indexable inserts; Korloy grades are listed as compatible and offer a broad choice of chipbreakers and grades.

How is the insert secured in the tool?
Insert clamping is via a Torx M2.5x5.5 screw; a T8 key is required for secure and repeatable fastening.

What operations is the tool geometry best suited to?
The 90° cutting angle and rigid shank make the tool ideal for shoulder milling, slotting and right‑angle work where square corners and consistent surface finish are required.

How does the tool support productivity in serial production?
A combination of Ø20 mm shank rigidity, 30 mm cutting length and two cutting edges reduces vibration, shortens downtime for index changes and contributes to stable cycle times.

Is the tool balanced for high-speed spindles?
With an overall length of 210 mm and a mass of 0.523 kg, the holder offers good dynamic behaviour for typical milling setups; balance will depend on the chosen insert and clamping condition.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com