26mm Solid Carbide End Mill For R390-11T3 Indexable Inserts, 90° Cutting Angle, 4 Flutes, 50mm Cutting Length - Teknik Makina

Take advantage of a high‑precision, insert‑based milling system that combines stable cutting geometry and simple clamping for predictable cycle times; the robust shank and four cutting edges support consistent chip control and long tool life. Order the insert milling cutter directly via Metav Werkzeuge or consult the technical advisers for tailored recommendations.

Shaft milling cutter S595-1TM by Teknik Makina — 26 mm cutting diameter, optimized for R390-11T3 inserts

Shaft milling cutter S595-1TM for light to medium milling operations with R390-11T3 indexable inserts, suited to CNC toolrooms and production environments

• 26 mm cutting diameter
• 25 mm shank diameter
• Compatible with Sandvik R390-11T3 inserts
• Four cutting edges for stable machining

Consistent production through proven geometry

The S595-1TM is designed around a 26 mm cutting circle and a 90° cutting angle to deliver repeatable slotting and face‑milling results. The four cutting edges reduce vibration compared with fewer‑tooth alternatives, which improves surface finish and extends insert life. For planners and production engineers, this means fewer tool changes and more predictable cycle times — a clear efficiency gain when lining up batch runs or mixed lots.

Simple compatibility and secure clamping

Compatibility with R390-11T3 indexable inserts from Sandvik ensures wide availability of grades and chipbreakers for the application spectrum. The insert is secured with an M2.5x7 Torx screw tightened using a T8 key, providing a compact, serviceable clamping solution. Clear identification of insert type and standardised fastening enables fast, error‑resistant changeovers on the shopfloor and straightforward inventory management.

Practical machining benefits and material range

With a 25 mm shank diameter and a 50 mm effective cutting length, the cutter body supports stable toolholding in standard collets and holders, reducing deflection during heavier passes. The combination of shank rigidity and multiple cutting edges favours materials where steady removal rates are required; the geometry facilitates reliable chip evacuation and consistent surface integrity across normal steels and alloyed workpieces.

Handling, maintenance and workshop integration

The body’s overall length of 150 mm and a weight of 0.557 kg make the tool easy to handle while still providing sufficient overhang for many common set‑ups. Routine maintenance is limited to insert and screw replacement; use of the specified Torx key prevents over‑ or under‑torquing. If application data are unclear, Metav’s precision team can advise on insert grade selection and recommended cutting parameters to match the machining task.

Discuss tooling options with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for application advice and to order the Teknik Makina S595-1TM insert milling cutter suited to existing toolholders

Technical Data

• Article number: S595-1TM
• Manufacturer: Teknik Makina
• Compatible inserts: R390-11T3
• Compatible insert maker: Sandvik
• Torx screw: M2.5x7
• Torx key size: T8

Facts

• Diameter: 26 mm
• Shank diameter: 25 mm
• Cutting length (shank): 50 mm
• Overall length: 150 mm
• Cutting edges: 4
• Weight: 0.557 kg
• Cutting angle: 90°

Special features

• Indexable insert system
• Secure Torx fastening
• Suitable for standard collet holders
• Optimised geometry for chip control

FAQ

Which inserts fit this milling body?
The S595-1TM accepts R390-11T3 indexable inserts; compatible grades from Sandvik are commonly used for a range of steels and alloyed materials.

What fastening hardware is required for insert changes?
Insert retention uses an M2.5x7 Torx screw and requires a T8 Torx key for secure clamping on the S595-1TM body.

Is the shank suitable for standard toolholders?
Yes — the 25 mm shank diameter is compatible with standard collet systems and holders typically used in CNC toolrooms for stable mounting.

What benefits do four cutting edges provide?
Four cutting edges balance material removal rate with vibration damping, improving surface finish and extending insert life in continuous or semi‑continuous production.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com