25mm Cutter For XOMX 0602-1204 Indexable Inserts 3 Flutes 70mm Cutting Length, 90° - Teknik Makina

Take advantage of a rigid 25 mm shank and a long 70 mm cutting length that together deliver steady material removal and predictable tool life; compatible with SECO XOMX 1204 indexable inserts for quick insert changes. Order the S645TM directly via Metav Werkzeuge or ask our consultants for tailored application advice.

Shaft milling cutter S645TM — 25 mm shank, 3‑edge indexable‑insert cutter by Teknik Makina

The Shaft milling cutter S645TM is a shank‑mounted milling cutter designed for indexable‑insert machining with XOMX 0602–1204 inserts, suited to demanding production and workshop environments

• 25 mm shank for rigid clamping
• Compatible with SECO XOMX 1204 inserts
• Three cutting edges for smooth cutting
• Torx screw M3.5x8.5, T10 key specified

Constant rigidity for repeatable machining results

The rigid 25 mm shank and a total length of 250 mm combine to reduce vibration and maintain tool stability during heavy cuts. This mechanical stability translates into more consistent surface finishes and longer insert life, which helps to reduce rework and scrap rates. Where machine spindle run‑out and clamp rigidity matter, the solid shank design keeps cutting forces predictable and supports higher feed rates without compromising component tolerances.

Rapid insert changes and controlled chip removal

Equipped for XOMX 1204 indexable inserts and compatible with SECO insert geometry, the cutter uses three cutting edges and a 90° cutting angle to balance chip formation and contact area. The shorter chip pockets and multiple edges allow manufacturers to rotate or replace inserts quickly, minimising downtime. For operators unfamiliar with indexable systems: the cutter accepts pre‑ground inserts that locate precisely, so edge changes restore cutting geometry instantly and preserve batch consistency.

Secure fastening and simple maintenance in production

Fastening is specified as M3.5x8.5 Torx screw with a T10 key, providing a secure, repeatable clamp for each insert change. The standardised screw and key sizes mean maintenance routines can be streamlined and parts stocked easily. Combined with the 70 mm cutting length, this tool reduces tool change frequency and supports longer uninterrupted runs—an advantage in both contract machining and in‑house production. The design suits toolrooms and industrial users seeking a dependable, indexable‑insert solution that reduces process complexity.

Contact Metav Werkzeuge today to discuss the Teknik Makina S645TM, application suitability and insert recommendations; local stock and technical advice are available from Metav Werkzeuge in Emmerich.

Technical data

• Article number: S645TM
• Brand: Teknik Makina
• ECLASS: 21180806
• ETIM: EC011860

Core dimensions

• Diameter: 25 mm
• Shank diameter: 25 mm
• Cutting length: 70 mm
• Overall length: 250 mm
• Weight: 0.856 kg
• Number of cutting edges: 3
• Cutting angle: 90°

Features & compatibility

• For XOMX 0602-1204 indexable inserts (for XOMX 0602-1204 Indexable Inserts)
• Compatible with SECO insert geometry
• Torx screw M3.5x8.5
• Torx key T10
• Three cutting edges for balanced chip control

FAQ

Which inserts fit this cutter?
The cutter accepts XOMX 1204 indexable inserts and is specified for SECO‑compatible geometries; insert designation and size match the S645TM mounting pocket.

What are the main dimensions to consider for setup?
Key dimensions for the S645TM are a 25 mm shank, 70 mm cutting length and 250 mm overall length, which inform clamping and reach requirements.

How many cutting edges does the tool have and what is the cutting angle?
The tool has three cutting edges and a 90° cutting angle, offering balanced engagement and favourable chip segmentation.

What fastening hardware is specified for insert clamping?
Fastening is by M3.5x8.5 Torx screw with a T10 drive, ensuring reproducible clamp force during insert changes.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com